x86/entry/32: Re-implement SYSENTER using the new C path

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/5b99659e8be70f3dd10cd8970a5c90293d9ad9a7.1444091585.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

3 files changed, 51 insertions, 100 deletions

diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 88dc5ba14d47..0ed023d6a983 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -363,7 +363,7 @@ __visible void do_int80_syscall_32(struct pt_regs *regs)
 	syscall_return_slowpath(regs);
 }
 
-/* Returns 0 to return using IRET or 1 to return using SYSRETL. */
+/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
 __visible long do_fast_syscall_32(struct pt_regs *regs)
 {
 	/*
@@ -417,7 +417,20 @@ __visible long do_fast_syscall_32(struct pt_regs *regs)
 		regs->ip == landing_pad &&
 		(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF)) == 0;
 #else
-	return 0;
+	/*
+	 * Opportunistic SYSEXIT: if possible, try to return using SYSEXIT.
+	 *
+	 * Unlike 64-bit opportunistic SYSRET, we can't check that CX == IP,
+	 * because the ECX fixup above will ensure that this is essentially
+	 * never the case.
+	 *
+	 * We don't allow syscalls at all from VM86 mode, but we still
+	 * need to check VM, because we might be returning from sys_vm86.
+	 */
+	return static_cpu_has(X86_FEATURE_SEP) &&
+		regs->cs == __USER_CS && regs->ss == __USER_DS &&
+		regs->ip == landing_pad &&
+		(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF | X86_EFLAGS_VM)) == 0;
 #endif
 }
 #endif
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 02881e528945..c1c7c6364216 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -287,76 +287,47 @@ need_resched:
 END(resume_kernel)
 #endif
 
-/*
- * SYSENTER_RETURN points to after the SYSENTER instruction
- * in the vsyscall page.  See vsyscall-sysentry.S, which defines
- * the symbol.
- */
-
 	# SYSENTER  call handler stub
 ENTRY(entry_SYSENTER_32)
 	movl	TSS_sysenter_sp0(%esp), %esp
 sysenter_past_esp:
+	pushl	$__USER_DS		/* pt_regs->ss */
+	pushl	%ecx			/* pt_regs->cx */
+	pushfl				/* pt_regs->flags (except IF = 0) */
+	orl	$X86_EFLAGS_IF, (%esp)	/* Fix IF */
+	pushl	$__USER_CS		/* pt_regs->cs */
+	pushl	$0			/* pt_regs->ip = 0 (placeholder) */
+	pushl	%eax			/* pt_regs->orig_ax */
+	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
+
 	/*
-	 * Interrupts are disabled here, but we can't trace it until
-	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
-	 * we immediately enable interrupts at that point anyway.
-	 */
-	pushl	$__USER_DS
-	pushl	%ebp
-	pushfl
-	orl	$X86_EFLAGS_IF, (%esp)
-	pushl	$__USER_CS
-	/*
-	 * Push current_thread_info()->sysenter_return to the stack.
-	 * A tiny bit of offset fixup is necessary: TI_sysenter_return
-	 * is relative to thread_info, which is at the bottom of the
-	 * kernel stack page.  4*4 means the 4 words pushed above;
-	 * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
-	 * and THREAD_SIZE takes us to the bottom.
+	 * User mode is traced as though IRQs are on, and SYSENTER
+	 * turned them off.
 	 */
-	pushl	((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
-
-	pushl	%eax
-	SAVE_ALL
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-/*
- * Load the potential sixth argument from user stack.
- * Careful about security.
- */
-	cmpl	$__PAGE_OFFSET-3, %ebp
-	jae	syscall_fault
-	ASM_STAC
-1:	movl	(%ebp), %ebp
-	ASM_CLAC
-	movl	%ebp, PT_EBP(%esp)
-	_ASM_EXTABLE(1b, syscall_fault)
-
-	GET_THREAD_INFO(%ebp)
-
-	testl	$_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp)
-	jnz	syscall_trace_entry
-sysenter_do_call:
-	cmpl	$(NR_syscalls), %eax
-	jae	sysenter_badsys
-	call	*sys_call_table(, %eax, 4)
-sysenter_after_call:
-	movl	%eax, PT_EAX(%esp)
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
-	movl	TI_flags(%ebp), %ecx
-	testl	$_TIF_ALLWORK_MASK, %ecx
-	jnz	syscall_exit_work_irqs_off
-sysenter_exit:
-/* if something modifies registers it must also disable sysexit */
-	movl	PT_EIP(%esp), %edx
-	movl	PT_OLDESP(%esp), %ecx
-	xorl	%ebp, %ebp
-	TRACE_IRQS_ON
+
+	movl	%esp, %eax
+	call	do_fast_syscall_32
+	testl	%eax, %eax
+	jz	.Lsyscall_32_done
+
+/* Opportunistic SYSEXIT */
+	TRACE_IRQS_ON			/* User mode traces as IRQs on. */
+	movl	PT_EIP(%esp), %edx	/* pt_regs->ip */
+	movl	PT_OLDESP(%esp), %ecx	/* pt_regs->sp */
+	popl	%ebx			/* pt_regs->bx */
+	addl	$2*4, %esp		/* skip pt_regs->cx and pt_regs->dx */
+	popl	%esi			/* pt_regs->si */
+	popl	%edi			/* pt_regs->di */
+	popl	%ebp			/* pt_regs->bp */
+	popl	%eax			/* pt_regs->ax */
 1:	mov	PT_FS(%esp), %fs
 	PTGS_TO_GS
+
+	/*
+	 * Return back to the vDSO, which will pop ecx and edx.
+	 * Don't bother with DS and ES (they already contain __USER_DS).
+	 */
 	ENABLE_INTERRUPTS_SYSEXIT
 
