Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...

15 files changed, 77 insertions, 84 deletions

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index c220dc3c4e0f..243e35f7a56c 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -521,7 +521,7 @@
 			ranges = <0x0 0x100000 0x8000>;
 
 			mac_sw: switch@0 {
-				compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+				compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
 				reg = <0x0 0x4000>;
 				ranges = <0 0 0x4000>;
 				clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index b69c7d40f5d8..2f326151116b 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -32,8 +32,8 @@
 				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "int0", "int1";
-				clocks = <&mcan_clk>, <&l3_iclk_div>;
-				clock-names = "cclk", "hclk";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
 				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 			};
 		};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3ee7bdff86b2..3f62a0c9450d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,7 +7,6 @@ config ARCH_OMAP2
 	depends on ARCH_MULTI_V6
 	select ARCH_OMAP2PLUS
 	select CPU_V6
-	select PM_GENERIC_DOMAINS if PM
 	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
@@ -106,6 +105,8 @@ config ARCH_OMAP2PLUS
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM
 	select RESET_CONTROLLER
 	select SOC_BUS
 	select TI_SYSC
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index a92d277f81a0..c8d317fafe2e 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -175,8 +175,11 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		if (mpuss_can_lose_context) {
 			error = cpu_cluster_pm_enter();
 			if (error) {
-				omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
-				goto cpu_cluster_pm_out;
+				index = 0;
+				cx = state_ptr + index;
+				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				mpuss_can_lose_context = 0;
 			}
 		}
 	}
@@ -184,7 +187,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
 	cpu_done[dev->cpu] = true;
 
-cpu_cluster_pm_out:
 	/* Wakeup CPU1 only if it is not offlined */
 	if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
 
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
index 55259f973b5a..aef8f2b00778 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -5,20 +5,20 @@
 	usb {
 		compatible = "simple-bus";
 		dma-ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x68500000 0x00400000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
 
 		usbphy0: usb-phy@0 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00000000 0x100>;
+			reg = <0x0 0x00000000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		xhci0: usb@1000 {
 			compatible = "generic-xhci";
-			reg = <0x00001000 0x1000>;
+			reg = <0x0 0x00001000 0x0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 1>, <&usbphy0 0>;
 			phy-names = "phy0", "phy1";
@@ -28,7 +28,7 @@
 
 		bdc0: usb@2000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00002000 0x1000>;
+			reg = <0x0 0x00002000 0x0 0x1000>;
 			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 0>, <&usbphy0 1>;
 			phy-names = "phy0", "phy1";
@@ -38,21 +38,21 @@
 
 		usbphy1: usb-phy@10000 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00010000 0x100>;
+			reg = <0x0 0x00010000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		usbphy2: usb-phy@20000 {
 			compatible = "brcm,sr-usb-hs-phy";
-			reg = <0x00020000 0x100>;
+			reg = <0x0 0x00020000 0x0 0x100>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
 
 		xhci1: usb@11000 {
 			compatible = "generic-xhci";
-			reg = <0x00011000 0x1000>;
+			reg = <0x0 0x00011000 0x0 0x1000>;
 			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
 			phy-names = "phy0", "phy1", "phy2";
@@ -62,7 +62,7 @@
 
 		bdc1: usb@21000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00021000 0x1000>;
+			reg = <0x0 0x00021000 0x0 0x1000>;
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy2>;
 			phy-names = "phy0";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 381a84912ba8..c28d51cc5797 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -10,18 +10,6 @@
 	model = "NVIDIA Jetson TX2 Developer Kit";
 	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
 
-	aconnect {
-		status = "okay";
-
-		dma-controller@2930000 {
-			status = "okay";
-		};
-
-		interrupt-controller@2a40000 {
-			status = "okay";
-		};
-	};
-
 	i2c@3160000 {
 		power-monitor@42 {
 			compatible = "ti,ina3221";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
index a2893be80507..0dc8304a2edd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -54,7 +54,7 @@
 			status = "okay";
 		};
 
-		serial@c280000 {
+		serial@3100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index e9c90f0f44ff..93438d2b9469 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1161,7 +1161,7 @@
 
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
-			reg = <0x0c150000 0xa0000>;
+			reg = <0x0c150000 0x90000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index e18e1a9a3011..a9caaf7c0d67 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1663,16 +1663,6 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb_vbus_otg: regulator@11 {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_VBUS_EN0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
 	vdd_hdmi: regulator@10 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_HDMI_5V0";
@@ -1712,4 +1702,14 @@
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 	};
+
+	vdd_usb_vbus_otg: regulator@14 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
index f6e6a24829af..b5d9a5526272 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -8,7 +8,7 @@
 	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
 
 	aliases {
-		sdhci3 = "/cbb@0/sdhci@3460000";
+		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &uarta;
 	};
 
@@ -17,12 +17,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cbb@0 {
+	bus@0 {
 		serial@3100000 {
 			status = "okay";
 		};
 
-		sdhci@3460000 {
+		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
 			non-removable;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a94dac76bf3f..59e0cbfa2214 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -179,22 +179,22 @@
 	};
 
 	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x0 0xffffffff>;
 		dma-ranges;
 		compatible = "simple-bus";
 
 		prng: qrng@e1000 {
 			compatible = "qcom,prng-ee";
-			reg = <0xe3000 0x1000>;
+			reg = <0x0 0xe3000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
 		cryptobam: dma@704000 {
 			compatible = "qcom,bam-v1.7.0";
-			reg = <0x00704000 0x20000>;
+			reg = <0x0 0x00704000 0x0 0x20000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "bam_clk";
@@ -206,7 +206,7 @@
 
 		crypto: crypto@73a000 {
 			compatible = "qcom,crypto-v5.1";
-			reg = <0x0073a000 0x6000>;
+			reg = <0x0 0x0073a000 0x0 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 				<&gcc GCC_CRYPTO_AXI_CLK>,
 				<&gcc GCC_CRYPTO_CLK>;
@@ -217,7 +217,7 @@
 
