diff options
| author | Adam Ford | 2023-03-19 07:55:24 -0500 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2023-05-11 23:03:10 +0900 |
| commit | 052d22acd7da3ee89c119fc5eb45d3e3ac9d4b2a (patch) | |
| tree | 251d97e0a04589aa88b9df4db3383e88908f34a3 /drivers/gpu | |
| parent | 1f141fe5153a7892c9d033f8b5c6783a81579203 (diff) | |
drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535
[ Upstream commit ee0285e13455fdbce5de315bdbe91b5f198a2a06 ]
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/bridge/adv7511/adv7533.c | 25 |
1 files changed, 11 insertions, 14 deletions
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c index 258c79d4dab0..b8eeaf4736e7 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c @@ -103,22 +103,19 @@ void adv7533_dsi_power_off(struct adv7511 *adv) enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv, const struct drm_display_mode *mode) { - int lanes; + unsigned long max_lane_freq; struct mipi_dsi_device *dsi = adv->dsi; + u8 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); - if (mode->clock > 80000) - lanes = 4; - else - lanes = 3; - - /* - * TODO: add support for dynamic switching of lanes - * by using the bridge pre_enable() op . Till then filter - * out the modes which shall need different number of lanes - * than what was configured in the device tree. - */ - if (lanes != dsi->lanes) - return MODE_BAD; + /* Check max clock for either 7533 or 7535 */ + if (mode->clock > (adv->type == ADV7533 ? 80000 : 148500)) + return MODE_CLOCK_HIGH; + + /* Check max clock for each lane */ + max_lane_freq = (adv->type == ADV7533 ? 800000 : 891000); + + if (mode->clock * bpp > max_lane_freq * adv->num_dsi_lanes) + return MODE_CLOCK_HIGH; return MODE_OK; } |