Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 platform changes from Ingo Molnar.

Removes the Moorestown platform that nobody ever used.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform: Move APIC ID validity check into platform APIC code
  x86/olpc/xo15/sci: Enable lid close wakeup control
  x86/geode/net5501: Add platform driver for Soekris Engineering net5501
  x86/geode/alix2: Supplement driver to include GPIO button support
  x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu
  x86/mid/thermal: Turn off thermistor
  x86/mid/thermal: Add msic_thermal alias
  x86/mid/thermal: Convert to use Intel MSIC API
  x86/mid/scu_ipc: Remove Moorestown support
  x86/mid: Kill off Moorestown
  x86/mrst: Add msic_thermal platform support
  x86/config: Select MSIC MFD driver on Intel Medfield platform
  x86/mid: Remove Intel Moorestown
  x86/mrst: Set ISA bus type for fake MP IRQs
  x86/ioapic: Use legacy_pic to set correct gsi-irq mapping

23 files changed, 360 insertions, 1127 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6c29256a71a6..901952355969 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -422,27 +422,6 @@ if X86_WANT_INTEL_MID
 config X86_INTEL_MID
 	bool
 
-config X86_MRST
-       bool "Moorestown MID platform"
-	depends on PCI
-	depends on PCI_GOANY
-	depends on X86_IO_APIC
-	select X86_INTEL_MID
-	select SFI
-	select DW_APB_TIMER
-	select APB_TIMER
-	select I2C
-	select SPI
-	select INTEL_SCU_IPC
-	select X86_PLATFORM_DEVICES
-	---help---
-	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
-	  Internet Device(MID) platform. Moorestown consists of two chips:
-	  Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
-	  Unlike standard x86 PCs, Moorestown does not have many legacy devices
-	  nor standard legacy replacement devices/features. e.g. Moorestown does
-	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
-
 config X86_MDFLD
        bool "Medfield MID platform"
 	depends on PCI
@@ -456,6 +435,7 @@ config X86_MDFLD
 	select SPI
 	select INTEL_SCU_IPC
 	select X86_PLATFORM_DEVICES
+	select MFD_INTEL_MSIC
 	---help---
 	  Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin
 	  Internet Device(MID) platform. 
@@ -2139,6 +2119,12 @@ config ALIX
 
 	  Note: You have to set alix.force=1 for boards with Award BIOS.
 
+config NET5501
+	bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)"
+	select GPIOLIB
+	---help---
+	  This option enables system support for the Soekris Engineering net5501.
+
 endif # X86_32
 
 config AMD_NB
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 3ab9bdd87e79..a9371c91718c 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -288,6 +288,7 @@ struct apic {
 
 	int (*probe)(void);
 	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	int (*apic_id_valid)(int apicid);
 	int (*apic_id_registered)(void);
 
 	u32 irq_delivery_mode;
@@ -532,6 +533,11 @@ static inline unsigned int read_apic_id(void)
 	return apic->get_apic_id(reg);
 }
 
+static inline int default_apic_id_valid(int apicid)
+{
+	return x2apic_mode || (apicid < 255);
+}
+
 extern void default_setup_apic_routing(void);
 
 extern struct apic apic_noop;
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 0a0a95460434..fc18bf3ce7c8 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -26,8 +26,8 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
  * identified via MSRs.
  */
 enum mrst_cpu_type {
-	MRST_CPU_CHIP_LINCROFT = 1,
-	MRST_CPU_CHIP_PENWELL,
+	/* 1 was Moorestown */
+	MRST_CPU_CHIP_PENWELL = 2,
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 8c3cdded6f2b..359b6899a36c 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -180,6 +180,7 @@ static struct apic apic_flat =  {
 	.name				= "flat",
 	.probe				= flat_probe,
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= flat_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
@@ -337,6 +338,7 @@ static struct apic apic_physflat =  {
 	.name				= "physical flat",
 	.probe				= physflat_probe,
 	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= flat_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index 775b82bc655c..634ae6cdd5c9 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -124,6 +124,7 @@ struct apic apic_noop = {
 	.probe				= noop_probe,
 	.acpi_madt_oem_check		= NULL,
 
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= noop_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 09d3d8c1cd99..d9ea5f331ac5 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -56,6 +56,12 @@ static unsigned int read_xapic_id(void)
 	return get_apic_id(apic_read(APIC_ID));
 }
 
+static int numachip_apic_id_valid(int apicid)
+{
+	/* Trust what bootloader passes in MADT */
+	return 1;
+}
+
 static int numachip_apic_id_registered(void)
 {
 	return physid_isset(read_xapic_id(), phys_cpu_present_map);
@@ -223,10 +229,11 @@ static int __init numachip_system_init(void)
 }
 early_initcall(numachip_system_init);
 
-static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __cpuinit numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strncmp(oem_id, "NUMASC", 6)) {
 		numachip_system = 1;
+		setup_force_cpu_cap(X86_FEATURE_X2APIC);
 		return 1;
 	}
 
@@ -238,6 +245,7 @@ static struct apic apic_numachip __refconst = {
 	.name				= "NumaConnect system",
 	.probe				= numachip_probe,
 	.acpi_madt_oem_check		= numachip_acpi_madt_oem_check,
+	.apic_id_valid			= numachip_apic_id_valid,
 	.apic_id_registered		= numachip_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 521bead01137..0cdec7065aff 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -198,6 +198,7 @@ static struct apic apic_bigsmp = {
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
 	.acpi_madt_oem_check		= NULL,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= bigsmp_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 5d513bc47b6b..e42d1d3b9134 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -625,6 +625,7 @@ static struct apic __refdata apic_es7000_cluster = {
 	.name				= "es7000",
 	.probe				= probe_es7000,
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check_cluster,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= es7000_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
@@ -690,6 +691,7 @@ static struct apic __refdata apic_es7000 = {
 	.name				= "es7000",
 	.probe				= probe_es7000,
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= es7000_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index c4a61ca1349a..00d2422ca7c9 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -478,6 +478,7 @@ static struct apic __refdata apic_numaq = {
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
 	.acpi_madt_oem_check		= NULL,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= numaq_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 0787bb3412f4..ff2c1b9aac4d 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -92,6 +92,7 @@ static struct apic apic_default = {
 	.name				= "default",
 	.probe				= probe_default,
 	.acpi_madt_oem_check		= NULL,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= default_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 19114423c58c..fea000b27f07 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -496,6 +496,7 @@ static struct apic apic_summit = {
 	.name				= "summit",
 	.probe				= probe_summit,
 	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= summit_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 500795875827..9193713060a9 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -213,6 +213,7 @@ static struct apic apic_x2apic_cluster = {
 	.name				= "cluster x2apic",
 	.probe				= x2apic_cluster_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index f5373dfde21e..bcd1db6eaca9 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -119,6 +119,7 @@ static struct apic apic_x2apic_phys = {
 	.name				= "physical x2apic",
 	.probe				= x2apic_phys_probe,
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 79b05b88aa19..fc4771425852 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -351,6 +351,7 @@ static struct apic __refdata apic_x2apic_uv_x = {
 	.name				= "UV large system",
 	.probe				= uv_probe,
 	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= uv_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index dccebbe758ca..e578a79a3093 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -833,7 +833,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
 	    !physid_isset(apicid, phys_cpu_present_map) ||
-	    (!x2apic_mode && apicid >= 255)) {
+	    !apic->apic_id_valid(apicid)) {
 		printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
 		return -EINVAL;
 	}
diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
index 07c9cd05021a..246b788847ff 100644
--- a/arch/x86/platform/geode/Makefile
+++ b/arch/x86/platform/geode/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_ALIX)		+= alix.o
+obj-$(CONFIG_NET5501)		+= net5501.o
diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
index dc5f1d32aced..90e23e7679a5 100644
--- a/arch/x86/platform/geode/alix.c
+++ b/arch/x86/platform/geode/alix.c
@@ -6,6 +6,7 @@
  *
  * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
  * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
+ *                and Philip Prindeville <philipp@redfish-solutions.com>
  *
  * TODO: There are large similarities with leds-net5501.c
  * by Alessandro Zummo <a.zummo@towertech.it>
@@ -24,14 +25,47 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/dmi.h>
 
 #include <asm/geode.h>
 
+#define BIOS_SIGNATURE_TINYBIOS		0xf0000
+#define BIOS_SIGNATURE_COREBOOT		0x500
+#define BIOS_REGION_SIZE		0x10000
+
 static bool force = 0;
 module_param(force, bool, 0444);
 /* FIXME: Award bios is not automatically detected as Alix platform */
 MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
 
+static struct gpio_keys_button alix_gpio_buttons[] = {
+	{
+		.code			= KEY_RESTART,
+		.gpio			= 24,
+		.active_low		= 1,
+		.desc			= "Reset button",
+		.type			= EV_KEY,
+		.wakeup			= 0,
+		.debounce_interval	= 100,
+		.can_disable		= 0,
+	}
+};
+static struct gpio_keys_platform_data alix_buttons_data = {
+	.buttons			= alix_gpio_buttons,
+	.nbuttons			= ARRAY_SIZE(alix_gpio_buttons),
+	.poll_interval			= 20,
+};
+
+static struct platform_device alix_buttons_dev = {
+	.name				= "gpio-keys-polled",
+	.id				= 1,
+	.dev = {
+		.platform_data		= &alix_buttons_data,
+	}
+};
+
 static struct gpio_led alix_leds[] = {
 	{
 		.name = "alix:1",
@@ -64,17 +98,22 @@ static struct platform_device alix_leds_dev = {
 	.dev.platform_data = &alix_leds_data,
 };
 
+static struct __initdata platform_device *alix_devs[] = {
+	&alix_buttons_dev,
+	&alix_leds_dev,
+};
+
 static void __init register_alix(void)
 {
 	/* Setup LED control through leds-gpio driver */
-	platform_device_register(&alix_leds_dev);
+	platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs));
 }
 
-static int __init alix_present(unsigned long bios_phys,
+static bool __init alix_present(unsigned long bios_phys,
 				const char *alix_sig,
 				size_t alix_sig_len)
 {
-	const size_t bios_len = 0x00010000;
+	const size_t bios_len = BIOS_REGION_SIZE;
 	const char *bios_virt;
 	const char *scan_end;
 	const char *p;
@@ -84,7 +123,7 @@ static int __init alix_present(unsigned long bios_phys,
 		printk(KERN_NOTICE "%s: forced to skip BIOS test, "
 		       "assume system is ALIX.2/ALIX.3\n",
 		       KBUILD_MODNAME);
-		return 1;
+		return true;
 	}
 
 	bios_virt = phys_to_virt(bios_phys);
@@ -109,15 +148,33 @@ static int __init alix_present(unsigned long bios_phys,
 			*a = '\0';
 
 		tail = p + alix_sig_len;
-		if ((tail[0] == '2' || tail[0] == '3')) {
+		if ((tail[0] == '2' || tail[0] == '3' || tail[0] == '6')) {
 			printk(KERN_INFO
 			       "%s: system is recognized as \"%s\"\n",
 			       KBUILD_MODNAME, name);
-			return 1;
+			return true;
 		}
 	}
 
-	return 0;
+	return false;
+}
+
+static bool __init alix_present_dmi(void)
+{
+	const char *vendor, *product;
+
+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (!vendor || strcmp(vendor, "PC Engines"))
+		return false;
+
+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!product || (strcmp(product, "ALIX.2D") && strcmp(product, "ALIX.6")))
+		return false;
+
+	printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
+	       KBUILD_MODNAME, vendor, product);
+
+	return true;
 }
 
 static int __init alix_init(void)
@@ -128,8 +185,9 @@ static int __init alix_init(void)
 	if (!is_geode())
 		return 0;
 
-	if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
-	    alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
+	if (alix_present(BIOS_SIGNATURE_TINYBIOS, tinybios_sig, sizeof(tinybios_sig) - 1) ||
+	    alix_present(BIOS_SIGNATURE_COREBOOT, coreboot_sig, sizeof(coreboot_sig) - 1) ||
+	    alix_present_dmi())
 		register_alix();
 
