Merge remote-tracking branch 'origin/next' into kvm-ppc-next

Conflicts:
	mm/Kconfig

CMA DMA split and ZSWAP introduction were conflicting, fix up manually.

39 files changed, 3960 insertions, 213 deletions

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index f960a7944553..a8619bfe879e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -58,6 +58,8 @@ obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
 obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
+obj-$(CONFIG_EEH)              += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
+				  eeh_driver.o eeh_event.o eeh_sysfs.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_FA_DUMP)		+= fadump.o
@@ -100,7 +102,7 @@ obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
-pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
+pci64-$(CONFIG_PPC64)		+= pci_dn.o pci-hotplug.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
 				   pci-common.o pci_of_scan.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index a67c76ef5feb..26098c20936d 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -105,9 +105,6 @@ int main(void)
 	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
 #else /* CONFIG_PPC64 */
 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-#endif
 #ifdef CONFIG_SPE
 	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
 	DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
@@ -115,6 +112,9 @@ int main(void)
 	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_PPC64 */
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+#endif
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu));
 #endif
@@ -132,7 +132,6 @@ int main(void)
 	DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier));
 	DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0));
 	DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2));
-	DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra));
 #endif
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch));
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index 92c6b008dd2b..9262cf2bec4b 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -131,7 +131,8 @@ static const char *cache_type_string(const struct cache *cache)
 	return cache_type_info[cache->type].name;
 }
 
-static void __cpuinit cache_init(struct cache *cache, int type, int level, struct device_node *ofnode)
+static void cache_init(struct cache *cache, int type, int level,
+		       struct device_node *ofnode)
 {
 	cache->type = type;
 	cache->level = level;
@@ -140,7 +141,7 @@ static void __cpuinit cache_init(struct cache *cache, int type, int level, struc
 	list_add(&cache->list, &cache_list);
 }
 
-static struct cache *__cpuinit new_cache(int type, int level, struct device_node *ofnode)
+static struct cache *new_cache(int type, int level, struct device_node *ofnode)
 {
 	struct cache *cache;
 
@@ -324,7 +325,8 @@ static bool cache_node_is_unified(const struct device_node *np)
 	return of_get_property(np, "cache-unified", NULL);
 }
 
-static struct cache *__cpuinit cache_do_one_devnode_unified(struct device_node *node, int level)
+static struct cache *cache_do_one_devnode_unified(struct device_node *node,
+						  int level)
 {
 	struct cache *cache;
 
@@ -335,7 +337,8 @@ static struct cache *__cpuinit cache_do_one_devnode_unified(struct device_node *
 	return cache;
 }
 
-static struct cache *__cpuinit cache_do_one_devnode_split(struct device_node *node, int level)
+static struct cache *cache_do_one_devnode_split(struct device_node *node,
+						int level)
 {
 	struct cache *dcache, *icache;
 
@@ -357,7 +360,7 @@ err:
 	return NULL;
 }
 
-static struct cache *__cpuinit cache_do_one_devnode(struct device_node *node, int level)
+static struct cache *cache_do_one_devnode(struct device_node *node, int level)
 {
 	struct cache *cache;
 
@@ -369,7 +372,8 @@ static struct cache *__cpuinit cache_do_one_devnode(struct device_node *node, in
 	return cache;
 }
 
-static struct cache *__cpuinit cache_lookup_or_instantiate(struct device_node *node, int level)
+static struct cache *cache_lookup_or_instantiate(struct device_node *node,
+						 int level)
 {
 	struct cache *cache;
 
@@ -385,7 +389,7 @@ static struct cache *__cpuinit cache_lookup_or_instantiate(struct device_node *n
 	return cache;
 }
 
-static void __cpuinit link_cache_lists(struct cache *smaller, struct cache *bigger)
+static void link_cache_lists(struct cache *smaller, struct cache *bigger)
 {
 	while (smaller->next_local) {
 		if (smaller->next_local == bigger)
@@ -396,13 +400,13 @@ static void __cpuinit link_cache_lists(struct cache *smaller, struct cache *bigg
 	smaller->next_local = bigger;
 }
 
-static void __cpuinit do_subsidiary_caches_debugcheck(struct cache *cache)
+static void do_subsidiary_caches_debugcheck(struct cache *cache)
 {
 	WARN_ON_ONCE(cache->level != 1);
 	WARN_ON_ONCE(strcmp(cache->ofnode->type, "cpu"));
 }
 
-static void __cpuinit do_subsidiary_caches(struct cache *cache)
+static void do_subsidiary_caches(struct cache *cache)
 {
 	struct device_node *subcache_node;
 	int level = cache->level;
@@ -423,7 +427,7 @@ static void __cpuinit do_subsidiary_caches(struct cache *cache)
 	}
 }
 
-static struct cache *__cpuinit cache_chain_instantiate(unsigned int cpu_id)
+static struct cache *cache_chain_instantiate(unsigned int cpu_id)
 {
 	struct device_node *cpu_node;
 	struct cache *cpu_cache = NULL;
@@ -448,7 +452,7 @@ out:
 	return cpu_cache;
 }
 
-static struct cache_dir *__cpuinit cacheinfo_create_cache_dir(unsigned int cpu_id)
+static struct cache_dir *cacheinfo_create_cache_dir(unsigned int cpu_id)
 {
 	struct cache_dir *cache_dir;
 	struct device *dev;
@@ -653,7 +657,7 @@ static struct kobj_type cache_index_type = {
 	.default_attrs = cache_index_default_attrs,
 };
 
-static void __cpuinit cacheinfo_create_index_opt_attrs(struct cache_index_dir *dir)
+static void cacheinfo_create_index_opt_attrs(struct cache_index_dir *dir)
 {
 	const char *cache_name;
 	const char *cache_type;
@@ -696,7 +700,8 @@ static void __cpuinit cacheinfo_create_index_opt_attrs(struct cache_index_dir *d
 	kfree(buf);
 }
 
-static void __cpuinit cacheinfo_create_index_dir(struct cache *cache, int index, struct cache_dir *cache_dir)
+static void cacheinfo_create_index_dir(struct cache *cache, int index,
+				       struct cache_dir *cache_dir)
 {
 	struct cache_index_dir *index_dir;
 	int rc;
@@ -722,7 +727,8 @@ err:
 	kfree(index_dir);
 }
 
-static void __cpuinit cacheinfo_sysfs_populate(unsigned int cpu_id, struct cache *cache_list)
+static void cacheinfo_sysfs_populate(unsigned int cpu_id,
+				     struct cache *cache_list)
 {
 	struct cache_dir *cache_dir;
 	struct cache *cache;
@@ -740,7 +746,7 @@ static void __cpuinit cacheinfo_sysfs_populate(unsigned int cpu_id, struct cache
 	}
 }
 
-void __cpuinit cacheinfo_cpu_online(unsigned int cpu_id)
+void cacheinfo_cpu_online(unsigned int cpu_id)
 {
 	struct cache *cache;
 
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 9ec3fe174cba..779a78c26435 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -69,16 +69,6 @@ void __init setup_kdump_trampoline(void)
 }
 #endif /* CONFIG_NONSTATIC_KERNEL */
 
