diff options
| author | Greg Kroah-Hartman | 2018-05-11 09:50:04 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2018-05-11 09:50:04 +0200 |
| commit | 6a8b25abf1b79db6877645335c73ad6a5061d9b0 (patch) | |
| tree | 5c18fa75ece496f0b4b77483ad2645e1fbdde29d /drivers/iio | |
| parent | 26a5e9b834a647b9d4dfbeef8b42f201cb3293ae (diff) | |
| parent | d58c67d1d851d40b0094b6dd8b1a27ac9076ffa2 (diff) | |
Merge tag 'iio-for-4.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st round of IIO new device support, features and cleanup for the 4.18 cycle
A nice mix this time of excellent cleanups (many to send drivers
speeding toward staging graduations) and new drivers / device support.
A good part of this is Brian Masney's never ending task on the tsl2x7x
driver. The end is in sight so hopefully we'll get that one out of
staging very soon!
New device support
* AD5686
- Support AD5685R (was wrongly present as AD5685)
- Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel
SPI DACs with various precisions.
- Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R
I2C DACs with various percisions and numbers of channels.
* Analog front end rescale driver - New driver.
- Support current sensing usings a shunt resistor.
- Support simple voltage dividers.
- support simple current sense amplifiers.
* TI dac5571
- New driver and device bindings supporting:
dac5571, dac6571, dac7571, dac5574, dac6574, dac7574,
dac5573, dac6573 and dac7573
* Meson-adc
- Support for Meson AXG with DT bindings.
* mpu6050
- Support the mpu9255 which only requires additional WHOAMI entry and
compatible string.
* st_lsm6dsx
- Support for lsm330dlc combinded accelerometer and gyro sensors with
DT bindings.
* stm32_adc
- Add support for STM32MP1 with bindings.
Staging graduations
* adis16201 after some excelent cleanup by Himanshu Jha.
* adis16029 after some excelent cleanup by Shreeya Patel.
New features:
* ABI docs
- Add core ABI docs for angle channels.
* inv_mpu6050
- Provide support for the full range of interrupts the device
supports.
* st_accel
- Add SMO8840 ACPI ID seen in the wild on some Lenovo machines.
* stx104
- Provide a multiple gpio get function.
Cleanups / Minor fixes
* core
- Use new nested structure support to improve kernel-doc.
* ad2s1200
- Use be16_to_cpup instead of opencoding.
* ad5686
- Indentation tidy up.
- Switch to SPDX
- Refactor to allow various numbers of channels.
- Refactor to separate core and SPI specific support, prior to
addition of i2c equivalent devices.
* ad7606
- Use drvdata directly from device rather than boucing via the
platform_device structure.
* ad7746
- Replace opencoded byte swapped i2c calls with _swapped variants.
- White space and line break readability improvements.
- Reorder includes and variable declarations where appropriate.
* ad7791
- Changes to the AD ADC library used by this driver took in the
sampling frequency. This lead to be the wrong path being the one
tied to the resulting attribute, so it didn't work, and a warning
to be printed.
* ad7780
- Remove apparent support for sampling frequency control on devices
that don't support changing the sampling attributes.
* ade7854
- Fix a read of the wrong number of bits.
- Improve error handling on i2c read/write errors.
- Rework i2c and spi code to reduce duplication.
* adis16201 (staging)
- Improve meaning inherent in some macro names by adding units etc
where relevant.
- Adjust comments to improve detail and drop the irrelevant.
- Rename register address definitions definitions to add a _REG
postfix, clearly separating them from field definitions. Reorganize
the definitions to group register address and fields.
- Use sign_extend32 rather than open coding.
- Reverse Xmas tree ordering where appropriate and align function args.
- Remove unused headers.
- Use GENMASK where appropriate instead of open coding.
* adis16209 (staging)
- Indent field definitions to visually separate them from
register address definitions.
- Use reverse xmas tree ordering where appropriate.
- Add some whitespace where it will help readability.
- Drop some unused headers.
- Use GENMASK where appropriate.
* ad2s1200
- Drop unnecessary includes and reorder alphabetically.
- Reverse xmas tree and blank line cleanups.
* atlas-ph-sensor
- Use msleep instead of usleep_range where the precise value doesn't
matter and the delays are long.
* bcm150
- Drop transaction splitting as core now handles it.
* cros_ec
- Move the shared header to the include/iio/common directory.
This brings it inline with the other multiple type devices.
- Use drvdata directly from device rather than boucing via the
platform_device structure.
* hid-sensors
- Use drvdata directly from device rather than boucing via the
platform_device structure.
* inv_mpu6050
- Clear out a second function definition for the same function.
- Don't flush fifo when the iio buffer is full but just drop excess
data.
- Tidy up set_power_itg and ensure it is used in the right places.
- Use set_power_itg rather than opencoding it again in the i2c mux
control.
- Make sure error paths disable the power if undoing power on.
- Used managed devm_ functions during probe. Delete remove function.
- Refactor to pull raw data read out of read_raw function.
- Simplify data reading error paths.
- Only enable the i2c mux for chips with the i2c aux bus (not icm20608)
- Fix a potential deadlock due to varying lock ordering.
- Fix an issue where first sample from gyro after enabling is unstable
by dropping the first sample.
- Fix an issue where the user_ctrl register is incorrectly overwritten.
- Tidy up some grammar and spelling minor issus.
* mcp320x
- Use vendor compatible strings.
* mcp4018
- Switch to using i2c .probe_new.
* mcp4351
- switch to using i2c .probe_new.
* meson-adc
- rework handing on common ADC platform data so it can be shared
across multiple families of SoCs.
* sca3000
- Fix an error handling path if the ring configure fails.
* st_lsm6dsx
- Fix a wrong fifo threshold mask (no actual effect)
* stm32-dfsdm
- Style fixes and cleanups.
- Check filter ID is in range and check spi-max-frequency.
* tsl2x7x (staging)
- Drop some unnecessary function calls, unused variables and
unnecessary local variables.
- Fix wrong interrupt type.
- Avoid unnecessary double clear of interrupt.
- Simplify proximity calibration call which did various things
unrelated to actually calibrating.
- Separate control of the proximity and ALS interrupts.
- Improve consistency of logging.
- Separate ALS and proximity persistence settings as they have
separate hardware controls.
- Tidy up variable ordering.
- Add Brian to copyright notice given consider work on this driver.
- Take advantage of hardware support for I2C address auto increment.
- Combine individuaal enable and period attributes for the two
directions on the threshold events into a single value as the
hardware doesn't separate them.
- Move integration_time* attributes from light channel to
intensity value as they effect the intensity readings directly
and the light reading only indirectly. Hence this better
reflects reality. Also move the calibscale_available.
- Avoid returning an error in the IRQ handler.
- Hard code the reg value in _clear_interrupts as it only takes
one value in the code. Result is the function has little
purpose so opencode the two remaining i2c_smbus_write_byte
calls.
- Drop some unnecessary checking of the chip status register.
- Tidy up return path in _write_interrupt_config.
- Tidy up the ID verification code.
- Move the power and diode settings defines into the header as these
are needed for platform data configuration.
- Various renames and comment cleanups for consistency and clarity.
- Use actual device defaults for default startup settings.
- SPDX
- Add some range sanity checking to sysfs attribute writes.
- Don't provide event interfaces if the interrupt line isn't available.
- Use IIO_CONST_ATTR macro for calibscale_available as it's a constant
string.
- Fix the integration time and lux equations.
- Make device IDs explicit index values in the device_channel_config array.