 	return 0;
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c
new file mode 100644
index 000000000000..66d377e334f7
--- /dev/null
+++ b/arch/x86/platform/geode/net5501.c
@@ -0,0 +1,154 @@
+/*
+ * System Specific setup for Soekris net5501
+ * At the moment this means setup of GPIO control of LEDs and buttons
+ * on net5501 boards.
+ *
+ *
+ * Copyright (C) 2008-2009 Tower Technologies
+ * Written by Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
+ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
+ *                and Philip Prindeville <philipp@redfish-solutions.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <asm/geode.h>
+
+#define BIOS_REGION_BASE		0xffff0000
+#define BIOS_REGION_SIZE		0x00010000
+
+static struct gpio_keys_button net5501_gpio_buttons[] = {
+	{
+		.code = KEY_RESTART,
+		.gpio = 24,
+		.active_low = 1,
+		.desc = "Reset button",
+		.type = EV_KEY,
+		.wakeup = 0,
+		.debounce_interval = 100,
+		.can_disable = 0,
+	}
+};
+static struct gpio_keys_platform_data net5501_buttons_data = {
+	.buttons = net5501_gpio_buttons,
+	.nbuttons = ARRAY_SIZE(net5501_gpio_buttons),
+	.poll_interval = 20,
+};
+
+static struct platform_device net5501_buttons_dev = {
+	.name = "gpio-keys-polled",
+	.id = 1,
+	.dev = {
+		.platform_data = &net5501_buttons_data,
+	}
+};
+
+static struct gpio_led net5501_leds[] = {
+	{
+		.name = "net5501:1",
+		.gpio = 6,
+		.default_trigger = "default-on",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data net5501_leds_data = {
+	.num_leds = ARRAY_SIZE(net5501_leds),
+	.leds = net5501_leds,
+};
+
+static struct platform_device net5501_leds_dev = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev.platform_data = &net5501_leds_data,
+};
+
+static struct __initdata platform_device *net5501_devs[] = {
+	&net5501_buttons_dev,
+	&net5501_leds_dev,
+};
+
+static void __init register_net5501(void)
+{
+	/* Setup LED control through leds-gpio driver */
+	platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs));
+}
+
+struct net5501_board {
+	u16	offset;
+	u16	len;
+	char	*sig;
+};
+
+static struct net5501_board __initdata boards[] = {
+	{ 0xb7b, 7, "net5501" },	/* net5501 v1.33/1.33c */
+	{ 0xb1f, 7, "net5501" },	/* net5501 v1.32i */
+};
+
+static bool __init net5501_present(void)
+{
+	int i;
+	unsigned char *rombase, *bios;
+	bool found = false;
+
+	rombase = ioremap(BIOS_REGION_BASE, BIOS_REGION_SIZE - 1);
+	if (!rombase) {
+		printk(KERN_ERR "%s: failed to get rombase\n", KBUILD_MODNAME);
+		return found;
+	}
+
+	bios = rombase + 0x20;	/* null terminated */
+
+	if (memcmp(bios, "comBIOS", 7))
+		goto unmap;
+
+	for (i = 0; i < ARRAY_SIZE(boards); i++) {
+		unsigned char *model = rombase + boards[i].offset;
+
+		if (!memcmp(model, boards[i].sig, boards[i].len)) {
+			printk(KERN_INFO "%s: system is recognized as \"%s\"\n",
+			       KBUILD_MODNAME, model);
+
+			found = true;
+			break;
+		}
+	}
+
+unmap:
+	iounmap(rombase);
+	return found;
+}
+
+static int __init net5501_init(void)
+{
+	if (!is_geode())
+		return 0;
+
+	if (!net5501_present())
+		return 0;
+
+	register_net5501();
+
+	return 0;
+}
+
+module_init(net5501_init);
+
+MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
+MODULE_DESCRIPTION("Soekris net5501 System Setup");
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index 7baed5135e0f..af1da7e623f9 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,4 +1,3 @@
 obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
 obj-$(CONFIG_X86_INTEL_MID)	+= vrtc.o
 obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_mrst.o
-obj-$(CONFIG_X86_MRST)		+= pmu.o
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 475e2cd0f3c3..721e65285dce 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -78,16 +78,11 @@ int sfi_mrtc_num;
 
 static void mrst_power_off(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
 }
 
 static void mrst_reboot(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
-	else
-		intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
 }
 
 /* parse all the mtimer info to a static mtimer array */
@@ -200,34 +195,28 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 
 static unsigned long __init mrst_calibrate_tsc(void)
 {
-	unsigned long flags, fast_calibrate;
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
-		u32 lo, hi, ratio, fsb;
-
-		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
-		ratio = (hi >> 8) & 0x1f;
-		pr_debug("ratio is %d\n", ratio);
-		if (!ratio) {
-			pr_err("read a zero ratio, should be incorrect!\n");
-			pr_err("force tsc ratio to 16 ...\n");
-			ratio = 16;
-		}
-		rdmsr(MSR_FSB_FREQ, lo, hi);
-		if ((lo & 0x7) == 0x7)
-			fsb = PENWELL_FSB_FREQ_83SKU;
-		else
-			fsb = PENWELL_FSB_FREQ_100SKU;
-		fast_calibrate = ratio * fsb;
-		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
-		lapic_timer_frequency = fsb * 1000 / HZ;
-		/* mark tsc clocksource as reliable */
-		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	} else {
-		local_irq_save(flags);
-		fast_calibrate = apbt_quick_calibrate();
-		local_irq_restore(flags);
+	unsigned long fast_calibrate;
+	u32 lo, hi, ratio, fsb;
+
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+	ratio = (hi >> 8) & 0x1f;
+	pr_debug("ratio is %d\n", ratio);
+	if (!ratio) {
+		pr_err("read a zero ratio, should be incorrect!\n");
+		pr_err("force tsc ratio to 16 ...\n");
+		ratio = 16;
 	}
+	rdmsr(MSR_FSB_FREQ, lo, hi);
+	if ((lo & 0x7) == 0x7)
+		fsb = PENWELL_FSB_FREQ_83SKU;
+	else
+		fsb = PENWELL_FSB_FREQ_100SKU;
+	fast_calibrate = ratio * fsb;
+	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+	lapic_timer_frequency = fsb * 1000 / HZ;
+	/* mark tsc clocksource as reliable */
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
 	
 	if (fast_calibrate)
 		return fast_calibrate;
@@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
 		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
 	else {
-		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
 			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
 	}
-	pr_debug("Moorestown CPU %s identified\n",
-		(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
-		"Lincroft" : "Penwell");
 }
 
 /* MID systems don't have i8042 controller */
@@ -686,6 +670,11 @@ static void *msic_ocd_platform_data(void *info)
 	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
 }
 
+static void *msic_thermal_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
 static const struct devs_id __initconst device_ids[] = {
 	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
@@ -705,6 +694,7 @@ static const struct devs_id __initconst device_ids[] = {
 	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
 	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
 	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
 