-static int __init parse_savemaxmem(char *p)
-{
-	if (p)
-		saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
-
-	return 1;
-}
-__setup("savemaxmem=", parse_savemaxmem);
-
-
 static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
                                unsigned long offset, int userbuf)
 {
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
new file mode 100644
index 000000000000..39954fe941b8
--- /dev/null
+++ b/arch/powerpc/kernel/eeh.c
@@ -0,0 +1,1070 @@
+/*
+ * Copyright IBM Corporation 2001, 2005, 2006
+ * Copyright Dave Engebretsen & Todd Inglett 2001
+ * Copyright Linas Vepstas 2005, 2006
+ * Copyright 2001-2012 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <linux/atomic.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/rtas.h>
+
+
+/** Overview:
+ *  EEH, or "Extended Error Handling" is a PCI bridge technology for
+ *  dealing with PCI bus errors that can't be dealt with within the
+ *  usual PCI framework, except by check-stopping the CPU.  Systems
+ *  that are designed for high-availability/reliability cannot afford
+ *  to crash due to a "mere" PCI error, thus the need for EEH.
+ *  An EEH-capable bridge operates by converting a detected error
+ *  into a "slot freeze", taking the PCI adapter off-line, making
+ *  the slot behave, from the OS'es point of view, as if the slot
+ *  were "empty": all reads return 0xff's and all writes are silently
+ *  ignored.  EEH slot isolation events can be triggered by parity
+ *  errors on the address or data busses (e.g. during posted writes),
+ *  which in turn might be caused by low voltage on the bus, dust,
+ *  vibration, humidity, radioactivity or plain-old failed hardware.
+ *
+ *  Note, however, that one of the leading causes of EEH slot
+ *  freeze events are buggy device drivers, buggy device microcode,
+ *  or buggy device hardware.  This is because any attempt by the
+ *  device to bus-master data to a memory address that is not
+ *  assigned to the device will trigger a slot freeze.   (The idea
+ *  is to prevent devices-gone-wild from corrupting system memory).
+ *  Buggy hardware/drivers will have a miserable time co-existing
+ *  with EEH.
+ *
+ *  Ideally, a PCI device driver, when suspecting that an isolation
+ *  event has occurred (e.g. by reading 0xff's), will then ask EEH
+ *  whether this is the case, and then take appropriate steps to
+ *  reset the PCI slot, the PCI device, and then resume operations.
+ *  However, until that day,  the checking is done here, with the
+ *  eeh_check_failure() routine embedded in the MMIO macros.  If
+ *  the slot is found to be isolated, an "EEH Event" is synthesized
+ *  and sent out for processing.
+ */
+
+/* If a device driver keeps reading an MMIO register in an interrupt
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
+ */
+#define EEH_MAX_FAILS	2100000
+
+/* Time to wait for a PCI slot to report status, in milliseconds */
+#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
+
+/* Platform dependent EEH operations */
+struct eeh_ops *eeh_ops = NULL;
+
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
+
+/*
+ * EEH probe mode support. The intention is to support multiple
+ * platforms for EEH. Some platforms like pSeries do PCI emunation
+ * based on device tree. However, other platforms like powernv probe
+ * PCI devices from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for particular
+ * OF node or PCI device so that the corresponding PE would be created
+ * there.
+ */
+int eeh_probe_mode;
+
+/* Lock to avoid races due to multiple reports of an error */
+DEFINE_RAW_SPINLOCK(confirm_error_lock);
+
+/* Buffer for reporting pci register dumps. Its here in BSS, and
+ * not dynamically alloced, so that it ends up in RMO where RTAS
+ * can access it.
+ */
+#define EEH_PCI_REGS_LOG_LEN 4096
+static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
+
+/*
+ * The struct is used to maintain the EEH global statistic
+ * information. Besides, the EEH global statistics will be
+ * exported to user space through procfs
+ */
+struct eeh_stats {
+	u64 no_device;		/* PCI device not found		*/
+	u64 no_dn;		/* OF node not found		*/
+	u64 no_cfg_addr;	/* Config address not found	*/
+	u64 ignored_check;	/* EEH check skipped		*/
+	u64 total_mmio_ffs;	/* Total EEH checks		*/
+	u64 false_positives;	/* Unnecessary EEH checks	*/
+	u64 slot_resets;	/* PE reset			*/
+};
+
+static struct eeh_stats eeh_stats;
+
+#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
+
+/**
+ * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
+ * @edev: device to report data for
+ * @buf: point to buffer in which to log
+ * @len: amount of room in buffer
+ *
+ * This routine captures assorted PCI configuration space data,
+ * and puts them into a buffer for RTAS error logging.
+ */
+static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
+{
+	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	u32 cfg;
+	int cap, i;
+	int n = 0;
+
+	n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
+	printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name);
+
+	eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
+	n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
+	printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
+
+	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
+	n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
+	printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
+
+	if (!dev) {
+		printk(KERN_WARNING "EEH: no PCI device for this of node\n");
+		return n;
+	}
+
+	/* Gather bridge-specific registers */
+	if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
+		eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
+		n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
+		printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
+
+		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
+		n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
+		printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
+	}
+
+	/* Dump out the PCI-X command and status regs */
+	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (cap) {
+		eeh_ops->read_config(dn, cap, 4, &cfg);
+		n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
+		printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
+
+		eeh_ops->read_config(dn, cap+4, 4, &cfg);
+		n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
+		printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
+	}
+
+	/* If PCI-E capable, dump PCI-E cap 10, and the AER */
+	cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (cap) {
+		n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
+		printk(KERN_WARNING
+		       "EEH: PCI-E capabilities and status follow:\n");
+
+		for (i=0; i<=8; i++) {
+			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+			printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
+		}
+
+		cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+		if (cap) {
+			n += scnprintf(buf+n, len-n, "pci-e AER:\n");
+			printk(KERN_WARNING
+			       "EEH: PCI-E AER capability register set follows:\n");
+
+			for (i=0; i<14; i++) {
+				eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+				n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
+				printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
+			}
+		}
+	}
+
+	return n;
+}
+
+/**
+ * eeh_slot_error_detail - Generate combined log including driver log and error log
+ * @pe: EEH PE
+ * @severity: temporary or permanent error log
+ *
+ * This routine should be called to generate the combined log, which
+ * is comprised of driver log and error log. The driver log is figured
+ * out from the config space of the corresponding PCI device, while
+ * the error log is fetched through platform dependent function call.
+ */
+void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
+{
+	size_t loglen = 0;
+	struct eeh_dev *edev;
+	bool valid_cfg_log = true;
+
+	/*
+	 * When the PHB is fenced or dead, it's pointless to collect
+	 * the data from PCI config space because it should return
+	 * 0xFF's. For ER, we still retrieve the data from the PCI
+	 * config space.
+	 */
+	if (eeh_probe_mode_dev() &&
+	    (pe->type & EEH_PE_PHB) &&
+	    (pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)))
+		valid_cfg_log = false;
+
+	if (valid_cfg_log) {
+		eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+		eeh_ops->configure_bridge(pe);
+		eeh_pe_restore_bars(pe);
+
+		pci_regs_buf[0] = 0;
+		eeh_pe_for_each_dev(pe, edev) {
+			loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
+						      EEH_PCI_REGS_LOG_LEN - loglen);
+		}
+	}
+
+	eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
+}
+
+/**
+ * eeh_token_to_phys - Convert EEH address token to phys address
+ * @token: I/O token, should be address in the form 0xA....
+ *
+ * This routine should be called to convert virtual I/O address
+ * to physical one.
+ */
+static inline unsigned long eeh_token_to_phys(unsigned long token)
+{
+	pte_t *ptep;
+	unsigned long pa;
+	int hugepage_shift;
+
+	/*
+	 * We won't find hugepages here, iomem
+	 */
+	ptep = find_linux_pte_or_hugepte(init_mm.pgd, token, &hugepage_shift);
+	if (!ptep)
+		return token;
+	WARN_ON(hugepage_shift);
+	pa = pte_pfn(*ptep) << PAGE_SHIFT;
+
+	return pa | (token & (PAGE_SIZE-1));
+}
+
+/*
+ * On PowerNV platform, we might already have fenced PHB there.
+ * For that case, it's meaningless to recover frozen PE. Intead,
+ * We have to handle fenced PHB firstly.
+ */
+static int eeh_phb_check_failure(struct eeh_pe *pe)
+{
+	struct eeh_pe *phb_pe;
+	unsigned long flags;
+	int ret;
+
+	if (!eeh_probe_mode_dev())
+		return -EPERM;
+
+	/* Find the PHB PE */
+	phb_pe = eeh_phb_pe_get(pe->phb);
+	if (!phb_pe) {
+		pr_warning("%s Can't find PE for PHB#%d\n",
+			   __func__, pe->phb->global_number);
+		return -EEXIST;
+	}
+
+	/* If the PHB has been in problematic state */
+	eeh_serialize_lock(&flags);
+	if (phb_pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)) {
+		ret = 0;
+		goto out;
+	}
+
+	/* Check PHB state */
+	ret = eeh_ops->get_state(phb_pe, NULL);
+	if ((ret < 0) ||
+	    (ret == EEH_STATE_NOT_SUPPORT) ||
+	    (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
+	    (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
+		ret = 0;
+		goto out;
+	}
+
+	/* Isolate the PHB and send event */
+	eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED);
+	eeh_serialize_unlock(flags);
+	eeh_send_failure_event(phb_pe);
+
+	pr_err("EEH: PHB#%x failure detected\n",
+		phb_pe->phb->global_number);
+	dump_stack();
+
+	return 1;
+out:
+	eeh_serialize_unlock(flags);
+	return ret;
+}
+
+/**
+ * eeh_dev_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @edev: eeh device
+ *
+ * Check for an EEH failure for the given device node.  Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze.  This routine
+ * will query firmware for the EEH status.
+ *
+ * Returns 0 if there has not been an EEH error; otherwise returns
+ * a non-zero value and queues up a slot isolation event notification.
+ *
+ * It is safe to call this routine in an interrupt context.
+ */
+int eeh_dev_check_failure(struct eeh_dev *edev)
+{
+	int ret;
+	unsigned long flags;
+	struct device_node *dn;
+	struct pci_dev *dev;
+	struct eeh_pe *pe;
+	int rc = 0;
+	const char *location;
+
+	eeh_stats.total_mmio_ffs++;
+
+	if (!eeh_subsystem_enabled)
+		return 0;
+
+	if (!edev) {
+		eeh_stats.no_dn++;
+		return 0;
+	}
+	dn = eeh_dev_to_of_node(edev);
+	dev = eeh_dev_to_pci_dev(edev);
+	pe = edev->pe;
+
+	/* Access to IO BARs might get this far and still not want checking. */
+	if (!pe) {
+		eeh_stats.ignored_check++;
+		pr_debug("EEH: Ignored check for %s %s\n",
+			eeh_pci_name(dev), dn->full_name);
+		return 0;
+	}
+
+	if (!pe->addr && !pe->config_addr) {
+		eeh_stats.no_cfg_addr++;
+		return 0;
+	}
+
+	/*
+	 * On PowerNV platform, we might already have fenced PHB
+	 * there and we need take care of that firstly.
+	 */
+	ret = eeh_phb_check_failure(pe);
+	if (ret > 0)
+		return ret;
+
+	/* If we already have a pending isolation event for this
+	 * slot, we know it's bad already, we don't need to check.
+	 * Do this checking under a lock; as multiple PCI devices
+	 * in one slot might report errors simultaneously, and we
+	 * only want one error recovery routine running.
+	 */
+	eeh_serialize_lock(&flags);
+	rc = 1;
+	if (pe->state & EEH_PE_ISOLATED) {
+		pe->check_count++;
+		if (pe->check_count % EEH_MAX_FAILS == 0) {
+			location = of_get_property(dn, "ibm,loc-code", NULL);
+			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
+				"location=%s driver=%s pci addr=%s\n",
+				pe->check_count, location,
+				eeh_driver_name(dev), eeh_pci_name(dev));
+			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				eeh_driver_name(dev));
+			dump_stack();
+		}
+		goto dn_unlock;
+	}
+
+	/*
+	 * Now test for an EEH failure.  This is VERY expensive.
+	 * Note that the eeh_config_addr may be a parent device
+	 * in the case of a device behind a bridge, or it may be
+	 * function zero of a multi-function device.
+	 * In any case they must share a common PHB.
+	 */
+	ret = eeh_ops->get_state(pe, NULL);
+
+	/* Note that config-io to empty slots may fail;
+	 * they are empty when they don't have children.
+	 * We will punt with the following conditions: Failure to get
+	 * PE's state, EEH not support and Permanently unavailable
+	 * state, PE is in good state.
+	 */
+	if ((ret < 0) ||
+	    (ret == EEH_STATE_NOT_SUPPORT) ||
+	    (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) ==
+	    (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) {
+		eeh_stats.false_positives++;
+		pe->false_positives++;
+		rc = 0;
+		goto dn_unlock;
+	}
+
+	eeh_stats.slot_resets++;
+
+	/* Avoid repeated reports of this failure, including problems
+	 * with other functions on this device, and functions under
+	 * bridges.
+	 */
+	eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+	eeh_serialize_unlock(flags);
+
+	eeh_send_failure_event(pe);
+
+	/* Most EEH events are due to device driver bugs.  Having
+	 * a stack trace will help the device-driver authors figure
+	 * out what happened.  So print that out.
+	 */
+	pr_err("EEH: Frozen PE#%x detected on PHB#%x\n",
+		pe->addr, pe->phb->global_number);
+	dump_stack();
+
+	return 1;
+
+dn_unlock:
+	eeh_serialize_unlock(flags);
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
+
+/**
+ * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @token: I/O token, should be address in the form 0xA....
+ * @val: value, should be all 1's (XXX why do we need this arg??)
+ *
+ * Check for an EEH failure at the given token address.  Call this
+ * routine if the result of a read was all 0xff's and you want to
+ * find out if this is due to an EEH slot freeze event.  This routine
+ * will query firmware for the EEH status.
+ *
+ * Note this routine is safe to call in an interrupt context.
+ */
+unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	unsigned long addr;
+	struct eeh_dev *edev;
+
+	/* Finding the phys addr + pci device; this is pretty quick. */
+	addr = eeh_token_to_phys((unsigned long __force) token);
+	edev = eeh_addr_cache_get_dev(addr);
+	if (!edev) {
+		eeh_stats.no_device++;
+		return val;
+	}
+
+	eeh_dev_check_failure(edev);
+
+	pci_dev_put(eeh_dev_to_pci_dev(edev));
+	return val;
+}
+
+EXPORT_SYMBOL(eeh_check_failure);
+
+
+/**
+ * eeh_pci_enable - Enable MMIO or DMA transfers for this slot
+ * @pe: EEH PE
+ *
+ * This routine should be called to reenable frozen MMIO or DMA
+ * so that it would work correctly again. It's useful while doing
+ * recovery or log collection on the indicated device.
+ */
+int eeh_pci_enable(struct eeh_pe *pe, int function)
+{
+	int rc;
+
+	rc = eeh_ops->set_option(pe, function);
+	if (rc)
+		pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n",
+			__func__, function, pe->phb->global_number, pe->addr, rc);
+
+	rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+	if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) &&
+	   (function == EEH_OPT_THAW_MMIO))
+		return 0;
+
+	return rc;
+}
+
+/**
+ * pcibios_set_pcie_slot_reset - Set PCI-E reset state
+ * @dev: pci device struct
+ * @state: reset state to enter
+ *
+ * Return value:
+ * 	0 if success
+ */
+int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
+{
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+	struct eeh_pe *pe = edev->pe;
+
+	if (!pe) {
+		pr_err("%s: No PE found on PCI device %s\n",
+			__func__, pci_name(dev));
+		return -EINVAL;
+	}
+
+	switch (state) {
+	case pcie_deassert_reset:
+		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+		break;
+	case pcie_hot_reset:
+		eeh_ops->reset(pe, EEH_RESET_HOT);
+		break;
+	case pcie_warm_reset:
+		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	return 0;
+}
+
+/**
+ * eeh_set_pe_freset - Check the required reset for the indicated device
+ * @data: EEH device
+ * @flag: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collected the information for
+ * the indicated device and its children so that the bunch of the
+ * devices could be reset properly.
+ */
+static void *eeh_set_dev_freset(void *data, void *flag)
+{
+	struct pci_dev *dev;
+	unsigned int *freset = (unsigned int *)flag;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+
+	dev = eeh_dev_to_pci_dev(edev);
+	if (dev)
+		*freset |= dev->needs_freset;
+
+	return NULL;
+}
+
+/**
+ * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second
+ * @pe: EEH PE
+ *
+ * Assert the PCI #RST line for 1/4 second.
+ */
+static void eeh_reset_pe_once(struct eeh_pe *pe)
+{
+	unsigned int freset = 0;
+
+	/* Determine type of EEH reset required for
+	 * Partitionable Endpoint, a hot-reset (1)
+	 * or a fundamental reset (3).
+	 * A fundamental reset required by any device under
+	 * Partitionable Endpoint trumps hot-reset.
+	 */
+	eeh_pe_dev_traverse(pe, eeh_set_dev_freset, &freset);
+
+	if (freset)
+		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
+	else
+		eeh_ops->reset(pe, EEH_RESET_HOT);
+
+	/* The PCI bus requires that the reset be held high for at least
+	 * a 100 milliseconds. We wait a bit longer 'just in case'.
+	 */
+#define PCI_BUS_RST_HOLD_TIME_MSEC 250
+	msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
+
+	/* We might get hit with another EEH freeze as soon as the
+	 * pci slot reset line is dropped. Make sure we don't miss
+	 * these, and clear the flag now.
+	 */
+	eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+
+	eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+
+	/* After a PCI slot has been reset, the PCI Express spec requires
+	 * a 1.5 second idle time for the bus to stabilize, before starting
+	 * up traffic.
+	 */
+#define PCI_BUS_SETTLE_TIME_MSEC 1800
+	msleep(PCI_BUS_SETTLE_TIME_MSEC);
+}
+
+/**
+ * eeh_reset_pe - Reset the indicated PE
+ * @pe: EEH PE
+ *
+ * This routine should be called to reset indicated device, including
+ * PE. A PE might include multiple PCI devices and sometimes PCI bridges
+ * might be involved as well.
+ */
+int eeh_reset_pe(struct eeh_pe *pe)
+{
+	int flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+	int i, rc;
+
+	/* Take three shots at resetting the bus */
+	for (i=0; i<3; i++) {
+		eeh_reset_pe_once(pe);
+
+		rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+		if ((rc & flags) == flags)
+			return 0;
+
+		if (rc < 0) {
+			pr_err("%s: Unrecoverable slot failure on PHB#%d-PE#%x",
+				__func__, pe->phb->global_number, pe->addr);
+			return -1;
+		}
+		pr_err("EEH: bus reset %d failed on PHB#%d-PE#%x, rc=%d\n",
+			i+1, pe->phb->global_number, pe->addr, rc);
+	}
+
+	return -1;
+}
+
+/**
+ * eeh_save_bars - Save device bars
+ * @edev: PCI device associated EEH device
+ *
+ * Save the values of the device bars. Unlike the restore
+ * routine, this routine is *not* recursive. This is because
+ * PCI devices are added individually; but, for the restore,
+ * an entire slot is reset at a time.
+ */
+void eeh_save_bars(struct eeh_dev *edev)
+{
+	int i;
+	struct device_node *dn;
+
+	if (!edev)
+		return;
+	dn = eeh_dev_to_of_node(edev);
+
+	for (i = 0; i < 16; i++)
+		eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
+}
+
+/**
+ * eeh_ops_register - Register platform dependent EEH operations
+ * @ops: platform dependent EEH operations
+ *
+ * Register the platform dependent EEH operation callback
+ * functions. The platform should call this function before
+ * any other EEH operations.
+ */
+int __init eeh_ops_register(struct eeh_ops *ops)
+{
+	if (!ops->name) {
+		pr_warning("%s: Invalid EEH ops name for %p\n",
+			__func__, ops);
+		return -EINVAL;
+	}
+
+	if (eeh_ops && eeh_ops != ops) {
+		pr_warning("%s: EEH ops of platform %s already existing (%s)\n",
+			__func__, eeh_ops->name, ops->name);
+		return -EEXIST;
+	}
+
+	eeh_ops = ops;
+
+	return 0;
+}
+
+/**
+ * eeh_ops_unregister - Unreigster platform dependent EEH operations
+ * @name: name of EEH platform operations
+ *
+ * Unregister the platform dependent EEH operation callback
+ * functions.
+ */
+int __exit eeh_ops_unregister(const char *name)
+{
+	if (!name || !strlen(name)) {
+		pr_warning("%s: Invalid EEH ops name\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (eeh_ops && !strcmp(eeh_ops->name, name)) {
+		eeh_ops = NULL;
+		return 0;
+	}
+
+	return -EEXIST;
+}
+
+/**
+ * eeh_init - EEH initialization
+ *
+ * Initialize EEH by trying to enable it for all of the adapters in the system.
+ * As a side effect we can determine here if eeh is supported at all.
+ * Note that we leave EEH on so failed config cycles won't cause a machine
+ * check.  If a user turns off EEH for a particular adapter they are really
+ * telling Linux to ignore errors.  Some hardware (e.g. POWER5) won't
+ * grant access to a slot if EEH isn't enabled, and so we always enable
+ * EEH for all slots/all devices.
+ *
+ * The eeh-force-off option disables EEH checking globally, for all slots.
+ * Even if force-off is set, the EEH hardware is still enabled, so that
+ * newer systems can boot.
+ */
+int eeh_init(void)
+{
+	struct pci_controller *hose, *tmp;
+	struct device_node *phb;
+	static int cnt = 0;
+	int ret = 0;
+
+	/*
+	 * We have to delay the initialization on PowerNV after
+	 * the PCI hierarchy tree has been built because the PEs
+	 * are figured out based on PCI devices instead of device
+	 * tree nodes
+	 */
+	if (machine_is(powernv) && cnt++ <= 0)
+		return ret;
+
+	/* call platform initialization function */
+	if (!eeh_ops) {
+		pr_warning("%s: Platform EEH operation not found\n",
+			__func__);
+		return -EEXIST;
+	} else if ((ret = eeh_ops->init())) {
+		pr_warning("%s: Failed to call platform init function (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Initialize EEH event */
+	ret = eeh_event_init();
+	if (ret)
+		return ret;
+
+	/* Enable EEH for all adapters */
+	if (eeh_probe_mode_devtree()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node) {
+			phb = hose->dn;
+			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
+		}
+	} else if (eeh_probe_mode_dev()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node)
+			pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
+	} else {
+		pr_warning("%s: Invalid probe mode %d\n",
+			   __func__, eeh_probe_mode);
+		return -EINVAL;
+	}
+
+	/*
+	 * Call platform post-initialization. Actually, It's good chance
+	 * to inform platform that EEH is ready to supply service if the
+	 * I/O cache stuff has been built up.
+	 */
+	if (eeh_ops->post_init) {
+		ret = eeh_ops->post_init();
+		if (ret)
+			return ret;
+	}
+
+	if (eeh_subsystem_enabled)
+		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
+	else
+		pr_warning("EEH: No capable adapters found\n");
+
+	return ret;
+}
+
+core_initcall_sync(eeh_init);
+
+/**
+ * eeh_add_device_early - Enable EEH for the indicated device_node
+ * @dn: device node for which to set up EEH
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ * This routine must be called before any i/o is performed to the
+ * adapter (inluding any config-space i/o).
+ * Whether this actually enables EEH or not for this device depends
+ * on the CEC architecture, type of the device, on earlier boot
+ * command-line arguments & etc.
+ */
+static void eeh_add_device_early(struct device_node *dn)
+{
+	struct pci_controller *phb;
+
+	/*
+	 * If we're doing EEH probe based on PCI device, we
+	 * would delay the probe until late stage because
+	 * the PCI device isn't available this moment.
+	 */
+	if (!eeh_probe_mode_devtree())
+		return;
+
+	if (!of_node_to_eeh_dev(dn))
+		return;
+	phb = of_node_to_eeh_dev(dn)->phb;
+
+	/* USB Bus children of PCI devices will not have BUID's */
+	if (NULL == phb || 0 == phb->buid)
+		return;
+
+	eeh_ops->of_probe(dn, NULL);
+}
+
+/**
+ * eeh_add_device_tree_early - Enable EEH for the indicated device
+ * @dn: device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
+void eeh_add_device_tree_early(struct device_node *dn)
+{
+	struct device_node *sib;
+
+	for_each_child_of_node(dn, sib)
+		eeh_add_device_tree_early(sib);
+	eeh_add_device_early(dn);
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+
+/**
+ * eeh_add_device_late - Perform EEH initialization for the indicated pci device
+ * @dev: pci device for which to set up EEH
+ *
+ * This routine must be used to complete EEH initialization for PCI
+ * devices that were added after system boot (e.g. hotplug, dlpar).
+ */
+static void eeh_add_device_late(struct pci_dev *dev)
+{
+	struct device_node *dn;
+	struct eeh_dev *edev;
+
+	if (!dev || !eeh_subsystem_enabled)
+		return;
+
+	pr_debug("EEH: Adding device %s\n", pci_name(dev));
+
+	dn = pci_device_to_OF_node(dev);
+	edev = of_node_to_eeh_dev(dn);
+	if (edev->pdev == dev) {
+		pr_debug("EEH: Already referenced !\n");
+		return;
+	}
+	WARN_ON(edev->pdev);
+
+	pci_dev_get(dev);
+	edev->pdev = dev;
+	dev->dev.archdata.edev = edev;
+
+	/*
+	 * We have to do the EEH probe here because the PCI device
+	 * hasn't been created yet in the early stage.
+	 */
+	if (eeh_probe_mode_dev())
+		eeh_ops->dev_probe(dev, NULL);
+
+	eeh_addr_cache_insert_dev(dev);
+}
+
+/**
+ * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		eeh_add_device_late(dev);
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+			struct pci_bus *subbus = dev->subordinate;
+			if (subbus)
+				eeh_add_device_tree_late(subbus);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
+
+/**
+ * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to add EEH sysfs files for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_sysfs_files(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		eeh_sysfs_add_device(dev);
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+			struct pci_bus *subbus = dev->subordinate;
+			if (subbus)
+				eeh_add_sysfs_files(subbus);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
+
+/**
+ * eeh_remove_device - Undo EEH setup for the indicated pci device
+ * @dev: pci device to be removed
+ * @purge_pe: remove the PE or not
+ *
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar).  It unregisters
+ * the PCI device from the EEH subsystem.  I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
+ */
+static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+{
+	struct eeh_dev *edev;
+
+	if (!dev || !eeh_subsystem_enabled)
+		return;
+	edev = pci_dev_to_eeh_dev(dev);
+
+	/* Unregister the device with the EEH/PCI address search system */
+	pr_debug("EEH: Removing device %s\n", pci_name(dev));
+
+	if (!edev || !edev->pdev) {
+		pr_debug("EEH: Not referenced !\n");
+		return;
+	}
+	edev->pdev = NULL;
+	dev->dev.archdata.edev = NULL;
+	pci_dev_put(dev);
+
+	eeh_rmv_from_parent_pe(edev, purge_pe);
+	eeh_addr_cache_rmv_dev(dev);
+	eeh_sysfs_remove_device(dev);
+}
+
+/**
+ * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
+ * @dev: PCI device
+ * @purge_pe: remove the corresponding PE or not
+ *
+ * This routine must be called when a device is removed from the
+ * running system through hotplug or dlpar. The corresponding
+ * PCI address cache will be removed.
+ */
+void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
+{
+	struct pci_bus *bus = dev->subordinate;
+	struct pci_dev *child, *tmp;
+
+	eeh_remove_device(dev, purge_pe);
+
+	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+			 eeh_remove_bus_device(child, purge_pe);
+	}
+}
+EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
+
