diff options
| author | Linus Torvalds | 2012-05-29 20:14:53 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2012-05-29 20:14:53 -0700 |
| commit | 731a7378b81c2f5fa88ca1ae20b83d548d5613dc (patch) | |
| tree | fce6b4b5373466ddd87944ffd1021f444ce1dff5 /arch | |
| parent | 87a5af24e54857e7b15c1f1b0468512ee65c94e3 (diff) | |
| parent | 61f5446169046c217a5479517edac3a890c3bee7 (diff) | |
Merge branch 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 trampoline rework from H. Peter Anvin:
"This code reworks all the "trampoline"/"realmode" code (various bits
that need to live in the first megabyte of memory, most but not all of
which runs in real mode at some point) in the kernel into a single
object. The main reason for doing this is that it eliminates the last
place in the kernel where we needed pages to be mapped RWX. This code
separates all that code into proper R/RW/RX pages."
Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot
code), and arch/x86/kernel/reboot.c (reboot code moved around in one
branch, modified in this one), and arch/x86/tools/relocs.c (mostly same
code came in earlier due to working around the ld bugs just before the
3.4 release).
Also remove stale x86-relocs entry from scripts/.gitignore as per Peter
Anvin.
* commit '61f5446169046c217a5479517edac3a890c3bee7': (36 commits)
x86, realmode: Move end signature into header.S
x86, relocs: When printing an error, say relative or absolute
x86, relocs: More relocations which may end up as absolute
x86, relocs: Workaround for binutils 2.22.52.0.1 section bug
xen-acpi-processor: Add missing #include <xen/xen.h>
acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c
x86, realmode: Change EFER to a single u64 field
x86, realmode: Move kernel/realmode.c to realmode/init.c
x86, realmode: Move not-common bits out of trampoline_common.S
x86, realmode: Mask out EFER.LMA when saving trampoline EFER
x86, realmode: Fix no cache bits test in reboot_32.S
x86, realmode: Make sure all generated files are listed in targets
x86, realmode: build fix: remove duplicate build
x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline
x86, realmode: fixes compilation issue in tboot.c
x86, realmode: move relocs from scripts/ to arch/x86/tools
x86, realmode: header for trampoline code
x86, realmode: flattened rm hierachy
x86, realmode: don't copy real_mode_header
x86, realmode: fix 64-bit wakeup sequence
...
Diffstat (limited to 'arch')
56 files changed, 767 insertions, 610 deletions
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild index 0e9dec6cadd1..e5287d8517aa 100644 --- a/arch/x86/Kbuild +++ b/arch/x86/Kbuild @@ -1,4 +1,3 @@ - obj-$(CONFIG_KVM) += kvm/ # Xen paravirtualization support @@ -7,6 +6,7 @@ obj-$(CONFIG_XEN) += xen/ # lguest paravirtualization support obj-$(CONFIG_LGUEST_GUEST) += lguest/ +obj-y += realmode/ obj-y += kernel/ obj-y += mm/ diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 610001d385dd..724aa441de7d 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -29,7 +29,6 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/mpspec.h> -#include <asm/trampoline.h> #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long @@ -118,7 +117,6 @@ static inline void acpi_disable_pci(void) extern int acpi_suspend_lowlevel(void); extern const unsigned char acpi_wakeup_code[]; -#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code))) /* early initialization routine */ extern void acpi_reserve_wakeup_memory(void); diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 7745b257f035..39bc5777211a 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -544,13 +544,16 @@ static inline void load_sp0(struct tss_struct *tss, * enable), so that any CPU's that boot up * after us can get the correct flags. */ -extern unsigned long mmu_cr4_features; +extern unsigned long mmu_cr4_features; +extern u32 *trampoline_cr4_features; static inline void set_in_cr4(unsigned long mask) { unsigned long cr4; mmu_cr4_features |= mask; + if (trampoline_cr4_features) + *trampoline_cr4_features = mmu_cr4_features; cr4 = read_cr4(); cr4 |= mask; write_cr4(cr4); @@ -561,6 +564,8 @@ static inline void clear_in_cr4(unsigned long mask) unsigned long cr4; mmu_cr4_features &= ~mask; + if (trampoline_cr4_features) + *trampoline_cr4_features = mmu_cr4_features; cr4 = read_cr4(); cr4 &= ~mask; write_cr4(cr4); diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h new file mode 100644 index 000000000000..fce3f4ae5bd6 --- /dev/null +++ b/arch/x86/include/asm/realmode.h @@ -0,0 +1,62 @@ +#ifndef _ARCH_X86_REALMODE_H +#define _ARCH_X86_REALMODE_H + +#include <linux/types.h> +#include <asm/io.h> + +/* This must match data at realmode.S */ +struct real_mode_header { + u32 text_start; + u32 ro_end; + /* SMP trampoline */ + u32 trampoline_start; + u32 trampoline_status; + u32 trampoline_header; +#ifdef CONFIG_X86_64 + u32 trampoline_pgd; +#endif + /* ACPI S3 wakeup */ +#ifdef CONFIG_ACPI_SLEEP + u32 wakeup_start; + u32 wakeup_header; +#endif + /* APM/BIOS reboot */ +#ifdef CONFIG_X86_32 + u32 machine_real_restart_asm; +#endif +}; + +/* This must match data at trampoline_32/64.S */ +struct trampoline_header { +#ifdef CONFIG_X86_32 + u32 start; + u16 gdt_pad; + u16 gdt_limit; + u32 gdt_base; +#else + u64 start; + u64 efer; + u32 cr4; +#endif +}; + +extern struct real_mode_header *real_mode_header; +extern unsigned char real_mode_blob_end[]; + +extern unsigned long init_rsp; +extern unsigned long initial_code; +extern unsigned long initial_gs; + +extern unsigned char real_mode_blob[]; +extern unsigned char real_mode_relocs[]; + +#ifdef CONFIG_X86_32 +extern unsigned char startup_32_smp[]; +extern unsigned char boot_gdt[]; +#else +extern unsigned char secondary_startup_64[]; +#endif + +extern void __init setup_real_mode(void); + +#endif /* _ARCH_X86_REALMODE_H */ diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h deleted file mode 100644 index feca3118a73b..000000000000 --- a/arch/x86/include/asm/trampoline.