ide: add struct ide_port_info instances to legacy host drivers

* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 12 insertions, 6 deletions

diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 85902074b1fc..651845bf1ae5 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -555,7 +555,6 @@ static void __devinit
 ide_init_sgiioc4(ide_hwif_t * hwif)
 {
 	hwif->mmio = 1;
-	hwif->pio_mask = 0x00;
 	hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
 	hwif->set_dma_mode = &sgiioc4_set_dma_mode;
 	hwif->selectproc = NULL;/* Use the default routine to select drive */
@@ -572,8 +571,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	if (hwif->dma_base == 0)
 		return;
 
-	hwif->mwdma_mask = ATA_MWDMA2_ONLY;
-
 	hwif->dma_host_set = &sgiioc4_dma_host_set;
 	hwif->dma_setup = &sgiioc4_ide_dma_setup;
 	hwif->dma_start = &sgiioc4_ide_dma_start;
@@ -583,6 +580,13 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->dma_timeout = &ide_dma_timeout;
 }
 
+static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+	.chipset		= ide_pci,
+	.host_flags		= IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+				  IDE_HFLAG_NO_AUTOTUNE,
+	.mwdma_mask		= ATA_MWDMA2_ONLY,
+};
+
 static int __devinit
 sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 {
@@ -593,6 +597,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	int h;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	hw_regs_t hw;
+	struct ide_port_info d = sgiioc4_port_info;
 
 	/*
 	 * Find an empty HWIF; if none available, return -ENOMEM.
@@ -641,7 +646,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	ide_init_port_hw(hwif, &hw);
 
 	hwif->dev = &dev->dev;
-	hwif->channel = 0;	/* Single Channel chip */
 
 	/* The IOC4 uses MMIO rather than Port IO. */
 	default_hwif_mmiops(hwif);
@@ -649,15 +653,17 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base))
+	if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) {
 		printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
 				 hwif->name, DRV_NAME);
+		d.mwdma_mask = 0;
+	}
 
 	ide_init_sgiioc4(hwif);
 
 	idx[0] = hwif->index;
 
-	if (ide_device_add(idx))
+	if (ide_device_add(idx, &d))
 		return -EIO;
 
 	return 0;