+static int proc_eeh_show(struct seq_file *m, void *v)
+{
+	if (0 == eeh_subsystem_enabled) {
+		seq_printf(m, "EEH Subsystem is globally disabled\n");
+		seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
+	} else {
+		seq_printf(m, "EEH Subsystem is enabled\n");
+		seq_printf(m,
+				"no device=%llu\n"
+				"no device node=%llu\n"
+				"no config address=%llu\n"
+				"check not wanted=%llu\n"
+				"eeh_total_mmio_ffs=%llu\n"
+				"eeh_false_positives=%llu\n"
+				"eeh_slot_resets=%llu\n",
+				eeh_stats.no_device,
+				eeh_stats.no_dn,
+				eeh_stats.no_cfg_addr,
+				eeh_stats.ignored_check,
+				eeh_stats.total_mmio_ffs,
+				eeh_stats.false_positives,
+				eeh_stats.slot_resets);
+	}
+
+	return 0;
+}
+
+static int proc_eeh_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_eeh_show, NULL);
+}
+
+static const struct file_operations proc_eeh_operations = {
+	.open      = proc_eeh_open,
+	.read      = seq_read,
+	.llseek    = seq_lseek,
+	.release   = single_release,
+};
+
+static int __init eeh_init_proc(void)
+{
+	if (machine_is(pseries))
+		proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
+	return 0;
+}
+__initcall(eeh_init_proc);
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
new file mode 100644
index 000000000000..f9ac1232a746
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -0,0 +1,318 @@
+/*
+ * PCI address cache; allows the lookup of PCI devices based on I/O address
+ *
+ * Copyright IBM Corporation 2004
+ * Copyright Linas Vepstas <linas@austin.ibm.com> 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/rbtree.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+
+/**
+ * The pci address cache subsystem.  This subsystem places
+ * PCI device address resources into a red-black tree, sorted
+ * according to the address range, so that given only an i/o
+ * address, the corresponding PCI device can be **quickly**
+ * found. It is safe to perform an address lookup in an interrupt
+ * context; this ability is an important feature.
+ *
+ * Currently, the only customer of this code is the EEH subsystem;
+ * thus, this code has been somewhat tailored to suit EEH better.
+ * In particular, the cache does *not* hold the addresses of devices
+ * for which EEH is not enabled.
+ *
+ * (Implementation Note: The RB tree seems to be better/faster
+ * than any hash algo I could think of for this problem, even
+ * with the penalty of slow pointer chases for d-cache misses).
+ */
+struct pci_io_addr_range {
+	struct rb_node rb_node;
+	unsigned long addr_lo;
+	unsigned long addr_hi;
+	struct eeh_dev *edev;
+	struct pci_dev *pcidev;
+	unsigned int flags;
+};
+
+static struct pci_io_addr_cache {
+	struct rb_root rb_root;
+	spinlock_t piar_lock;
+} pci_io_addr_cache_root;
+
+static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
+{
+	struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
+
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (addr < piar->addr_lo) {
+			n = n->rb_left;
+		} else {
+			if (addr > piar->addr_hi) {
+				n = n->rb_right;
+			} else {
+				pci_dev_get(piar->pcidev);
+				return piar->edev;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_addr_cache_get_dev - Get device, given only address
+ * @addr: mmio (PIO) phys address or i/o port number
+ *
+ * Given an mmio phys address, or a port number, find a pci device
+ * that implements this address.  Be sure to pci_dev_put the device
+ * when finished.  I/O port numbers are assumed to be offset
+ * from zero (that is, they do *not* have pci_io_addr added in).
+ * It is safe to call this function within an interrupt.
+ */
+struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr)
+{
+	struct eeh_dev *edev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	edev = __eeh_addr_cache_get_device(addr);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+	return edev;
+}
+
+#ifdef DEBUG
+/*
+ * Handy-dandy debug print routine, does nothing more
+ * than print out the contents of our addr cache.
+ */
+static void eeh_addr_cache_print(struct pci_io_addr_cache *cache)
+{
+	struct rb_node *n;
+	int cnt = 0;
+
+	n = rb_first(&cache->rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+		pr_debug("PCI: %s addr range %d [%lx-%lx]: %s\n",
+		       (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
+		       piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
+		cnt++;
+		n = rb_next(n);
+	}
+}
+#endif
+
+/* Insert address range into the rb tree. */
+static struct pci_io_addr_range *
+eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+		      unsigned long ahi, unsigned int flags)
+{
+	struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
+	struct rb_node *parent = NULL;
+	struct pci_io_addr_range *piar;
+
+	/* Walk tree, find a place to insert into tree */
+	while (*p) {
+		parent = *p;
+		piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
+		if (ahi < piar->addr_lo) {
+			p = &parent->rb_left;
+		} else if (alo > piar->addr_hi) {
+			p = &parent->rb_right;
+		} else {
+			if (dev != piar->pcidev ||
+			    alo != piar->addr_lo || ahi != piar->addr_hi) {
+				pr_warning("PIAR: overlapping address range\n");
+			}
+			return piar;
+		}
+	}
+	piar = kzalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+	if (!piar)
+		return NULL;
+
+	pci_dev_get(dev);
+	piar->addr_lo = alo;
+	piar->addr_hi = ahi;
+	piar->edev = pci_dev_to_eeh_dev(dev);
+	piar->pcidev = dev;
+	piar->flags = flags;
+
+#ifdef DEBUG
+	pr_debug("PIAR: insert range=[%lx:%lx] dev=%s\n",
+	                  alo, ahi, pci_name(dev));
+#endif
+
+	rb_link_node(&piar->rb_node, parent, p);
+	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
+
+	return piar;
+}
+
+static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
+{
+	struct device_node *dn;
+	struct eeh_dev *edev;
+	int i;
+
+	dn = pci_device_to_OF_node(dev);
+	if (!dn) {
+		pr_warning("PCI: no pci dn found for dev=%s\n", pci_name(dev));
+		return;
+	}
+
+	edev = of_node_to_eeh_dev(dn);
+	if (!edev) {
+		pr_warning("PCI: no EEH dev found for dn=%s\n",
+			dn->full_name);
+		return;
+	}
+
+	/* Skip any devices for which EEH is not enabled. */
+	if (!eeh_probe_mode_dev() && !edev->pe) {
+#ifdef DEBUG
+		pr_info("PCI: skip building address cache for=%s - %s\n",
+			pci_name(dev), dn->full_name);
+#endif
+		return;
+	}
+
+	/* Walk resources on this device, poke them into the tree */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		unsigned long start = pci_resource_start(dev,i);
+		unsigned long end = pci_resource_end(dev,i);
+		unsigned int flags = pci_resource_flags(dev,i);
+
+		/* We are interested only bus addresses, not dma or other stuff */
+		if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
+			 continue;
+		eeh_addr_cache_insert(dev, start, end, flags);
+	}
+}
+
+/**
+ * eeh_addr_cache_insert_dev - Add a device to the address cache
+ * @dev: PCI device whose I/O addresses we are interested in.
+ *
+ * In order to support the fast lookup of devices based on addresses,
+ * we maintain a cache of devices that can be quickly searched.
+ * This routine adds a device to that cache.
+ */
+void eeh_addr_cache_insert_dev(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	/* Ignore PCI bridges */
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+		return;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__eeh_addr_cache_insert_dev(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
+{
+	struct rb_node *n;
+
+restart:
+	n = rb_first(&pci_io_addr_cache_root.rb_root);
+	while (n) {
+		struct pci_io_addr_range *piar;
+		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+		if (piar->pcidev == dev) {
+			rb_erase(n, &pci_io_addr_cache_root.rb_root);
+			pci_dev_put(piar->pcidev);
+			kfree(piar);
+			goto restart;
+		}
+		n = rb_next(n);
+	}
+}
+
+/**
+ * eeh_addr_cache_rmv_dev - remove pci device from addr cache
+ * @dev: device to remove
+ *
+ * Remove a device from the addr-cache tree.
+ * This is potentially expensive, since it will walk
+ * the tree multiple times (once per resource).
+ * But so what; device removal doesn't need to be that fast.
+ */
+void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+	__eeh_addr_cache_rmv_dev(dev);
+	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+/**
+ * eeh_addr_cache_build - Build a cache of I/O addresses
+ *
+ * Build a cache of pci i/o addresses.  This cache will be used to
+ * find the pci device that corresponds to a given address.
+ * This routine scans all pci busses to build the cache.
+ * Must be run late in boot process, after the pci controllers
+ * have been scanned for devices (after all device resources are known).
+ */
+void eeh_addr_cache_build(void)
+{
+	struct device_node *dn;
+	struct eeh_dev *edev;
+	struct pci_dev *dev = NULL;
+
+	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+
+	for_each_pci_dev(dev) {
+		dn = pci_device_to_OF_node(dev);
+		if (!dn)
+			continue;
+
+		edev = of_node_to_eeh_dev(dn);
+		if (!edev)
+			continue;
+
+		pci_dev_get(dev);  /* matching put is in eeh_remove_device() */
+		dev->dev.archdata.edev = edev;
+		edev->pdev = dev;
+
+		eeh_addr_cache_insert_dev(dev);
+
+		eeh_sysfs_add_device(dev);
+	}
+
+#ifdef DEBUG
+	/* Verify tree built up above, echo back the list of addrs. */
+	eeh_addr_cache_print(&pci_io_addr_cache_root);
+#endif
+}
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
new file mode 100644
index 000000000000..1efa28f5fc54
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -0,0 +1,112 @@
+/*
+ * The file intends to implement dynamic creation of EEH device, which will
+ * be bound with OF node and PCI device simutaneously. The EEH devices would
+ * be foundamental information for EEH core components to work proerly. Besides,
+ * We have to support multiple situations where dynamic creation of EEH device
+ * is required:
+ *
+ * 1) Before PCI emunation starts, we need create EEH devices according to the
+ *    PCI sensitive OF nodes.
+ * 2) When PCI emunation is done, we need do the binding between PCI device and
+ *    the associated EEH device.
+ * 3) DR (Dynamic Reconfiguration) would create PCI sensitive OF node. EEH device
+ *    will be created while PCI sensitive OF node is detected from DR.
+ * 4) PCI hotplug needs redoing the binding between PCI device and EEH device. If
+ *    PHB is newly inserted, we also need create EEH devices accordingly.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+/**
+ * eeh_dev_init - Create EEH device according to OF node
+ * @dn: device node
+ * @data: PHB
+ *
+ * It will create EEH device according to the given OF node. The function
+ * might be called by PCI emunation, DR, PHB hotplug.
+ */
+void *eeh_dev_init(struct device_node *dn, void *data)
+{
+	struct pci_controller *phb = data;
+	struct eeh_dev *edev;
+
+	/* Allocate EEH device */
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev) {
+		pr_warning("%s: out of memory\n", __func__);
+		return NULL;
+	}
+
+	/* Associate EEH device with OF node */
+	PCI_DN(dn)->edev = edev;
+	edev->dn  = dn;
+	edev->phb = phb;
+	INIT_LIST_HEAD(&edev->list);
+
+	return NULL;
+}
+
+/**
+ * eeh_dev_phb_init_dynamic - Create EEH devices for devices included in PHB
+ * @phb: PHB
+ *
+ * Scan the PHB OF node and its child association, then create the
+ * EEH devices accordingly
+ */
+void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
+{
+	struct device_node *dn = phb->dn;
+
+	/* EEH PE for PHB */
+	eeh_phb_pe_create(phb);
+
+	/* EEH device for PHB */
+	eeh_dev_init(dn, phb);
+
+	/* EEH devices for children OF nodes */
+	traverse_pci_devices(dn, eeh_dev_init, phb);
+}
+
+/**
+ * eeh_dev_phb_init - Create EEH devices for devices included in existing PHBs
+ *
+ * Scan all the existing PHBs and create EEH devices for their OF
+ * nodes and their children OF nodes
+ */
+static int __init eeh_dev_phb_init(void)
+{
+	struct pci_controller *phb, *tmp;
+
+	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
+		eeh_dev_phb_init_dynamic(phb);
+
+	pr_info("EEH: devices created\n");
+
+	return 0;
+}
+
+core_initcall(eeh_dev_phb_init);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
new file mode 100644
index 000000000000..2b1ce17cae50
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -0,0 +1,661 @@
+/*
+ * PCI Error Recovery Driver for RPA-compliant PPC64 platform.
+ * Copyright IBM Corp. 2004 2005
+ * Copyright Linas Vepstas <linas@linas.org> 2004, 2005
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/**
+ * eeh_pcid_name - Retrieve name of PCI device driver
+ * @pdev: PCI device
+ *
+ * This routine is used to retrieve the name of PCI device driver
+ * if that's valid.
+ */
+static inline const char *eeh_pcid_name(struct pci_dev *pdev)
+{
+	if (pdev && pdev->dev.driver)
+		return pdev->dev.driver->name;
+	return "";
+}
+
+/**
+ * eeh_pcid_get - Get the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is used to retrieve the PCI device driver for
+ * the indicated PCI device. Besides, we will increase the reference
+ * of the PCI device driver to prevent that being unloaded on
+ * the fly. Otherwise, kernel crash would be seen.
+ */
+static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev)
+{
+	if (!pdev || !pdev->driver)
+		return NULL;
+
+	if (!try_module_get(pdev->driver->driver.owner))
+		return NULL;
+
+	return pdev->driver;
+}
+
+/**
+ * eeh_pcid_put - Dereference on the PCI device driver
+ * @pdev: PCI device
+ *
+ * The function is called to do dereference on the PCI device
+ * driver of the indicated PCI device.
+ */
+static inline void eeh_pcid_put(struct pci_dev *pdev)
+{
+	if (!pdev || !pdev->driver)
+		return;
+
+	module_put(pdev->driver->driver.owner);
+}
+
+#if 0
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
+{
+	int i;
+	struct device_node *pc;
+
+	if (!pdn)
+		return;
+	for (i = 0; i < dent; i++)
+		printk(" ");
+	printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
+		pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
+		pdn->eeh_pe_config_addr, pdn->node->full_name);
+	dent += 3;
+	pc = pdn->node->child;
+	while (pc) {
+		print_device_node_tree(PCI_DN(pc), dent);
+		pc = pc->sibling;
+	}
+}
+#endif
+
+/**
+ * eeh_disable_irq - Disable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called when reporting temporary or permanent
+ * error to the particular PCI device to disable interrupt of that
+ * device. If the device has enabled MSI or MSI-X interrupt, we needn't
+ * do real work because EEH should freeze DMA transfers for those PCI
+ * devices encountering EEH errors, which includes MSI or MSI-X.
+ */
+static void eeh_disable_irq(struct pci_dev *dev)
+{
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+
+	/* Don't disable MSI and MSI-X interrupts. They are
+	 * effectively disabled by the DMA Stopped state
+	 * when an EEH error occurs.
+	 */
+	if (dev->msi_enabled || dev->msix_enabled)
+		return;
+
+	if (!irq_has_action(dev->irq))
+		return;
+
+	edev->mode |= EEH_DEV_IRQ_DISABLED;
+	disable_irq_nosync(dev->irq);
+}
+
+/**
+ * eeh_enable_irq - Enable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called to enable interrupt while failed
+ * device could be resumed.
+ */
+static void eeh_enable_irq(struct pci_dev *dev)
+{
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+
+	if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
+		edev->mode &= ~EEH_DEV_IRQ_DISABLED;
+		enable_irq(dev->irq);
+	}
+}
+
+/**
+ * eeh_report_error - Report pci error to each device driver
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * Report an EEH error to each device driver, collect up and
+ * merge the device driver responses. Cumulative response
+ * passed back in "userdata".
+ */
+static void *eeh_report_error(void *data, void *userdata)
+{
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	enum pci_ers_result rc, *res = userdata;
+	struct pci_driver *driver;
+
+	/* We might not have the associated PCI device,
+	 * then we should continue for next one.
+	 */
+	if (!dev) return NULL;
+	dev->error_state = pci_channel_io_frozen;
+
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	eeh_disable_irq(dev);
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->error_detected) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
+
+	rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
+
+	/* A driver that needs a reset trumps all others */
+	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	eeh_pcid_put(dev);
+	return NULL;
+}
+
+/**
+ * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * Tells each device driver that IO ports, MMIO and config space I/O
+ * are now enabled. Collects up and merges the device driver responses.
+ * Cumulative response passed back in "userdata".
+ */
+static void *eeh_report_mmio_enabled(void *data, void *userdata)
+{
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	enum pci_ers_result rc, *res = userdata;
+	struct pci_driver *driver;
+
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->mmio_enabled) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
+
+	rc = driver->err_handler->mmio_enabled(dev);
+
+	/* A driver that needs a reset trumps all others */
+	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	eeh_pcid_put(dev);
+	return NULL;
+}
+
+/**
+ * eeh_report_reset - Tell device that slot has been reset
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This routine must be called while EEH tries to reset particular
+ * PCI device so that the associated PCI device driver could take
+ * some actions, usually to save data the driver needs so that the
+ * driver can work again while the device is recovered.
+ */
+static void *eeh_report_reset(void *data, void *userdata)
+{
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	enum pci_ers_result rc, *res = userdata;
+	struct pci_driver *driver;
+
+	if (!dev) return NULL;
+	dev->error_state = pci_channel_io_normal;
+
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	eeh_enable_irq(dev);
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->slot_reset) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
+
+	rc = driver->err_handler->slot_reset(dev);
+	if ((*res == PCI_ERS_RESULT_NONE) ||
+	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
+	if (*res == PCI_ERS_RESULT_DISCONNECT &&
+	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+	eeh_pcid_put(dev);
+	return NULL;
+}
+
+/**
+ * eeh_report_resume - Tell device to resume normal operations
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This routine must be called to notify the device driver that it
+ * could resume so that the device driver can do some initialization
+ * to make the recovered device work again.
+ */
+static void *eeh_report_resume(void *data, void *userdata)
+{
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	struct pci_driver *driver;
+
+	if (!dev) return NULL;
+	dev->error_state = pci_channel_io_normal;
+
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	eeh_enable_irq(dev);
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->resume) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
+
+	driver->err_handler->resume(dev);
+
+	eeh_pcid_put(dev);
+	return NULL;
+}
+
+/**
+ * eeh_report_failure - Tell device driver that device is dead.
+ * @data: eeh device
+ * @userdata: return value
+ *
+ * This informs the device driver that the device is permanently
+ * dead, and that no further recovery attempts will be made on it.
+ */
+static void *eeh_report_failure(void *data, void *userdata)
+{
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	struct pci_driver *driver;
+
+	if (!dev) return NULL;
+	dev->error_state = pci_channel_io_perm_failure;
+
+	driver = eeh_pcid_get(dev);
+	if (!driver) return NULL;
+
+	eeh_disable_irq(dev);
+
+	if (!driver->err_handler ||
+	    !driver->err_handler->error_detected) {
+		eeh_pcid_put(dev);
+		return NULL;
+	}
+
+	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+	eeh_pcid_put(dev);
+	return NULL;
+}
+
+/**
+ * eeh_reset_device - Perform actual reset of a pci slot
+ * @pe: EEH PE
+ * @bus: PCI bus corresponding to the isolcated slot
+ *
+ * This routine must be called to do reset on the indicated PE.
+ * During the reset, udev might be invoked because those affected
+ * PCI devices will be removed and then added.
+ */
+static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
+{
+	struct timeval tstamp;
+	int cnt, rc;
+
+	/* pcibios will clear the counter; save the value */
+	cnt = pe->freeze_count;
+	tstamp = pe->tstamp;
+
+	/*
+	 * We don't remove the corresponding PE instances because
+	 * we need the information afterwords. The attached EEH
+	 * devices are expected to be attached soon when calling
+	 * into pcibios_add_pci_devices().
+	 */
+	if (bus)
+		__pcibios_remove_pci_devices(bus, 0);
+
+	/* Reset the pci controller. (Asserts RST#; resets config space).
+	 * Reconfigure bridges and devices. Don't try to bring the system
+	 * up if the reset failed for some reason.
+	 */
+	rc = eeh_reset_pe(pe);
+	if (rc)
+		return rc;
+
+	/* Restore PE */
+	eeh_ops->configure_bridge(pe);
+	eeh_pe_restore_bars(pe);
+
+	/* Give the system 5 seconds to finish running the user-space
+	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes,
+	 * this is a hack, but if we don't do this, and try to bring
+	 * the device up before the scripts have taken it down,
+	 * potentially weird things happen.
+	 */
+	if (bus) {
+		ssleep(5);
+		pcibios_add_pci_devices(bus);
+	}
+
+	pe->tstamp = tstamp;
+	pe->freeze_count = cnt;
+
+	return 0;
+}
+
+/* The longest amount of time to wait for a pci device
+ * to come back on line, in seconds.
+ */
+#define MAX_WAIT_FOR_RECOVERY 150
+
+static void eeh_handle_normal_event(struct eeh_pe *pe)
+{
+	struct pci_bus *frozen_bus;
+	int rc = 0;
+	enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+
+	frozen_bus = eeh_pe_bus_get(pe);
+	if (!frozen_bus) {
+		pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
+			__func__, pe->phb->global_number, pe->addr);
+		return;
+	}
+
+	eeh_pe_update_time_stamp(pe);
+	pe->freeze_count++;
+	if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
+		goto excess_failures;
+	pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
+		pe->freeze_count);
+
+	/* Walk the various device drivers attached to this slot through
+	 * a reset sequence, giving each an opportunity to do what it needs
+	 * to accomplish the reset.  Each child gets a report of the
+	 * status ... if any child can't handle the reset, then the entire
+	 * slot is dlpar removed and added.
+	 */
+	pr_info("EEH: Notify device drivers to shutdown\n");
+	eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+
+	/* Get the current PCI slot state. This can take a long time,
+	 * sometimes over 3 seconds for certain systems.
+	 */
+	rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
+	if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
+		pr_warning("EEH: Permanent failure\n");
+		goto hard_fail;
+	}
+
+	/* Since rtas may enable MMIO when posting the error log,
+	 * don't post the error log until after all dev drivers
+	 * have been informed.
+	 */
+	pr_info("EEH: Collect temporary log\n");
+	eeh_slot_error_detail(pe, EEH_LOG_TEMP);
+
+	/* If all device drivers were EEH-unaware, then shut
+	 * down all of the device drivers, and hope they
+	 * go down willingly, without panicing the system.
+	 */
+	if (result == PCI_ERS_RESULT_NONE) {
+		pr_info("EEH: Reset with hotplug activity\n");
+		rc = eeh_reset_device(pe, frozen_bus);
+		if (rc) {
+			pr_warning("%s: Unable to reset, err=%d\n",
+				   __func__, rc);
+			goto hard_fail;
+		}
+	}
+
+	/* If all devices reported they can proceed, then re-enable MMIO */
+	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
+		pr_info("EEH: Enable I/O for affected devices\n");
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+
+		if (rc < 0)
+			goto hard_fail;
+		if (rc) {
+			result = PCI_ERS_RESULT_NEED_RESET;
+		} else {
+			pr_info("EEH: Notify device drivers to resume I/O\n");
+			result = PCI_ERS_RESULT_NONE;
+			eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
+		}
+	}
+
+	/* If all devices reported they can proceed, then re-enable DMA */
+	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
+		pr_info("EEH: Enabled DMA for affected devices\n");
+		rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+
+		if (rc < 0)
+			goto hard_fail;
+		if (rc)
+			result = PCI_ERS_RESULT_NEED_RESET;
+		else
+			result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	/* If any device has a hard failure, then shut off everything. */
+	if (result == PCI_ERS_RESULT_DISCONNECT) {
+		pr_warning("EEH: Device driver gave up\n");
+		goto hard_fail;
+	}
+
+	/* If any device called out for a reset, then reset the slot */
+	if (result == PCI_ERS_RESULT_NEED_RESET) {
+		pr_info("EEH: Reset without hotplug activity\n");
+		rc = eeh_reset_device(pe, NULL);
+		if (rc) {
+			pr_warning("%s: Cannot reset, err=%d\n",
+				   __func__, rc);
+			goto hard_fail;
+		}
+
+		pr_info("EEH: Notify device drivers "
+			"the completion of reset\n");
+		result = PCI_ERS_RESULT_NONE;
+		eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
+	}
+
+	/* All devices should claim they have recovered by now. */
+	if ((result != PCI_ERS_RESULT_RECOVERED) &&
+	    (result != PCI_ERS_RESULT_NONE)) {
+		pr_warning("EEH: Not recovered\n");
+		goto hard_fail;
+	}
+
+	/* Tell all device drivers that they can resume operations */
+	pr_info("EEH: Notify device driver to resume\n");
+	eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
+
+	return;
+
+excess_failures:
+	/*
+	 * About 90% of all real-life EEH failures in the field
+	 * are due to poorly seated PCI cards. Only 10% or so are
+	 * due to actual, failed cards.
+	 */
+	pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
+	       "last hour and has been permanently disabled.\n"
+	       "Please try reseating or replacing it.\n",
+		pe->phb->global_number, pe->addr,
+		pe->freeze_count);
+	goto perm_error;
+
+hard_fail:
+	pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
+	       "Please try reseating or replacing it\n",
+		pe->phb->global_number, pe->addr);
+
+perm_error:
+	eeh_slot_error_detail(pe, EEH_LOG_PERM);
+
+	/* Notify all devices that they're about to go down. */
+	eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
+
+	/* Shut down the device drivers for good. */
+	if (frozen_bus)
+		pcibios_remove_pci_devices(frozen_bus);
+}
+
+static void eeh_handle_special_event(void)
+{
+	struct eeh_pe *pe, *phb_pe;
+	struct pci_bus *bus;
+	struct pci_controller *hose, *tmp;
+	unsigned long flags;
+	int rc = 0;
+
+	/*
+	 * The return value from next_error() has been classified as follows.
+	 * It might be good to enumerate them. However, next_error() is only
+	 * supported by PowerNV platform for now. So it would be fine to use
+	 * integer directly:
+	 *
+	 * 4 - Dead IOC           3 - Dead PHB
+	 * 2 - Fenced PHB         1 - Frozen PE
+	 * 0 - No error found
+	 *
+	 */
+	rc = eeh_ops->next_error(&pe);
+	if (rc <= 0)
+		return;
+
+	switch (rc) {
+	case 4:
+		/* Mark all PHBs in dead state */
+		eeh_serialize_lock(&flags);
+		list_for_each_entry_safe(hose, tmp,
+				&hose_list, list_node) {
+			phb_pe = eeh_phb_pe_get(hose);
+			if (!phb_pe) continue;
+
+			eeh_pe_state_mark(phb_pe,
+				EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+		}
+		eeh_serialize_unlock(flags);
+
+		/* Purge all events */
+		eeh_remove_event(NULL);
+		break;
+	case 3:
+	case 2:
+	case 1:
+		/* Mark the PE in fenced state */
+		eeh_serialize_lock(&flags);
+		if (rc == 3)
+			eeh_pe_state_mark(pe,
+				EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+		else
+			eeh_pe_state_mark(pe,
+				EEH_PE_ISOLATED | EEH_PE_RECOVERING);
+		eeh_serialize_unlock(flags);
+
+		/* Purge all events of the PHB */
+		eeh_remove_event(pe);
+		break;
+	default:
+		pr_err("%s: Invalid value %d from next_error()\n",
+		       __func__, rc);
+		return;
+	}
+
+	/*
+	 * For fenced PHB and frozen PE, it's handled as normal
+	 * event. We have to remove the affected PHBs for dead
+	 * PHB and IOC
+	 */
+	if (rc == 2 || rc == 1)
+		eeh_handle_normal_event(pe);
+	else {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node) {
+			phb_pe = eeh_phb_pe_get(hose);
+			if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD))
+				continue;
+
+			bus = eeh_pe_bus_get(phb_pe);
+			/* Notify all devices that they're about to go down. */
+			eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
