Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4 files changed, 361 insertions, 0 deletions

diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile
new file mode 100644
index 000000000000..178891534b67
--- /dev/null
+++ b/arch/sh/boards/ec3104/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the EC3104 specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+
diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c
new file mode 100644
index 000000000000..a70928c44753
--- /dev/null
+++ b/arch/sh/boards/ec3104/io.c
@@ -0,0 +1,81 @@
+/*
+ * linux/arch/sh/kernel/io_ec3104.c
+ *  EC3104 companion chip support
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *
+ */
+/* EC3104 note:
+ * This code was written without any documentation about the EC3104 chip.  While
+ * I hope I got most of the basic functionality right, the register names I use
+ * are most likely completely different from those in the chip documentation.
+ *
+ * If you have any further information about the EC3104, please tell me
+ * (prumpf@tux.org).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/ec3104/ec3104.h>
+
+/*
+ * EC3104 has a real ISA bus which we redirect low port accesses to (the
+ * actual device on mine is a ESS 1868, and I don't want to hack the driver
+ * more than strictly necessary).  I am not going to duplicate the
+ * hard coding of PC addresses (for the 16550s aso) here though;  it's just
+ * too ugly.
+ */
+
+#define low_port(port) ((port) < 0x10000)
+
+static inline unsigned long port2addr(unsigned long port)
+{
+	switch(port >> 16) {
+	case 0:
+		return EC3104_ISA_BASE + port * 2;
+
+		/* XXX hack. it's unclear what to do about the serial ports */
+	case 1:
+		return EC3104_BASE + (port&0xffff) * 4;
+
+	default:
+		/* XXX PCMCIA */
+		return 0;
+	}
+}
+
+unsigned char ec3104_inb(unsigned long port)
+{
+	u8 ret;
+
+	ret = *(volatile u8 *)port2addr(port);
+
+	return ret;
+}
+
+unsigned short ec3104_inw(unsigned long port)
+{
+	BUG();
+}
+
+unsigned long ec3104_inl(unsigned long port)
+{
+	BUG();
+}
+
+void ec3104_outb(unsigned char data, unsigned long port)
+{
+	*(volatile u8 *)port2addr(port) = data;
+}
+
+void ec3104_outw(unsigned short data, unsigned long port)
+{
+	BUG();
+}
+
+void ec3104_outl(unsigned long data, unsigned long port)
+{
+	BUG();
+}
diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c
new file mode 100644
index 000000000000..ffa4ff1f090f
--- /dev/null
+++ b/arch/sh/boards/ec3104/irq.c
@@ -0,0 +1,196 @@
+/*
+ * linux/arch/sh/boards/ec3104/irq.c
+ * EC3104 companion chip support
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ec3104/ec3104.h>
+
+/* This is for debugging mostly;  here's the table that I intend to keep
+ * in here:
+ *
+ *   index      function        base addr       power           interrupt bit
+ *       0      power           b0ec0000        ---             00000001 (unused)
+ *       1      irqs            b0ec1000        ---             00000002 (unused)
+ *       2      ??              b0ec2000        b0ec0008        00000004
+ *       3      PS2 (1)         b0ec3000        b0ec000c        00000008
+ *       4      PS2 (2)         b0ec4000        b0ec0010        00000010
+ *       5      ??              b0ec5000        b0ec0014        00000020
+ *       6      I2C             b0ec6000        b0ec0018        00000040
+ *       7      serial (1)      b0ec7000        b0ec001c        00000080
+ *       8      serial (2)      b0ec8000        b0ec0020        00000100
+ *       9      serial (3)      b0ec9000        b0ec0024        00000200
+ *      10      serial (4)      b0eca000        b0ec0028        00000400
+ *      12      GPIO (1)        b0ecc000        b0ec0030
+ *      13      GPIO (2)        b0ecc000        b0ec0030
+ *      16      pcmcia (1)      b0ed0000        b0ec0040        00010000
+ *      17      pcmcia (2)      b0ed1000        b0ec0044        00020000
+ */
+
+/* I used the register names from another interrupt controller I worked with,
+ * since it seems to be identical to the ec3104 except that all bits are
+ * inverted:
+ *
+ * IRR: Interrupt Request Register (pending and enabled interrupts)
+ * IMR: Interrupt Mask Register (which interrupts are enabled)
+ * IPR: Interrupt Pending Register (pending interrupts, even disabled ones)
+ *
+ * 0 bits mean pending or enabled, 1 bits mean not pending or disabled.  all
+ * IRQs seem to be level-triggered.
