powerpc/47x: allow kernel to be loaded in higher physical memory

The 44x code (which is shared by 47x) assumes the available physical memory
begins at 0x00000000.  This is not necessarily the case in an AMP
environment.

Support CONFIG_RELOCATABLE for 476 in order to allow the kernel to be
loaded into a higher memory range.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

4 files changed, 48 insertions, 15 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c15f2e61e4fd..f8e578be5806 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -842,7 +842,7 @@ config LOWMEM_CAM_NUM
 
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
 	help
 	  This builds a kernel image that is capable of running at the
 	  location the kernel is loaded at (some alignment restrictions may
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index 92f863ac8443..a6eb6ad05b2d 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -3,8 +3,8 @@ CONFIG_SMP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
@@ -21,10 +21,11 @@ CONFIG_ISS4xx=y
 CONFIG_HZ_100=y
 CONFIG_MATH_EMULATION=y
 CONFIG_IRQ_ALL_CPUS=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="root=/dev/issblk0"
 # CONFIG_PCI is not set
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_RELOCATABLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -67,7 +68,6 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 5e12b741ba5f..f8e971ba94f5 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -93,6 +93,30 @@ _ENTRY(_start);
 
 	bl	early_init
 
+#ifdef CONFIG_RELOCATABLE
+	/*
+	 * r25 will contain RPN/ERPN for the start address of memory
+	 *
+	 * Add the difference between KERNELBASE and PAGE_OFFSET to the
+	 * start of physical memory to get kernstart_addr.
+	 */
+	lis	r3,kernstart_addr@ha
+	la	r3,kernstart_addr@l(r3)
+
+	lis	r4,KERNELBASE@h
+	ori	r4,r4,KERNELBASE@l
+	lis	r5,PAGE_OFFSET@h
+	ori	r5,r5,PAGE_OFFSET@l
+	subf	r4,r5,r4
+
+	rlwinm	r6,r25,0,28,31	/* ERPN */
+	rlwinm	r7,r25,0,0,3	/* RPN - assuming 256 MB page size */
+	add	r7,r7,r4
+
+	stw	r6,0(r3)
+	stw	r7,4(r3)
+#endif
+
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
@@ -1001,9 +1025,6 @@ clear_utlb_entry:
 	lis	r3,PAGE_OFFSET@h
 	ori	r3,r3,PAGE_OFFSET@l
 
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
 	/* Load the kernel PID = 0 */
 	li	r0,0
 	mtspr	SPRN_PID,r0
@@ -1013,9 +1034,8 @@ clear_utlb_entry:
 	clrrwi	r3,r3,12		/* Mask off the effective page number */
 	ori	r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
 
-	/* Word 1 */
-	clrrwi	r4,r4,12		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
+	/* Word 1 - use r25.  RPN is the same as the original entry */
+
 	/* Word 2 */
 	li	r5,0
 	ori	r5,r5,PPC47x_TLB2_S_RWX
@@ -1026,7 +1046,7 @@ clear_utlb_entry:
 	/* We write to way 0 and bolted 0 */
 	lis	r0,0x8800
 	tlbwe	r3,r0,0
-	tlbwe	r4,r0,1
+	tlbwe	r25,r0,1
 	tlbwe	r5,r0,2
 
 /*
@@ -1124,7 +1144,13 @@ head_start_common:
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
 	mtspr	SPRN_IVPR,r4
 
-	addis	r22,r22,KERNELBASE@h
+	/*
+	 * If the kernel was loaded at a non-zero 256 MB page, we need to
+	 * mask off the most significant 4 bits to get the relative address
+	 * from the start of physical memory
+	 */
+	rlwinm	r22,r22,0,4,31
+	addis	r22,r22,PAGE_OFFSET@h
 	mtlr	r22
 	isync
 	blr
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 024acab588fd..f60e006d90c3 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -186,10 +186,11 @@ void __init MMU_init_hw(void)
 unsigned long __init mmu_mapin_ram(unsigned long top)
 {
 	unsigned long addr;
+	unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
 
 	/* Pin in enough TLBs to cover any lowmem not covered by the
 	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+	for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
 	     addr += PPC_PIN_SIZE) {
 		if (mmu_has_feature(MMU_FTR_TYPE_47x))
 			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
@@ -218,19 +219,25 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 				phys_addr_t first_memblock_size)
 {
+	u64 size;
+
+#ifndef CONFIG_RELOCATABLE
 	/* We don't currently support the first MEMBLOCK not mapping 0
 	 * physical on those processors
 	 */
 	BUG_ON(first_memblock_base != 0);
+#endif
 
 	/* 44x has a 256M TLB entry pinned at boot */
-	memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+	size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+	memblock_set_current_limit(first_memblock_base + size);
 }
 
 #ifdef CONFIG_SMP
 void __cpuinit mmu_init_secondary(int cpu)
 {
 	unsigned long addr;
+	unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
 
 	/* Pin in enough TLBs to cover any lowmem not covered by the
 	 * initial 256M mapping established in head_44x.S
@@ -241,7 +248,7 @@ void __cpuinit mmu_init_secondary(int cpu)
 	 * stack. current (r2) isn't initialized, smp_processor_id()
 	 * will not work, current thread info isn't accessible, ...
 	 */
-	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+	for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
 	     addr += PPC_PIN_SIZE) {
 		if (mmu_has_feature(MMU_FTR_TYPE_47x))
 			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);