diff options
| author | Linus Torvalds | 2014-10-08 17:37:16 -0400 |
|---|---|---|
| committer | Linus Torvalds | 2014-10-08 17:37:16 -0400 |
| commit | 8b45bc892e6842115fc87c2b2a3b86a20617606a (patch) | |
| tree | 636c804eb29bb97070e7d2bc4d5ab9d1dad27cac /arch | |
| parent | eb785bef684f2b7d03b530efc8e6f199e9777e2f (diff) | |
| parent | fa637bf0595ee1796d728a0d33b6b7fff12e1f3d (diff) | |
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are changes for drivers that are intimately tied to some SoC and
for some reason could not get merged through the respective subsystem
maintainer tree.
Most of the new code is for the Keystone Navigator driver, which is
new base support that is going to be needed for their hardware
accelerated network driver and other units.
Most of the commits are for moving old code around from at91 and omap
for things that are done in device drivers nowadays.
- at91: move reset, poweroff, memory and clocksource code into
drivers directories
- socfpga: add edac driver (through arm-soc, as requested by Boris)
- omap: move omap-intc code to drivers/irqchip
- sunxi: added an RTC driver for sun6i
- omap: mailbox driver related changes
- keystone: support for the "Navigator" component
- versatile: new reboot, led and soc drivers"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
bus: arm-ccn: Fix spurious warning message
leds: add device tree bindings for register bit LEDs
soc: add driver for the ARM RealView
power: reset: driver for the Versatile syscon reboot
leds: add a driver for syscon-based LEDs
drivers/soc: ti: fix build break with modules
MAINTAINERS: Add Keystone Multicore Navigator drivers entry
soc: ti: add Keystone Navigator DMA support
Documentation: dt: soc: add Keystone Navigator DMA bindings
soc: ti: add Keystone Navigator QMSS driver
Documentation: dt: soc: add Keystone Navigator QMSS bindings
rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
rtc: sun6i: Add sun6i RTC driver
irqchip: omap-intc: remove unnecessary comments
irqchip: omap-intc: correct maximum number or MIR registers
irqchip: omap-intc: enable TURBO idle mode
irqchip: omap-intc: enable IP protection
irqchip: omap-intc: remove unnecesary of_address_to_resource() call
irqchip: omap-intc: comment style cleanup
irqchip: omap-intc: minor improvement to omap_irq_pending()
...
Diffstat (limited to 'arch')
60 files changed, 359 insertions, 1251 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9e7d45571cd5..abe530f70296 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -133,10 +133,9 @@ }; intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,am33xx-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <128>; reg = <0x48200000 0x1000>; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 8f8c07da4ac1..59d1c297bb30 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -75,7 +75,6 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <96>; reg = <0x480FE000 0x1000>; }; diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 21baec154b78..b604d26bd48c 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -6,3 +6,10 @@ model = "Nokia N810"; compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; }; + +&i2c2 { + aic3x@18 { + compatible = "tlv320aic3x"; + reg = <0x18>; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 89608b206519..24c50db2a478 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -27,6 +27,12 @@ &i2c1 { clock-frequency = <400000>; + + pmic@72 { + compatible = "menelaus"; + reg = <0x72>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 226f3631c230..d0e884d3a737 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -141,10 +141,9 @@ }; intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,omap3-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <96>; reg = <0x48200000 0x1000>; }; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 1947a09e5a3f..0e6d548b70d9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -36,17 +36,6 @@ config OLD_IRQ_AT91 select MULTI_IRQ_HANDLER select SPARSE_IRQ -config AT91_SAM9_ALT_RESET - bool - default !ARCH_AT91X40 - -config AT91_SAM9G45_RESET - bool - default !ARCH_AT91X40 - -config AT91_SAM9_TIME - bool - config HAVE_AT91_SMD bool @@ -55,18 +44,20 @@ config HAVE_AT91_H32MX config SOC_AT91SAM9 bool - select AT91_SAM9_TIME select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MEMORY if USE_OF + select ATMEL_SDRAMC if USE_OF config SOC_SAMA5 bool - select AT91_SAM9_TIME select ATMEL_AIC5_IRQ select CPU_V7 select GENERIC_CLOCKEVENTS select USE_OF + select MEMORY + select ATMEL_SDRAMC menu "Atmel AT91 System-on-Chip" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 603365e44ed5..ac99d87ffefe 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -9,9 +9,6 @@ obj- := obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o -obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o -obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h deleted file mode 100644 index a600e6992920..000000000000 --- a/arch/arm/mach-at91/at91_rstc.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rstc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Reset Controller (RSTC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RSTC_H -#define AT91_RSTC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_rstc_base; - -#define at91_rstc_read(field) \ - __raw_readl(at91_rstc_base + field) - -#define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field) -#else -.extern at91_rstc_base -#endif - -#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ -#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ -#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -#define AT91_RSTC_RSTTYP_USER (4 << 8) -#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ - -#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ -#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ - -#endif diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h deleted file mode 100644 index 9e29f31ec9a6..000000000000 --- a/arch/arm/mach-at91/at91_shdwc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_shdwc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Shutdown Controller (SHDWC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SHDWC_H -#define AT91_SHDWC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_shdwc_base; - -#define at91_shdwc_read(field) \ - __raw_readl(at91_shdwc_base + field) - -#define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field) -#endif - -#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ -#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ -#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */ -#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ -#define AT91_SHDW_WKMODE0_NONE 0 -#define AT91_SHDW_WKMODE0_HIGH 1 -#define AT91_SHDW_WKMODE0_LOW 2 -#define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0_(x) ((x) << 4) -#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ -#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */ - -#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ -#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ -#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - -#endif diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 3477ba94c4c5..aab1f969a7c3 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -24,7 +25,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -342,8 +342,6 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); @@ -354,7 +352,6 @@ static void __init at91sam9260_ioremap_registers(void) static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); @@ -362,6 +359,45 @@ static void __init at91sam9260_initialize(void) at91_gpio_init(at91sam9260_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_RSTC, + .