cpufreq: intel_pstate: Allow EPP 0x80 setting by the firmware

With the
"commit 3d13058ed2a6 ("cpufreq: intel_pstate: Use firmware default EPP")"
the firmware can set an EPP, which driver will not overwrite. But the
driver has a valid range check for:
0x40 > firmware epp < 0x80.
Hence firmware can't specify EPP of 0x80.

If the firmware didn't specify in the valid range, the driver has a
hard coded EPP of 102. But some Chrome hardware vendors don't want
this overwrite and wants to boot with chipset default EPP of 0x80 as
this improves battery life.

In this case they want to have capability to specify EPP of 0x80 via
the firmware. This require the valid range to include 0x80 also.
But here the valid range can't be simply extended to include 0x80 as
this is the chipset default EPP. Even without any firmware specifying
EPP, the chipset will always boot with EPP of 0x80.

To make sure that firmware specified EPP of 0x80 and not by the
chipset default, it will require additional check to make sure HWP
was enabled by the firmware before boot. Only way the firmware can
update EPP, is to enable HWP and update EPP via MSR_HWP_REQUEST.

This driver already checks, if the HWP is enabled by the firmware.
Use the same flag and extend valid range to include 0x80.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 5 insertions, 4 deletions

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 6ff73c30769f..ad9be31753b6 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -298,6 +298,7 @@ static int hwp_active __read_mostly;
 static int hwp_mode_bdw __read_mostly;
 static bool per_cpu_limits __read_mostly;
 static bool hwp_boost __read_mostly;
+static bool hwp_forced __read_mostly;
 
 static struct cpufreq_driver *intel_pstate_driver __read_mostly;
 
@@ -1679,12 +1680,12 @@ static void intel_pstate_update_epp_defaults(struct cpudata *cpudata)
 		return;
 
 	/*
-	 * If powerup EPP is something other than chipset default 0x80 and
-	 * - is more performance oriented than 0x80 (default balance_perf EPP)
+	 * If the EPP is set by firmware, which means that firmware enabled HWP
+	 * - Is equal or less than 0x80 (default balance_perf EPP)
 	 * - But less performance oriented than performance EPP
 	 *   then use this as new balance_perf EPP.
 	 */
-	if (cpudata->epp_default < HWP_EPP_BALANCE_PERFORMANCE &&
+	if (hwp_forced && cpudata->epp_default <= HWP_EPP_BALANCE_PERFORMANCE &&
 	    cpudata->epp_default > HWP_EPP_PERFORMANCE) {
 		epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = cpudata->epp_default;
 		return;
@@ -3384,7 +3385,7 @@ static int __init intel_pstate_init(void)
 
 	id = x86_match_cpu(hwp_support_ids);
 	if (id) {
-		bool hwp_forced = intel_pstate_hwp_is_enabled();
+		hwp_forced = intel_pstate_hwp_is_enabled();
 
 		if (hwp_forced)
 			pr_info("HWP enabled by BIOS\n");