Merge tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A fairly quiet release for SPI, nothing really going on in the core
  although there's been quite a bit of driver related activity.

  This includes the addition of some shared code in drivers/memory for
  the Renesas RPC-IF which is used by a newly added SPI driver, the
  memory subsystem doesn't seem to have a fixed maintainer at the minute
  and this seemed like the most sensible way to get that hardware
  supported.

   - Quite a few cleanups and optimizations for the Altera, Qualcomm
     GENI, sun6i and lantiq drivers.

   - Several more GPIO descriptor conversions.

   - Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.

   - New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
     R8A774e1"

* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
  dt-bindings: lpspi: New property in document DT bindings for LPSPI
  spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
  spi: lpspi: remove unused fsl_lpspi->chipselect
  spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
  spi: rockchip: Fix error in SPI slave pio read
  spi: rockchip: Support 64-location deep FIFOs
  spi: rockchip: Config spi rx dma burst size depend on xfer length
  spi: spi-topcliff-pch: drop call to wakeup-disable
  spi: spidev: Align buffers for DMA
  spi: correct kernel-doc inconsistency
  spi: sun4i: update max transfer size reported
  spi: imx: enable runtime pm support
  spi: update bindings for MT8192 SoC
  spi: mediatek: add spi support for mt8192 IC
  spi: Add bindings for Lightning Mountain SoC
  spi: lantiq: Add support to Lightning Mountain SoC
  spi: lantiq: Move interrupt configuration to SoC specific data structure
  spi: lantiq: Add fifo size bit mask in SoC specific data structure
  spi: lantiq: Add support to acknowledge interrupt
  spi: lantiq: Move interrupt control register offesets to SoC specific data structure
  ...

11 files changed, 69 insertions, 91 deletions

diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index f89f4ae0e1ca..583a1d773d68 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -75,11 +75,11 @@ extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
 	imx_add_mxc_w1(&imx27_mxc_w1_data)
 
 extern const struct imx_spi_imx_data imx27_cspi_data[];
-#define imx27_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
-#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
-#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
-#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
+#define imx27_add_cspi(id, gtable) \
+	imx_add_spi_imx(&imx27_cspi_data[id], gtable)
+#define imx27_add_spi_imx0(gtable)	imx27_add_cspi(0, gtable)
+#define imx27_add_spi_imx1(gtable)	imx27_add_cspi(1, gtable)
+#define imx27_add_spi_imx2(gtable)	imx27_add_cspi(2, gtable)
 
 extern const struct imx_pata_imx_data imx27_pata_imx_data;
 #define imx27_add_pata_imx() \
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 5a4ba35a47ed..f7cc62372532 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -69,11 +69,11 @@ extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
 
 extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
-#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
-#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
-#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
+#define imx31_add_cspi(id, gtable) \
+	imx_add_spi_imx(&imx31_cspi_data[id], gtable)
+#define imx31_add_spi_imx0(gtable)	imx31_add_cspi(0, gtable)
+#define imx31_add_spi_imx1(gtable)	imx31_add_cspi(1, gtable)
+#define imx31_add_spi_imx2(gtable)	imx31_add_cspi(2, gtable)
 
 extern const struct imx_pata_imx_data imx31_pata_imx_data;
 #define imx31_add_pata_imx() \
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index ae84c08e11fa..327a1de7dce1 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_data/dma-imx-sdma.h>
 
 extern struct device mxc_aips_bus;
@@ -276,7 +277,6 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 		const struct imx_sdhci_esdhc_imx_data *data,
 		const struct esdhc_platform_data *pdata);
 
-#include <linux/platform_data/spi-imx.h>
 struct imx_spi_imx_data {
 	const char *devid;
 	int id;
@@ -285,8 +285,7 @@ struct imx_spi_imx_data {
 	int irq;
 };
 struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata);
+	const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
 
 struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
 					int irq);
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index f2cafa52c187..27747bf628a3 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2009-2010 Pengutronix
  * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
  */
+#include <linux/gpio/machine.h>
 #include "../hardware.h"
 #include "devices-common.h"
 
@@ -57,8 +58,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata)
+	const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
 {
 	struct resource res[] = {
 		{
@@ -71,7 +71,8 @@ struct platform_device *__init imx_add_spi_imx(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-
+	if (gtable)
+		gpiod_add_lookup_table(gtable);
 	return imx_add_platform_device(data->devid, data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+			res, ARRAY_SIZE(res), NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 1da5f07952ac..2db4475b7f85 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -303,18 +303,34 @@ static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
 };
 
