x86: Use memblock to replace early_res

1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
   replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
   so adjust some calling later in setup.c::setup_arch()
   -- corruption_check and mptable_update

-v2: Move reserve_brk() early
    Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
    that could happen We have more then 128 RAM entry in E820 tables, and
    memblock_x86_fill() could use memblock_find_in_range() to find a new place for
    memblock.memory.region array.
    and We don't need to use extend_brk() after fill_memblock_area()
    So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
    To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
    in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
    memblock.reserved already..
    use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
    active_region for 32bit does include high pages
    need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline

Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 33 insertions, 13 deletions

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4ae4acbd031..bbe0aaf77494 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -31,6 +31,7 @@
 #include <linux/apm_bios.h>
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/mca.h>
@@ -614,7 +615,7 @@ static __init void reserve_ibft_region(void)
 	addr = find_ibft_region(&size);
 
 	if (size)
-		reserve_early_overlap_ok(addr, addr + size, "ibft");
+		memblock_x86_reserve_range(addr, addr + size, "* ibft");
 }
 
 #ifdef CONFIG_X86_RESERVE_LOW_64K
@@ -708,6 +709,15 @@ static void __init trim_bios_range(void)
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 }
 
+static u64 __init get_max_mapped(void)
+{
+	u64 end = max_pfn_mapped;
+
+	end <<= PAGE_SHIFT;
+
+	return end;
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -891,8 +901,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	max_pfn = e820_end_of_ram_pfn();
 
-	/* preallocate 4k for mptable mpc */
-	early_reserve_e820_mpc_new();
 	/* update e820 for memory not covered by WB MTRRs */
 	mtrr_bp_init();
 	if (mtrr_trim_uncached_memory(max_pfn))
@@ -917,15 +925,6 @@ void __init setup_arch(char **cmdline_p)
 	max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
 #endif
 
-#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
-	setup_bios_corruption_check();
-#endif
-
-	printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
-			max_pfn_mapped<<PAGE_SHIFT);
-
-	reserve_brk();
-
 	/*
 	 * Find and reserve possible boot-time SMP configuration:
 	 */
@@ -933,6 +932,26 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_ibft_region();
 
+	/*
+	 * Need to conclude brk, before memblock_x86_fill()
+	 *  it could use memblock_find_in_range, could overlap with
+	 *  brk area.
+	 */
+	reserve_brk();
+
+	memblock.current_limit = get_max_mapped();
+	memblock_x86_fill();
+
+	/* preallocate 4k for mptable mpc */
+	early_reserve_e820_mpc_new();
+
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+	setup_bios_corruption_check();
+#endif
+
+	printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
+			max_pfn_mapped<<PAGE_SHIFT);
+
 	reserve_trampoline_memory();
 
 #ifdef CONFIG_ACPI_SLEEP
@@ -956,6 +975,7 @@ void __init setup_arch(char **cmdline_p)
 		max_low_pfn = max_pfn;
 	}
 #endif
+	memblock.current_limit = get_max_mapped();
 
 	/*
 	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
@@ -995,7 +1015,7 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn, acpi, k8);
 #ifndef CONFIG_NO_BOOTMEM
-	early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
+	memblock_x86_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
 #endif
 
 	dma32_reserve_bootmem();