+			pcibios_remove_pci_devices(bus);
+		}
+	}
+}
+
+/**
+ * eeh_handle_event - Reset a PCI device after hard lockup.
+ * @pe: EEH PE
+ *
+ * While PHB detects address or data parity errors on particular PCI
+ * slot, the associated PE will be frozen. Besides, DMA's occurring
+ * to wild addresses (which usually happen due to bugs in device
+ * drivers or in PCI adapter firmware) can cause EEH error. #SERR,
+ * #PERR or other misc PCI-related errors also can trigger EEH errors.
+ *
+ * Recovery process consists of unplugging the device driver (which
+ * generated hotplug events to userspace), then issuing a PCI #RST to
+ * the device, then reconfiguring the PCI config space for all bridges
+ * & devices under this slot, and then finally restarting the device
+ * drivers (which cause a second set of hotplug events to go out to
+ * userspace).
+ */
+void eeh_handle_event(struct eeh_pe *pe)
+{
+	if (pe)
+		eeh_handle_normal_event(pe);
+	else
+		eeh_handle_special_event();
+}
diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c
new file mode 100644
index 000000000000..d27c5afc90ae
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_event.c
@@ -0,0 +1,182 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/semaphore.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
+
+/** Overview:
+ *  EEH error states may be detected within exception handlers;
+ *  however, the recovery processing needs to occur asynchronously
+ *  in a normal kernel context and not an interrupt context.
+ *  This pair of routines creates an event and queues it onto a
+ *  work-queue, where a worker thread can drive recovery.
+ */
+
+static DEFINE_SPINLOCK(eeh_eventlist_lock);
+static struct semaphore eeh_eventlist_sem;
+LIST_HEAD(eeh_eventlist);
+
+/**
+ * eeh_event_handler - Dispatch EEH events.
+ * @dummy - unused
+ *
+ * The detection of a frozen slot can occur inside an interrupt,
+ * where it can be hard to do anything about it.  The goal of this
+ * routine is to pull these detection events out of the context
+ * of the interrupt handler, and re-dispatch them for processing
+ * at a later time in a normal context.
+ */
+static int eeh_event_handler(void * dummy)
+{
+	unsigned long flags;
+	struct eeh_event *event;
+	struct eeh_pe *pe;
+
+	while (!kthread_should_stop()) {
+		if (down_interruptible(&eeh_eventlist_sem))
+			break;
+
+		/* Fetch EEH event from the queue */
+		spin_lock_irqsave(&eeh_eventlist_lock, flags);
+		event = NULL;
+		if (!list_empty(&eeh_eventlist)) {
+			event = list_entry(eeh_eventlist.next,
+					   struct eeh_event, list);
+			list_del(&event->list);
+		}
+		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+		if (!event)
+			continue;
+
+		/* We might have event without binding PE */
+		pe = event->pe;
+		if (pe) {
+			eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
+			pr_info("EEH: Detected PCI bus error on PHB#%d-PE#%x\n",
+				 pe->phb->global_number, pe->addr);
+			eeh_handle_event(pe);
+			eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+		} else {
+			eeh_handle_event(NULL);
+		}
+
+		kfree(event);
+	}
+
+	return 0;
+}
+
+/**
+ * eeh_event_init - Start kernel thread to handle EEH events
+ *
+ * This routine is called to start the kernel thread for processing
+ * EEH event.
+ */
+int eeh_event_init(void)
+{
+	struct task_struct *t;
+	int ret = 0;
+
+	/* Initialize semaphore */
+	sema_init(&eeh_eventlist_sem, 0);
+
+	t = kthread_run(eeh_event_handler, NULL, "eehd");
+	if (IS_ERR(t)) {
+		ret = PTR_ERR(t);
+		pr_err("%s: Failed to start EEH daemon (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * eeh_send_failure_event - Generate a PCI error event
+ * @pe: EEH PE
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event(struct eeh_pe *pe)
+{
+	unsigned long flags;
+	struct eeh_event *event;
+
+	event = kzalloc(sizeof(*event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("EEH: out of memory, event not handled\n");
+		return -ENOMEM;
+	}
+	event->pe = pe;
+
+	/* We may or may not be called in an interrupt context */
+	spin_lock_irqsave(&eeh_eventlist_lock, flags);
+	list_add(&event->list, &eeh_eventlist);
+	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
+	/* For EEH deamon to knick in */
+	up(&eeh_eventlist_sem);
+
+	return 0;
+}
+
+/**
+ * eeh_remove_event - Remove EEH event from the queue
+ * @pe: Event binding to the PE
+ *
+ * On PowerNV platform, we might have subsequent coming events
+ * is part of the former one. For that case, those subsequent
+ * coming events are totally duplicated and unnecessary, thus
+ * they should be removed.
+ */
+void eeh_remove_event(struct eeh_pe *pe)
+{
+	unsigned long flags;
+	struct eeh_event *event, *tmp;
+
+	spin_lock_irqsave(&eeh_eventlist_lock, flags);
+	list_for_each_entry_safe(event, tmp, &eeh_eventlist, list) {
+		/*
+		 * If we don't have valid PE passed in, that means
+		 * we already have event corresponding to dead IOC
+		 * and all events should be purged.
+		 */
+		if (!pe) {
+			list_del(&event->list);
+			kfree(event);
+		} else if (pe->type & EEH_PE_PHB) {
+			if (event->pe && event->pe->phb == pe->phb) {
+				list_del(&event->list);
+				kfree(event);
+			}
+		} else if (event->pe == pe) {
+			list_del(&event->list);
+			kfree(event);
+		}
+	}
+	spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+}
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
new file mode 100644
index 000000000000..016588a6f5ed
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -0,0 +1,800 @@
+/*
+ * The file intends to implement PE based on the information from
+ * platforms. Basically, there have 3 types of PEs: PHB/Bus/Device.
+ * All the PEs should be organized as hierarchy tree. The first level
+ * of the tree will be associated to existing PHBs since the particular
+ * PE is only meaningful in one PHB domain.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+static LIST_HEAD(eeh_phb_pe);
+
+/**
+ * eeh_pe_alloc - Allocate PE
+ * @phb: PCI controller
+ * @type: PE type
+ *
+ * Allocate PE instance dynamically.
+ */
+static struct eeh_pe *eeh_pe_alloc(struct pci_controller *phb, int type)
+{
+	struct eeh_pe *pe;
+
+	/* Allocate PHB PE */
+	pe = kzalloc(sizeof(struct eeh_pe), GFP_KERNEL);
+	if (!pe) return NULL;
+
+	/* Initialize PHB PE */
+	pe->type = type;
+	pe->phb = phb;
+	INIT_LIST_HEAD(&pe->child_list);
+	INIT_LIST_HEAD(&pe->child);
+	INIT_LIST_HEAD(&pe->edevs);
+
+	return pe;
+}
+
+/**
+ * eeh_phb_pe_create - Create PHB PE
+ * @phb: PCI controller
+ *
+ * The function should be called while the PHB is detected during
+ * system boot or PCI hotplug in order to create PHB PE.
+ */
+int eeh_phb_pe_create(struct pci_controller *phb)
+{
+	struct eeh_pe *pe;
+
+	/* Allocate PHB PE */
+	pe = eeh_pe_alloc(phb, EEH_PE_PHB);
+	if (!pe) {
+		pr_err("%s: out of memory!\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Put it into the list */
+	list_add_tail(&pe->child, &eeh_phb_pe);
+
+	pr_debug("EEH: Add PE for PHB#%d\n", phb->global_number);
+
+	return 0;
+}
+
+/**
+ * eeh_phb_pe_get - Retrieve PHB PE based on the given PHB
+ * @phb: PCI controller
+ *
+ * The overall PEs form hierarchy tree. The first layer of the
+ * hierarchy tree is composed of PHB PEs. The function is used
+ * to retrieve the corresponding PHB PE according to the given PHB.
+ */
+struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb)
+{
+	struct eeh_pe *pe;
+
+	list_for_each_entry(pe, &eeh_phb_pe, child) {
+		/*
+		 * Actually, we needn't check the type since
+		 * the PE for PHB has been determined when that
+		 * was created.
+		 */
+		if ((pe->type & EEH_PE_PHB) && pe->phb == phb)
+			return pe;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_next - Retrieve the next PE in the tree
+ * @pe: current PE
+ * @root: root PE
+ *
+ * The function is used to retrieve the next PE in the
+ * hierarchy PE tree.
+ */
+static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
+				  struct eeh_pe *root)
+{
+	struct list_head *next = pe->child_list.next;
+
+	if (next == &pe->child_list) {
+		while (1) {
+			if (pe == root)
+				return NULL;
+			next = pe->child.next;
+			if (next != &pe->parent->child_list)
+				break;
+			pe = pe->parent;
+		}
+	}
+
+	return list_entry(next, struct eeh_pe, child);
+}
+
+/**
+ * eeh_pe_traverse - Traverse PEs in the specified PHB
+ * @root: root PE
+ * @fn: callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the specified PE and its
+ * child PEs. The traversing is to be terminated once the
+ * callback returns something other than NULL, or no more PEs
+ * to be traversed.
+ */
+static void *eeh_pe_traverse(struct eeh_pe *root,
+			eeh_traverse_func fn, void *flag)
+{
+	struct eeh_pe *pe;
+	void *ret;
+
+	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+		ret = fn(pe, flag);
+		if (ret) return ret;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_dev_traverse - Traverse the devices from the PE
+ * @root: EEH PE
+ * @fn: function callback
+ * @flag: extra parameter to callback
+ *
+ * The function is used to traverse the devices of the specified
+ * PE and its child PEs.
+ */
+void *eeh_pe_dev_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag)
+{
+	struct eeh_pe *pe;
+	struct eeh_dev *edev;
+	void *ret;
+
+	if (!root) {
+		pr_warning("%s: Invalid PE %p\n", __func__, root);
+		return NULL;
+	}
+
+	/* Traverse root PE */
+	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
+		eeh_pe_for_each_dev(pe, edev) {
+			ret = fn(edev, flag);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * __eeh_pe_get - Check the PE address
+ * @data: EEH PE
+ * @flag: EEH device
+ *
+ * For one particular PE, it can be identified by PE address
+ * or tranditional BDF address. BDF address is composed of
+ * Bus/Device/Function number. The extra data referred by flag
+ * indicates which type of address should be used.
+ */
+static void *__eeh_pe_get(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	struct eeh_dev *edev = (struct eeh_dev *)flag;
+
+	/* Unexpected PHB PE */
+	if (pe->type & EEH_PE_PHB)
+		return NULL;
+
+	/* We prefer PE address */
+	if (edev->pe_config_addr &&
+	   (edev->pe_config_addr == pe->addr))
+		return pe;
+
+	/* Try BDF address */
+	if (edev->config_addr &&
+	   (edev->config_addr == pe->config_addr))
+		return pe;
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_get - Search PE based on the given address
+ * @edev: EEH device
+ *
+ * Search the corresponding PE based on the specified address which
+ * is included in the eeh device. The function is used to check if
+ * the associated PE has been created against the PE address. It's
+ * notable that the PE address has 2 format: traditional PE address
+ * which is composed of PCI bus/device/function number, or unified
+ * PE address.
+ */
+struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
+{
+	struct eeh_pe *root = eeh_phb_pe_get(edev->phb);
+	struct eeh_pe *pe;
+
+	pe = eeh_pe_traverse(root, __eeh_pe_get, edev);
+
+	return pe;
+}
+
+/**
+ * eeh_pe_get_parent - Retrieve the parent PE
+ * @edev: EEH device
+ *
+ * The whole PEs existing in the system are organized as hierarchy
+ * tree. The function is used to retrieve the parent PE according
+ * to the parent EEH device.
+ */
+static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
+{
+	struct device_node *dn;
+	struct eeh_dev *parent;
+
+	/*
+	 * It might have the case for the indirect parent
+	 * EEH device already having associated PE, but
+	 * the direct parent EEH device doesn't have yet.
+	 */
+	dn = edev->dn->parent;
+	while (dn) {
+		/* We're poking out of PCI territory */
+		if (!PCI_DN(dn)) return NULL;
+
+		parent = of_node_to_eeh_dev(dn);
+		/* We're poking out of PCI territory */
+		if (!parent) return NULL;
+
+		if (parent->pe)
+			return parent->pe;
+
+		dn = dn->parent;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_add_to_parent_pe - Add EEH device to parent PE
+ * @edev: EEH device
+ *
+ * Add EEH device to the parent PE. If the parent PE already
+ * exists, the PE type will be changed to EEH_PE_BUS. Otherwise,
+ * we have to create new PE to hold the EEH device and the new
+ * PE will be linked to its parent PE as well.
+ */
+int eeh_add_to_parent_pe(struct eeh_dev *edev)
+{
+	struct eeh_pe *pe, *parent;
+
+	/*
+	 * Search the PE has been existing or not according
+	 * to the PE address. If that has been existing, the
+	 * PE should be composed of PCI bus and its subordinate
+	 * components.
+	 */
+	pe = eeh_pe_get(edev);
+	if (pe && !(pe->type & EEH_PE_INVALID)) {
+		if (!edev->pe_config_addr) {
+			pr_err("%s: PE with addr 0x%x already exists\n",
+				__func__, edev->config_addr);
+			return -EEXIST;
+		}
+
+		/* Mark the PE as type of PCI bus */
+		pe->type = EEH_PE_BUS;
+		edev->pe = pe;
+
+		/* Put the edev to PE */
+		list_add_tail(&edev->list, &pe->edevs);
+		pr_debug("EEH: Add %s to Bus PE#%x\n",
+			edev->dn->full_name, pe->addr);
+
+		return 0;
+	} else if (pe && (pe->type & EEH_PE_INVALID)) {
+		list_add_tail(&edev->list, &pe->edevs);
+		edev->pe = pe;
+		/*
+		 * We're running to here because of PCI hotplug caused by
+		 * EEH recovery. We need clear EEH_PE_INVALID until the top.
+		 */
+		parent = pe;
+		while (parent) {
+			if (!(parent->type & EEH_PE_INVALID))
+				break;
+			parent->type &= ~EEH_PE_INVALID;
+			parent = parent->parent;
+		}
+		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+			edev->dn->full_name, pe->addr, pe->parent->addr);
+
+		return 0;
+	}
+
+	/* Create a new EEH PE */
+	pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
+	if (!pe) {
+		pr_err("%s: out of memory!\n", __func__);
+		return -ENOMEM;
+	}
+	pe->addr	= edev->pe_config_addr;
+	pe->config_addr	= edev->config_addr;
+
+	/*
+	 * While doing PE reset, we probably hot-reset the
+	 * upstream bridge. However, the PCI devices including
+	 * the associated EEH devices might be removed when EEH
+	 * core is doing recovery. So that won't safe to retrieve
+	 * the bridge through downstream EEH device. We have to
+	 * trace the parent PCI bus, then the upstream bridge.
+	 */
+	if (eeh_probe_mode_dev())
+		pe->bus = eeh_dev_to_pci_dev(edev)->bus;
+
+	/*
+	 * Put the new EEH PE into hierarchy tree. If the parent
+	 * can't be found, the newly created PE will be attached
+	 * to PHB directly. Otherwise, we have to associate the
+	 * PE with its parent.
+	 */
+	parent = eeh_pe_get_parent(edev);
+	if (!parent) {
+		parent = eeh_phb_pe_get(edev->phb);
+		if (!parent) {
+			pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",
+				__func__, edev->phb->global_number);
+			edev->pe = NULL;
+			kfree(pe);
+			return -EEXIST;
+		}
+	}
+	pe->parent = parent;
+
+	/*
+	 * Put the newly created PE into the child list and
+	 * link the EEH device accordingly.
+	 */
+	list_add_tail(&pe->child, &parent->child_list);
+	list_add_tail(&edev->list, &pe->edevs);
+	edev->pe = pe;
+	pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
+		edev->dn->full_name, pe->addr, pe->parent->addr);
+
+	return 0;
+}
+
+/**
+ * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
+ * @edev: EEH device
+ * @purge_pe: remove PE or not
+ *
+ * The PE hierarchy tree might be changed when doing PCI hotplug.
+ * Also, the PCI devices or buses could be removed from the system
+ * during EEH recovery. So we have to call the function remove the
+ * corresponding PE accordingly if necessary.
+ */
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+{
+	struct eeh_pe *pe, *parent, *child;
+	int cnt;
+
+	if (!edev->pe) {
+		pr_warning("%s: No PE found for EEH device %s\n",
+			__func__, edev->dn->full_name);
+		return -EEXIST;
+	}
+
+	/* Remove the EEH device */
+	pe = edev->pe;
+	edev->pe = NULL;
+	list_del(&edev->list);
+
+	/*
+	 * Check if the parent PE includes any EEH devices.
+	 * If not, we should delete that. Also, we should
+	 * delete the parent PE if it doesn't have associated
+	 * child PEs and EEH devices.
+	 */
+	while (1) {
+		parent = pe->parent;
+		if (pe->type & EEH_PE_PHB)
+			break;
+
+		if (purge_pe) {
+			if (list_empty(&pe->edevs) &&
+			    list_empty(&pe->child_list)) {
+				list_del(&pe->child);
+				kfree(pe);
+			} else {
+				break;
+			}
+		} else {
+			if (list_empty(&pe->edevs)) {
+				cnt = 0;
+				list_for_each_entry(child, &pe->child_list, child) {
+					if (!(child->type & EEH_PE_INVALID)) {
+						cnt++;
+						break;
+					}
+				}
+
+				if (!cnt)
+					pe->type |= EEH_PE_INVALID;
+				else
+					break;
+			}
+		}
+
+		pe = parent;
+	}
+
+	return 0;
+}
+
+/**
+ * eeh_pe_update_time_stamp - Update PE's frozen time stamp
+ * @pe: EEH PE
+ *
+ * We have time stamp for each PE to trace its time of getting
+ * frozen in last hour. The function should be called to update
+ * the time stamp on first error of the specific PE. On the other
+ * handle, we needn't account for errors happened in last hour.
+ */
+void eeh_pe_update_time_stamp(struct eeh_pe *pe)
+{
+	struct timeval tstamp;
+
+	if (!pe) return;
+
+	if (pe->freeze_count <= 0) {
+		pe->freeze_count = 0;
+		do_gettimeofday(&pe->tstamp);
+	} else {
+		do_gettimeofday(&tstamp);
+		if (tstamp.tv_sec - pe->tstamp.tv_sec > 3600) {
+			pe->tstamp = tstamp;
+			pe->freeze_count = 0;
+		}
+	}
+}
+
+/**
+ * __eeh_pe_state_mark - Mark the state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to mark the indicated state for the given
+ * PE. Also, the associated PCI devices will be put into IO frozen
+ * state as well.
+ */
+static void *__eeh_pe_state_mark(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	int state = *((int *)flag);
+	struct eeh_dev *tmp;
+	struct pci_dev *pdev;
+
+	/*
+	 * Mark the PE with the indicated state. Also,
+	 * the associated PCI device will be put into
+	 * I/O frozen state to avoid I/O accesses from
+	 * the PCI device driver.
+	 */
+	pe->state |= state;
+	eeh_pe_for_each_dev(pe, tmp) {
+		pdev = eeh_dev_to_pci_dev(tmp);
+		if (pdev)
+			pdev->error_state = pci_channel_io_frozen;
+	}
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_state_mark - Mark specified state for PE and its associated device
+ * @pe: EEH PE
+ *
+ * EEH error affects the current PE and its child PEs. The function
+ * is used to mark appropriate state for the affected PEs and the
+ * associated devices.
+ */
+void eeh_pe_state_mark(struct eeh_pe *pe, int state)
+{
+	eeh_pe_traverse(pe, __eeh_pe_state_mark, &state);
+}
+
+/**
+ * __eeh_pe_state_clear - Clear state for the PE
+ * @data: EEH PE
+ * @flag: state
+ *
+ * The function is used to clear the indicated state from the
+ * given PE. Besides, we also clear the check count of the PE
+ * as well.
+ */
+static void *__eeh_pe_state_clear(void *data, void *flag)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	int state = *((int *)flag);
+
+	pe->state &= ~state;
+	pe->check_count = 0;
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_state_clear - Clear state for the PE and its children
+ * @pe: PE
+ * @state: state to be cleared
+ *
+ * When the PE and its children has been recovered from error,
+ * we need clear the error state for that. The function is used
+ * for the purpose.
+ */
+void eeh_pe_state_clear(struct eeh_pe *pe, int state)
+{
+	eeh_pe_traverse(pe, __eeh_pe_state_clear, &state);
+}
+
+/*
+ * Some PCI bridges (e.g. PLX bridges) have primary/secondary
+ * buses assigned explicitly by firmware, and we probably have
+ * lost that after reset. So we have to delay the check until
+ * the PCI-CFG registers have been restored for the parent
+ * bridge.
+ *
+ * Don't use normal PCI-CFG accessors, which probably has been
+ * blocked on normal path during the stage. So we need utilize
+ * eeh operations, which is always permitted.
+ */
+static void eeh_bridge_check_link(struct pci_dev *pdev,
+				  struct device_node *dn)
+{
+	int cap;
+	uint32_t val;
+	int timeout = 0;
+
+	/*
+	 * We only check root port and downstream ports of
+	 * PCIe switches
+	 */
+	if (!pci_is_pcie(pdev) ||
+	    (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
+	     pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
+		return;
+
+	pr_debug("%s: Check PCIe link for %s ...\n",
+		 __func__, pci_name(pdev));
+
+	/* Check slot status */
+	cap = pdev->pcie_cap;
+	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
+	if (!(val & PCI_EXP_SLTSTA_PDS)) {
+		pr_debug("  No card in the slot (0x%04x) !\n", val);
+		return;
+	}
+
+	/* Check power status if we have the capability */
+	eeh_ops->read_config(dn, cap + PCI_EXP_SLTCAP, 2, &val);
+	if (val & PCI_EXP_SLTCAP_PCP) {
+		eeh_ops->read_config(dn, cap + PCI_EXP_SLTCTL, 2, &val);
+		if (val & PCI_EXP_SLTCTL_PCC) {
+			pr_debug("  In power-off state, power it on ...\n");
+			val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
+			val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
+			eeh_ops->write_config(dn, cap + PCI_EXP_SLTCTL, 2, val);
+			msleep(2 * 1000);
+		}
+	}
+
+	/* Enable link */
+	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCTL, 2, &val);
+	val &= ~PCI_EXP_LNKCTL_LD;
+	eeh_ops->write_config(dn, cap + PCI_EXP_LNKCTL, 2, val);
+
+	/* Check link */
+	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCAP, 4, &val);
+	if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
+		pr_debug("  No link reporting capability (0x%08x) \n", val);
+		msleep(1000);
+		return;
+	}
+
+	/* Wait the link is up until timeout (5s) */
+	timeout = 0;
+	while (timeout < 5000) {
+		msleep(20);
+		timeout += 20;
+
+		eeh_ops->read_config(dn, cap + PCI_EXP_LNKSTA, 2, &val);
+		if (val & PCI_EXP_LNKSTA_DLLLA)
+			break;
+	}
+
+	if (val & PCI_EXP_LNKSTA_DLLLA)
+		pr_debug("  Link up (%s)\n",
+			 (val & PCI_EXP_LNKSTA_CLS_2_5GB) ? "2.5GB" : "5GB");
+	else
+		pr_debug("  Link not ready (0x%04x)\n", val);
+}
+
+#define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
+#define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
+
+static void eeh_restore_bridge_bars(struct pci_dev *pdev,
+				    struct eeh_dev *edev,
+				    struct device_node *dn)
+{
+	int i;
+
+	/*
+	 * Device BARs: 0x10 - 0x18
+	 * Bus numbers and windows: 0x18 - 0x30
+	 */
+	for (i = 4; i < 13; i++)
+		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+	/* Rom: 0x38 */
+	eeh_ops->write_config(dn, 14*4, 4, edev->config_space[14]);
+
+	/* Cache line & Latency timer: 0xC 0xD */
+	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+                SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+        eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+                SAVED_BYTE(PCI_LATENCY_TIMER));
+	/* Max latency, min grant, interrupt ping and line: 0x3C */
+	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+
+	/* PCI Command: 0x4 */
+	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
+
+	/* Check the PCIe link is ready */
+	eeh_bridge_check_link(pdev, dn);
+}
+
+static void eeh_restore_device_bars(struct eeh_dev *edev,
+				    struct device_node *dn)
+{
+	int i;
+	u32 cmd;
+
+	for (i = 4; i < 10; i++)
+		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+	/* 12 == Expansion ROM Address */
+	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
+
+	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+		SAVED_BYTE(PCI_CACHE_LINE_SIZE));
+	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+		SAVED_BYTE(PCI_LATENCY_TIMER));
+
+	/* max latency, min grant, interrupt pin and line */
+	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+
+	/*
+	 * Restore PERR & SERR bits, some devices require it,
+	 * don't touch the other command bits
+	 */
+	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+	if (edev->config_space[1] & PCI_COMMAND_PARITY)
+		cmd |= PCI_COMMAND_PARITY;
+	else
+		cmd &= ~PCI_COMMAND_PARITY;
+	if (edev->config_space[1] & PCI_COMMAND_SERR)
+		cmd |= PCI_COMMAND_SERR;
+	else
+		cmd &= ~PCI_COMMAND_SERR;
+	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
+}
+
+/**
+ * eeh_restore_one_device_bars - Restore the Base Address Registers for one device
+ * @data: EEH device
+ * @flag: Unused
+ *
+ * Loads the PCI configuration space base address registers,
+ * the expansion ROM base address, the latency timer, and etc.
+ * from the saved values in the device node.
+ */
+static void *eeh_restore_one_device_bars(void *data, void *flag)
+{
+	struct pci_dev *pdev = NULL;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct device_node *dn = eeh_dev_to_of_node(edev);
+
+	/* Trace the PCI bridge */
+	if (eeh_probe_mode_dev()) {
+		pdev = eeh_dev_to_pci_dev(edev);
+		if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+                        pdev = NULL;
+        }
+
+	if (pdev)
+		eeh_restore_bridge_bars(pdev, edev, dn);
+	else
+		eeh_restore_device_bars(edev, dn);
+
+	return NULL;
+}
+
+/**
+ * eeh_pe_restore_bars - Restore the PCI config space info
+ * @pe: EEH PE
+ *
+ * This routine performs a recursive walk to the children
+ * of this device as well.
+ */
+void eeh_pe_restore_bars(struct eeh_pe *pe)
+{
+	/*
+	 * We needn't take the EEH lock since eeh_pe_dev_traverse()
+	 * will take that.
+	 */
+	eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL);
+}
+
+/**
+ * eeh_pe_bus_get - Retrieve PCI bus according to the given PE
+ * @pe: EEH PE
+ *
+ * Retrieve the PCI bus according to the given PE. Basically,
+ * there're 3 types of PEs: PHB/Bus/Device. For PHB PE, the
+ * primary PCI bus will be retrieved. The parent bus will be
+ * returned for BUS PE. However, we don't have associated PCI
+ * bus for DEVICE PE.
+ */
+struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
+{
+	struct pci_bus *bus = NULL;
+	struct eeh_dev *edev;
+	struct pci_dev *pdev;
+
+	if (pe->type & EEH_PE_PHB) {
+		bus = pe->phb->bus;
+	} else if (pe->type & EEH_PE_BUS ||
+		   pe->type & EEH_PE_DEVICE) {
+		if (pe->bus) {
+			bus = pe->bus;
+			goto out;
+		}
+
+		edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
+		pdev = eeh_dev_to_pci_dev(edev);
+		if (pdev)
+			bus = pdev->bus;
+	}
+
+out:
+	return bus;
+}
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
new file mode 100644
index 000000000000..e7ae3484918c
--- /dev/null
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -0,0 +1,74 @@
+/*
+ * Sysfs entries for PCI Error Recovery for PAPR-compliant platform.
+ * Copyright IBM Corporation 2007
+ * Copyright Linas Vepstas <linas@austin.ibm.com> 2007
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
+ */
+#include <linux/pci.h>
+#include <linux/stat.h>
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+
+/**
+ * EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic
+ * @_name: name of file in sysfs directory
+ * @_memb: name of member in struct pci_dn to access
+ * @_format: printf format for display
+ *
+ * All of the attributes look very similar, so just
+ * auto-gen a cut-n-paste routine to display them.
+ */
+#define EEH_SHOW_ATTR(_name,_memb,_format)               \
+static ssize_t eeh_show_##_name(struct device *dev,      \
+		struct device_attribute *attr, char *buf)          \
+{                                                        \
+	struct pci_dev *pdev = to_pci_dev(dev);               \
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);      \
+	                                                      \
+	if (!edev)                                            \
+		return 0;                                     \
+	                                                      \
+	return sprintf(buf, _format "\n", edev->_memb);       \
+}                                                        \
+static DEVICE_ATTR(_name, S_IRUGO, eeh_show_##_name, NULL);
+
+EEH_SHOW_ATTR(eeh_mode,            mode,            "0x%x");
+EEH_SHOW_ATTR(eeh_config_addr,     config_addr,     "0x%x");
+EEH_SHOW_ATTR(eeh_pe_config_addr,  pe_config_addr,  "0x%x");
+
+void eeh_sysfs_add_device(struct pci_dev *pdev)
+{
+	int rc=0;
+
+	rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
+	rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
+	rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+	if (rc)
+		printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+}
+
+void eeh_sysfs_remove_device(struct pci_dev *pdev)
+{
+	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
+	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
+	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+}
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 8741c854e03d..ab15b8d057ad 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -629,21 +629,43 @@ _GLOBAL(ret_from_except_lite)
 