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq6018-pinctrl";
-			reg = <0x01000000 0x300000>;
+			reg = <0x0 0x01000000 0x0 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -235,7 +235,7 @@
 
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq6018";
-			reg = <0x01800000 0x80000>;
+			reg = <0x0 0x01800000 0x0 0x80000>;
 			clocks = <&xo>, <&sleep_clk>;
 			clock-names = "xo", "sleep_clk";
 			#clock-cells = <1>;
@@ -244,17 +244,17 @@
 
 		tcsr_mutex_regs: syscon@1905000 {
 			compatible = "syscon";
-			reg = <0x01905000 0x8000>;
+			reg = <0x0 0x01905000 0x0 0x8000>;
 		};
 
 		tcsr_q6: syscon@1945000 {
 			compatible = "syscon";
-			reg = <0x01945000 0xe000>;
+			reg = <0x0 0x01945000 0x0 0xe000>;
 		};
 
 		blsp_dma: dma@7884000 {
 			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07884000 0x2b000>;
+			reg = <0x0 0x07884000 0x0 0x2b000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "bam_clk";
@@ -264,7 +264,7 @@
 
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078b1000 0x200>;
+			reg = <0x0 0x078b1000 0x0 0x200>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
@@ -276,7 +276,7 @@
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x078b5000 0x600>;
+			reg = <0x0 0x078b5000 0x0 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
@@ -291,7 +291,7 @@
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x078b6000 0x600>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
@@ -306,7 +306,7 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x078b6000 0x600>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
@@ -321,7 +321,7 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x078b7000 0x600>;
+			reg = <0x0 0x078b7000 0x0 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
@@ -336,24 +336,24 @@
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
-			reg =   <0x0b000000 0x1000>,  /*GICD*/
-				<0x0b002000 0x1000>,  /*GICC*/
-				<0x0b001000 0x1000>,  /*GICH*/
-				<0x0b004000 0x1000>;  /*GICV*/
+			reg =   <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+				<0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+				<0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+				<0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		watchdog@b017000 {
 			compatible = "qcom,kpss-wdt";
 			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
-			reg = <0x0b017000 0x40>;
+			reg = <0x0 0x0b017000 0x0 0x40>;
 			clocks = <&sleep_clk>;
 			timeout-sec = <10>;
 		};
 
 		apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq6018-apcs-apps-global";
-			reg = <0x0b111000 0x1000>;
+			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
 			clocks = <&a53pll>, <&xo>;
 			clock-names = "pll", "xo";
@@ -362,7 +362,7 @@
 
 		a53pll: clock@b116000 {
 			compatible = "qcom,ipq6018-a53pll";
-			reg = <0x0b116000 0x40>;
+			reg = <0x0 0x0b116000 0x0 0x40>;
 			#clock-cells = <0>;
 			clocks = <&xo>;
 			clock-names = "xo";
@@ -377,68 +377,68 @@
 		};
 
 		timer@b120000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 			ranges;
 			compatible = "arm,armv7-timer-mem";
-			reg = <0x0b120000 0x1000>;
+			reg = <0x0 0x0b120000 0x0 0x1000>;
 			clock-frequency = <19200000>;
 
 			frame@b120000 {
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b121000 0x1000>,
-				      <0x0b122000 0x1000>;
+				reg = <0x0 0x0b121000 0x0 0x1000>,
+				      <0x0 0x0b122000 0x0 0x1000>;
 			};
 
 			frame@b123000 {
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb123000 0x1000>;
+				reg = <0x0 0xb123000 0x0 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b124000 {
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b124000 0x1000>;
+				reg = <0x0 0x0b124000 0x0 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b125000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b125000 0x1000>;
+				reg = <0x0 0x0b125000 0x0 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b126000 {
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b126000 0x1000>;
+				reg = <0x0 0x0b126000 0x0 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b127000 {
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b127000 0x1000>;
+				reg = <0x0 0x0b127000 0x0 0x1000>;
 				status = "disabled";
 			};
 
 			frame@b128000 {
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b128000 0x1000>;
+				reg = <0x0 0x0b128000 0x0 0x1000>;
 				status = "disabled";
 			};
 		};
 
 		q6v5_wcss: remoteproc@cd00000 {
 			compatible = "qcom,ipq8074-wcss-pil";
-			reg = <0x0cd00000 0x4040>,
-				<0x004ab000 0x20>;
+			reg = <0x0 0x0cd00000 0x0 0x4040>,
+			      <0x0 0x004ab000 0x0 0x20>;
 			reg-names = "qdsp6",
 				    "rmb";
 			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 35bd6b904b9c..337681038519 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -243,7 +243,6 @@
 		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int>;
-		rockchip,system-power-controller;
 		wakeup-source;
 		#clock-cells = <1>;
 		clock-output-names = "rk808-clkout1", "xin32k";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index be7a31d81632..2ee07d15a6e3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -20,7 +20,7 @@
 	gmac_clk: gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
-		clock-output-names = "gmac_clk";
+		clock-output-names = "gmac_clkin";
 		#clock-cells = <0>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index e7a459fa4322..20309076dbac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -74,14 +74,14 @@
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc1";
+			linux,default-trigger = "mmc2";
 		};
 
 		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc0";
+			linux,default-trigger = "mmc1";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index ada724b12f01..7a9a7aca86c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -29,6 +29,9 @@
 		i2c6 = &i2c6;
 		i2c7 = &i2c7;
 		i2c8 = &i2c8;
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;