Diffstat (limited to 'drivers/iio')
47 files changed, 2608 insertions, 827 deletions
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index b3c8c6ef0dff..d69e85a8bdc3 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -70,6 +70,7 @@ config IIO_TRIGGERED_EVENT source "drivers/iio/accel/Kconfig" source "drivers/iio/adc/Kconfig" +source "drivers/iio/afe/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index b16b2e9ddc40..d8cba9c229c0 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o obj-y += accel/ obj-y += adc/ +obj-y += afe/ obj-y += amplifiers/ obj-y += buffer/ obj-y += chemical/ diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index c6d9517d7611..62ae7e5abcfa 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -5,6 +5,30 @@ menu "Accelerometers" +config ADIS16201 + tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16201 dual-axis + digital inclinometer and accelerometer. + + To compile this driver as a module, say M here: the module will + be called adis16201. + +config ADIS16209 + tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer + and accelerometer. + + To compile this driver as a module, say M here: the module will be + called adis16209. + config ADXL345 tristate diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 368aedb6377a..636d4d1b2990 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,8 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ADIS16201) += adis16201.o +obj-$(CONFIG_ADIS16209) += adis16209.o obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c new file mode 100644 index 000000000000..4c1d482ea73a --- /dev/null +++ b/drivers/iio/accel/adis16201.c @@ -0,0 +1,321 @@ +/* + * ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> + +#include <linux/iio/iio.h> +#include <linux/iio/imu/adis.h> + +#define ADIS16201_STARTUP_DELAY_MS 220 +#define ADIS16201_FLASH_CNT 0x00 + +/* Data Output Register Information */ +#define ADIS16201_SUPPLY_OUT_REG 0x02 +#define ADIS16201_XACCL_OUT_REG 0x04 +#define ADIS16201_YACCL_OUT_REG 0x06 +#define ADIS16201_AUX_ADC_REG 0x08 +#define ADIS16201_TEMP_OUT_REG 0x0A +#define ADIS16201_XINCL_OUT_REG 0x0C +#define ADIS16201_YINCL_OUT_REG 0x0E + +/* Calibration Register Definition */ +#define ADIS16201_XACCL_OFFS_REG 0x10 +#define ADIS16201_YACCL_OFFS_REG 0x12 +#define ADIS16201_XACCL_SCALE_REG 0x14 +#define ADIS16201_YACCL_SCALE_REG 0x16 +#define ADIS16201_XINCL_OFFS_REG 0x18 +#define ADIS16201_YINCL_OFFS_REG 0x1A +#define ADIS16201_XINCL_SCALE_REG 0x1C +#define ADIS16201_YINCL_SCALE_REG 0x1E + +/* Alarm Register Definition */ +#define ADIS16201_ALM_MAG1_REG 0x20 +#define ADIS16201_ALM_MAG2_REG 0x22 +#define ADIS16201_ALM_SMPL1_REG 0x24 +#define ADIS16201_ALM_SMPL2_REG 0x26 +#define ADIS16201_ALM_CTRL_REG 0x28 + +#define ADIS16201_AUX_DAC_REG 0x30 +#define ADIS16201_GPIO_CTRL_REG 0x32 +#define ADIS16201_SMPL_PRD_REG 0x36 +/* Operation, filter configuration */ +#define ADIS16201_AVG_CNT_REG 0x38 +#define ADIS16201_SLP_CNT_REG 0x3A + +/* Miscellaneous Control Register Definition */ +#define ADIS16201_MSC_CTRL_REG 0x34 +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8) +/* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2) +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH BIT(1) +/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */ +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0) + +/* Diagnostics System Status Register Definition */ +#define ADIS16201_DIAG_STAT_REG 0x3C +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9) +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8) +#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3 +#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2 +/* Power supply above 3.625 V */ +#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1 +/* Power supply below 3.15 V */ +#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0 + +/* System Command Register Definition */ +#define ADIS16201_GLOB_CMD_REG 0x3E +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1) + +#define ADIS16201_ERROR_ACTIVE BIT(14) + +enum adis16201_scan { + ADIS16201_SCAN_ACC_X, + ADIS16201_SCAN_ACC_Y, + ADIS16201_SCAN_INCLI_X, + ADIS16201_SCAN_INCLI_Y, + ADIS16201_SCAN_SUPPLY, + ADIS16201_SCAN_AUX_ADC, + ADIS16201_SCAN_TEMP, +}; + +static const u8 adis16201_addresses[] = { + [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS_REG, + [ADIS16201_SCAN_ACC_Y] = ADIS16201_YACCL_OFFS_REG, + [ADIS16201_SCAN_INCLI_X] = ADIS16201_XINCL_OFFS_REG, + [ADIS16201_SCAN_INCLI_Y] = ADIS16201_YINCL_OFFS_REG, +}; + +static int adis16201_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int ret; + int bits; + u8 addr; + s16 val16; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, + ADIS16201_ERROR_ACTIVE, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->channel == 0) { + /* Voltage base units are mV hence 1.22 mV */ + *val = 1; + *val2 = 220000; + } else { + /* Voltage base units are mV hence 0.61 mV */ + *val = 0; + *val2 = 610000; + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = -470; + *val2 = 0; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + /* + * IIO base unit for sensitivity of accelerometer + * is milli g. + * 1 LSB represents 0.244 mg. + */ + *val = 0; + *val2 = IIO_G_TO_M_S_2(462400); + return IIO_VAL_INT_PLUS_NANO; + case IIO_INCLI: + *val = 0; + *val2 = 100000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* + * The raw ADC value is 1278 when the temperature + * is 25 degrees and the scale factor per milli + * degree celcius is -470. + */ + *val = 25000 / -470 - 1278; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ACCEL: + bits = 12; + break; + case IIO_INCLI: + bits = 9; + break; + default: + return -EINVAL; + } + addr = adis16201_addresses[chan->scan_index]; + ret = adis_read_reg_16(st, addr, &val16); + if (ret) + return ret; + + *val = sign_extend32(val16, bits - 1); + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int adis16201_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int m; + + if (mask != IIO_CHAN_INFO_CALIBBIAS) + return -EINVAL; + + switch (chan->type) { + case IIO_ACCEL: + m = GENMASK(11, 0); + break; + case IIO_INCLI: + m = GENMASK(8, 0); + break; + default: + return -EINVAL; + } + + return adis_write_reg_16(st, adis16201_addresses[chan->scan_index], + val & m); +} + +static const struct iio_chan_spec adis16201_channels[] = { + ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT_REG, ADIS16201_SCAN_SUPPLY, 0, + 12), + ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT_REG, ADIS16201_SCAN_TEMP, 0, 12), + ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT_REG, ADIS16201_SCAN_ACC_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT_REG, ADIS16201_SCAN_ACC_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12), + ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + IIO_CHAN_SOFT_TIMESTAMP(7) +}; + +static const struct iio_info adis16201_info = { + .read_raw = adis16201_read_raw, + .write_raw = adis16201_write_raw, + .update_scan_mode = adis_update_scan_mode, +}; + +static const char * const adis16201_status_error_msgs[] = { + [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", + [ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed", + [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V", + [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V", +}; + +static const struct adis_data adis16201_data = { + .read_delay = 20, + .msc_ctrl_reg = ADIS16201_MSC_CTRL_REG, + .glob_cmd_reg = ADIS16201_GLOB_CMD_REG, + .diag_stat_reg = ADIS16201_DIAG_STAT_REG, + + .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, + .startup_delay = ADIS16201_STARTUP_DELAY_MS, + + .status_error_msgs = adis16201_status_error_msgs, + .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) | + BIT(ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT) | + BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) | + BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT), +}; + +static int adis16201_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + indio_dev->name = spi->dev.driver->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adis16201_info; + + indio_dev->channels = adis16201_channels; + indio_dev->num_channels = ARRAY_SIZE(adis16201_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis_init(st, indio_dev, spi, &adis16201_data); + if (ret) + return ret; + + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL); + if (ret) + return ret; + + ret = adis_initial_startup(st); + if (ret) + goto error_cleanup_buffer_trigger; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto error_cleanup_buffer_trigger; + + return 0; + +error_cleanup_buffer_trigger: + adis_cleanup_buffer_and_trigger(st, indio_dev); + return ret; +} + +static int adis16201_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adis *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + adis_cleanup_buffer_and_trigger(st, indio_dev); + + return 0; +} + +static struct spi_driver adis16201_driver = { + .driver = { + .name = "adis16201", + }, + .probe = adis16201_probe, + .remove = adis16201_remove, +}; +module_spi_driver(adis16201_driver); + +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:adis16201"); diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c new file mode 100644 index 000000000000..f2dc3a5f0463 --- /dev/null +++ b/drivers/iio/accel/adis16209.c @@ -0,0 +1,330 @@ +/* + * ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include <linux/iio/iio.h> +#include <linux/iio/imu/adis.h> + +#define ADIS16209_STARTUP_DELAY_MS 220 +#define ADIS16209_FLASH_CNT_REG 0x00 + +/* Data Output Register Definitions */ +#define ADIS16209_SUPPLY_OUT_REG 0x02 +#define ADIS16209_XACCL_OUT_REG 0x04 +#define ADIS16209_YACCL_OUT_REG 0x06 +/* Output, auxiliary ADC input */ +#define ADIS16209_AUX_ADC_REG 0x08 +/* Output, temperature */ +#define ADIS16209_TEMP_OUT_REG 0x0A +/* Output, +/- 90 degrees X-axis inclination */ +#define ADIS16209_XINCL_OUT_REG 0x0C +#define ADIS16209_YINCL_OUT_REG 0x0E +/* Output, +/-180 vertical rotational position */ +#define ADIS16209_ROT_OUT_REG 0x10 + +/* + * Calibration Register Definitions. + * Acceleration, inclination or rotation offset null. + */ +#define ADIS16209_XACCL_NULL_REG 0x12 +#define ADIS16209_YACCL_NULL_REG 0x14 +#define ADIS16209_XINCL_NULL_REG 0x16 +#define ADIS16209_YINCL_NULL_REG 0x18 +#define ADIS16209_ROT_NULL_REG 0x1A + +/* Alarm Register Definitions */ +#define ADIS16209_ALM_MAG1_REG 0x20 +#define ADIS16209_ALM_MAG2_REG 0x22 +#define ADIS16209_ALM_SMPL1_REG 0x24 +#define ADIS16209_ALM_SMPL2_REG 0x26 +#define ADIS16209_ALM_CTRL_REG 0x28 + +#define ADIS16209_AUX_DAC_REG 0x30 +#define ADIS16209_GPIO_CTRL_REG 0x32 +#define ADIS16209_SMPL_PRD_REG 0x36 +#define ADIS16209_AVG_CNT_REG 0x38 +#define ADIS16209_SLP_CNT_REG 0x3A + +#define ADIS16209_MSC_CTRL_REG 0x34 +#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) +#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) +#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) +#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) + +#define ADIS16209_STAT_REG 0x3C +#define ADIS16209_STAT_ALARM2 BIT(9) +#define ADIS16209_STAT_ALARM1 BIT(8) +#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5 +#define ADIS16209_STAT_SPI_FAIL_BIT 3 +#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2 +/* Power supply above 3.625 V */ +#define ADIS16209_STAT_POWER_HIGH_BIT 1 +/* Power supply below 3.15 V */ +#define ADIS16209_STAT_POWER_LOW_BIT 0 + +#define ADIS16209_CMD_REG 0x3E +#define ADIS16209_CMD_SW_RESET BIT(7) +#define ADIS16209_CMD_CLEAR_STAT BIT(4) +#define ADIS16209_CMD_FACTORY_CAL BIT(1) + +#define ADIS16209_ERROR_ACTIVE BIT(14) + +enum adis16209_scan { + ADIS16209_SCAN_SUPPLY, + ADIS16209_SCAN_ACC_X, + ADIS16209_SCAN_ACC_Y, + ADIS16209_SCAN_AUX_ADC, + ADIS16209_SCAN_TEMP, + ADIS16209_SCAN_INCLI_X, + ADIS16209_SCAN_INCLI_Y, + ADIS16209_SCAN_ROT, +}; + +static const u8 adis16209_addresses[8][1] = { + [ADIS16209_SCAN_SUPPLY] = { }, + [ADIS16209_SCAN_AUX_ADC] = { }, + [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG }, + [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG }, + [ADIS16209_SCAN_ROT] = { }, + [ADIS16209_SCAN_TEMP] = { }, +}; + +static int adis16209_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int m; + + if (mask != IIO_CHAN_INFO_CALIBBIAS) + return -EINVAL; + + switch (chan->type) { + case IIO_ACCEL: + case IIO_INCLI: + m = GENMASK(13, 0); + break; + default: + return -EINVAL; + } + + return adis_write_reg_16(st, adis16209_addresses[chan->scan_index][0], + val & m); +} + +static int adis16209_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct adis *st = iio_priv(indio_dev); + int ret; + int bits; + u8 addr; + s16 val16; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, + ADIS16209_ERROR_ACTIVE, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + *val = 0; + switch (chan->channel) { + case 0: + *val2 = 305180; /* 0.30518 mV */ + break; + case 1: + *val2 = 610500; /* 0.6105 mV */ + break; + default: + return -EINVAL; + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = -470; + *val2 = 0; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + /* + * IIO base unit for sensitivity of accelerometer + * is milli g. + * 1 LSB represents 0.244 mg. + */ + *val = 0; + *val2 = IIO_G_TO_M_S_2(244140); + return IIO_VAL_INT_PLUS_NANO; + case IIO_INCLI: + case IIO_ROT: + /* + * IIO base units for rotation are degrees. + * 1 LSB represents 0.025 milli degrees. + */ + *val = 0; + *val2 = 25000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* + * The raw ADC value is 0x4FE when the temperature + * is 45 degrees and the scale factor per milli + * degree celcius is -470. + */ + *val = 25000 / -470 - 0x4FE; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ACCEL: + bits = 14; + break; + default: + return -EINVAL; + } + addr = adis16209_addresses[chan->scan_index][0]; + ret = adis_read_reg_16(st, addr, &val16); + if (ret) + return ret; + + *val = sign_extend32(val16, bits - 1); + return IIO_VAL_INT; + } + return -EINVAL; +} + +static const struct iio_chan_spec adis16209_channels[] = { + ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY, + 0, 14), + ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12), + ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y, + BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14), + ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12), + ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X, + 0, 0, 14), + ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y, + 0, 0, 14), + ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14), + IIO_CHAN_SOFT_TIMESTAMP(8) +}; + +static const struct iio_info adis16209_info = { + .read_raw = adis16209_read_raw, + .write_raw = adis16209_write_raw, + .update_scan_mode = adis_update_scan_mode, +}; + +static const char * const adis16209_status_error_msgs[] = { + [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure", + [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure", + [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed", + [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V", + [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V", +}; + +static const struct adis_data adis16209_data = { + .read_delay = 30, + .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG, + .glob_cmd_reg = ADIS16209_CMD_REG, + .diag_stat_reg = ADIS16209_STAT_REG, + + .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, + .self_test_no_autoclear = true, + .startup_delay = ADIS16209_STARTUP_DELAY_MS, + + .status_error_msgs = adis16209_status_error_msgs, + .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) | + BIT(ADIS16209_STAT_SPI_FAIL_BIT) | + BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) | + BIT(ADIS16209_STAT_POWER_HIGH_BIT) | + BIT(ADIS16209_STAT_POWER_LOW_BIT), +}; + +static int adis16209_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + indio_dev->name = spi->dev.driver->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adis16209_info; + indio_dev->channels = adis16209_channels; + indio_dev->num_channels = ARRAY_SIZE(adis16209_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis_init(st, indio_dev, spi, &adis16209_data); + if (ret) + return ret; + + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL); + if (ret) + return ret; + + ret = adis_initial_startup(st); + if (ret) + goto error_cleanup_buffer_trigger; + ret = iio_device_register(indio_dev); + if (ret) + goto error_cleanup_buffer_trigger; + + return 0; + +error_cleanup_buffer_trigger: + adis_cleanup_buffer_and_trigger(st, indio_dev); + return ret; +} + +static int adis16209_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adis *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + adis_cleanup_buffer_and_trigger(st, indio_dev); + + return 0; +} + +static struct spi_driver adis16209_driver = { + .driver = { + .name = "adis16209", + }, + .probe = adis16209_probe, + .remove = adis16209_remove, +}; +module_spi_driver(adis16209_driver); + +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:adis16209"); diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 208f2d9f0e8a..383c802eb5b8 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -837,29 +837,12 @@ static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, int sample_length = 3 * 2; int ret; int total_length = samples * sample_length; - int i; - size_t step = regmap_get_raw_read_max(data->regmap); - - if (!step || step > total_length) - step = total_length; - else if (step < total_length) - step = sample_length; - - /* - * Seems we have a bus with size limitation so we have to execute - * multiple reads - */ - for (i = 0; i < total_length; i += step) { - ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, - &buffer[i], step); - if (ret) - break; - } + ret = regmap_raw_read(data->regmap, BMC150_ACCEL_REG_FIFO_DATA, + buffer, total_length); if (ret) dev_err(dev, - "Error transferring data from fifo in single steps of %zu\n", - step); + "Error transferring data from fifo: %d\n", ret); return ret; } diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c index f33dadf7b262..4dceb75e3586 100644 --- a/drivers/iio/accel/sca3000.c +++ b/drivers/iio/accel/sca3000.c @@ -1277,7 +1277,7 @@ static int sca3000_configure_ring(struct iio_dev *indio_dev) { struct iio_buffer *buffer; - buffer = iio_kfifo_allocate(); + buffer = devm_iio_kfifo_allocate(&indio_dev->dev); if (!buffer) return -ENOMEM; @@ -1287,11 +1287,6 @@ static int sca3000_configure_ring(struct iio_dev *indio_dev) return 0; } -static void sca3000_unconfigure_ring(struct iio_dev *indio_dev) -{ - iio_kfifo_free(indio_dev->buffer); -} - static inline int __sca3000_hw_ring_state_set(struct iio_dev *indio_dev, bool state) { @@ -1486,7 +1481,9 @@ static int sca3000_probe(struct spi_device *spi) } indio_dev->modes = INDIO_DIRECT_MODE; - sca3000_configure_ring(indio_dev); + ret = sca3000_configure_ring(indio_dev); + if (ret) + return ret; if (spi->irq) { ret = request_threaded_irq(spi->irq, @@ -1546,8 +1543,6 @@ static int sca3000_remove(struct spi_device *spi) if (spi->irq) free_irq(spi->irq, indio_dev); - sca3000_unconfigure_ring(indio_dev); - return 0; } diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 6bdec8c451e0..056dddb27236 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -107,6 +107,7 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id st_accel_acpi_match[] = { + {"SMO8840", LNG2DM}, {"SMO8A90", LNG2DM}, { }, }; diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c index 70fbf92f9827..a9ff0695ddf7 100644 --- a/drivers/iio/adc/ad7791.c +++ b/drivers/iio/adc/ad7791.c @@ -153,6 +153,17 @@ struct ad7791_state { const struct ad7791_chip_info *info; }; +static const int ad7791_sample_freq_avail[8][2] = { + [AD7791_FILTER_RATE_120] = { 120, 0 }, + [AD7791_FILTER_RATE_100] = { 100, 0 }, + [AD7791_FILTER_RATE_33_3] = { 33, 300000 }, + [AD7791_FILTER_RATE_20] = { 20, 0 }, + [AD7791_FILTER_RATE_16_6] = { 16, 600000 }, + [AD7791_FILTER_RATE_16_7] = { 16, 700000 }, + [AD7791_FILTER_RATE_13_3] = { 13, 300000 }, + [AD7791_FILTER_RATE_9_5] = { 9, 500000 }, +}; + static struct ad7791_state *ad_sigma_delta_to_ad7791(struct ad_sigma_delta *sd) { return container_of(sd, struct ad7791_state, sd); @@ -202,6 +213,7 @@ static int ad7791_read_raw(struct iio_dev *indio_dev, { struct ad7791_state *st = iio_priv(indio_dev); bool unipolar = !!