aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
diff options
context:
space:
mode:
authorLinus Torvalds2012-10-01 12:26:52 -0700
committerLinus Torvalds2012-10-01 12:26:52 -0700
commit3498d13b8090c0b0ef911409fbc503a7c4cca6ef (patch)
tree254ca00276e863d9fba25707690c66b2a04c49e9 /drivers/char
parentdef7cb8cd4e3258db88050eaaca5438bcc3dafca (diff)
parent0c57dfcc6c1d037243c2f8fbf62eab3633326ec0 (diff)
Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/mwave/mwavedd.c16
-rw-r--r--drivers/char/pcmcia/synclink_cs.c131
-rw-r--r--drivers/char/ttyprintk.c33
3 files changed, 81 insertions, 99 deletions
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 1d82d5838f0c..164544afd680 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -430,7 +430,7 @@ static ssize_t mwave_write(struct file *file, const char __user *buf,
static int register_serial_portandirq(unsigned int port, int irq)
{
- struct uart_port uart;
+ struct uart_8250_port uart;
switch ( port ) {
case 0x3f8:
@@ -462,14 +462,14 @@ static int register_serial_portandirq(unsigned int port, int irq)
} /* switch */
/* irq is okay */
- memset(&uart, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
- uart.uartclk = 1843200;
- uart.iobase = port;
- uart.irq = irq;
- uart.iotype = UPIO_PORT;
- uart.flags = UPF_SHARE_IRQ;
- return serial8250_register_port(&uart);
+ uart.port.uartclk = 1843200;
+ uart.port.iobase = port;
+ uart.port.irq = irq;
+ uart.port.iotype = UPIO_PORT;
+ uart.port.flags = UPF_SHARE_IRQ;
+ return serial8250_register_8250_port(&uart);
}
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index a6b8ddea2227..21721d25e388 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1058,7 +1058,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if (tty && (info->port.flags & ASYNC_CTS_FLOW)) {
+ if (tty && tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
@@ -1350,7 +1350,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
/* TODO:disable interrupts instead of reset to preserve signal states */
reset_device(info);
- if (!tty || tty->termios->c_cflag & HUPCL) {
+ if (!tty || tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
@@ -1391,7 +1391,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
get_signals(info);
- if (info->netcount || (tty && (tty->termios->c_cflag & CREAD)))
+ if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -1404,14 +1404,14 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
unsigned cflag;
int bits_per_char;
- if (!tty || !tty->termios)
+ if (!tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -1734,7 +1734,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
mgslpc_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1763,7 +1763,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
mgslpc_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
@@ -2299,8 +2299,8 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
tty->driver->name );
/* just return if nothing has changed */
- if ((tty->termios->c_cflag == old_termios->c_cflag)
- && (RELEVANT_IFLAG(tty->termios->c_iflag)
+ if ((tty->termios.c_cflag == old_termios->c_cflag)
+ && (RELEVANT_IFLAG(tty->termios.c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
@@ -2308,7 +2308,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -2317,9 +2317,9 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
@@ -2330,7 +2330,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -2737,6 +2737,8 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
#if SYNCLINK_GENERIC_HDLC
hdlcdev_init(info);
#endif
+ tty_port_register_device(&info->port, serial_driver, info->line,
+ &info->p_dev->dev);
}
static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
@@ -2750,6 +2752,7 @@ static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
last->next_device = info->next_device;
else
mgslpc_device_list = info->next_device;
+ tty_unregister_device(serial_driver, info->line);
#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
@@ -2804,77 +2807,63 @@ static const struct tty_operations mgslpc_ops = {
.proc_fops = &mgslpc_proc_fops,
};
-static void synclink_cs_cleanup(void)