 .pushsection .fixup, "ax"
@@ -371,7 +342,7 @@ ENDPROC(entry_SYSENTER_32)
 ENTRY(entry_INT80_32)
 	ASM_CLAC
 	pushl	%eax			/* pt_regs->orig_ax */
-	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest, load -ENOSYS into ax */
+	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
 
 	/*
 	 * User mode is traced as though IRQs are on, and the interrupt gate
@@ -381,6 +352,7 @@ ENTRY(entry_INT80_32)
 
 	movl	%esp, %eax
 	call	do_int80_syscall_32
+.Lsyscall_32_done:
 
 restore_all:
 	TRACE_IRQS_IRET
@@ -457,42 +429,6 @@ ldt_ss:
 #endif
 ENDPROC(entry_INT80_32)
 
-	# perform syscall exit tracing
-	ALIGN
-syscall_trace_entry:
-	movl	$-ENOSYS, PT_EAX(%esp)
-	movl	%esp, %eax
-	call	syscall_trace_enter
-	/* What it returned is what we'll actually use.  */
-	cmpl	$(NR_syscalls), %eax
-	jnae	syscall_call
-	jmp	syscall_exit
-END(syscall_trace_entry)
-
-	# perform syscall exit tracing
-	ALIGN
-syscall_exit_work_irqs_off:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)
-
-syscall_exit_work:
-	movl	%esp, %eax
-	call	syscall_return_slowpath
-	jmp	restore_all
-END(syscall_exit_work)
-
-syscall_fault:
-	ASM_CLAC
-	GET_THREAD_INFO(%ebp)
-	movl	$-EFAULT, PT_EAX(%esp)
-	jmp	resume_userspace
-END(syscall_fault)
-
-sysenter_badsys:
-	movl	$-ENOSYS, %eax
-	jmp	sysenter_after_call
-END(sysenter_badsys)
-
 .macro FIXUP_ESPFIX_STACK
 /*
  * Switch back for ESPFIX stack to the normal zerobased stack
diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S
index 00157cae71e0..93bd8452383f 100644
--- a/arch/x86/entry/vdso/vdso32/system_call.S
+++ b/arch/x86/entry/vdso/vdso32/system_call.S
@@ -34,6 +34,8 @@ __kernel_vsyscall:
 	/* If SYSENTER (Intel) or SYSCALL32 (AMD) is available, use it. */
 	ALTERNATIVE_2 "", "sysenter", X86_FEATURE_SYSENTER32, \
 	                  "syscall",  X86_FEATURE_SYSCALL32
+#else
+	ALTERNATIVE "", "sysenter", X86_FEATURE_SEP
 #endif
 
 	/* Enter using int $0x80 */