Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just a few straggling fixes I hoovered up, and an intel fixes pull
  from Daniel which fixes some regressions, and some mgag200 fixes from
  Matrox."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/mgag200: Fix framebuffer base address programming
  drm/mgag200: Convert counter delays to jiffies
  drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register
  drm/mgag200: Don't change unrelated registers during modeset
  drm: Only print a debug message when the polled connector has changed
  drm: Make the HPD status updates debug logs more readable
  drm: Use names of ioctls in debug traces
  drm: Remove pointless '-' characters from drm_fb_helper documentation
  drm: Add kernel-doc for drm_fb_helper_funcs->initial_config
  drm: refactor call to request_module
  drm: Don't prune modes loudly when a connector is disconnected
  drm: Add missing break in the command line mode parsing code
  drm/i915: clear the stolen fb before resuming
  Revert "drm/i915: Calculate correct stolen size for GEN7+"
  drm/i915: hsw: fix link training for eDP on port-A
  Revert "drm/i915: revert eDP bpp clamping code changes"
  drm: don't check modeset locks in panic handler
  drm/i915: Fix pipe enabled mask for pipe C in WM calculations
  drm/mm: fix dump table BUG
  drm/i915: Always normalize return timeout for wait_timeout_ioctl

1 files changed, 48 insertions, 29 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fb2fbc1e08b9..3d704b706a8d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -702,6 +702,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	/* Walk through all bpp values. Luckily they're all nicely spaced with 2
 	 * bpc in between. */
 	bpp = min_t(int, 8*3, pipe_config->pipe_bpp);
+	if (is_edp(intel_dp) && dev_priv->edp.bpp)
+		bpp = min_t(int, bpp, dev_priv->edp.bpp);
+
 	for (; bpp >= 6*3; bpp -= 2*3) {
 		mode_rate = intel_dp_link_required(target_clock, bpp);
 
@@ -739,6 +742,7 @@ found:
 	intel_dp->link_bw = bws[clock];
 	intel_dp->lane_count = lane_count;
 	adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
+	pipe_config->pipe_bpp = bpp;
 	pipe_config->pixel_target_clock = target_clock;
 
 	DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
@@ -751,20 +755,6 @@ found:
 			       target_clock, adjusted_mode->clock,
 			       &pipe_config->dp_m_n);
 
-	/*
-	 * XXX: We have a strange regression where using the vbt edp bpp value
-	 * for the link bw computation results in black screens, the panel only
-	 * works when we do the computation at the usual 24bpp (but still
-	 * requires us to use 18bpp). Until that's fully debugged, stay
-	 * bug-for-bug compatible with the old code.
-	 */
-	if (is_edp(intel_dp) && dev_priv->edp.bpp) {
-		DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n",
-			      bpp, dev_priv->edp.bpp);
-		bpp = min_t(int, bpp, dev_priv->edp.bpp);
-	}
-	pipe_config->pipe_bpp = bpp;
-
 	return true;
 }
 
@@ -1389,6 +1379,7 @@ static void intel_enable_dp(struct intel_encoder *encoder)
 	ironlake_edp_panel_on(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, true);
 	intel_dp_complete_link_train(intel_dp);
+	intel_dp_stop_link_train(intel_dp);
 	ironlake_edp_backlight_on(intel_dp);
 }
 
@@ -1711,10 +1702,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = intel_dig_port->port;
 	int ret;
-	uint32_t temp;
 
 	if (HAS_DDI(dev)) {
-		temp = I915_READ(DP_TP_CTL(port));
+		uint32_t temp = I915_READ(DP_TP_CTL(port));
 
 		if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
 			temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
@@ -1724,18 +1714,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 		temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
 		switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
 		case DP_TRAINING_PATTERN_DISABLE:
-
-			if (port != PORT_A) {
-				temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
-				I915_WRITE(DP_TP_CTL(port), temp);
-
-				if (wait_for((I915_READ(DP_TP_STATUS(port)) &
-					      DP_TP_STATUS_IDLE_DONE), 1))
-					DRM_ERROR("Timed out waiting for DP idle patterns\n");
-
-				temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
-			}
-
 			temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
 
 			break;
@@ -1811,6 +1789,37 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 	return true;
 }
 
+static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum port port = intel_dig_port->port;
+	uint32_t val;
+
+	if (!HAS_DDI(dev))
+		return;
+
+	val = I915_READ(DP_TP_CTL(port));
+	val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+	val |= DP_TP_CTL_LINK_TRAIN_IDLE;
+	I915_WRITE(DP_TP_CTL(port), val);
+
+	/*
+	 * On PORT_A we can have only eDP in SST mode. There the only reason
+	 * we need to set idle transmission mode is to work around a HW issue
+	 * where we enable the pipe while not in idle link-training mode.
+	 * In this case there is requirement to wait for a minimum number of
+	 * idle patterns to be sent.
+	 */
+	if (port == PORT_A)
+		return;
+
+	if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE),
+		     1))
+		DRM_ERROR("Timed out waiting for DP idle patterns\n");
+}
+
 /* Enable corresponding port and start training pattern 1 */
 void
 intel_dp_start_link_train(struct intel_dp *intel_dp)
@@ -1953,10 +1962,19 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		++tries;
 	}
 
+	intel_dp_set_idle_link_train(intel_dp);
+
+	intel_dp->DP = DP;
+
 	if (channel_eq)
 		DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
 
-	intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE);
+}
+
+void intel_dp_stop_link_train(struct intel_dp *intel_dp)
+{
+	intel_dp_set_link_train(intel_dp, intel_dp->DP,
+				DP_TRAINING_PATTERN_DISABLE);
 }
 
 static void
@@ -2164,6 +2182,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 			      drm_get_encoder_name(&intel_encoder->base));
 		intel_dp_start_link_train(intel_dp);
 		intel_dp_complete_link_train(intel_dp);
+		intel_dp_stop_link_train(intel_dp);
 	}
 }