Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
author: Linus Torvalds 2013-04-30 15:21:02 -0700
committer: Linus Torvalds 2013-04-30 15:21:02 -0700
commit: 3ed1c478eff8db80e234d5446cb378b503135888 (patch)
tree: e1c8e0f488ca49c49b5a31fe59add4254381dd4b /arch
parent: 151173e8ce9b95bbbbd7eedb9035cfaffbdb7cb2 (diff)
parent: 371deb9500831ad1afbf9ea00e373f650deaed2f (diff)
100 files changed, 250 insertions, 5881 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a39e3214ea3d..006f9838dd43 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2163,7 +2163,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2173,30 +2172,6 @@ config CPU_FREQ_IMX
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 13482ea58b09..93f3794ba5cb 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -56,7 +56,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_KIRKWOOD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 0c6381516a5a..48f1228c611c 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -27,8 +27,6 @@
 
 #define AT91_MAX_STATES	2
 
-static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
-
 /* Actual code that puts the SoC in different idle states */
 static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
@@ -47,7 +45,6 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver at91_idle_driver = {
 	.name			= "at91_idle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
 	.states[1]		= {
 		.enter			= at91_enter_idle,
@@ -61,20 +58,9 @@ static struct cpuidle_driver at91_idle_driver = {
 };
 
 /* Initialize CPU idle by registering the idle states */
-static int at91_init_cpuidle(void)
+static int __init at91_init_cpuidle(void)
 {
-	struct cpuidle_device *device;
-
-	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
-	device->state_count = AT91_MAX_STATES;
-
-	cpuidle_register_driver(&at91_idle_driver);
-
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
-		return -EIO;
-	}
-	return 0;
+	return cpuidle_register(&at91_idle_driver, NULL);
 }
 
 device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa98a63..dd1ffccc75e9 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
deleted file mode 100644
index 4729eaab0f40..000000000000
--- a/arch/arm/mach-davinci/cpufreq.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * CPU frequency scaling for DaVinci
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
- *
- *  Copyright (C) 2005 Nokia Corporation
- *  Written by Tony Lindgren <tony@atomide.com>
- *
- *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Updated to support OMAP3
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/cpufreq.h>
-#include <mach/common.h>
-
-#include "clock.h"
-
-struct davinci_cpufreq {
-	struct device *dev;
-	struct clk *armclk;
-	struct clk *asyncclk;
-	unsigned long asyncrate;
-};
-static struct davinci_cpufreq cpufreq;
-
-static int davinci_verify_speed(struct cpufreq_policy *policy)
-{
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-	struct clk *armclk = cpufreq.armclk;
-
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
-	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-						policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
-static int davinci_target(struct cpufreq_policy *policy,
-				unsigned int target_freq, unsigned int relation)
-{
-	int ret = 0;
-	unsigned int idx;
-	struct cpufreq_freqs freqs;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct clk *armclk = cpufreq.armclk;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	freqs.old = davinci_getspeed(0);
-	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
-	freqs.cpu = 0;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
-						freqs.new, relation, &idx);
-	if (ret)
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
-		ret = pdata->set_voltage(idx);
-		if (ret)
-			goto out;
-	}
-
-	ret = clk_set_rate(armclk, idx);
-	if (ret)
-		goto out;
-
-	if (cpufreq.asyncclk) {
-		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
-		if (ret)
-			goto out;
-	}
-
-	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
-		pdata->set_voltage(idx);
-
-out:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int davinci_cpu_init(struct cpufreq_policy *policy)
-{
-	int result = 0;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Finish platform specific initialization */
-	if (pdata->init) {
-		result = pdata->init();
-		if (result)
-			return result;
-	}
-
-	policy->cur = policy->min = policy->max = davinci_getspeed(0);
-
-	if (freq_table) {
-		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		if (!result)
-			cpufreq_frequency_table_get_attr(freq_table,
-							policy->cpu);
-	} else {
-		policy->cpuinfo.min_freq = policy->min;
-		policy->cpuinfo.max_freq = policy->max;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = davinci_getspeed(0);
-
-	/*
-	 * Time measurement across the target() function yields ~1500-1800us
-	 * time taken with no drivers on notification list.
-	 * Setting the latency to 2000 us to accommodate addition of drivers
-	 * to pre/post change notification list.
-	 */
-	policy->cpuinfo.transition_latency = 2000 * 1000;
-	return 0;
-}
-
-static int davinci_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *davinci_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver davinci_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= davinci_verify_speed,
-	.target		= davinci_target,
-	.get		= davinci_getspeed,
-	.init		= davinci_cpu_init,
-	.exit		= davinci_cpu_exit,
-	.name		= "davinci",
-	.attr		= davinci_cpufreq_attr,
-};
-
-static int __init davinci_cpufreq_probe(struct platform_device *pdev)
-{
-	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
-	struct clk *asyncclk;
-
-	if (!pdata)
-		return -EINVAL;
-	if (!pdata->freq_table)
-		return -EINVAL;
-
-	cpufreq.dev = &pdev->dev;
-
-	cpufreq.armclk = clk_get(NULL, "arm");
-	if (IS_ERR(cpufreq.armclk)) {
-		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
-		return PTR_ERR(cpufreq.armclk);
-	}
-
-	asyncclk = clk_get(cpufreq.dev, "async");
-	if (!IS_ERR(asyncclk)) {
-		cpufreq.asyncclk = asyncclk;
-		cpufreq.asyncrate = clk_get_rate(asyncclk);
-	}
-
-	return cpufreq_register_driver(&davinci_driver);
-}
-
-static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
-{
-	clk_put(cpufreq.armclk);
-
-	if (cpufreq.asyncclk)
-		clk_put(cpufreq.asyncclk);
-
-	return cpufreq_unregister_driver(&davinci_driver);
-}
-
-static struct platform_driver davinci_cpufreq_driver = {
-	.driver = {
-		.name	 = "cpufreq-davinci",
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(davinci_cpufreq_remove),
-};
-
-int __init davinci_cpufreq_init(void)
-{
-	return platform_driver_probe(&davinci_cpufreq_driver,
-							davinci_cpufreq_probe);
-}
-
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 5ac9e9384b15..36aef3a7dedb 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -25,7 +25,6 @@
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
-static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
 static void __iomem *ddr2_reg_base;
 static bool ddr2_pdown;
 
@@ -50,14 +49,10 @@ static void davinci_save_ddr_power(int enter, bool pdown)
 
 /* Actual code that puts the SoC in different idle states */
 static int davinci_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-						int index)
+			      struct cpuidle_driver *drv, int index)
 {
 	davinci_save_ddr_power(1, ddr2_pdown);
-
-	index = cpuidle_wrap_enter(dev,	drv, index,
-				arm_cpuidle_simple_enter);
-
+	cpu_do_idle();
 	davinci_save_ddr_power(0, ddr2_pdown);
 
 	return index;
@@ -66,7 +61,6 @@ static int davinci_enter_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver davinci_idle_driver = {
 	.name			= "cpuidle-davinci",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
 	.states[1]		= {
 		.enter			= davinci_enter_idle,
@@ -81,12 +75,8 @@ static struct cpuidle_driver davinci_idle_driver = {
 
 static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 {
-	int ret;
-	struct cpuidle_device *device;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
 
-	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
-
 	if (!pdata) {
 		dev_err(&pdev->dev, "cannot get platform data\n");
 		return -ENOENT;
@@ -96,20 +86,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 
 	ddr2_pdown = pdata->ddr2_pdown;
 
-	ret = cpuidle_register_driver(&davinci_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register driver\n");
-		return ret;
-	}
-
-	ret = cpuidle_register_device(device);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register device\n");
-		cpuidle_unregister_driver(&davinci_idle_driver);
-		return ret;
-	}
-
-	return 0;
+	return cpuidle_register(&davinci_idle_driver, NULL);
 }
 
 static struct platform_driver davinci_cpuidle_driver = {
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 70f94c87479d..d5dde0727339 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -72,10 +72,12 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_OPP
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
 	select PINCTRL
 	select PINCTRL_EXYNOS5440
+	select PM_OPP
 	help
 	  Enable EXYNOS5440 SoC support
 
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index fcfe0251aa3e..498a7a23e260 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -58,7 +58,6 @@ static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
 static struct cpuidle_driver exynos4_idle_driver = {
 	.name			= "exynos4_idle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 };
 
 /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index c4ce0906d76a..cb70961b6239 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -30,7 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
-obj-y += cpuidle.o
+obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 endif
 
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index d8c75c3c925d..387dc4cceca2 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -87,13 +87,12 @@ static int mxc_set_target(struct cpufreq_policy *policy,
 
 	freqs.old = clk_get_rate(cpu_clk) / 1000;
 	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
 	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	ret = set_cpu_freq(freq_Hz);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
 }
@@ -145,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy)
 	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
 
 	/* Manual states, that PLL stabilizes in two CLK32 periods */
 	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
 	if (ret < 0) {
 		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
 		       __func__, ret);
diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c
new file mode 100644
index 000000000000..5a47e3c6172f
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle-imx5.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index)
+{
+	arm_pm_idle();
+	return index;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+	.name             = "imx5_cpuidle",
+	.owner            = THIS_MODULE,
+	.states[0] = {
+		.enter            = imx5_cpuidle_enter,
+		.exit_latency     = 2,
+		.target_residency = 1,
+		.flags            = CPUIDLE_FLAG_TIME_VALID,
+		.name             = "IMX5 SRPG",
+		.desc             = "CPU state retained,powered off",
+	},
+	.state_count = 1,
+};
+
+int __init imx5_cpuidle_init(void)
+{
+	return cpuidle_register(&imx5_cpuidle_driver, NULL);
+}
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index d533e2695f0e..23ddfb693b2d 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -6,7 +6,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clockchips.h>
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/cpuidle.h>
@@ -21,10 +20,6 @@ static DEFINE_SPINLOCK(master_lock);
 static int imx6q_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	int cpu = dev->cpu;
-
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
-
 	if (atomic_inc_return(&master) == num_online_cpus()) {
 		/*
 		 * With this lock, we prevent other cpu to exit and enter
@@ -43,26 +38,13 @@ idle:
 	cpu_do_idle();
 done:
 	atomic_dec(&master);
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 
 	return index;
 }
 
-/*
- * For each cpu, setup the broadcast timer because local timer
- * stops for the states other than WFI.
- */
-static void imx6q_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
 static struct cpuidle_driver imx6q_cpuidle_driver = {
 	.name = "imx6q_cpuidle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		/* WFI */
 		ARM_CPUIDLE_WFI_STATE,
@@ -70,7 +52,8 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 		{
 			.exit_latency = 50,
 			.target_residency = 75,
-			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+			         CPUIDLE_FLAG_TIMER_STOP,
 			.enter = imx6q_enter_wait,
 			.name = "WAIT",
 			.desc = "Clock off",
@@ -88,8 +71,5 @@ int __init imx6q_cpuidle_init(void)
 	/* Set chicken bit to get a reliable WAIT mode support */
 	imx6q_set_chicken_bit();
 
-	/* Configure the broadcast timer on each cpu */
-	on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1);
-
-	return imx_cpuidle_init(&imx6q_cpuidle_driver);
+	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }
diff --git a/arch/arm/mach-imx/cpuidle.c b/arch/arm/mach-imx/cpuidle.c
deleted file mode 100644
index d4cb511a44a8..000000000000
--- a/arch/arm/mach-imx/cpuidle.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/cpuidle.h>
-#include <linux/err.h>
-#include <linux/hrtimer.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-static struct cpuidle_device __percpu * imx_cpuidle_devices;
-
-static void __init imx_cpuidle_devices_uninit(void)
-{
-	int cpu_id;
-	struct cpuidle_device *dev;
-
-	for_each_possible_cpu(cpu_id) {
-		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
-		cpuidle_unregister_device(dev);
-	}
-
-	free_percpu(imx_cpuidle_devices);
-}
-
-int __init imx_cpuidle_init(struct cpuidle_driver *drv)
-{
-	struct cpuidle_device *dev;
-	int cpu_id, ret;
-
-	if (drv->state_count > CPUIDLE_STATE_MAX) {
-		pr_err("%s: state_count exceeds maximum\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = cpuidle_register_driver(drv);
-	if (ret) {
-		pr_err("%s: Failed to register cpuidle driver with error: %d\n",
-			 __func__, ret);
-		return ret;
-	}
-
-	imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
-	if (imx_cpuidle_devices == NULL) {
-		ret = -ENOMEM;
-		goto unregister_drv;
-	}
-
-	/* initialize state data for each cpuidle_device */
-	for_each_possible_cpu(cpu_id) {
-		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
-		dev->cpu = cpu_id;
-		dev->state_count = drv->state_count;
-
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("%s: Failed to register cpu %u, error: %d\n",
-				__func__, cpu_id, ret);
-			goto uninit;
-		}
-	}
-
-	return 0;
-
-uninit:
-	imx_cpuidle_devices_uninit();
-
-unregister_drv:
-	cpuidle_unregister_driver(drv);
-	return ret;
-}
diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index e092d1359d94..786f98ecc145 100644
--- a/arch/arm/mach-imx/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
@@ -10,18 +10,16 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/cpuidle.h>
-
 #ifdef CONFIG_CPU_IDLE
-extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
 #else
-static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+static inline int imx5_cpuidle_init(void)
 {
-	return -ENODEV;
+	return 0;
 }
 static inline int imx6q_cpuidle_init(void)
 {
-	return -ENODEV;
+	return 0;
 }
 #endif
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index f67fd7ee8127..82e79c658eb2 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -149,33 +149,6 @@ static void imx5_pm_idle(void)
 	imx5_cpu_do_idle();
 }
 
-static int imx5_cpuidle_enter(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int idx)
-{
-	int ret;
-
-	ret = imx5_cpu_do_idle();
-	if (ret < 0)
-		return ret;
-
-	return idx;
-}
-
-static struct cpuidle_driver imx5_cpuidle_driver = {
-	.name			= "imx5_cpuidle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]	= {
-		.enter			= imx5_cpuidle_enter,
-		.exit_latency		= 2,
-		.target_residency	= 1,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IMX5 SRPG",
-		.desc			= "CPU state retained,powered off",
-	},
-	.state_count		= 1,
-};
-
 static int __init imx5_pm_common_init(void)
 {
 	int ret;
@@ -193,8 +166,7 @@ static int __init imx5_pm_common_init(void)
 	/* Set the registers to the default cpu idle state. */
 	mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
 
-	imx_cpuidle_init(&imx5_cpuidle_driver);
-	return 0;
+	return imx5_cpuidle_init();
 }
 
 void __init imx51_pm_init(void)
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 5521d18bf19a..d14d6b76f4c2 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
deleted file mode 100644
index 590c192cdf4d..000000000000
--- a/arch/arm/mach-integrator/cpu.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/cpu.c
- *
- *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * CPU support functions
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-static struct cpufreq_driver integrator_driver;
-
-#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
-#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
-#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
-#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
-
-static const struct icst_params lclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 8,
-	.vd_max		= 132,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static const struct icst_params cclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 160,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-/*
- * Validate the speed policy.
- */
-static int integrator_verify_policy(struct cpufreq_policy *policy)
-{
-	struct icst_vco vco;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-	policy->max = icst_hz(&cclk_params, vco) / 1000;
-
-	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-	policy->min = icst_hz(&cclk_params, vco) / 1000;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-
-static int integrator_set_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
-{
-	cpumask_t cpus_allowed;
-	int cpu = policy->cpu;
-	struct icst_vco vco;
-	struct cpufreq_freqs freqs;
-	u_int cm_osc;
-
-	/*
-	 * Save this threads cpus_allowed mask.
-	 */
-	cpus_allowed = current->cpus_allowed;
-
-	/*
-	 * Bind to the specified CPU.  When this call returns,
-	 * we should be running on the right CPU.
-	 */
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* get current setting */
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		vco.s = (cm_osc >> 8) & 7;
-	} else if (machine_is_cintegrator()) {
-		vco.s = 1;
-	}
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-	freqs.old = icst_hz(&cclk_params, vco) / 1000;
-
-	/* icst_hz_to_vco rounds down -- so we need the next
-	 * larger freq in case of CPUFREQ_RELATION_L.
-	 */
-	if (relation == CPUFREQ_RELATION_L)
-		target_freq += 999;
-	if (target_freq > policy->max)
-		target_freq = policy->max;
-	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
-	freqs.new = icst_hz(&cclk_params, vco) / 1000;
-
-	freqs.cpu = policy->cpu;
-
-	if (freqs.old == freqs.new) {
-		set_cpus_allowed(current, cpus_allowed);
-		return 0;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		cm_osc &= 0xfffff800;
-		cm_osc |= vco.s << 8;
-	} else if (machine_is_cintegrator()) {
-		cm_osc &= 0xffffff00;
-	}
-	cm_osc |= vco.v;
-
-	__raw_writel(0xa05f, CM_LOCK);
-	__raw_writel(cm_osc, CM_OSC);
-	__raw_writel(0, CM_LOCK);
-
-	/*
-	 * Restore the CPUs allowed mask.
-	 */
-	set_cpus_allowed(current, cpus_allowed);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static unsigned int integrator_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned int current_freq;
-	u_int cm_osc;
-	struct icst_vco vco;
-
-	cpus_allowed = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* detect memory etc. */
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		vco.s = (cm_osc >> 8) & 7;
-	} else {
-		vco.s = 1;
-	}
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-
-	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
-
-	set_cpus_allowed(current, cpus_allowed);
-
-	return current_freq;
-}
-
-static int integrator_cpufreq_init(struct cpufreq_policy *policy)
-{
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.max_freq = 160000;
-	policy->cpuinfo.min_freq = 12000;
-	policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
-	policy->cur = policy->min = policy->max = integrator_get(policy->cpu);
-
-	return 0;
-}
-
-static struct cpufreq_driver integrator_driver = {
-	.verify		= integrator_verify_policy,
-	.target		= integrator_set_target,
-	.get		= integrator_get,
-	.init		= integrator_cpufreq_init,
-	.name		= "integrator",
-};
-
-static int __init integrator_cpu_init(void)
-{
-	return cpufreq_register_driver(&integrator_driver);
-}
-
-static void __exit integrator_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&integrator_driver);
-}
-
-MODULE_AUTHOR ("Russell M. King");
-MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
-MODULE_LICENSE ("GPL");
-
-module_init(integrator_cpu_init);
-module_exit(integrator_cpu_exit);
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d6ba13e1c540..14522d077c88 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -249,7 +249,6 @@ extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_finish_suspend(unsigned long cpu_state);
 extern void omap4_cpu_resume(void);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_mpuss_read_prev_context_state(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)
@@ -277,10 +276,6 @@ static inline int omap4_finish_suspend(unsigned long cpu_state)
 static inline void omap4_cpu_resume(void)
 {}
 
-static inline u32 omap4_mpuss_read_prev_context_state(void)
-{
-	return 0;
-}
 #endif
 
 struct omap_sdrc_params;
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 80392fca86c6..cca045c95fbf 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -26,6 +26,7 @@
 #include <linux/cpuidle.h>
 #include <linux/export.h>
 #include <linux/cpu_pm.h>
+#include <asm/cpuidle.h>
 
 #include "powerdomain.h"
 #include "clockdomain.h"
@@ -99,11 +100,15 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
 	},
 };
 
-/* Private functions */
-
-static int __omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
+/**
+ * omap3_enter_idle - Programs OMAP3 to enter the specified state
+ * @dev: cpuidle device
+ * @drv: cpuidle driver
+ * @index: the index of state to be entered
+ */
+static int omap3_enter_idle(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv,
+			    int index)
 {
 	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
 