 	CURRENT_THREAD_INFO(r9, r1)
 	ld	r3,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3E
+	ld	r10,PACACURRENT(r13)
+#endif /* CONFIG_PPC_BOOK3E */
 	ld	r4,TI_FLAGS(r9)
 	andi.	r3,r3,MSR_PR
 	beq	resume_kernel
+#ifdef CONFIG_PPC_BOOK3E
+	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
+#endif /* CONFIG_PPC_BOOK3E */
 
 	/* Check current_thread_info()->flags */
 	andi.	r0,r4,_TIF_USER_WORK_MASK
+#ifdef CONFIG_PPC_BOOK3E
+	bne	1f
+	/*
+	 * Check to see if the dbcr0 register is set up to debug.
+	 * Use the internal debug mode bit to do this.
+	 */
+	andis.	r0,r3,DBCR0_IDM@h
 	beq	restore
-
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
+	mfmsr	r0
+	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
+	mtmsr	r0
+	mtspr	SPRN_DBCR0,r3
+	li	r10, -1
+	mtspr	SPRN_DBSR,r10
+	b	restore
+#else
+	beq	restore
+#endif
+1:	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	2f
 	bl	.restore_interrupts
 	SCHEDULE_USER
 	b	.ret_from_except_lite
 
-1:	bl	.save_nvgprs
+2:	bl	.save_nvgprs
 	bl	.restore_interrupts
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_notify_resume
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 40e4a17c8ba0..4e00d223b2e3 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -341,10 +341,17 @@ vsx_unavailable_pSeries_1:
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_pSeries
 
