ARM: pxa: move plat-pxa to drivers/soc/

There are two drivers in arch/arm/plat-pxa: mfp and ssp. Both
of them should ideally not be needed at all, as there are
proper subsystems to replace them.

OTOH, they are self-contained and can simply be normal
SoC drivers, so move them over there to eliminate one more
of the plat-* directories.

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> (mach-pxa)
Acked-by: Lubomir Rintel <lkundrak@v3.sk> (mach-mmp)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

11 files changed, 4 insertions, 1013 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2e8091e2d8a8..eef8cbf20045 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -667,7 +667,6 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-oxnas/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
@@ -753,9 +752,6 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2391b8de5a5..206a900fc87c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -230,7 +230,6 @@ machine-$(CONFIG_PLAT_SPEAR)		+= spear
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
 plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 # The byte offset of the kernel image in RAM from the start of RAM.
diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h
index 75a4acb33b1b..6f3057987756 100644
--- a/arch/arm/mach-mmp/mfp.h
+++ b/arch/arm/mach-mmp/mfp.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_MACH_MFP_H
 #define __ASM_MACH_MFP_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 /*
  * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index dbb961fb570e..7e0879bd4102 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -13,6 +13,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
index 980145e7ee99..683a3ea5f154 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
index cdd830926d1c..81fec4fa5a0f 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA3XX_H
 #define __ASM_ARCH_MFP_PXA3XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 #define MFPR_BASE	(0x40e10000)
 
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
deleted file mode 100644
index 6f7a0a39c2b9..000000000000
--- a/arch/arm/plat-pxa/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-if PLAT_PXA
-
-config PXA_SSP
-	tristate
-	help
-	  Enable support for PXA2xx SSP ports
-
-endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
deleted file mode 100644
index 349ea0af8450..000000000000
--- a/arch/arm/plat-pxa/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for code common across different PXA processor families
-#
-ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
-
-obj-$(CONFIG_PXA3xx)		+= mfp.o
-obj-$(CONFIG_ARCH_MMP)		+= mfp.o
-
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
deleted file mode 100644
index 3accaa9ee781..000000000000
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/plat-pxa/include/plat/mfp.h
- *
- *   Common Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- */
-
-#ifndef __ASM_PLAT_MFP_H
-#define __ASM_PLAT_MFP_H
-
-#define mfp_to_gpio(m)	((m) % 256)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-
-	MFP_PIN_GPIO128,
-	MFP_PIN_GPIO129,
-	MFP_PIN_GPIO130,
-	MFP_PIN_GPIO131,
-	MFP_PIN_GPIO132,
-	MFP_PIN_GPIO133,
-	MFP_PIN_GPIO134,
-	MFP_PIN_GPIO135,
-	MFP_PIN_GPIO136,
-	MFP_PIN_GPIO137,
-	MFP_PIN_GPIO138,
-	MFP_PIN_GPIO139,
-	MFP_PIN_GPIO140,
-	MFP_PIN_GPIO141,
-	MFP_PIN_GPIO142,
-	MFP_PIN_GPIO143,
-	MFP_PIN_GPIO144,
-	MFP_PIN_GPIO145,
-	MFP_PIN_GPIO146,
-	MFP_PIN_GPIO147,
-	MFP_PIN_GPIO148,
-	MFP_PIN_GPIO149,
-	MFP_PIN_GPIO150,
-	MFP_PIN_GPIO151,
-	MFP_PIN_GPIO152,
-	MFP_PIN_GPIO153,
-	MFP_PIN_GPIO154,
-	MFP_PIN_GPIO155,
-	MFP_PIN_GPIO156,
-	MFP_PIN_GPIO157,
-	MFP_PIN_GPIO158,
-	MFP_PIN_GPIO159,
-	MFP_PIN_GPIO160,
-	MFP_PIN_GPIO161,
-	MFP_PIN_GPIO162,
-	MFP_PIN_GPIO163,
-	MFP_PIN_GPIO164,
-	MFP_PIN_GPIO165,
-	MFP_PIN_GPIO166,
-	MFP_PIN_GPIO167,
-	MFP_PIN_GPIO168,
-	MFP_PIN_GPIO169,
-	MFP_PIN_GPIO170,
-	MFP_PIN_GPIO171,
-	MFP_PIN_GPIO172,
-	MFP_PIN_GPIO173,
-	MFP_PIN_GPIO174,
-	MFP_PIN_GPIO175,
-	MFP_PIN_GPIO176,
-	MFP_PIN_GPIO177,
-	MFP_PIN_GPIO178,
-	MFP_PIN_GPIO179,
-	MFP_PIN_GPIO180,
-	MFP_PIN_GPIO181,
-	MFP_PIN_GPIO182,
-	MFP_PIN_GPIO183,
-	MFP_PIN_GPIO184,
-	MFP_PIN_GPIO185,
-	MFP_PIN_GPIO186,
-	MFP_PIN_GPIO187,
-	MFP_PIN_GPIO188,
-	MFP_PIN_GPIO189,
-	MFP_PIN_GPIO190,
-	MFP_PIN_GPIO191,
-
-	MFP_PIN_GPIO255 = 255,
-
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-	MFP_PIN_DF_nCS0_SM_nCS2,
-	MFP_PIN_DF_nCS1_SM_nCS3,
-	MFP_PIN_SM_nCS0,
-	MFP_PIN_SM_nCS1,
-	MFP_PIN_DF_WEn,
-	MFP_PIN_DF_REn,
-	MFP_PIN_DF_CLE_SM_OEn,
-	MFP_PIN_DF_ALE_SM_WEn,
-	MFP_PIN_DF_RDY0,
-	MFP_PIN_DF_RDY1,
-
-	MFP_PIN_SM_SCLK,
-	MFP_PIN_SM_BE0,
-	MFP_PIN_SM_BE1,
-	MFP_PIN_SM_ADV,
-	MFP_PIN_SM_ADVMUX,
-	MFP_PIN_SM_RDY,
-
-	MFP_PIN_MMC1_DAT7,
-	MFP_PIN_MMC1_DAT6,
-	MFP_PIN_MMC1_DAT5,
-	MFP_PIN_MMC1_DAT4,
-	MFP_PIN_MMC1_DAT3,
-	MFP_PIN_MMC1_DAT2,
-	MFP_PIN_MMC1_DAT1,
-	MFP_PIN_MMC1_DAT0,
-	MFP_PIN_MMC1_CMD,
-	MFP_PIN_MMC1_CLK,
-	MFP_PIN_MMC1_CD,
-	MFP_PIN_MMC1_WP,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	/* additional pins on MMP2 */
-	MFP_PIN_TWSI1_SCL,
-	MFP_PIN_TWSI1_SDA,
-	MFP_PIN_TWSI4_SCL,
-	MFP_PIN_TWSI4_SDA,
-	MFP_PIN_CLK_REQ,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_FLOAT		(0x4 << 21)
-#define MFP_PULL_MASK		(0x7 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x7)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by mfp_init()
- *
- * mfp_init_base() - accepts a virtual base for all MFPR registers and
- * initialize the MFP table to a default state
- *
- * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
- * represents a range of MFP pins from "start" to "end", with the offset
- * beginning at "offset", to define a single pin, let "end" = -1.
