powerpc/perf: Move perf core & PMU code into a subdirectory

The perf code has grown a lot since it started, and is big enough to
warrant its own subdirectory. For reference it's ~60% bigger than the
oprofile code. It declutters the kernel directory, makes it simpler to
grep for "just perf stuff", and allows us to shorten some filenames.

While we're at it, make it more obvious that we have two implementations
of the core perf logic. One for (roughly) Book3S CPUs, which was the
original implementation, and the other for Freescale embedded CPUs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/powerpc/perf/e500-pmu.c b/arch/powerpc/perf/e500-pmu.c
new file mode 100644
index 000000000000..cb2e2949c8d1
--- /dev/null
+++ b/arch/powerpc/perf/e500-pmu.c
@@ -0,0 +1,134 @@
+/*
+ * Performance counter support for e500 family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	/*
+	 * D-cache misses are not split into read/write/prefetch;
+	 * use raw event 41.
+	 */
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	27,		0	},
+		[C(OP_WRITE)] = {	28,		0	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	2,		60	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It allocates only on L1 castout or explicit prefetch, and
+	 * does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	12,		15 	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(NODE)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	-1,		-1 	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 128;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	u64 ret;
+
+	if (event_low >= num_events)
+		return 0;
+
+	ret = FSL_EMB_EVENT_VALID;
+
+	if (event_low >= 76 && event_low <= 81) {
+		ret |= FSL_EMB_EVENT_RESTRICTED;
+		ret |= event_id &
+		       (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH);
+	} else if (event_id &
+	           (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) {
+		/* Threshold requested on non-threshold event */
+		return 0;
+	}
+
+	return ret;
+}
+
+static struct fsl_emb_pmu e500_pmu = {
+	.name			= "e500 family",
+	.n_counter		= 4,
+	.n_restricted		= 2,
+	.xlate_event		= e500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e500_generic_events),
+	.generic_events		= e500_generic_events,
+	.cache_events		= &e500_cache_events,
+};
+
+static int init_e500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type)
+		return -ENODEV;
+
+	if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc"))
+		num_events = 256;
+	else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e500_pmu);
+}
+
+early_initcall(init_e500_pmu);