+facility_unavailable_trampoline:
 	. = 0xf60
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	tm_unavailable_pSeries
+	b	facility_unavailable_pSeries
+
+hv_facility_unavailable_trampoline:
+	. = 0xf80
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXGEN)
+	b	facility_unavailable_hv
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
@@ -522,8 +529,10 @@ denorm_done:
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20)
 	STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40)
-	STD_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable)
+	STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60)
+	STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable)
+	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82)
 
 /*
  * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
@@ -793,14 +802,10 @@ system_call_relon_pSeries:
 	STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
 
 	. = 0x4e00
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_data_storage_relon_hv
+	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e20
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	h_instr_storage_relon_hv
+	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e40
 	SET_SCRATCH0(r13)
@@ -808,9 +813,7 @@ system_call_relon_pSeries:
 	b	emulation_assist_relon_hv
 
 	. = 0x4e60
-	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	hmi_exception_relon_hv
+	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e80
 	SET_SCRATCH0(r13)
@@ -835,11 +838,17 @@ vsx_unavailable_relon_pSeries_1:
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_relon_pSeries
 
-tm_unavailable_relon_pSeries_1:
+facility_unavailable_relon_trampoline:
 	. = 0x4f60
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	tm_unavailable_relon_pSeries
+	b	facility_unavailable_relon_pSeries
+
+hv_facility_unavailable_relon_trampoline:
+	. = 0x4f80
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_0(PACA_EXGEN)
+	b	facility_unavailable_relon_hv
 
 	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_PPC_DENORMALISATION
@@ -1165,36 +1174,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	bl	.vsx_unavailable_exception
 	b	.ret_from_except
 
-	.align	7
-	.globl tm_unavailable_common
-tm_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf60, PACA_EXGEN)
-	bl	.save_nvgprs
-	DISABLE_INTS
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.tm_unavailable_exception
-	b	.ret_from_except
+	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
 
 	.align	7
 	.globl	__end_handlers
 __end_handlers:
 
 	/* Equivalents to the above handlers for relocation-on interrupt vectors */
-	STD_RELON_EXCEPTION_HV_OOL(0xe00, h_data_storage)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe00)
-	STD_RELON_EXCEPTION_HV_OOL(0xe20, h_instr_storage)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe20)
 	STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe40)
-	STD_RELON_EXCEPTION_HV_OOL(0xe60, hmi_exception)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe60)
 	MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell)
-	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe80)
 
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
-	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, tm_unavailable)
+	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
+	STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable)
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index a949bdfc9623..f0b47d1a6b0e 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -176,7 +176,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 		length_max = 512 ; /* 64 doublewords */
 		/* DAWR region can't cross 512 boundary */
 		if ((bp->attr.bp_addr >> 10) != 
-		    ((bp->attr.bp_addr + bp->attr.bp_len) >> 10))
+		    ((bp->attr.bp_addr + bp->attr.bp_len - 1) >> 10))
 			return -EINVAL;
 	}
 	if (info->len >
@@ -250,6 +250,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args)
 	 * we still need to single-step the instruction, but we don't
 	 * generate an event.
 	 */
+	info->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
 	if (!((bp->attr.bp_addr <= dar) &&
 	      (dar - bp->attr.bp_addr < bp->attr.bp_len)))
 		info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 8220baa46faf..16a7c2326d48 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -205,7 +205,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches)
 	return ret;
 }
 
-int ibmebus_register_driver(struct of_platform_driver *drv)
+int ibmebus_register_driver(struct platform_driver *drv)
 {
 	/* If the driver uses devices that ibmebus doesn't know, add them */
 	ibmebus_create_devices(drv->driver.of_match_table);
@@ -215,7 +215,7 @@ int ibmebus_register_driver(struct of_platform_driver *drv)
 }
 EXPORT_SYMBOL(ibmebus_register_driver);
 
-void ibmebus_unregister_driver(struct of_platform_driver *drv)
+void ibmebus_unregister_driver(struct platform_driver *drv)
 {
 	driver_unregister(&drv->driver);
 }
@@ -338,11 +338,10 @@ static int ibmebus_bus_bus_match(struct device *dev, struct device_driver *drv)
 static int ibmebus_bus_device_probe(struct device *dev)
 {
 	int error = -ENODEV;
-	struct of_platform_driver *drv;
+	struct platform_driver *drv;
 	struct platform_device *of_dev;
-	const struct of_device_id *match;
 
-	drv = to_of_platform_driver(dev->driver);
+	drv = to_platform_driver(dev->driver);
 	of_dev = to_platform_device(dev);
 
 	if (!drv->probe)
@@ -350,9 +349,8 @@ static int ibmebus_bus_device_probe(struct device *dev)
 
 	of_dev_get(of_dev);
 
-	match = of_match_device(drv->driver.of_match_table, dev);
-	if (match)
-		error = drv->probe(of_dev, match);
+	if (of_driver_match_device(dev, dev->driver))
+		error = drv->probe(of_dev);
 	if (error)
 		of_dev_put(of_dev);
 
@@ -362,7 +360,7 @@ static int ibmebus_bus_device_probe(struct device *dev)
 static int ibmebus_bus_device_remove(struct device *dev)
 {
 	struct platform_device *of_dev = to_platform_device(dev);
-	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+	struct platform_driver *drv = to_platform_driver(dev->driver);
 
 	if (dev->driver && drv->remove)
 		drv->remove(of_dev);
@@ -372,7 +370,7 @@ static int ibmebus_bus_device_remove(struct device *dev)
 static void ibmebus_bus_device_shutdown(struct device *dev)
 {
 	struct platform_device *of_dev = to_platform_device(dev);
-	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+	struct platform_driver *drv = to_platform_driver(dev->driver);
 
 	if (dev->driver && drv->shutdown)
 		drv->shutdown(of_dev);
@@ -419,7 +417,7 @@ struct device_attribute ibmebus_bus_device_attrs[] = {
 static int ibmebus_bus_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct platform_device *of_dev = to_platform_device(dev);
-	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+	struct platform_driver *drv = to_platform_driver(dev->driver);
 	int ret = 0;
 
 	if (dev->driver && drv->suspend)
@@ -430,7 +428,7 @@ static int ibmebus_bus_legacy_suspend(struct device *dev, pm_message_t mesg)
 static int ibmebus_bus_legacy_resume(struct device *dev)
 {
 	struct platform_device *of_dev = to_platform_device(dev);
-	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+	struct platform_driver *drv = to_platform_driver(dev->driver);
 	int ret = 0;
 
 	if (dev->driver && drv->resume)
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 939ea7ef0dc8..d7216c9abda1 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -85,7 +85,7 @@ int powersave_nap;
 /*
  * Register the sysctl to set/clear powersave_nap.
  */
-static ctl_table powersave_nap_ctl_table[]={
+static struct ctl_table powersave_nap_ctl_table[] = {
 	{
 		.procname	= "powersave-nap",
 		.data		= &powersave_nap,
@@ -95,7 +95,7 @@ static ctl_table powersave_nap_ctl_table[]={
 	},
 	{}
 };
-static ctl_table powersave_nap_sysctl_root[] = {
+static struct ctl_table powersave_nap_sysctl_root[] = {
 	{
 		.procname	= "kernel",
 		.mode		= 0555,
diff --git a/arch/powerpc/kernel/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
index 50e90b7e7139..fa0b54b2a362 100644
--- a/arch/powerpc/kernel/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -55,6 +55,7 @@ static struct iowa_bus *iowa_pci_find(unsigned long vaddr, unsigned long paddr)
 
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 {
+	unsigned hugepage_shift;
 	struct iowa_bus *bus;
 	int token;
 
@@ -70,11 +71,17 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 		if (vaddr < PHB_IO_BASE || vaddr >= PHB_IO_END)
 			return NULL;
 
-		ptep = find_linux_pte(init_mm.pgd, vaddr);
+		ptep = find_linux_pte_or_hugepte(init_mm.pgd, vaddr,
+						 &hugepage_shift);
 		if (ptep == NULL)
 			paddr = 0;
-		else
+		else {
+			/*
+			 * we don't have hugepages backing iomem
+			 */
+			WARN_ON(hugepage_shift);
 			paddr = pte_pfn(*ptep) << PAGE_SHIFT;
+		}
 		bus = iowa_pci_find(vaddr, paddr);
 
 		if (bus == NULL)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index c0d0dbddfba1..b20ff173a671 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -36,6 +36,8 @@
 #include <linux/hash.h>
 #include <linux/fault-inject.h>
 #include <linux/pci.h>
+#include <linux/iommu.h>
+#include <linux/sched.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -44,6 +46,7 @@
 #include <asm/kdump.h>
 #include <asm/fadump.h>
 #include <asm/vio.h>
+#include <asm/tce.h>
 
 #define DBG(...)
 
@@ -724,6 +727,13 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
 	if (tbl->it_offset == 0)
 		clear_bit(0, tbl->it_map);
 