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_BASE_SDRAMC, + .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SHDWC, + .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9260_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -404,6 +440,11 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9260_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, @@ -411,5 +452,7 @@ AT91_SOC_START(at91sam9260) | (1 << AT91SAM9260_ID_IRQ2), .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, + .register_devices = at91sam9260_register_devices, .init = at91sam9260_initialize, + .init_time = at91sam9260_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fb164a5d04a9..a8bd35963332 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -301,8 +301,6 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); @@ -313,7 +311,6 @@ static void __init at91sam9261_ioremap_registers(void) static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); @@ -321,6 +318,45 @@ static void __init at91sam9261_initialize(void) at91_gpio_init(at91sam9261_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_RSTC, + .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_BASE_SDRAMC, + .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SHDWC, + .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9261_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -363,6 +399,11 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9261_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, @@ -370,5 +411,7 @@ AT91_SOC_START(at91sam9261) | (1 << AT91SAM9261_ID_IRQ2), .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, + .register_devices = at91sam9261_register_devices, .init = at91sam9261_initialize, + .init_time = at91sam9261_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 810fa5f15a51..fbff228cc63e 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -22,7 +23,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -321,8 +321,6 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); @@ -335,7 +333,6 @@ static void __init at91sam9263_ioremap_registers(void) static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); @@ -344,6 +341,45 @@ static void __init at91sam9263_initialize(void) at91_gpio_init(at91sam9263_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_RSTC, + .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_BASE_SDRAMC0, + .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SHDWC, + .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9263_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -386,11 +422,18 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; +static void __init at91sam9263_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, + .register_devices = at91sam9263_register_devices, .init = at91sam9263_initialize, + .init_time = at91sam9263_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c deleted file mode 100644 index 0a9e2fc8f796..000000000000 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x - * - * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France - * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France - * Converted to ClockSource/ClockEvents by David Brownell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <mach/hardware.h> - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) -#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) - -static u32 pit_cycle; /* write-once */ -static u32 pit_cnt; /* access only w/system irq blocked */ -static void __iomem *pit_base_addr __read_mostly; -static struct clk *mck; - -static inline unsigned int pit_read(unsigned int reg_offset) -{ - return __raw_readl(pit_base_addr + reg_offset); -} - -static inline void pit_write(unsigned int reg_offset, unsigned long value) -{ - __raw_writel(value, pit_base_addr + reg_offset); -} - -/* - * Clocksource: just a monotonic counter of MCK/16 cycles. - * We don't care whether or not PIT irqs are enabled. - */ -static cycle_t read_pit_clk(struct clocksource *cs) -{ - unsigned long flags; - u32 elapsed; - u32 t; - - raw_local_irq_save(flags); - elapsed = pit_cnt; - t = pit_read(AT91_PIT_PIIR); - raw_local_irq_restore(flags); - - elapsed += PIT_PICNT(t) * pit_cycle; - elapsed += PIT_CPIV(t); - return elapsed; -} - -static struct clocksource pit_clk = { - .name = "pit", - .rating = 175, - .read = read_pit_clk, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - -/* - * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) - */ -static void -pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* update clocksource counter */ - pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR)); - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN - | AT91_PIT_PITIEN); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq, leaving the clocksource active */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static void at91sam926x_pit_suspend(struct clock_event_device *cedev) -{ - /* Disable timer */ - pit_write(AT91_PIT_MR, 0); -} - -static void at91sam926x_pit_reset(void) -{ - /* Disable timer and irqs */ - pit_write(AT91_PIT_MR, 0); - - /* Clear any pending interrupts, wait for PIT to stop counting */ - while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) - cpu_relax(); - - /* Start PIT but don't enable IRQ */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); -} - -static void at91sam926x_pit_resume(struct clock_event_device *cedev) -{ - at91sam926x_pit_reset(); -} - -static struct clock_event_device pit_clkevt = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, - .rating = 100, - .set_mode = pit_clkevt_mode, - .suspend = at91sam926x_pit_suspend, - .resume = at91sam926x_pit_resume, -}; - - -/* - * IRQ handler for the timer. - */ -static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) -{ - /* - * irqs should be disabled here, but as the irq is shared they are only - * guaranteed to be off if the timer irq is registered first. - */ - WARN_ON_ONCE(!irqs_disabled()); - - /* The PIT interrupt may be disabled, and is shared */ - if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) - && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) { - unsigned nr_ticks; - - /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR)); - do { - pit_cnt += pit_cycle; - pit_clkevt.event_handler(&pit_clkevt); - nr_ticks--; - } while (nr_ticks); - - return IRQ_HANDLED; - } - - return IRQ_NONE; -} - -static struct irqaction at91sam926x_pit_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_pit_interrupt, - .irq = NR_IRQS_LEGACY + AT91_ID_SYS, -}; - -#ifdef CONFIG_OF -static struct of_device_id pit_timer_ids[] = { - { .compatible = "atmel,at91sam9260-pit" }, - { /* sentinel */ } -}; - -static int __init of_at91sam926x_pit_init(void) -{ - struct device_node *np; - int ret; - - np = of_find_matching_node(NULL, pit_timer_ids); - if (!np) - goto err; - - pit_base_addr = of_iomap(np, 0); - if (!pit_base_addr) - goto node_err; - - mck = of_clk_get(np, 0); - - /* Get the interrupts property */ - ret = irq_of_parse_and_map(np, 0); - if (!ret) { - pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); - if (!IS_ERR(mck)) - clk_put(mck); - goto ioremap_err; - } - at91sam926x_pit_irq.irq = ret; - - of_node_put(np); - - return 0; - -ioremap_err: - iounmap(pit_base_addr); -node_err: - of_node_put(np); -err: - return -EINVAL; -} -#else -static int __init of_at91sam926x_pit_init(void) -{ - return -EINVAL; -} -#endif - -/* - * Set up both clocksource and clockevent support. - */ -void __init at91sam926x_pit_init(void) -{ - unsigned long pit_rate; - unsigned bits; - int ret; - - mck = ERR_PTR(-ENOENT); - - /* For device tree enabled device: initialize here */ - of_at91sam926x_pit_init(); - - /* - * Use our actual MCK to figure out how many MCK/16 ticks per - * 1/HZ period (instead of a compile-time constant LATCH). - */ - if (IS_ERR(mck)) - mck = clk_get(NULL, "mck"); - - if (IS_ERR(mck)) - panic("AT91: PIT: Unable to get mck clk\n"); - pit_rate = clk_get_rate(mck) / 16; - pit_cycle = (pit_rate + HZ/2) / HZ; - WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); - - /* Initialize and enable the timer */ - at91sam926x_pit_reset(); - - /* - * Register clocksource. The high order bits of PIV are unused, - * so this isn't a 32-bit counter unless we get clockevent irqs. - */ - bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; - pit_clk.mask = CLOCKSOURCE_MASK(bits); - clocksource_register_hz(&pit_clk, pit_rate); - - /* Set up irq handler */ - ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq); - if (ret) - pr_crit("AT91: PIT: Unable to setup IRQ\n"); - - /* Set up and register clockevents */ - pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); - pit_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&pit_clkevt); -} - -void __init at91sam926x_ioremap_pit(u32 addr) -{ -#if defined(CONFIG_OF) - struct device_node *np = - of_find_matching_node(NULL, pit_timer_ids); - - if (np) { - of_node_put(np); - return; - } -#endif - pit_base_addr = ioremap(addr, 16); - - if (!pit_base_addr) - panic("Impossible to ioremap PIT\n"); -} diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S deleted file mode 100644 index f039538d3bdb..000000000000 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * reset AT91SAM9G20 as per errata - * - * (C) BitBox Ltd 2010 - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - - .arm - - .globl at91sam9_alt_restart - -at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants - ldr r0, [r0] - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access - str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b . diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9d45496e4932..405427ec05f8 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/dma-mapping.h> #include <linux/clk/at91_pmc.h> +#include <linux/platform_device.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -371,8 +372,6 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); @@ -384,7 +383,6 @@ static void __init at91sam9g45_ioremap_registers(void) static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9g45_restart; at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); @@ -393,6 +391,50 @@ static void __init at91sam9g45_initialize(void) at91_gpio_init(at91sam9g45_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_RSTC, + .end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_BASE_DDRSDRC1, + .end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AT91SAM9G45_BASE_DDRSDRC0, + .end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9g45-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SHDWC, + .end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9g45_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -435,11 +477,18 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; +static void __init at91sam9g45_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, + .register_devices = at91sam9g45_register_devices, .init = at91sam9g45_initialize, + .init_time = at91sam9g45_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S deleted file mode 100644 index c40c1e2ef80f..000000000000 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * reset AT91SAM9G45 as per errata - * - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * GPLv2 Only - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - .arm - -/* - * at91_ramc_base is an array void* - * init at NULL if only one DDR controler is present in or DT - */ - .globl at91sam9g45_restart - -at91sam9g45_restart: - ldr r5, =at91_ramc_base @ preload constants - ldr r0, [r5] - ldr r5, [r5, #4] @ ddr1 - cmp r5, #0 - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access - strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 - str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access - str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b . diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 878d5015daab..f553e4ea034b 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -311,8 +311,6 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); @@ -323,7 +321,6 @@ static void __init at91sam9rl_ioremap_registers(void) static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); @@ -332,6 +329,45 @@ static void __init at91sam9rl_initialize(void) at91_gpio_init(at91sam9rl_gpio, 4); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_RSTC, + .end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_BASE_SDRAMC, + .end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SHDWC, + .end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9rl_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -374,6 +410,11 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9rl_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, @@ -382,5 +423,7 @@ AT91_SOC_START(at91sam9rl) #if defined(CONFIG_OLD_CLK_AT91) .register_clocks = at91sam9rl_register_clocks, #endif + .register_devices = at91sam9rl_register_devices, .init = at91sam9rl_initialize, + .init_time = at91sam9rl_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 597c649170aa..e76e35ce81e7 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -167,6 +167,8 @@ static struct at91_cf_data afeb9260_cf_data = { static void __init afeb9260_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -211,7 +213,7 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index a30502c8d379..ae827dd2d0d2 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -170,6 +170,8 @@ static void __init cam60_add_device_nand(void) static void __init cam60_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -188,7 +190,7 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 2037f78c84e7..731c8318f4f5 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -322,6 +322,8 @@ static struct mci_platform_data __initdata cpu9krea_mci0_data = { static void __init cpu9krea_board_init(void) { + at91_register_devices(); + /* NOR */ cpu9krea_add_device_nor(); /* Serial */ @@ -375,7 +377,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index dfa8d48146fe..d3048ccdc41f 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -25,15 +25,6 @@ #include "board.h" #include "generic.h" - -static void __init sam9_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9", NULL @@ -41,7 +32,6 @@ static const char *at91_dt_board_compat[] __initdata = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .init_time = sam9_dt_timer_init, .map_io = at91_map_io, .init_early = at91_dt_initialize, .dt_compat = at91_dt_board_compat, diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 6a064e53f4d6..129e2917506b 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -27,14 +27,6 @@ #include "at91_aic.h" #include "generic.h" -static void __init sama5_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - static void __init sama5_dt_device_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -47,7 +39,6 @@ static const char *sama5_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ - .init_time = sama5_dt_timer_init, .map_io = at91_map_io, .init_early = at91_dt_initialize, .init_machine = sama5_dt_device_init, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 68f1ab6bd08f..a6aa4a2432f2 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -138,6 +138,8 @@ static struct gpio_led flexibity_leds[] = { static void __init flexibity_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -160,7 +162,7 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index b729dd1271bf..bf5cc55c7db6 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -576,7 +576,7 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index b48d95ec5152..9c26b94ce448 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -219,7 +219,7 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index d24dda67e2d3..c2166e3a236c 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -187,6 +187,8 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -219,7 +221,7 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 65dea12d685e..bf8a946b4cd0 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -45,7 +45,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -307,6 +306,8 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -344,7 +345,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 4637432de08f..e85ada820bfb 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -49,7 +49,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -561,6 +560,8 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -603,7 +604,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -613,7 +614,7 @@ MACHINE_END MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index fc446097f410..d76680f2a209 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -50,7 +50,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -439,6 +438,8 @@ static struct platform_device *devices[] __initdata = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -483,7 +484,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index e1be6e25b380..49f075213451 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -410,7 +410,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -420,7 +420,7 @@ MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index b227732b0c83..a517c7f7af92 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -48,7 +48,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -471,6 +470,8 @@ static struct platform_device *devices[] __initdata = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -517,7 +518,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b64648b4a1fc..8bca329b0293 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -35,7 +35,6 @@ #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -292,6 +291,8 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -323,7 +324,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 1b870e6def0c..b4aff840a1a0 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -154,6 +154,8 @@ static void __init snapper9260_add_device_nand(void) static void __init snapper9260_board_init(void) { + at91_register_devices(); + at91_add_device_i2c(snapper9260_i2c_devices, ARRAY_SIZE(snapper9260_i2c_devices)); @@ -178,7 +180,7 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 3b575036ff96..e825641a1dee 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -275,7 +275,7 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, @@ -285,7 +285,7 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index cddf1e51c50e..81959cf4a137 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,6 +8,9 @@ * published by the Free Software Foundation. */ +#ifndef _AT91_GENERIC_H +#define _AT91_GENERIC_H + #include <linux/clkdev.h> #include <linux/of.h> #include <linux/reboot.h> @@ -38,12 +41,15 @@ extern int __init at91_aic5_of_init(struct device_node *node, extern void __init at91_sysirq_mask_rtc(u32 rtc_base); extern void __init at91_sysirq_mask_rtt(u32 rtt_base); + /* Devices */ +extern void __init at91_register_devices(void); /* Timer */ +extern void __init at91_init_time(void); extern void at91rm9200_ioremap_st(u32 addr); extern void at91rm9200_timer_init(void); extern void at91sam926x_ioremap_pit(u32 addr); -extern void at91sam926x_pit_init(void); +extern void at91sam926x_pit_init(int irq); extern void at91x40_timer_init(void); /* Clocks */ @@ -63,14 +69,6 @@ extern void at91_irq_resume(void); /* idle */ extern void at91sam9_idle(void); -/* reset */ -extern void at91_ioremap_rstc(u32 base_addr); -extern void at91sam9_alt_restart(enum reboot_mode, const char *); -extern void at91sam9g45_restart(enum reboot_mode, const char *); - -/* shutdown */ -extern void at91_ioremap_shdwc(u32 base_addr); - /* Matrix */ extern void at91_ioremap_matrix(u32 base_addr); @@ -91,3 +89,5 @@ extern int __init at91_gpio_of_irq_setup(struct device_node *node, struct device_node *parent); extern u32 at91_get_extern_irq(void); + +#endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5920373809c5..4073ab7f38f3 