x86, trace: Add irq vector tracepoints

[Purpose of this patch]

As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.

http://www.spinics.net/lists/mm-commits/msg85707.html

<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled.  They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.

There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers.  Tracing such events gives
us the information about IRQ interaction with other system events.

The trace also tells where the system is spending its time.  We want to
know which cores are handling interrupts and how they are affecting other
processes in the system.  Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>

On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.

I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.

[Patch Description]

Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.

So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
   - local_timer_vector
   - reschedule_vector
   - call_function_vector
   - call_function_single_vector
   - irq_work_entry_vector
   - error_apic_vector
   - thermal_apic_vector
   - threshold_apic_vector
   - spurious_apic_vector
   - x86_platform_ipi_vector

Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
 - Create trace irq handlers with entering_irq()/exiting_irq().
 - Create a new IDT, trace_idt_table, at boot time by adding a logic to
   _set_gate(). It is just a copy of original idt table.
 - Register the new handlers for tracpoints to the new IDT by introducing
   macros to alloc_intr_gate() called at registering time of irq_vector handlers.
 - Add checking, whether irq vector tracing is on/off, into load_current_idt().
   This has to be done below debug checking for these reasons.
   - Switching to debug IDT may be kicked while tracing is enabled.
   - On the other hands, switching to trace IDT is kicked only when debugging
     is disabled.

In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 24 insertions, 7 deletions

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 727208941030..11eef43f971f 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1138,7 +1138,7 @@ END(common_interrupt)
 /*
  * APIC interrupts.
  */
-.macro apicinterrupt num sym do_sym
+.macro apicinterrupt3 num sym do_sym
 ENTRY(\sym)
 	INTR_FRAME
 	ASM_CLAC
@@ -1150,15 +1150,32 @@ ENTRY(\sym)
 END(\sym)
 .endm
 
+#ifdef CONFIG_TRACING
+#define trace(sym) trace_##sym
+#define smp_trace(sym) smp_trace_##sym
+
+.macro trace_apicinterrupt num sym
+apicinterrupt3 \num trace(\sym) smp_trace(\sym)
+.endm
+#else
+.macro trace_apicinterrupt num sym do_sym
+.endm
+#endif
+
+.macro apicinterrupt num sym do_sym
+apicinterrupt3 \num \sym \do_sym
+trace_apicinterrupt \num \sym
+.endm
+
 #ifdef CONFIG_SMP
-apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
+apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
 	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
-apicinterrupt REBOOT_VECTOR \
+apicinterrupt3 REBOOT_VECTOR \
 	reboot_interrupt smp_reboot_interrupt
 #endif
 
 #ifdef CONFIG_X86_UV
-apicinterrupt UV_BAU_MESSAGE \
+apicinterrupt3 UV_BAU_MESSAGE \
 	uv_bau_message_intr1 uv_bau_message_interrupt
 #endif
 apicinterrupt LOCAL_TIMER_VECTOR \
@@ -1167,7 +1184,7 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR \
 	x86_platform_ipi smp_x86_platform_ipi
 
 #ifdef CONFIG_HAVE_KVM
-apicinterrupt POSTED_INTR_VECTOR \
+apicinterrupt3 POSTED_INTR_VECTOR \
 	kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
 #endif
 
@@ -1451,13 +1468,13 @@ ENTRY(xen_failsafe_callback)
 	CFI_ENDPROC
 END(xen_failsafe_callback)
 
-apicinterrupt HYPERVISOR_CALLBACK_VECTOR \
+apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
 	xen_hvm_callback_vector xen_evtchn_do_upcall
 
 #endif /* CONFIG_XEN */
 
 #if IS_ENABLED(CONFIG_HYPERV)
-apicinterrupt HYPERVISOR_CALLBACK_VECTOR \
+apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
 	hyperv_callback_vector hyperv_vector_handler
 #endif /* CONFIG_HYPERV */