Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
  Blackfin arch: add BF54x I2C/TWI TWI0 driver support
  Blackfin On-Chip RTC driver update for supporting BF54x
  Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
  Blackfin arch: add error message when IRQ no available
  Blackfin arch: Initialize the exception vectors early in the boot process
  Blackfin arch: fix a compiling warning about dma-mapping
  Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
  Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
  Blackfin arch: Load P0 before storing through it
  Blackfin arch: fix KGDB bug, dont forget last parameter.
  Blackfin arch: add selections for BF544 and BF542
  Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
  Blackfin arch: setup aliases for some core Core A MMRs

9 files changed, 76 insertions, 54 deletions

diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 1b75672dfc8f..20841663270f 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533
 machine-$(CONFIG_BF534) := bf537
 machine-$(CONFIG_BF536) := bf537
 machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF542) := bf548
+machine-$(CONFIG_BF544) := bf548
 machine-$(CONFIG_BF548) := bf548
 machine-$(CONFIG_BF549) := bf548
 machine-$(CONFIG_BF561) := bf561
@@ -36,6 +38,8 @@ cpu-$(CONFIG_BF533) := bf533
 cpu-$(CONFIG_BF534) := bf534
 cpu-$(CONFIG_BF536) := bf536
 cpu-$(CONFIG_BF537) := bf537
+cpu-$(CONFIG_BF542) := bf542
+cpu-$(CONFIG_BF544) := bf544
 cpu-$(CONFIG_BF548) := bf548
 cpu-$(CONFIG_BF549) := bf549
 cpu-$(CONFIG_BF561) := bf561
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index ea48d5b13f11..94d7b119b71e 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -160,7 +160,8 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	BUG_ON(direction == DMA_NONE);
 
 	for (i = 0; i < nents; i++, sg++) {
-		sg->dma_address = page_address(sg->page) + sg->offset;
+		sg->dma_address = (dma_addr_t)(page_address(sg->page) +
+					sg->offset);
 
 		invalidate_dcache_range(sg_dma_address(sg),
 					sg_dma_address(sg) +
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f59dcee7bae3..88f221b89b33 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -402,11 +402,7 @@ void __init setup_arch(char **cmdline_p)
 	if (l1_length > L1_DATA_A_LENGTH)
 		panic("L1 data memory overflow\n");
 
-#ifdef BF561_FAMILY
-	_bfin_swrst = bfin_read_SICA_SWRST();
-#else
 	_bfin_swrst = bfin_read_SWRST();
-#endif
 
 	/* Copy atomic sequences to their fixed location, and sanity check that
 	   these locations are the ones that we advertise to userspace.  */
@@ -429,6 +425,7 @@ void __init setup_arch(char **cmdline_p)
 	BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
 	       != ATOMIC_XOR32 - FIXED_CODE_START);
 
+	init_exception_vectors();
 	bf53x_cache_init();
 }
 
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 3909f5b35536..8766bd612b47 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -140,7 +140,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_KGDB
 # define CHK_DEBUGGER_TRAP() \
 	do { \
-		CHK_DEBUGGER(trapnr, sig, info.si_code, fp); \
+		CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
 	} while (0)
 # define CHK_DEBUGGER_TRAP_MAYBE() \
 	do { \
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d06f860f4790..fb53780247bc 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -32,6 +32,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/mem_map.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf32-bfin")
 ENTRY(__start)
@@ -64,8 +65,12 @@ SECTIONS
 
 	.data :
 	{
-		. = ALIGN(PAGE_SIZE);
+		/* make sure the init_task is aligned to the
+		 * kernel thread size so we can locate the kernel
+		 * stack properly and quickly.
+		 */
 		__sdata = .;
+		. = ALIGN(THREAD_SIZE);
 		*(.data.init_task)
 		DATA_DATA
 		CONSTRUCTORS
@@ -73,14 +78,14 @@ SECTIONS
 		. = ALIGN(32);
 		*(.data.cacheline_aligned)
 
-		. = ALIGN(PAGE_SIZE);
+		. = ALIGN(THREAD_SIZE);
 		__edata = .;
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 	.init :
 	{
+		. = ALIGN(PAGE_SIZE);
 		__sinittext = .;
 		*(.init.text)
 		__einittext = .;
@@ -153,10 +158,9 @@ SECTIONS
 		__ebss_b_l1 = .;
 	}
 
-	. = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
-	___init_end = ALIGN(PAGE_SIZE);
+	___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
 
-	.bss ___init_end :
+	.bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
 	{
 		. = ALIGN(4);
 		___bss_start = .;
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 2f08bcb2dded..38650a628980 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -440,15 +440,15 @@ ENTRY(_bfin_reset)
 	SSYNC;
 
 	/* make sure SYSCR is set to use BMODE */
-	P0.h = hi(SICA_SYSCR);
-	P0.l = lo(SICA_SYSCR);
-	R0.l = 0x20;
+	P0.h = hi(SYSCR);
+	P0.l = lo(SYSCR);
+	R0.l = 0x20;		/* on BF561, disable core b */
 	W[P0] = R0.l;
 	SSYNC;
 