@@ -149,22 +154,6 @@ return_sleep_time:
 }
 
 /**
- * omap3_enter_idle - Programs OMAP3 to enter the specified state
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: the index of state to be entered
- *
- * Called from the CPUidle framework to program the device to the
- * specified target state selected by the governor.
- */
-static inline int omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle);
-}
-
-/**
  * next_valid_state - Find next valid C-state
  * @dev: cpuidle device
  * @drv: cpuidle driver
@@ -271,11 +260,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	return ret;
 }
 
-static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
-
 static struct cpuidle_driver omap3_idle_driver = {
-	.name =		"omap3_idle",
-	.owner =	THIS_MODULE,
+	.name             = "omap3_idle",
+	.owner            = THIS_MODULE,
 	.states = {
 		{
 			.enter		  = omap3_enter_idle_bm,
@@ -348,8 +335,6 @@ static struct cpuidle_driver omap3_idle_driver = {
  */
 int __init omap3_idle_init(void)
 {
-	struct cpuidle_device *dev;
-
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
 	per_pd = pwrdm_lookup("per_pwrdm");
@@ -358,16 +343,5 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	cpuidle_register_driver(&omap3_idle_driver);
-
-	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
-	dev->cpu = 0;
-
-	if (cpuidle_register_device(dev)) {
-		printk(KERN_ERR "%s: CPUidle register device failed\n",
-		       __func__);
-		return -EIO;
-	}
-
-	return 0;
+	return cpuidle_register(&omap3_idle_driver, NULL);
 }
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index d639aef0deda..5a286b56205e 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -1,7 +1,7 @@
 /*
- * OMAP4 CPU idle Routines
+ * OMAP4+ CPU idle Routines
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2013 Texas Instruments, Inc.
  * Santosh Shilimkar <santosh.shilimkar@ti.com>
  * Rajendra Nayak <rnayak@ti.com>
  *
@@ -14,8 +14,8 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
-#include <linux/clockchips.h>
 
+#include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
 
 #include "common.h"
@@ -24,13 +24,13 @@
 #include "clockdomain.h"
 
 /* Machine specific information */
-struct omap4_idle_statedata {
+struct idle_statedata {
 	u32 cpu_state;
 	u32 mpu_logic_state;
 	u32 mpu_state;
 };
 
-static struct omap4_idle_statedata omap4_idle_data[] = {
+static struct idle_statedata omap4_idle_data[] = {
 	{
 		.cpu_state = PWRDM_POWER_ON,
 		.mpu_state = PWRDM_POWER_ON,
@@ -53,11 +53,12 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
 
 static atomic_t abort_barrier;
 static bool cpu_done[NR_CPUS];
+static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */
 
 /**
- * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
+ * omap_enter_idle_[simple/coupled] - OMAP4PLUS cpuidle entry functions
  * @dev: cpuidle device
  * @drv: cpuidle driver
  * @index: the index of state to be entered
@@ -66,7 +67,7 @@ static bool cpu_done[NR_CPUS];
  * specified low power state selected by the governor.
  * Returns the amount of time spent in the low power state.
  */
-static int omap4_enter_idle_simple(struct cpuidle_device *dev,
+static int omap_enter_idle_simple(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
@@ -77,12 +78,11 @@ static int omap4_enter_idle_simple(struct cpuidle_device *dev,
 	return index;
 }
 
-static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
+static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	struct omap4_idle_statedata *cx = &omap4_idle_data[index];
-	int cpu_id = smp_processor_id();
+	struct idle_statedata *cx = state_ptr + index;
 
 	local_fiq_disable();
 
@@ -109,8 +109,6 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 		}
 	}
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
-
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
@@ -149,11 +147,10 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if (omap4_mpuss_read_prev_context_state())
+	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
-
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
 	cpu_done[dev->cpu] = false;
@@ -163,49 +160,38 @@ fail:
 	return index;
 }
 
-/*
- * For each cpu, setup the broadcast timer because local timers
- * stops for the states above C1.
- */
-static void omap_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
-static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
-
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
-	.en_core_tk_irqen		= 1,
 	.states = {
 		{
 			/* C1 - CPU0 ON + CPU1 ON + MPU ON */
 			.exit_latency = 2 + 2,
 			.target_residency = 5,
 			.flags = CPUIDLE_FLAG_TIME_VALID,
-			.enter = omap4_enter_idle_simple,
+			.enter = omap_enter_idle_simple,
 			.name = "C1",
-			.desc = "MPUSS ON"
+			.desc = "CPUx ON, MPUSS ON"
 		},
 		{
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			.enter = omap4_enter_idle_coupled,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			         CPUIDLE_FLAG_TIMER_STOP,
+			.enter = omap_enter_idle_coupled,
 			.name = "C2",
-			.desc = "MPUSS CSWR",
+			.desc = "CPUx OFF, MPUSS CSWR",
 		},
 		{
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			.enter = omap4_enter_idle_coupled,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			         CPUIDLE_FLAG_TIMER_STOP,
+			.enter = omap_enter_idle_coupled,
 			.name = "C3",
-			.desc = "MPUSS OSWR",
+			.desc = "CPUx OFF, MPUSS OSWR",
 		},
 	},
 	.state_count = ARRAY_SIZE(omap4_idle_data),
@@ -215,16 +201,13 @@ static struct cpuidle_driver omap4_idle_driver = {
 /* Public functions */
 
 /**
- * omap4_idle_init - Init routine for OMAP4 idle
+ * omap4_idle_init - Init routine for OMAP4+ idle
  *
- * Registers the OMAP4 specific cpuidle driver to the cpuidle
+ * Registers the OMAP4+ specific cpuidle driver to the cpuidle
  * framework with the valid set of states.
  */
 int __init omap4_idle_init(void)
 {
-	struct cpuidle_device *dev;
-	unsigned int cpu_id = 0;
-
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm");
 	cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm");
@@ -236,22 +219,5 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
-	/* Configure the broadcast timer on each cpu */
-	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
-
-	for_each_cpu(cpu_id, cpu_online_mask) {
-		dev = &per_cpu(omap4_idle_dev, cpu_id);
-		dev->cpu = cpu_id;
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-		dev->coupled_cpus = *cpu_online_mask;
-#endif
-		cpuidle_register_driver(&omap4_idle_driver);
-
-		if (cpuidle_register_device(dev)) {
-			pr_err("%s: CPUidle register failed\n", __func__);
-			return -EIO;
-		}
-	}
-
-	return 0;
+	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
 }
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 8bcb64bcdcdb..e80327b6c81f 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -139,20 +139,6 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
 	}
 }
 
-/**
- * omap4_mpuss_read_prev_context_state:
- * Function returns the MPUSS previous context state
- */
-u32 omap4_mpuss_read_prev_context_state(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
-	return reg;
-}
-
 /*
  * Store the CPU cluster state for L2X0 low power operations.
  */
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index dec553349ae2..e742118fcfd2 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -264,6 +264,12 @@ static void __init omap4_init_voltages(void)
 	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
+static inline void omap_init_cpufreq(void)
+{
+	struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+	platform_device_register_full(&devinfo);
+}
+
 static int __init omap2_common_pm_init(void)
 {
 	if (!of_have_populated_dt())
@@ -293,6 +299,9 @@ int __init omap2_common_pm_late_init(void)
 
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
+
+		/* cpufreq dummy device instantiation */
+		omap_init_cpufreq();
 	}
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 12c500558387..648867a8caa8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -7,12 +7,6 @@ obj-y				+= clock.o devices.o generic.o irq.o \
 				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
-endif
-
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
deleted file mode 100644
index 6a7aeab42f6c..000000000000
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
- *  Copyright (C) 2002,2003 Intrinsyc Software
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * History:
- *   31-Jul-2002 : Initial version [FB]
- *   29-Jan-2003 : added PXA255 support [FB]
- *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
- *
- * Note:
- *   This driver may change the memory bus clock rate, but will not do any
- *   platform specific access timing changes... for example if you have flash
- *   memory connected to CS0, you will need to register a platform specific
- *   notifier which will adjust the memory access strobes to maintain a
- *   minimum strobe width.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/io.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
-
-#ifdef DEBUG
-static unsigned int freq_debug;
-module_param(freq_debug, uint, 0);
-MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-#else
-#define freq_debug  0
-#endif
-
-static struct regulator *vcc_core;
-
-static unsigned int pxa27x_maxfreq;
-module_param(pxa27x_maxfreq, uint, 0);
-MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
-		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
-
-typedef struct {
-	unsigned int khz;
-	unsigned int membus;
-	unsigned int cccr;
-	unsigned int div2;
-	unsigned int cclkcfg;
-	int vmin;
-	int vmax;
-} pxa_freqs_t;
-
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF	64	/* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO		0x1
-#define CCLKCFG_FCS		0x2
-#define CCLKCFG_HALFTURBO	0x4
-#define CCLKCFG_FASTBUS		0x8
-#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK		0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
-/*
- * PXA255 definitions
- */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
-
-static pxa_freqs_t pxa255_run_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
-};
-
-/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-static pxa_freqs_t pxa255_turbo_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
-};
-
-#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-
-static struct cpufreq_frequency_table
-	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
-static struct cpufreq_frequency_table
-	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
-
-static unsigned int pxa255_turbo_table;
-module_param(pxa255_turbo_table, uint, 0);
-MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
-
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency	= 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16	  oscillator to run mode ratio
- * 2N = 6	  2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1	  Fast bus mode
- * HT = 0	  Half-Turbo mode
- * T = 1	  Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
-  (CCLKCFG_FCS | \
-   ((B)  ? CCLKCFG_FASTBUS : 0) | \
-   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
-   ((T)  ? CCLKCFG_TURBO : 0))
-
-static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
-};
-
-#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
-static struct cpufreq_frequency_table
-	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
-
-extern unsigned get_clk_frequency_khz(int info);
-
-#ifdef CONFIG_REGULATOR
-
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	int ret = 0;
-	int vmin, vmax;
-
-	if (!cpu_is_pxa27x())
-		return 0;
-
-	vmin = pxa_freq->vmin;
-	vmax = pxa_freq->vmax;
-	if ((vmin == -1) || (vmax == -1))
-		return 0;
-
-	ret = regulator_set_voltage(vcc_core, vmin, vmax);
-	if (ret)
-		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
-		       vmin, vmax);
-	return ret;
-}
-
-static __init void pxa_cpufreq_init_voltages(void)
-{
-	vcc_core = regulator_get(NULL, "vcc_core");
-	if (IS_ERR(vcc_core)) {
-		pr_info("cpufreq: Didn't find vcc_core regulator\n");
-		vcc_core = NULL;
-	} else {
-		pr_info("cpufreq: Found vcc_core regulator\n");
-	}
-}
-#else
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	return 0;
-}
-
-static __init void pxa_cpufreq_init_voltages(void) { }
-#endif
-
-static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
-			     pxa_freqs_t **pxa_freqs)
-{
-	if (cpu_is_pxa25x()) {
-		if (!pxa255_turbo_table) {
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
-		} else {
-			*pxa_freqs = pxa255_turbo_freqs;
-			*freq_table = pxa255_turbo_freq_table;
-		}
-	}
-	if (cpu_is_pxa27x()) {
-		*pxa_freqs = pxa27x_freqs;
-		*freq_table = pxa27x_freq_table;
-	}
-}
-
-static void pxa27x_guess_max_freq(void)
-{
-	if (!pxa27x_maxfreq) {
-		pxa27x_maxfreq = 416000;
-		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
-		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
-		       pxa27x_maxfreq);
-	} else {
-		pxa27x_maxfreq *= 1000;
-	}
-}
-
-static void init_sdram_rows(void)
-{
-	uint32_t mdcnfg = __raw_readl(MDCNFG);
-	unsigned int drac2 = 0, drac0 = 0;
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
-	u32 interval = freq * SDRAM_TREF / sdram_rows;
-
-	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freqs;
-	int ret;
-
-	find_freq_tables(&pxa_freqs_table, &pxa_freqs);
-	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
-	if (freq_debug)
-		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
-			 policy->min, policy->max);
-
-	return ret;
-}
-
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
-	return get_clk_frequency_khz(0);
-}
-
-static int pxa_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freq_settings;
-	struct cpufreq_freqs freqs;
-	unsigned int idx;
-	unsigned long flags;
-	unsigned int new_freq_cpu, new_freq_mem;
-	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
-	int ret = 0;
-
-	/* Get the current policy */
-	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-					   target_freq, relation, &idx)) {
-		return -EINVAL;
-	}
-
-	new_freq_cpu = pxa_freq_settings[idx].khz;
-	new_freq_mem = pxa_freq_settings[idx].membus;
-	freqs.old = policy->cur;
-	freqs.new = new_freq_cpu;
-	freqs.cpu = policy->cpu;
-
-	if (freq_debug)
-		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
-			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
-
-	if (vcc_core && freqs.new > freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-	if (ret)
-		return ret;
-	/*
-	 * Tell everyone what we're about to do...
-	 * you should add a notify client with any platform specific
-	 * Vcc changing capability
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.	 If we're
-	 * speeding up we need to set the larger DRI value after the change.
-	 */
-	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
-	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
-		preset_mdrefr |= mdrefr_dri(new_freq_mem);
-	}
-	postset_mdrefr =
-		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
-	/* If we're dividing the memory clock by two for the SDRAM clock, this
-	 * must be set prior to the change.  Clearing the divide must be done
-	 * after the change.
-	 */
-	if (pxa_freq_settings[idx].div2) {
-		preset_mdrefr  |= MDREFR_DB2_MASK;
-		postset_mdrefr |= MDREFR_DB2_MASK;
-	} else {
-		postset_mdrefr &= ~MDREFR_DB2_MASK;
-	}
-
-	local_irq_save(flags);
-
-	/* Set new the CCCR and prepare CCLKCFG */
-	CCCR = pxa_freq_settings[idx].cccr;
-	cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
-	asm volatile("							\n\
-		ldr	r4, [%1]		/* load MDREFR */	\n\
-		b	2f						\n\
-		.align	5						\n\
-1:									\n\
-		str	%3, [%1]		/* preset the MDREFR */	\n\
-		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%4, [%1]		/* postset the MDREFR */ \n\
-									\n\
-		b	3f						\n\
-2:		b	1b						\n\
-3:		nop							\n\
-	  "
-		     : "=&r" (unused)
-		     : "r" (MDREFR), "r" (cclkcfg),
-		       "r" (preset_mdrefr), "r" (postset_mdrefr)
-		     : "r4", "r5");
-	local_irq_restore(flags);
-
-	/*
-	 * Tell everyone what we've just done...
-	 * you should add a notify client with any platform specific
-	 * SDRAM refresh timer adjustments
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	/*
-	 * Even if voltage setting fails, we don't report it, as the frequency
-	 * change succeeded. The voltage reduction is not a critical failure,
-	 * only power savings will suffer from this.
-	 *
-	 * Note: if the voltage change fails, and a return value is returned, a
-	 * bug is triggered (seems a deadlock). Should anybody find out where,
-	 * the "return 0" should become a "return ret".
-	 */
-	if (vcc_core && freqs.new < freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-
-	return 0;
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int i;
-	unsigned int freq;
-	struct cpufreq_frequency_table *pxa255_freq_table;
-	pxa_freqs_t *pxa255_freqs;
-
-	/* try to guess pxa27x cpu */
-	if (cpu_is_pxa27x())
-		pxa27x_guess_max_freq();
-
-	pxa_cpufreq_init_voltages();
-
-	init_sdram_rows();
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
-	policy->min = policy->max = policy->cur;
-
-	/* Generate pxa25x the run cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
-		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-		pxa255_run_freq_table[i].index = i;
-	}
-	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
-		pxa255_turbo_freq_table[i].frequency =
-			pxa255_turbo_freqs[i].khz;
-		pxa255_turbo_freq_table[i].index = i;
-	}
-	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	pxa255_turbo_table = !!pxa255_turbo_table;
-
-	/* Generate the pxa27x cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
-		freq = pxa27x_freqs[i].khz;
-		if (freq > pxa27x_maxfreq)
-			break;
-		pxa27x_freq_table[i].frequency = freq;
-		pxa27x_freq_table[i].index = i;
-	}
-	pxa27x_freq_table[i].index = i;
-	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/*
-	 * Set the policy's minimum and maximum frequencies from the tables
-	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
-	 */
-	if (cpu_is_pxa25x()) {
-		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
-		pr_info("PXA255 cpufreq using %s frequency table\n",
-			pxa255_turbo_table ? "turbo" : "run");
-		cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
-	}
-	else if (cpu_is_pxa27x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
-
-	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-
-	return 0;
-}
-
-static struct cpufreq_driver pxa_cpufreq_driver = {
-	.verify	= pxa_verify_policy,
-	.target	= pxa_set_target,
-	.init	= pxa_cpufreq_init,
-	.get	= pxa_cpufreq_get,
-	.name	= "PXA2xx",
-};
-
-static int __init pxa_cpu_init(void)
-{
-	int ret = -ENODEV;
-	if (cpu_is_pxa25x() || cpu_is_pxa27x())
-		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
-	return ret;
-}
-
-static void __exit pxa_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&pxa_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
-MODULE_LICENSE("GPL");
-module_init(pxa_cpu_init);
-module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
deleted file mode 100644
index b85b4ab7aac6..000000000000
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
- * Copyright (C) 2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/pxa3xx-regs.h>
-
-#include "generic.h"
-
-#define HSS_104M	(0)
-#define HSS_156M	(1)
-#define HSS_208M	(2)
-#define HSS_312M	(3)
-
-#define SMCFS_78M	(0)
-#define SMCFS_104M	(2)
-#define SMCFS_208M	(5)
-
-#define SFLFS_104M	(0)
-#define SFLFS_156M	(1)
-#define SFLFS_208M	(2)
-#define SFLFS_312M	(3)
-
-#define XSPCLK_156M	(0)
-#define XSPCLK_NONE	(3)
-
-#define DMCFS_26M	(0)
-#define DMCFS_260M	(3)
-
-struct pxa3xx_freq_info {
-	unsigned int cpufreq_mhz;
-	unsigned int core_xl : 5;
-	unsigned int core_xn : 3;
-	unsigned int hss : 2;
-	unsigned int dmcfs : 2;
-	unsigned int smcfs : 3;
-	unsigned int sflfs : 2;
-	unsigned int df_clkdiv : 3;
-
-	int	vcc_core;	/* in mV */
-	int	vcc_sram;	/* in mV */
-};
-
-#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
-{									\
-	.cpufreq_mhz	= cpufreq,					\
-	.core_xl	= _xl,						\
-	.core_xn	= _xn,						\
-	.hss		= HSS_##_hss##M,				\
-	.dmcfs		= DMCFS_##_dmc##M,				\
-	.smcfs		= SMCFS_##_smc##M,				\
-	.sflfs		= SFLFS_##_sfl##M,				\
-	.df_clkdiv	= _dfi,						\
-	.vcc_core	= vcore,					\
-	.vcc_sram	= vsram,					\
-}
-
-static struct pxa3xx_freq_info pxa300_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-};
-
-static struct pxa3xx_freq_info pxa320_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
-};
-
-static unsigned int pxa3xx_freqs_num;
-static struct pxa3xx_freq_info *pxa3xx_freqs;
-static struct cpufreq_frequency_table *pxa3xx_freqs_table;
-
-static int setup_freqs_table(struct cpufreq_policy *policy,
-			     struct pxa3xx_freq_info *freqs, int num)
-{
-	struct cpufreq_frequency_table *table;
-	int i;
-
-	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
-	if (table == NULL)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		table[i].index = i;
-		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
-	}
-	table[num].index = i;
-	table[num].frequency = CPUFREQ_TABLE_END;
-
-	pxa3xx_freqs = freqs;
-	pxa3xx_freqs_num = num;
-	pxa3xx_freqs_table = table;
-
-	return cpufreq_frequency_table_cpuinfo(policy, table);
-}
-
-static void __update_core_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
-	uint32_t accr = ACCR;
-	uint32_t xclkcfg;
-
-	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
-	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
-
-	/* No clock until core PLL is re-locked */
-	accr |= ACCR_XSPCLK(XSPCLK_NONE);
-
-	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
-
-	ACCR = accr;
-	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static void __update_bus_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask;
-	uint32_t accr = ACCR;
-
-	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
-		ACCR_DMCFS_MASK;
-
-	accr &= ~mask;
-	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
-		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
-
-	ACCR = accr;
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
-}
-
-static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
-{
-	return pxa3xx_get_clk_frequency_khz(0);
-}
-
-static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct pxa3xx_freq_info *next;
-	struct cpufreq_freqs freqs;
-	unsigned long flags;
-	int idx;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
-				target_freq, relation, &idx))
-		return -EINVAL;
-
-	next = &pxa3xx_freqs[idx];
-
-	freqs.old = policy->cur;
-	freqs.new = next->cpufreq_mhz * 1000;
-	freqs.cpu = policy->cpu;
-
-	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
-			freqs.old / 1000, freqs.new / 1000,
-			(freqs.old == freqs.new) ? " (skipped)" : "");
-
-	if (freqs.old == target_freq)
-		return 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-	__update_core_freq(next);
-	__update_bus_freq(next);
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret = -EINVAL;
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.min_freq = 104000;
-	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->max = pxa3xx_get_clk_frequency_khz(0);
-	policy->cur = policy->min = policy->max;
-
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
-
-	if (cpu_is_pxa320())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
-
-	if (ret) {
-		pr_err("failed to setup frequency table\n");
-		return ret;
-	}
-
-	pr_info("CPUFREQ support for PXA3xx initialized\n");
-	return 0;
-}
-
-static struct cpufreq_driver pxa3xx_cpufreq_driver = {
-	.verify		= pxa3xx_cpufreq_verify,
-	.target		= pxa3xx_cpufreq_set,
-	.init		= pxa3xx_cpufreq_init,
-	.get		= pxa3xx_cpufreq_get,
-	.name		= "pxa3xx-cpufreq",
-};
-
-static int __init cpufreq_init(void)
-{
-	if (cpu_is_pxa3xx())
-		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
-
-	return 0;
-}
-module_init(cpufreq_init);
-
-static void __exit cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
-}
-module_exit(cpufreq_exit);
-
-MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
new file mode 100644
index 000000000000..665542e0c9e2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c
index 5f181e733eee..3c0e78ede0da 100644
--- a/arch/arm/mach-s3c24xx/cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq.c
@@ -204,7 +204,6 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	freqs.old = cpu_cur.freq;
 	freqs.new = cpu_new.freq;
 