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_X86_TRAMPOLINE_H -#define _ASM_X86_TRAMPOLINE_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <asm/io.h> - -/* - * Trampoline 80x86 program as an array. These are in the init rodata - * segment, but that's okay, because we only care about the relative - * addresses of the symbols. - */ -extern const unsigned char x86_trampoline_start []; -extern const unsigned char x86_trampoline_end []; -extern unsigned char *x86_trampoline_base; - -extern unsigned long init_rsp; -extern unsigned long initial_code; -extern unsigned long initial_gs; - -extern void __init setup_trampolines(void); - -extern const unsigned char trampoline_data[]; -extern const unsigned char trampoline_status[]; - -#define TRAMPOLINE_SYM(x) \ - ((void *)(x86_trampoline_base + \ - ((const unsigned char *)(x) - x86_trampoline_start))) - -/* Address of the SMP trampoline */ -static inline unsigned long trampoline_address(void) -{ - return virt_to_phys(TRAMPOLINE_SYM(trampoline_data)); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_X86_TRAMPOLINE_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9bba5b79902b..8215e5652d97 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -35,7 +35,6 @@ obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-y += trampoline.o trampoline_$(BITS).o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o @@ -48,7 +47,6 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ obj-y += acpi/ obj-y += reboot.o -obj-$(CONFIG_X86_32) += reboot_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_PCI) += early-quirks.o diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index 6f35260bb3ef..163b22581472 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,14 +1,7 @@ -subdir- := realmode - obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) obj-y += cstate.o endif -$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin - -$(obj)/realmode/wakeup.bin: FORCE - $(Q)$(MAKE) $(build)=$(obj)/realmode - diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/kernel/acpi/realmode/.gitignore deleted file mode 100644 index 58f1f48a58f8..000000000000 --- a/arch/x86/kernel/acpi/realmode/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -wakeup.bin -wakeup.elf -wakeup.lds diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile deleted file mode 100644 index 6a564ac67ef5..000000000000 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ /dev/null @@ -1,59 +0,0 @@ -# -# arch/x86/kernel/acpi/realmode/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -always := wakeup.bin -targets := wakeup.elf wakeup.lds - -wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o - -# The link order of the video-*.o modules can matter. In particular, -# video-vga.o *must* be listed first, followed by video-vesa.o. -# Hardware-specific drivers should follow in the order they should be -# probed, and video-bios.o should typically be last. -wakeup-y += video-vga.o -wakeup-y += video-vesa.o -wakeup-y += video-bios.o - -targets += $(wakeup-y) - -bootsrc := $(src)/../../../boot - -# --------------------------------------------------------------------------- - -# How to compile the 16-bit code. Note we always compile for -march=i386, -# that way we can complain to the user if the CPU is insufficient. -# Compile with _SETUP since this is similar to the boot-time setup code. -KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ - -I$(srctree)/$(bootsrc) \ - $(cflags-y) \ - -Wall -Wstrict-prototypes \ - -march=i386 -mregparm=3 \ - -include $(srctree)/$(bootsrc)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ - $(call cc-option, -ffreestanding) \ - $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ - $(call cc-option, -fno-stack-protector) \ - $(call cc-option, -mpreferred-stack-boundary=2) -KBUILD_CFLAGS += $(call cc-option, -m32) -KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -GCOV_PROFILE := n - -WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) - -LDFLAGS_wakeup.elf := -T - -CPPFLAGS_wakeup.lds += -P -C - -$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE - $(call if_changed,ld) - -OBJCOPYFLAGS_wakeup.bin := -O binary - -$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE - $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S deleted file mode 100644 index f51eb0bb56ce..000000000000 --- a/arch/x86/kernel/acpi/realmode/bioscall.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/bioscall.S" diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S deleted file mode 100644 index dc59ebee69d8..000000000000 --- a/arch/x86/kernel/acpi/realmode/copy.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/copy.S" diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c deleted file mode 100644 index 6206033ba202..000000000000 --- a/arch/x86/kernel/acpi/realmode/regs.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/regs.c" diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c deleted file mode 100644 index 7deabc144a27..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-bios.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-bios.c" diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c deleted file mode 100644 index 328ad209f113..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-mode.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c deleted file mode 100644 index 9dbb9672226a..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-vesa.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vesa.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c deleted file mode 100644 index bcc81255f374..000000000000 --- a/arch/x86/kernel/acpi/realmode/video-vga.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S deleted file mode 100644 index d4f8010a5b1b..000000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ /dev/null @@ -1,62 +0,0 @@ -/* - * wakeup.ld - * - * Linker script for the real-mode wakeup code - */ -#undef i386 -#include "wakeup.h" - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(_start) - -SECTIONS -{ - . = 0; - .jump : { - *(.jump) - } = 0x90909090 - - . = WAKEUP_HEADER_OFFSET; - .header : { - *(.header) - } - - . = ALIGN(16); - .text : { - *(.text*) - } = 0x90909090 - - . = ALIGN(16); - .rodata : { - *(.rodata*) - } - - .videocards : { - video_cards = .; - *(.videocards) - video_cards_end = .; - } - - . = ALIGN(16); - .data : { - *(.data*) - } - - . = ALIGN(16); - .bss : { - __bss_start = .; - *(.bss) - __bss_end = .; - } - - .signature : { - *(.signature) - } - - _end = .; - - /DISCARD/ : { - *(.note*) - } -} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 146a49c763a4..95bf99de9058 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -14,8 +14,9 @@ #include <asm/desc.h> #include <asm/pgtable.h> #include <asm/cacheflush.h> +#include <asm/realmode.h> -#include "realmode/wakeup.h" +#include "../../realmode/rm/wakeup.h" #include "sleep.h" unsigned long acpi_realmode_flags; @@ -36,13 +37,9 @@ asmlinkage void acpi_enter_s3(void) */ int acpi_suspend_lowlevel(void) { - struct wakeup_header *header; - /* address in low memory of the wakeup routine. */ - char *acpi_realmode; + struct wakeup_header *header = + (struct wakeup_header *) __va(real_mode_header->wakeup_header); - acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code); - - header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET); if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; @@ -50,27 +47,6 @@ int acpi_suspend_lowlevel(void) header->video_mode = saved_video_mode; - header->wakeup_jmp_seg = acpi_wakeup_address >> 4; - - /* - * Set up the wakeup GDT. We set these up as Big Real Mode, - * that is, with