(st->mode & AD7791_MODE_UNIPOLAR); + unsigned int rate; switch (info) { case IIO_CHAN_INFO_RAW: @@ -239,63 +251,56 @@ static int ad7791_read_raw(struct iio_dev *indio_dev, *val2 = chan->scan_type.realbits - 1; return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + rate = st->filter & AD7791_FILTER_RATE_MASK; + *val = ad7791_sample_freq_avail[rate][0]; + *val2 = ad7791_sample_freq_avail[rate][1]; + return IIO_VAL_INT_PLUS_MICRO; } return -EINVAL; } -static const char * const ad7791_sample_freq_avail[] = { - [AD7791_FILTER_RATE_120] = "120", - [AD7791_FILTER_RATE_100] = "100", - [AD7791_FILTER_RATE_33_3] = "33.3", - [AD7791_FILTER_RATE_20] = "20", - [AD7791_FILTER_RATE_16_6] = "16.6", - [AD7791_FILTER_RATE_16_7] = "16.7", - [AD7791_FILTER_RATE_13_3] = "13.3", - [AD7791_FILTER_RATE_9_5] = "9.5", -}; - -static ssize_t ad7791_read_frequency(struct device *dev, - struct device_attribute *attr, char *buf) +static int ad7791_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7791_state *st = iio_priv(indio_dev); - unsigned int rate = st->filter & AD7791_FILTER_RATE_MASK; - - return sprintf(buf, "%s\n", ad7791_sample_freq_avail[rate]); -} - -static ssize_t ad7791_write_frequency(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7791_state *st = iio_priv(indio_dev); - int i, ret; - - i = sysfs_match_string(ad7791_sample_freq_avail, buf); - if (i < 0) - return i; + int ret, i; ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; - st->filter &= ~AD7791_FILTER_RATE_MASK; - st->filter |= i; - ad_sd_write_reg(&st->sd, AD7791_REG_FILTER, sizeof(st->filter), - st->filter); - iio_device_release_direct_mode(indio_dev); - return len; -} + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++) { + if (ad7791_sample_freq_avail[i][0] == val && + ad7791_sample_freq_avail[i][1] == val2) + break; + } + + if (i == ARRAY_SIZE(ad7791_sample_freq_avail)) { + ret = -EINVAL; + break; + } + + st->filter &= ~AD7791_FILTER_RATE_MASK; + st->filter |= i; + ad_sd_write_reg(&st->sd, AD7791_REG_FILTER, + sizeof(st->filter), + st->filter); + break; + default: + ret = -EINVAL; + } -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - ad7791_read_frequency, - ad7791_write_frequency); + iio_device_release_direct_mode(indio_dev); + return ret; +} static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("120 100 33.3 20 16.7 16.6 13.3 9.5"); static struct attribute *ad7791_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_const_attr_sampling_frequency_available.dev_attr.attr, NULL }; @@ -306,12 +311,14 @@ static const struct attribute_group ad7791_attribute_group = { static const struct iio_info ad7791_info = { .read_raw = &ad7791_read_raw, + .write_raw = &ad7791_write_raw, .attrs = &ad7791_attribute_group, .validate_trigger = ad_sd_validate_trigger, }; static const struct iio_info ad7791_no_filter_info = { .read_raw = &ad7791_read_raw, + .write_raw = &ad7791_write_raw, .validate_trigger = ad_sd_validate_trigger, }; diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index ede955d9b2a4..2948909f3ee3 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -219,15 +219,19 @@ enum meson_sar_adc_chan7_mux_sel { CHAN7_MUX_CH7_INPUT = 0x7, }; -struct meson_sar_adc_data { +struct meson_sar_adc_param { bool has_bl30_integration; unsigned long clock_rate; u32 bandgap_reg; unsigned int resolution; - const char *name; const struct regmap_config *regmap_config; }; +struct meson_sar_adc_data { + const struct meson_sar_adc_param *param; + const char *name; +}; + struct meson_sar_adc_priv { struct regmap *regmap; struct regulator *vref; @@ -276,7 +280,7 @@ static int meson_sar_adc_calib_val(struct iio_dev *indio_dev, int val) /* use val_calib = scale * val_raw + offset calibration function */ tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias; - return clamp(tmp, 0, (1 << priv->data->resolution) - 1); + return clamp(tmp, 0, (1 << priv->data->param->resolution) - 1); } static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev) @@ -328,7 +332,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev, } fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval); - fifo_val &= GENMASK(priv->data->resolution - 1, 0); + fifo_val &= GENMASK(priv->data->param->resolution - 1, 0); *val = meson_sar_adc_calib_val(indio_dev, fifo_val); return 0; @@ -447,7 +451,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev) mutex_lock(&indio_dev->mlock); - if (priv->data->has_bl30_integration) { + if (priv->data->param->has_bl30_integration) { /* prevent BL30 from using the SAR ADC while we are using it */ regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, MESON_SAR_ADC_DELAY_KERNEL_BUSY, @@ -475,7 +479,7 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev) { struct meson_sar_adc_priv *priv = iio_priv(indio_dev); - if (priv->data->has_bl30_integration) + if (priv->data->param->has_bl30_integration) /* allow BL30 to use the SAR ADC again */ regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0); @@ -559,7 +563,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev, } *val = ret / 1000; - *val2 = priv->data->resolution; + *val2 = priv->data->param->resolution; return IIO_VAL_FRACTIONAL_LOG2; case IIO_CHAN_INFO_CALIBBIAS: @@ -632,7 +636,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev) */ meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_CH7_INPUT); - if (priv->data->has_bl30_integration) { + if (priv->data->param->has_bl30_integration) { /* * leave sampling delay and the input clocks as configured by * BL30 to make sure BL30 gets the values it expects when @@ -712,7 +716,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev) return ret; } - ret = clk_set_rate(priv->adc_clk, priv->data->clock_rate); + ret = clk_set_rate(priv->adc_clk, priv->data->param->clock_rate); if (ret) { dev_err(indio_dev->dev.parent, "failed to set adc clock rate\n"); @@ -725,14 +729,15 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev) static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off) { struct meson_sar_adc_priv *priv = iio_priv(indio_dev); + const struct meson_sar_adc_param *param = priv->data->param; u32 enable_mask; - if (priv->data->bandgap_reg == MESON_SAR_ADC_REG11) + if (param->bandgap_reg == MESON_SAR_ADC_REG11) enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN; else enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN; - regmap_update_bits(priv->regmap, priv->data->bandgap_reg, enable_mask, + regmap_update_bits(priv->regmap, param->bandgap_reg, enable_mask, on_off ? enable_mask : 0); } @@ -844,8 +849,8 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev) int ret, nominal0, nominal1, value0, value1; /* use points 25% and 75% for calibration */ - nominal0 = (1 << priv->data->resolution) / 4; - nominal1 = (1 << priv->data->resolution) * 3 / 4; + nominal0 = (1 << priv->data->param->resolution) / 4; + nominal1 = (1 << priv->data->param->resolution) * 3 / 4; meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4); usleep_range(10, 20); @@ -883,51 +888,60 @@ static const struct iio_info meson_sar_adc_iio_info = { .read_raw = meson_sar_adc_iio_info_read_raw, }; -static const struct meson_sar_adc_data meson_sar_adc_meson8_data = { - .has_bl30_integration = false, - .clock_rate = 1150000, - .bandgap_reg = MESON_SAR_ADC_DELTA_10, - .regmap_config = &meson_sar_adc_regmap_config_meson8, - .resolution = 10, - .name = "meson-meson8-saradc", -}; - -static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = { +static const struct meson_sar_adc_param meson_sar_adc_meson8_param = { .has_bl30_integration = false, .clock_rate = 1150000, .bandgap_reg = MESON_SAR_ADC_DELTA_10, .regmap_config = &meson_sar_adc_regmap_config_meson8, .resolution = 10, - .name = "meson-meson8b-saradc", }; -static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = { +static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = { .has_bl30_integration = true, .clock_rate = 1200000, .bandgap_reg = MESON_SAR_ADC_REG11, .regmap_config = &meson_sar_adc_regmap_config_gxbb, .resolution = 10, - .name = "meson-gxbb-saradc", }; -static const struct meson_sar_adc_data meson_sar_adc_gxl_data = { +static const struct meson_sar_adc_param meson_sar_adc_gxl_param = { .has_bl30_integration = true, .clock_rate = 1200000, .bandgap_reg = MESON_SAR_ADC_REG11, .regmap_config = &meson_sar_adc_regmap_config_gxbb, .resolution = 12, +}; + +static const struct meson_sar_adc_data meson_sar_adc_meson8_data = { + .param = &meson_sar_adc_meson8_param, + .name = "meson-meson8-saradc", +}; + +static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = { + .param = &meson_sar_adc_meson8_param, + .name = "meson-meson8b-saradc", +}; + +static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = { + .param = &meson_sar_adc_gxbb_param, + .name = "meson-gxbb-saradc", +}; + +static const struct meson_sar_adc_data meson_sar_adc_gxl_data = { + .param = &meson_sar_adc_gxl_param, .name = "meson-gxl-saradc", }; static const struct meson_sar_adc_data meson_sar_adc_gxm_data = { - .has_bl30_integration = true, - .clock_rate = 1200000, - .bandgap_reg = MESON_SAR_ADC_REG11, - .regmap_config = &meson_sar_adc_regmap_config_gxbb, - .resolution = 12, + .param = &meson_sar_adc_gxl_param, .name = "meson-gxm-saradc", }; +static const struct meson_sar_adc_data meson_sar_adc_axg_data = { + .param = &meson_sar_adc_gxl_param, + .name = "meson-axg-saradc", +}; + static const struct of_device_id meson_sar_adc_of_match[] = { { .compatible = "amlogic,meson8-saradc", @@ -946,6 +960,9 @@ static const struct of_device_id meson_sar_adc_of_match[] = { }, { .compatible = "amlogic,meson-gxm-saradc", .data = &meson_sar_adc_gxm_data, + }, { + .compatible = "amlogic,meson-axg-saradc", + .data = &meson_sar_adc_axg_data, }, {}, }; @@ -1001,7 +1018,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev) return ret; priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, - priv->data->regmap_config); + priv->data->param->regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index 40be7d9fadbf..ca432e7b6ff1 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -34,9 +34,6 @@ #define STM32F4_ADC_ADCPRE_SHIFT 16 #define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16) -/* STM32 F4 maximum analog clock rate (from datasheet) */ -#define STM32F4_ADC_MAX_CLK_RATE 36000000 - /* STM32H7 - common registers for all ADC instances */ #define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00) #define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08) @@ -51,9 +48,6 @@ #define STM32H7_CKMODE_SHIFT 16 #define STM32H7_CKMODE_MASK GENMASK(17, 16) -/* STM32 H7 maximum analog clock rate (from datasheet) */ -#define STM32H7_ADC_MAX_CLK_RATE 36000000 - /** * stm32_adc_common_regs - stm32 common registers, compatible dependent data * @csr: common status register offset @@ -74,15 +68,17 @@ struct stm32_adc_priv; * stm32_adc_priv_cfg - stm32 core compatible configuration data * @regs: common registers for all instances * @clk_sel: clock selection routine + * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet) */ struct stm32_adc_priv_cfg { const struct stm32_adc_common_regs *regs; int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *); + u32 max_clk_rate_hz; }; /** * struct stm32_adc_priv - stm32 ADC core private data - * @irq: irq for ADC block + * @irq: irq(s) for ADC block * @domain: irq domain reference * @aclk: clock reference for the analog circuitry * @bclk: bus clock common for all ADCs, depends on part used @@ -91,7 +87,7 @@ struct stm32_adc_priv_cfg { * @common: common data for all ADC instances */ struct stm32_adc_priv { - int irq; + int irq[STM32_ADC_MAX_ADCS]; struct