Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

6 files changed, 74 insertions, 40 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b16c8a72a2e2..ba7926f5c099 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ
 
 config GPIO_MC9S08DZ60
 	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
-	depends on I2C && MACH_MX35_3DS
+	depends on I2C=y && MACH_MX35_3DS
 	help
 	  Select this to enable the MC9S08DZ60 GPIO driver
 
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index ae37181798b3..ec48ed512628 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
 
 	p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
 				      pdata->number_of_pins, numa_node_id());
-	if (IS_ERR_VALUE(p->irq_base)) {
+	if (p->irq_base < 0) {
 		dev_err(&pdev->dev, "cannot get irq_desc\n");
-		return -ENXIO;
+		return p->irq_base;
 	}
 	pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
 		 pdata->gpio_base, pdata->number_of_pins, p->irq_base);
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e6efd77668f0..64fbce30c502 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,11 +25,9 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 #define OFF_MODE	1
@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 static int gpio_irq_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned gpio;
+	unsigned gpio = 0;
 	int retval;
 	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+	if (d->irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	else
+#endif
+
+	if (!gpio)
 		gpio = irq_to_gpio(bank, d->irq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
index e97016af6443..b62d443e9a59 100644
--- a/drivers/gpio/gpio-rdc321x.c
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
 	rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
 
 	rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+	rdc321x_gpio_dev->chip.owner = THIS_MODULE;
 	rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
 	rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
 	rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf36..c5f8ca233e1f 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */
@@ -395,6 +396,29 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 
 static int gpio_twl4030_remove(struct platform_device *pdev);
 
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+	struct twl4030_gpio_platform_data *omap_twl_info;
+
+	omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+	if (!omap_twl_info)
+		return NULL;
+
+	omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+			"ti,use-leds");
+
+	of_property_read_u32(dev->of_node, "ti,debounce",
+			     &omap_twl_info->debounce);
+	of_property_read_u32(dev->of_node, "ti,mmc-cd",
+			     (u32 *)&omap_twl_info->mmc_cd);
+	of_property_read_u32(dev->of_node, "ti,pullups",
+			     &omap_twl_info->pullups);
+	of_property_read_u32(dev->of_node, "ti,pulldowns",
+			     &omap_twl_info->pulldowns);
+
+	return omap_twl_info;
+}
+
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
 {
 	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -427,49 +451,57 @@ no_irqs:
 	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
 	twl_gpiochip.dev = &pdev->dev;
 
-	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
+	if (node)
+		pdata = of_gpio_twl4030(&pdev->dev);
 
-		/*
-		 * NOTE:  boards may waste power if they don't set pullups
-		 * and pulldowns correctly ... default for non-ULPI pins is
-		 * pulldown, and some other pins may have external pullups
-		 * or pulldowns.  Careful!
-		 */
-		ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-		if (ret)
-			dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-					pdata->pullups, pdata->pulldowns,
-					ret);
-
-		ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-		if (ret)
-			dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-					pdata->debounce, pdata->mmc_cd,
-					ret);
-
-		/*
-		 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-		 * is (still) clear if use_leds is set.
-		 */
-		if (pdata->use_leds)
-			twl_gpiochip.ngpio += 2;
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Platform data is missing\n");
+		return -ENXIO;
 	}
 
+	/*
+	 * NOTE:  boards may waste power if they don't set pullups
+	 * and pulldowns correctly ... default for non-ULPI pins is
+	 * pulldown, and some other pins may have external pullups
+	 * or pulldowns.  Careful!
+	 */
+	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+	if (ret)
+		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+			pdata->pullups, pdata->pulldowns, ret);
+
+	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+	if (ret)
+		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+			pdata->debounce, pdata->mmc_cd, ret);
+
+	/*
+	 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+	 * is (still) clear if use_leds is set.
+	 */
+	if (pdata->use_leds)
+		twl_gpiochip.ngpio += 2;
+
 	ret = gpiochip_add(&twl_gpiochip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 
@@ -481,7 +513,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a18c4aa68b1e..f1a45997aea8 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
 	gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
 
 	of_node_put(gg_data.gpiospec.np);
-	pr_debug("%s exited with status %d\n", __func__, ret);
+	pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio);
 	return gg_data.out_gpio;
 }
 EXPORT_SYMBOL(of_get_named_gpio_flags);