limits set to 4 GB. At least the Lenovo - * Thinkpad X61 is known to need this for the video BIOS - * initialization quirk to work; this is likely to also - * be the case for other laptops or integrated video devices. - */ - - /* GDT[0]: GDT self-pointer */ - header->wakeup_gdt[0] = - (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)__pa(&header->wakeup_gdt) << 16); - /* GDT[1]: big real mode-like code segment */ - header->wakeup_gdt[1] = - GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); - /* GDT[2]: big real mode-like data segment */ - header->wakeup_gdt[2] = - GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); - #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -95,7 +71,6 @@ int acpi_suspend_lowlevel(void) header->pmode_cr3 = (u32)__pa(&initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = trampoline_address() >> 4; #ifdef CONFIG_SMP stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index d68677a2a010..5653a5791ec9 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,8 +2,8 @@ * Variables and functions used by the code in sleep.c */ -#include <asm/trampoline.h> #include <linux/linkage.h> +#include <asm/realmode.h> extern unsigned long saved_video_mode; extern long saved_magic; diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S deleted file mode 100644 index 63b8ab524f2c..000000000000 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Wrapper script for the realmode binary as a transport object - * before copying to low memory. - */ -#include <asm/page_types.h> - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .globl acpi_wakeup_code -acpi_wakeup_code: - .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" - .size acpi_wakeup_code, .-acpi_wakeup_code diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 51ff18616d50..c18f59d10101 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -14,7 +14,6 @@ #include <asm/sections.h> #include <asm/e820.h> #include <asm/page.h> -#include <asm/trampoline.h> #include <asm/apic.h> #include <asm/io_apic.h> #include <asm/bios_ebda.h> diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 3a3b779f41d3..037df57a99ac 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -24,7 +24,6 @@ #include <asm/sections.h> #include <asm/kdebug.h> #include <asm/e820.h> -#include <asm/trampoline.h> #include <asm/bios_ebda.h> static void __init zap_identity_mappings(void) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 463c9797ca6a..d42ab17b7397 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -274,10 +274,7 @@ num_subarch_entries = (. - subarch_entries) / 4 * If cpu hotplug is not supported then this code can go in init section * which will be freed later */ - __CPUINIT - -#ifdef CONFIG_SMP ENTRY(startup_32_smp) cld movl $(__BOOT_DS),%eax @@ -288,7 +285,7 @@ ENTRY(startup_32_smp) movl pa(stack_start),%ecx movl %eax,%ss leal -__PAGE_OFFSET(%ecx),%esp -#endif /* CONFIG_SMP */ + default_entry: /* diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7a40f2447321..94bf9cc2c7ee 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -139,10 +139,6 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) - /* Fixup trampoline */ - addq %rbp, trampoline_level4_pgt + 0(%rip) - addq %rbp, trampoline_level4_pgt + (511*8)(%rip) - /* Due to ENTRY(), sometimes the empty space gets filled with * zeros. Better take a jmp than relying on empty space being * filled with 0x90 (nop) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index fbca2e6223bf..d2b56489d70f 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -27,7 +27,6 @@ #include <asm/proto.h> #include <asm/bios_ebda.h> #include <asm/e820.h> -#include <asm/trampoline.h> #include <asm/setup.h> #include <asm/smp.h> diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 77215c23fba1..79c45af81604 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -24,6 +24,7 @@ #ifdef CONFIG_X86_32 # include <linux/ctype.h> # include <linux/mc146818rtc.h> +# include <asm/realmode.h> #else # include <asm/x86_init.h> #endif @@ -156,15 +157,10 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } -extern const unsigned char machine_real_restart_asm[]; -extern const u64 machine_real_restart_gdt[3]; - void machine_real_restart(unsigned int type) { - void *restart_va; - unsigned long restart_pa; - void (*restart_lowmem)(unsigned int); - u64 *lowmem_gdt; + void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int)) + real_mode_header->machine_real_restart_asm; local_irq_disable(); @@ -195,21 +191,6 @@ void machine_real_restart(unsigned int type) * too. */ *((unsigned short *)0x472) = reboot_mode; - /* Patch the GDT in the low memory trampoline */ - lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); - - restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); - restart_pa = virt_to_phys(restart_va); - restart_lowmem = (void (*)(unsigned int))restart_pa; - - /* GDT[0]: GDT self-pointer */ - lowmem_gdt[0] = - (u64)(sizeof(machine_real_restart_gdt) - 1) + - ((u64)virt_to_phys(lowmem_gdt) << 16); - /* GDT[1]: 64K real mode code segment */ - lowmem_gdt[1] = - GDT_ENTRY(0x009b, restart_pa, 0xffff); - /* Jump to the identity-mapped low memory code */ restart_lowmem(type); } diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 982e44f960db..16be6dc14db1 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -73,7 +73,7 @@ #include <asm/mtrr.h> #include <asm/apic.h> -#include <asm/trampoline.h> +#include <asm/realmode.h> #include <asm/e820.h> #include <asm/mpspec.h> #include <asm/setup.h> @@ -909,7 +909,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n", (max_pfn_mapped<<PAGE_SHIFT) - 1); - setup_trampolines(); + setup_real_mode(); init_gbpages(); @@ -968,6 +968,8 @@ void __init setup_arch(char **cmdline_p) if (boot_cpu_data.cpuid_level >= 0) { /* A CPU has %cr4 if and only if it has CPUID */ mmu_cr4_features = read_cr4(); + if (trampoline_cr4_features) + *trampoline_cr4_features = mmu_cr4_features; } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 433529e29be4..f56f96da77f5 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -57,7 +57,7 @@ #include <asm/nmi.h> #include <asm/irq.h> #include <asm/idle.h> -#include <asm/trampoline.h> +#include <asm/realmode.h> #include <asm/cpu.h> #include <asm/numa.h> #include <asm/pgtable.h> @@ -73,6 +73,8 @@ #include <asm/smpboot_hooks.h> #include <asm/i8259.h> +#include <asm/realmode.h> + /* State of each CPU */ DEFINE_PER_CPU(int, cpu_state) = { 0 }; @@ -660,8 +662,12 @@ static void __cpuinit announce_cpu(int cpu, int apicid) */ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) { + volatile u32 *trampoline_status = + (volatile u32 *) __va(real_mode_header->trampoline_status); + /* start_ip had better be page-aligned! */ + unsigned long start_ip = real_mode_header->trampoline_start; + unsigned long boot_error = 0; - unsigned long start_ip; int timeout; alternatives_smp_switch(1); @@ -684,9 +690,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) initial_code = (unsigned long)start_secondary; stack_start = idle->thread.sp; - /* start_ip had better be page-aligned! */ - start_ip = trampoline_address(); - /* So we see what's up */ announce_cpu(cpu, apicid); @@ -749,8 +752,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) pr_debug("CPU%d: has booted.