 	{},
 };
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
deleted file mode 100644
index c0ac06da57ac..000000000000
--- a/arch/x86/platform/mrst/pmu.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/*
- * mrst/pmu.c - driver for MRST Power Management Unit
- *
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/cpuidle.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/sfi.h>
-#include <asm/intel_scu_ipc.h>
-#include "pmu.h"
-
-#define IPCMSG_FW_REVISION	0xF4
-
-struct mrst_device {
-	u16 pci_dev_num;	/* DEBUG only */
-	u16 lss;
-	u16 latest_request;
-	unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
-};
-
-/*
- * comlete list of MRST PCI devices
- */
-static struct mrst_device mrst_devs[] = {
-/*  0 */ { 0x0800, LSS_SPI0 },		/* Moorestown SPI Ctrl 0 */
-/*  1 */ { 0x0801, LSS_SPI1 },		/* Moorestown SPI Ctrl 1 */
-/*  2 */ { 0x0802, LSS_I2C0 },		/* Moorestown I2C 0 */
-/*  3 */ { 0x0803, LSS_I2C1 },		/* Moorestown I2C 1 */
-/*  4 */ { 0x0804, LSS_I2C2 },		/* Moorestown I2C 2 */
-/*  5 */ { 0x0805, LSS_KBD },		/* Moorestown Keyboard Ctrl */
-/*  6 */ { 0x0806, LSS_USB_HC },	/* Moorestown USB Ctrl */
-/*  7 */ { 0x0807, LSS_SD_HC0 },	/* Moorestown SD Host Ctrl 0 */
-/*  8 */ { 0x0808, LSS_SD_HC1 },	/* Moorestown SD Host Ctrl 1 */
-/*  9 */ { 0x0809, LSS_NAND },		/* Moorestown NAND Ctrl */
-/* 10 */ { 0x080a, LSS_AUDIO },		/* Moorestown Audio Ctrl */
-/* 11 */ { 0x080b, LSS_IMAGING },	/* Moorestown ISP */
-/* 12 */ { 0x080c, LSS_SECURITY },	/* Moorestown Security Controller */
-/* 13 */ { 0x080d, LSS_DISPLAY },	/* Moorestown External Displays */
-/* 14 */ { 0x080e, 0 },			/* Moorestown SCU IPC */
-/* 15 */ { 0x080f, LSS_GPIO },		/* Moorestown GPIO Controller */
-/* 16 */ { 0x0810, 0 },			/* Moorestown Power Management Unit */
-/* 17 */ { 0x0811, LSS_USB_OTG },	/* Moorestown OTG Ctrl */
-/* 18 */ { 0x0812, LSS_SPI2 },		/* Moorestown SPI Ctrl 2 */
-/* 19 */ { 0x0813, 0 },			/* Moorestown SC DMA */
-/* 20 */ { 0x0814, LSS_AUDIO_LPE },	/* Moorestown LPE DMA */
-/* 21 */ { 0x0815, LSS_AUDIO_SSP },	/* Moorestown SSP0 */
-
-/* 22 */ { 0x084F, LSS_SD_HC2 },	/* Moorestown SD Host Ctrl 2 */
-
-/* 23 */ { 0x4102, 0 },			/* Lincroft */
-/* 24 */ { 0x4110, 0 },			/* Lincroft */
-};
-
-/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
-static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
-static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
-					0x0804, 0x0805, 0x080f, 0};
-
-/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
-static spinlock_t mrst_pmu_power_state_lock;
-
-static unsigned int wake_counters[MRST_NUM_LSS];	/* DEBUG only */
-static unsigned int pmu_irq_stats[INT_INVALID + 1];	/* DEBUG only */
-
-static int graphics_is_off;
-static int lss_s0i3_enabled;
-static bool mrst_pmu_s0i3_enable;
-
-/*  debug counters */
-static u32 pmu_wait_ready_calls;
-static u32 pmu_wait_ready_udelays;
-static u32 pmu_wait_ready_udelays_max;
-static u32 pmu_wait_done_calls;
-static u32 pmu_wait_done_udelays;
-static u32 pmu_wait_done_udelays_max;
-static u32 pmu_set_power_state_entry;
-static u32 pmu_set_power_state_send_cmd;
-
-static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
-{
-	int index = 0;
-
-	if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
-		index = pci_dev_num - 0x800;
-	else if (pci_dev_num == 0x084F)
-		index = 22;
-	else if (pci_dev_num == 0x4102)
-		index = 23;
-	else if (pci_dev_num == 0x4110)
-		index = 24;
-
-	if (pci_dev_num != mrst_devs[index].pci_dev_num) {
-		WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
-		return 0;
-	}
-
-	return &mrst_devs[index];
-}
-
-/**
- * mrst_pmu_validate_cstates
- * @dev: cpuidle_device
- *
- * Certain states are not appropriate for governor to pick in some cases.
- * This function will be called as cpuidle_device's prepare callback and
- * thus tells governor to ignore such states when selecting the next state
- * to enter.
- */
-
-#define IDLE_STATE4_IS_C6	4
-#define IDLE_STATE5_IS_S0I3	5
-
-int mrst_pmu_invalid_cstates(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Demote to C4 if the PMU is busy.
-	 * Since LSS changes leave the busy bit clear...
-	 * busy means either the PMU is waiting for an ACK-C6 that
-	 * isn't coming due to an MWAIT that returned immediately;
-	 * or we returned from S0i3 successfully, and the PMU
-	 * is not done sending us interrupts.
-	 */
-	if (pmu_read_busy_status())
-		return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
-
-	/*
-	 * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
-	 * or if device LSS is insufficient, or the GPU is active,
-	 * or if it has been explicitly disabled.
-	 */
-	if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
-	    !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
-		return 1 << IDLE_STATE5_IS_S0I3;
-	else
-		return 0;
-}
-
-/*
- * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
- * DEBUG only.
- */
-static void pmu_update_wake_counters(void)
-{
-	int lss;
-	u32 wake_status;
-
-	wake_status = pmu_read_wks();
-
-	for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
-		if (wake_status & (1 << lss))
-			wake_counters[lss]++;
-	}
-}
-
-int mrst_pmu_s0i3_entry(void)
-{
-	int status;
-
-	/* Clear any possible error conditions */
-	pmu_write_ics(0x300);
-
-	/* set wake control to current D-states */
-	pmu_write_wssc(S0I3_SSS_TARGET);
-
-	status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
-	pmu_update_wake_counters();
-	return status;
-}
-
-/* poll for maximum of 5ms for busy bit to clear */
-static int pmu_wait_ready(void)
-{
-	int udelays;
-
-	pmu_wait_ready_calls++;
-
-	for (udelays = 0; udelays < 500; ++udelays) {
-		if (udelays > pmu_wait_ready_udelays_max)
-			pmu_wait_ready_udelays_max = udelays;
-
-		if (pmu_read_busy_status() == 0)
-			return 0;
-
-		udelay(10);
-		pmu_wait_ready_udelays++;
-	}
-
-	/*
-	 * if this fires, observe
-	 * /sys/kernel/debug/mrst_pmu_wait_ready_calls
-	 * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
-	 */
-	WARN_ONCE(1, "SCU not ready for 5ms");
-	return -EBUSY;
-}
-/* poll for maximum of 50ms us for busy bit to clear */
-static int pmu_wait_done(void)
-{
-	int udelays;
-
-	pmu_wait_done_calls++;
-
-	for (udelays = 0; udelays < 500; ++udelays) {
-		if (udelays > pmu_wait_done_udelays_max)
-			pmu_wait_done_udelays_max = udelays;
-
-		if (pmu_read_busy_status() == 0)
-			return 0;
-
-		udelay(100);
-		pmu_wait_done_udelays++;
-	}
-
-	/*
-	 * if this fires, observe
-	 * /sys/kernel/debug/mrst_pmu_wait_done_calls
-	 * /sys/kernel/debug/mrst_pmu_wait_done_udelays
-	 */
-	WARN_ONCE(1, "SCU not done for 50ms");
-	return -EBUSY;
-}
-
-u32 mrst_pmu_msi_is_disabled(void)
-{
-	return pmu_msi_is_disabled();
-}
-
-void mrst_pmu_enable_msi(void)
-{
-	pmu_msi_enable();
-}
-
-/**
- * pmu_irq - pmu driver interrupt handler
- * Context: interrupt context
- */
-static irqreturn_t pmu_irq(int irq, void *dummy)
-{
-	union pmu_pm_ics pmu_ics;
-
-	pmu_ics.value = pmu_read_ics();
-
-	if (!pmu_ics.bits.pending)
-		return IRQ_NONE;
-
-	switch (pmu_ics.bits.cause) {
-	case INT_SPURIOUS:
-	case INT_CMD_DONE:
-	case INT_CMD_ERR:
-	case INT_WAKE_RX:
-	case INT_SS_ERROR:
-	case INT_S0IX_MISS:
-	case INT_NO_ACKC6:
-		pmu_irq_stats[pmu_ics.bits.cause]++;
-		break;
-	default:
-		pmu_irq_stats[INT_INVALID]++;
-	}
-
-	pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Translate PCI power management to MRST LSS D-states
- */
-static int pci_2_mrst_state(int lss, pci_power_t pci_state)
-{
-	switch (pci_state) {
-	case PCI_D0:
-		if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
-			return D0i1;
-		else
-			return D0;
-	case PCI_D1:
-		return D0i1;
-	case PCI_D2:
-		return D0i2;
-	case PCI_D3hot:
-	case PCI_D3cold:
-		return D0i3;
-	default:
-		WARN(1, "pci_state %d\n", pci_state);
-		return 0;
-	}
-}
-
-static int pmu_issue_command(u32 pm_ssc)
-{
-	union pmu_pm_set_cfg_cmd_t command;
-
-	if (pmu_read_busy_status()) {
-		pr_debug("pmu is busy, Operation not permitted\n");
-		return -1;
-	}
-
-	/*
-	 * enable interrupts in PMU so that interrupts are
-	 * propagated when ioc bit for a particular set
-	 * command is set
-	 */
-
-	pmu_irq_enable();
-
-	/* Configure the sub systems for pmu2 */
-
-	pmu_write_ssc(pm_ssc);
-
-	/*
-	 * Send the set config command for pmu its configured
-	 * for mode CM_IMMEDIATE & hence with No Trigger
-	 */
-
-	command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
-	command.pmu2_params.d_param.cfg_delay = 0;
-	command.pmu2_params.d_param.rsvd = 0;
-
-	/* construct the command to send SET_CFG to particular PMU */
-	command.pmu2_params.d_param.cmd = SET_CFG_CMD;
-	command.pmu2_params.d_param.ioc = 0;
-	command.pmu2_params.d_param.mode_id = 0;
-	command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
-