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-void __init mfp_init_base(void __iomem *mfpr_base);
-void __init mfp_init_addr(struct mfp_addr_map *map);
-
-/*
- * mfp_{read, write}()	- for direct read/write access to the MFPR register
- * mfp_config()		- for configuring a group of MFPR registers
- * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
- * mfp_config_run()	- configuring all run time  MFPR registers after resume
- */
-unsigned long mfp_read(int mfp);
-void mfp_write(int mfp, unsigned long mfpr_val);
-void mfp_config(unsigned long *mfp_cfgs, int num);
-void mfp_config_run(void);
-void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
-
-#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
deleted file mode 100644
index 17fc4f33f35b..000000000000
--- a/arch/arm/plat-pxa/mfp.c
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/plat-pxa/mfp.c
- *
- *   Multi-Function Pin Support
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <plat/mfp.h>
-
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
-
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- * MFPR_PULL_FLOAT	1         0        0
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
-#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
-
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base;
-
-struct mfp_pin {
-	unsigned long	config;		/* -1 for not configured */
-	unsigned long	mfpr_off;	/* MFPRxx Register offset */
-	unsigned long	mfpr_run;	/* Run-Mode Register Value */
-	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
-};
-
-static struct mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
-	MFPR_LPM_INPUT,
-	MFPR_LPM_DRIVE_LOW,
-	MFPR_LPM_DRIVE_HIGH,
-	MFPR_LPM_PULL_LOW,
-	MFPR_LPM_PULL_HIGH,
-	MFPR_LPM_FLOAT,
-	MFPR_LPM_INPUT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
-	MFPR_PULL_NONE,
-	MFPR_PULL_LOW,
-	MFPR_PULL_HIGH,
-	MFPR_PULL_BOTH,
-	MFPR_PULL_FLOAT,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
-	MFPR_EDGE_NONE,
-	MFPR_EDGE_RISE,
-	MFPR_EDGE_FALL,
-	MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off)			\
-	__raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val)		\
-	__raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p)	((p)->config != -1)
-
-/*
- * perform a read-back of any valid MFPR register to make sure the
- * previous writings are finished
- */
-static unsigned long mfpr_off_readback;
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
-
-static inline void __mfp_config_run(struct mfp_pin *p)
-{
-	if (mfp_configured(p))
-		mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct mfp_pin *p)
-{
-	if (mfp_configured(p)) {
-		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
-		if (mfpr_clr != p->mfpr_run)
-			mfpr_writel(p->mfpr_off, mfpr_clr);
-		if (p->mfpr_lpm != mfpr_clr)
-			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
-	}
-}
-
-void mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (i = 0; i < num; i++, mfp_cfgs++) {
-		unsigned long tmp, c = *mfp_cfgs;
-		struct mfp_pin *p;
-		int pin, af, drv, lpm, edge, pull;
-
-		pin = MFP_PIN(c);
-		BUG_ON(pin >= MFP_PIN_MAX);
-		p = &mfp_table[pin];
-
-		af  = MFP_AF(c);
-		drv = MFP_DS(c);
-		lpm = MFP_LPM_STATE(c);
-		edge = MFP_LPM_EDGE(c);
-		pull = MFP_PULL(c);
-
-		/* run-mode pull settings will conflict with MFPR bits of
-		 * low power mode state,  calculate mfpr_run and mfpr_lpm
-		 * individually if pull != MFP_PULL_NONE
-		 */
-		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
-		if (likely(pull == MFP_PULL_NONE)) {
-			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_lpm = p->mfpr_run;
-		} else {
-			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_run = tmp | mfpr_pull[pull];
-		}
-
-		p->config = c; __mfp_config_run(p);
-	}
-
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long mfp_read(int mfp)
-{
-	unsigned long val, flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	val = mfpr_readl(mfp_table[mfp].mfpr_off);
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
-	return val;
-}
-
-void mfp_write(int mfp, unsigned long val)
-{
-	unsigned long flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init mfp_init_base(void __iomem *mfpr_base)
-{
-	int i;
-
-	/* initialize the table with default - unconfigured */
-	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
-		mfp_table[i].config = -1;
-
-	mfpr_mmio_base = mfpr_base;
-}
-
-void __init mfp_init_addr(struct mfp_addr_map *map)
-{
-	struct mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	/* mfp offset for readback */
-	mfpr_off_readback = map[0].offset;
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_run = 0;
-			mfp_table[i].mfpr_lpm = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void mfp_config_lpm(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_lpm(p);
-}
-
-void mfp_config_run(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_run(p);
-}
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
deleted file mode 100644
index 563440315acd..000000000000
--- a/arch/arm/plat-pxa/ssp.c
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/ssp.c
- *
- *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
- *
- *  Copyright (C) 2003 Russell King.