\n", cpu); } else { boot_error = 1; - if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) - == 0xA5A5A5A5) + if (*trampoline_status == 0xA5A5A5A5) /* trampoline started but...? */ pr_err("CPU%d: Stuck ??\n", cpu); else @@ -776,7 +778,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) } /* mark "stuck" area as not stuck */ - *(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0; + *trampoline_status = 0; if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { /* diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index 6410744ac5cb..f84fe00fad48 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -32,7 +32,7 @@ #include <linux/mm.h> #include <linux/tboot.h> -#include <asm/trampoline.h> +#include <asm/realmode.h> #include <asm/processor.h> #include <asm/bootparam.h> #include <asm/pgtable.h> @@ -44,7 +44,7 @@ #include <asm/e820.h> #include <asm/io.h> -#include "acpi/realmode/wakeup.h" +#include "../realmode/rm/wakeup.h" /* Global pointer to shared data; NULL means no measured launch. */ struct tboot *tboot __read_mostly; @@ -201,7 +201,8 @@ static int tboot_setup_sleep(void) add_mac_region(e820.map[i].addr, e820.map[i].size); } - tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address; + tboot->acpi_sinfo.kernel_s3_resume_vector = + real_mode_header->wakeup_start; return 0; } diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c deleted file mode 100644 index a73b61055ad6..000000000000 --- a/arch/x86/kernel/trampoline.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <linux/io.h> -#include <linux/memblock.h> - -#include <asm/trampoline.h> -#include <asm/cacheflush.h> -#include <asm/pgtable.h> - -unsigned char *x86_trampoline_base; - -void __init setup_trampolines(void) -{ - phys_addr_t mem; - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); - if (!mem) - panic("Cannot allocate trampoline\n"); - - x86_trampoline_base = __va(mem); - memblock_reserve(mem, size); - - printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", - x86_trampoline_base, (unsigned long long)mem, size); - - memcpy(x86_trampoline_base, x86_trampoline_start, size); -} - -/* - * setup_trampolines() gets called very early, to guarantee the - * availability of low memory. This is before the proper kernel page - * tables are set up, so we cannot set page permissions in that - * function. Thus, we use an arch_initcall instead. - */ -static int __init configure_trampolines(void) -{ - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); - return 0; -} -arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S deleted file mode 100644 index 451c0a7ef7fd..000000000000 --- a/arch/x86/kernel/trampoline_32.S +++ /dev/null @@ -1,83 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * - * This is only used for booting secondary CPUs in SMP machine - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * We jump into arch/x86/kernel/head_32.S. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * If you work on this file, check the object module with - * objdump --reloc to make sure there are no relocation - * entries except for: - * - * TYPE VALUE - * R_386_32 startup_32_smp - * R_386_32 boot_gdt - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/segment.h> -#include <asm/page_types.h> - -#ifdef CONFIG_SMP - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .code16 - -ENTRY(trampoline_data) -r_base = . - wbinvd # Needed for NUMA-Q should be harmless for others - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - - cli # We should be safe anyway - - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - /* GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl boot_idt_descr - r_base # load idt with 0, 0 - lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S - ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) - - # These need to be in the same 64K segment as the above; - # hence we don't use the boot_gdt_descr defined in head.S -boot_gdt_descr: - .word __BOOT_DS + 7 # gdt limit - .long boot_gdt - __PAGE_OFFSET # gdt base - -boot_idt_descr: - .word 0 # idt limit = 0 - .long 0 # idt base = 0L - -ENTRY(trampoline_status) - .long 0 - -.globl trampoline_end -trampoline_end: - -#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 0f703f10901a..22a1530146a8 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -197,18 +197,6 @@ SECTIONS INIT_DATA_SECTION(16) - /* - * Code and data for a variety of lowlevel trampolines, to be - * copied into base memory (< 1 MiB) during initialization. - * Since it is copied early, the main copy can be discarded - * afterwards. - */ - .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { - x86_trampoline_start = .; - *(.x86_trampoline) - x86_trampoline_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) diff --git a/arch/x86/realmode/Makefile b/arch/x86/realmode/Makefile new file mode 100644 index 000000000000..94f7fbe97b08 --- /dev/null +++ b/arch/x86/realmode/Makefile @@ -0,0 +1,18 @@ +# +# arch/x86/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +subdir- := rm + +obj-y += init.o +obj-y += rmpiggy.o + +$(obj)/rmpiggy.o: $(obj)/rm/realmode.bin + +$(obj)/rm/realmode.bin: FORCE + $(Q)$(MAKE) $(build)=$(obj)/rm $@ diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c new file mode 100644 index 000000000000..cbca565af5bd --- /dev/null +++ b/arch/x86/realmode/init.c @@ -0,0 +1,115 @@ +#include <linux/io.h> +#include <linux/memblock.h> + +#include <asm/cacheflush.h> +#include <asm/pgtable.h> +#include <asm/realmode.h> + +struct real_mode_header *real_mode_header; +u32 *trampoline_cr4_features; + +void __init setup_real_mode(void) +{ + phys_addr_t mem; + u16 real_mode_seg; + u32 *rel; + u32 count; + u32 *ptr; + u16 *seg; + int i; + unsigned char *base; + struct trampoline_header *trampoline_header; + size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); +#ifdef CONFIG_X86_64 + u64 *trampoline_pgd; + u64 efer; +#endif + + /* Has to be in very low memory so we can execute real-mode AP code. */ + mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); + if (!mem) + panic("Cannot allocate trampoline\n"); + + base = __va(mem); + memblock_reserve(mem, size); + real_mode_header = (struct real_mode_header *) base; + printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", + base, (unsigned long long)mem, size); + + memcpy(base, real_mode_blob, size); + + real_mode_seg = __pa(base) >> 4; + rel = (u32 *) real_mode_relocs; + + /* 16-bit segment relocations. */ + count = rel[0]; + rel = &rel[1]; + for (i = 0; i < count; i++) { + seg = (u16 *) (base + rel[i]); + *seg = real_mode_seg; + } + + /* 32-bit linear relocations. */ + count = rel[i]; + rel = &rel[i + 1]; + for (i = 0; i < count; i++) { + ptr = (u32 *) (base + rel[i]); + *ptr += __pa(base); + } + + /* Must be perfomed *after* relocation. */ + trampoline_header = (struct trampoline_header *) + __va(real_mode_header->trampoline_header); + +#ifdef CONFIG_X86_32 + trampoline_header->start = __pa(startup_32_smp); + trampoline_header->gdt_limit = __BOOT_DS + 7; + trampoline_header->gdt_base = __pa(boot_gdt); +#else + /* + * Some AMD processors will #GP(0) if EFER.LMA is set in WRMSR + * so we need to mask it out. + */ + rdmsrl(MSR_EFER, efer); + trampoline_header->efer = efer & ~EFER_LMA; + + trampoline_header->start = (u64) secondary_startup_64; + trampoline_cr4_features = &trampoline_header->cr4; + *trampoline_cr4_features = read_cr4(); + + trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd); + trampoline_pgd[0] = __pa(level3_ident_pgt) + _KERNPG_TABLE; + trampoline_pgd[511] = __pa(level3_kernel_pgt) + _KERNPG_TABLE; +#endif +} + +/* + * set_real_mode_permissions() gets called very early, to guarantee the + * availability of low memory. This is before the proper kernel page + * tables are set up, so we cannot set page permissions in that + * function. Thus, we use an arch_initcall instead. + */ +static int __init set_real_mode_permissions(void) +{ + unsigned char *base = (unsigned char *) real_mode_header; + size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); + + size_t ro_size = + PAGE_ALIGN(real_mode_header->ro_end) - + __pa(base); + + size_t text_size = + PAGE_ALIGN(real_mode_header->ro_end) - + real_mode_header->text_start; + + unsigned long text_start = + (unsigned long) __va(real_mode_header->text_start); + + set_memory_nx((unsigned long) base, size >> PAGE_SHIFT); + set_memory_ro((unsigned long) base, ro_size >> PAGE_SHIFT); + set_memory_x((unsigned long) text_start, text_size >> PAGE_SHIFT); + + return 0; +} + +arch_initcall(set_real_mode_permissions); diff --git a/arch/x86/realmode/rm/.gitignore b/arch/x86/realmode/rm/.gitignore new file mode 100644 index 000000000000..b6ed3a2555cb --- /dev/null +++ b/arch/x86/realmode/rm/.gitignore @@ -0,0 +1,3 @@ +pasyms.h +realmode.lds +realmode.relocs diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile new file mode 100644 index 000000000000..5b84a2d30888 --- /dev/null +++ b/arch/x86/realmode/rm/Makefile @@ -0,0 +1,82 @@ +# +# arch/x86/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +always := realmode.bin realmode.relocs + +wakeup-objs := wakeup_asm.o wakemain.o video-mode.o +wakeup-objs += copy.o bioscall.o regs.o +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-objs += video-vga.o +wakeup-objs += video-vesa.o +wakeup-objs += video-bios.o + +realmode-y += header.o +realmode-y += trampoline_$(BITS).o +realmode-y += stack.o +realmode-$(CONFIG_X86_32) += reboot_32.o +realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs) + +targets += $(realmode-y) + +REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y)) + +sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p' + +quiet_cmd_pasyms = PASYMS $@ + cmd_pasyms = $(NM) $(filter-out FORCE,$^) | \ + sed $(sed-pasyms) | sort | uniq > $@ + +targets += pasyms.h +$(obj)/pasyms.h: $(REALMODE_OBJS) FORCE + $(call if_changed,pasyms) + +targets += realmode.lds +$(obj)/realmode.lds: $(obj)/pasyms.h + +LDFLAGS_realmode.elf := --emit-relocs -T +CPPFLAGS_realmode.lds += -P -C -I$(obj) + +targets += realmode.elf +$(obj)/realmode.elf: $(obj)/realmode.lds $(REALMODE_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_realmode.bin := -O binary + +targets += realmode.bin +$(obj)/realmode.bin: $(obj)/realmode.elf $(obj)/realmode.relocs + $(call if_changed,objcopy) + +quiet_cmd_relocs = RELOCS $@ + cmd_relocs = arch/x86/tools/relocs --realmode $< > $@ + +targets += realmode.relocs +$(obj)/realmode.relocs: $(obj)/realmode.elf FORCE + $(call if_changed,relocs) + +# --------------------------------------------------------------------------- + +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ + -I$(srctree)/arch/x86/boot \ + -DDISABLE_BRANCH_PROFILING \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(src)/../../boot/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n diff --git a/arch/x86/realmode/rm/bioscall.S b/arch/x86/realmode/rm/bioscall.S new file mode 100644 index 000000000000..16162d197918 --- /dev/null +++ b/arch/x86/realmode/rm/bioscall.S @@ -0,0 +1 @@ +#include "../../boot/bioscall.S" diff --git a/arch/x86/realmode/rm/copy.S b/arch/x86/realmode/rm/copy.S new file mode 100644 index 000000000000..b785e6f38fdd --- /dev/null +++ b/arch/x86/realmode/rm/copy.S @@ -0,0 +1 @@ +#include "../../boot/copy.S" diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S new file mode 100644 index 000000000000..fadf48378ada --- /dev/null +++ b/arch/x86/realmode/rm/header.S @@ -0,0 +1,41 @@ +/* + * Real-mode blob header; this should match realmode.h and be + * readonly; for mutable data instead add pointers into the .data + * or .bss sections as appropriate. + */ + +#include <linux/linkage.h> +#include <asm/page_types.h> + +#include "realmode.h" + + .section ".header", "a" + + .balign 16 +GLOBAL(real_mode_header) + .long pa_text_start + .long pa_ro_end + /* SMP trampoline */ + .long pa_trampoline_start + .long pa_trampoline_status + .long pa_trampoline_header +#ifdef CONFIG_X86_64 + .long pa_trampoline_pgd; +#endif + /* ACPI S3 wakeup */ +#ifdef CONFIG_ACPI_SLEEP + .long pa_wakeup_start + .long pa_wakeup_header +#endif + /* APM/BIOS reboot */ +#ifdef CONFIG_X86_32 + .long pa_machine_real_restart_asm +#endif +END(real_mode_header) + + /* End signature, used to verify integrity */ + .section ".signature","a" + .balign 4 +GLOBAL(end_signature) + .long REALMODE_END_SIGNATURE +END(end_signature) diff --git a/arch/x86/realmode/rm/realmode.h b/arch/x86/realmode/rm/realmode.h new file mode 100644 index 000000000000..d74cff6350ed --- /dev/null +++ b/arch/x86/realmode/rm/realmode.h @@ -0,0 +1,21 @@ +#ifndef ARCH_X86_REALMODE_RM_REALMODE_H +#define ARCH_X86_REALMODE_RM_REALMODE_H + +#ifdef __ASSEMBLY__ + +/* + * 16-bit ljmpw to the real_mode_seg + * + * This must be open-coded since gas will choke on using a + * relocatable symbol for the segment portion. + */ +#define LJMPW_RM(to) .byte 0xea ; .word (to), real_mode_seg + +#endif /* __ASSEMBLY__ */ + +/* + * Signature at the end of the realmode region + */ +#define REALMODE_END_SIGNATURE 0x65a22c82 + +#endif /* ARCH_X86_REALMODE_RM_REALMODE_H */ diff --git a/arch/x86/realmode/rm/realmode.lds.S b/arch/x86/realmode/rm/realmode.lds.S new file mode 100644 index 000000000000..86b2e8d6b1f1 --- /dev/null +++ b/arch/x86/realmode/rm/realmode.lds.S @@ -0,0 +1,76 @@ +/* + * realmode.lds.S + * + * Linker script for the real-mode code + */ + +#include <asm/page_types.h> + +#undef i386 + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) + +SECTIONS +{ + real_mode_seg = 0; + + . = 0; + .header : { + pa_real_mode_base = .; + *(.header) + } + + . = ALIGN(4); + .rodata : { + *(.rodata) + *(.rodata.