irq_domain *domain; struct clk *aclk; struct clk *bclk; @@ -133,7 +129,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev, } for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) { - if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE) + if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz) break; } if (i >= ARRAY_SIZE(stm32f4_pclk_div)) { @@ -222,7 +218,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev, if (ckmode) continue; - if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE) + if ((rate / div) <= priv->cfg->max_clk_rate_hz) goto out; } } @@ -242,7 +238,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev, if (!ckmode) continue; - if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE) + if ((rate / div) <= priv->cfg->max_clk_rate_hz) goto out; } @@ -328,11 +324,24 @@ static int stm32_adc_irq_probe(struct platform_device *pdev, struct stm32_adc_priv *priv) { struct device_node *np = pdev->dev.of_node; + unsigned int i; + + for (i = 0; i < STM32_ADC_MAX_ADCS; i++) { + priv->irq[i] = platform_get_irq(pdev, i); + if (priv->irq[i] < 0) { + /* + * At least one interrupt must be provided, make others + * optional: + * - stm32f4/h7 shares a common interrupt. + * - stm32mp1, has one line per ADC (either for ADC1, + * ADC2 or both). + */ + if (i && priv->irq[i] == -ENXIO) + continue; + dev_err(&pdev->dev, "failed to get irq\n"); - priv->irq = platform_get_irq(pdev, 0); - if (priv->irq < 0) { - dev_err(&pdev->dev, "failed to get irq\n"); - return priv->irq; + return priv->irq[i]; + } } priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0, @@ -343,8 +352,12 @@ static int stm32_adc_irq_probe(struct platform_device *pdev, return -ENOMEM; } - irq_set_chained_handler(priv->irq, stm32_adc_irq_handler); - irq_set_handler_data(priv->irq, priv); + for (i = 0; i < STM32_ADC_MAX_ADCS; i++) { + if (priv->irq[i] < 0) + continue; + irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler); + irq_set_handler_data(priv->irq[i], priv); + } return 0; } @@ -353,11 +366,17 @@ static void stm32_adc_irq_remove(struct platform_device *pdev, struct stm32_adc_priv *priv) { int hwirq; + unsigned int i; for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++) irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq)); irq_domain_remove(priv->domain); - irq_set_chained_handler(priv->irq, NULL); + + for (i = 0; i < STM32_ADC_MAX_ADCS; i++) { + if (priv->irq[i] < 0) + continue; + irq_set_chained_handler(priv->irq[i], NULL); + } } static int stm32_adc_probe(struct platform_device *pdev) @@ -497,11 +516,19 @@ static int stm32_adc_remove(struct platform_device *pdev) static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = { .regs = &stm32f4_adc_common_regs, .clk_sel = stm32f4_adc_clk_sel, + .max_clk_rate_hz = 36000000, }; static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = { .regs = &stm32h7_adc_common_regs, .clk_sel = stm32h7_adc_clk_sel, + .max_clk_rate_hz = 36000000, +}; + +static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = { + .regs = &stm32h7_adc_common_regs, + .clk_sel = stm32h7_adc_clk_sel, + .max_clk_rate_hz = 40000000, }; static const struct of_device_id stm32_adc_of_match[] = { @@ -512,6 +539,9 @@ static const struct of_device_id stm32_adc_of_match[] = { .compatible = "st,stm32h7-adc-core", .data = (void *)&stm32h7_adc_priv_cfg }, { + .compatible = "st,stm32mp1-adc-core", + .data = (void *)&stm32mp1_adc_priv_cfg + }, { }, }; MODULE_DEVICE_TABLE(of, stm32_adc_of_match); diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 9a2583caedaa..378411853d75 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -84,6 +84,7 @@ #define STM32H7_ADC_CALFACT2 0xC8 /* STM32H7_ADC_ISR - bit fields */ +#define STM32MP1_VREGREADY BIT(12) #define STM32H7_EOC BIT(2) #define STM32H7_ADRDY BIT(0) @@ -249,6 +250,7 @@ struct stm32_adc; * @adc_info: per instance input channels definitions * @trigs: external trigger sources * @clk_required: clock is required + * @has_vregready: vregready status flag presence * @selfcalib: optional routine for self-calibration * @prepare: optional prepare routine (power-up, enable) * @start_conv: routine to start conversions @@ -261,6 +263,7 @@ struct stm32_adc_cfg { const struct stm32_adc_info *adc_info; struct stm32_adc_trig_info *trigs; bool clk_required; + bool has_vregready; int (*selfcalib)(struct stm32_adc *); int (*prepare)(struct stm32_adc *); void (*start_conv)(struct stm32_adc *, bool dma); @@ -695,8 +698,12 @@ static void stm32h7_adc_stop_conv(struct stm32_adc *adc) stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK); } -static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc) +static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc) { + struct iio_dev *indio_dev = iio_priv_to_dev(adc); + int ret; + u32 val; + /* Exit deep power down, then enable ADC voltage regulator */ stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD); stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN); @@ -705,7 +712,20 @@ static void stm32h7_adc_exit_pwr_down(struct stm32_adc *adc) stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST); /* Wait for startup time */ - usleep_range(10, 20); + if (!adc->cfg->has_vregready) { + usleep_range(10, 20); + return 0; + } + + ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val, + val & STM32MP1_VREGREADY, 100, + STM32_ADC_TIMEOUT_US); + if (ret) { + stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD); + dev_err(&indio_dev->dev, "Failed to exit power down\n"); + } + + return ret; } static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc) @@ -888,7 +908,9 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc) int ret; u32 val; - stm32h7_adc_exit_pwr_down(adc); + ret = stm32h7_adc_exit_pwr_down(adc); + if (ret) + return ret; /* * Select calibration mode: @@ -952,7 +974,10 @@ static int stm32h7_adc_prepare(struct stm32_adc *adc) { int ret; - stm32h7_adc_exit_pwr_down(adc); + ret = stm32h7_adc_exit_pwr_down(adc); + if (ret) + return ret; + stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel); ret = stm32h7_adc_enable(adc); @@ -1944,9 +1969,23 @@ static const struct stm32_adc_cfg stm32h7_adc_cfg = { .smp_cycles = stm32h7_adc_smp_cycles, }; +static const struct stm32_adc_cfg stm32mp1_adc_cfg = { + .regs = &stm32h7_adc_regspec, + .adc_info = &stm32h7_adc_info, + .trigs = stm32h7_adc_trigs, + .has_vregready = true, + .selfcalib = stm32h7_adc_selfcalib, + .start_conv = stm32h7_adc_start_conv, + .stop_conv = stm32h7_adc_stop_conv, + .prepare = stm32h7_adc_prepare, + .unprepare = stm32h7_adc_unprepare, + .smp_cycles = stm32h7_adc_smp_cycles, +}; + static const struct of_device_id stm32_adc_of_match[] = { { .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg }, { .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg }, + { .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg }, {}, }; MODULE_DEVICE_TABLE(of, stm32_adc_of_match); diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 01422d11753c..1b78becaba5d 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -253,7 +253,8 @@ static int stm32_dfsdm_start_filter(struct stm32_dfsdm *dfsdm, DFSDM_CR1_RSWSTART(1)); } -static void stm32_dfsdm_stop_filter(struct stm32_dfsdm *dfsdm, unsigned int fl_id) +static void stm32_dfsdm_stop_filter(struct stm32_dfsdm *dfsdm, + unsigned int fl_id) { /* Disable conversion */ regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id), @@ -337,7 +338,7 @@ static int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm, "st,adc-channel-types", chan_idx, &of_str); if (!ret) { - val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_type); + val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_type); if (val < 0) return val; } else { @@ -349,7 +350,7 @@ static int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm, "st,adc-channel-clk-src", chan_idx, &of_str); if (!ret) { - val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_src); + val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_src); if (val < 0) return val; } else { @@ -1093,7 +1094,6 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) char *name; int ret, irq, val; - dev_data = of_device_get_match_data(dev); iio = devm_iio_device_alloc(dev, sizeof(*adc)); if (!iio) { @@ -1111,8 +1111,8 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, adc); ret = of_property_read_u32(dev->of_node, "reg", &adc->fl_id); - if (ret != 0) { - dev_err(dev, "Missing reg property\n"); + if (ret != 0 || adc->fl_id >= adc->dfsdm->num_fls) { + dev_err(dev, "Missing or bad reg property\n"); return -EINVAL; } @@ -1161,7 +1161,6 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) if (ret < 0) goto err_cleanup; - dev_err(dev, "of_platform_populate\n"); if (dev_data->type == DFSDM_AUDIO) { ret = of_platform_populate(np, NULL, NULL, dev); if (ret < 0) { diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index e50efdcc41ff..1d0d8238d9b5 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -227,6 +227,11 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev, } priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1; + if (!priv->spi_clk_out_div) { + /* spi_clk_out_div == 0 means ckout is OFF */ + dev_err(&pdev->dev, "spi-max-frequency not achievable\n"); + return -EINVAL; + } priv->dfsdm.spi_master_freq = spi_freq; if (rem) { diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c index 17b021f33180..0662ca199eb0 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/adc/stx104.c @@ -233,6 +233,16 @@ static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) return !!