ARM: LPC32XX: Clock driver

Clock driver for the LPC32XX architecture

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

2 files changed, 1175 insertions, 0 deletions

diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 000000000000..32d63796430a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1137 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * LPC32xx clock management driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a caret are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ *                               32KHz oscillator*
+ *                               /      |      \
+ *                             RTC*   PLL397^ TOUCH
+ *                                     /
+ *               Main oscillator^     /
+ *                   |        \      /
+ *                   |         SYSCLK&
+ *                   |            \
+ *                   |             \
+ *                USB_PLL       HCLK_PLL&
+ *                   |           |    |
+ *            USB host/device  PCLK&  |
+ *                               |    |
+ *                             Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ *   clk_enable() and clk_disable() functions unless SYSCLK is based
+ *   on that clock. This allows the other oscillator that isn't driving
+ *   the HCLK PLL to be used as another system clock that can be routed
+ *   to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ *   this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ *   will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+static DEFINE_MUTEX(clkm_lock);
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+static const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+static unsigned long local_return_parent_rate(struct clk *clk)
+{
+	/*
+	 * If a clock has a rate of 0, then it inherits it's parent
+	 * clock rate
+	 */
+	while (clk->rate == 0)
+		clk = clk->parent;
+
+	return clk->rate;
+}
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+	.rate		= LPC32XX_CLOCK_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+	} else {
+		/* Enable PLL397 */
+		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+
+		/* Wait for PLL397 lock */
+		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+	} else {
+		/* Enable main oscillator */
+		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+		/* Wait for main oscillator to start */
+		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct clk osc_pll397 = {
+	.parent		= &osc_32KHz,
+	.enable		= local_pll397_enable,
+	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk osc_main = {
+	.enable		= local_oscmain_enable,
+	.rate		= LPC32XX_MAIN_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Convert a PLL register value to a PLL output frequency
+ */
+u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
+{
+	struct clk_pll_setup pllcfg;
+
+	pllcfg.cco_bypass_b15 = 0;
+	pllcfg.direct_output_b14 = 0;
+	pllcfg.fdbk_div_ctrl_b13 = 0;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
+		pllcfg.cco_bypass_b15 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
+		pllcfg.direct_output_b14 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
+		pllcfg.fdbk_div_ctrl_b13 = 1;
+	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
+	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
+	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
+
+	return clk_check_pll_setup(inputclk, &pllcfg);
+}
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+	u32 tv, tmp = 0;
+
+	if (PllSetup->analog_on != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
+	if (PllSetup->cco_bypass_b15 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
+	if (PllSetup->direct_output_b14 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+	if (PllSetup->fdbk_div_ctrl_b13 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+	tv = ffs(PllSetup->pll_p) - 1;
+	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
+		return 0;
+
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+	return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+	u32 clkin, pllreg;
+
+	clkin = clk_armpll.parent->rate;
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+
+	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+	struct clk_pll_setup *pllsetup)
+{
+	u32 ifreq, freqtol, m, n, p, fclkout;
+
+	/* Determine frequency tolerance limits */
+	freqtol = target_freq / 250;
+	ifreq = pllin_freq;
+
+	/* Is direct bypass mode possible? */
+	if (abs(pllin_freq - target_freq) <= freqtol) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 1;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_p = pll_postdivs[0];
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		return clk_check_pll_setup(ifreq, pllsetup);
+	} else if (target_freq <= ifreq) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 0;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		for (p = 0; p <= 3; p++) {
+			pllsetup->pll_p = pll_postdivs[p];
+			fclkout = clk_check_pll_setup(ifreq, pllsetup);
+			if (abs(target_freq - fclkout) <= freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is direct mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 1;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	pllsetup->pll_p = pll_postdivs[0];