+ */
+
+#define EC3104_IRR (EC3104_BASE + 0x1000)
+#define EC3104_IMR (EC3104_BASE + 0x1004)
+#define EC3104_IPR (EC3104_BASE + 0x1008)
+
+#define ctrl_readl(addr) (*(volatile u32 *)(addr))
+#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data))
+#define ctrl_readb(addr) (*(volatile u8 *)(addr))
+
+static char *ec3104_name(unsigned index)
+{
+        switch(index) {
+        case 0:
+                return "power management";
+        case 1:
+                return "interrupts";
+        case 3:
+                return "PS2 (1)";
+        case 4:
+                return "PS2 (2)";
+        case 5:
+                return "I2C (1)";
+        case 6:
+                return "I2C (2)";
+        case 7:
+                return "serial (1)";
+        case 8:
+                return "serial (2)";
+        case 9:
+                return "serial (3)";
+        case 10:
+                return "serial (4)";
+        case 16:
+                return "pcmcia (1)";
+        case 17:
+                return "pcmcia (2)";
+        default: {
+                static char buf[32];
+
+                sprintf(buf, "unknown (%d)", index);
+
+                return buf;
+                }
+        }
+}
+
+int get_pending_interrupts(char *buf)
+{
+        u32 ipr;
+        u32 bit;
+        char *p = buf;
+
+        p += sprintf(p, "pending: (");
+
+        ipr = ctrl_inl(EC3104_IPR);
+
+        for (bit = 1; bit < 32; bit++)
+                if (!(ipr & (1<<bit)))
+                        p += sprintf(p, "%s ", ec3104_name(bit));
+
+        p += sprintf(p, ")\n");
+
+        return p - buf;
+}
+
+static inline u32 ec3104_irq2mask(unsigned int irq)
+{
+        return (1 << (irq - EC3104_IRQBASE));
+}
+
+static inline void mask_ec3104_irq(unsigned int irq)
+{
+        u32 mask;
+
+        mask = ctrl_readl(EC3104_IMR);
+
+        mask |= ec3104_irq2mask(irq);
+
+        ctrl_writel(mask, EC3104_IMR);
+}
+
+static inline void unmask_ec3104_irq(unsigned int irq)
+{
+        u32 mask;
+
+        mask = ctrl_readl(EC3104_IMR);
+
+        mask &= ~ec3104_irq2mask(irq);
+
+        ctrl_writel(mask, EC3104_IMR);
+}
+
+static void disable_ec3104_irq(unsigned int irq)
+{
+        mask_ec3104_irq(irq);
+}
+
+static void enable_ec3104_irq(unsigned int irq)
+{
+        unmask_ec3104_irq(irq);
+}
+
+static void mask_and_ack_ec3104_irq(unsigned int irq)
+{
+        mask_ec3104_irq(irq);
+}
+
+static void end_ec3104_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                unmask_ec3104_irq(irq);
+}
+
+static unsigned int startup_ec3104_irq(unsigned int irq)
+{
+        unmask_ec3104_irq(irq);
+
+        return 0;
+}
+
+static void shutdown_ec3104_irq(unsigned int irq)
+{
+        mask_ec3104_irq(irq);
+
+}
+
+static struct hw_interrupt_type ec3104_int = {
+        .typename       = "EC3104",
+        .enable         = enable_ec3104_irq,
+        .disable        = disable_ec3104_irq,
+        .ack            = mask_and_ack_ec3104_irq,
+        .end            = end_ec3104_irq,
+        .startup        = startup_ec3104_irq,
+        .shutdown       = shutdown_ec3104_irq,
+};
+
+/* Yuck.  the _demux API is ugly */
+int ec3104_irq_demux(int irq)
+{
+        if (irq == EC3104_IRQ) {
+                unsigned int mask;
+
+                mask = ctrl_readl(EC3104_IRR);
+
+                if (mask == 0xffffffff)
+                        return EC3104_IRQ;
+                else
+                        return EC3104_IRQBASE + ffz(mask);
+        }
+
+        return irq;
+}
diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c
new file mode 100644
index 000000000000..5130ba2b6ff1
--- /dev/null
+++ b/arch/sh/boards/ec3104/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/ec3104/setup.c
+ *  EC3104 companion chip support
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *
+ */
+/* EC3104 note:
+ * This code was written without any documentation about the EC3104 chip.  While
+ * I hope I got most of the basic functionality right, the register names I use
+ * are most likely completely different from those in the chip documentation.
+ *
+ * If you have any further information about the EC3104, please tell me
+ * (prumpf@tux.org).
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/mach/ec3104.h>
+
+const char *get_system_type(void)
+{
+	return "EC3104";
+}
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_ec3104 __initmv = {
+	.mv_nr_irqs	= 96,
+
+	.mv_inb		= ec3104_inb,
+	.mv_inw		= ec3104_inw,
+	.mv_inl		= ec3104_inl,
+	.mv_outb	= ec3104_outb,
+	.mv_outw	= ec3104_outw,
+	.mv_outl	= ec3104_outl,
+
+	.mv_irq_demux	= ec3104_irq_demux,
+};
+
+ALIAS_MV(ec3104)
+
+int __init platform_setup(void)
+{
+	char str[8];
+	int i;
+	
+	if (0)
+		return 0;
+
+	for (i=0; i<8; i++)
+		str[i] = ctrl_readb(EC3104_BASE + i);
+
+	for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
+		irq_desc[i].handler = &ec3104_int;
+
+	printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
+	       str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
+
+
+	/* mask all interrupts.  this should have been done by the boot
+	 * loader for us but we want to be sure ... */
+	ctrl_writel(0xffffffff, EC3104_IMR);
+	
+	return 0;
+}
+