*) + . = ALIGN(16); + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(PAGE_SIZE); + pa_text_start = .; + .text : { + *(.text) + *(.text.*) + } + + .text32 : { + *(.text32) + *(.text32.*) + } + + .text64 : { + *(.text64) + *(.text64.*) + } + pa_ro_end = .; + + . = ALIGN(PAGE_SIZE); + .data : { + *(.data) + *(.data.*) + } + + . = ALIGN(128); + .bss : { + *(.bss*) + } + + /* End signature for integrity checking */ + . = ALIGN(4); + .signature : { + *(.signature) + } + + /DISCARD/ : { + *(.note*) + *(.debug*) + *(.eh_frame*) + } + +#include "pasyms.h" +} diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/realmode/rm/reboot_32.S index 1d5c46df0d78..114044876b3d 100644 --- a/arch/x86/kernel/reboot_32.S +++ b/arch/x86/realmode/rm/reboot_32.S @@ -2,6 +2,7 @@ #include <linux/init.h> #include <asm/segment.h> #include <asm/page_types.h> +#include "realmode.h" /* * The following code and data reboots the machine by switching to real @@ -13,34 +14,20 @@ * * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. */ - .section ".x86_trampoline","a" - .balign 16 + .section ".text32", "ax" .code32 -ENTRY(machine_real_restart_asm) -r_base = . - /* Get our own relocated address */ - call 1f -1: popl %ebx - subl $(1b - r_base), %ebx - - /* Compute the equivalent real-mode segment */ - movl %ebx, %ecx - shrl $4, %ecx - - /* Patch post-real-mode segment jump */ - movw (dispatch_table - r_base)(%ebx,%eax,2),%ax - movw %ax, (101f - r_base)(%ebx) - movw %cx, (102f - r_base)(%ebx) + .balign 16 +ENTRY(machine_real_restart_asm) /* Set up the IDT for real mode. */ - lidtl (machine_real_restart_idt - r_base)(%ebx) + lidtl pa_machine_real_restart_idt /* * Set up a GDT from which we can load segment descriptors for real * mode. The GDT is not used in real mode; it is just needed here to * prepare the descriptors. */ - lgdtl (machine_real_restart_gdt - r_base)(%ebx) + lgdtl pa_machine_real_restart_gdt /* * Load the data segment registers with 16-bit compatible values @@ -51,7 +38,7 @@ r_base = . movl %ecx, %fs movl %ecx, %gs movl %ecx, %ss - ljmpl $8, $1f - r_base + ljmpw $8, $1f /* * This is 16-bit protected mode code to disable paging and the cache, @@ -76,27 +63,29 @@ r_base = . * * Most of this work is probably excessive, but it is what is tested. */ + .text .code16 + + .balign 16 +machine_real_restart_asm16: 1: xorl %ecx, %ecx - movl %cr0, %eax - andl $0x00000011, %eax - orl $0x60000000, %eax - movl %eax, %cr0 + movl %cr0, %edx + andl $0x00000011, %edx + orl $0x60000000, %edx + movl %edx, %cr0 movl %ecx, %cr3 movl %cr0, %edx - andl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + testl $0x60000000, %edx /* If no cache bits -> no wbinvd */ jz 2f wbinvd 2: - andb $0x10, %al - movl %eax, %cr0 - .byte 0xea /* ljmpw */ -101: .word 0 /* Offset */ -102: .word 0 /* Segment */ - -bios: - ljmpw $0xf000, $0xfff0 + andb $0x10, %dl + movl %edx, %cr0 + LJMPW_RM(3f) +3: + andw %ax, %ax + jz bios apm: movw $0x1000, %ax @@ -106,26 +95,34 @@ apm: movw $0x0001, %bx movw $0x0003, %cx int $0x15 + /* This should never return... */ -END(machine_real_restart_asm) +bios: + ljmpw $0xf000, $0xfff0 - .balign 16 - /* These must match <asm/reboot.h */ -dispatch_table: - .word bios - r_base - .word apm - r_base -END(dispatch_table) + .section ".rodata", "a" - .balign 16 -machine_real_restart_idt: + .balign 16 +GLOBAL(machine_real_restart_idt) .word 0xffff /* Length - real mode default value */ .long 0 /* Base - real mode default value */ END(machine_real_restart_idt) - .balign 16 -ENTRY(machine_real_restart_gdt) - .quad 0 /* Self-pointer, filled in by PM code */ - .quad 0 /* 16-bit code segment, filled in by PM code */ + .balign 16 +GLOBAL(machine_real_restart_gdt) + /* Self-pointer */ + .word 0xffff /* Length - real mode default value */ + .long pa_machine_real_restart_gdt + .word 0 + + /* + * 16-bit code segment pointing to real_mode_seg + * Selector value 8 + */ + .word 0xffff /* Limit */ + .long 0x9b000000 + pa_real_mode_base + .word 0 + /* * 16-bit data segment with the selector value 16 = 0x10 and * base value 0x100; since this is consistent with real mode diff --git a/arch/x86/realmode/rm/regs.c b/arch/x86/realmode/rm/regs.c new file mode 100644 index 000000000000..fbb15b9f9ca9 --- /dev/null +++ b/arch/x86/realmode/rm/regs.c @@ -0,0 +1 @@ +#include "../../boot/regs.c" diff --git a/arch/x86/realmode/rm/stack.S b/arch/x86/realmode/rm/stack.S new file mode 100644 index 000000000000..867ae87adfae --- /dev/null +++ b/arch/x86/realmode/rm/stack.S @@ -0,0 +1,19 @@ +/* + * Common heap and stack allocations + */ + +#include <linux/linkage.h> + + .data +GLOBAL(HEAP) + .long rm_heap +GLOBAL(heap_end) + .long rm_stack + + .bss + .balign 16 +GLOBAL(rm_heap) + .space 2048 +GLOBAL(rm_stack) + .space 2048 +GLOBAL(rm_stack_end) diff --git a/arch/x86/realmode/rm/trampoline_32.S b/arch/x86/realmode/rm/trampoline_32.S new file mode 100644 index 000000000000..c1b2791183e7 --- /dev/null +++ b/arch/x86/realmode/rm/trampoline_32.S @@ -0,0 +1,74 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * + * This is only used for booting secondary CPUs in SMP machine + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * We jump into arch/x86/kernel/head_32.S. + * + * On entry to trampoline_start, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, we load CS to the physical segment + * of the real mode code before doing anything further. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/segment.h> +#include <asm/page_types.h> +#include "realmode.h" + + .text + .code16 + + .balign PAGE_SIZE +ENTRY(trampoline_start) + wbinvd # Needed for NUMA-Q should be harmless for others + + LJMPW_RM(1f) +1: + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + + cli # We should be safe anyway + + movl tr_start, %eax # where we need to go + + movl $0xA5A5A5A5, trampoline_status + # write marker for master knows we're running + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + lidtl tr_idt # load idt with 0, 0 + lgdtl tr_gdt # load gdt with whatever is appropriate + + movw $1, %dx # protected mode (PE) bit + lmsw %dx # into protected mode + + ljmpl $__BOOT_CS, $pa_startup_32 + + .section ".text32","ax" + .code32 +ENTRY(startup_32) # note: also used from wakeup_asm.S + jmp *%eax + + .bss + .balign 8 +GLOBAL(trampoline_header) + tr_start: .space 4 + tr_gdt_pad: .space 2 + tr_gdt: .space 6 +END(trampoline_header) + +#include "trampoline_common.S" diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S index 09ff51799e96..bb360dc39d21 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/realmode/rm/trampoline_64.S @@ -5,12 +5,12 @@ * 4 Jan 1997 Michael Chastain: changed to gnu as. * 15 Sept 2005 Eric Biederman: 64bit PIC support * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the * trampoline page to make our stack and everything else * is a mystery. * - * On entry to trampoline_data, the processor is in real mode + * On entry to trampoline_start, the processor is in real mode * with 16-bit addressing and 16-bit data. CS has some value * and IP is zero. Thus, data addresses need to be absolute * (no relocation) and are taken with regard to r_base. @@ -31,43 +31,33 @@ #include <asm/msr.h> #include <asm/segment.h> #include <asm/processor-flags.h> +#include "realmode.h" - .section ".x86_trampoline","a" - .balign PAGE_SIZE + .text .code16 -ENTRY(trampoline_data) -r_base = . + .balign PAGE_SIZE +ENTRY(trampoline_start) cli # We should be safe anyway wbinvd + + LJMPW_RM(1f) +1: mov %cs, %ax # Code and data in the same place mov %ax, %ds mov %ax, %es mov %ax, %ss + movl $0xA5A5A5A5, trampoline_status + # write marker for master knows we're running - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - # Setup stack - movw $(trampoline_stack_end - r_base), %sp + # Setup stack + movl $rm_stack_end, %esp call verify_cpu # Verify the cpu supports long mode testl %eax, %eax # Check for return code jnz no_longmode - mov %cs, %ax - movzx %ax, %esi # Find the 32bit trampoline location - shll $4, %esi - - # Fixup the absolute vectors - leal (startup_32 - r_base)(%esi), %eax - movl %eax, startup_32_vector - r_base - leal (startup_64 - r_base)(%esi), %eax - movl %eax, startup_64_vector - r_base - leal (tgdt - r_base)(%esi), %eax - movl %eax, (tgdt + 2 - r_base) - /* * GDT tables in non default location kernel can be beyond 16MB and * lgdt will not be able to load the address as in real mode default @@ -75,36 +65,49 @@ r_base = . * to 32 bit. */ - lidtl tidt - r_base # load idt with 0, 0 - lgdtl tgdt - r_base # load gdt with whatever is appropriate + lidtl tr_idt # load idt with 0, 0 + lgdtl tr_gdt # load gdt with whatever is appropriate + + movw $__KERNEL_DS, %dx # Data segment descriptor - mov $X86_CR0_PE, %ax # protected mode (PE) bit - lmsw %ax # into protected mode + # Enable protected mode + movl $X86_CR0_PE, %eax # protected mode (PE) bit + movl %eax, %cr0 # into protected mode # flush prefetch and jump to startup_32 - ljmpl *(startup_32_vector - r_base) + ljmpl $__KERNEL32_CS, $pa_startup_32 +no_longmode: + hlt + jmp no_longmode +#include "../kernel/verify_cpu.S" + + .section ".text32","ax" .code32 .balign 4 -startup_32: - movl $__KERNEL_DS, %eax # Initialize the %ds segment register - movl %eax, %ds - - movl $X86_CR4_PAE, %eax +ENTRY(startup_32) + movl %edx, %ss + addl $pa_real_mode_base, %esp + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + + movl pa_tr_cr4, %eax movl %eax, %cr4 # Enable PAE mode - # Setup trampoline 4 level pagetables - leal (trampoline_level4_pgt - r_base)(%esi), %eax + # Setup trampoline 4 level pagetables + movl $pa_trampoline_pgd, %eax movl %eax, %cr3 + # Set up EFER + movl pa_tr_efer, %eax + movl pa_tr_efer + 4, %edx movl $MSR_EFER, %ecx - movl $(1 << _EFER_LME), %eax # Enable Long Mode - xorl %edx, %edx wrmsr # Enable paging and in turn activate Long Mode - # Enable protected mode - movl $(X86_CR0_PG | X86_CR0_PE), %eax + movl $(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax movl %eax, %cr0 /* @@ -113,59 +116,38 @@ startup_32: * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use * the new gdt/idt that has __KERNEL_CS with CS.L = 1. */ - ljmp *(startup_64_vector - r_base)(%esi) + ljmpl $__KERNEL_CS, $pa_startup_64 + .section ".text64","ax" .code64 .balign 4 -startup_64: +ENTRY(startup_64) # Now jump into the kernel using virtual addresses - movq $secondary_startup_64, %rax - jmp *%rax - - .code16 -no_longmode: - hlt - jmp no_longmode -#include "verify_cpu.S" - - .balign 4 - # Careful these need to be in the same 64K segment as the above; -tidt: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L + jmpq *tr_start(%rip) + .section ".rodata","a" # Duplicate the global descriptor table # so the kernel can live anywhere - .balign 4 -tgdt: - .short tgdt_end - tgdt # gdt limit - .long tgdt - r_base - .short 0 + .balign 16 + .globl tr_gdt +tr_gdt: + .short tr_gdt_end - tr_gdt - 1 # gdt limit + .long pa_tr_gdt + .short 0 .quad 0x00cf9b000000ffff # __KERNEL32_CS .quad 0x00af9b000000ffff # __KERNEL_CS .quad 0x00cf93000000ffff # __KERNEL_DS -tgdt_end: +tr_gdt_end: - .balign 4 -startup_32_vector: - .long startup_32 - r_base - .word __KERNEL32_CS, 0 + .bss + .balign PAGE_SIZE +GLOBAL(trampoline_pgd) .space PAGE_SIZE - .balign 4 -startup_64_vector: - .long startup_64 - r_base - .word __KERNEL_CS, 0 + .balign 8 +GLOBAL(trampoline_header) + tr_start: .space 8 + GLOBAL(tr_efer) .space 8 + GLOBAL(tr_cr4) .space 4 +END(trampoline_header) - .balign 4 -ENTRY(trampoline_status) - .long 0 - -trampoline_stack: - .org 0x1000 -trampoline_stack_end: -ENTRY(trampoline_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(trampoline_end) +#include "trampoline_common.S" diff --git a/arch/x86/realmode/rm/trampoline_common.S b/arch/x86/realmode/rm/trampoline_common.S new file mode 100644 index 000000000000..b1ecdb9692ad --- /dev/null +++ b/arch/x86/realmode/rm/trampoline_common.S @@ -0,0 +1,7 @@ + .section ".rodata","a" + .balign 16 +tr_idt: .fill 1, 6, 0 + + .bss + .balign 4 +GLOBAL(trampoline_status) .space 4 diff --git a/arch/x86/realmode/rm/video-bios.c b/arch/x86/realmode/rm/video-bios.c new file mode 100644 index 000000000000..848b25aaf11b --- /dev/null +++ b/arch/x86/realmode/rm/video-bios.c @@ -0,0 +1 @@ +#include "../../boot/video-bios.c" diff --git a/arch/x86/realmode/rm/video-mode.c b/arch/x86/realmode/rm/video-mode.c new file mode 100644 index 000000000000..2a98b7e2368b --- /dev/null +++ b/arch/x86/realmode/rm/video-mode.c @@ -0,0 +1 @@ +#include "../../boot/video-mode.c" diff --git a/arch/x86/realmode/rm/video-vesa.c b/arch/x86/realmode/rm/video-vesa.c new file mode 100644 index 000000000000..413edddb51e5 --- /dev/null +++ b/arch/x86/realmode/rm/video-vesa.c @@ -0,0 +1 @@ +#include "../../boot/video-vesa.c" diff --git a/arch/x86/realmode/rm/video-vga.c b/arch/x86/realmode/rm/video-vga.c new file mode 100644 index 000000000000..3085f5c9d288 --- /dev/null +++ b/arch/x86/realmode/rm/video-vga.c @@ -0,0 +1 @@ +#include "../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/realmode/rm/wakemain.c index 883962d9eef2..91405d515ec6 100644 --- a/arch/x86/kernel/acpi/realmode/wakemain.c +++ b/arch/x86/realmode/rm/wakemain.c @@ -65,7 +65,8 @@ void main(void) { /* Kill machine if structures are wrong */ if (wakeup_header.real_magic != 0x12345678) - while (1); + while (1) + ; if (wakeup_header.realmode_flags & 4) send_morse("...