-	/* write the value of PM_CMD into particular PMU */
-	pr_debug("pmu command being written %x\n",
-			command.pmu_pm_set_cfg_cmd_value);
-
-	pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
-
-	return 0;
-}
-
-static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
-{
-	u16 existing_request;
-	int i;
-
-	for (i = 0; ids[i]; ++i) {
-		struct mrst_device *mrst_dev;
-
-		mrst_dev = pci_id_2_mrst_dev(ids[i]);
-		if (unlikely(!mrst_dev))
-			continue;
-
-		existing_request = mrst_dev->latest_request;
-		if (existing_request < pci_state)
-			pci_state = existing_request;
-	}
-	return pci_state;
-}
-
-/**
- * pmu_pci_set_power_state - Callback function is used by all the PCI devices
- *			for a platform  specific device power on/shutdown.
- */
-
-int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
-{
-	u32 old_sss, new_sss;
-	int status = 0;
-	struct mrst_device *mrst_dev;
-
-	pmu_set_power_state_entry++;
-
-	BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
-	BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
-
-	mrst_dev = pci_id_2_mrst_dev(pdev->device);
-	if (unlikely(!mrst_dev))
-		return -ENODEV;
-
-	mrst_dev->pci_state_counts[pci_state]++;	/* count invocations */
-
-	/* PMU driver calls self as part of PCI initialization, ignore */
-	if (pdev->device == PCI_DEV_ID_MRST_PMU)
-		return 0;
-
-	BUG_ON(!pmu_reg); /* SW bug if called before initialized */
-
-	spin_lock(&mrst_pmu_power_state_lock);
-
-	if (pdev->d3_delay) {
-		dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
-			pdev->d3_delay);
-		pdev->d3_delay = 0;
-	}
-	/*
-	 * If Lincroft graphics, simply remember state
-	 */
-	if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
-		&& !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
-		if (pci_state == PCI_D0)
-			graphics_is_off = 0;
-		else
-			graphics_is_off = 1;
-		goto ret;
-	}
-
-	if (!mrst_dev->lss)
-		goto ret;	/* device with no LSS */
-
-	if (mrst_dev->latest_request == pci_state)
-		goto ret;	/* no change */
-
-	mrst_dev->latest_request = pci_state;	/* record latest request */
-
-	/*
-	 * LSS9 and LSS10 contain multiple PCI devices.
-	 * Use the lowest numbered (highest power) state in the LSS
-	 */
-	if (mrst_dev->lss == 9)
-		pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
-	else if (mrst_dev->lss == 10)
-		pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
-
-	status = pmu_wait_ready();
-	if (status)
-		goto ret;
-
-	old_sss = pmu_read_sss();
-	new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
-	new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
-			mrst_dev->lss);
-
-	if (new_sss == old_sss)
-		goto ret;	/* nothing to do */
-
-	pmu_set_power_state_send_cmd++;
-
-	status = pmu_issue_command(new_sss);
-
-	if (unlikely(status != 0)) {
-		dev_err(&pdev->dev, "Failed to Issue a PM command\n");
-		goto ret;
-	}
-
-	if (pmu_wait_done())
-		goto ret;
-
-	lss_s0i3_enabled =
-	((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
-ret:
-	spin_unlock(&mrst_pmu_power_state_lock);
-	return status;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
-
-static inline const char *d0ix_name(int state)
-{
-	return d0ix_names[(int) state];
-}
-
-static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
-{
-	struct pci_dev *pdev = NULL;
-	u32 cur_pmsss;
-	int lss;
-
-	seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
-
-	cur_pmsss = pmu_read_sss();
-
-	seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
-
-	seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
-	seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
-
-	if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
-		seq_printf(s, "cpu0 is only cpu online\n");
-	else
-		seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
-
-	seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
-
-
-	for_each_pci_dev(pdev) {
-		int pos;
-		u16 pmcsr;
-		struct mrst_device *mrst_dev;
-		int i;
-
-		mrst_dev = pci_id_2_mrst_dev(pdev->device);
-
-		seq_printf(s, "%s %04x/%04X %-16.16s ",
-			dev_name(&pdev->dev),
-			pdev->vendor, pdev->device,
-			dev_driver_string(&pdev->dev));
-
-		if (unlikely (!mrst_dev)) {
-			seq_printf(s, " UNKNOWN\n");
-			continue;
-		}
-
-		if (mrst_dev->lss)
-			seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
-				d0ix_name(((cur_pmsss >>
-					(mrst_dev->lss * 2)) & 0x3)));
-		else
-			seq_printf(s, "            ");
-
-		/* PCI PM config space setting */
-		pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
-		if (pos != 0) {
-			pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
-		seq_printf(s, "PCI-%-4s",
-			pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
-		} else {
-			seq_printf(s, "        ");
-		}
-
-		seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
-		for (i = 0; i <= PCI_D3cold; ++i)
-			seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
-
-		if (mrst_dev->lss) {
-			unsigned int lssmask;
-
-			lssmask = SSMSK(D0i3, mrst_dev->lss);
-
-			if ((lssmask & S0I3_SSS_TARGET) &&
-				((lssmask & cur_pmsss) !=
-					(lssmask & S0I3_SSS_TARGET)))
-						seq_printf(s , "[BLOCKS s0i3]");
-		}
-
-		seq_printf(s, "\n");
-	}
-	seq_printf(s, "Wake Counters:\n");
-	for (lss = 0; lss < MRST_NUM_LSS; ++lss)
-		seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
-
-	seq_printf(s, "Interrupt Counters:\n");
-	seq_printf(s,
-		"INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
-		"INT_CMD_ERR  \t%8u\n" "INT_WAKE_RX  \t%8u\n"
-		"INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
-		"INT_NO_ACKC6 \t%8u\n" "INT_INVALID  \t%8u\n",
-		pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
-		pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
-		pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
-		pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
-
-	seq_printf(s, "mrst_pmu_wait_ready_calls          %8d\n",
-			pmu_wait_ready_calls);
-	seq_printf(s, "mrst_pmu_wait_ready_udelays        %8d\n",
-			pmu_wait_ready_udelays);
-	seq_printf(s, "mrst_pmu_wait_ready_udelays_max    %8d\n",
-			pmu_wait_ready_udelays_max);
-	seq_printf(s, "mrst_pmu_wait_done_calls           %8d\n",
-			pmu_wait_done_calls);
-	seq_printf(s, "mrst_pmu_wait_done_udelays         %8d\n",
-			pmu_wait_done_udelays);
-	seq_printf(s, "mrst_pmu_wait_done_udelays_max     %8d\n",
-			pmu_wait_done_udelays_max);
-	seq_printf(s, "mrst_pmu_set_power_state_entry     %8d\n",
-			pmu_set_power_state_entry);
-	seq_printf(s, "mrst_pmu_set_power_state_send_cmd  %8d\n",
-			pmu_set_power_state_send_cmd);
-	seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
-
-	return 0;
-}
-
-static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, debug_mrst_pmu_show, NULL);
-}
-
-static const struct file_operations devices_state_operations = {
-	.open		= debug_mrst_pmu_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif	/* DEBUG_FS */
-
-/*
- * Validate SCU PCI shim PCI vendor capability byte
- * against LSS hard-coded in mrst_devs[] above.
- * DEBUG only.
- */
-static void pmu_scu_firmware_debug(void)
-{
-	struct pci_dev *pdev = NULL;
-
-	for_each_pci_dev(pdev) {
-		struct mrst_device *mrst_dev;
-		u8 pci_config_lss;
-		int pos;
-
-		mrst_dev = pci_id_2_mrst_dev(pdev->device);
-		if (unlikely(!mrst_dev)) {
-			printk(KERN_ERR FW_BUG "pmu: Unknown "
-				"PCI device 0x%04X\n", pdev->device);
-			continue;
-		}
-
-		if (mrst_dev->lss == 0)
-			continue;	 /* no LSS in our table */
-
-		pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
-		if (!pos != 0) {
-			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
-				"missing PCI Vendor Capability\n",
-				pdev->device);
-			continue;
-		}
-		pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
-		if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
-			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
-				"invalid PCI Vendor Capability 0x%x "
-				" expected LSS 0x%X\n",
-				pdev->device, pci_config_lss, mrst_dev->lss);
-			continue;
-		}
-		pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
-
-		if (mrst_dev->lss == pci_config_lss)
-			continue;
-
-		printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
-			pdev->device, pci_config_lss, mrst_dev->lss);
-	}
-}
-
-/**
- * pmu_probe
- */
-static int __devinit pmu_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *pci_id)
-{
-	int ret;
-	struct mrst_pmu_reg *pmu;
-
-	/* Init the device */
-	ret = pci_enable_device(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to Enable PCI device\n");
-		return ret;
-	}
-
-	ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
-		goto out_err1;
-	}
-
-	/* Map the memory of PMU reg base */
-	pmu = pci_iomap(pdev, 0, 0);
-	if (!pmu) {
-		dev_err(&pdev->dev, "Unable to map the PMU address space\n");
-		ret = -ENOMEM;
-		goto out_err2;
