Merge /spare/repo/netdev-2.6 branch 'ieee80211'

6 files changed, 40 insertions, 15 deletions

diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index b6a63a49a232..191a8def3bdb 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -1449,3 +1449,5 @@ _GLOBAL(sys_call_table)
 	.long sys_request_key		/* 270 */
 	.long sys_keyctl
 	.long sys_waitid
+	.long sys_ioprio_set
+	.long sys_ioprio_get
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 334ef4150d92..6164a2b34733 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -606,9 +606,19 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 		struct page *page = pfn_to_page(pfn);
 		if (!PageReserved(page)
 		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm)
+			if (vma->vm_mm == current->active_mm) {
+#ifdef CONFIG_8xx
+			/* On 8xx, cache control instructions (particularly 
+		 	 * "dcbst" from flush_dcache_icache) fault as write 
+			 * operation if there is an unpopulated TLB entry 
+			 * for the address in question. To workaround that, 
+			 * we invalidate the TLB here, thus avoiding dcbst 
+			 * misbehaviour.
+			 */
+				_tlbie(address);
+#endif
 				__flush_dcache_icache((void *) address);
-			else
+			} else
 				flush_dcache_icache_page(page);
 			set_bit(PG_arch_1, &page->flags);
 		}
diff --git a/arch/ppc/platforms/pmac_sleep.S b/arch/ppc/platforms/pmac_sleep.S
index f459ade1bd63..016a74649155 100644
--- a/arch/ppc/platforms/pmac_sleep.S
+++ b/arch/ppc/platforms/pmac_sleep.S
@@ -46,7 +46,7 @@
 	.section .text
 	.align	5
 
-#if defined(CONFIG_PMAC_PBOOK) || defined(CONFIG_CPU_FREQ_PMAC)
+#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC)
 
 /* This gets called by via-pmu.c late during the sleep process.
  * The PMU was already send the sleep command and will shut us down
@@ -382,7 +382,7 @@ turn_on_mmu:
 	isync
 	rfi
 
-#endif /* defined(CONFIG_PMAC_PBOOK) || defined(CONFIG_CPU_FREQ) */
+#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */
 
 	.section .data
 	.balign	L1_CACHE_LINE_SIZE
diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c
index de60ccc7db9f..778ce4fec368 100644
--- a/arch/ppc/platforms/pmac_time.c
+++ b/arch/ppc/platforms/pmac_time.c
@@ -206,7 +206,7 @@ via_calibrate_decr(void)
 	return 1;
 }
 
-#ifdef CONFIG_PMAC_PBOOK
+#ifdef CONFIG_PM
 /*
  * Reset the time after a sleep.
  */
@@ -238,7 +238,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
 static struct pmu_sleep_notifier time_sleep_notifier __pmacdata = {
 	time_sleep_notify, SLEEP_LEVEL_MISC,
 };
-#endif /* CONFIG_PMAC_PBOOK */
+#endif /* CONFIG_PM */
 
 /*
  * Query the OF and get the decr frequency.
@@ -251,9 +251,9 @@ pmac_calibrate_decr(void)
 	struct device_node *cpu;
 	unsigned int freq, *fp;
 
-#ifdef CONFIG_PMAC_PBOOK
+#ifdef CONFIG_PM
 	pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif /* CONFIG_PMAC_PBOOK */
+#endif /* CONFIG_PM */
 
 	/* We assume MacRISC2 machines have correct device-tree
 	 * calibration. That's better since the VIA itself seems
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index 70e58f43f2b8..8b149c2fc54f 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -324,6 +324,7 @@ sandpoint_setup_arch(void)
 			pdata[1].irq = 0;
 			pdata[1].mapbase = 0;
 		}
+	}
 
 	printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n");
 	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index b45d8268bf93..ad39b86ca92c 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -370,8 +370,9 @@ void __init openpic_init(int offset)
 	/* Initialize IPI interrupts */
 	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
 	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
-		/* Disabled, Priority 10..13 */
-		openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset);
+		/* Disabled, increased priorities 10..13 */
+		openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
+				OPENPIC_VEC_IPI+i+offset);
 		/* IPIs are per-CPU */
 		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
 		irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
@@ -399,8 +400,9 @@ void __init openpic_init(int offset)
 		if (sense & IRQ_SENSE_MASK)
 			irq_desc[i+offset].status = IRQ_LEVEL;
 
-		/* Enabled, Priority 8 */
-		openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
+		/* Enabled, Default priority */
+		openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
+				(sense & IRQ_POLARITY_MASK),
 				(sense & IRQ_SENSE_MASK));
 		/* Processor 0 */
 		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
@@ -656,6 +658,18 @@ static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
 }
 
 /*
+ * Change the priority of an interrupt
+ */
+void __init
+openpic_set_irq_priority(u_int irq, u_int pri)
+{
+	check_arg_irq(irq);
+	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK,
+				pri << OPENPIC_PRIORITY_SHIFT);
+}
+
+/*
  * Initalize the interrupt source which will generate an NMI.
  * This raises the interrupt's priority from 8 to 9.
  *
@@ -665,9 +679,7 @@ void __init
 openpic_init_nmi_irq(u_int irq)
 {
 	check_arg_irq(irq);
-	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				9 << OPENPIC_PRIORITY_SHIFT);
+	openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
 }
 
 /*