Merge tag 'zynqmp-soc-for-v5.11-v2' of https://github.com/Xilinx/linux-xlnx into arm/drivers

arm64: soc: ZynqMP SoC changes for v5.11 v2

- Small alignments in Xilinx Firmware driver
- Exposing syscon interface for VCU driver

* tag 'zynqmp-soc-for-v5.11-v2' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message

Link: https://lore.kernel.org/r/71d38756-4456-29fc-26a3-341e1d09aafe@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 23 insertions, 23 deletions

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 8d1ff2454e2e..e5ac3008a1d7 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -585,13 +585,13 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
 /**
  * zynqmp_pm_set_sd_tapdelay() -  Set tap delay for the SD device
  *
- * @node_id	Node ID of the device
- * @type	Type of tap delay to set (input/output)
- * @value	Value to set fot the tap delay
+ * @node_id:	Node ID of the device
+ * @type:	Type of tap delay to set (input/output)
+ * @value:	Value to set fot the tap delay
  *
  * This function sets input/output tap delay for the SD device.
  *
- * @return	Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
 {
@@ -603,12 +603,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
 /**
  * zynqmp_pm_sd_dll_reset() - Reset DLL logic
  *
- * @node_id	Node ID of the device
- * @type	Reset type
+ * @node_id:	Node ID of the device
+ * @type:	Reset type
  *
  * This function resets DLL logic for the SD device.
  *
- * @return	Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
 {
@@ -619,12 +619,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
 
 /**
  * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
- * @index	GGS register index
- * @value	Register value to be written
+ * @index:	GGS register index
+ * @value:	Register value to be written
  *
  * This function writes value to GGS register.
  *
- * @return      Returns status, either success or error+reason
+ * Return:      Returns status, either success or error+reason
  */
 int zynqmp_pm_write_ggs(u32 index, u32 value)
 {
@@ -635,12 +635,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
 
 /**
  * zynqmp_pm_write_ggs() - PM API for reading global general storage (ggs)
- * @index	GGS register index
- * @value	Register value to be written
+ * @index:	GGS register index
+ * @value:	Register value to be written
  *
  * This function returns GGS register value.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_read_ggs(u32 index, u32 *value)
 {
@@ -652,12 +652,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
 /**
  * zynqmp_pm_write_pggs() - PM API for writing persistent global general
  *			     storage (pggs)
- * @index	PGGS register index
- * @value	Register value to be written
+ * @index:	PGGS register index
+ * @value:	Register value to be written
  *
  * This function writes value to PGGS register.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_write_pggs(u32 index, u32 value)
 {
@@ -669,12 +669,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
 /**
  * zynqmp_pm_write_pggs() - PM API for reading persistent global general
  *			     storage (pggs)
- * @index	PGGS register index
- * @value	Register value to be written
+ * @index:	PGGS register index
+ * @value:	Register value to be written
  *
  * This function returns PGGS register value.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_read_pggs(u32 index, u32 *value)
 {
@@ -685,12 +685,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
 
 /**
  * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
- * @value	Status value to be written
+ * @value:	Status value to be written
  *
  * This function sets healthy bit value to indicate boot health status
  * to firmware.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_set_boot_health_status(u32 value)
 {
@@ -785,10 +785,10 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
  * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
  *			       master has initialized its own power management
  *
+ * Return: Returns status, either success or error+reason
+ *
  * This API function is to be used for notify the power management controller
  * about the completed power management initialization.
- *
- * Return: Returns status, either success or error+reason
  */
 int zynqmp_pm_init_finalize(void)
 {