-"); diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/realmode/rm/wakeup.h index 97a29e1430e3..9317e0042f24 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/realmode/rm/wakeup.h @@ -12,9 +12,8 @@ /* This must match data at wakeup.S */ struct wakeup_header { u16 video_mode; /* Video mode number */ - u16 _jmp1; /* ljmpl opcode, 32-bit only */ u32 pmode_entry; /* Protected mode resume point, 32-bit only */ - u16 _jmp2; /* CS value, 32-bit only */ + u16 pmode_cs; u32 pmode_cr0; /* Protected mode cr0 */ u32 pmode_cr3; /* Protected mode cr3 */ u32 pmode_cr4; /* Protected mode cr4 */ @@ -26,12 +25,6 @@ struct wakeup_header { u32 pmode_behavior; /* Wakeup routine behavior flags */ u32 realmode_flags; u32 real_magic; - u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ - u8 _pad1; - u8 wakeup_jmp; - u16 wakeup_jmp_off; - u16 wakeup_jmp_seg; - u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); @@ -40,7 +33,6 @@ extern struct wakeup_header wakeup_header; #define WAKEUP_HEADER_OFFSET 8 #define WAKEUP_HEADER_SIGNATURE 0x51ee1111 -#define WAKEUP_END_SIGNATURE 0x65a22c82 /* Wakeup behavior bits */ #define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/realmode/rm/wakeup_asm.S index b4fd836e4053..8905166b0bbb 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/realmode/rm/wakeup_asm.S @@ -1,50 +1,47 @@ /* * ACPI wakeup real mode startup stub */ +#include <linux/linkage.h> #include <asm/segment.h> #include <asm/msr-index.h> #include <asm/page_types.h> #include <asm/pgtable_types.h> #include <asm/processor-flags.h> +#include "realmode.h" #include "wakeup.h" .code16 - .section ".jump", "ax" - .globl _start -_start: - cli - jmp wakeup_code /* This should match the structure in wakeup.h */ - .section ".header", "a" - .globl wakeup_header -wakeup_header: -video_mode: .short 0 /* Video mode number */ -pmode_return: .byte 0x66, 0xea /* ljmpl */ - .long 0 /* offset goes here */ - .short __KERNEL_CS -pmode_cr0: .long 0 /* Saved %cr0 */ -pmode_cr3: .long 0 /* Saved %cr3 */ -pmode_cr4: .long 0 /* Saved %cr4 */ -pmode_efer: .quad 0 /* Saved EFER */ -pmode_gdt: .quad 0 -pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ -pmode_behavior: .long 0 /* Wakeup behavior flags */ -realmode_flags: .long 0 -real_magic: .long 0 -trampoline_segment: .word 0 -_pad1: .byte 0 -wakeup_jmp: .byte 0xea /* ljmpw */ -wakeup_jmp_off: .word 3f -wakeup_jmp_seg: .word 0 -wakeup_gdt: .quad 0, 0, 0 -signature: .long WAKEUP_HEADER_SIGNATURE + .section ".data", "aw" + + .balign 16 +GLOBAL(wakeup_header) + video_mode: .short 0 /* Video mode number */ + pmode_entry: .long 0 + pmode_cs: .short __KERNEL_CS + pmode_cr0: .long 0 /* Saved %cr0 */ + pmode_cr3: .long 0 /* Saved %cr3 */ + pmode_cr4: .long 0 /* Saved %cr4 */ + pmode_efer: .quad 0 /* Saved EFER */ + pmode_gdt: .quad 0 + pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ + pmode_behavior: .long 0 /* Wakeup behavior flags */ + realmode_flags: .long 0 + real_magic: .long 0 + signature: .long WAKEUP_HEADER_SIGNATURE +END(wakeup_header) .text .code16 -wakeup_code: + + .balign 16 +ENTRY(wakeup_start) + cli cld + LJMPW_RM(3f) +3: /* Apparently some dimwit BIOS programmers don't know how to program a PM to RM transition, and we might end up here with junk in the data segment descriptor registers. The only way @@ -54,8 +51,7 @@ wakeup_code: movl %cr0, %eax orb $X86_CR0_PE, %al movl %eax, %cr0 - jmp 1f -1: ljmpw $8, $2f + ljmpw $8, $2f 2: movw %cx, %ds movw %cx, %es @@ -65,16 +61,18 @@ wakeup_code: andb $~X86_CR0_PE, %al movl %eax, %cr0 - jmp wakeup_jmp + LJMPW_RM(3f) 3: /* Set up segments */ movw %cs, %ax + movw %ax, %ss + movl $rm_stack_end, %esp movw %ax, %ds movw %ax, %es - movw %ax, %ss - lidtl wakeup_idt + movw %ax, %fs + movw %ax, %gs - movl $wakeup_stack_end, %esp + lidtl wakeup_idt /* Clear the EFLAGS */ pushl $0 @@ -87,7 +85,7 @@ wakeup_code: /* Check we really have everything... */ movl end_signature, %eax - cmpl $WAKEUP_END_SIGNATURE, %eax + cmpl $REALMODE_END_SIGNATURE, %eax jne bogus_real_magic /* Call the C code */ @@ -128,14 +126,13 @@ wakeup_code: lgdtl pmode_gdt /* This really couldn't... */ - movl pmode_cr0, %eax - movl %eax, %cr0 - jmp pmode_return + movl pmode_entry, %eax + movl pmode_cr0, %ecx + movl %ecx, %cr0 + ljmpl $__KERNEL_CS, $pa_startup_32 + /* -> jmp *%eax in trampoline_32.S */ #else - pushw $0 - pushw trampoline_segment - pushw $0 - lret + jmp trampoline_start #endif bogus_real_magic: @@ -143,28 +140,38 @@ bogus_real_magic: hlt jmp 1b - .data + .section ".rodata","a" + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + + .balign 16 +GLOBAL(wakeup_gdt) + .word 3*8-1 /* Self-descriptor */ + .long pa_wakeup_gdt + .word 0 + + .word 0xffff /* 16-bit code segment @ real_mode_base */ + .long 0x9b000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + + .word 0xffff /* 16-bit data segment @ real_mode_base */ + .long 0x93000000 + pa_real_mode_base + .word 0x008f /* big real mode */ +END(wakeup_gdt) + + .section ".rodata","a" .balign 8 /* This is the standard real-mode IDT */ -wakeup_idt: + .balign 16 +GLOBAL(wakeup_idt) .word 0xffff /* limit */ .long 0 /* address */ .word 0 - - .globl HEAP, heap_end -HEAP: - .long wakeup_heap -heap_end: - .long wakeup_stack - - .bss -wakeup_heap: - .space 2048 -wakeup_stack: - .space 2048 -wakeup_stack_end: - - .section ".signature","a" -end_signature: - .long WAKEUP_END_SIGNATURE +END(wakeup_idt) diff --git a/arch/x86/realmode/rmpiggy.S b/arch/x86/realmode/rmpiggy.S new file mode 100644 index 000000000000..204c6ece0e97 --- /dev/null +++ b/arch/x86/realmode/rmpiggy.S @@ -0,0 +1,20 @@ +/* + * Wrapper script for the realmode binary as a transport object + * before copying to low memory. + */ +#include <linux/linkage.h> +#include <asm/page_types.h> + + .section ".init.data","aw" + + .balign PAGE_SIZE + +GLOBAL(real_mode_blob) + .incbin "arch/x86/realmode/rm/realmode.bin" +END(real_mode_blob) + +GLOBAL(real_mode_blob_end); + +GLOBAL(real_mode_relocs) + .incbin "arch/x86/realmode/rm/realmode.relocs" +END(real_mode_relocs) diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index b685296d4464..5a1847d61930 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -78,6 +78,13 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = { static const char * const sym_regex_realmode[S_NSYMTYPES] = { /* + * These symbols are known to be relative, even if the linker marks them + * as absolute (typically defined outside any section in the linker script.) + */ + [S_REL] = + "^pa_", + +/* * These are 16-bit segment symbols when compiling 16-bit code. */ [S_SEG] = |