-	freqs.freqs.cpu = 0;
 	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
 	freqs.freqs.new = cpu_new.freq.armclk / 1000;
 
@@ -218,9 +217,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
 
 	/* start the frequency change */
-
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE);
 
 	/* If hclk is staying the same, then we do not need to
 	 * re-write the IO or the refresh timings whilst we are changing
@@ -264,8 +261,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	local_irq_restore(flags);
 
 	/* notify everyone we've done this */
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE);
 
 	s3c_freq_dbg("%s: finished\n", __func__);
 	return 0;
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index ead5fab0dbb5..3c8ab07c2012 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -40,12 +40,9 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 	return index;
 }
 
-static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device);
-
 static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 	.name	= "s3c64xx_cpuidle",
 	.owner  = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		{
 			.enter            = s3c64xx_enter_idle,
@@ -61,16 +58,6 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 
 static int __init s3c64xx_init_cpuidle(void)
 {
-	int ret;
-
-	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
-
-	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
-	if (ret) {
-		pr_err("Failed to register cpuidle device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
 }
 device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index ca14dbdcfb22..04f9784ff0ed 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -47,7 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SHARP_LOCOMO
 	select SHARP_PARAM
 	select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select PCI
 	select PCI_NANOENGINE
 	help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 1aed9e70465d..2732eef48966 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -8,9 +8,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
deleted file mode 100644
index e8f4d1e19233..000000000000
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * cpu-sa1100.c: clock scaling for the SA1100
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- *
- * Authors:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *   - major rewrite for linux-2.3.99
- *   - rewritten for the more generic power management scheme in
- *     linux-2.4.5-rmk1
- *
- * This software has been developed while working on the LART
- * computing board (http://www.lartmaker.nl/), which is
- * sponsored by the Mobile Multi-media Communications
- * (http://www.mobimedia.org/) and Ubiquitous Communications
- * (http://www.ubicom.tudelft.nl/) projects.
- *
- * The authors can be reached at:
- *
- *  Erik Mouw
- *  Information and Communication Theory Group
- *  Faculty of Information Technology and Systems
- *  Delft University of Technology
- *  P.O. Box 5031
- *  2600 GA Delft
- *  The Netherlands
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * Theory of operations
- * ====================
- *
- * Clock scaling can be used to lower the power consumption of the CPU
- * core. This will give you a somewhat longer running time.
- *
- * The SA-1100 has a single register to change the core clock speed:
- *
- *   PPCR      0x90020014    PLL config
- *
- * However, the DRAM timings are closely related to the core clock
- * speed, so we need to change these, too. The used registers are:
- *
- *   MDCNFG    0xA0000000    DRAM config
- *   MDCAS0    0xA0000004    Access waveform
- *   MDCAS1    0xA0000008    Access waveform
- *   MDCAS2    0xA000000C    Access waveform
- *
- * Care must be taken to change the DRAM parameters the correct way,
- * because otherwise the DRAM becomes unusable and the kernel will
- * crash.
- *
- * The simple solution to avoid a kernel crash is to put the actual
- * clock change in ROM and jump to that code from the kernel. The main
- * disadvantage is that the ROM has to be modified, which is not
- * possible on all SA-1100 platforms. Another disadvantage is that
- * jumping to ROM makes clock switching unnecessary complicated.
- *
- * The idea behind this driver is that the memory configuration can be
- * changed while running from DRAM (even with interrupts turned on!)
- * as long as all re-configuration steps yield a valid DRAM
- * configuration. The advantages are clear: it will run on all SA-1100
- * platforms, and the code is very simple.
- *
- * If you really want to understand what is going on in
- * sa1100_update_dram_timings(), you'll have to read sections 8.2,
- * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
- * Developers Manual" (available for free from Intel).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-struct sa1100_dram_regs {
-	int speed;
-	u32 mdcnfg;
-	u32 mdcas0;
-	u32 mdcas1;
-	u32 mdcas2;
-};
-
-
-static struct cpufreq_driver sa1100_driver;
-
-static struct sa1100_dram_regs sa1100_dram_settings[] = {
-	/*speed,     mdcnfg,     mdcas0,     mdcas1,     mdcas2,   clock freq */
-	{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  59.0 MHz */
-	{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  73.7 MHz */
-	{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  88.5 MHz */
-	{103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
-	{118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
-	{132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
-	{147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
-	{162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
-	{176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
-	{191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
-	{206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
-	{221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
-	{235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
-	{250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
-	{265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
-	{280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
-	{ 0, 0, 0, 0, 0 } /* last entry */
-};
-
-static void sa1100_update_dram_timings(int current_speed, int new_speed)
-{
-	struct sa1100_dram_regs *settings = sa1100_dram_settings;
-
-	/* find speed */
-	while (settings->speed != 0) {
-		if (new_speed == settings->speed)
-			break;
-
-		settings++;
-	}
-
-	if (settings->speed == 0) {
-		panic("%s: couldn't find dram setting for speed %d\n",
-		      __func__, new_speed);
-	}
-
-	/* No risk, no fun: run with interrupts on! */
-	if (new_speed > current_speed) {
-		/* We're going FASTER, so first relax the memory
-		 * timings before changing the core frequency
-		 */
-
-		/* Half the memory access clock */
-		MDCNFG |= MDCNFG_CDB2;
-
-		/* The order of these statements IS important, keep 8
-		 * pulses!!
-		 */
-		MDCAS2 = settings->mdcas2;
-		MDCAS1 = settings->mdcas1;
-		MDCAS0 = settings->mdcas0;
-		MDCNFG = settings->mdcnfg;
-	} else {
-		/* We're going SLOWER: first decrease the core
-		 * frequency and then tighten the memory settings.
-		 */
-
-		/* Half the memory access clock */
-		MDCNFG |= MDCNFG_CDB2;
-
-		/* The order of these statements IS important, keep 8
-		 * pulses!!
-		 */
-		MDCAS0 = settings->mdcas0;
-		MDCAS1 = settings->mdcas1;
-		MDCAS2 = settings->mdcas2;
-		MDCNFG = settings->mdcnfg;
-	}
-}
-
-static int sa1100_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	unsigned int cur = sa11x0_getspeed(0);
-	unsigned int new_ppcr;
-	struct cpufreq_freqs freqs;
-
-	new_ppcr = sa11x0_freq_to_ppcr(target_freq);
-	switch (relation) {
-	case CPUFREQ_RELATION_L:
-		if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
-			new_ppcr--;
-		break;
-	case CPUFREQ_RELATION_H:
-		if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
-		    (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
-			new_ppcr--;
-		break;
-	}
-
-	freqs.old = cur;
-	freqs.new = sa11x0_ppcr_to_freq(new_ppcr);
-	freqs.cpu = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (freqs.new > cur)
-		sa1100_update_dram_timings(cur, freqs.new);
-
-	PPCR = new_ppcr;
-
-	if (freqs.new < cur)
-		sa1100_update_dram_timings(cur, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->cpuinfo.min_freq = 59000;
-	policy->cpuinfo.max_freq = 287000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-static struct cpufreq_driver sa1100_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= sa11x0_verify_speed,
-	.target		= sa1100_target,
-	.get		= sa11x0_getspeed,
-	.init		= sa1100_cpu_init,
-	.name		= "sa1100",
-};
-
-static int __init sa1100_dram_init(void)
-{
-	if (cpu_is_sa1100())
-		return cpufreq_register_driver(&sa1100_driver);
-	else
-		return -ENODEV;
-}
-
-arch_initcall(sa1100_dram_init);
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
deleted file mode 100644
index 48c45b0c92bb..000000000000
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/cpu-sa1110.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note: there are two erratas that apply to the SA1110 here:
- *  7 - SDRAM auto-power-up failure (rev A0)
- * 13 - Corruption of internal register reads/writes following
- *      SDRAM reads (rev A0, B0, B1)
- *
- * We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
- *
- * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
- */
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#undef DEBUG
-
-struct sdram_params {
-	const char name[20];
-	u_char  rows;		/* bits				 */
-	u_char  cas_latency;	/* cycles			 */
-	u_char  tck;		/* clock cycle time (ns)	 */
-	u_char  trcd;		/* activate to r/w (ns)		 */
-	u_char  trp;		/* precharge to activate (ns)	 */
-	u_char  twr;		/* write recovery time (ns)	 */
-	u_short refresh;	/* refresh time for array (us)	 */
-};
-
-struct sdram_info {
-	u_int	mdcnfg;
-	u_int	mdrefr;
-	u_int	mdcas[3];
-};
-
-static struct sdram_params sdram_tbl[] __initdata = {
-	{	/* Toshiba TC59SM716 CL2 */
-		.name		= "TC59SM716-CL2",
-		.rows		= 12,
-		.tck		= 10,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 10,
-		.refresh	= 64000,
-		.cas_latency	= 2,
-	}, {	/* Toshiba TC59SM716 CL3 */
-		.name		= "TC59SM716-CL3",
-		.rows		= 12,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung K4S641632D TC75 */
-		.name		= "K4S641632D",
-		.rows		= 14,
-		.tck		= 9,
-		.trcd		= 27,
-		.trp		= 20,
-		.twr		= 9,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung K4S281632B-1H */
-		.name           = "K4S281632B-1H",
-		.rows		= 12,
-		.tck		= 10,
-		.trp		= 20,
-		.twr		= 10,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung KM416S4030CT */
-		.name		= "KM416S4030CT",
-		.rows		= 13,
-		.tck		= 8,
-		.trcd		= 24,	/* 3 CLKs */
-		.trp		= 24,	/* 3 CLKs */
-		.twr		= 16,	/* Trdl: 2 CLKs */
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Winbond W982516AH75L CL3 */
-		.name		= "W982516AH75L",
-		.rows		= 16,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Micron MT48LC8M16A2TG-75 */
-		.name		= "MT48LC8M16A2TG-75",
-		.rows		= 12,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	},
-};
-
-static struct sdram_params sdram_params;
-
-/*
- * Given a period in ns and frequency in khz, calculate the number of
- * cycles of frequency in period.  Note that we round up to the next
- * cycle, even if we are only slightly over.
- */
-static inline u_int ns_to_cycles(u_int ns, u_int khz)
-{
-	return (ns * khz + 999999) / 1000000;
-}
-
-/*
- * Create the MDCAS register bit pattern.
- */
-static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd)
-{
-	u_int shift;
-
-	rcd = 2 * rcd - 1;
-	shift = delayed + 1 + rcd;
-
-	mdcas[0]  = (1 << rcd) - 1;
-	mdcas[0] |= 0x55555555 << shift;
-	mdcas[1]  = mdcas[2] = 0x55555555 << (shift & 1);
-}
-
-static void
-sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
-		       struct sdram_params *sdram)
-{
-	u_int mem_khz, sd_khz, trp, twr;
-
-	mem_khz = cpu_khz / 2;
-	sd_khz = mem_khz;
-
-	/*
-	 * If SDCLK would invalidate the SDRAM timings,
-	 * run SDCLK at half speed.
-	 *
-	 * CPU steppings prior to B2 must either run the memory at
-	 * half speed or use delayed read latching (errata 13).
-	 */
-	if ((ns_to_cycles(sdram->tck, sd_khz) > 1) ||
-	    (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000))
-		sd_khz /= 2;
-
-	sd->mdcnfg = MDCNFG & 0x007f007f;
-
-	twr = ns_to_cycles(sdram->twr, mem_khz);
-
-	/* trp should always be >1 */
-	trp = ns_to_cycles(sdram->trp, mem_khz) - 1;
-	if (trp < 1)
-		trp = 1;
-
-	sd->mdcnfg |= trp << 8;
-	sd->mdcnfg |= trp << 24;
-	sd->mdcnfg |= sdram->cas_latency << 12;
-	sd->mdcnfg |= sdram->cas_latency << 28;
-	sd->mdcnfg |= twr << 14;
-	sd->mdcnfg |= twr << 30;
-
-	sd->mdrefr = MDREFR & 0xffbffff0;
-	sd->mdrefr |= 7;
-
-	if (sd_khz != mem_khz)
-		sd->mdrefr |= MDREFR_K1DB2;
-
-	/* initial number of '1's in MDCAS + 1 */
-	set_mdcas(sd->mdcas, sd_khz >= 62000,
-		ns_to_cycles(sdram->trcd, mem_khz));
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
-		sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1],
-		sd->mdcas[2]);
-#endif
-}
-
-/*
- * Set the SDRAM refresh rate.
- */
-static inline void sdram_set_refresh(u_int dri)
-{
-	MDREFR = (MDREFR & 0xffff000f) | (dri << 4);
-	(void) MDREFR;
-}
-
-/*
- * Update the refresh period.  We do this such that we always refresh
- * the SDRAMs within their permissible period.  The refresh period is
- * always a multiple of the memory clock (fixed at cpu_clock / 2).
- *
- * FIXME: we don't currently take account of burst accesses here,
- * but neither do Intels DM nor Angel.
- */
-static void
-sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
-{
-	u_int ns_row = (sdram->refresh * 1000) >> sdram->rows;
-	u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32;
-
-#ifdef DEBUG
-	mdelay(250);
-	printk(KERN_DEBUG "new dri value = %d\n", dri);
-#endif
-
-	sdram_set_refresh(dri);
-}
-
-/*
- * Ok, set the CPU frequency.
- */
-static int sa1110_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	struct sdram_params *sdram = &sdram_params;
-	struct cpufreq_freqs freqs;
-	struct sdram_info sd;
-	unsigned long flags;
-	unsigned int ppcr, unused;
-
-	switch (relation) {
-	case CPUFREQ_RELATION_L:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
-			ppcr--;
-		break;
-	case CPUFREQ_RELATION_H:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) &&
-		    (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min))
-			ppcr--;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	freqs.old = sa11x0_getspeed(0);
-	freqs.new = sa11x0_ppcr_to_freq(ppcr);
-	freqs.cpu = 0;
-
-	sdram_calculate_timing(&sd, freqs.new, sdram);
-
-#if 0
-	/*
-	 * These values are wrong according to the SA1110 documentation
-	 * and errata, but they seem to work.  Need to get a storage
-	 * scope on to the SDRAM signals to work out why.
-	 */
-	if (policy->max < 147500) {
-		sd.mdrefr |= MDREFR_K1DB2;
-		sd.mdcas[0] = 0xaaaaaa7f;
-	} else {
-		sd.mdrefr &= ~MDREFR_K1DB2;
-		sd.mdcas[0] = 0xaaaaaa9f;
-	}
-	sd.mdcas[1] = 0xaaaaaaaa;
-	sd.mdcas[2] = 0xaaaaaaaa;
-#endif
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/*
-	 * The clock could be going away for some time.  Set the SDRAMs
-	 * to refresh rapidly (every 64 memory clock cycles).  To get
-	 * through the whole array, we need to wait 262144 mclk cycles.
-	 * We wait 20ms to be safe.
-	 */
-	sdram_set_refresh(2);
-	if (!irqs_disabled())
-		msleep(20);
-	else
-		mdelay(20);
-
-	/*
-	 * Reprogram the DRAM timings with interrupts disabled, and
-	 * ensure that we are doing this within a complete cache line.
-	 * This means that we won't access SDRAM for the duration of
-	 * the programming.
-	 */
-	local_irq_save(flags);
-	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
-	udelay(10);
-	__asm__ __volatile__("\n\
-		b	2f					\n\
-		.align	5					\n\
-1:		str	%3, [%1, #0]		@ MDCNFG	\n\
-		str	%4, [%1, #28]		@ MDREFR	\n\
-		str	%5, [%1, #4]		@ MDCAS0	\n\
-		str	%6, [%1, #8]		@ MDCAS1	\n\
-		str	%7, [%1, #12]		@ MDCAS2	\n\
-		str	%8, [%2, #0]		@ PPCR		\n\
-		ldr	%0, [%1, #0]				\n\
-		b	3f					\n\
-2:		b	1b					\n\
-3:		nop						\n\
-		nop"
-		: "=&r" (unused)
-		: "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg),
-		  "r" (sd.mdrefr), "r" (sd.mdcas[0]),
-		  "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr));
-	local_irq_restore(flags);
-
-	/*
-	 * Now, return the SDRAM refresh back to normal.
-	 */
-	sdram_update_refresh(freqs.new, sdram);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->cpuinfo.min_freq = 59000;
-	policy->cpuinfo.max_freq = 287000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-/* sa1110_driver needs __refdata because it must remain after init registers
- * it with cpufreq_register_driver() */
-static struct cpufreq_driver sa1110_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= sa11x0_verify_speed,
-	.target		= sa1110_target,
-	.get		= sa11x0_getspeed,
-	.init		= sa1110_cpu_init,
-	.name		= "sa1110",
-};
-
-static struct sdram_params *sa1110_find_sdram(const char *name)
-{
-	struct sdram_params *sdram;
-
-	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl);
-	     sdram++)
-		if (strcmp(name, sdram->name) == 0)
-			return sdram;
-
-	return NULL;
-}
-
-static char sdram_name[16];
-
-static int __init sa1110_clk_init(void)
-{
-	struct sdram_params *sdram;
-	const char *name = sdram_name;
-
-	if (!cpu_is_sa1110())
-		return -ENODEV;
-
-	if (!name[0]) {
-		if (machine_is_assabet())
-			name = "TC59SM716-CL3";
-		if (machine_is_pt_system3())
-			name = "K4S641632D";
-		if (machine_is_h3100())
-			name = "KM416S4030CT";
-		if (machine_is_jornada720())
-			name = "K4S281632B-1H";
-		if (machine_is_nanoengine())
-			name = "MT48LC8M16A2TG-75";
-	}
-
-	sdram = sa1110_find_sdram(name);
-	if (sdram) {
-		printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
-			" twr: %d refresh: %d cas_latency: %d\n",
-			sdram->tck, sdram->trcd, sdram->trp,
-			sdram->twr, sdram->refresh, sdram->cas_latency);
-
-		memcpy(&sdram_params, sdram, sizeof(sdram_params));
-
-		return cpufreq_register_driver(&sa1110_driver);
-	}
-
-	return 0;
-}
-
-module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
-arch_initcall(sa1110_clk_init);
diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h
new file mode 100644
index 000000000000..665542e0c9e2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 9e050268cde4..0afeb5c7061c 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -16,39 +16,22 @@
 #include <asm/cpuidle.h>
 #include <asm/io.h>
 