- *  Copyright (C) 2003 Wolfson Microelectronics PLC
- *
- *  PXA2xx SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications and allows easy port setup for DMA access.
- *
- *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-
-#include <asm/irq.h>
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(pxa_ssp_request);
-
-struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
-				      const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->of_node == of_node && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(pxa_ssp_request_of);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(ssp->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL(pxa_ssp_free);
-
-#ifdef CONFIG_OF
-static const struct of_device_id pxa_ssp_of_ids[] = {
-	{ .compatible = "mrvl,pxa25x-ssp",	.data = (void *) PXA25x_SSP },
-	{ .compatible = "mvrl,pxa25x-nssp",	.data = (void *) PXA25x_NSSP },
-	{ .compatible = "mrvl,pxa27x-ssp",	.data = (void *) PXA27x_SSP },
-	{ .compatible = "mrvl,pxa3xx-ssp",	.data = (void *) PXA3xx_SSP },
-	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
-	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
-	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
-#endif
-
-static int pxa_ssp_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct ssp_device *ssp;
-	struct device *dev = &pdev->dev;
-
-	ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL)
-		return -ENOMEM;
-
-	ssp->dev = dev;
-
-	ssp->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(ssp->clk))
-		return PTR_ERR(ssp->clk);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(dev, "no memory resource defined\n");
-		return -ENODEV;
-	}
-
-	res = devm_request_mem_region(dev, res->start, resource_size(res),
-				      pdev->name);
-	if (res == NULL) {
-		dev_err(dev, "failed to request memory resource\n");
-		return -EBUSY;
-	}
-
-	ssp->phys_base = res->start;
-
-	ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
-	if (ssp->mmio_base == NULL) {
-		dev_err(dev, "failed to ioremap() registers\n");
-		return -ENODEV;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		dev_err(dev, "no IRQ resource defined\n");
-		return -ENODEV;
-	}
-
-	if (dev->of_node) {
-		const struct of_device_id *id =
-			of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
-		ssp->type = (int) id->data;
-	} else {
-		const struct platform_device_id *id =
-			platform_get_device_id(pdev);
-		ssp->type = (int) id->driver_data;
-
-		/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-		 * starts from 0, do a translation here
-		 */
-		ssp->port_id = pdev->id + 1;
-	}
-
-	ssp->use_count = 0;
-	ssp->of_node = dev->of_node;
-
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
-
-	platform_set_drvdata(pdev, ssp);
-
-	return 0;
-}
-
-static int pxa_ssp_remove(struct platform_device *pdev)
-{
-	struct ssp_device *ssp;
-
-	ssp = platform_get_drvdata(pdev);
-	if (ssp == NULL)
-		return -ENODEV;
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-
-	return 0;
-}
-
-static const struct platform_device_id ssp_id_table[] = {
-	{ "pxa25x-ssp",		PXA25x_SSP },
-	{ "pxa25x-nssp",	PXA25x_NSSP },
-	{ "pxa27x-ssp",		PXA27x_SSP },
-	{ "pxa3xx-ssp",		PXA3xx_SSP },
-	{ "pxa168-ssp",		PXA168_SSP },
-	{ "pxa910-ssp",		PXA910_SSP },
-	{ },
-};
-
-static struct platform_driver pxa_ssp_driver = {
-	.probe		= pxa_ssp_probe,
-	.remove		= pxa_ssp_remove,
-	.driver		= {
-		.name		= "pxa2xx-ssp",
-		.of_match_table	= of_match_ptr(pxa_ssp_of_ids),
-	},
-	.id_table	= ssp_id_table,
-};
-
-static int __init pxa_ssp_init(void)
-{
-	return platform_driver_register(&pxa_ssp_driver);
-}
-
-static void __exit pxa_ssp_exit(void)
-{
-	platform_driver_unregister(&pxa_ssp_driver);
-}
-
-arch_initcall(pxa_ssp_init);
-module_exit(pxa_ssp_exit);
-
-MODULE_DESCRIPTION("PXA SSP driver");
-MODULE_AUTHOR("Liam Girdwood");
-MODULE_LICENSE("GPL");