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,79 +34,8 @@ #include "pm.h" #include "gpio.h" -/* - * Show the reason for the previous system reset. - */ - -#include "at91_rstc.h" -#include "at91_shdwc.h" - static void (*at91_pm_standby)(void); -static void __init show_reset_status(void) -{ - static char reset[] __initdata = "reset"; - - static char general[] __initdata = "general"; - static char wakeup[] __initdata = "wakeup"; - static char watchdog[] __initdata = "watchdog"; - static char software[] __initdata = "software"; - static char user[] __initdata = "user"; - static char unknown[] __initdata = "unknown"; - - static char signal[] __initdata = "signal"; - static char rtc[] __initdata = "rtc"; - static char rtt[] __initdata = "rtt"; - static char restore[] __initdata = "power-restored"; - - char *reason, *r2 = reset; - u32 reset_type, wake_type; - - if (!at91_shdwc_base || !at91_rstc_base) - return; - - reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; - wake_type = at91_shdwc_read(AT91_SHDW_SR); - - switch (reset_type) { - case AT91_RSTC_RSTTYP_GENERAL: - reason = general; - break; - case AT91_RSTC_RSTTYP_WAKEUP: - /* board-specific code enabled the wakeup sources */ - reason = wakeup; - - /* "wakeup signal" */ - if (wake_type & AT91_SHDW_WAKEUP0) - r2 = signal; - else { - r2 = reason; - if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ - reason = rtt; - else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ - reason = rtc; - else if (wake_type == 0) /* power-restored wakeup */ - reason = restore; - else /* unknown wakeup */ - reason = unknown; - } - break; - case AT91_RSTC_RSTTYP_WATCHDOG: - reason = watchdog; - break; - case AT91_RSTC_RSTTYP_SOFTWARE: - reason = software; - break; - case AT91_RSTC_RSTTYP_USER: - reason = user; - break; - default: - reason = unknown; - break; - } - pr_info("AT91: Starting after %s %s\n", reason, r2); -} - static int at91_pm_valid_state(suspend_state_t state) { switch (state) { @@ -346,7 +275,6 @@ static int __init at91_pm_init(void) suspend_set_ops(&at91_pm_ops); - show_reset_status(); return 0; } arch_initcall(at91_pm_init); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index ebe7fdca9e83..961079250b83 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -5,6 +5,8 @@ * Under GPLv2 */ +#define pr_fmt(fmt) "AT91: " fmt + #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> @@ -20,7 +22,6 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include "at91_shdwc.h" #include "soc.h" #include "generic.h" #include "pm.h" @@ -37,7 +38,7 @@ void __init at91rm9200_set_type(int type) else at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - pr_info("AT91: filled in soc subtype: %s\n", + pr_info("filled in soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); } @@ -67,7 +68,7 @@ void __init at91_ioremap_ramc(int id, u32 addr, u32 size) } at91_ramc_base[id] = ioremap(addr, size); if (!at91_ramc_base[id]) - panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); + panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr); } static struct map_desc sram_desc[2] __initdata; @@ -84,7 +85,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) desc->length = length; desc->type = MT_MEMORY_RWX_NONCACHED; - pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + pr_info("sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); iotable_init(desc, 1); @@ -367,45 +368,21 @@ void __init at91_map_io(void) soc_detect(AT91_BASE_DBGU1); if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); + panic(pr_fmt("Impossible to detect the SOC type")); - pr_info("AT91: Detected soc type: %s\n", + pr_info("Detected soc type: %s\n", at91_get_soc_type(&at91_soc_initdata)); if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", + pr_info("Detected soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); if (!at91_soc_is_enabled()) - panic("AT91: Soc not enabled"); + panic(pr_fmt("Soc not enabled")); if (at91_boot_soc.map_io) at91_boot_soc.map_io(); } -void __iomem *at91_shdwc_base = NULL; - -static void at91sam9_poweroff(void) -{ - at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - -void __init at91_ioremap_shdwc(u32 base_addr) -{ - at91_shdwc_base = ioremap(base_addr, 16); - if (!at91_shdwc_base) - panic("Impossible to ioremap at91_shdwc_base\n"); - pm_power_off = at91sam9_poweroff; -} - -void __iomem *at91_rstc_base; - -void __init at91_ioremap_rstc(u32 base_addr) -{ - at91_rstc_base = ioremap(base_addr, 16); - if (!at91_rstc_base) - panic("Impossible to ioremap at91_rstc_base\n"); -} - void __init at91_alt_map_io(void) { /* Map peripherals */ @@ -438,42 +415,15 @@ void __init at91_ioremap_matrix(u32 base_addr) { at91_matrix_base = ioremap(base_addr, 512); if (!at91_matrix_base) - panic("Impossible to ioremap at91_matrix_base\n"); + panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); } #if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) -static struct of_device_id rstc_ids[] = { - { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, - { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, - { /*sentinel*/ } -}; - -static void at91_dt_rstc(void) -{ - struct device_node *np; - const struct of_device_id *of_id; - - np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); - - at91_rstc_base = of_iomap(np, 0); - if (!at91_rstc_base) - panic("unable to map rstc cpu registers\n"); - - of_id = of_match_node(rstc_ids, np); - if (!of_id) - panic("AT91: rtsc no restart function available\n"); - - arm_pm_restart = of_id->data; - - of_node_put(np); -} - static struct of_device_id ramc_ids[] = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, { /*sentinel*/ } }; @@ -481,100 +431,29 @@ static void at91_dt_ramc(void) { struct device_node *np; const struct of_device_id *of_id; + int idx = 0; + const void *standby = NULL; - np = of_find_matching_node(NULL, ramc_ids); - if (!np) - panic("unable to find compatible ram controller node in dtb\n"); - - at91_ramc_base[0] = of_iomap(np, 0); - if (!at91_ramc_base[0]) - panic("unable to map ramc[0] cpu registers\n"); - /* the controller may have 2 banks */ - at91_ramc_base[1] = of_iomap(np, 1); - - of_id = of_match_node(ramc_ids, np); - if (!of_id) - pr_warn("AT91: ramc no standby function available\n"); - else - at91_pm_set_standby(of_id->data); - - of_node_put(np); -} - -static struct of_device_id shdwc_ids[] = { - { .compatible = "atmel,at91sam9260-shdwc", }, - { .compatible = "atmel,at91sam9rl-shdwc", }, - { .compatible = "atmel,at91sam9x5-shdwc", }, - { /*sentinel*/ } -}; - -static const char *shdwc_wakeup_modes[] = { - [AT91_SHDW_WKMODE0_NONE] = "none", - [AT91_SHDW_WKMODE0_HIGH] = "high", - [AT91_SHDW_WKMODE0_LOW] = "low", - [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", -}; + for_each_matching_node_and_match(np, ramc_ids, &of_id) { + at91_ramc_base[idx] = of_iomap(np, 