-int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv,
-		       int index)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_default_driver = {
 	.name			= "shmobile_cpuidle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[0].enter	= shmobile_enter_wfi,
 	.safe_state_index	= 0, /* C1 */
 	.state_count		= 1,
 };
 
 static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver;
 
-void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv)
+void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv)
 {
 	cpuidle_drv = drv;
 }
 
-int shmobile_cpuidle_init(void)
+int __init shmobile_cpuidle_init(void)
 {
-	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-
-	cpuidle_register_driver(cpuidle_drv);
-
-	dev->state_count = cpuidle_drv->state_count;
-	cpuidle_register_device(dev);
-
-	return 0;
+	return cpuidle_register(cpuidle_drv, NULL);
 }
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e48606d8a2be..362f9b2d2c02 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -13,9 +13,6 @@ extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
-struct cpuidle_device;
-extern int shmobile_enter_wfi(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
 extern void sh7372_init_irq(void);
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index a0826a48dd08..dec9293bb90d 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -410,11 +410,9 @@ static int sh7372_enter_a4s(struct cpuidle_device *dev,
 static struct cpuidle_driver sh7372_cpuidle_driver = {
 	.name			= "sh7372_cpuidle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.state_count		= 5,
 	.safe_state_index	= 0, /* C1 */
 	.states[0] = ARM_CPUIDLE_WFI_STATE,
-	.states[0].enter = shmobile_enter_wfi,
 	.states[1] = {
 		.name = "C2",
 		.desc = "Core Standby Mode",
@@ -450,12 +448,12 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
 	},
 };
 
-static void sh7372_cpuidle_init(void)
+static void __init sh7372_cpuidle_init(void)
 {
 	shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver);
 }
 #else
-static void sh7372_cpuidle_init(void) {}
+static void __init sh7372_cpuidle_init(void) {}
 #endif
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f6b46ae2b7f8..09b578f9eb84 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
deleted file mode 100644
index e3d6e15ff188..000000000000
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/mach-tegra/cpu-tegra.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-/* Frequency table index must be sequential starting at 0 */
-static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 216000 },
-	{ 1, 312000 },
-	{ 2, 456000 },
-	{ 3, 608000 },
-	{ 4, 760000 },
-	{ 5, 816000 },
-	{ 6, 912000 },
-	{ 7, 1000000 },
-	{ 8, CPUFREQ_TABLE_END },
-};
-
-#define NUM_CPUS	2
-
-static struct clk *cpu_clk;
-static struct clk *pll_x_clk;
-static struct clk *pll_p_clk;
-static struct clk *emc_clk;
-
-static unsigned long target_cpu_speed[NUM_CPUS];
-static DEFINE_MUTEX(tegra_cpu_lock);
-static bool is_suspended;
-
-static int tegra_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static unsigned int tegra_getspeed(unsigned int cpu)
-{
-	unsigned long rate;
-
-	if (cpu >= NUM_CPUS)
-		return 0;
-
-	rate = clk_get_rate(cpu_clk) / 1000;
-	return rate;
-}
-
-static int tegra_cpu_clk_set_rate(unsigned long rate)
-{
-	int ret;
-
-	/*
-	 * Take an extra reference to the main pll so it doesn't turn
-	 * off when we move the cpu off of it
-	 */
-	clk_prepare_enable(pll_x_clk);
-
-	ret = clk_set_parent(cpu_clk, pll_p_clk);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock pll_p\n");
-		goto out;
-	}
-
-	if (rate == clk_get_rate(pll_p_clk))
-		goto out;
-
-	ret = clk_set_rate(pll_x_clk, rate);
-	if (ret) {
-		pr_err("Failed to change pll_x to %lu\n", rate);
-		goto out;
-	}
-
-	ret = clk_set_parent(cpu_clk, pll_x_clk);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock pll_x\n");
-		goto out;
-	}
-
-out:
-	clk_disable_unprepare(pll_x_clk);
-	return ret;
-}
-
-static int tegra_update_cpu_speed(unsigned long rate)
-{
-	int ret = 0;
-	struct cpufreq_freqs freqs;
-
-	freqs.old = tegra_getspeed(0);
-	freqs.new = rate;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	/*
-	 * Vote on memory bus frequency based on cpu frequency
-	 * This sets the minimum frequency, display or avp may request higher
-	 */
-	if (rate >= 816000)
-		clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
-	else if (rate >= 456000)
-		clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
-	else
-		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
-
-	for_each_online_cpu(freqs.cpu)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
-	printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n",
-	       freqs.old, freqs.new);
-#endif
-
-	ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
-	if (ret) {
-		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
-			freqs.new);
-		return ret;
-	}
-
-	for_each_online_cpu(freqs.cpu)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static unsigned long tegra_cpu_highest_speed(void)
-{
-	unsigned long rate = 0;
-	int i;
-
-	for_each_online_cpu(i)
-		rate = max(rate, target_cpu_speed[i]);
-	return rate;
-}
-
-static int tegra_target(struct cpufreq_policy *policy,
-		       unsigned int target_freq,
-		       unsigned int relation)
-{
-	unsigned int idx;
-	unsigned int freq;
-	int ret = 0;
-
-	mutex_lock(&tegra_cpu_lock);
-
-	if (is_suspended) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	cpufreq_frequency_table_target(policy, freq_table, target_freq,
-		relation, &idx);
-
-	freq = freq_table[idx].frequency;
-
-	target_cpu_speed[policy->cpu] = freq;
-
-	ret = tegra_update_cpu_speed(tegra_cpu_highest_speed());
-
-out:
-	mutex_unlock(&tegra_cpu_lock);
-	return ret;
-}
-
-static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
-	void *dummy)
-{
-	mutex_lock(&tegra_cpu_lock);
-	if (event == PM_SUSPEND_PREPARE) {
-		is_suspended = true;
-		pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n",
-			freq_table[0].frequency);
-		tegra_update_cpu_speed(freq_table[0].frequency);
-	} else if (event == PM_POST_SUSPEND) {
-		is_suspended = false;
-	}
-	mutex_unlock(&tegra_cpu_lock);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block tegra_cpu_pm_notifier = {
-	.notifier_call = tegra_pm_notify,
-};
-
-static int tegra_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu >= NUM_CPUS)
-		return -EINVAL;
-
-	clk_prepare_enable(emc_clk);
-	clk_prepare_enable(cpu_clk);
-
-	cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-	policy->cur = tegra_getspeed(policy->cpu);
-	target_cpu_speed[policy->cpu] = policy->cur;
-
-	/* FIXME: what's the actual transition time? */
-	policy->cpuinfo.transition_latency = 300 * 1000;
-
-	cpumask_copy(policy->cpus, cpu_possible_mask);
-
-	if (policy->cpu == 0)
-		register_pm_notifier(&tegra_cpu_pm_notifier);
-
-	return 0;
-}
-
-static int tegra_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	clk_disable_unprepare(emc_clk);
-	return 0;
-}
-
-static struct freq_attr *tegra_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver tegra_cpufreq_driver = {
-	.verify		= tegra_verify_speed,
-	.target		= tegra_target,
-	.get		= tegra_getspeed,
-	.init		= tegra_cpu_init,
-	.exit		= tegra_cpu_exit,
-	.name		= "tegra",
-	.attr		= tegra_cpufreq_attr,
-};
-
-static int __init tegra_cpufreq_init(void)
-{
-	cpu_clk = clk_get_sys(NULL, "cpu");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	pll_x_clk = clk_get_sys(NULL, "pll_x");
-	if (IS_ERR(pll_x_clk))
-		return PTR_ERR(pll_x_clk);
-
-	pll_p_clk = clk_get_sys(NULL, "pll_p_cclk");
-	if (IS_ERR(pll_p_clk))
-		return PTR_ERR(pll_p_clk);
-
-	emc_clk = clk_get_sys("cpu", "emc");
-	if (IS_ERR(emc_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(emc_clk);
-	}
-
-	return cpufreq_register_driver(&tegra_cpufreq_driver);
-}
-
-static void __exit tegra_cpufreq_exit(void)
-{
-        cpufreq_unregister_driver(&tegra_cpufreq_driver);
-	clk_put(emc_clk);
-	clk_put(cpu_clk);
-}
-
-
-MODULE_AUTHOR("Colin Cross <ccross@android.com>");
-MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
-MODULE_LICENSE("GPL");
-module_init(tegra_cpufreq_init);
-module_exit(tegra_cpufreq_exit);
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 0f4e8c483b34..1d1c6023f4a2 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -23,39 +23,13 @@
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.state_count = 1,
 	.states = {
 		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
 	},
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 int __init tegra114_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, NULL);
 }
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index 825ced4f7a40..590ec25855dd 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -43,32 +43,33 @@ static atomic_t abort_barrier;
 static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 				    struct cpuidle_driver *drv,
 				    int index);
+#define TEGRA20_MAX_STATES 2
+#else
+#define TEGRA20_MAX_STATES 1
 #endif
 
-static struct cpuidle_state tegra_idle_states[] = {
-	[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-	[1] = {
-		.enter			= tegra20_idle_lp2_coupled,
-		.exit_latency		= 5000,
-		.target_residency	= 10000,
-		.power_usage		= 0,
-		.flags			= CPUIDLE_FLAG_TIME_VALID |
-					  CPUIDLE_FLAG_COUPLED,
-		.name			= "powered-down",
-		.desc			= "CPU power gated",
-	},
-#endif
-};
-
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
+	.states = {
+		ARM_CPUIDLE_WFI_STATE_PWR(600),
+#ifdef CONFIG_PM_SLEEP
+		{
+			.enter            = tegra20_idle_lp2_coupled,
+			.exit_latency     = 5000,
+			.target_residency = 10000,
+			.power_usage      = 0,
+			.flags            = CPUIDLE_FLAG_TIME_VALID |
+			CPUIDLE_FLAG_COUPLED,
+			.name             = "powered-down",
+			.desc             = "CPU power gated",
+		},
+#endif
+	},
+	.state_count = TEGRA20_MAX_STATES,
+	.safe_state_index = 0,
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 #ifdef CONFIG_PM_SLEEP
 #ifdef CONFIG_SMP
 static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
@@ -217,39 +218,8 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 
 int __init tegra20_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
 #ifdef CONFIG_PM_SLEEP
 	tegra_tear_down_cpu = tegra20_tear_down_cpu;
 #endif
-
-	drv->state_count = ARRAY_SIZE(tegra_idle_states);
-	memcpy(drv->states, tegra_idle_states,
-			drv->state_count * sizeof(drv->states[0]));
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-		dev->coupled_cpus = *cpu_possible_mask;
-#endif
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
 }
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 8b50cf4ddd6f..36dc2befa9d8 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -43,7 +43,6 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev,
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 #ifdef CONFIG_PM_SLEEP
 	.state_count = 2,
 #else
@@ -65,8 +64,6 @@ static struct cpuidle_driver tegra_idle_driver = {
 	},
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 #ifdef CONFIG_PM_SLEEP
 static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
 					   struct cpuidle_driver *drv,
@@ -157,32 +154,8 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev,
 
 int __init tegra30_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
 #ifdef CONFIG_PM_SLEEP
 	tegra_tear_down_cpu = tegra30_tear_down_cpu;
 #endif
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, NULL);
 }
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
index ce9149302cc3..488e07472d98 100644
--- a/arch/arm/mach-ux500/cpuidle.c
+++ b/arch/arm/mach-ux500/cpuidle.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/cpuidle.h>
-#include <linux/clockchips.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
 #include <linux/smp.h>
@@ -22,7 +21,6 @@
 
 static atomic_t master = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(master_lock);
-static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);
 
 static inline int ux500_enter_idle(struct cpuidle_device *dev,
 				   struct cpuidle_driver *drv, int index)
@@ -30,8 +28,6 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev,
 	int this_cpu = smp_processor_id();
 	bool recouple = false;
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu);
-
 	if (atomic_inc_return(&master) == num_online_cpus()) {
 
 		/* With this lock, we prevent the other cpu to exit and enter
@@ -91,22 +87,20 @@ out:
 		spin_unlock(&master_lock);
 	}
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu);
-
 	return index;
 }
 
 static struct cpuidle_driver ux500_idle_driver = {
 	.name = "ux500_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		ARM_CPUIDLE_WFI_STATE,
 		{
 			.enter		  = ux500_enter_idle,
 			.exit_latency	  = 70,
 			.target_residency = 260,
-			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID |
+			                    CPUIDLE_FLAG_TIMER_STOP,
 			.name		  = "ApIdle",
 			.desc		  = "ARM Retention",
 		},
@@ -115,59 +109,13 @@ static struct cpuidle_driver ux500_idle_driver = {
 	.state_count = 2,
 };
 
-/*
- * For each cpu, setup the broadcast timer because we will
- * need to migrate the timers for the states >= ApIdle.
- */
-static void ux500_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
 int __init ux500_idle_init(void)
 {
-	int ret, cpu;
-	struct cpuidle_device *device;
-
         /* Configure wake up reasons */
 	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
 			     PRCMU_WAKEUP(ABB));
 
-	/*
-	 * Configure the timer broadcast for each cpu, that must
-	 * be done from the cpu context, so we use a smp cross
-	 * call with 'on_each_cpu'.
-	 */
-	on_each_cpu(ux500_setup_broadcast_timer, NULL, 1);
-
-	ret = cpuidle_register_driver(&ux500_idle_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register ux500 idle driver\n");
-		return ret;
-	}
-
-	for_each_online_cpu(cpu) {
-		device = &per_cpu(ux500_cpuidle_device, cpu);
-		device->cpu = cpu;
-		ret = cpuidle_register_device(device);
-		if (ret) {
-			printk(KERN_ERR "Failed to register cpuidle "
-			       "device for cpu%d\n", cpu);
-			goto out_unregister;
-		}
-	}
-out:
-	return ret;
-
-out_unregister:
-	for_each_online_cpu(cpu) {
-		device = &per_cpu(ux500_cpuidle_device, cpu);
-		cpuidle_unregister_device(device);
-	}
-
-	cpuidle_unregister_driver(&ux500_idle_driver);
-	goto out;
+	return cpuidle_register(&ux500_idle_driver, NULL);
 }
 
 device_initcall(ux500_idle_init);
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index c1a868d398bd..22c40308360b 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_AT32AP
-	bool "CPU frequency driver for AT32AP"
-	depends on CPU_FREQ && PLATFORM_AT32AP
-	default n
-	help
-	  This enables the CPU frequency driver for AT32AP processors.
-
-	  For details, take a look in <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endmenu
 