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	/* /sys/kernel/debug/mrst_pmu */
-	(void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
-				NULL, NULL, &devices_state_operations);
-#endif
-	pmu_reg = pmu;	/* success */
-
-	if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
-		dev_err(&pdev->dev, "Registering isr has failed\n");
-		ret = -1;
-		goto out_err3;
-	}
-
-	pmu_scu_firmware_debug();
-
-	pmu_write_wkc(S0I3_WAKE_SOURCES);	/* Enable S0i3 wakeup sources */
-
-	pmu_wait_ready();
-
-	pmu_write_ssc(D0I1_ACG_SSS_TARGET);	/* Enable Auto-Clock_Gating */
-	pmu_write_cmd(0x201);
-
-	spin_lock_init(&mrst_pmu_power_state_lock);
-
-	/* Enable the hardware interrupt */
-	pmu_irq_enable();
-	return 0;
-
-out_err3:
-	free_irq(pdev->irq, NULL);
-	pci_iounmap(pdev, pmu_reg);
-	pmu_reg = NULL;
-out_err2:
-	pci_release_region(pdev, 0);
-out_err1:
-	pci_disable_device(pdev);
-	return ret;
-}
-
-static void __devexit pmu_remove(struct pci_dev *pdev)
-{
-	dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
-
-	/* Freeing up the irq */
-	free_irq(pdev->irq, NULL);
-
-	pci_iounmap(pdev, pmu_reg);
-	pmu_reg = NULL;
-
-	/* disable the current PCI device */
-	pci_release_region(pdev, 0);
-	pci_disable_device(pdev);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
-	{ PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
-
-static struct pci_driver driver = {
-	.name = MRST_PMU_DRV_NAME,
-	.id_table = pmu_pci_ids,
-	.probe = pmu_probe,
-	.remove = __devexit_p(pmu_remove),
-};
-
-/**
- * pmu_pci_register - register the PMU driver as PCI device
- */
-static int __init pmu_pci_register(void)
-{
-	return pci_register_driver(&driver);
-}
-
-/* Register and probe via fs_initcall() to preceed device_initcall() */
-fs_initcall(pmu_pci_register);
-
-static void __exit mid_pci_cleanup(void)
-{
-	pci_unregister_driver(&driver);
-}
-
-static int ia_major;
-static int ia_minor;
-
-static int pmu_sfi_parse_oem(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-
-	sb = (struct sfi_table_simple *)table;
-	ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
-	ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
-	printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
-		ia_major, ia_minor);
-
-	return 0;
-}
-
-static int __init scu_fw_check(void)
-{
-	int ret;
-	u32 fw_version;
-
-	if (!pmu_reg)
-		return 0;	/* this driver didn't probe-out */
-
-	sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
-
-	if (ia_major < 0x6005 || ia_minor < 0x1525) {
-		WARN(1, "mrst_pmu: IA FW version too old\n");
-		return -1;
-	}
-
-	ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
-					&fw_version, 1);
-
-	if (ret) {
-		WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
-	} else {
-		int scu_major = (fw_version >> 8) & 0xFF;
-		int scu_minor = (fw_version >> 0) & 0xFF;
-
-		printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
-
-		if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
-			printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
-			mrst_pmu_s0i3_enable = true;
-		} else {
-			WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
-					scu_major, scu_minor);
-		}
-	}
-	return 0;
-}
-late_initcall(scu_fw_check);
-module_exit(mid_pci_cleanup);
diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h
deleted file mode 100644
index bfbfe64b167b..000000000000
--- a/arch/x86/platform/mrst/pmu.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
- *
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _MRST_PMU_H_
-#define _MRST_PMU_H_
-
-#define PCI_DEV_ID_MRST_PMU		0x0810
-#define MRST_PMU_DRV_NAME		"mrst_pmu"
-#define	PCI_SUB_CLASS_MASK		0xFF00
-
-#define	PCI_VENDOR_CAP_LOG_ID_MASK	0x7F
-#define PCI_VENDOR_CAP_LOG_SS_MASK	0x80
-
-#define SUB_SYS_ALL_D0I1	0x01155555
-#define S0I3_WAKE_SOURCES	0x00001FFF
-
-#define PM_S0I3_COMMAND					\
-	((0 << 31) |	/* Reserved */			\
-	(0 << 30) |	/* Core must be idle */		\
-	(0xc2 << 22) |	/* ACK C6 trigger */		\
-	(3 << 19) |	/* Trigger on DMI message */	\
-	(3 << 16) |	/* Enter S0i3 */		\
-	(0 << 13) |	/* Numeric mode ID (sw) */	\
-	(3 << 9) |	/* Trigger mode */		\
-	(0 << 8) |	/* Do not interrupt */		\
-	(1 << 0))	/* Set configuration */
-
-#define	LSS_DMI		0
-#define	LSS_SD_HC0	1
-#define	LSS_SD_HC1	2
-#define	LSS_NAND	3
-#define	LSS_IMAGING	4
-#define	LSS_SECURITY	5
-#define	LSS_DISPLAY	6
-#define	LSS_USB_HC	7
-#define	LSS_USB_OTG	8
-#define	LSS_AUDIO	9
-#define	LSS_AUDIO_LPE	9
-#define	LSS_AUDIO_SSP	9
-#define	LSS_I2C0	10
-#define	LSS_I2C1	10
-#define	LSS_I2C2	10
-#define	LSS_KBD		10
-#define	LSS_SPI0	10
-#define	LSS_SPI1	10
-#define	LSS_SPI2	10
-#define	LSS_GPIO	10
-#define	LSS_SRAM	11	/* used by SCU, do not touch */
-#define	LSS_SD_HC2	12
-/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
-#define MRST_NUM_LSS	13
-
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-
-#define	SSMSK(mask, lss) ((mask) << ((lss) * 2))
-#define	D0	0
-#define	D0i1	1
-#define	D0i2	2
-#define	D0i3	3
-
-#define S0I3_SSS_TARGET	(		\
-	SSMSK(D0i1, LSS_DMI) |		\
-	SSMSK(D0i3, LSS_SD_HC0) |	\
-	SSMSK(D0i3, LSS_SD_HC1) |	\
-	SSMSK(D0i3, LSS_NAND) |		\
-	SSMSK(D0i3, LSS_SD_HC2) |	\
-	SSMSK(D0i3, LSS_IMAGING) |	\
-	SSMSK(D0i3, LSS_SECURITY) |	\
-	SSMSK(D0i3, LSS_DISPLAY) |	\
-	SSMSK(D0i3, LSS_USB_HC) |	\
-	SSMSK(D0i3, LSS_USB_OTG) |	\
-	SSMSK(D0i3, LSS_AUDIO) |	\
-	SSMSK(D0i1, LSS_I2C0))
-
-/*
- * D0i1 on Langwell is Autonomous Clock Gating (ACG).
- * Enable ACG on every LSS except camera and audio
- */
-#define D0I1_ACG_SSS_TARGET	 \
-	(SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
-
-enum cm_mode {
-	CM_NOP,			/* ignore the config mode value */
-	CM_IMMEDIATE,
-	CM_DELAY,
-	CM_TRIGGER,
-	CM_INVALID
-};
-
-enum sys_state {
-	SYS_STATE_S0I0,
-	SYS_STATE_S0I1,
-	SYS_STATE_S0I2,
-	SYS_STATE_S0I3,
-	SYS_STATE_S3,
-	SYS_STATE_S5
-};
-
-#define SET_CFG_CMD	1
-
-enum int_status {
-	INT_SPURIOUS = 0,
-	INT_CMD_DONE = 1,
-	INT_CMD_ERR = 2,
-	INT_WAKE_RX = 3,
-	INT_SS_ERROR = 4,
-	INT_S0IX_MISS = 5,
-	INT_NO_ACKC6 = 6,
-	INT_INVALID = 7,
-};
-
-/* PMU register interface */
-static struct mrst_pmu_reg {
-	u32 pm_sts;		/* 0x00 */
-	u32 pm_cmd;		/* 0x04 */
-	u32 pm_ics;		/* 0x08 */
-	u32 _resv1;		/* 0x0C */
-	u32 pm_wkc[2];		/* 0x10 */
-	u32 pm_wks[2];		/* 0x18 */
-	u32 pm_ssc[4];		/* 0x20 */
-	u32 pm_sss[4];		/* 0x30 */
-	u32 pm_wssc[4];		/* 0x40 */
-	u32 pm_c3c4;		/* 0x50 */
-	u32 pm_c5c6;		/* 0x54 */
-	u32 pm_msi_disable;	/* 0x58 */
-} *pmu_reg;
-
-static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
-static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
-static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
-static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
-
-static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
-static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
-static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
-static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
-static inline void pmu_write_wssc(u32 arg)
-					{ writel(arg, &pmu_reg->pm_wssc[0]); }
-
-static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
-static inline u32 pmu_msi_is_disabled(void)
-				{ return readl(&pmu_reg->pm_msi_disable); }
-
-union pmu_pm_ics {
-	struct {
-		u32 cause:8;
-		u32 enable:1;
-		u32 pending:1;
-		u32 reserved:22;
-	} bits;
-	u32 value;
-};
-
-static inline void pmu_irq_enable(void)
-{
-	union pmu_pm_ics pmu_ics;
-
-	pmu_ics.value = pmu_read_ics();
-	pmu_ics.bits.enable = 1;
-	pmu_write_ics(pmu_ics.value);
-}
-
-union pmu_pm_status {
-	struct {
-		u32 pmu_rev:8;
-		u32 pmu_busy:1;
-		u32 mode_id:4;
-		u32 Reserved:19;
-	} pmu_status_parts;
-	u32 pmu_status_value;
-};
-
-static inline int pmu_read_busy_status(void)
-{
-	union pmu_pm_status result;
-
-	result.pmu_status_value = pmu_read_sts();
-
-	return result.pmu_status_parts.pmu_busy;
-}
-
-/* pmu set config parameters */
-struct cfg_delay_param_t {
-	u32 cmd:8;
-	u32 ioc:1;
-	u32 cfg_mode:4;
-	u32 mode_id:3;
-	u32 sys_state:3;
-	u32 cfg_delay:8;
-	u32 rsvd:5;
-};
-
-struct cfg_trig_param_t {
-	u32 cmd:8;
-	u32 ioc:1;
-	u32 cfg_mode:4;
-	u32 mode_id:3;
-	u32 sys_state:3;
-	u32 cfg_trig_type:3;
-	u32 cfg_trig_val:8;
-	u32 cmbi:1;
-	u32 rsvd1:1;
-};
-
-union pmu_pm_set_cfg_cmd_t {
-	union {
-		struct cfg_delay_param_t d_param;
-		struct cfg_trig_param_t t_param;
-	} pmu2_params;
-	u32 pmu_pm_set_cfg_cmd_value;
-};
-
-#ifdef FUTURE_PATCH
-extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
-#else
-static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
-#endif
-#endif
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index 2b235b77d9ab..23e5b9d7977b 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -23,7 +23,66 @@
 #define XO15_SCI_CLASS			DRV_NAME
 #define XO15_SCI_DEVICE_NAME		"OLPC XO-1.5 SCI"
 
-static unsigned long xo15_sci_gpe;
+static unsigned long			xo15_sci_gpe;
+static bool				lid_wake_on_close;
+
+/*
+ * The normal ACPI LID wakeup behavior is wake-on-open, but not
+ * wake-on-close. This is implemented as standard by the XO-1.5 DSDT.
+ *
+ * We provide here a sysfs attribute that will additionally enable
+ * wake-on-close behavior. This is useful (e.g.) when we oportunistically
+ * suspend with the display running; if the lid is then closed, we want to
+ * wake up to turn the display off.
+ *
+ * This is controlled through a custom method in the XO-1.5 DSDT.
+ */
+static int set_lid_wake_behavior(bool wake_on_close)
+{
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status;
+
+	arg_list.count		= 1;
+	arg_list.pointer	= &arg;
+	arg.type		= ACPI_TYPE_INTEGER;
+	arg.integer.value	= wake_on_close;
+
+	status = acpi_evaluate_object(NULL, "\\_SB.PCI0.LID.LIDW", &arg_list, NULL);
+	if (ACPI_FAILURE(status)) {
+		pr_warning(PFX "failed to set lid behavior\n");
+		return 1;
+	}
+
+	lid_wake_on_close = wake_on_close;
+
+	return 0;
+}
+
+static ssize_t
+lid_wake_on_close_show(struct kobject *s, struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", lid_wake_on_close);
+}
+
+static ssize_t lid_wake_on_close_store(struct kobject *s,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t n)
+{
+	unsigned int val;
+
+	if (sscanf(buf, "%u", &val) != 1)
+		return -EINVAL;
+
+	set_lid_wake_behavior(!!val);
+
+	return n;
+}
+
+static struct kobj_attribute lid_wake_on_close_attr =
+	__ATTR(lid_wake_on_close, 0644,
+	       lid_wake_on_close_show,
+	       lid_wake_on_close_store);
 