(inb(stx104gpio->base) & BIT(offset)); } +static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, + unsigned long *bits) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + *bits = inb(stx104gpio->base); + + return 0; +} + static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) { @@ -342,6 +352,7 @@ static int stx104_probe(struct device *dev, unsigned int id) stx104gpio->chip.direction_input = stx104_gpio_direction_input; stx104gpio->chip.direction_output = stx104_gpio_direction_output; stx104gpio->chip.get = stx104_gpio_get; + stx104gpio->chip.get_multiple = stx104_gpio_get_multiple; stx104gpio->chip.set = stx104_gpio_set; stx104gpio->chip.set_multiple = stx104_gpio_set_multiple; stx104gpio->base = base[id] + 3; diff --git a/drivers/iio/afe/Kconfig b/drivers/iio/afe/Kconfig new file mode 100644 index 000000000000..c91eef04825a --- /dev/null +++ b/drivers/iio/afe/Kconfig @@ -0,0 +1,19 @@ +# +# Analog Front End drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Analog Front Ends" + +config IIO_RESCALE + tristate "IIO rescale" + depends on OF || COMPILE_TEST + help + Say yes here to build support for the IIO rescaling + that handles voltage dividers, current sense shunts and + current sense amplifiers. + + To compile this driver as a module, choose M here: the + module will be called iio-rescale. + +endmenu diff --git a/drivers/iio/afe/Makefile b/drivers/iio/afe/Makefile new file mode 100644 index 000000000000..5fabb7bcac47 --- /dev/null +++ b/drivers/iio/afe/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for industrial I/O Analog Front Ends (AFE) +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_IIO_RESCALE) += iio-rescale.o diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c new file mode 100644 index 000000000000..e9ceee66d1e7 --- /dev/null +++ b/drivers/iio/afe/iio-rescale.c @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IIO rescale driver + * + * Copyright (C) 2018 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + */ + +#include <linux/err.h> +#include <linux/gcd.h> +#include <linux/iio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +struct rescale; + +struct rescale_cfg { + enum iio_chan_type type; + int (*props)(struct device *dev, struct rescale *rescale); +}; + +struct rescale { + const struct rescale_cfg *cfg; + struct iio_channel *source; + struct iio_chan_spec chan; + struct iio_chan_spec_ext_info *ext_info; + s32 numerator; + s32 denominator; +}; + +static int rescale_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct rescale *rescale = iio_priv(indio_dev); + unsigned long long tmp; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return iio_read_channel_raw(rescale->source, val); + + case IIO_CHAN_INFO_SCALE: + ret = iio_read_channel_scale(rescale->source, val, val2); + switch (ret) { + case IIO_VAL_FRACTIONAL: + *val *= rescale->numerator; + *val2 *= rescale->denominator; + return ret; + case IIO_VAL_INT: + *val *= rescale->numerator; + if (rescale->denominator == 1) + return ret; + *val2 = rescale->denominator; + return IIO_VAL_FRACTIONAL; + case IIO_VAL_FRACTIONAL_LOG2: + tmp = *val * 1000000000LL; + do_div(tmp, rescale->denominator); + tmp *= rescale->numerator; + do_div(tmp, 1000000000LL); + *val = tmp; + return ret; + default: + return -EOPNOTSUPP; + } + default: + return -EINVAL; + } +} + +static int rescale_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct rescale *rescale = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *type = IIO_VAL_INT; + return iio_read_avail_channel_raw(rescale->source, + vals, length); + default: + return -EINVAL; + } +} + +static const struct iio_info rescale_info = { + .read_raw = rescale_read_raw, + .read_avail = rescale_read_avail, +}; + +static ssize_t rescale_read_ext_info(struct iio_dev *indio_dev, + uintptr_t private, + struct iio_chan_spec const *chan, + char *buf) +{ + struct rescale *rescale = iio_priv(indio_dev); + + return iio_read_channel_ext_info(rescale->source, + rescale->ext_info[private].name, + buf); +} + +static ssize_t rescale_write_ext_info(struct iio_dev *indio_dev, + uintptr_t private, + struct iio_chan_spec const *chan, + const char *buf, size_t len) +{ + struct rescale *rescale = iio_priv(indio_dev); + + return iio_write_channel_ext_info(rescale->source, + rescale->ext_info[private].name, + buf, len); +} + +static int rescale_configure_channel(struct device *dev, + struct rescale *rescale) +{ + struct iio_chan_spec *chan = &rescale->chan; + struct iio_chan_spec const *schan = rescale->source->channel; + + chan->indexed = 1; + chan->output = schan->output; + chan->ext_info = rescale->ext_info; + chan->type = rescale->cfg->type; + + if (!iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) || + !iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) { + dev_err(dev, "source channel does not support raw/scale\n"); + return -EINVAL; + } + + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE); + + if (iio_channel_has_available(schan, IIO_CHAN_INFO_RAW)) + chan->info_mask_separate_available |= BIT(IIO_CHAN_INFO_RAW); + + return 0; +} + +static int rescale_current_sense_amplifier_props(struct device *dev, + struct rescale *rescale) +{ + u32 sense; + u32 gain_mult = 1; + u32 gain_div = 1; + u32 factor; + int ret; + + ret = device_property_read_u32(dev, "sense-resistor-micro-ohms", + &sense); + if (ret) { + dev_err(dev, "failed to read the sense resistance: %d\n", ret); + return ret; + } + + device_property_read_u32(dev, "sense-gain-mult", &gain_mult); + device_property_read_u32(dev, "sense-gain-div", &gain_div); + + /* + * Calculate the scaling factor, 1 / (gain * sense), or + * gain_div / (gain_mult * sense), while trying to keep the + * numerator/denominator from overflowing. + */ + factor = gcd(sense, 1000000); + rescale->numerator = 1000000 / factor; + rescale->denominator = sense / factor; + + factor = gcd(rescale->numerator, gain_mult); + rescale->numerator /= factor; + rescale->denominator *= gain_mult / factor; + + factor = gcd(rescale->denominator, gain_div); + rescale->numerator *= gain_div / factor; + rescale->denominator /= factor; + + return 0; +} + +static int rescale_current_sense_shunt_props(struct device *dev, + struct rescale *rescale) +{ + u32 shunt; + u32 factor; + int ret; + + ret = device_property_read_u32(dev, "shunt-resistor-micro-ohms", + &shunt); + if (ret) { + dev_err(dev, "failed to read the shunt resistance: %d\n", ret); + return ret; + } + + factor = gcd(shunt, 1000000); + rescale->numerator = 1000000 / factor; + rescale->denominator = shunt / factor; + + return 0; +} + +static int rescale_voltage_divider_props(struct device *dev, + struct rescale *rescale) +{ + int ret; + u32 factor; + + ret = device_property_read_u32(dev, "output-ohms", + &rescale->denominator); + if (ret) { + dev_err(dev, "failed to read output-ohms: %d\n", ret); + return ret; + } + + ret = device_property_read_u32(dev, "full-ohms", + &rescale->numerator); + if (ret) { + dev_err(dev, "failed to read full-ohms: %d\n", ret); + return ret; + } + + factor = gcd(rescale->numerator, rescale->denominator); + rescale->numerator /= factor; + rescale->denominator /= factor; + + return 0; +} + +enum rescale_variant { + CURRENT_SENSE_AMPLIFIER, + CURRENT_SENSE_SHUNT, + VOLTAGE_DIVIDER, +}; + +static const struct rescale_cfg rescale_cfg[] = { + [CURRENT_SENSE_AMPLIFIER] = { + .type = IIO_CURRENT, + .props = rescale_current_sense_amplifier_props, + }, + [CURRENT_SENSE_SHUNT] = { + .type = IIO_CURRENT, + .props = rescale_current_sense_shunt_props, + }, + [VOLTAGE_DIVIDER] = { + .type = IIO_VOLTAGE, + .props = rescale_voltage_divider_props, + }, +}; + +static const struct of_device_id rescale_match[] = { + { .compatible = "current-sense-amplifier", + .data = &rescale_cfg[CURRENT_SENSE_AMPLIFIER], }, + { .compatible = "current-sense-shunt", + .data = &rescale_cfg[CURRENT_SENSE_SHUNT], }, + { .compatible = "voltage-divider", + .data = &rescale_cfg[VOLTAGE_DIVIDER], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rescale_match); + +static int rescale_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct iio_channel *source; + struct rescale *rescale; + int sizeof_ext_info; + int sizeof_priv; + int i; + int ret; + + source = devm_iio_channel_get(dev, NULL); + if (IS_ERR(source)) { + if (PTR_ERR(source) != -EPROBE_DEFER) + dev_err(dev, "failed to get source channel\n"); + return PTR_ERR(source); + } + + sizeof_ext_info = iio_get_channel_ext_info_count(source); + if (sizeof_ext_info) { + sizeof_ext_info += 1; /* one extra entry for the sentinel */ + sizeof_ext_info *= sizeof(*rescale->ext_info); + } + + sizeof_priv = sizeof(*rescale) + sizeof_ext_info; + + indio_dev = devm_iio_device_alloc(dev, sizeof_priv); + if (!indio_dev) + return -ENOMEM; + + rescale = iio_priv(indio_dev); + + rescale->cfg = of_device_get_match_data(dev); + rescale->numerator = 1; + rescale->denominator = 1; + + ret = rescale->cfg->props(dev, rescale); + if (ret) + return ret; + + if (!rescale->numerator || !rescale->denominator) { + dev_err(dev, "invalid scaling factor.\n"); + return -EINVAL; + } + + platform_set_drvdata(pdev, indio_dev); + + rescale->source = source; + + indio_dev->name = dev_name(dev); + indio_dev->dev.parent = dev; + indio_dev->info = &rescale_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = &rescale->chan; + indio_dev->num_channels = 1; + if (sizeof_ext_info) { + rescale->ext_info = devm_kmemdup(dev, + source->channel->ext_info, + sizeof_ext_info, GFP_KERNEL); + if (!rescale->ext_info) + return -ENOMEM; + + for (i = 0; rescale->ext_info[i].name; ++i) { + struct iio_chan_spec_ext_info *ext_info = + &rescale->ext_info[i]; + + if (source->channel->ext_info[i].read) + ext_info->read = rescale_read_ext_info; + if (source->channel->ext_info[i].write) + ext_info->write = rescale_write_ext_info; + ext_info->private = i; + } + } + + ret = rescale_configure_channel(dev, rescale); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static struct platform_driver rescale_driver = { + .probe = rescale_probe, + .driver = { + .name = "iio-rescale", + .of_match_table = rescale_match, + }, +}; +module_platform_driver(rescale_driver); + +MODULE_DESCRIPTION("IIO rescale driver"); +MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c index abfc4bbc4cfc..a406ad31b096 100644 --- a/drivers/iio/chemical/atlas-ph-sensor.c +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -61,9 +61,9 @@ #define ATLAS_REG_ORP_CALIB_STATUS 0x0d #define ATLAS_REG_ORP_DATA 0x0e -#define ATLAS_PH_INT_TIME_IN_US 450000 -#define ATLAS_EC_INT_TIME_IN_US 650000 -#define ATLAS_ORP_INT_TIME_IN_US 450000 +#define ATLAS_PH_INT_TIME_IN_MS 450 +#define ATLAS_EC_INT_TIME_IN_MS 650 +#define ATLAS_ORP_INT_TIME_IN_MS 450 enum { ATLAS_PH_SM, @@ -270,21 +270,21 @@ static struct atlas_device atlas_devices[] = { .num_channels = 3, .data_reg = ATLAS_REG_PH_DATA, .calibration = &atlas_check_ph_calibration, - .delay = ATLAS_PH_INT_TIME_IN_US, + .delay = ATLAS_PH_INT_TIME_IN_MS, }, [ATLAS_EC_SM] = { .channels = atlas_ec_channels, .num_channels = 5, .data_reg = ATLAS_REG_EC_DATA, .calibration = &atlas_check_ec_calibration, - .delay = ATLAS_EC_INT_TIME_IN_US, + .delay = ATLAS_EC_INT_TIME_IN_MS, }, [ATLAS_ORP_SM] = { .channels = atlas_orp_channels, .num_channels = 2, .data_reg = ATLAS_REG_ORP_DATA, .calibration = &atlas_check_orp_calibration, - .delay = ATLAS_ORP_INT_TIME_IN_US, + .delay = ATLAS_ORP_INT_TIME_IN_MS, }, }; @@ -393,7 +393,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val) } if (suspended) - usleep_range(data->chip->delay, data->chip->delay + 100000); + msleep(data->chip->delay); ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val)); diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c index 705cb3e72663..89cb0066a6e0 