 endmenu
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index f4025db184ff..d5aff36ade92 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index c76a49b9e9d0..4abcf435d599 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index 2d8ab089a64e..18f3fa0470ff 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index b189e0cab04b..06e389cfcd12 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index 2e4de42a53c4..2518a1368d7c 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index fad3cd22dfd3..245ef6bd0fa6 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index 29986230aaa5..fa6cbac6e418 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index a582465e1cef..bbd5131021a5 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 57a79df2ce5d..c1cd726f9012 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 1a49bd8c6340..754ae56b2767 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 206a1b67f763..58589d8cc0ac 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index 0421498d666b..57788a42ff83 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 82f24eb251bd..ba7c31e269cb 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 1bee51f22154..0a8bfdc420e0 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index 514c9a9b009a..fc09ec4bc725 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,7 +1,6 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
-obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
deleted file mode 100644
index 18b765629a0c..000000000000
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-static struct clk *cpuclk;
-
-static int at32_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-			policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int at32_get_speed(unsigned int cpu)
-{
-	/* No SMP support */
-	if (cpu)
-		return 0;
-	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
-}
-
-static unsigned int	ref_freq;
-static unsigned long	loops_per_jiffy_ref;
-
-static int at32_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	long freq;
-
-	/* Convert target_freq from kHz to Hz */
-	freq = clk_round_rate(cpuclk, target_freq * 1000);
-
-	/* Check if policy->min <= new_freq <= policy->max */
-	if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
-		return -EINVAL;
-
-	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
-
-	freqs.old = at32_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	if (!ref_freq) {
-		ref_freq = freqs.old;
-		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	if (freqs.old < freqs.new)
-		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-				loops_per_jiffy_ref, ref_freq, freqs.new);
-	clk_set_rate(cpuclk, freq);
-	if (freqs.new < freqs.old)
-		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-				loops_per_jiffy_ref, ref_freq, freqs.new);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
-
-	return 0;
-}
-
-static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpuclk = clk_get(NULL, "cpu");
-	if (IS_ERR(cpuclk)) {
-		pr_debug("cpufreq: could not get CPU clk\n");
-		return PTR_ERR(cpuclk);
-	}
-
-	policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-	policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-	policy->cpuinfo.transition_latency = 0;
-	policy->cur = at32_get_speed(0);
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-
-	printk("cpufreq: AT32AP CPU frequency driver\n");
-
-	return 0;
-}
-
-static struct cpufreq_driver at32_driver = {
-	.name		= "at32ap",
-	.owner		= THIS_MODULE,
-	.init		= at32_cpufreq_driver_init,
-	.verify		= at32_verify_speed,
-	.target		= at32_set_target,
-	.get		= at32_get_speed,
-	.flags		= CPUFREQ_STICKY,
-};
-
-static int __init at32_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&at32_driver);
-}
-late_initcall(at32_cpufreq_init);
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 75f0ba29ebb9..675466d490d4 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM)          += pm.o
 ifneq ($(CONFIG_BF60x),y)
 obj-$(CONFIG_PM)	  += dpmc_modes.o
 endif
-obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
deleted file mode 100644
index d88bd31319e6..000000000000
--- a/arch/blackfin/mach-common/cpufreq.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Blackfin core clock scaling
- *
- * Copyright 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <asm/blackfin.h>
-#include <asm/time.h>
-#include <asm/dpmc.h>
-
-
-/* this is the table of CCLK frequencies, in Hz */
-/* .index is the entry in the auxiliary dpm_state_table[] */
-static struct cpufreq_frequency_table bfin_freq_table[] = {
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 1,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 2,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
-	},
-};
-
-static struct bfin_dpm_state {
-	unsigned int csel; /* system clock divider */
-	unsigned int tscale; /* change the divider on the core timer interrupt */
-} dpm_state_table[3];
-
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-/*
- * normalized to maximum frequency offset for CYCLES,
- * used in time-ts cycles clock source, but could be used
- * somewhere also.
- */
-unsigned long long __bfin_cycles_off;
-unsigned int __bfin_cycles_mod;
-#endif
-
-/**************************************************************************/
-static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
-{
-
-	unsigned long csel, min_cclk;
-	int index;
-
-	/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
-#if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \
-	&& defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
-	min_cclk = sclk * 2;
-#else
-	min_cclk = sclk;
-#endif
-
-#ifndef CONFIG_BF60x
-	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
-#else
-	csel = bfin_read32(CGU0_DIV) & 0x1F;
-#endif
-
-	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) {
-		bfin_freq_table[index].frequency = cclk >> index;
-#ifndef CONFIG_BF60x
-		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
-#else
-		dpm_state_table[index].csel = csel;
-#endif
-		dpm_state_table[index].tscale =  (TIME_SCALE >> index) - 1;
-
-		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
-						 bfin_freq_table[index].frequency,
-						 dpm_state_table[index].csel,
-						 dpm_state_table[index].tscale);
-	}
-	return;
-}
-
-static void bfin_adjust_core_timer(void *info)
-{
-	unsigned int tscale;
-	unsigned int index = *(unsigned int *)info;
-
-	/* we have to adjust the core timer, because it is using cclk */
-	tscale = dpm_state_table[index].tscale;
-	bfin_write_TSCALE(tscale);
-	return;
-}
-
-static unsigned int bfin_getfreq_khz(unsigned int cpu)
-{
-	/* Both CoreA/B have the same core clock */
-	return get_cclk() / 1000;
-}
-
-#ifdef CONFIG_BF60x
-unsigned long cpu_set_cclk(int cpu, unsigned long new)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = clk_get(NULL, "CCLK");
-	if (IS_ERR(clk))
-		return -ENODEV;
-
-	ret = clk_set_rate(clk, new);
-	clk_put(clk);
-	return ret;
-}
-#endif
-
-static int bfin_target(struct cpufreq_policy *poli,
-			unsigned int target_freq, unsigned int relation)
-{
-#ifndef CONFIG_BF60x
-	unsigned int plldiv;
-#endif
-	unsigned int index, cpu;
-	unsigned long cclk_hz;
-	struct cpufreq_freqs freqs;
-	static unsigned long lpj_ref;
-	static unsigned int  lpj_ref_freq;
-	int ret = 0;
-
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-	cycles_t cycles;
-#endif
-
-	for_each_online_cpu(cpu) {
-		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-
-		if (!policy)
-			continue;
-
-		if (cpufreq_frequency_table_target(policy, bfin_freq_table,
-				 target_freq, relation, &index))
-			return -EINVAL;
-
-		cclk_hz = bfin_freq_table[index].frequency;
-
-		freqs.old = bfin_getfreq_khz(0);
-		freqs.new = cclk_hz;
-		freqs.cpu = cpu;
-
-		pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-			 cclk_hz, target_freq, freqs.old);
-
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-		if (cpu == CPUFREQ_CPU) {
-#ifndef CONFIG_BF60x
-			plldiv = (bfin_read_PLL_DIV() & SSEL) |
-						dpm_state_table[index].csel;
-			bfin_write_PLL_DIV(plldiv);
-#else
-			ret = cpu_set_cclk(cpu, freqs.new * 1000);
-			if (ret != 0) {
-				WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
-				break;
-			}
-#endif
-			on_each_cpu(bfin_adjust_core_timer, &index, 1);
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-			cycles = get_cycles();
-			SSYNC();
-			cycles += 10; /* ~10 cycles we lose after get_cycles() */
-			__bfin_cycles_off +=
-			    (cycles << __bfin_cycles_mod) - (cycles << index);
-			__bfin_cycles_mod = index;
-#endif
-			if (!lpj_ref_freq) {
-				lpj_ref = loops_per_jiffy;
-				lpj_ref_freq = freqs.old;
-			}
-			if (freqs.new != freqs.old) {
-				loops_per_jiffy = cpufreq_scale(lpj_ref,
-						lpj_ref_freq, freqs.new);
-			}
-		}
-		/* TODO: just test case for cycles clock source, remove later */
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	pr_debug("cpufreq: done\n");
-	return ret;
-}
-
-static int bfin_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, bfin_freq_table);
-}
-
-static int __bfin_cpu_init(struct cpufreq_policy *policy)
-{
-
-	unsigned long cclk, sclk;
-
-	cclk = get_cclk() / 1000;
-	sclk = get_sclk() / 1000;
-
-	if (policy->cpu == CPUFREQ_CPU)
-		bfin_init_tables(cclk, sclk);
-
-	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
-
-	policy->cur = cclk;
-	cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
-	return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
-}
-
-static struct freq_attr *bfin_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver bfin_driver = {
-	.verify = bfin_verify_speed,
-	.target = bfin_target,
-	.get = bfin_getfreq_khz,
-	.init = __bfin_cpu_init,
-	.name = "bfin cpufreq",
-	.owner = THIS_MODULE,
-	.attr = bfin_freq_attr,
-};
-
-static int __init bfin_cpu_init(void)
-{
-	return cpufreq_register_driver(&bfin_driver);
-}
-
-static void __exit bfin_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&bfin_driver);
-}
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("cpufreq driver for Blackfin");
-MODULE_LICENSE("GPL");
-
-module_init(bfin_cpu_init);
-module_exit(bfin_cpu_exit);
diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile
index d366e0891988..18a227196a41 100644
--- a/arch/cris/arch-v32/mach-a3/Makefile
+++ b/arch/cris/arch-v32/mach-a3/Makefile
@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 
diff --git a/arch/cris/arch-v32/mach-a3/cpufreq.c b/arch/cris/arch-v32/mach-a3/cpufreq.c
deleted file mode 100644
index ee391ecb5bc9..000000000000
--- a/arch/cris/arch-v32/mach-a3/cpufreq.c
+++ /dev/null
@@ -1,152 +0,0 @@
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/clkgen_defs.h>
-#include <hwregs/ddr2_defs.h>
-
-static int
-cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
-	void *data);
-
-static struct notifier_block cris_sdram_freq_notifier_block = {
-	.notifier_call = cris_sdram_freq_notifier
-};
-
-static struct cpufreq_frequency_table cris_freq_table[] = {
-	{0x01,	6000},
-	{0x02,	200000},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
-{
-	reg_clkgen_rw_clk_ctrl clk_ctrl;
-	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
-	return clk_ctrl.pll ? 200000 : 6000;
-}
-
-static void cris_freq_set_cpu_state(unsigned int state)
-{
-	int i = 0;
-	struct cpufreq_freqs freqs;
-	reg_clkgen_rw_clk_ctrl clk_ctrl;
-	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
-
-#ifdef CONFIG_SMP
-	for_each_present_cpu(i)
-#endif
-	{
-		freqs.old = cris_freq_get_cpu_frequency(i);
-		freqs.new = cris_freq_table[state].frequency;
-		freqs.cpu = i;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_disable();
-
-	/* Even though we may be SMP they will share the same clock
-	 * so all settings are made on CPU0. */
-	if (cris_freq_table[state].frequency == 200000)
-		clk_ctrl.pll = 1;
-	else
-		clk_ctrl.pll = 0;
-	REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-
-	local_irq_enable();
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-};
-
-static int cris_freq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]);
-}
-
-static int cris_freq_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target(policy, cris_freq_table,
-			target_freq, relation, &newstate))
-		return -EINVAL;
-
-	cris_freq_set_cpu_state(newstate);
-
-	return 0;
-}
-
-static int cris_freq_cpu_init(struct cpufreq_policy *policy)
-{
-	int result;
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
-	policy->cur = cris_freq_get_cpu_frequency(0);
-
-	result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table);
-	if (result)
-		return (result);
-
-	cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu);
-
-	return 0;
-}
-
-
-static int cris_freq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-
-static struct freq_attr *cris_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver cris_freq_driver = {
-	.get	= cris_freq_get_cpu_frequency,
-	.verify	= cris_freq_verify,
-	.target	= cris_freq_target,
-	.init	= cris_freq_cpu_init,
-	.exit	= cris_freq_cpu_exit,
-	.name	= "cris_freq",
-	.owner	= THIS_MODULE,
-	.attr	= cris_freq_attr,
-};
-
-static int __init cris_freq_init(void)
-{
-	int ret;
-	ret = cpufreq_register_driver(&cris_freq_driver);
-	cpufreq_register_notifier(&cris_sdram_freq_notifier_block,
-		CPUFREQ_TRANSITION_NOTIFIER);
-	return ret;
-}
-
-static int
-cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
-	void *data)
-{
-	int i;
-	struct cpufreq_freqs *freqs = data;
-	if (val == CPUFREQ_PRECHANGE) {
-		reg_ddr2_rw_cfg cfg =
-		  REG_RD(ddr2, regi_ddr2_ctrl, rw_cfg);
-		cfg.ref_interval = (freqs->new == 200000 ? 1560 : 46);
-
-		if (freqs->new == 200000)
-			for (i = 0; i < 50000; i++);
-		REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing);
-	}
-	return 0;
-}
-
-
-module_init(cris_freq_init);
diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile
index d366e0891988..18a227196a41 100644
--- a/arch/cris/arch-v32/mach-fs/Makefile
+++ b/arch/cris/arch-v32/mach-fs/Makefile
@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 
diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/arch/cris/arch-v32/mach-fs/cpufreq.c
deleted file mode 100644
index d92cf70d1cbe..000000000000
--- a/arch/cris/arch-v32/mach-fs/cpufreq.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/hwregs/config_defs.h>
-#include <arch/hwregs/bif_core_defs.h>
-
-static int
-cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
-			 void *data);
-
-static struct notifier_block cris_sdram_freq_notifier_block = {
-	.notifier_call = cris_sdram_freq_notifier
-};
-
-static struct cpufreq_frequency_table cris_freq_table[] = {
-	{0x01, 6000},
-	{0x02, 200000},
-	{0, CPUFREQ_TABLE_END},
-};
-
-static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
-{
-	reg_config_rw_clk_ctrl clk_ctrl;
-	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
-	return clk_ctrl.pll ? 200000 : 6000;
-}
-
-static void cris_freq_set_cpu_state(unsigned int state)
-{
-	int i;
-	struct cpufreq_freqs freqs;
-	reg_config_rw_clk_ctrl clk_ctrl;
-	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
-
-	for_each_possible_cpu(i) {
-		freqs.old = cris_freq_get_cpu_frequency(i);
-		freqs.new = cris_freq_table[state].frequency;
-		freqs.cpu = i;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_disable();
-
-	/* Even though we may be SMP they will share the same clock
-	 * so all settings are made on CPU0. */
-	if (cris_freq_table[state].frequency == 200000)
-		clk_ctrl.pll = 1;
-	else
-		clk_ctrl.pll = 0;
-	REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
-
-	local_irq_enable();
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-};
-
-static int cris_freq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]);
-}
-
-static int cris_freq_target(struct cpufreq_policy *policy,
-			    unsigned int target_freq, unsigned int relation)
-{
-	unsigned int newstate = 0;
-
-	if (cpufreq_frequency_table_target
-	    (policy, cris_freq_table, target_freq, relation, &newstate))
-		return -EINVAL;
-
-	cris_freq_set_cpu_state(newstate);
-
-	return 0;
-}
-
-static int cris_freq_cpu_init(struct cpufreq_policy *policy)
-{
-	int result;
-
-	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 1000000;	/* 1ms */
-	policy->cur = cris_freq_get_cpu_frequency(0);
-
-	result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table);
-	if (result)
-		return (result);
-
-	cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu);
-
-	return 0;
-}
-
-static int cris_freq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *cris_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver cris_freq_driver = {
-	.get = cris_freq_get_cpu_frequency,
-	.verify = cris_freq_verify,
-	.target = cris_freq_target,
-	.init = cris_freq_cpu_init,
-	.exit = cris_freq_cpu_exit,
-	.name = "cris_freq",
-	.owner = THIS_MODULE,
-	.attr = cris_freq_attr,
-};
-
-static int __init cris_freq_init(void)
-{
-	int ret;
-	ret = cpufreq_register_driver(&cris_freq_driver);
-	cpufreq_register_notifier(&cris_sdram_freq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-	return ret;
-}
-
-static int
-cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val,
-			 void *data)
-{
-	int i;
-	struct cpufreq_freqs *freqs = data;
-	if (val == CPUFREQ_PRECHANGE) {
-		reg_bif_core_rw_sdram_timing timing =
-		    REG_RD(bif_core, regi_bif_core, rw_sdram_timing);
-		timing.cpd = (freqs->new == 200000 ? 0 : 1);
-
-		if (freqs->new == 200000)
-			for (i = 0; i < 50000; i++) ;
-		REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing);
-	}
-	return 0;
-}
-
-module_init(cris_freq_init);
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e7e55a00f94f..e725ea01569e 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -591,9 +591,9 @@ source "kernel/power/Kconfig"
 source "drivers/acpi/Kconfig"
 
 if PM
-
-source "arch/ia64/kernel/cpufreq/Kconfig"
-
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
 endif
 