+static int __init synclink_cs_init(void)
{
int rc;
- while(mgslpc_device_list)
- mgslpc_remove_device(mgslpc_device_list);
-
- if (serial_driver) {
- if ((rc = tty_unregister_driver(serial_driver)))
- printk("%s(%d) failed to unregister tty driver err=%d\n",
- __FILE__,__LINE__,rc);
- put_tty_driver(serial_driver);
+ if (break_on_load) {
+ mgslpc_get_text_ptr();
+ BREAKPOINT();
}
- pcmcia_unregister_driver(&mgslpc_driver);
-}
-
-static int __init synclink_cs_init(void)
-{
- int rc;
-
- if (break_on_load) {
- mgslpc_get_text_ptr();
- BREAKPOINT();
- }
-
- if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
- return rc;
-
- serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
- if (!serial_driver) {
- rc = -ENOMEM;
- goto error;
- }
+ serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(serial_driver)) {
+ rc = PTR_ERR(serial_driver);
+ goto err;
+ }
- /* Initialize the tty_driver structure */
-
- serial_driver->driver_name = "synclink_cs";
- serial_driver->name = "ttySLP";
- serial_driver->major = ttymajor;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &mgslpc_ops);
-
- if ((rc = tty_register_driver(serial_driver)) < 0) {
- printk("%s(%d):Couldn't register serial driver\n",
- __FILE__,__LINE__);
- put_tty_driver(serial_driver);
- serial_driver = NULL;
- goto error;
- }
+ /* Initialize the tty_driver structure */
+ serial_driver->driver_name = "synclink_cs";
+ serial_driver->name = "ttySLP";
+ serial_driver->major = ttymajor;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_set_operations(serial_driver, &mgslpc_ops);
+
+ rc = tty_register_driver(serial_driver);
+ if (rc < 0) {
+ printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
+ __FILE__, __LINE__);
+ goto err_put_tty;
+ }
- printk("%s %s, tty major#%d\n",
- driver_name, driver_version,
- serial_driver->major);
+ rc = pcmcia_register_driver(&mgslpc_driver);
+ if (rc < 0)
+ goto err_unreg_tty;
- return 0;
+ printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
+ serial_driver->major);
-error:
- synclink_cs_cleanup();
- return rc;
+ return 0;
+err_unreg_tty:
+ tty_unregister_driver(serial_driver);
+err_put_tty:
+ put_tty_driver(serial_driver);
+err:
+ return rc;
}
static void __exit synclink_cs_exit(void)
{
- synclink_cs_cleanup();
+ pcmcia_unregister_driver(&mgslpc_driver);
+ tty_unregister_driver(serial_driver);
+ put_tty_driver(serial_driver);
}
module_init(synclink_cs_init);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 46b77ede84c0..af98f6d6509b 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count)
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
- if (buf[i + 1] == '\n')
+ if ((i + 1) < count && buf[i + 1] == '\n')
i++;
break;
case '\n':
@@ -178,11 +178,17 @@ static struct tty_driver *ttyprintk_driver;
static int __init ttyprintk_init(void)
{
int ret = -ENOMEM;
- void *rp;
- ttyprintk_driver = alloc_tty_driver(1);
- if (!ttyprintk_driver)
- return ret;
+ tty_port_init(&tpk_port.port);
+ tpk_port.port.ops = &null_ops;
+ mutex_init(&tpk_port.port_write_mutex);
+
+ ttyprintk_driver = tty_alloc_driver(1,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_UNNUMBERED_NODE);
+ if (IS_ERR(ttyprintk_driver))
+ return PTR_ERR(ttyprintk_driver);
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
@@ -191,9 +197,8 @@ static int __init ttyprintk_init(void)
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
- ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+ tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0);
ret = tty_register_driver(ttyprintk_driver);
if (ret < 0) {
@@ -201,22 +206,10 @@ static int __init ttyprintk_init(void)
goto error;
}
- /* create our unnumbered device */
- rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
- ttyprintk_driver->name);
- if (IS_ERR(rp)) {
- printk(KERN_ERR "Couldn't create ttyprintk device\n");
- ret = PTR_ERR(rp);
- goto error;
- }
-
- tty_port_init(&tpk_port.port);
- tpk_port.port.ops = &null_ops;
- mutex_init(&tpk_port.port_write_mutex);
-
return 0;
error:
+ tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver);
ttyprintk_driver = NULL;
return ret;