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			/* Compute output frequency for this value */
+			pllsetup->pll_n = n;
+			pllsetup->pll_m = m;
+			fclkout = clk_check_pll_setup(ifreq,
+				pllsetup);
+			if (abs(target_freq - fclkout) <=
+				freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is integer mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 1;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	/* Try non-integer mode */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct clk clk_armpll = {
+	.parent		= &clk_sys,
+	.get_rate	= local_return_parent_rate,
+};
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
+	reg |= tmp;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return clk_check_pll_setup(clk_usbpll.parent->rate,
+		pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	int ret = -ENODEV;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable == 0) {
+		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/* Wait for PLL lock */
+		while ((timeout > jiffies) & (ret == -ENODEV)) {
+			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
+				ret = 0;
+		}
+
+		if (ret == 0) {
+			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+		}
+	}
+
+	return ret;
+}
+
+static unsigned long local_usbpll_round_rate(struct clk *clk,
+	unsigned long rate)
+{
+	u32 clkin, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->parent->rate;
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return 0;
+
+	return clk_check_pll_setup(clkin, &pllsetup);
+}
+
+static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 clkin, reg, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->get_rate(clk);
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return -EINVAL;
+
+	local_usbpll_enable(clk, 0);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	pllsetup.analog_on = 1;
+	local_clk_usbpll_setup(&pllsetup);
+
+	clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_usbpll = {
+	.parent		= &osc_main,
+	.set_rate	= local_usbpll_set_rate,
+	.enable		= local_usbpll_enable,
+	.rate		= 48000, /* In KHz */
+	.get_rate	= local_return_parent_rate,
+	.round_rate	= local_usbpll_round_rate,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+	static const u32 hclkdivs[4] = {1, 2, 4, 4};
+	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
+		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
+}
+
+static struct clk clk_hclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_pclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(clk->enable_reg);
+
+	if (enable == 0)
+		tmp &= ~clk->enable_mask;
+	else
+		tmp |= clk->enable_mask;
+
+	__raw_writel(tmp, clk->enable_reg);
+
+	return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer1 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_wdt = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_vfp9 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_dma = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart4 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart5 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart6 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
+	.enable_mask	= 0x4,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_kscan = {
+	.parent		= &osc_32KHz,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_nand = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_net = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
+	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_rtc = {
+	.parent		= &osc_32KHz,
+	.rate		= 1, /* 1 Hz */
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_usbd = {
+	.parent		= &clk_usbpll,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	/* Make sure 32KHz clock is the selected clock */
+	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+	if (enable == 0)
+		__raw_writel(0, clk->enable_reg);
+	else
+		__raw_writel(clk->enable_mask, clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk clk_tsc = {
+	.parent		= &osc_32KHz,
+	.enable		= tsc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	/* If rate is 0, disable clock */
+	if (enable != 0)
+		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static unsigned long mmc_get_rate(struct clk *clk)
+{
+	u32 div, rate, oldclk;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	/* Get the parent clock rate */
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Get the MMC controller clock divider value */
+	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+
+	if (!div)
+		div = 1;
+
+	return rate / div;
+}
+
+static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, prate;
+
+	/* Get the parent clock rate */
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		return prate;
+
+	div = prate / rate;
+	if (div > 0xf)
+		div = 0xf;
+
+	return prate / div;
+}
+
+static int mmc_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 oldclk, tmp;
+	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	div = prate / crate;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_mmc = {
+	.parent		= &clk_armpll,
