Merge branch 'late/dt' into next/dt2

This is support for the ARM Chromebook, originally scheduled
as a "late" pull request. Since it's already late now, we
can combine this into the existing next/dt2 branch.

* late/dt:
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree

3 files changed, 42 insertions, 17 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 80b69971cf28..aeaea32bcfda 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -83,6 +83,7 @@ config INTEL_IOP_ADMA
 
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA support"
+	depends on GENERIC_HARDIRQS
 	select DMA_ENGINE
 	default y if CPU_AT32AP7000
 	help
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index c4b4fd2acc42..08b43bf37158 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -276,12 +276,20 @@ static void omap_dma_issue_pending(struct dma_chan *chan)
 
 	spin_lock_irqsave(&c->vc.lock, flags);
 	if (vchan_issue_pending(&c->vc) && !c->desc) {
-		struct omap_dmadev *d = to_omap_dma_dev(chan->device);
-		spin_lock(&d->lock);
-		if (list_empty(&c->node))
-			list_add_tail(&c->node, &d->pending);
-		spin_unlock(&d->lock);
-		tasklet_schedule(&d->task);
+		/*
+		 * c->cyclic is used only by audio and in this case the DMA need
+		 * to be started without delay.
+		 */
+		if (!c->cyclic) {
+			struct omap_dmadev *d = to_omap_dma_dev(chan->device);
+			spin_lock(&d->lock);
+			if (list_empty(&c->node))
+				list_add_tail(&c->node, &d->pending);
+			spin_unlock(&d->lock);
+			tasklet_schedule(&d->task);
+		} else {
+			omap_dma_start_desc(c);
+		}
 	}
 	spin_unlock_irqrestore(&c->vc.lock, flags);
 }
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 718153122759..5dbc5946c4c3 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2882,7 +2882,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct dma_pl330_platdata *pdat;
 	struct dma_pl330_dmac *pdmac;
-	struct dma_pl330_chan *pch;
+	struct dma_pl330_chan *pch, *_p;
 	struct pl330_info *pi;
 	struct dma_device *pd;
 	struct resource *res;
@@ -2984,7 +2984,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	ret = dma_async_device_register(pd);
 	if (ret) {
 		dev_err(&adev->dev, "unable to register DMAC\n");
-		goto probe_err2;
+		goto probe_err3;
+	}
+
+	if (adev->dev.of_node) {
+		ret = of_dma_controller_register(adev->dev.of_node,
+					 of_dma_pl330_xlate, pdmac);
+		if (ret) {
+			dev_err(&adev->dev,
+			"unable to register DMA to the generic DT DMA helpers\n");
+		}
 	}
 
 	dev_info(&adev->dev,
@@ -2995,16 +3004,21 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
 		pi->pcfg.num_peri, pi->pcfg.num_events);
 
-	ret = of_dma_controller_register(adev->dev.of_node,
-					 of_dma_pl330_xlate, pdmac);
-	if (ret) {
-		dev_err(&adev->dev,
-		"unable to register DMA to the generic DT DMA helpers\n");
-		goto probe_err2;
-	}
-
 	return 0;
+probe_err3:
+	amba_set_drvdata(adev, NULL);
 
+	/* Idle the DMAC */
+	list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+			chan.device_node) {
+
+		/* Remove the channel */
+		list_del(&pch->chan.device_node);
+
+		/* Flush the channel */
+		pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+		pl330_free_chan_resources(&pch->chan);
+	}
 probe_err2:
 	pl330_del(pi);
 probe_err1:
@@ -3023,8 +3037,10 @@ static int pl330_remove(struct amba_device *adev)
 	if (!pdmac)
 		return 0;
 
-	of_dma_controller_free(adev->dev.of_node);
+	if (adev->dev.of_node)
+		of_dma_controller_free(adev->dev.of_node);
 
+	dma_async_device_unregister(&pdmac->ddma);
 	amba_set_drvdata(adev, NULL);
 
 	/* Idle the DMAC */