 static void battery_status_changed(void)
 {
@@ -91,6 +150,7 @@ static int xo15_sci_add(struct acpi_device *device)
 {
 	unsigned long long tmp;
 	acpi_status status;
+	int r;
 
 	if (!device)
 		return -EINVAL;
@@ -112,6 +172,10 @@ static int xo15_sci_add(struct acpi_device *device)
 
 	dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe);
 
+	r = sysfs_create_file(&device->dev.kobj, &lid_wake_on_close_attr.attr);
+	if (r)
+		goto err_sysfs;
+
 	/* Flush queue, and enable all SCI events */
 	process_sci_queue();
 	olpc_ec_mask_write(EC_SCI_SRC_ALL);
@@ -123,6 +187,11 @@ static int xo15_sci_add(struct acpi_device *device)
 		device_init_wakeup(&device->dev, true);
 
 	return 0;
+
+err_sysfs:
+	acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
+	cancel_work_sync(&sci_work);
+	return r;
 }
 
 static int xo15_sci_remove(struct acpi_device *device, int type)
@@ -130,6 +199,7 @@ static int xo15_sci_remove(struct acpi_device *device, int type)
 	acpi_disable_gpe(NULL, xo15_sci_gpe);
 	acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
 	cancel_work_sync(&sci_work);
+	sysfs_remove_file(&device->dev.kobj, &lid_wake_on_close_attr.attr);
 	return 0;
 }