+	.set_rate	= mmc_set_rate,
+	.get_rate	= mmc_get_rate,
+	.round_rate	= mmc_round_rate,
+	.enable		= mmc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static unsigned long clcd_get_rate(struct clk *clk)
+{
+	u32 tmp, div, rate, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Only supports internal clocking */
+	if (tmp & TIM2_BCD)
+		return rate;
+
+	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+	tmp = rate / (2 + div);
+
+	return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 tmp, prate, div, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate < prate) {
+		/* Find closest divider */
+		div = prate / rate;
+		if (div >= 2) {
+			div -= 2;
+			tmp &= ~TIM2_BCD;
+		}
+
+		tmp &= ~(0xF800001F);
+		tmp |= (div & 0x1F);
+		tmp |= (((div >> 5) & 0x1F) << 27);
+	}
+
+	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	return 0;
+}
+
+static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 prate, div;
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		rate = prate;
+	else {
+		div = prate / rate;
+		if (div > 0x3ff)
+			div = 0x3ff;
+
+		rate = prate / div;
+	}
+
+	return rate;
+}
+
+static struct clk clk_lcd = {
+	.parent		= &clk_hclk,
+	.set_rate	= clcd_set_rate,
+	.get_rate	= clcd_get_rate,
+	.round_rate	= clcd_round_rate,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+	mutex_lock(&clkm_lock);
+}
+
+static inline void clk_unlock(void)
+{
+	mutex_unlock(&clkm_lock);
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+	WARN_ON(clk->usecount == 0);
+
+	/* Don't attempt to disable clock if it has no users */
+	if (clk->usecount > 0) {
+		clk->usecount--;
+
+		/* Only disable clock when it has no more users */
+		if ((clk->usecount == 0) && (clk->enable))
+			clk->enable(clk, 0);
+
+		/* Check parent clocks, they may need to be disabled too */
+		if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	/* Enable parent clocks first and update use counts */
+	if (clk->parent)
+		ret = local_clk_enable(clk->parent);
+
+	if (!ret) {
+		/* Only enable clock if it's currently disabled */
+		if ((clk->usecount == 0) && (clk->enable))
+			ret = clk->enable(clk, 1);
+
+		if (!ret)
+			clk->usecount++;
+		else if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+
+	return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret;
+
+	clk_lock();
+	ret = local_clk_enable(clk);
+	clk_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+	clk_lock();
+	local_clk_disable(clk);
+	clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	clk_lock();
+	rate = clk->get_rate(clk);
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	/*
+	 * Most system clocks can only be enabled or disabled, with
+	 * the actual rate set as part of the peripheral dividers
+	 * instead of high level clock control
+	 */
+	if (clk->set_rate) {
+		clk_lock();
+		ret = clk->set_rate(clk, rate);
+		clk_unlock();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	clk_lock();
+
+	if (clk->round_rate)
+		rate = clk->round_rate(clk, rate);
+	else
+		rate = clk->get_rate(clk);
+
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	/* Clock re-parenting is not supported */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = (d), \
+		.con_id = (n), \
+		.clk = &(c), \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
+	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+	_REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/*
+	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
+	 * parent clock used for the ARM PLL and is used to derive
+	 * the many system clock rates in the device.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clk_sys.parent = &osc_main;
+	else
+		clk_sys.parent = &osc_pll397;
+
+	clk_sys.rate = clk_sys.parent->rate;
+
+	/* Compute the current ARM PLL and USB PLL frequencies */
+	local_update_armpll_rate();
+
+	/* Compute HCLK and PCLK bus rates */
+	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+	/*
+	 * Enable system clocks - this step is somewhat formal, as the
+	 * clocks are already running, but it does get the clock data
+	 * inline with the actual system state. Never disable these
+	 * clocks as they will only stop if the system is going to sleep.
+	 * In that case, the chip/system power management functions will
+	 * handle clock gating.
+	 */
+	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
+		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
+
+	/*
+	 * Timers 0 and 1 were enabled and are being used by the high
+	 * resolution tick function prior to this driver being initialized.
+	 * Tag them now as used.
+	 */
+	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
+		printk(KERN_ERR "Error enabling timer tick clocks\n");
+
+	return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 000000000000..c0a8434307f7
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+	struct list_head node;
+	struct clk *parent;
+	u32 rate;
+	u32 usecount;
+
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *clk);
+	int (*enable) (struct clk *, int);
+
+	/* Register address and bit mask for simple clocks */
+	void __iomem *enable_reg;
+	u32 enable_mask;
+};
+
+#endif