 endmenu
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index d959c84904be..20678a9ed11a 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_PERFMON)		+= perfmon_default_smpl.o
 obj-$(CONFIG_IA64_CYCLONE)	+= cyclone.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
diff --git a/arch/ia64/kernel/cpufreq/Kconfig b/arch/ia64/kernel/cpufreq/Kconfig
deleted file mode 100644
index 2d9d5279b981..000000000000
--- a/arch/ia64/kernel/cpufreq/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config IA64_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	This driver adds a CPUFreq driver which utilizes the ACPI
-	Processor Performance States.
-
-	For details, take a look at <file:Documentation/cpu-freq/>.
-
-	If in doubt, say N.
-
-endif   # CPU_FREQ
-
-endmenu
-
diff --git a/arch/ia64/kernel/cpufreq/Makefile b/arch/ia64/kernel/cpufreq/Makefile
deleted file mode 100644
index 4838f2a57c7a..000000000000
--- a/arch/ia64/kernel/cpufreq/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o
-
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
deleted file mode 100644
index f09b174244d5..000000000000
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * arch/ia64/kernel/cpufreq/acpi-cpufreq.c
- * This file provides the ACPI based P-state support. This
- * module works with generic cpufreq infrastructure. Most of
- * the code is based on i386 version
- * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c)
- *
- * Copyright (C) 2005 Intel Corp
- *      Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pal.h>
-
-#include <linux/acpi.h>
-#include <acpi/processor.h>
-
-MODULE_AUTHOR("Venkatesh Pallipadi");
-MODULE_DESCRIPTION("ACPI Processor P-States Driver");
-MODULE_LICENSE("GPL");
-
-
-struct cpufreq_acpi_io {
-	struct acpi_processor_performance	acpi_data;
-	struct cpufreq_frequency_table		*freq_table;
-	unsigned int				resume;
-};
-
-static struct cpufreq_acpi_io	*acpi_io_data[NR_CPUS];
-
-static struct cpufreq_driver acpi_cpufreq_driver;
-
-
-static int
-processor_set_pstate (
-	u32	value)
-{
-	s64 retval;
-
-	pr_debug("processor_set_pstate\n");
-
-	retval = ia64_pal_set_pstate((u64)value);
-
-	if (retval) {
-		pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n",
-		        value, retval);
-		return -ENODEV;
-	}
-	return (int)retval;
-}
-
-
-static int
-processor_get_pstate (
-	u32	*value)
-{
-	u64	pstate_index = 0;
-	s64 	retval;
-
-	pr_debug("processor_get_pstate\n");
-
-	retval = ia64_pal_get_pstate(&pstate_index,
-	                             PAL_GET_PSTATE_TYPE_INSTANT);
-	*value = (u32) pstate_index;
-
-	if (retval)
-		pr_debug("Failed to get current freq with "
-			"error 0x%lx, idx 0x%x\n", retval, *value);
-
-	return (int)retval;
-}
-
-
-/* To be used only after data->acpi_data is initialized */
-static unsigned
-extract_clock (
-	struct cpufreq_acpi_io *data,
-	unsigned value,
-	unsigned int cpu)
-{
-	unsigned long i;
-
-	pr_debug("extract_clock\n");
-
-	for (i = 0; i < data->acpi_data.state_count; i++) {
-		if (value == data->acpi_data.states[i].status)
-			return data->acpi_data.states[i].core_frequency;
-	}
-	return data->acpi_data.states[i-1].core_frequency;
-}
-
-
-static unsigned int
-processor_get_freq (
-	struct cpufreq_acpi_io	*data,
-	unsigned int		cpu)
-{
-	int			ret = 0;
-	u32			value = 0;
-	cpumask_t		saved_mask;
-	unsigned long 		clock_freq;
-
-	pr_debug("processor_get_freq\n");
-
-	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	if (smp_processor_id() != cpu)
-		goto migrate_end;
-
-	/* processor_get_pstate gets the instantaneous frequency */
-	ret = processor_get_pstate(&value);
-
-	if (ret) {
-		set_cpus_allowed_ptr(current, &saved_mask);
-		printk(KERN_WARNING "get performance failed with error %d\n",
-		       ret);
-		ret = 0;
-		goto migrate_end;
-	}
-	clock_freq = extract_clock(data, value, cpu);
-	ret = (clock_freq*1000);
-
-migrate_end:
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return ret;
-}
-
-
-static int
-processor_set_freq (
-	struct cpufreq_acpi_io	*data,
-	unsigned int		cpu,
-	int			state)
-{
-	int			ret = 0;
-	u32			value = 0;
-	struct cpufreq_freqs    cpufreq_freqs;
-	cpumask_t		saved_mask;
-	int			retval;
-
-	pr_debug("processor_set_freq\n");
-
-	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	if (smp_processor_id() != cpu) {
-		retval = -EAGAIN;
-		goto migrate_end;
-	}
-
-	if (state == data->acpi_data.state) {
-		if (unlikely(data->resume)) {
-			pr_debug("Called after resume, resetting to P%d\n", state);
-			data->resume = 0;
-		} else {
-			pr_debug("Already at target state (P%d)\n", state);
-			retval = 0;
-			goto migrate_end;
-		}
-	}
-
-	pr_debug("Transitioning from P%d to P%d\n",
-		data->acpi_data.state, state);
-
-	/* cpufreq frequency struct */
-	cpufreq_freqs.cpu = cpu;
-	cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
-	cpufreq_freqs.new = data->freq_table[state].frequency;
-
-	/* notify cpufreq */
-	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
-
-	/*
-	 * First we write the target state's 'control' value to the
-	 * control_register.
-	 */
-
-	value = (u32) data->acpi_data.states[state].control;
-
-	pr_debug("Transitioning to state: 0x%08x\n", value);
-
-	ret = processor_set_pstate(value);
-	if (ret) {
-		unsigned int tmp = cpufreq_freqs.new;
-		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
-		cpufreq_freqs.new = cpufreq_freqs.old;
-		cpufreq_freqs.old = tmp;
-		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
-		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
-		printk(KERN_WARNING "Transition failed with error %d\n", ret);
-		retval = -ENODEV;
-		goto migrate_end;
-	}
-
-	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
-
-	data->acpi_data.state = state;
-
-	retval = 0;
-
-migrate_end:
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return (retval);
-}
-
-
-static unsigned int
-acpi_cpufreq_get (
-	unsigned int		cpu)
-{
-	struct cpufreq_acpi_io *data = acpi_io_data[cpu];
-
-	pr_debug("acpi_cpufreq_get\n");
-
-	return processor_get_freq(data, cpu);
-}
-
-
-static int
-acpi_cpufreq_target (
-	struct cpufreq_policy   *policy,
-	unsigned int target_freq,
-	unsigned int relation)
-{
-	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-	unsigned int next_state = 0;
-	unsigned int result = 0;
-
-	pr_debug("acpi_cpufreq_setpolicy\n");
-
-	result = cpufreq_frequency_table_target(policy,
-			data->freq_table, target_freq, relation, &next_state);
-	if (result)
-		return (result);
-
-	result = processor_set_freq(data, policy->cpu, next_state);
-
-	return (result);
-}
-
-
-static int
-acpi_cpufreq_verify (
-	struct cpufreq_policy   *policy)
-{
-	unsigned int result = 0;
-	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
-	pr_debug("acpi_cpufreq_verify\n");
-
-	result = cpufreq_frequency_table_verify(policy,
-			data->freq_table);
-
-	return (result);
-}
-
-
-static int
-acpi_cpufreq_cpu_init (
-	struct cpufreq_policy   *policy)
-{
-	unsigned int		i;
-	unsigned int		cpu = policy->cpu;
-	struct cpufreq_acpi_io	*data;
-	unsigned int		result = 0;
-
-	pr_debug("acpi_cpufreq_cpu_init\n");
-
-	data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
-	if (!data)
-		return (-ENOMEM);
-
-	acpi_io_data[cpu] = data;
-
-	result = acpi_processor_register_performance(&data->acpi_data, cpu);
-
-	if (result)
-		goto err_free;
-
-	/* capability check */
-	if (data->acpi_data.state_count <= 1) {
-		pr_debug("No P-States\n");
-		result = -ENODEV;
-		goto err_unreg;
-	}
-
-	if ((data->acpi_data.control_register.space_id !=
-					ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-	    (data->acpi_data.status_register.space_id !=
-					ACPI_ADR_SPACE_FIXED_HARDWARE)) {
-		pr_debug("Unsupported address space [%d, %d]\n",
-			(u32) (data->acpi_data.control_register.space_id),
-			(u32) (data->acpi_data.status_register.space_id));
-		result = -ENODEV;
-		goto err_unreg;
-	}
-
-	/* alloc freq_table */
-	data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
-	                           (data->acpi_data.state_count + 1),
-	                           GFP_KERNEL);
-	if (!data->freq_table) {
-		result = -ENOMEM;
-		goto err_unreg;
-	}
-
-	/* detect transition latency */
-	policy->cpuinfo.transition_latency = 0;
-	for (i=0; i<data->acpi_data.state_count; i++) {
-		if ((data->acpi_data.states[i].transition_latency * 1000) >
-		    policy->cpuinfo.transition_latency) {
-			policy->cpuinfo.transition_latency =
-			    data->acpi_data.states[i].transition_latency * 1000;
-		}
-	}
-	policy->cur = processor_get_freq(data, policy->cpu);
-
-	/* table init */
-	for (i = 0; i <= data->acpi_data.state_count; i++)
-	{
-		data->freq_table[i].index = i;
-		if (i < data->acpi_data.state_count) {
-			data->freq_table[i].frequency =
-			      data->acpi_data.states[i].core_frequency * 1000;
-		} else {
-			data->freq_table[i].frequency = CPUFREQ_TABLE_END;
-		}
-	}
-
-	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
-	if (result) {
-		goto err_freqfree;
-	}
-
-	/* notify BIOS that we exist */
-	acpi_processor_notify_smm(THIS_MODULE);
-
-	printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management "
-	       "activated.\n", cpu);
-
-	for (i = 0; i < data->acpi_data.state_count; i++)
-		pr_debug("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
-			(i == data->acpi_data.state?'*':' '), i,
-			(u32) data->acpi_data.states[i].core_frequency,
-			(u32) data->acpi_data.states[i].power,
-			(u32) data->acpi_data.states[i].transition_latency,
-			(u32) data->acpi_data.states[i].bus_master_latency,
-			(u32) data->acpi_data.states[i].status,
-			(u32) data->acpi_data.states[i].control);
-
-	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
-	/* the first call to ->target() should result in us actually
-	 * writing something to the appropriate registers. */
-	data->resume = 1;
-
-	return (result);
-
- err_freqfree:
-	kfree(data->freq_table);
- err_unreg:
-	acpi_processor_unregister_performance(&data->acpi_data, cpu);
- err_free:
-	kfree(data);
-	acpi_io_data[cpu] = NULL;
-
-	return (result);
-}
-
-
-static int
-acpi_cpufreq_cpu_exit (
-	struct cpufreq_policy   *policy)
-{
-	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
-	pr_debug("acpi_cpufreq_cpu_exit\n");
-
-	if (data) {
-		cpufreq_frequency_table_put_attr(policy->cpu);
-		acpi_io_data[policy->cpu] = NULL;
-		acpi_processor_unregister_performance(&data->acpi_data,
-		                                      policy->cpu);
-		kfree(data);
-	}
-
-	return (0);
-}
-
-
-static struct freq_attr* acpi_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-
-static struct cpufreq_driver acpi_cpufreq_driver = {
-	.verify 	= acpi_cpufreq_verify,
-	.target 	= acpi_cpufreq_target,
-	.get 		= acpi_cpufreq_get,
-	.init		= acpi_cpufreq_cpu_init,
-	.exit		= acpi_cpufreq_cpu_exit,
-	.name		= "acpi-cpufreq",
-	.owner		= THIS_MODULE,
-	.attr           = acpi_cpufreq_attr,
-};
-
-
-static int __init
-acpi_cpufreq_init (void)
-{
-	pr_debug("acpi_cpufreq_init\n");
-
- 	return cpufreq_register_driver(&acpi_cpufreq_driver);
-}
-
-
-static void __exit
-acpi_cpufreq_exit (void)
-{
-	pr_debug("acpi_cpufreq_exit\n");
-
-	cpufreq_unregister_driver(&acpi_cpufreq_driver);
-	return;
-}
-
-
-late_initcall(acpi_cpufreq_init);
-module_exit(acpi_cpufreq_exit);
-
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3a7b3954ce1b..007a917a980d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2541,7 +2541,14 @@ source "kernel/power/Kconfig"
 
 endmenu
 
-source "arch/mips/kernel/cpufreq/Kconfig"
+config MIPS_EXTERNAL_TIMER
+	bool
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+menu "CPU Power Management"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
 
 source "net/Kconfig"
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index de75fb50562b..520a908d45d6 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n
 
 obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
-obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
-
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig
deleted file mode 100644
index 58c601eee6fd..000000000000
--- a/arch/mips/kernel/cpufreq/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-config MIPS_EXTERNAL_TIMER
-	bool
-
-config MIPS_CPUFREQ
-	bool
-	default y
-	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
-
-if MIPS_CPUFREQ
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config LOONGSON2_CPUFREQ
-	tristate "Loongson2 CPUFreq Driver"
-	select CPU_FREQ_TABLE
-	depends on MIPS_CPUFREQ
-	help
-	  This option adds a CPUFreq driver for loongson processors which
-	  support software configurable cpu frequency.
-
-	  Loongson2F and it's successors support this feature.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-endif	# CPU_FREQ
-
-endmenu
-
-endif	# MIPS_CPUFREQ
diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile
deleted file mode 100644
index 05a5715ee38c..000000000000
--- a/arch/mips/kernel/cpufreq/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Linux/MIPS cpufreq.
-#
-
-obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
deleted file mode 100644
index 3237c5235f9c..000000000000
--- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Cpufreq driver for the loongson-2 processors
- *
- * The 2E revision of loongson processor not support this feature.
- *
- * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
- * Author: Yanhua, yanh@lemote.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/cpufreq.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/sched.h>	/* set_cpus_allowed() */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-
-#include <asm/clock.h>
-
-#include <asm/mach-loongson/loongson.h>
-
-static uint nowait;
-
-static struct clk *cpuclk;
-
-static void (*saved_cpu_wait) (void);
-
-static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
-					unsigned long val, void *data);
-
-static struct notifier_block loongson2_cpufreq_notifier_block = {
-	.notifier_call = loongson2_cpu_freq_notifier
-};
-
-static int loongson2_cpu_freq_notifier(struct notifier_block *nb,
-					unsigned long val, void *data)
-{
-	if (val == CPUFREQ_POSTCHANGE)
-		current_cpu_data.udelay_val = loops_per_jiffy;
-
-	return 0;
-}
-
-static unsigned int loongson2_cpufreq_get(unsigned int cpu)
-{
-	return clk_get_rate(cpuclk);
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
-				     unsigned int target_freq,
-				     unsigned int relation)
-{
-	unsigned int cpu = policy->cpu;
-	unsigned int newstate = 0;
-	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
-	unsigned int freq;
-
-	if (!cpu_online(cpu))
-		return -ENODEV;
-
-	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	if (cpufreq_frequency_table_target
-	    (policy, &loongson2_clockmod_table[0], target_freq, relation,
-	     &newstate))
-		return -EINVAL;
-
-	freq =
-	    ((cpu_clock_freq / 1000) *
-	     loongson2_clockmod_table[newstate].index) / 8;
-	if (freq < policy->min || freq > policy->max)
-		return -EINVAL;
-
-	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
-
-	freqs.cpu = cpu;
-	freqs.old = loongson2_cpufreq_get(cpu);
-	freqs.new = freq;
-	freqs.flags = 0;
-
-	if (freqs.new == freqs.old)
-		return 0;
-
-	/* notifiers */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	/* setting the cpu frequency */
-	clk_set_rate(cpuclk, freq);
-
-	/* notifiers */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: set frequency %u kHz\n", freq);
-
-	return 0;
-}
-
-static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	int i;
-	unsigned long rate;
-	int ret;
-
-	if (!cpu_online(policy->cpu))
-		return -ENODEV;
-
-	cpuclk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpuclk)) {
-		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
-		return PTR_ERR(cpuclk);
-	}
-
-	rate = cpu_clock_freq / 1000;
-	if (!rate) {
-		clk_put(cpuclk);
-		return -EINVAL;
-	}
-	ret = clk_set_rate(cpuclk, rate);
-	if (ret) {
-		clk_put(cpuclk);
-		return ret;
-	}
-
-	/* clock table init */
-	for (i = 2;
-	     (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END);
-	     i++)
-		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
-
-	policy->cur = loongson2_cpufreq_get(policy->cpu);
-
-	cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0],
-					 policy->cpu);
-
-	return cpufreq_frequency_table_cpuinfo(policy,
-					    &loongson2_clockmod_table[0]);
-}
-
-static int loongson2_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-					      &loongson2_clockmod_table[0]);
-}
-
-static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	clk_put(cpuclk);
-	return 0;
-}
-
-static struct freq_attr *loongson2_table_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver loongson2_cpufreq_driver = {
-	.owner = THIS_MODULE,
-	.name = "loongson2",
-	.init = loongson2_cpufreq_cpu_init,
-	.verify = loongson2_cpufreq_verify,
-	.target = loongson2_cpufreq_target,
-	.get = loongson2_cpufreq_get,
-	.exit = loongson2_cpufreq_exit,
-	.attr = loongson2_table_attr,
-};
-
-static struct platform_device_id platform_device_ids[] = {
-	{
-		.name = "loongson2_cpufreq",
-	},
-	{}
-};
-
-MODULE_DEVICE_TABLE(platform, platform_device_ids);
-
-static struct platform_driver platform_driver = {
-	.driver = {
-		.name = "loongson2_cpufreq",
-		.owner = THIS_MODULE,
-	},
-	.id_table = platform_device_ids,
-};
-
-/*
- * This is the simple version of Loongson-2 wait, Maybe we need do this in
- * interrupt disabled context.
- */
-
-static DEFINE_SPINLOCK(loongson2_wait_lock);
-
-static void loongson2_cpu_wait(void)
-{
-	unsigned long flags;
-	u32 cpu_freq;
-
-	spin_lock_irqsave(&loongson2_wait_lock, flags);
-	cpu_freq = LOONGSON_CHIPCFG0;
-	LOONGSON_CHIPCFG0 &= ~0x7;	/* Put CPU into wait mode */
-	LOONGSON_CHIPCFG0 = cpu_freq;	/* Restore CPU state */
-	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
-}
-
-static int __init cpufreq_init(void)
-{
-	int ret;
-
-	/* Register platform stuff */
-	ret = platform_driver_register(&platform_driver);
-	if (ret)
-		return ret;
-
-	pr_info("cpufreq: Loongson-2F CPU frequency driver.\n");
-
-	cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-
-	ret = cpufreq_register_driver(&loongson2_cpufreq_driver);
-
-	if (!ret && !nowait) {
-		saved_cpu_wait = cpu_wait;
-		cpu_wait = loongson2_cpu_wait;
-	}
-
-	return ret;
-}
-
-static void __exit cpufreq_exit(void)
-{
-	if (!nowait && saved_cpu_wait)
-		cpu_wait = saved_cpu_wait;
-	cpufreq_unregister_driver(&loongson2_cpufreq_driver);
-	cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-
-	platform_driver_unregister(&platform_driver);
-}
-
-module_init(cpufreq_init);
-module_exit(cpufreq_exit);
-
-module_param(nowait, uint, 0644);
-MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait");
-
-MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
-MODULE_DESCRIPTION("cpufreq driver for Loongson2F");
-MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 53aaefeb3386..9978f594cac0 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -113,34 +113,10 @@ config CBE_THERM
 	default m
 	depends on CBE_RAS && SPU_BASE
 
-config CBE_CPUFREQ
-	tristate "CBE frequency scaling"
-	depends on CBE_RAS && CPU_FREQ
-	default m
-	help
-	  This adds the cpufreq driver for Cell BE processors.
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-	  If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
-	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ
-	default n
-	help
-	  Select this, if you want to use the PMI interface
-	  to switch frequencies. Using PMI, the
-	  processor will not only be able to run at lower speed,
-	  but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
-	tristate
-	depends on CBE_CPUFREQ_PMI_ENABLE
-	default CBE_CPUFREQ
-
 config PPC_PMI
 	tristate
 	default y
-	depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+	depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
 	help
 	  PMI (Platform Management Interrupt) is a way to
 	  communicate with the BMC (Baseboard Management Controller).
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index a4a89350bcfc..fe053e7c73ee 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
-cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
deleted file mode 100644
index d4c39e32f147..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * cpufreq driver for the cell processor
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/cpufreq.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
-
-static DEFINE_MUTEX(cbe_switch_mutex);
-
-
-/* the CBE supports an 8 step frequency scaling */
-static struct cpufreq_frequency_table cbe_freqs[] = {
-	{1,	0},
-	{2,	0},
-	{3,	0},
-	{4,	0},
-	{5,	0},
-	{6,	0},
-	{8,	0},
-	{10,	0},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-/*
- * hardware specific functions
- */
-
-static int set_pmode(unsigned int cpu, unsigned int slow_mode)
-{
-	int rc;
-
-	if (cbe_cpufreq_has_pmi)
-		rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
-	else
-		rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
-
-	pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
-
-	return rc;
-}
-
-/*
- * cpufreq functions
- */
-
-static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	const u32 *max_freqp;
-	u32 max_freq;
-	int i, cur_pmode;
-	struct device_node *cpu;
-
-	cpu = of_get_cpu_node(policy->cpu, NULL);
-
-	if (!cpu)
-		return -ENODEV;
-
-	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	/*
-	 * Let's check we can actually get to the CELL regs
-	 */
-	if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
-	    !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
-		pr_info("invalid CBE regs pointers for cpufreq\n");
-		return -EINVAL;
-	}
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-
-	of_node_put(cpu);
-
-	if (!max_freqp)
-		return -EINVAL;
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
-	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
-	pr_debug("initializing frequency table\n");
-
-	/* initialize frequency table */
-	for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index;
-		pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
-	}
-
-	/* if DEBUG is enabled set_pmode() measures the latency
-	 * of a transition */
-	policy->cpuinfo.transition_latency = 25000;
-
-	cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
-	pr_debug("current pmode is at %d\n",cur_pmode);
-
-	policy->cur = cbe_freqs[cur_pmode].frequency;
-
-#ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
-#endif
-
-	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
-
-	/* this ensures that policy->cpuinfo_min
-	 * and policy->cpuinfo_max are set correctly */
-	return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs);
-}
-
-static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static int cbe_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, cbe_freqs);
-}
-
-static int cbe_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	int rc;
-	struct cpufreq_freqs freqs;
-	unsigned int cbe_pmode_new;
-
-	cpufreq_frequency_table_target(policy,
-				       cbe_freqs,
-				       target_freq,
-				       relation,
-				       &cbe_pmode_new);
-
-	freqs.old = policy->cur;
-	freqs.new = cbe_freqs[cbe_pmode_new].frequency;
-	freqs.cpu = policy->cpu;
-
-	mutex_lock(&cbe_switch_mutex);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("setting frequency for cpu %d to %d kHz, " \
-		 "1/%d of max frequency\n",
-		 policy->cpu,
-		 cbe_freqs[cbe_pmode_new].frequency,
-		 cbe_freqs[cbe_pmode_new].index);
-
-	rc = set_pmode(policy->cpu, cbe_pmode_new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&cbe_switch_mutex);
-
-	return rc;
-}
-
-static struct cpufreq_driver cbe_cpufreq_driver = {
-	.verify		= cbe_cpufreq_verify,
-	.target		= cbe_cpufreq_target,
-	.init		= cbe_cpufreq_cpu_init,
-	.exit		= cbe_cpufreq_cpu_exit,
-	.name		= "cbe-cpufreq",
-	.owner		= THIS_MODULE,
-	.flags		= CPUFREQ_CONST_LOOPS,
-};
-
-/*
- * module init and destoy
- */
-
-static int __init cbe_cpufreq_init(void)
-{
-	if (!machine_is(cell))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&cbe_cpufreq_driver);
-}
-
-static void __exit cbe_cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&cbe_cpufreq_driver);
-}
-
-module_init(cbe_cpufreq_init);
-module_exit(cbe_cpufreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/arch/powerpc/platforms/cell/cbe_cpufreq.h
deleted file mode 100644
index c1d86bfa92ff..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * cbe_cpufreq.h
- *
- * This file contains the definitions used by the cbe_cpufreq driver.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- */
-
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode);
-int cbe_cpufreq_get_pmode(int cpu);
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
-extern bool cbe_cpufreq_has_pmi;
-#else
-#define cbe_cpufreq_has_pmi (0)
-#endif
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
deleted file mode 100644
index 20472e487b6f..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * pervasive backend for the cbe_cpufreq driver
- *
- * This driver makes use of the pervasive unit to
- * engage the desired frequency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/cell-regs.h>
-
-#include "cbe_cpufreq.h"
-
-/* to write to MIC register */
-static u64 MIC_Slow_Fast_Timer_table[] = {
-	[0 ... 7] = 0x007fc00000000000ull,
-};
-
-/* more values for the MIC */
-static u64 MIC_Slow_Next_Timer_table[] = {
-	0x0000240000000000ull,
-	0x0000268000000000ull,
-	0x000029C000000000ull,
-	0x00002D0000000000ull,
-	0x0000300000000000ull,
-	0x0000334000000000ull,
-	0x000039C000000000ull,
-	0x00003FC000000000ull,
-};
-
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode)
-{
-	struct cbe_pmd_regs __iomem *pmd_regs;
-	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
-	unsigned long flags;
-	u64 value;
-#ifdef DEBUG
-	long time;
-#endif
-
-	local_irq_save(flags);
-
-	mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu);
-	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
-
-#ifdef DEBUG
-	time = jiffies;
-#endif
-
-	out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]);
-	out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]);
-
-	out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]);
-	out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]);
-
-	value = in_be64(&pmd_regs->pmcr);
-	/* set bits to zero */
-	value &= 0xFFFFFFFFFFFFFFF8ull;
-	/* set bits to next pmode */
-	value |= pmode;
-
-	out_be64(&pmd_regs->pmcr, value);
-
-#ifdef DEBUG
-	/* wait until new pmode appears in status register */
-	value = in_be64(&pmd_regs->pmsr) & 0x07;
-	while (value != pmode) {
-		cpu_relax();
-		value = in_be64(&pmd_regs->pmsr) & 0x07;
-	}
-
-	time = jiffies  - time;
-	time = jiffies_to_msecs(time);
-	pr_debug("had to wait %lu ms for a transition using " \
-		 "pervasive unit\n", time);
-#endif
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-
-int cbe_cpufreq_get_pmode(int cpu)
-{
-	int ret;
-	struct cbe_pmd_regs __iomem *pmd_regs;
-
-	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
-	ret = in_be64(&pmd_regs->pmsr) & 0x07;
-
-	return ret;
-}
-
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
deleted file mode 100644
index 60a07a4f9326..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * pmi backend for the cbe_cpufreq driver
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#include <asm/processor.h>
-#include <asm/prom.h>
-#include <asm/pmi.h>
-#include <asm/cell-regs.h>
-
-#ifdef DEBUG
-#include <asm/time.h>
-#endif
-
-#include "cbe_cpufreq.h"
-
-static u8 pmi_slow_mode_limit[MAX_CBE];
-
-bool cbe_cpufreq_has_pmi = false;
-EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
-
-/*
- * hardware specific functions
- */
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode)
-{
-	int ret;
-	pmi_message_t pmi_msg;
-#ifdef DEBUG
-	long time;
-#endif
-	pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
-	pmi_msg.data1 =	cbe_cpu_to_node(cpu);
-	pmi_msg.data2 = pmode;
-
-#ifdef DEBUG
-	time = jiffies;
-#endif
-	pmi_send_message(pmi_msg);
-
-#ifdef DEBUG
-	time = jiffies  - time;
-	time = jiffies_to_msecs(time);
-	pr_debug("had to wait %lu ms for a transition using " \
-		 "PMI\n", time);
-#endif
-	ret = pmi_msg.data2;
-	pr_debug("PMI returned slow mode %d\n", ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
-
-
-static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
-{
-	u8 node, slow_mode;
-
-	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
-
-	node = pmi_msg.data1;
-	slow_mode = pmi_msg.data2;
-
-	pmi_slow_mode_limit[node] = slow_mode;
-
-	pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
-}
-
-static int pmi_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct cpufreq_frequency_table *cbe_freqs;
-	u8 node;
-
-	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
-	 * and CPUFREQ_NOTIFY policy events?)
-	 */
-	if (event == CPUFREQ_START)
-		return 0;
-
-	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
-	node = cbe_cpu_to_node(policy->cpu);
-
-	pr_debug("got notified, event=%lu, node=%u\n", event, node);
-
-	if (pmi_slow_mode_limit[node] != 0) {
-		pr_debug("limiting node %d to slow mode %d\n",
-			 node, pmi_slow_mode_limit[node]);
-
-		cpufreq_verify_within_limits(policy, 0,
-
-			cbe_freqs[pmi_slow_mode_limit[node]].frequency);
-	}
-
-	return 0;
-}
-
-static struct notifier_block pmi_notifier_block = {
-	.notifier_call = pmi_notifier,
-};
-
-static struct pmi_handler cbe_pmi_handler = {
-	.type			= PMI_TYPE_FREQ_CHANGE,
-	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
-};
-
-
-
-static int __init cbe_cpufreq_pmi_init(void)
-{
-	cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0;
-
-	if (!cbe_cpufreq_has_pmi)
-		return -ENODEV;
-
-	cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
-
-	return 0;
-}
-
-static void __exit cbe_cpufreq_pmi_exit(void)
-{
-	cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
-	pmi_unregister_handler(&cbe_pmi_handler);
-}
-
-module_init(cbe_cpufreq_pmi_init);
-module_exit(cbe_cpufreq_pmi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index 890f30e70f98..be1e7958909e 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -273,10 +273,9 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = policy->cur;
 	freqs.new = pas_freqs[pas_astate_new].frequency;
-	freqs.cpu = policy->cpu;
 