 	/* issue a system soft reset */
-	P1.h = hi(SICA_SWRST);
-	P1.l = lo(SICA_SWRST);
+	P1.h = hi(SWRST);
+	P1.l = lo(SWRST);
 	R1.l = 0x0007;
 	W[P1] = R1;
 	SSYNC;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
index 9d475623b724..5be6b975ae4a 100644
--- a/arch/blackfin/mach-common/cacheinit.S
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -60,6 +60,9 @@ ENDPROC(_bfin_write_IMEM_CONTROL)
 
 #if defined(CONFIG_BLKFIN_DCACHE)
 ENTRY(_bfin_write_DMEM_CONTROL)
+	P0.l = (DMEM_CONTROL & 0xFFFF);
+	P0.h = (DMEM_CONTROL >> 16);
+
 	CLI R1;
 	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
 	.align 8;
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 6b9fd03ce835..660f881b620a 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -358,26 +358,10 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq,
 
 #endif				/* CONFIG_IRQCHIP_DEMUX_GPIO */
 
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
+void __init init_exception_vectors(void)
 {
-	int irq;
-	unsigned long ilat = 0;
-	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
-	bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
-	bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
 	SSYNC();
 
-	bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
-	local_irq_disable();
-
-	init_exception_buff();
-
 #ifndef CONFIG_KGDB
 	bfin_write_EVT0(evt_emulation);
 #endif
@@ -395,6 +379,27 @@ int __init init_arch_irq(void)
 	bfin_write_EVT14(evt14_softirq);
 	bfin_write_EVT15(evt_system_call);
 	CSYNC();
+}
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+	int irq;
+	unsigned long ilat = 0;
+	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
+	bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
+	bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
+	SSYNC();
+
+	bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
+	bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
+
+	local_irq_disable();
+
+	init_exception_buff();
 
 	for (irq = 0; irq <= SYS_IRQS; irq++) {
 		if (irq <= IRQ_CORETMR)
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 28a878c3577a..4708023fe716 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -579,8 +579,12 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 	u16 gpionr = irq - IRQ_PA0;
 	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
 
-	if (pint_val == IRQ_NOT_AVAIL)
+	if (pint_val == IRQ_NOT_AVAIL) {
+		printk(KERN_ERR
+		"GPIO IRQ %d :Not in PINT Assign table "
+		"Reconfigure Interrupt to Port Assignemt\n", irq);
 		return -ENODEV;
+	}
 
 	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
 		ret = gpio_request(gpionr, NULL);
@@ -713,6 +717,29 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
 }
 #endif				/* CONFIG_IRQCHIP_DEMUX_GPIO */
 
+void __init init_exception_vectors(void)
+{
+	SSYNC();
+
+#ifndef CONFIG_KGDB
+	bfin_write_EVT0(evt_emulation);
+#endif
+	bfin_write_EVT2(evt_evt2);
+	bfin_write_EVT3(trap);
+	bfin_write_EVT5(evt_ivhw);
+	bfin_write_EVT6(evt_timer);
+	bfin_write_EVT7(evt_evt7);
+	bfin_write_EVT8(evt_evt8);
+	bfin_write_EVT9(evt_evt9);
+	bfin_write_EVT10(evt_evt10);
+	bfin_write_EVT11(evt_evt11);
+	bfin_write_EVT12(evt_evt12);
+	bfin_write_EVT13(evt_evt13);
+	bfin_write_EVT14(evt14_softirq);
+	bfin_write_EVT15(evt_system_call);
+	CSYNC();
+}
+
 /*
  * This function should be called during kernel startup to initialize
  * the BFin IRQ handling routines.
@@ -733,29 +760,10 @@ int __init init_arch_irq(void)
 	bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
 	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
 #endif
-
 	SSYNC();
 
 	local_irq_disable();
 
-#ifndef CONFIG_KGDB
-	bfin_write_EVT0(evt_emulation);
-#endif
-	bfin_write_EVT2(evt_evt2);
-	bfin_write_EVT3(trap);
-	bfin_write_EVT5(evt_ivhw);
-	bfin_write_EVT6(evt_timer);
-	bfin_write_EVT7(evt_evt7);
-	bfin_write_EVT8(evt_evt8);
-	bfin_write_EVT9(evt_evt9);
-	bfin_write_EVT10(evt_evt10);
-	bfin_write_EVT11(evt_evt11);
-	bfin_write_EVT12(evt_evt12);
-	bfin_write_EVT13(evt_evt13);
-	bfin_write_EVT14(evt14_softirq);
-	bfin_write_EVT15(evt_system_call);
-	CSYNC();
-
 #if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
 #ifdef CONFIG_PINTx_REASSIGN
 	pint[0]->assign = CONFIG_PINT0_ASSIGN;