diff options
| author | Darren Stevens | 2018-08-19 21:21:55 +0100 |
|---|---|---|
| committer | Michael Ellerman | 2018-12-20 22:21:20 +1100 |
| commit | 68f211a4d1e5882e881bbb84b6505908dde5f625 (patch) | |
| tree | 1ac33496df5a7c37d83c89eec5b6c46ab1920c56 /arch | |
| parent | 49a502ea23bf9dec47f8f3c3960909ff409cd1bb (diff) | |
powerpc/pasemi: Add PCI initialisation for Nemo board.
The A-Eon Amigaone X1000's Nemo motherboard has an AMD SB600
connected to one of the PCI-e root ports on its PaSemi
Pwrficient 1628M SoC. Normally the SB600 southbridge would be
connected to a hidden PCI-e port on the system's northbridge,
and as a result doesn't fully comply with the PCI-e spec.
Add code to relax the PCI-e detection in both the root port
and the Linux kernel allowing on board devices to be detected.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/platforms/pasemi/pci.c | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index c3c64172482d..116c0fee6dd0 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -108,6 +108,61 @@ static int workaround_5945(struct pci_bus *bus, unsigned int devfn, return 1; } +#ifdef CONFIG_PPC_PASEMI_NEMO +#define PXP_ERR_CFG_REG 0x4 +#define PXP_IGNORE_PCIE_ERRORS 0x800 +#define SB600_BUS 5 + +static void sb600_set_flag(int bus) +{ + static void __iomem *iob_mapbase = NULL; + struct resource res; + struct device_node *dn; + int err; + + if (iob_mapbase == NULL) { + dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob"); + if (!dn) { + pr_crit("NEMO SB600 missing iob node\n"); + return; + } + + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + + if (err) { + pr_crit("NEMO SB600 missing resource\n"); + return; + } + + pr_info("NEMO SB600 IOB base %08llx\n",res.start); + + iob_mapbase = ioremap(res.start + 0x100, 0x94); + } + + if (iob_mapbase != NULL) { + if (bus == SB600_BUS) { + /* + * This is the SB600's bus, tell the PCI-e root port + * to allow non-zero devices to enumerate. + */ + out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) | PXP_IGNORE_PCIE_ERRORS); + } else { + /* + * Only scan device 0 on other busses + */ + out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) & ~PXP_IGNORE_PCIE_ERRORS); + } + } +} + +#else + +static void sb600_set_flag(int bus) +{ +} +#endif + static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { |