diff options
author | Asai Thambi S P | 2013-04-03 19:53:07 +0530 |
---|---|---|
committer | Jens Axboe | 2013-04-03 21:54:01 +0200 |
commit | d0d096b1d8b97172cee953f1a00b7d4379d398da (patch) | |
tree | 9e47917fa7477960c5c239f88188ab45732bfbfe /drivers/block/mtip32xx/mtip32xx.c | |
parent | c678ef5286ddb5cf70384ad5af286b0afc9b73e1 (diff) |
mtip32xx: recovery from command timeout
To recover from command timeouts, reset the device. In addition
to that improved timeout handling of PIO commands.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/block/mtip32xx/mtip32xx.c')
-rw-r--r-- | drivers/block/mtip32xx/mtip32xx.c | 177 |
1 files changed, 87 insertions, 90 deletions
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 92250af84e7d..30f233634650 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -243,40 +243,31 @@ static inline void release_slot(struct mtip_port *port, int tag) /* * Reset the HBA (without sleeping) * - * Just like hba_reset, except does not call sleep, so can be - * run from interrupt/tasklet context. - * * @dd Pointer to the driver data structure. * * return value * 0 The reset was successful. * -1 The HBA Reset bit did not clear. */ -static int hba_reset_nosleep(struct driver_data *dd) +static int mtip_hba_reset(struct driver_data *dd) { unsigned long timeout; - /* Chip quirk: quiesce any chip function */ - mdelay(10); - /* Set the reset bit */ writel(HOST_RESET, dd->mmio + HOST_CTL); /* Flush */ readl(dd->mmio + HOST_CTL); - /* - * Wait 10ms then spin for up to 1 second - * waiting for reset acknowledgement - */ - timeout = jiffies + msecs_to_jiffies(1000); - mdelay(10); - while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) - && time_before(jiffies, timeout)) - mdelay(1); + /* Spin for up to 2 seconds, waiting for reset acknowledgement */ + timeout = jiffies + msecs_to_jiffies(2000); + do { + mdelay(10); + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) + return -1; - if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) - return -1; + } while ((readl(dd->mmio + HOST_CTL) & HOST_RESET) + && time_before(jiffies, timeout)); if (readl(dd->mmio + HOST_CTL) & HOST_RESET) return -1; @@ -481,7 +472,7 @@ static void mtip_restart_port(struct mtip_port *port) dev_warn(&port->dd->pdev->dev, "PxCMD.CR not clear, escalating reset\n"); - if (hba_reset_nosleep(port->dd)) + if (mtip_hba_reset(port->dd)) dev_err(&port->dd->pdev->dev, "HBA reset escalation failed.\n"); @@ -527,6 +518,26 @@ static void mtip_restart_port(struct mtip_port *port) } +static int mtip_device_reset(struct driver_data *dd) +{ + int rv = 0; + + if (mtip_check_surprise_removal(dd->pdev)) + return 0; + + if (mtip_hba_reset(dd) < 0) + rv = -EFAULT; + + mdelay(1); + mtip_init_port(dd->port); + mtip_start_port(dd->port); + + /* Enable interrupts on the HBA. */ + writel(readl(dd->mmio + HOST_CTL) | HOST_IRQ_EN, + dd->mmio + HOST_CTL); + return rv; +} + /* * Helper function for tag logging */ @@ -632,7 +643,7 @@ static void mtip_timeout_function(unsigned long int data) if (cmdto_cnt) { print_tags(port->dd, "timed out", tagaccum, cmdto_cnt); if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { - mtip_restart_port(port); + mtip_device_reset(port->dd); wake_up_interruptible(&port->svc_wait); } clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); @@ -1283,11 +1294,11 @@ static int mtip_exec_internal_command(struct mtip_port *port, int rv = 0, ready2go = 1; struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL]; unsigned long to; + struct driver_data *dd = port->dd; /* Make sure the buffer is 8 byte aligned. This is asic specific. */ if (buffer & 0x00000007) { - dev_err(&port->dd->pdev->dev, - "SG buffer is not 8 byte aligned\n"); + dev_err(&dd->pdev->dev, "SG buffer is not 8 byte aligned\n"); return -EFAULT; } @@ -1300,23 +1311,21 @@ static int mtip_exec_internal_command(struct mtip_port *port, mdelay(100); } while (time_before(jiffies, to)); if (!ready2go) { - dev_warn(&port->dd->pdev->dev, + dev_warn(&dd->pdev->dev, "Internal cmd active. new cmd [%02X]\n", fis->command); return -EBUSY; } set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); port->ic_pause_timer = 0; - if (fis->command == ATA_CMD_SEC_ERASE_UNIT) - clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); - else if (fis->command == ATA_CMD_DOWNLOAD_MICRO) - clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); if (atomic == GFP_KERNEL) { if (fis->command != ATA_CMD_STANDBYNOW1) { /* wait for io to complete if non atomic */ if (mtip_quiesce_io(port, 5000) < 