0); + if (!at91_ramc_base[idx]) + panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); -const int at91_dtget_shdwc_wakeup_mode(struct device_node *np) -{ - const char *pm; - int err, i; - - err = of_property_read_string(np, "atmel,wakeup-mode", &pm); - if (err < 0) - return AT91_SHDW_WKMODE0_ANYLEVEL; - - for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) - if (!strcasecmp(pm, shdwc_wakeup_modes[i])) - return i; - - return -ENODEV; -} - -static void at91_dt_shdwc(void) -{ - struct device_node *np; - int wakeup_mode; - u32 reg; - u32 mode = 0; + if (!standby) + standby = of_id->data; - np = of_find_matching_node(NULL, shdwc_ids); - if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); - return; + idx++; } - at91_shdwc_base = of_iomap(np, 0); - if (!at91_shdwc_base) - panic("AT91: unable to map shdwc cpu registers\n"); - - wakeup_mode = at91_dtget_shdwc_wakeup_mode(np); - if (wakeup_mode < 0) { - pr_warn("AT91: shdwc unknown wakeup mode\n"); - goto end; - } + if (!idx) + panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); - if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { - if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", - reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); - reg = AT91_SHDW_CPTWK0_MAX; - } - mode |= AT91_SHDW_CPTWK0_(reg); + if (!standby) { + pr_warn("ramc no standby function available\n"); + return; } - if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) - mode |= AT91_SHDW_RTCWKEN; - - if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) - mode |= AT91_SHDW_RTTWKEN; - - at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode); - -end: - pm_power_off = at91sam9_poweroff; - - of_node_put(np); + at91_pm_set_standby(standby); } void __init at91rm9200_dt_initialize(void) @@ -593,9 +472,7 @@ void __init at91rm9200_dt_initialize(void) void __init at91_dt_initialize(void) { - at91_dt_rstc(); at91_dt_ramc(); - at91_dt_shdwc(); /* Init clock subsystem */ at91_dt_clock_init(); @@ -623,3 +500,13 @@ void __init at91_initialize(unsigned long main_clock) pinctrl_provide_dummies(); } + +void __init at91_register_devices(void) +{ + at91_boot_soc.register_devices(); +} + +void __init at91_init_time(void) +{ + at91_boot_soc.init_time(); +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 8ecaee67f953..9a8fd97a8bef 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -11,7 +11,9 @@ struct at91_init_soc { void (*map_io)(void); void (*ioremap_registers)(void); void (*register_clocks)(void); + void (*register_devices)(void); void (*init)(void); + void (*init_time)(void); }; extern struct at91_init_soc at91_boot_soc; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75212c064b31..f4d06aea8460 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -83,6 +83,7 @@ config ARCH_OMAP2PLUS select PINCTRL select SOC_BUS select TI_PRIV_EDMA + select OMAP_IRQCHIP help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d9dd99c6aa28..d9e94122073e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -10,7 +10,6 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o sram.o drm.o -omap-2-3-common = irq.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ @@ -20,7 +19,7 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d95d0ef1354a..d21a3048d06b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -625,7 +625,6 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 0d499a1878f6..212c3160de18 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -142,7 +142,6 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_crane_init, .init_late = am35xx_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4f9383cecf76..1c091b3fa312 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -366,7 +366,6 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_evm_init, .init_late = am35xx_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 018353d88b96..c6df8eec4553 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -766,7 +766,6 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, @@ -779,7 +778,6 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, .init_late = omap3630_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 4eb5e6f2f7f5..8a2c1677964c 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -329,7 +329,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, .init_time = omap3_gptimer_timer_init, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index cdc4fb9960a9..d8e4f346936a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -647,7 +647,6 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, .init_late = omap35xx_init_late, .init_time = omap3_secure_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 69166eed5dba..608079a1aba6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -52,8 +52,6 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .init_time = omap2_sync32k_timer_init, .dt_compat = omap242x_boards_compat, @@ -71,8 +69,6 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap243x_map_io, .init_early = omap2430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .init_time = omap2_sync32k_timer_init, .dt_compat = omap243x_boards_compat, @@ -91,8 +87,6 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, @@ -109,8 +103,6 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3630_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, @@ -128,8 +120,6 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, @@ -146,8 +136,6 @@ DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am35xx_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_gptimer_timer_init, @@ -166,8 +154,6 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .reserve = omap_reserve, .map_io = am33xx_map_io, .init_early = am33xx_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = am33xx_init_late, .init_time = omap3_gptimer_timer_init, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 44a59c3abfb0..c2975af4cd5d 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -422,7 +422,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index aead77a4bc6d..97767a27ca9d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -33,6 +33,7 @@ #include "mmc.h" #include "soc.h" #include "gpmc-onenand.h" +#include "common-board-devices.