+#ifdef CONFIG_IOMMU_API
+	if (tbl->it_group) {
+		iommu_group_put(tbl->it_group);
+		BUG_ON(tbl->it_group);
+	}
+#endif
+
 	/* verify that table contains no entries */
 	if (!bitmap_empty(tbl->it_map, tbl->it_size))
 		pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name);
@@ -860,3 +870,316 @@ void iommu_free_coherent(struct iommu_table *tbl, size_t size,
 		free_pages((unsigned long)vaddr, get_order(size));
 	}
 }
+
+#ifdef CONFIG_IOMMU_API
+/*
+ * SPAPR TCE API
+ */
+static void group_release(void *iommu_data)
+{
+	struct iommu_table *tbl = iommu_data;
+	tbl->it_group = NULL;
+}
+
+void iommu_register_group(struct iommu_table *tbl,
+		int pci_domain_number, unsigned long pe_num)
+{
+	struct iommu_group *grp;
+	char *name;
+
+	grp = iommu_group_alloc();
+	if (IS_ERR(grp)) {
+		pr_warn("powerpc iommu api: cannot create new group, err=%ld\n",
+				PTR_ERR(grp));
+		return;
+	}
+	tbl->it_group = grp;
+	iommu_group_set_iommudata(grp, tbl, group_release);
+	name = kasprintf(GFP_KERNEL, "domain%d-pe%lx",
+			pci_domain_number, pe_num);
+	if (!name)
+		return;
+	iommu_group_set_name(grp, name);
+	kfree(name);
+}
+
+enum dma_data_direction iommu_tce_direction(unsigned long tce)
+{
+	if ((tce & TCE_PCI_READ) && (tce & TCE_PCI_WRITE))
+		return DMA_BIDIRECTIONAL;
+	else if (tce & TCE_PCI_READ)
+		return DMA_TO_DEVICE;
+	else if (tce & TCE_PCI_WRITE)
+		return DMA_FROM_DEVICE;
+	else
+		return DMA_NONE;
+}
+EXPORT_SYMBOL_GPL(iommu_tce_direction);
+
+void iommu_flush_tce(struct iommu_table *tbl)
+{
+	/* Flush/invalidate TLB caches if necessary */
+	if (ppc_md.tce_flush)
+		ppc_md.tce_flush(tbl);
+
+	/* Make sure updates are seen by hardware */
+	mb();
+}
+EXPORT_SYMBOL_GPL(iommu_flush_tce);
+
+int iommu_tce_clear_param_check(struct iommu_table *tbl,
+		unsigned long ioba, unsigned long tce_value,
+		unsigned long npages)
+{
+	/* ppc_md.tce_free() does not support any value but 0 */
+	if (tce_value)
+		return -EINVAL;
+
+	if (ioba & ~IOMMU_PAGE_MASK)
+		return -EINVAL;
+
+	ioba >>= IOMMU_PAGE_SHIFT;
+	if (ioba < tbl->it_offset)
+		return -EINVAL;
+
+	if ((ioba + npages) > (tbl->it_offset + tbl->it_size))
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_tce_clear_param_check);
+
+int iommu_tce_put_param_check(struct iommu_table *tbl,
+		unsigned long ioba, unsigned long tce)
+{
+	if (!(tce & (TCE_PCI_WRITE | TCE_PCI_READ)))
+		return -EINVAL;
+
+	if (tce & ~(IOMMU_PAGE_MASK | TCE_PCI_WRITE | TCE_PCI_READ))
+		return -EINVAL;
+
+	if (ioba & ~IOMMU_PAGE_MASK)
+		return -EINVAL;
+
+	ioba >>= IOMMU_PAGE_SHIFT;
+	if (ioba < tbl->it_offset)
+		return -EINVAL;
+
+	if ((ioba + 1) > (tbl->it_offset + tbl->it_size))
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_tce_put_param_check);
+
+unsigned long iommu_clear_tce(struct iommu_table *tbl, unsigned long entry)
+{
+	unsigned long oldtce;
+	struct iommu_pool *pool = get_pool(tbl, entry);
+
+	spin_lock(&(pool->lock));
+
+	oldtce = ppc_md.tce_get(tbl, entry);
+	if (oldtce & (TCE_PCI_WRITE | TCE_PCI_READ))
+		ppc_md.tce_free(tbl, entry, 1);
+	else
+		oldtce = 0;
+
+	spin_unlock(&(pool->lock));
+
+	return oldtce;
+}
+EXPORT_SYMBOL_GPL(iommu_clear_tce);
+
+int iommu_clear_tces_and_put_pages(struct iommu_table *tbl,
+		unsigned long entry, unsigned long pages)
+{
+	unsigned long oldtce;
+	struct page *page;
+
+	for ( ; pages; --pages, ++entry) {
+		oldtce = iommu_clear_tce(tbl, entry);
+		if (!oldtce)
+			continue;
+
+		page = pfn_to_page(oldtce >> PAGE_SHIFT);
+		WARN_ON(!page);
+		if (page) {
+			if (oldtce & TCE_PCI_WRITE)
+				SetPageDirty(page);
+			put_page(page);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_clear_tces_and_put_pages);
+
+/*
+ * hwaddr is a kernel virtual address here (0xc... bazillion),
+ * tce_build converts it to a physical address.
+ */
+int iommu_tce_build(struct iommu_table *tbl, unsigned long entry,
+		unsigned long hwaddr, enum dma_data_direction direction)
+{
+	int ret = -EBUSY;
+	unsigned long oldtce;
+	struct iommu_pool *pool = get_pool(tbl, entry);
+
+	spin_lock(&(pool->lock));
+
+	oldtce = ppc_md.tce_get(tbl, entry);
+	/* Add new entry if it is not busy */
+	if (!(oldtce & (TCE_PCI_WRITE | TCE_PCI_READ)))
+		ret = ppc_md.tce_build(tbl, entry, 1, hwaddr, direction, NULL);
+
+	spin_unlock(&(pool->lock));
+
+	/* if (unlikely(ret))
+		pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n",
+				__func__, hwaddr, entry << IOMMU_PAGE_SHIFT,
+				hwaddr, ret); */
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iommu_tce_build);
+
+int iommu_put_tce_user_mode(struct iommu_table *tbl, unsigned long entry,
+		unsigned long tce)
+{
+	int ret;
+	struct page *page = NULL;
+	unsigned long hwaddr, offset = tce & IOMMU_PAGE_MASK & ~PAGE_MASK;
+	enum dma_data_direction direction = iommu_tce_direction(tce);
+
+	ret = get_user_pages_fast(tce & PAGE_MASK, 1,
+			direction != DMA_TO_DEVICE, &page);
+	if (unlikely(ret != 1)) {
+		/* pr_err("iommu_tce: get_user_pages_fast failed tce=%lx ioba=%lx ret=%d\n",
+				tce, entry << IOMMU_PAGE_SHIFT, ret); */
+		return -EFAULT;
+	}
+	hwaddr = (unsigned long) page_address(page) + offset;
+
+	ret = iommu_tce_build(tbl, entry, hwaddr, direction);
+	if (ret)
+		put_page(page);
+
+	if (ret < 0)
+		pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%d\n",
+				__func__, entry << IOMMU_PAGE_SHIFT, tce, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iommu_put_tce_user_mode);
+
+int iommu_take_ownership(struct iommu_table *tbl)
+{
+	unsigned long sz = (tbl->it_size + 7) >> 3;
+
+	if (tbl->it_offset == 0)
+		clear_bit(0, tbl->it_map);
+
+	if (!bitmap_empty(tbl->it_map, tbl->it_size)) {
+		pr_err("iommu_tce: it_map is not empty");
+		return -EBUSY;
+	}
+
+	memset(tbl->it_map, 0xff, sz);
+	iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_take_ownership);
+
+void iommu_release_ownership(struct iommu_table *tbl)
+{
+	unsigned long sz = (tbl->it_size + 7) >> 3;
+
+	iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size);
+	memset(tbl->it_map, 0, sz);
+
+	/* Restore bit#0 set by iommu_init_table() */
+	if (tbl->it_offset == 0)
+		set_bit(0, tbl->it_map);
+}
+EXPORT_SYMBOL_GPL(iommu_release_ownership);
+
+static int iommu_add_device(struct device *dev)
+{
+	struct iommu_table *tbl;
+	int ret = 0;
+
+	if (WARN_ON(dev->iommu_group)) {
+		pr_warn("iommu_tce: device %s is already in iommu group %d, skipping\n",
+				dev_name(dev),
+				iommu_group_id(dev->iommu_group));
+		return -EBUSY;
+	}
+
+	tbl = get_iommu_table_base(dev);
+	if (!tbl || !tbl->it_group) {
+		pr_debug("iommu_tce: skipping device %s with no tbl\n",
+				dev_name(dev));
+		return 0;
+	}
+
+	pr_debug("iommu_tce: adding %s to iommu group %d\n",
+			dev_name(dev), iommu_group_id(tbl->it_group));
+
+	ret = iommu_group_add_device(tbl->it_group, dev);
+	if (ret < 0)
+		pr_err("iommu_tce: %s has not been added, ret=%d\n",
+				dev_name(dev), ret);
+
+	return ret;
+}
+
+static void iommu_del_device(struct device *dev)
+{
+	iommu_group_remove_device(dev);
+}
+
+static int iommu_bus_notifier(struct notifier_block *nb,
+			      unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		return iommu_add_device(dev);
+	case BUS_NOTIFY_DEL_DEVICE:
+		iommu_del_device(dev);
+		return 0;
+	default:
+		return 0;
+	}
+}
+
+static struct notifier_block tce_iommu_bus_nb = {
+	.notifier_call = iommu_bus_notifier,
+};
+
+static int __init tce_iommu_init(void)
+{
+	struct pci_dev *pdev = NULL;
+
+	BUILD_BUG_ON(PAGE_SIZE < IOMMU_PAGE_SIZE);
+
+	for_each_pci_dev(pdev)
+		iommu_add_device(&pdev->dev);
+
+	bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
+	return 0;
+}
+
+subsys_initcall_sync(tce_iommu_init);
+
+#else
+
+void iommu_register_group(struct iommu_table *tbl,
+		int pci_domain_number, unsigned long pe_num)
+{
+}
+
+#endif /* CONFIG_IOMMU_API */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index ea185e0b3cae..2e51cde616d2 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -116,8 +116,6 @@ static inline notrace int decrementer_check_overflow(void)
  	u64 now = get_tb_or_rtc();
  	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
  
-	if (now >= *next_tb)
-		set_dec(1);
 	return now >= *next_tb;
 }
 
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 11f5b03a0b06..2156ea90eb54 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -36,12 +36,6 @@
 #include <asm/sstep.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-#define MSR_SINGLESTEP	(MSR_DE)
-#else
-#define MSR_SINGLESTEP	(MSR_SE)
-#endif
-
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
@@ -104,19 +98,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	/* We turn off async exceptions to ensure that the single step will
-	 * be for the instruction we have the kprobe on, if we dont its
-	 * possible we'd get the single step reported for an exception handler
-	 * like Decrementer or External Interrupt */
-	regs->msr &= ~MSR_EE;
-	regs->msr |= MSR_SINGLESTEP;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	regs->msr &= ~MSR_CE;
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
-#ifdef CONFIG_PPC_47x
-	isync();
-#endif
-#endif
+	enable_single_step(regs);
 
 	/*
 	 * On powerpc we should single step on the original
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 6782221d49bd..db28032e320e 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -750,13 +750,8 @@ EXPORT_SYMBOL_GPL(kvm_hypercall);
 
 static __init void kvm_free_tmp(void)
 {
-	unsigned long start, end;
-
-	start = (ulong)&kvm_tmp[kvm_tmp_index + (PAGE_SIZE - 1)] & PAGE_MASK;
-	end = (ulong)&kvm_tmp[ARRAY_SIZE(kvm_tmp)] & PAGE_MASK;
-
-	/* Free the tmp space we don't need */
-	free_reserved_area(start, end, 0, NULL);
+	free_reserved_area(&kvm_tmp[kvm_tmp_index],
+			   &kvm_tmp[ARRAY_SIZE(kvm_tmp)], -1, NULL);
 }
 
 static int __init kvm_guest_init(void)
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 48fbc2b97e95..8213ee1eb05a 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -84,22 +84,30 @@ static ssize_t dev_nvram_read(struct file *file, char __user *buf,
 	char *tmp = NULL;
 	ssize_t size;
 
-	ret = -ENODEV;
-	if (!ppc_md.nvram_size)
+	if (!ppc_md.nvram_size) {
+		ret = -ENODEV;
 		goto out;
+	}
 
-	ret = 0;
 	size = ppc_md.nvram_size();
-	if (*ppos >= size || size < 0)
+	if (size < 0) {
+		ret = size;
+		goto out;
+	}
+
+	if (*ppos >= size) {
+		ret = 0;
 		goto out;
+	}
 
 	count = min_t(size_t, count, size - *ppos);
 	count = min(count, PAGE_SIZE);
 
-	ret = -ENOMEM;
 	tmp = kmalloc(count, GFP_KERNEL);
-	if (!tmp)
+	if (!tmp) {
+		ret = -ENOMEM;
 		goto out;
+	}
 
 	ret = ppc_md.nvram_read(tmp, count, ppos);
 	if (ret <= 0)
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
new file mode 100644
index 000000000000..3f608800c06b
--- /dev/null
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -0,0 +1,111 @@
+/*
+ * Derived from "arch/powerpc/platforms/pseries/pci_dlpar.c"
+ *
+ * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
+ * Copyright (C) 2005 International Business Machines
+ *
+ * Updates, 2005, John Rose <johnrose@austin.ibm.com>
+ * Updates, 2005, Linas Vepstas <linas@austin.ibm.com>
+ * Updates, 2013, Gavin Shan <shangw@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/export.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <asm/firmware.h>
+#include <asm/eeh.h>
+
+/**
+ * __pcibios_remove_pci_devices - remove all devices under this bus
+ * @bus: the indicated PCI bus
+ * @purge_pe: destroy the PE on removal of PCI devices
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ * By default, the corresponding PE will be destroied during the
+ * normal PCI hotplug path. For PCI hotplug during EEH recovery,
+ * the corresponding PE won't be destroied and deallocated.
+ */
+void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+{
+	struct pci_dev *dev, *tmp;
+	struct pci_bus *child_bus;
+
+	/* First go down child busses */
+	list_for_each_entry(child_bus, &bus->children, node)
+		__pcibios_remove_pci_devices(child_bus, purge_pe);
+
+	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
+		 pci_domain_nr(bus),  bus->number);
+	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+		pr_debug("     * Removing %s...\n", pci_name(dev));
+		eeh_remove_bus_device(dev, purge_pe);
+		pci_stop_and_remove_bus_device(dev);
+	}
+}
+
+/**
+ * pcibios_remove_pci_devices - remove all devices under this bus
+ * @bus: the indicated PCI bus
+ *
+ * Remove all of the PCI devices under this bus both from the
+ * linux pci device tree, and from the powerpc EEH address cache.
+ */
+void pcibios_remove_pci_devices(struct pci_bus *bus)
+{
+	__pcibios_remove_pci_devices(bus, 1);
+}
+EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
+
+/**
+ * pcibios_add_pci_devices - adds new pci devices to bus
+ * @bus: the indicated PCI bus
+ *
+ * This routine will find and fixup new pci devices under
+ * the indicated bus. This routine presumes that there
+ * might already be some devices under this bridge, so
+ * it carefully tries to add only new devices.  (And that
+ * is how this routine differs from other, similar pcibios
+ * routines.)
+ */
+void pcibios_add_pci_devices(struct pci_bus * bus)
+{
+	int slotno, num, mode, pass, max;
+	struct pci_dev *dev;
+	struct device_node *dn = pci_bus_to_OF_node(bus);
+
+	eeh_add_device_tree_early(dn);
+
+	mode = PCI_PROBE_NORMAL;
+	if (ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+
+	if (mode == PCI_PROBE_DEVTREE) {
+		/* use ofdt-based probe */
+		of_rescan_bus(dn, bus);
+	} else if (mode == PCI_PROBE_NORMAL) {
+		/* use legacy probe */
+		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+		if (!num)
+			return;
+		pcibios_setup_bus_devices(bus);
+		max = bus->busn_res.start;
+		for (pass = 0; pass < 2; pass++) {
+			list_for_each_entry(dev, &bus->devices, bus_list) {
+				if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+				    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+					max = pci_scan_bridge(bus, dev,
+							      max, pass);
+			}
+		}
+	}
+	pcibios_finish_adding_to_bus(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2a67e9baa59f..6b0ba5854d99 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -128,7 +128,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	const char *type;
 	struct pci_slot *slot;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 	type = of_get_property(node, "device_type", NULL);
@@ -137,7 +137,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
 
-	dev->bus = bus;
 	dev->dev.of_node = of_node_get(node);
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
@@ -165,7 +164,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	pr_debug("    class: 0x%x\n", dev->class);
 	pr_debug("    revision: 0x%x\n", dev->revision);
 
-	dev->current_state = 4;		/* unknown power state */
+	dev->current_state = PCI_UNKNOWN;	/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 	dev->dma_mask = 0xffffffff;
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 076d1242507a..c517dbe705fd 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -916,7 +916,11 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	flush_altivec_to_thread(src);
 	flush_vsx_to_thread(src);
 	flush_spe_to_thread(src);
+
 	*dst = *src;
+
+	clear_task_ebb(dst);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 8b6f7a99cce2..eb23ac92abb9 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -559,6 +559,35 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
 }
 #endif
 
+static void __init early_reserve_mem_dt(void)
+{
+	unsigned long i, len, dt_root;
+	const __be32 *prop;
+
+	dt_root = of_get_flat_dt_root();
+
+	prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
+
+	if (!prop)
+		return;
+
+	DBG("Found new-style reserved-ranges\n");
+
+	/* Each reserved range is an (address,size) pair, 2 cells each,
+	 * totalling 4 cells per range. */
+	for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
+		u64 base, size;
+
+		base = of_read_number(prop + (i * 4) + 0, 2);
+		size = of_read_number(prop + (i * 4) + 2, 2);
+
+		if (size) {
+			DBG("reserving: %llx -> %llx\n", base, size);
+			memblock_reserve(base, size);
+		}
+	}
+}
+
 static void __init early_reserve_mem(void)
 {
 	u64 base, size;
@@ -574,12 +603,16 @@ static void __init early_reserve_mem(void)
 	self_size = initial_boot_params->totalsize;
 	memblock_reserve(self_base, self_size);
 
+	/* Look for the new "reserved-regions" property in the DT */
+	early_reserve_mem_dt();
+
 #ifdef CONFIG_BLK_DEV_INITRD
-	/* then reserve the initrd, if any */
-	if (initrd_start && (initrd_end > initrd_start))
+	/* Then reserve the initrd, if any */
+	if (initrd_start && (initrd_end > initrd_start)) {
 		memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
 			_ALIGN_UP(initrd_end, PAGE_SIZE) -
 			_ALIGN_DOWN(initrd_start, PAGE_SIZE));
+	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -591,6 +624,8 @@ static void __init early_reserve_mem(void)
 		u32 base_32, size_32;
 		u32 *reserve_map_32 = (u32 *)reserve_map;
 
+		DBG("Found old 32-bit reserve map\n");
+
 		while (1) {
 			base_32 = *(reserve_map_32++);
 			size_32 = *(reserve_map_32++);
@@ -605,6 +640,9 @@ static void __init early_reserve_mem(void)
 		return;
 	}
 #endif
+	DBG("Processing reserve map\n");
+
+	/* Handle the reserve map in the fdt blob if it exists */
 	while (1) {
 		base = *(reserve_map++);
 		size = *(reserve_map++);
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 98c2fc198712..9a0d24c390a3 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -975,16 +975,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
 	hw_brk.len = 8;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(task) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(hw_brk.type & HW_BRK_TYPE_RDWR)) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
-		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -997,11 +993,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 		ret =  modify_user_hw_breakpoint(bp, &attr);
 		if (ret) {
-			ptrace_put_breakpoints(task);
 			return ret;
 		}
 		thread->ptrace_bps[0] = bp;
-		ptrace_put_breakpoints(task);
 		thread->hw_brk = hw_brk;
 		return 0;
 	}
@@ -1016,12 +1010,9 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					       ptrace_triggered, NULL, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(task);
-
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 	task->thread.hw_brk = hw_brk;
 #else /* CONFIG_PPC_ADV_DEBUG_REGS */
@@ -1440,24 +1431,19 @@ static long ppc_set_hwdebug(struct task_struct *child,
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
 		brk.type |= HW_BRK_TYPE_WRITE;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	/*
 	 * Check if the request is for 'range' breakpoints. We can
 	 * support it if range < 8 bytes.
 	 */
-	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
+	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
 		len = bp_info->addr2 - bp_info->addr;
-	} else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
-		ptrace_put_breakpoints(child);
+	else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+		len = 1;
+	else
 		return -EINVAL;
-	}
 	bp = thread->ptrace_bps[0];
-	if (bp) {
-		ptrace_put_breakpoints(child);
+	if (bp)
 		return -ENOSPC;
-	}
 
 	/* Create a new breakpoint request if one doesn't exist already */
 	hw_breakpoint_init(&attr);
@@ -1469,11 +1455,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
 					       ptrace_triggered, NULL, child);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
-		ptrace_put_breakpoints(child);
 		return PTR_ERR(bp);
 	}
 
-	ptrace_put_breakpoints(child);
 	return 1;
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
@@ -1517,16 +1501,12 @@ static long ppc_del_hwdebug(struct task_struct *child, long data)
 		return -EINVAL;
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-	if (ptrace_get_breakpoints(child) < 0)
-		return -ESRCH;
-
 	bp = thread->ptrace_bps[0];
 	if (bp) {
 		unregister_hw_breakpoint(bp);
 		thread->ptrace_bps[0] = NULL;
 	} else
 		ret = -ENOENT;
-	ptrace_put_breakpoints(child);
 	return ret;
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
 	if (child->thread.hw_brk.address == 0)
diff --git a/arch/powerpc/kernel/reloc_32.S b/arch/powerpc/kernel/reloc_32.S
index ef46ba6e094f..f366fedb0872 100644
--- a/arch/powerpc/kernel/reloc_32.S
+++ b/arch/powerpc/kernel/reloc_32.S
@@ -166,7 +166,7 @@ ha16:
 	/* R_PPC_ADDR16_LO */
 lo16:
 	cmpwi	r4, R_PPC_ADDR16_LO
-	bne	nxtrela
+	bne	unknown_type
 	lwz	r4, 0(r9)	/* r_offset */
 	lwz	r0, 8(r9)	/* r_addend */
 	add	r0, r0, r3
@@ -191,6 +191,7 @@ nxtrela:
 	dcbst	r4,r7
 	sync			/* Ensure the data is flushed before icbi */
 	icbi	r4,r7
+unknown_type:
 	cmpwi	r8, 0		/* relasz = 0 ? */
 	ble	done
 	add	r9, r9, r6	/* move to next entry in the .rela table */
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 52add6f3e201..80b5ef403f68 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -1172,7 +1172,7 @@ int __init early_init_dt_scan_rtas(unsigned long node,
 static arch_spinlock_t timebase_lock;
 static u64 timebase = 0;
 
