i2c: iproc: Add i2c repeated start capability

Enable handling of i2c repeated start. The current code
handles a multi msg i2c transfer as separate i2c bus
transactions. This change will now handle this case
using the i2c repeated start protocol. The number of msgs
in a transfer is limited to two, and must be a write
followed by a read.

Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Icarus Chau <icarus.chau@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Shivaraj Shetty <sshetty1@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

1 files changed, 50 insertions, 13 deletions

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 9ffdffaf6141..30efb7913b2e 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -81,6 +81,7 @@
 #define M_CMD_PROTOCOL_MASK          0xf
 #define M_CMD_PROTOCOL_BLK_WR        0x7
 #define M_CMD_PROTOCOL_BLK_RD        0x8
+#define M_CMD_PROTOCOL_PROCESS       0xa
 #define M_CMD_PEC_SHIFT              8
 #define M_CMD_RD_CNT_SHIFT           0
 #define M_CMD_RD_CNT_MASK            0xff
@@ -675,13 +676,20 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
 	return 0;
 }
 
-static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
-					 struct i2c_msg *msg)
+/*
+ * If 'process_call' is true, then this is a multi-msg transfer that requires
+ * a repeated start between the messages.
+ * More specifically, it must be a write (reg) followed by a read (data).
+ * The i2c quirks are set to enforce this rule.
+ */
+static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
+					struct i2c_msg *msgs, bool process_call)
 {
 	int i;
 	u8 addr;
 	u32 val, tmp, val_intr_en;
 	unsigned int tx_bytes;
+	struct i2c_msg *msg = &msgs[0];
 
 	/* check if bus is busy */
 	if (!!(iproc_i2c_rd_reg(iproc_i2c,
@@ -707,14 +715,29 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
 			val = msg->buf[i];
 
 			/* mark the last byte */
-			if (i == msg->len - 1)
-				val |= BIT(M_TX_WR_STATUS_SHIFT);
+			if (!process_call && (i == msg->len - 1))
+				val |= 1 << M_TX_WR_STATUS_SHIFT;
 
 			iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
 		}
 		iproc_i2c->tx_bytes = tx_bytes;
 	}
 
+	/* Process the read message if this is process call */
+	if (process_call) {
+		msg++;
+		iproc_i2c->msg = msg;  /* point to second msg */
+
+		/*
+		 * The last byte to be sent out should be a slave
+		 * address with read operation
+		 */
+		addr = i2c_8bit_addr_from_msg(msg);
+		/* mark it the last byte out */
+		val = addr | (1 << M_TX_WR_STATUS_SHIFT);
+		iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
+	}
+
 	/* mark as incomplete before starting the transaction */
 	if (iproc_i2c->irq)
 		reinit_completion(&iproc_i2c->done);
@@ -733,7 +756,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
 	 * underrun interrupt, which will be triggerred when the TX FIFO is
 	 * empty. When that happens we can then pump more data into the FIFO
 	 */
-	if (!(msg->flags & I2C_M_RD) &&
+	if (!process_call && !(msg->flags & I2C_M_RD) &&
 	    msg->len > iproc_i2c->tx_bytes)
 		val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT);
 
@@ -743,6 +766,8 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
 	 */
 	val = BIT(M_CMD_START_BUSY_SHIFT);
 	if (msg->flags & I2C_M_RD) {
+		u32 protocol;
+
 		iproc_i2c->rx_bytes = 0;
 		if (msg->len > M_RX_FIFO_MAX_THLD_VALUE)
 			iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE;
@@ -758,7 +783,10 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
 		/* enable the RX threshold interrupt */
 		val_intr_en |= BIT(IE_M_RX_THLD_SHIFT);
 
-		val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) |
+		protocol = process_call ?
+				M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD;
+
+		val |= (protocol << M_CMD_PROTOCOL_SHIFT) |
 		       (msg->len << M_CMD_RD_CNT_SHIFT);
 	} else {
 		val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
@@ -774,17 +802,24 @@ static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
 			      struct i2c_msg msgs[], int num)
 {
 	struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
-	int ret, i;
+	bool process_call = false;
+	int ret;
 
-	/* go through all messages */
-	for (i = 0; i < num; i++) {
-		ret = bcm_iproc_i2c_xfer_single_msg(iproc_i2c, &msgs[i]);
-		if (ret) {
-			dev_dbg(iproc_i2c->device, "xfer failed\n");
-			return ret;
+	if (num == 2) {
+		/* Repeated start, use process call */
+		process_call = true;
+		if (msgs[1].flags & I2C_M_NOSTART) {
+			dev_err(iproc_i2c->device, "Invalid repeated start\n");
+			return -EOPNOTSUPP;
 		}
 	}
 
+	ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call);
+	if (ret) {
+		dev_dbg(iproc_i2c->device, "xfer failed\n");
+		return ret;
+	}
+
 	return num;
 }
 
@@ -809,6 +844,8 @@ static struct i2c_algorithm bcm_iproc_algo = {
 };
 
 static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE,
 	.max_read_len = M_RX_MAX_READ_LEN,
 };