 /* SPI */
-static int spi1_chipselect[] = {SPI1_SS0};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi1_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi1_chipselect),
+static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
+	.dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
+		 * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
+		 *
+		 * This is in "bank 4" which is subtracted by one in the macro
+		 * so this is actually bank 3 on "imx21-gpio.3".
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
-static int spi2_chipselect[] = {SPI2_SS0};
-
-static const struct spi_imx_master spi2_pdata __initconst = {
-	.chipselect	= spi2_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
+static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
+	.dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
+		 * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
+		 *
+		 * This is in "bank 4" which is subtracted by one in the macro
+		 * so this is actually bank 3 on "imx21-gpio.3".
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct imx_fb_videomode mx27_3ds_modes[] = {
@@ -397,8 +413,8 @@ static void __init mx27pdk_init(void)
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
 	imx27_add_imx2_wdt();
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
+	imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
+	imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
 
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
 	imx27_add_imx_fb(&mx27_3ds_fb_data);
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index e81386190479..23e63d3b4c6a 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -378,15 +378,6 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
 	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
-/* SPI */
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 	{
 		.modalias	= "mc13783",
@@ -561,14 +552,14 @@ static void __init mx31_3ds_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx1(NULL);
 
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	imx31_add_imx2_wdt();
 	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
 
-	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx0(NULL);
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 8f725248299e..4b955ccc92cd 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -215,16 +215,6 @@ static void __init lilly1131_usb_init(void)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
-/* SPI */
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect = 3,
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect = 3,
-};
-
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
 };
@@ -281,8 +271,8 @@ static void __init mx31lilly_board_init(void)
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx0(NULL);
+	imx31_add_spi_imx1(NULL);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 }
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index c0055f57c02d..aaccf52f7ac1 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -73,11 +73,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-/* SPI */
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static const struct mxc_nand_platform_data
 mx31lite_nand_board_info __initconst  = {
 	.width = 1,
@@ -111,16 +106,6 @@ static struct platform_device smsc911x_device = {
 	},
 };
 
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect	= 1,
-};
-
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.flags = MC13XXX_USE_RTC,
 };
@@ -246,13 +231,13 @@ static void __init mx31lite_init(void)
 				      "mx31lite");
 
 	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx0(NULL);
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
 	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx1(NULL);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 }
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 36f08f45b0ca..96845a4eaf57 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -143,10 +143,6 @@ static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static const struct spi_imx_master moboard_spi1_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static struct regulator_consumer_supply sdhc_consumers[] = {
 	{
 		.dev_name = "imx31-mmc.0",
@@ -287,10 +283,6 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = {
 	},
 };
 
-static const struct spi_imx_master moboard_spi2_pdata __initconst = {
-	.num_chipselect	= 2,
-};
-
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -514,8 +506,8 @@ static void __init mx31moboard_init(void)
 	imx31_add_imx_i2c0(&moboard_i2c0_data);
 	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	imx31_add_spi_imx1(&moboard_spi1_pdata);
-	imx31_add_spi_imx2(&moboard_spi2_pdata);
+	imx31_add_spi_imx1(NULL);
+	imx31_add_spi_imx2(NULL);
 
 	mx31moboard_init_cam();
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 2e28e1b5cddf..27a3678e0658 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 
@@ -188,11 +189,19 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = {
 	},
 };
 
-static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
-
-static const struct spi_imx_master pca100_spi0_data __initconst = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+static struct gpiod_lookup_table pca100_spi0_gpiod_table = {
+	.dev_id = "imx27-cspi.0", /* Actual device name for spi0 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, port D is
+		 * bank 3 and thus named "imx21-gpio.3".
+		 * SPI1_SS0 is GPIO_PORTD + 28
+		 * SPI1_SS1 is GPIO_PORTD + 27
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
@@ -362,7 +371,7 @@ static void __init pca100_init(void)
 	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
-	imx27_add_spi_imx0(&pca100_spi0_data);
+	imx27_add_spi_imx0(&pca100_spi0_gpiod_table);
 
 	imx27_add_imx_fb(&pca100_fb_data);
 
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 51f5142920cf..8b0e03a595c1 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -52,11 +52,6 @@ static struct spi_board_info pcm037_spi_dev[] = {
 	},
 };
 
-/* Platform Data for MXC CSPI */
-static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
-	.num_chipselect = 2,
-};
-
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {
 	{
@@ -163,7 +158,7 @@ int __init pcm037_eet_init_devices(void)
 
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-	imx31_add_spi_imx0(&pcm037_spi1_pdata);
+	imx31_add_spi_imx0(NULL);
 
 	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);