 	mutex_lock(&pas_switch_mutex);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
 		 policy->cpu,
@@ -288,7 +287,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 	for_each_online_cpu(i)
 		set_astate(i, pas_astate_new);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	mutex_unlock(&pas_switch_mutex);
 
 	ppc_proc_freq = freqs.new * 1000ul;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 311b804353b1..3104fad82480 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -335,7 +335,8 @@ static int pmu_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static int do_set_cpu_speed(int speed_mode, int notify)
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+		int notify)
 {
 	struct cpufreq_freqs freqs;
 	unsigned long l3cr;
@@ -343,13 +344,12 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 
 	freqs.old = cur_freq;
 	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-	freqs.cpu = smp_processor_id();
 
 	if (freqs.old == freqs.new)
 		return 0;
 
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	if (speed_mode == CPUFREQ_LOW &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
@@ -366,7 +366,7 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 			_set_L3CR(prev_l3cr);
 	}
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 
 	return 0;
@@ -393,7 +393,7 @@ static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
 			target_freq, relation, &newstate))
 		return -EINVAL;
 
-	rc = do_set_cpu_speed(newstate, 1);
+	rc = do_set_cpu_speed(policy, newstate, 1);
 
 	ppc_proc_freq = cur_freq * 1000ul;
 	return rc;
@@ -442,7 +442,7 @@ static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
 	no_schedule = 1;
 	sleep_freq = cur_freq;
 	if (cur_freq == low_freq && !is_pmu_based)
-		do_set_cpu_speed(CPUFREQ_HIGH, 0);
+		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
 	return 0;
 }
 
@@ -458,7 +458,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 	 * is that we force a switch to whatever it was, which is
 	 * probably high speed due to our suspend() routine
 	 */
-	do_set_cpu_speed(sleep_freq == low_freq ?
+	do_set_cpu_speed(policy, sleep_freq == low_freq ?
 			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 
 	ppc_proc_freq = cur_freq * 1000ul;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 9650c6029c82..7ba423431cfe 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -339,11 +339,10 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
 	freqs.new = g5_cpu_freqs[newstate].frequency;
-	freqs.cpu = 0;
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	rc = g5_switch_freq(newstate);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	mutex_unlock(&g5_switch_mutex);
 
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 4d806b419606..4644efa06941 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -23,8 +23,8 @@
 #include "pseries.h"
 
 struct cpuidle_driver pseries_idle_driver = {
-	.name =		"pseries_idle",
-	.owner =	THIS_MODULE,
+	.name             = "pseries_idle",
+	.owner            = THIS_MODULE,
 };
 
 #define MAX_IDLE_STATE_COUNT	2
@@ -33,10 +33,8 @@ static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
 static struct cpuidle_device __percpu *pseries_cpuidle_devices;
 static struct cpuidle_state *cpuidle_state_table;
 
-static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+static inline void idle_loop_prolog(unsigned long *in_purr)
 {
-
-	*kt_before = ktime_get();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -45,12 +43,10 @@ static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
 	get_lppaca()->idle = 1;
 }
 
-static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+static inline void idle_loop_epilog(unsigned long in_purr)
 {
 	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->idle = 0;
-
-	return ktime_to_us(ktime_sub(ktime_get(), kt_before));
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
@@ -58,10 +54,9 @@ static int snooze_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 	int cpu = dev->cpu;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -75,8 +70,8 @@ static int snooze_loop(struct cpuidle_device *dev,
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -102,9 +97,8 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 				int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	get_lppaca()->donate_dedicated_cpu = 1;
 
 	ppc64_runlatch_off();
@@ -112,8 +106,9 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 	check_and_cede_processor();
 
 	get_lppaca()->donate_dedicated_cpu = 0;
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -122,9 +117,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 
 	/*
 	 * Yield the processor to the hypervisor.  We return if
@@ -135,8 +129,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 	 */
 	check_and_cede_processor();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1ea597c6497a..78d8ace57272 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -622,25 +622,7 @@ config SH_CLK_CPG_LEGACY
 endmenu
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-	tristate "SuperH CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the cpufreq driver for SuperH. Any CPU that supports
-	  clock rate rounding through the clock framework can use this
-	  driver. While it will make the kernel slightly larger, this is
-	  harmless for CPUs that don't support rate rounding. The driver
-	  will also generate a notice in the boot log before disabling
-	  itself if the CPU in question is not capable of rate rounding.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If unsure, say N.
-
 endmenu
 
 source "arch/sh/drivers/Kconfig"
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index e14567a7e9a1..70ae0b2888ab 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -14,9 +14,9 @@ struct swsusp_arch_regs {
 void sh_mobile_call_standby(unsigned long mode);
 
 #ifdef CONFIG_CPU_IDLE
-void sh_mobile_setup_cpuidle(void);
+int sh_mobile_setup_cpuidle(void);
 #else
-static inline void sh_mobile_setup_cpuidle(void) {}
+static inline int sh_mobile_setup_cpuidle(void) { return 0; }
 #endif
 
 /* notifier chains for pre/post sleep hooks */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index f259b37874e9..261c8bfd75ce 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index 1ddc876d3b26..d30622592116 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -51,70 +51,53 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev,
 	return k;
 }
 
-static struct cpuidle_device cpuidle_dev;
 static struct cpuidle_driver cpuidle_driver = {
-	.name			= "sh_idle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
+	.name   = "sh_idle",
+	.owner  = THIS_MODULE,
+	.states = {
+		{
+			.exit_latency = 1,
+			.target_residency = 1 * 2,
+			.power_usage = 3,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C1",
+			.desc = "SuperH Sleep Mode",
+		},
+		{
+			.exit_latency = 100,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C2",
+			.desc = "SuperH Sleep Mode [SF]",
+			.disabled = true,
+		},
+		{
+			.exit_latency = 2300,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C3",
+			.desc = "SuperH Mobile Standby Mode [SF]",
+			.disabled = true,
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 3,
 };
 
-void sh_mobile_setup_cpuidle(void)
+int __init sh_mobile_setup_cpuidle(void)
 {
-	struct cpuidle_device *dev = &cpuidle_dev;
-	struct cpuidle_driver *drv = &cpuidle_driver;
-	struct cpuidle_state *state;
-	int i;
+	int ret;
 
+	if (sh_mobile_sleep_supported & SUSP_SH_SF)
+		cpuidle_driver.states[1].disabled = false;
 
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		drv->states[i].name[0] = '\0';
-		drv->states[i].desc[0] = '\0';
-	}
+	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
+		cpuidle_driver.states[2].disabled = false;
 
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &drv->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	state->enter = cpuidle_sleep_enter;
-
-	drv->safe_state_index = i-1;
-
-	if (sh_mobile_sleep_supported & SUSP_SH_SF) {
-		state = &drv->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
-		strncpy(state->desc, "SuperH Sleep Mode [SF]",
-			CPUIDLE_DESC_LEN);
-		state->exit_latency = 100;
-		state->target_residency = 1 * 2;
-		state->power_usage = 1;
-		state->flags = 0;
-		state->flags |= CPUIDLE_FLAG_TIME_VALID;
-		state->enter = cpuidle_sleep_enter;
-	}
-
-	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
-		state = &drv->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
-		strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
-			CPUIDLE_DESC_LEN);
-		state->exit_latency = 2300;
-		state->target_residency = 1 * 2;
-		state->power_usage = 1;
-		state->flags = 0;
-		state->flags |= CPUIDLE_FLAG_TIME_VALID;
-		state->enter = cpuidle_sleep_enter;
-	}
-
-	drv->state_count = i;
-	dev->state_count = i;
-
-	cpuidle_register_driver(&cpuidle_driver);
-
-	cpuidle_register_device(dev);
+	return cpuidle_register(&cpuidle_driver);
 }
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index 08d27fac8d08..ac37b7234f85 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -150,8 +150,7 @@ static const struct platform_suspend_ops sh_pm_ops = {
 static int __init sh_pm_init(void)
 {
 	suspend_set_ops(&sh_pm_ops);
-	sh_mobile_setup_cpuidle();
-	return 0;
+	return sh_mobile_setup_cpuidle();
 }
 
 late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
deleted file mode 100644
index e68b45b6f3f9..000000000000
--- a/arch/sh/kernel/cpufreq.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * arch/sh/kernel/cpufreq.c
- *
- * cpufreq driver for the SuperH processors.
- *
- * Copyright (C) 2002 - 2012 Paul Mundt
- * Copyright (C) 2002 M. R. Brown
- *
- * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
- *
- *   Copyright (C) 2004-2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "cpufreq: " fmt
-
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/cpumask.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/sched.h>	/* set_cpus_allowed() */
-#include <linux/clk.h>
-#include <linux/percpu.h>
-#include <linux/sh_clk.h>
-
-static DEFINE_PER_CPU(struct clk, sh_cpuclk);
-
-static unsigned int sh_cpufreq_get(unsigned int cpu)
-{
-	return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
-{
-	unsigned int cpu = policy->cpu;
-	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
-	struct device *dev;
-	long freq;
-
-	if (!cpu_online(cpu))
-		return -ENODEV;
-
-	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	BUG_ON(smp_processor_id() != cpu);
-
-	dev = get_cpu_device(cpu);
-
-	/* Convert target_freq from kHz to Hz */
-	freq = clk_round_rate(cpuclk, target_freq * 1000);
-
-	if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
-		return -EINVAL;
-
-	dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
-
-	freqs.cpu	= cpu;
-	freqs.old	= sh_cpufreq_get(cpu);
-	freqs.new	= (freq + 500) / 1000;
-	freqs.flags	= 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-	clk_set_rate(cpuclk, freq);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	dev_dbg(dev, "set frequency %lu Hz\n", freq);
-
-	return 0;
-}
-
-static int sh_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
-	struct cpufreq_frequency_table *freq_table;
-
-	freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
-	policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-	struct cpufreq_frequency_table *freq_table;
-	struct device *dev;
-
-	if (!cpu_online(cpu))
-		return -ENODEV;
-
-	dev = get_cpu_device(cpu);
-
-	cpuclk = clk_get(dev, "cpu_clk");
-	if (IS_ERR(cpuclk)) {
-		dev_err(dev, "couldn't get CPU clk\n");
-		return PTR_ERR(cpuclk);
-	}
-
-	policy->cur = policy->min = policy->max = sh_cpufreq_get(cpu);
-
-	freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
-	if (freq_table) {
-		int result;
-
-		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		if (!result)
-			cpufreq_frequency_table_get_attr(freq_table, cpu);
-	} else {
-		dev_notice(dev, "no frequency table found, falling back "
-			   "to rate rounding.\n");
-
-		policy->cpuinfo.min_freq =
-			(clk_round_rate(cpuclk, 1) + 500) / 1000;
-		policy->cpuinfo.max_freq =
-			(clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
-	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
-	       "Maximum %u.%03u MHz.\n",
-	       policy->min / 1000, policy->min % 1000,
-	       policy->max / 1000, policy->max % 1000);
-
-	return 0;
-}
-
-static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-
-	cpufreq_frequency_table_put_attr(cpu);
-	clk_put(cpuclk);
-
-	return 0;
-}
-
-static struct freq_attr *sh_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver sh_cpufreq_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "sh",
-	.get		= sh_cpufreq_get,
-	.target		= sh_cpufreq_target,
-	.verify		= sh_cpufreq_verify,
-	.init		= sh_cpufreq_cpu_init,
-	.exit		= sh_cpufreq_cpu_exit,
-	.attr		= sh_freq_attr,
-};
-
-static int __init sh_cpufreq_module_init(void)
-{
-	pr_notice("SuperH CPU frequency driver.\n");
-	return cpufreq_register_driver(&sh_cpufreq_driver);
-}
-
-static void __exit sh_cpufreq_module_exit(void)
-{
-	cpufreq_unregister_driver(&sh_cpufreq_driver);
-}
-
-module_init(sh_cpufreq_module_init);
-module_exit(sh_cpufreq_module_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("cpufreq driver for SuperH");
-MODULE_LICENSE("GPL");
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 66dc562950ae..e5641157464f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -254,29 +254,6 @@ config HOTPLUG_CPU
 
 if SPARC64
 source "drivers/cpufreq/Kconfig"
-
-config US3_FREQ
-	tristate "UltraSPARC-III CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-III processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config US2E_FREQ
-	tristate "UltraSPARC-IIe CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endif
 
 config US3_MC
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 6cf591b7e1c6..5276fd4e9d03 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI)        += pci_msi.o
 
 obj-$(CONFIG_COMPAT)         += sys32.o sys_sparc32.o signal32.o
 
-# sparc64 cpufreq
-obj-$(CONFIG_US3_FREQ)  += us3_cpufreq.o
-obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
 obj-$(CONFIG_US3_MC)    += chmc.o
 