100644 --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> #include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger_consumer.h> @@ -31,8 +32,6 @@ #include <linux/slab.h> #include <linux/sysfs.h> -#include "cros_ec_sensors_core.h" - #define CROS_EC_SENSORS_MAX_CHANNELS 4 /* State data for ec_sensors iio driver. */ diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c index a620eb5ce202..414cc43c287e 100644 --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> #include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger_consumer.h> @@ -27,8 +28,6 @@ #include <linux/sysfs.h> #include <linux/platform_device.h> -#include "cros_ec_sensors_core.h" - static char *cros_ec_loc[] = { [MOTIONSENSE_LOC_BASE] = "base", [MOTIONSENSE_LOC_LID] = "lid", @@ -448,8 +447,7 @@ EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write); static int __maybe_unused cros_ec_sensors_prepare(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); if (st->curr_sampl_freq == 0) @@ -471,8 +469,7 @@ static int __maybe_unused cros_ec_sensors_prepare(struct device *dev) static void __maybe_unused cros_ec_sensors_complete(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); if (st->curr_sampl_freq == 0) diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h deleted file mode 100644 index 2edf68dc7336..000000000000 --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * ChromeOS EC sensor hub - * - * Copyright (C) 2016 Google, Inc - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CROS_EC_SENSORS_CORE_H -#define __CROS_EC_SENSORS_CORE_H - -#include <linux/irqreturn.h> - -enum { - CROS_EC_SENSOR_X, - CROS_EC_SENSOR_Y, - CROS_EC_SENSOR_Z, - CROS_EC_SENSOR_MAX_AXIS, -}; - -/* EC returns sensor values using signed 16 bit registers */ -#define CROS_EC_SENSOR_BITS 16 - -/* - * 4 16 bit channels are allowed. - * Good enough for current sensors, they use up to 3 16 bit vectors. - */ -#define CROS_EC_SAMPLE_SIZE (sizeof(s64) * 2) - -/* Minimum sampling period to use when device is suspending */ -#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000 /* 1 second */ - -/** - * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver - * @ec: cros EC device structure - * @cmd_lock: lock used to prevent simultaneous access to the - * commands. - * @msg: cros EC command structure - * @param: motion sensor parameters structure - * @resp: motion sensor response structure - * @type: type of motion sensor - * @loc: location where the motion sensor is placed - * @calib: calibration parameters. Note that trigger - * captured data will always provide the calibrated - * data - * @samples: static array to hold data from a single capture. - * For each channel we need 2 bytes, except for - * the timestamp. The timestamp is always last and - * is always 8-byte aligned. - * @read_ec_sensors_data: function used for accessing sensors values - * @cuur_sampl_freq: current sampling period - */ -struct cros_ec_sensors_core_state { - struct cros_ec_device *ec; - struct mutex cmd_lock; - - struct cros_ec_command *msg; - struct ec_params_motion_sense param; - struct ec_response_motion_sense *resp; - - enum motionsensor_type type; - enum motionsensor_location loc; - - s16 calib[CROS_EC_SENSOR_MAX_AXIS]; - - u8 samples[CROS_EC_SAMPLE_SIZE]; - - int (*read_ec_sensors_data)(struct iio_dev *indio_dev, - unsigned long scan_mask, s16 *data); - - int curr_sampl_freq; -}; - -/** - * cros_ec_sensors_read_lpc() - retrieve data from EC shared memory - * @indio_dev: pointer to IIO device - * @scan_mask: bitmap of the sensor indices to scan - * @data: location to store data - * - * This is the safe function for reading the EC data. It guarantees that the - * data sampled was not modified by the EC while being read. - * - * Return: 0 on success, -errno on failure. - */ -int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask, - s16 *data); - -/** - * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol - * @indio_dev: pointer to IIO device - * @scan_mask: bitmap of the sensor indices to scan - * @data: location to store data - * - * Return: 0 on success, -errno on failure. - */ -int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask, - s16 *data); - -/** - * cros_ec_sensors_core_init() - basic initialization of the core structure - * @pdev: platform device created for the sensors - * @indio_dev: iio device structure of the device - * @physical_device: true if the device refers to a physical device - * - * Return: 0 on success, -errno on failure. - */ -int cros_ec_sensors_core_init(struct platform_device *pdev, - struct iio_dev *indio_dev, bool physical_device); - -/** - * cros_ec_sensors_capture() - the trigger handler function - * @irq: the interrupt number. - * @p: a pointer to the poll function. - * - * On a trigger event occurring, if the pollfunc is attached then this - * handler is called as a threaded interrupt (and hence may sleep). It - * is responsible for grabbing data from the device and pushing it into - * the associated buffer. - * - * Return: IRQ_HANDLED - */ -irqreturn_t cros_ec_sensors_capture(int irq, void *p); - -/** - * cros_ec_motion_send_host_cmd() - send motion sense host command - * @st: pointer to state information for device - * @opt_length: optional length to reduce the response size, useful on the data - * path. Otherwise, the maximal allowed response size is used - * - * When called, the sub-command is assumed to be set in param->cmd. - * - * Return: 0 on success, -errno on failure. - */ -int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st, - u16 opt_length); - -/** - * cros_ec_sensors_core_read() - function to request a value from the sensor - * @st: pointer to state information for device - * @chan: channel specification structure table - * @val: will contain one element making up the returned value - * @val2: will contain another element making up the returned value - * @mask: specifies which values to be requested - * - * Return: the type of value returned by the device - */ -int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st, - struct iio_chan_spec const *chan, - int *val, int *val2, long mask); - -/** - * cros_ec_sensors_core_write() - function to write a value to the sensor - * @st: pointer to state information for device - * @chan: channel specification structure table - * @val: first part of value to write - * @val2: second part of value to write - * @mask: specifies which values to write - * - * Return: the type of value returned by the device - */ -int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st, - struct iio_chan_spec const *chan, - int val, int val2, long mask); - -extern const struct dev_pm_ops cros_ec_sensors_pm_ops; - -/* List of extended channel specification for all sensors */ -extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[]; - -#endif /* __CROS_EC_SENSORS_CORE_H */ diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index cfb6588565ba..2ce0efd98cc0 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -304,8 +304,7 @@ EXPORT_SYMBOL(hid_sensor_setup_trigger); static int __maybe_unused hid_sensor_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev); return _hid_sensor_power_state(attrb, false); @@ -313,8 +312,7 @@ static int __maybe_unused hid_sensor_suspend(struct device *dev) static int __maybe_unused hid_sensor_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev); schedule_work(&attrb->work); return 0; @@ -322,8 +320,7 @@ static int __maybe_unused hid_sensor_resume(struct device *dev) static int __maybe_unused hid_sensor_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev); return _hid_sensor_power_state(attrb, true); } diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 76db0768e454..06e90debb9f5 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -131,16 +131,31 @@ config LTC2632 module will be called ltc2632. config AD5686 - tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" + tristate + +config AD5686_SPI + tristate "Analog Devices AD5686 and similar multi-channel DACs (SPI)" depends on SPI + select AD5686 help - Say yes here to build support for Analog Devices AD5686R, AD5685R, - AD5684R, AD5791 Voltage Output Digital to - Analog Converter. + Say yes here to build support for Analog Devices AD5672R, AD5676, + AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R. + Voltage Output Digital to Analog Converter. To compile this driver as a module, choose M here: the module will be called ad5686. +config AD5696_I2C + tristate "Analog Devices AD5696 and similar multi-channel DACs (I2C)" + depends on I2C + select AD5686 + help + Say yes here to build support for Analog Devices AD5671R, AD5675R, + AD5694, AD5694R, AD5695R, AD5696, AD5696R Voltage Output Digital to + Analog Converter. + To compile this driver as a module, choose M here: the module will be + called ad5696. + config AD5755 tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver" depends on SPI_MASTER @@ -321,6 +336,16 @@ config TI_DAC082S085 If compiled as a module, it will be called ti-dac082s085. +config TI_DAC5571 + tristate "Texas Instruments 8/10/12/16-bit 1/2/4-channel DAC driver" + depends on I2C + help + Driver for the Texas Instruments + DAC5571, DAC6571, DAC7571, DAC5574, DAC6574, DAC7574, DAC5573, + DAC6573, DAC7573, DAC8571, DAC8574. + + If compiled as a module, it will be called ti-dac5571. + config VF610_DAC tristate "Vybrid vf610 DAC driver" depends on OF diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 81e710ed7491..57aa230d34ab 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -20,6 +20,8 @@ obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o obj-$(CONFIG_AD5791) += ad5791.o obj-$(CONFIG_AD5686) += ad5686.o +obj-$(CONFIG_AD5686_SPI) += ad5686-spi.o +obj-$(CONFIG_AD5696_I2C) += ad5696-i2c.o obj-$(CONFIG_AD7303) += ad7303.o obj-$(CONFIG_AD8801) += ad8801.o obj-$(CONFIG_CIO_DAC) += cio-dac.o @@ -35,4 +37,5 @@ obj-$(CONFIG_MCP4922) += mcp4922.o obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o obj-$(CONFIG_STM32_DAC) += stm32-dac.o obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o +obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c new file mode 100644 index 000000000000..6bb09e9259e6 --- /dev/null +++ b/drivers/iio/dac/ad5686-spi.