diff options
| author | Madalin Bucur | 2020-03-16 14:05:58 +0200 |
|---|---|---|
| committer | David S. Miller | 2020-03-16 14:58:33 -0700 |
| commit | d79e9d7c1e4ba5f95f2ff3541880c40ea9722212 (patch) | |
| tree | 37c4c0ac37329f26a8c9534691c9d142bf6f3a0f /arch | |
| parent | 4022d808c45277693ea86478fab1f081ebf997e8 (diff) | |
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
The correct setting for the RGMII ports on LS1046ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii".
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index dbc23d6cd3b4..d53ccc56bb63 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -131,12 +131,12 @@ &fman0 { ethernet@e4000 { phy-handle = <&rgmii_phy1>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; }; ethernet@e6000 { phy-handle = <&rgmii_phy2>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; }; ethernet@e8000 { |