 obj-$(CONFIG_KPROBES)   += kprobes.o
diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c
deleted file mode 100644
index 489fc15f3194..000000000000
--- a/arch/sparc/kernel/us2e_cpufreq.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/* us2e_cpufreq.c: UltraSPARC-IIe cpu frequency support
- *
- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
- *
- * Many thanks to Dominik Brodowski for fixing up the cpufreq
- * infrastructure in order to make this driver easier to implement.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/cpufreq.h>
-#include <linux/threads.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <asm/asi.h>
-#include <asm/timer.h>
-
-static struct cpufreq_driver *cpufreq_us2e_driver;
-
-struct us2e_freq_percpu_info {
-	struct cpufreq_frequency_table table[6];
-};
-
-/* Indexed by cpu number. */
-static struct us2e_freq_percpu_info *us2e_freq_table;
-
-#define HBIRD_MEM_CNTL0_ADDR	0x1fe0000f010UL
-#define HBIRD_ESTAR_MODE_ADDR	0x1fe0000f080UL
-
-/* UltraSPARC-IIe has five dividers: 1, 2, 4, 6, and 8.  These are controlled
- * in the ESTAR mode control register.
- */
-#define ESTAR_MODE_DIV_1	0x0000000000000000UL
-#define ESTAR_MODE_DIV_2	0x0000000000000001UL
-#define ESTAR_MODE_DIV_4	0x0000000000000003UL
-#define ESTAR_MODE_DIV_6	0x0000000000000002UL
-#define ESTAR_MODE_DIV_8	0x0000000000000004UL
-#define ESTAR_MODE_DIV_MASK	0x0000000000000007UL
-
-#define MCTRL0_SREFRESH_ENAB	0x0000000000010000UL
-#define MCTRL0_REFR_COUNT_MASK	0x0000000000007f00UL
-#define MCTRL0_REFR_COUNT_SHIFT	8
-#define MCTRL0_REFR_INTERVAL	7800
-#define MCTRL0_REFR_CLKS_P_CNT	64
-
-static unsigned long read_hbreg(unsigned long addr)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=&r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-	return ret;
-}
-
-static void write_hbreg(unsigned long addr, unsigned long val)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* no outputs */
-			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-	if (addr == HBIRD_ESTAR_MODE_ADDR) {
-		/* Need to wait 16 clock cycles for the PLL to lock.  */
-		udelay(1);
-	}
-}
-
-static void self_refresh_ctl(int enable)
-{
-	unsigned long mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
-
-	if (enable)
-		mctrl |= MCTRL0_SREFRESH_ENAB;
-	else
-		mctrl &= ~MCTRL0_SREFRESH_ENAB;
-	write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl);
-	(void) read_hbreg(HBIRD_MEM_CNTL0_ADDR);
-}
-
-static void frob_mem_refresh(int cpu_slowing_down,
-			     unsigned long clock_tick,
-			     unsigned long old_divisor, unsigned long divisor)
-{
-	unsigned long old_refr_count, refr_count, mctrl;
-
-	refr_count  = (clock_tick * MCTRL0_REFR_INTERVAL);
-	refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
-
-	mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
-	old_refr_count = (mctrl & MCTRL0_REFR_COUNT_MASK)
-		>> MCTRL0_REFR_COUNT_SHIFT;
-
-	mctrl &= ~MCTRL0_REFR_COUNT_MASK;
-	mctrl |= refr_count << MCTRL0_REFR_COUNT_SHIFT;
-	write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl);
-	mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR);
-
-	if (cpu_slowing_down && !(mctrl & MCTRL0_SREFRESH_ENAB)) {
-		unsigned long usecs;
-
-		/* We have to wait for both refresh counts (old
-		 * and new) to go to zero.
-		 */
-		usecs = (MCTRL0_REFR_CLKS_P_CNT *
-			 (refr_count + old_refr_count) *
-			 1000000UL *
-			 old_divisor) / clock_tick;
-		udelay(usecs + 1UL);
-	}
-}
-
-static void us2e_transition(unsigned long estar, unsigned long new_bits,
-			    unsigned long clock_tick,
-			    unsigned long old_divisor, unsigned long divisor)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	estar &= ~ESTAR_MODE_DIV_MASK;
-
-	/* This is based upon the state transition diagram in the IIe manual.  */
-	if (old_divisor == 2 && divisor == 1) {
-		self_refresh_ctl(0);
-		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
-		frob_mem_refresh(0, clock_tick, old_divisor, divisor);
-	} else if (old_divisor == 1 && divisor == 2) {
-		frob_mem_refresh(1, clock_tick, old_divisor, divisor);
-		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
-		self_refresh_ctl(1);
-	} else if (old_divisor == 1 && divisor > 2) {
-		us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick,
-				1, 2);
-		us2e_transition(estar, new_bits, clock_tick,
-				2, divisor);
-	} else if (old_divisor > 2 && divisor == 1) {
-		us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick,
-				old_divisor, 2);
-		us2e_transition(estar, new_bits, clock_tick,
-				2, divisor);
-	} else if (old_divisor < divisor) {
-		frob_mem_refresh(0, clock_tick, old_divisor, divisor);
-		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
-	} else if (old_divisor > divisor) {
-		write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits);
-		frob_mem_refresh(1, clock_tick, old_divisor, divisor);
-	} else {
-		BUG();
-	}
-
-	local_irq_restore(flags);
-}
-
-static unsigned long index_to_estar_mode(unsigned int index)
-{
-	switch (index) {
-	case 0:
-		return ESTAR_MODE_DIV_1;
-
-	case 1:
-		return ESTAR_MODE_DIV_2;
-
-	case 2:
-		return ESTAR_MODE_DIV_4;
-
-	case 3:
-		return ESTAR_MODE_DIV_6;
-
-	case 4:
-		return ESTAR_MODE_DIV_8;
-
-	default:
-		BUG();
-	}
-}
-
-static unsigned long index_to_divisor(unsigned int index)
-{
-	switch (index) {
-	case 0:
-		return 1;
-
-	case 1:
-		return 2;
-
-	case 2:
-		return 4;
-
-	case 3:
-		return 6;
-
-	case 4:
-		return 8;
-
-	default:
-		BUG();
-	}
-}
-
-static unsigned long estar_to_divisor(unsigned long estar)
-{
-	unsigned long ret;
-
-	switch (estar & ESTAR_MODE_DIV_MASK) {
-	case ESTAR_MODE_DIV_1:
-		ret = 1;
-		break;
-	case ESTAR_MODE_DIV_2:
-		ret = 2;
-		break;
-	case ESTAR_MODE_DIV_4:
-		ret = 4;
-		break;
-	case ESTAR_MODE_DIV_6:
-		ret = 6;
-		break;
-	case ESTAR_MODE_DIV_8:
-		ret = 8;
-		break;
-	default:
-		BUG();
-	}
-
-	return ret;
-}
-
-static unsigned int us2e_freq_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned long clock_tick, estar;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
-	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	return clock_tick / estar_to_divisor(estar);
-}
-
-static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
-{
-	unsigned long new_bits, new_freq;
-	unsigned long clock_tick, divisor, old_divisor, estar;
-	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
-
-	if (!cpu_online(cpu))
-		return;
-
-	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
-	new_bits = index_to_estar_mode(index);
-	divisor = index_to_divisor(index);
-	new_freq /= divisor;
-
-	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
-
-	old_divisor = estar_to_divisor(estar);
-
-	freqs.old = clock_tick / old_divisor;
-	freqs.new = new_freq;
-	freqs.cpu = cpu;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (old_divisor != divisor)
-		us2e_transition(estar, new_bits, clock_tick * 1000,
-				old_divisor, divisor);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-}
-
-static int us2e_freq_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	unsigned int new_index = 0;
-
-	if (cpufreq_frequency_table_target(policy,
-					   &us2e_freq_table[policy->cpu].table[0],
-					   target_freq, relation, &new_index))
-		return -EINVAL;
-
-	us2e_set_cpu_divider_index(policy->cpu, new_index);
-
-	return 0;
-}
-
-static int us2e_freq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-					      &us2e_freq_table[policy->cpu].table[0]);
-}
-
-static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
-	struct cpufreq_frequency_table *table =
-		&us2e_freq_table[cpu].table[0];
-
-	table[0].index = 0;
-	table[0].frequency = clock_tick / 1;
-	table[1].index = 1;
-	table[1].frequency = clock_tick / 2;
-	table[2].index = 2;
-	table[2].frequency = clock_tick / 4;
-	table[2].index = 3;
-	table[2].frequency = clock_tick / 6;
-	table[2].index = 4;
-	table[2].frequency = clock_tick / 8;
-	table[2].index = 5;
-	table[3].frequency = CPUFREQ_TABLE_END;
-
-	policy->cpuinfo.transition_latency = 0;
-	policy->cur = clock_tick;
-
-	return cpufreq_frequency_table_cpuinfo(policy, table);
-}
-
-static int us2e_freq_cpu_exit(struct cpufreq_policy *policy)
-{
-	if (cpufreq_us2e_driver)
-		us2e_set_cpu_divider_index(policy->cpu, 0);
-
-	return 0;
-}
-
-static int __init us2e_freq_init(void)
-{
-	unsigned long manuf, impl, ver;
-	int ret;
-
-	if (tlb_type != spitfire)
-		return -ENODEV;
-
-	__asm__("rdpr %%ver, %0" : "=r" (ver));
-	manuf = ((ver >> 48) & 0xffff);
-	impl  = ((ver >> 32) & 0xffff);
-
-	if (manuf == 0x17 && impl == 0x13) {
-		struct cpufreq_driver *driver;
-
-		ret = -ENOMEM;
-		driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL);
-		if (!driver)
-			goto err_out;
-
-		us2e_freq_table = kzalloc(
-			(NR_CPUS * sizeof(struct us2e_freq_percpu_info)),
-			GFP_KERNEL);
-		if (!us2e_freq_table)
-			goto err_out;
-
-		driver->init = us2e_freq_cpu_init;
-		driver->verify = us2e_freq_verify;
-		driver->target = us2e_freq_target;
-		driver->get = us2e_freq_get;
-		driver->exit = us2e_freq_cpu_exit;
-		driver->owner = THIS_MODULE,
-		strcpy(driver->name, "UltraSPARC-IIe");
-
-		cpufreq_us2e_driver = driver;
-		ret = cpufreq_register_driver(driver);
-		if (ret)
-			goto err_out;
-
-		return 0;
-
-err_out:
-		if (driver) {
-			kfree(driver);
-			cpufreq_us2e_driver = NULL;
-		}
-		kfree(us2e_freq_table);
-		us2e_freq_table = NULL;
-		return ret;
-	}
-
-	return -ENODEV;
-}
-
-static void __exit us2e_freq_exit(void)
-{
-	if (cpufreq_us2e_driver) {
-		cpufreq_unregister_driver(cpufreq_us2e_driver);
-		kfree(cpufreq_us2e_driver);
-		cpufreq_us2e_driver = NULL;
-		kfree(us2e_freq_table);
-		us2e_freq_table = NULL;
-	}
-}
-
-MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-IIe");
-MODULE_LICENSE("GPL");
-
-module_init(us2e_freq_init);
-module_exit(us2e_freq_exit);
diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c
deleted file mode 100644
index eb1624b931d9..000000000000
--- a/arch/sparc/kernel/us3_cpufreq.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* us3_cpufreq.c: UltraSPARC-III cpu frequency support
- *
- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
- *
- * Many thanks to Dominik Brodowski for fixing up the cpufreq
- * infrastructure in order to make this driver easier to implement.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/cpufreq.h>
-#include <linux/threads.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <asm/head.h>
-#include <asm/timer.h>
-
-static struct cpufreq_driver *cpufreq_us3_driver;
-
-struct us3_freq_percpu_info {
-	struct cpufreq_frequency_table table[4];
-};
-
-/* Indexed by cpu number. */
-static struct us3_freq_percpu_info *us3_freq_table;
-
-/* UltraSPARC-III has three dividers: 1, 2, and 32.  These are controlled
- * in the Safari config register.
- */
-#define SAFARI_CFG_DIV_1	0x0000000000000000UL
-#define SAFARI_CFG_DIV_2	0x0000000040000000UL
-#define SAFARI_CFG_DIV_32	0x0000000080000000UL
-#define SAFARI_CFG_DIV_MASK	0x00000000C0000000UL
-
-static unsigned long read_safari_cfg(void)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__("ldxa	[%%g0] %1, %0"
-			     : "=&r" (ret)
-			     : "i" (ASI_SAFARI_CONFIG));
-	return ret;
-}
-
-static void write_safari_cfg(unsigned long val)
-{
-	__asm__ __volatile__("stxa	%0, [%%g0] %1\n\t"
-			     "membar	#Sync"
-			     : /* no outputs */
-			     : "r" (val), "i" (ASI_SAFARI_CONFIG)
-			     : "memory");
-}
-
-static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
-{
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
-	unsigned long ret;
-
-	switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
-	case SAFARI_CFG_DIV_1:
-		ret = clock_tick / 1;
-		break;
-	case SAFARI_CFG_DIV_2:
-		ret = clock_tick / 2;
-		break;
-	case SAFARI_CFG_DIV_32:
-		ret = clock_tick / 32;
-		break;
-	default:
-		BUG();
-	}
-
-	return ret;
-}
-
-static unsigned int us3_freq_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned long reg;
-	unsigned int ret;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	reg = read_safari_cfg();
-	ret = get_current_freq(cpu, reg);
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	return ret;
-}
-
-static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
-{
-	unsigned long new_bits, new_freq, reg;
-	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
-
-	if (!cpu_online(cpu))
-		return;
-
-	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	new_freq = sparc64_get_clock_tick(cpu) / 1000;
-	switch (index) {
-	case 0:
-		new_bits = SAFARI_CFG_DIV_1;
-		new_freq /= 1;
-		break;
-	case 1:
-		new_bits = SAFARI_CFG_DIV_2;
-		new_freq /= 2;
-		break;
-	case 2:
-		new_bits = SAFARI_CFG_DIV_32;
-		new_freq /= 32;
-		break;
-
-	default:
-		BUG();
-	}
-
-	reg = read_safari_cfg();
-
-	freqs.old = get_current_freq(cpu, reg);
-	freqs.new = new_freq;
-	freqs.cpu = cpu;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	reg &= ~SAFARI_CFG_DIV_MASK;
-	reg |= new_bits;
-	write_safari_cfg(reg);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-}
-
-static int us3_freq_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	unsigned int new_index = 0;
-
-	if (cpufreq_frequency_table_target(policy,
-					   &us3_freq_table[policy->cpu].table[0],
-					   target_freq,
-					   relation,
-					   &new_index))
-		return -EINVAL;
-
-	us3_set_cpu_divider_index(policy->cpu, new_index);
-
-	return 0;
-}
-
-static int us3_freq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-					      &us3_freq_table[policy->cpu].table[0]);
-}
-
-static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
-	struct cpufreq_frequency_table *table =
-		&us3_freq_table[cpu].table[0];
-
-	table[0].index = 0;
-	table[0].frequency = clock_tick / 1;
-	table[1].index = 1;
-	table[1].frequency = clock_tick / 2;
-	table[2].index = 2;
-	table[2].frequency = clock_tick / 32;
-	table[3].index = 0;
-	table[3].frequency = CPUFREQ_TABLE_END;
-
-	policy->cpuinfo.transition_latency = 0;
-	policy->cur = clock_tick;
-
-	return cpufreq_frequency_table_cpuinfo(policy, table);
-}
-
-static int us3_freq_cpu_exit(struct cpufreq_policy *policy)
-{
-	if (cpufreq_us3_driver)
-		us3_set_cpu_divider_index(policy->cpu, 0);
-
-	return 0;
-}
-
-static int __init us3_freq_init(void)
-{
-	unsigned long manuf, impl, ver;
-	int ret;
-
-	if (tlb_type != cheetah && tlb_type != cheetah_plus)
-		return -ENODEV;
-
-	__asm__("rdpr %%ver, %0" : "=r" (ver));
-	manuf = ((ver >> 48) & 0xffff);
-	impl  = ((ver >> 32) & 0xffff);
-
-	if (manuf == CHEETAH_MANUF &&
-	    (impl == CHEETAH_IMPL ||
-	     impl == CHEETAH_PLUS_IMPL ||
-	     impl == JAGUAR_IMPL ||
-	     impl == PANTHER_IMPL)) {
-		struct cpufreq_driver *driver;
-
-		ret = -ENOMEM;
-		driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL);
-		if (!driver)
-			goto err_out;
-
-		us3_freq_table = kzalloc(
-			(NR_CPUS * sizeof(struct us3_freq_percpu_info)),
-			GFP_KERNEL);
-		if (!us3_freq_table)
-			goto err_out;
-
-		driver->init = us3_freq_cpu_init;
-		driver->verify = us3_freq_verify;
-		driver->target = us3_freq_target;
-		driver->get = us3_freq_get;
-		driver->exit = us3_freq_cpu_exit;
-		driver->owner = THIS_MODULE,
-		strcpy(driver->name, "UltraSPARC-III");
-
-		cpufreq_us3_driver = driver;
-		ret = cpufreq_register_driver(driver);
-		if (ret)
-			goto err_out;
-
-		return 0;
-
-err_out:
-		if (driver) {
-			kfree(driver);
-			cpufreq_us3_driver = NULL;
-		}
-		kfree(us3_freq_table);
-		us3_freq_table = NULL;
-		return ret;
-	}
-
-	return -ENODEV;
-}
-
-static void __exit us3_freq_exit(void)
-{
-	if (cpufreq_us3_driver) {
-		cpufreq_unregister_driver(cpufreq_us3_driver);
-		kfree(cpufreq_us3_driver);
-		cpufreq_us3_driver = NULL;
-		kfree(us3_freq_table);
-		us3_freq_table = NULL;
-	}
-}
-
-MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III");
-MODULE_LICENSE("GPL");
-
-module_init(us3_freq_init);
-module_exit(us3_freq_exit);
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
index fa497e0efe5a..607a72f2ae35 100644
--- a/arch/unicore32/kernel/Makefile
+++ b/arch/unicore32/kernel/Makefile
@@ -9,7 +9,6 @@ obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
 obj-$(CONFIG_MODULES)		+= ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
-obj-$(CONFIG_CPU_FREQ)		+= cpu-ucv2.o
 obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 
 # obj-y for architecture PKUnity v3
diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/arch/unicore32/kernel/cpu-ucv2.c
deleted file mode 100644
index 4a99f62584c7..000000000000
--- a/arch/unicore32/kernel/cpu-ucv2.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-
-#include <mach/hardware.h>
-
-static struct cpufreq_driver ucv2_driver;
-
-/* make sure that only the "userspace" governor is run
- * -- anything else wouldn't make sense on this platform, anyway.
- */
-int ucv2_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy,
-			policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int ucv2_getspeed(unsigned int cpu)
-{
-	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
-
-	if (cpu)
-		return 0;
-	return clk_get_rate(mclk)/1000;
-}
-
-static int ucv2_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	unsigned int cur = ucv2_getspeed(0);
-	struct cpufreq_freqs freqs;
-	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (!clk_set_rate(mclk, target_freq * 1000)) {
-		freqs.old = cur;
-		freqs.new = target_freq;
-		freqs.cpu = 0;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = ucv2_getspeed(0);
-	policy->min = policy->cpuinfo.min_freq = 250000;
-	policy->max = policy->cpuinfo.max_freq = 1000000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-static struct cpufreq_driver ucv2_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= ucv2_verify_speed,
-	.target		= ucv2_target,
-	.get		= ucv2_getspeed,
-	.init		= ucv2_cpu_init,
-	.name		= "UniCore-II",
-};
-
-static int __init ucv2_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&ucv2_driver);
-}
-
-arch_initcall(ucv2_cpufreq_init);
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 398f7cb1353d..8010ebc5705f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -185,6 +185,7 @@
 #define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
 #define X86_FEATURE_DTHERM	(7*32+ 7) /* Digital Thermal Sensor */
 #define X86_FEATURE_HW_PSTATE	(7*32+ 8) /* AMD HW-PState */
+#define X86_FEATURE_PROC_FEEDBACK (7*32+ 9) /* AMD ProcFeedbackInterface */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 66b5faffe14a..53a4e2744846 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -373,7 +373,6 @@ static int apm_cpu_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver apm_idle_driver = {
 	.name = "apm_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		{ /* entry 0 is for polling */ },
 		{ /* entry 1 is for APM idle */
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index ee8e9abc859f..d92b5dad15dd 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -39,8 +39,9 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
 		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
-		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
 		{ X86_FEATURE_HW_PSTATE,	CR_EDX, 7, 0x80000007, 0 },
+		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
+		{ X86_FEATURE_PROC_FEEDBACK,	CR_EDX,11, 0x80000007, 0 },
 		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
 		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
 		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },
author	Linus Torvalds	2013-04-30 15:21:02 -0700
committer	Linus Torvalds	2013-04-30 15:21:02 -0700
commit	3ed1c478eff8db80e234d5446cb378b503135888 (patch)
tree	e1c8e0f488ca49c49b5a31fe59add4254381dd4b /arch
parent	151173e8ce9b95bbbbd7eedb9035cfaffbdb7cb2 (diff)
parent	371deb9500831ad1afbf9ea00e373f650deaed2f (diff)