0) { - dev_warn(&port->dd->pdev->dev, + dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n"); release_slot(port, MTIP_TAG_INTERNAL); clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); @@ -1361,58 +1370,84 @@ static int mtip_exec_internal_command(struct mtip_port *port, /* Issue the command to the hardware */ mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL); - /* Poll if atomic, wait_for_completion otherwise */ if (atomic == GFP_KERNEL) { /* Wait for the command to complete or timeout. */ - if (wait_for_completion_timeout( + if (wait_for_completion_interruptible_timeout( &wait, - msecs_to_jiffies(timeout)) == 0) { - dev_err(&port->dd->pdev->dev, - "Internal command did not complete [%d] " - "within timeout of %lu ms\n", - atomic, timeout); - if (mtip_check_surprise_removal(port->dd->pdev) || + msecs_to_jiffies(timeout)) <= 0) { + if (rv == -ERESTARTSYS) { /* interrupted */ + dev_err(&dd->pdev->dev, + "Internal command [%02X] was interrupted after %lu ms\n", + fis->command, timeout); + rv = -EINTR; + goto exec_ic_exit; + } else if (rv == 0) /* timeout */ + dev_err(&dd->pdev->dev, + "Internal command did not complete [%02X] within timeout of %lu ms\n", + fis->command, timeout); + else + dev_err(&dd->pdev->dev, + "Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n", + fis->command, rv, timeout); + + if (mtip_check_surprise_removal(dd->pdev) || test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { + &dd->dd_flag)) { + dev_err(&dd->pdev->dev, + "Internal command [%02X] wait returned due to SR\n", + fis->command); rv = -ENXIO; goto exec_ic_exit; } + mtip_device_reset(dd); /* recover from timeout issue */ rv = -EAGAIN; + goto exec_ic_exit; } } else { + u32 hba_stat, port_stat; + /* Spin for <timeout> checking if command still outstanding */ timeout = jiffies + msecs_to_jiffies(timeout); while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) && time_before(jiffies, timeout)) { - if (mtip_check_surprise_removal(port->dd->pdev)) { + if (mtip_check_surprise_removal(dd->pdev)) { rv = -ENXIO; goto exec_ic_exit; } if ((fis->command != ATA_CMD_STANDBYNOW1) && test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { + &dd->dd_flag)) { rv = -ENXIO; goto exec_ic_exit; } - if (readl(port->mmio + PORT_IRQ_STAT) & PORT_IRQ_ERR) { - atomic_inc(&int_cmd->active); /* error */ - break; + port_stat = readl(port->mmio + PORT_IRQ_STAT); + if (!port_stat) + continue; + + if (port_stat & PORT_IRQ_ERR) { + dev_err(&dd->pdev->dev, + "Internal command [%02X] failed\n", + fis->command); + mtip_device_reset(dd); + rv = -EIO; + goto exec_ic_exit; + } else { + writel(port_stat, port->mmio + PORT_IRQ_STAT); + hba_stat = readl(dd->mmio + HOST_IRQ_STAT); + if (hba_stat) + writel(hba_stat, + dd->mmio + HOST_IRQ_STAT); } + break; } } - if (atomic_read(&int_cmd->active) > 1) { - dev_err(&port->dd->pdev->dev, - "Internal command [%02X] failed\n", fis->command); - rv = -EIO; - } if (readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) { rv = -ENXIO; - if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) { - mtip_restart_port(port); + if (!test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { + mtip_device_reset(dd); rv = -EAGAIN; } } @@ -1724,7 +1759,8 @@ static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, * -EINVAL Invalid parameters passed in, trim not supported * -EIO Error submitting trim request to hw */ -static int mtip_send_trim(struct driver_data *dd, unsigned int lba, unsigned int len) +static int mtip_send_trim(struct driver_data *dd, unsigned int lba, + unsigned int len) { int i, rv = 0; u64 tlba, tlen, sect_left; @@ -1811,45 +1847,6 @@ static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors) } /* - * Reset the HBA. - * - * Resets the HBA by setting the HBA Reset bit in the Global - * HBA Control register. After setting the HBA Reset bit the - * function waits for 1 second before reading the HBA Reset - * bit to make sure it has cleared. If HBA Reset is not clear - * an error is returned. Cannot be used in non-blockable - * context. - * - * @dd Pointer to the driver data structure. - * - * return value - * 0 The reset was successful. - * -1 The HBA Reset bit did not clear. - */ -static int mtip_hba_reset(struct driver_data *dd) -{ - mtip_deinit_port(dd->port); - - /* Set the reset bit */ - writel(HOST_RESET, dd->mmio + HOST_CTL); - - /* Flush */ - readl(dd->mmio + HOST_CTL); - - /* Wait for reset to clear */ - ssleep(1); - - /* Check the bit has cleared */ - if (readl(dd->mmio + HOST_CTL) & HOST_RESET) { - dev_err(&dd->pdev->dev, - "Reset bit did not clear.\n"); - return -1; - } - - return 0; -} - -/* * Display the identify command data. * * @port Pointer to the port data structure. |