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 @@ -568,29 +569,14 @@ static int n8x0_menelaus_late_init(struct device *dev) } #endif -static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { +struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { .late_init = n8x0_menelaus_late_init, }; -static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { - { - I2C_BOARD_INFO("menelaus", 0x72), - .irq = 7 + OMAP_INTC_START, - .platform_data = &n8x0_menelaus_platform_data, - }, -}; - -static struct aic3x_pdata n810_aic33_data __initdata = { +struct aic3x_pdata n810_aic33_data __initdata = { .gpio_reset = 118, }; -static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - .platform_data = &n810_aic33_data, - }, -}; - static int __init n8x0_late_initcall(void) { if (!board_caps) @@ -612,11 +598,5 @@ void * __init n8x0_legacy_init(void) board_check_revision(); spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); - i2c_register_board_info(0, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); - if (board_is_n810()) - i2c_register_board_info(1, n810_i2c_board_info_2, - ARRAY_SIZE(n810_i2c_board_info_2)); - return &mmc1_data; } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index e2e52031f056..81de1c68b360 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -588,7 +588,6 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .map_io = omap3_map_io, .init_early = omap3_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index bab51e64c4b5..6049f60a8813 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -230,7 +230,6 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, @@ -243,7 +242,6 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index cf18340eb3bb..f32201656cf3 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -624,7 +624,6 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a2e035e0792a..6311f4b1ee44 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -426,7 +426,6 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, .init_time = omap3_secure_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 70b904c010c6..a01993e5500f 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -388,7 +388,6 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, .init_time = omap3_secure_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f6d384111911..2dae6ccd39bb 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -564,7 +564,6 @@ MACHINE_START(OVERO, "Gumstix Overo") .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = overo_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index db168c9627a1..2d1e5a6beb85 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -134,7 +134,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init, diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index f338177e6900..07c88ae083fb 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,6 +1,8 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#include <sound/tlv320aic3x.h> +#include <linux/mfd/menelaus.h> #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K @@ -12,4 +14,7 @@ void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); void *n8x0_legacy_init(void); +extern struct menelaus_platform_data n8x0_menelaus_platform_data; +extern struct aic3x_pdata n810_aic33_data; + #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 98fe235f6670..377eea849e7b 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -32,6 +32,7 @@ #include <linux/i2c/twl.h> #include <linux/i2c-omap.h> #include <linux/reboot.h> +#include <linux/irqchip/irq-omap-intc.h> #include <asm/proc-fns.h> @@ -210,18 +211,6 @@ extern struct device *omap2_get_iva_device(void); extern struct device *omap2_get_l3_device(void); extern struct device *omap4_get_dsp_device(void); -void omap2_init_irq(void); -void omap3_init_irq(void); -void ti81xx_init_irq(void); -extern int omap_irq_pending(void); -void omap_intc_save_context(void); -void omap_intc_restore_context(void); -void omap3_intc_suspend(void); -void omap3_intc_prepare_idle(void); -void omap3_intc_resume_idle(void); -void omap2_intc_handle_irq(struct pt_regs *regs); -void omap3_intc_handle_irq(struct pt_regs *regs); -void omap_intc_of_init(void); void omap_gic_of_init(void); #ifdef CONFIG_CACHE_L2X0 @@ -229,16 +218,6 @@ extern void __iomem *omap4_get_l2cache_base(void); #endif struct device_node; -#ifdef CONFIG_OF -int __init intc_of_init(struct device_node *node, - struct device_node *parent); -#else -int __init intc_of_init(struct device_node *node, - struct device_node *parent) -{ - return 0; -} -#endif #ifdef CONFIG_SMP extern void __iomem *omap4_get_scu_base(void); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c deleted file mode 100644 index 604a976abf14..000000000000 --- a/arch/arm/mach-omap2/irq.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/irq.c - * - * Interrupt handler for OMAP2 boards. - * - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <linux/irqdomain.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include "soc.h" -#include "iomap.h" -#include "common.h" - -/* selected INTC register offsets */ - -#define INTC_REVISION 0x0000 -#define INTC_SYSCONFIG 0x0010 -#define INTC_SYSSTATUS 0x0014 -#define INTC_SIR 0x0040 -#define INTC_CONTROL 0x0048 -#define INTC_PROTECTION 0x004C -#define INTC_IDLE 0x0050 -#define INTC_THRESHOLD 0x0068 -#define INTC_MIR0 0x0084 -#define INTC_MIR_CLEAR0 0x0088 -#define INTC_MIR_SET0 0x008c -#define INTC_PENDING_IRQ0 0x0098 -/* Number of IRQ state bits in each MIR register */ -#define IRQ_BITS_PER_REG 32 - -#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) -#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ -#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -/* - * OMAP2 has a number of different interrupt controllers, each interrupt - * controller is identified as its own "bank". Register definitions are - * fairly consistent for each bank, but not all registers are implemented - * for each bank.. when in doubt, consult the TRM. - */ -static struct omap_irq_bank { - void __iomem *base_reg; - unsigned int nr_irqs; -} __attribute__ ((aligned(4))) irq_banks[] = { - { - /* MPU INTC */ - .nr_irqs = 96, - }, -}; - -static struct irq_domain *domain; - -/* Structure to save interrupt controller context */ -struct omap3_intc_regs { - u32 sysconfig; - u32 protection; - u32 idle; - u32 threshold; - u32 ilr[INTCPS_NR_IRQS]; - u32 mir[INTCPS_NR_MIR_REGS]; -}; - -/* INTC bank register get/set */ - -static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) -{ - writel_relaxed(val, bank->base_reg + reg); -} - -static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) -{ - return readl_relaxed(bank->base_reg + reg); -} - -/* XXX: FIQ and additional INTC support (only MPU at the moment) */ -static void omap_ack_irq(struct irq_data *d) -{ - intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); -} - -static void omap_mask_ack_irq(struct irq_data *d) -{ - irq_gc_mask_disable_reg(d); - omap_ack_irq(d); -} - -static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) -{ - unsigned long tmp; - - tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; - pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n", - bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - - tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); - tmp |= 1 << 1; /* soft reset */ - intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); - - while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) - /* Wait for reset to complete */; - - /* Enable autoidle */ - intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); -} - -int omap_irq_pending(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - struct omap_irq_bank *bank = irq_banks + i; - int irq; - - for (irq = 0; irq < bank->nr_irqs; irq += 32) - if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + - ((irq >> 5) << 5))) - return 1; - } - return 0; -} - -static __init void -omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("INTC", 1, irq_start, base, - handle_level_irq); - ct = gc->chip_types; - ct->chip.irq_ack = omap_mask_ack_irq; - ct->chip.irq_mask = irq_gc_mask_disable_reg; - ct->chip.irq_unmask = irq_gc_unmask_enable_reg; - ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; - - ct->regs.enable = INTC_MIR_CLEAR0; - ct->regs.disable = INTC_MIR_SET0; - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); -} - -static void __init omap_init_irq(u32 base, int nr_irqs, - struct device_node *node) -{ - void __iomem *omap_irq_base; - unsigned long nr_of_irqs = 0; - unsigned int nr_banks = 0; - int i, j, irq_base; - - omap_irq_base = ioremap(base, SZ_4K); - if (WARN_ON(!omap_irq_base)) - return; - - irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); - if (irq_base < 0) { - pr_warn("Couldn't allocate IRQ numbers\n"); - irq_base = 0; - } - - domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0, - &irq_domain_simple_ops, NULL); - - for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - struct omap_irq_bank *bank = irq_banks + i; - - bank->nr_irqs = nr_irqs; - - /* Static mapping, never released */ - bank->base_reg = ioremap(base, SZ_4K); - if (!bank->base_reg) { - pr_err("Could not ioremap irq bank%i\n", i); - continue; - } - - omap_irq_bank_init_one(bank); - - for (j = 0; j < bank->nr_irqs; j += 32) - omap_alloc_gc(bank->base_reg + j, j + irq_base, 32); - - nr_of_irqs += bank->nr_irqs; - nr_banks++; - } - - pr_info("Total of %ld interrupts on %d active controller%s\n", - nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); -} - -void __init omap2_init_irq(void) -{ - omap_init_irq(OMAP24XX_IC_BASE, 96, NULL); -} - -void __init omap3_init_irq(void) -{ - omap_init_irq(OMAP34XX_IC_BASE, 96, NULL); -} - -void __init ti81xx_init_irq(void) -{ - omap_init_irq(OMAP34XX_IC_BASE, 128, NULL); -} - -static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) -{ - u32 irqnr; - int handled_irq = 0; - - do { - irqnr = readl_relaxed(base_addr + 0x98); - if (irqnr) - goto out; - - irqnr = readl_relaxed(base_addr + 0xb8); - if (irqnr) - goto out; - - irqnr = readl_relaxed(base_addr + 0xd8); -#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX) - if (irqnr) - goto out; - irqnr = readl_relaxed(base_addr + 0xf8); -#endif - -out: - if (!irqnr) - break; - - irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET); - irqnr &= ACTIVEIRQ_MASK; - - if (irqnr) { - irqnr = irq_find_mapping(domain, irqnr); - handle_IRQ(irqnr, regs); - handled_irq = 1; - } - } while (irqnr); - - /* If an irq is masked or deasserted while active, we will - * keep ending up here with no irq handled. So remove it from - * the INTC with an ack.*/ - if (!handled_irq) - omap_ack_irq(NULL); -} - -asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs) -{ - void __iomem *base_addr = OMAP2_IRQ_BASE; - omap_intc_handle_irq(base_addr, regs); -} - -int __init intc_of_init(struct device_node *node, - struct device_node *parent) -{ - struct resource res; - u32 nr_irq = 96; - - if (WARN_ON(!node)) - return -ENODEV; - - if (of_address_to_resource(node, 0, &res)) { - WARN(1, "unable to get intc registers\n"); - return -EINVAL; - } - - if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) - pr_warn("unable to get intc-size, default to %d\n", nr_irq); - - omap_init_irq(res.start, nr_irq, of_node_get(node)); - - return 0; -} - -static const struct of_device_id irq_match[] __initconst = { - { .compatible = "ti,omap2-intc", .data = intc_of_init, }, - { } -}; - -void __init omap_intc_of_init(void) -{ - of_irq_init(irq_match); -} - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) -static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; - -void omap_intc_save_context(void) -{ - int ind = 0, i = 0; - for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { - struct omap_irq_bank *bank = irq_banks + ind; - intc_context[ind].sysconfig = - intc_bank_read_reg(bank, INTC_SYSCONFIG); - intc_context[ind].protection = - intc_bank_read_reg(bank, INTC_PROTECTION); - intc_context[ind].idle = - intc_bank_read_reg(bank, INTC_IDLE); - intc_context[ind].threshold = - intc_bank_read_reg(bank, INTC_THRESHOLD); - for (i = 0; i < INTCPS_NR_IRQS; i++) - intc_context[ind].ilr[i] = - intc_bank_read_reg(bank, (0x100 + 0x4*i)); - for (i = 0; i < INTCPS_NR_MIR_REGS; i++) - intc_context[ind].mir[i] = - intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + - (0x20 * i)); - } -} - -void omap_intc_restore_context(void) -{ - int ind = 0, i = 0; - - for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { - struct omap_irq_bank *bank = irq_banks + ind; - intc_bank_write_reg(intc_context[ind].sysconfig, - bank, INTC_SYSCONFIG); - intc_bank_write_reg(intc_context[ind].sysconfig, - bank, INTC_SYSCONFIG); - intc_bank_write_reg(intc_context[ind].protection, - bank, INTC_PROTECTION); - intc_bank_write_reg(intc_context[ind].idle, - bank, INTC_IDLE); - intc_bank_write_reg(intc_context[ind].threshold, - bank, INTC_THRESHOLD); - for (i = 0; i < INTCPS_NR_IRQS; i++) - intc_bank_write_reg(intc_context[ind].ilr[i], - bank, (0x100 + 0x4*i)); - for (i = 0; i < INTCPS_NR_MIR_REGS; i++) - intc_bank_write_reg(intc_context[ind].mir[i], - &irq_banks[0], INTC_MIR0 + (0x20 * i)); - } - /* MIRs are saved and restore with other PRCM registers */ -} - -void omap3_intc_suspend(void) -{ - /* A pending interrupt would prevent OMAP from entering suspend */ - omap_ack_irq(NULL); -} - -void omap3_intc_prepare_idle(void) -{ - /* - * Disable autoidle as it can stall interrupt controller, - * cf. errata ID i540 for 3430 (all revisions up to 3.1.x) - */ - intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG); -} - -void omap3_intc_resume_idle(void) -{ - /* Re-enable autoidle */ - intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG); -} - -asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs) -{ - void __iomem *base_addr = OMAP3_IRQ_BASE; - omap_intc_handle_irq(base_addr, regs); -} -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c8ac72604207..c95346c94829 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -344,6 +344,8 @@ static struct pdata_init auxdata_quirks[] __initdata = { struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #ifdef CONFIG_MACH_NOKIA_N8X0 OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), + OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data), + OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data), #endif #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), |