-void __cpuinit rtas_give_timebase(void)
+void rtas_give_timebase(void)
 {
 	unsigned long flags;
 
@@ -1189,7 +1189,7 @@ void __cpuinit rtas_give_timebase(void)
 	local_irq_restore(flags);
 }
 
-void __cpuinit rtas_take_timebase(void)
+void rtas_take_timebase(void)
 {
 	while (!timebase)
 		barrier();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 8a022f5de0ef..fe6a58c9f0b7 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -76,7 +76,7 @@
 #endif
 
 int boot_cpuid = 0;
-int __initdata spinning_secondaries;
+int spinning_secondaries;
 u64 ppc64_pft_size;
 
 /* Pick defaults since we might want to patch instructions
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 201385c3a1ae..0f83122e6676 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -407,7 +407,8 @@ inline unsigned long copy_transact_fpr_from_user(struct task_struct *task,
  * altivec/spe instructions at some point.
  */
 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
-		int sigret, int ctx_has_vsx_region)
+			  struct mcontext __user *tm_frame, int sigret,
+			  int ctx_has_vsx_region)
 {
 	unsigned long msr = regs->msr;
 
@@ -475,6 +476,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 
 	if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
 		return 1;
+	/* We need to write 0 the MSR top 32 bits in the tm frame so that we
+	 * can check it on the restore to see if TM is active
+	 */
+	if (tm_frame && __put_user(0, &tm_frame->mc_gregs[PT_MSR]))
+		return 1;
+
 	if (sigret) {
 		/* Set up the sigreturn trampoline: li r0,sigret; sc */
 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
@@ -747,7 +754,7 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 				 struct mcontext __user *tm_sr)
 {
 	long err;
-	unsigned long msr;
+	unsigned long msr, msr_hi;
 #ifdef CONFIG_VSX
 	int i;
 #endif
@@ -852,8 +859,11 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	tm_enable();
 	/* This loads the checkpointed FP/VEC state, if used */
 	tm_recheckpoint(&current->thread, msr);
-	/* The task has moved into TM state S, so ensure MSR reflects this */
-	regs->msr = (regs->msr & ~MSR_TS_MASK) | MSR_TS_S;
+	/* Get the top half of the MSR */
+	if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
+		return 1;
+	/* Pull in MSR TM from user context */
+	regs->msr = (regs->msr & ~MSR_TS_MASK) | ((msr_hi<<32) & MSR_TS_MASK);
 
 	/* This loads the speculative FP/VEC state, if used */
 	if (msr & MSR_FP) {
@@ -952,6 +962,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 {
 	struct rt_sigframe __user *rt_sf;
 	struct mcontext __user *frame;
+	struct mcontext __user *tm_frame = NULL;
 	void __user *addr;
 	unsigned long newsp = 0;
 	int sigret;
@@ -985,23 +996,24 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 	}
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	tm_frame = &rt_sf->uc_transact.uc_mcontext;
 	if (MSR_TM_ACTIVE(regs->msr)) {
-		if (save_tm_user_regs(regs, &rt_sf->uc.uc_mcontext,
-				      &rt_sf->uc_transact.uc_mcontext, sigret))
+		if (save_tm_user_regs(regs, frame, tm_frame, sigret))
 			goto badframe;
 	}
 	else
 #endif
-		if (save_user_regs(regs, frame, sigret, 1))
+	{
+		if (save_user_regs(regs, frame, tm_frame, sigret, 1))
 			goto badframe;
+	}
 	regs->link = tramp;
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	if (MSR_TM_ACTIVE(regs->msr)) {
 		if (__put_user((unsigned long)&rt_sf->uc_transact,
 			       &rt_sf->uc.uc_link)
-		    || __put_user(to_user_ptr(&rt_sf->uc_transact.uc_mcontext),
-				  &rt_sf->uc_transact.uc_regs))
+		    || __put_user((unsigned long)tm_frame, &rt_sf->uc_transact.uc_regs))
 			goto badframe;
 	}
 	else
@@ -1170,7 +1182,7 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
 		mctx = (struct mcontext __user *)
 			((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
 		if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
-		    || save_user_regs(regs, mctx, 0, ctx_has_vsx_region)
+		    || save_user_regs(regs, mctx, NULL, 0, ctx_has_vsx_region)
 		    || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
 		    || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
 			return -EFAULT;
@@ -1233,7 +1245,7 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 		if (__get_user(msr_hi, &mcp->mc_gregs[PT_MSR]))
 			goto bad;
 
-		if (MSR_TM_SUSPENDED(msr_hi<<32)) {
+		if (MSR_TM_ACTIVE(msr_hi<<32)) {
 			/* We only recheckpoint on return if we're
 			 * transaction.
 			 */
@@ -1392,6 +1404,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 {
 	struct sigcontext __user *sc;
 	struct sigframe __user *frame;
+	struct mcontext __user *tm_mctx = NULL;
 	unsigned long newsp = 0;
 	int sigret;
 	unsigned long tramp;
@@ -1425,6 +1438,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 	}
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	tm_mctx = &frame->mctx_transact;
 	if (MSR_TM_ACTIVE(regs->msr)) {
 		if (save_tm_user_regs(regs, &frame->mctx, &frame->mctx_transact,
 				      sigret))
@@ -1432,8 +1446,10 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 	}
 	else
 #endif
-		if (save_user_regs(regs, &frame->mctx, sigret, 1))
+	{
+		if (save_user_regs(regs, &frame->mctx, tm_mctx, sigret, 1))
 			goto badframe;
+	}
 
 	regs->link = tramp;
 
@@ -1481,16 +1497,22 @@ badframe:
 long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 		       struct pt_regs *regs)
 {
+	struct sigframe __user *sf;
 	struct sigcontext __user *sc;
 	struct sigcontext sigctx;
 	struct mcontext __user *sr;
 	void __user *addr;
 	sigset_t set;
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	struct mcontext __user *mcp, *tm_mcp;
+	unsigned long msr_hi;
+#endif
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
+	sf = (struct sigframe __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
+	sc = &sf->sctx;
 	addr = sc;
 	if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
 		goto badframe;
@@ -1507,11 +1529,25 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 #endif
 	set_current_blocked(&set);
 
-	sr = (struct mcontext __user *)from_user_ptr(sigctx.regs);
-	addr = sr;
-	if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
-	    || restore_user_regs(regs, sr, 1))
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	mcp = (struct mcontext __user *)&sf->mctx;
+	tm_mcp = (struct mcontext __user *)&sf->mctx_transact;
+	if (__get_user(msr_hi, &tm_mcp->mc_gregs[PT_MSR]))
 		goto badframe;
+	if (MSR_TM_ACTIVE(msr_hi<<32)) {
+		if (!cpu_has_feature(CPU_FTR_TM))
+			goto badframe;
+		if (restore_tm_user_regs(regs, mcp, tm_mcp))
+			goto badframe;
+	} else
+#endif
+	{
+		sr = (struct mcontext __user *)from_user_ptr(sigctx.regs);
+		addr = sr;
+		if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
+		    || restore_user_regs(regs, sr, 1))
+			goto badframe;
+	}
 
 	set_thread_flag(TIF_RESTOREALL);
 	return 0;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 345947367ec0..887e99d85bc2 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -410,6 +410,10 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+	/* pull in MSR TM from user context */
+	regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
+
+	/* pull in MSR LE from user context */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
 	/* The following non-GPR non-FPR non-VR state is also checkpointed: */
@@ -505,8 +509,6 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 	tm_enable();
 	/* This loads the checkpointed FP/VEC state, if used */
 	tm_recheckpoint(&current->thread, msr);
-	/* The task has moved into TM state S, so ensure MSR reflects this: */
-	regs->msr = (regs->msr & ~MSR_TS_MASK) | __MASK(33);
 
 	/* This loads the speculative FP/VEC state, if used */
 	if (msr & MSR_FP) {
@@ -654,7 +656,7 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5,
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR]))
 		goto badframe;
-	if (MSR_TM_SUSPENDED(msr)) {
+	if (MSR_TM_ACTIVE(msr)) {
 		/* We recheckpoint on return. */
 		struct ucontext __user *uc_transact;
 		if (__get_user(uc_transact, &uc->uc_link))
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ee7ac5e6e28a..38b0ba65a735 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -480,7 +480,7 @@ static void cpu_idle_thread_init(unsigned int cpu, struct task_struct *idle)
 	secondary_ti = current_set[cpu] = ti;
 }
 
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle)
+int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	int rc, c;
 
@@ -610,7 +610,7 @@ static struct device_node *cpu_to_l2cache(int cpu)
 }
 
 /* Activate a secondary processor. */
-__cpuinit void start_secondary(void *unused)
+void start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
 	struct device_node *l2_cache;
@@ -637,12 +637,10 @@ __cpuinit void start_secondary(void *unused)
 
 	vdso_getcpu_init();
 #endif
-	notify_cpu_starting(cpu);
-	set_cpu_online(cpu, true);
 	/* Update sibling maps */
 	base = cpu_first_thread_sibling(cpu);
 	for (i = 0; i < threads_per_core; i++) {
-		if (cpu_is_offline(base + i))
+		if (cpu_is_offline(base + i) && (cpu != base + i))
 			continue;
 		cpumask_set_cpu(cpu, cpu_sibling_mask(base + i));
 		cpumask_set_cpu(base + i, cpu_sibling_mask(cpu));
@@ -667,6 +665,10 @@ __cpuinit void start_secondary(void *unused)
 	}
 	of_node_put(l2_cache);
 
+	smp_wmb();
+	notify_cpu_starting(cpu);
+	set_cpu_online(cpu, true);
+
 	local_irq_enable();
 
 	cpu_startup_entry(CPUHP_ONLINE);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index e68a84568b8b..27a90b99ef67 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -341,7 +341,7 @@ static struct device_attribute pa6t_attrs[] = {
 #endif /* HAS_PPC_PMC_PA6T */
 #endif /* HAS_PPC_PMC_CLASSIC */
 
-static void __cpuinit register_cpu_online(unsigned int cpu)
+static void register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct device *s = &c->dev;
@@ -502,7 +502,7 @@ ssize_t arch_cpu_release(const char *buf, size_t count)
 
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
+static int sysfs_cpu_notify(struct notifier_block *self,
 				      unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
@@ -522,7 +522,7 @@ static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata sysfs_cpu_nb = {
+static struct notifier_block sysfs_cpu_nb = {
 	.notifier_call	= sysfs_cpu_notify,
 };
 
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 5fc29ad7e26f..65ab9e909377 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -631,7 +631,6 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
 	return found;
 }
 
-/* should become __cpuinit when secondary_cpu_time_init also is */
 void start_cpu_decrementer(void)
 {
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 2da67e7a16d5..51be8fb24803 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -112,9 +112,18 @@ _GLOBAL(tm_reclaim)
 	std	r3, STACK_PARAM(0)(r1)
 	SAVE_NVGPRS(r1)
 
+	/* We need to setup MSR for VSX register save instructions.  Here we
+	 * also clear the MSR RI since when we do the treclaim, we won't have a
+	 * valid kernel pointer for a while.  We clear RI here as it avoids
+	 * adding another mtmsr closer to the treclaim.  This makes the region
+	 * maked as non-recoverable wider than it needs to be but it saves on
+	 * inserting another mtmsrd later.
+	 */
 	mfmsr	r14
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
+	li	r16, MSR_RI
+	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
 #ifdef CONFIG_VSX
 	BEGIN_FTR_SECTION
@@ -349,9 +358,10 @@ restore_gprs:
 	mtcr	r5
 	mtxer	r6
 
-	/* MSR and flags:  We don't change CRs, and we don't need to alter
-	 * MSR.
+	/* Clear the MSR RI since we are about to change R1.  EE is already off
 	 */
+	li	r4, 0
+	mtmsrd	r4, 1
 
 	REST_4GPRS(0, r7)			/* GPR0-3 */
 	REST_GPR(4, r7)				/* GPR4-6 */
@@ -377,6 +387,10 @@ restore_gprs:
 	GET_PACA(r13)
 	GET_SCRATCH0(r1)
 
+	/* R1 is restored, so we are recoverable again.  EE is still off */
+	li	r4, MSR_RI
+	mtmsrd	r4, 1
+
 	REST_NVGPRS(r1)
 
 	addi    r1, r1, TM_FRAME_SIZE
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index c0e5caf8ccc7..bf33c22e38a4 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -866,6 +866,10 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword)
 		u8 val;
 		u32 shift = 8 * (3 - (pos & 0x3));
 
+		/* if process is 32-bit, clear upper 32 bits of EA */
+		if ((regs->msr & MSR_64BIT) == 0)
+			EA &= 0xFFFFFFFF;
+
 		switch ((instword & PPC_INST_STRING_MASK)) {
 			case PPC_INST_LSWX:
 			case PPC_INST_LSWI:
@@ -1125,7 +1129,17 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 	 * ESR_DST (!?) or 0.  In the process of chasing this with the
 	 * hardware people - not sure if it can happen on any illegal
 	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurrences etc. -dgibson 31/Mar/2003 */
+	 * pattern to occurrences etc. -dgibson 31/Mar/2003
+	 */
+
+	/*
+	 * If we support a HW FPU, we need to ensure the FP state
+	 * if flushed into the thread_struct before attempting
+	 * emulation
+	 */
+#ifdef CONFIG_PPC_FPU
+	flush_fp_to_thread(current);
+#endif
 	switch (do_mathemu(regs)) {
 	case 0:
 		emulate_single_step(regs);
@@ -1282,25 +1296,50 @@ void vsx_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
 }
 
-void tm_unavailable_exception(struct pt_regs *regs)
+void facility_unavailable_exception(struct pt_regs *regs)
 {
+	static char *facility_strings[] = {
+		"FPU",
+		"VMX/VSX",
+		"DSCR",
+		"PMU SPRs",
+		"BHRB",
+		"TM",
+		"AT",
+		"EBB",
+		"TAR",
+	};
+	char *facility, *prefix;
+	u64 value;
+
+	if (regs->trap == 0xf60) {
+		value = mfspr(SPRN_FSCR);
+		prefix = "";
+	} else {
+		value = mfspr(SPRN_HFSCR);
+		prefix = "Hypervisor ";
+	}
+
+	value = value >> 56;
+
 	/* We restore the interrupt state now */
 	if (!arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
-	/* Currently we never expect a TMU exception.  Catch
-	 * this and kill the process!
-	 */
-	printk(KERN_EMERG "Unexpected TM unavailable exception at %lx "
-	       "(msr %lx)\n",
-	       regs->nip, regs->msr);
+	if (value < ARRAY_SIZE(facility_strings))
+		facility = facility_strings[value];
+	else
+		facility = "unknown";
+
+	pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
+		prefix, facility, regs->nip, regs->msr);
 
 	if (user_mode(regs)) {
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 		return;
 	}
 
-	die("Unexpected TM unavailable exception", regs, SIGABRT);
+	die("Unexpected facility unavailable exception", regs, SIGABRT);
 }
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -1396,8 +1435,7 @@ void performance_monitor_exception(struct pt_regs *regs)
 void SoftwareEmulation(struct pt_regs *regs)
 {
 	extern int do_mathemu(struct pt_regs *);
-	extern int Soft_emulate_8xx(struct pt_regs *);
-#if defined(CONFIG_MATH_EMULATION) || defined(CONFIG_8XX_MINIMAL_FPEMU)
+#if defined(CONFIG_MATH_EMULATION)
 	int errcode;
 #endif
 
@@ -1430,23 +1468,6 @@ void SoftwareEmulation(struct pt_regs *regs)
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 		return;
 	}
-
-#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
-	errcode = Soft_emulate_8xx(regs);
-	if (errcode >= 0)
-		PPC_WARN_EMULATED(8xx, regs);
-
-	switch (errcode) {
-	case 0:
-		emulate_single_step(regs);
-		return;
-	case 1:
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	case -EFAULT:
-		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-		return;
-	}
 #else
 	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 #endif
@@ -1796,8 +1817,6 @@ struct ppc_emulated ppc_emulated = {
 	WARN_EMULATED_SETUP(unaligned),
 #ifdef CONFIG_MATH_EMULATION
 	WARN_EMULATED_SETUP(math),
-#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
-	WARN_EMULATED_SETUP(8xx),
 #endif
 #ifdef CONFIG_VSX
 	WARN_EMULATED_SETUP(vsx),
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 9d3fdcd66290..a15837519dca 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -50,7 +50,7 @@ void __init udbg_early_init(void)
 	udbg_init_debug_beat();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE)
 	udbg_init_pas_realmode();
-#elif defined(CONFIG_BOOTX_TEXT)
+#elif defined(CONFIG_PPC_EARLY_DEBUG_BOOTX)
 	udbg_init_btext();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
 	/* PPC44x debug */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d4f463ac65b1..1d9c92621b36 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -711,7 +711,7 @@ static void __init vdso_setup_syscall_map(void)
 }
 
 #ifdef CONFIG_PPC64
-int __cpuinit vdso_getcpu_init(void)
+int vdso_getcpu_init(void)
 {
 	unsigned long cpu, node, val;