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD5672R, AD5676, AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R + * Digital to analog converters driver + * + * Copyright 2018 Analog Devices Inc. + */ + +#include "ad5686.h" + +#include <linux/module.h> +#include <linux/spi/spi.h> + +static int ad5686_spi_write(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val) +{ + struct spi_device *spi = to_spi_device(st->dev); + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | + AD5686_ADDR(addr) | + val); + + return spi_write(spi, &st->data[0].d8[1], 3); +} + +static int ad5686_spi_read(struct ad5686_state *st, u8 addr) +{ + struct spi_transfer t[] = { + { + .tx_buf = &st->data[0].d8[1], + .len = 3, + .cs_change = 1, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .len = 3, + }, + }; + struct spi_device *spi = to_spi_device(st->dev); + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) | + AD5686_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP)); + + ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t)); + if (ret < 0) + return ret; + + return be32_to_cpu(st->data[2].d32); +} + +static int ad5686_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad5686_probe(&spi->dev, id->driver_data, id->name, + ad5686_spi_write, ad5686_spi_read); +} + +static int ad5686_spi_remove(struct spi_device *spi) +{ + return ad5686_remove(&spi->dev); +} + +static const struct spi_device_id ad5686_spi_id[] = { + {"ad5672r", ID_AD5672R}, + {"ad5676", ID_AD5676}, + {"ad5676r", ID_AD5676R}, + {"ad5684", ID_AD5684}, + {"ad5684r", ID_AD5684R}, + {"ad5685", ID_AD5685R}, /* Does not exist */ + {"ad5685r", ID_AD5685R}, + {"ad5686", ID_AD5686}, + {"ad5686r", ID_AD5686R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5686_spi_id); + +static struct spi_driver ad5686_spi_driver = { + .driver = { + .name = "ad5686", + }, + .probe = ad5686_spi_probe, + .remove = ad5686_spi_remove, + .id_table = ad5686_spi_id, +}; + +module_spi_driver(ad5686_spi_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5686 and similar multi-channel DACs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index 20254df7f9c7..89c5f089ae7f 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * AD5686R, AD5685R, AD5684R Digital to analog converters driver * * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. */ #include <linux/interrupt.h> @@ -11,7 +10,6 @@ #include <linux/device.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/spi/spi.h> #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/regulator/consumer.h> @@ -19,116 +17,7 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> -#define AD5686_DAC_CHANNELS 4 - -#define AD5686_ADDR(x) ((x) << 16) -#define AD5686_CMD(x) ((x) << 20) - -#define AD5686_ADDR_DAC(chan) (0x1 << (chan)) -#define AD5686_ADDR_ALL_DAC 0xF - -#define AD5686_CMD_NOOP 0x0 -#define AD5686_CMD_WRITE_INPUT_N 0x1 -#define AD5686_CMD_UPDATE_DAC_N 0x2 -#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3 -#define AD5686_CMD_POWERDOWN_DAC 0x4 -#define AD5686_CMD_LDAC_MASK 0x5 -#define AD5686_CMD_RESET 0x6 -#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7 -#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8 -#define AD5686_CMD_READBACK_ENABLE 0x9 - -#define AD5686_LDAC_PWRDN_NONE 0x0 -#define AD5686_LDAC_PWRDN_1K 0x1 -#define AD5686_LDAC_PWRDN_100K 0x2 -#define AD5686_LDAC_PWRDN_3STATE 0x3 - -/** - * struct ad5686_chip_info - chip specific information - * @int_vref_mv: AD5620/40/60: the internal reference voltage - * @channel: channel specification -*/ - -struct ad5686_chip_info { - u16 int_vref_mv; - struct iio_chan_spec channel[AD5686_DAC_CHANNELS]; -}; - -/** - * struct ad5446_state - driver instance specific data - * @spi: spi_device - * @chip_info: chip model specific constants, available modes etc - * @reg: supply regulator - * @vref_mv: actual reference voltage used - * @pwr_down_mask: power down mask - * @pwr_down_mode: current power down mode - * @data: spi transfer buffers - */ - -struct ad5686_state { - struct spi_device *spi; - const struct ad5686_chip_info *chip_info; - struct regulator *reg; - unsigned short vref_mv; - unsigned pwr_down_mask; - unsigned pwr_down_mode; - /* - * DMA (thus cache coherency maintenance) requires the - * transfer buffers to live in their own cache lines. - */ - - union { - __be32 d32; - u8 d8[4]; - } data[3] ____cacheline_aligned; -}; - -/** - * ad5686_supported_device_ids: - */ - -enum ad5686_supported_device_ids { - ID_AD5684, - ID_AD5685, - ID_AD5686, -}; -static int ad5686_spi_write(struct ad5686_state *st, - u8 cmd, u8 addr, u16 val, u8 shift) -{ - val <<= shift; - - st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | - AD5686_ADDR(addr) | - val); - - return spi_write(st->spi, &st->data[0].d8[1], 3); -} - -static int ad5686_spi_read(struct ad5686_state *st, u8 addr) -{ - struct spi_transfer t[] = { - { - .tx_buf = &st->data[0].d8[1], - .len = 3, - .cs_change = 1, - }, { - .tx_buf = &st->data[1].d8[1], - .rx_buf = &st->data[2].d8[1], - .len = 3, - }, - }; - int ret; - - st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) | - AD5686_ADDR(addr)); - st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP)); - - ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); - if (ret < 0) - return ret; - - return be32_to_cpu(st->data[2].d32); -} +#include "ad5686.h" static const char * const ad5686_powerdown_modes[] = { "1kohm_to_gnd", @@ -137,7 +26,7 @@ static const char * const ad5686_powerdown_modes[] = { }; static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan) + const struct iio_chan_spec *chan) { struct ad5686_state *st = iio_priv(indio_dev); @@ -145,7 +34,8 @@ static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev, } static int ad5686_set_powerdown_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, unsigned int mode) + const struct iio_chan_spec *chan, + unsigned int mode) { struct ad5686_state *st = iio_priv(indio_dev); @@ -163,17 +53,19 @@ static const struct iio_enum ad5686_powerdown_mode_enum = { }; static ssize_t ad5686_read_dac_powerdown(struct iio_dev *indio_dev, - uintptr_t private, const struct iio_chan_spec *chan, char *buf) + uintptr_t private, const struct iio_chan_spec *chan, char *buf) { struct ad5686_state *st = iio_priv(indio_dev); return sprintf(buf, "%d\n", !!(st->pwr_down_mask & - (0x3 << (chan->channel * 2)))); + (0x3 << (chan->channel * 2)))); } static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, - uintptr_t private, const struct iio_chan_spec *chan, const char *buf, - size_t len) + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, + size_t len) { bool readin; int ret; @@ -188,8 +80,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, else st->pwr_down_mask &= ~(0x3 << (chan->channel * 2)); - ret = ad5686_spi_write(st, AD5686_CMD_POWERDOWN_DAC, 0, - st->pwr_down_mask & st->pwr_down_mode, 0); + ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, 0, + st->pwr_down_mask & st->pwr_down_mode); + return ret ? ret : len; } @@ -206,7 +99,7 @@ static int ad5686_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); - ret = ad5686_spi_read(st, chan->address); + ret = st->read(st, chan->address); mutex_unlock(&indio_dev->mlock); if (ret < 0) return ret; @@ -221,10 +114,10 @@ static int ad5686_read_raw(struct iio_dev *indio_dev, } static int ad5686_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) { struct ad5686_state *st = iio_priv(indio_dev); int ret; @@ -235,11 +128,10 @@ static int ad5686_write_raw(struct iio_dev *indio_dev, return -EINVAL; mutex_lock(&indio_dev->mlock); - ret = ad5686_spi_write(st, - AD5686_CMD_WRITE_INPUT_N_UPDATE_N, - chan->address, - val, - chan->scan_type.shift); + ret = st->write(st, + AD5686_CMD_WRITE_INPUT_N_UPDATE_N, + chan->address, + val << chan->scan_type.shift); mutex_unlock(&indio_dev->mlock); break; default: @@ -266,14 +158,14 @@ static const struct iio_chan_spec_ext_info ad5686_ext_info[] = { { }, }; -#define AD5868_CHANNEL(chan, bits, _shift) { \ +#define AD5868_CHANNEL(chan, addr, bits, _shift) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ .channel = chan, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ - .address = AD5686_ADDR_DAC(chan), \ + .address = addr, \ .scan_type = { \ .sign = 'u', \ .realbits = (bits), \ @@ -283,45 +175,121 @@ static const struct iio_chan_spec_ext_info ad5686_ext_info[] = { .ext_info = ad5686_ext_info, \ } +#define DECLARE_AD5686_CHANNELS(name, bits, _shift) \ +static struct iio_chan_spec name[] = { \ + AD5868_CHANNEL(0, 1, bits, _shift), \ + AD5868_CHANNEL(1, 2, bits, _shift), \ + AD5868_CHANNEL(2, 4, bits, _shift), \ + AD5868_CHANNEL(3, 8, bits, _shift), \ +} + +#define DECLARE_AD5676_CHANNELS(name, bits, _shift) \ +static struct iio_chan_spec name[] = { \ + AD5868_CHANNEL(0, 0, bits, _shift), \ + AD5868_CHANNEL(1, 1, bits, _shift), \ + AD5868_CHANNEL(2, 2, bits, _shift), \ + AD5868_CHANNEL(3, 3, bits, _shift), \ + AD5868_CHANNEL(4, 4, bits, _shift), \ + AD5868_CHANNEL(5, 5, bits, _shift), \ + AD5868_CHANNEL(6, 6, bits, _shift), \ + AD5868_CHANNEL(7, 7, bits, _shift), \ +} + +DECLARE_AD5676_CHANNELS(ad5672_channels, 12, 4); +DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0); +DECLARE_AD5686_CHANNELS(ad5684_channels, 12, 4); +DECLARE_AD5686_CHANNELS(ad5685r_channels, 14, 2); +DECLARE_AD5686_CHANNELS(ad5686_channels, 16, 0); + static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { + [ID_AD5671R] = { + .channels = ad5672_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, + [ID_AD5672R] = { + .channels = ad5672_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, + [ID_AD5675R] = { + .channels = ad5676_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, + [ID_AD5676] = { + .channels = ad5676_channels, + .num_channels = 8, + }, + [ID_AD5676R] = { + .channels = ad5676_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, [ID_AD5684] = { - .channel[0] = AD5868_CHANNEL(0, 12, 4), - .channel[1] = AD5868_CHANNEL(1, 12, 4), - .channel[2] = AD5868_CHANNEL(2, 12, 4), - .channel[3] = AD5868_CHANNEL(3, 12, 4), + .channels = ad5684_channels, + .num_channels = 4, + }, + [ID_AD5684R] = { + .channels = ad5684_channels, .int_vref_mv = 2500, + .num_channels = 4, }, - [ID_AD5685] = { - .channel[0] = AD5868_CHANNEL(0, 14, 2), - .channel[1] = AD5868_CHANNEL(1, 14, 2), - .channel[2] = AD5868_CHANNEL(2, 14, 2), - .channel[3] = AD5868_CHANNEL(3, 14, 2), + [ID_AD5685R] = { + .channels = ad5685r_channels, .int_vref_mv = 2500, + .num_channels = 4, }, [ID_AD5686] = { - .channel[0] = AD5868_CHANNEL(0, 16, 0), - .channel[1] = AD5868_CHANNEL(1, 16, 0), - .channel[2] = AD5868_CHANNEL(2, 16, 0), - .channel[3] = AD5868_CHANNEL(3, 16, 0), + .channels = ad5686_channels, + .num_channels = 4, + }, + [ID_AD5686R] = { + .channels = ad5686_channels, .int_vref_mv = 2500, + .num_channels = 4, + }, + [ID_AD5694] = { + .channels = ad5684_channels, + .num_channels = 4, + }, + [ID_AD5694R] = { + .channels = ad5684_channels, + .int_vref_mv = 2500, + .num_channels = 4, + }, + [ID_AD5696] = { + .channels = ad5686_channels, + .num_channels = 4, + }, + [ID_AD5696R] = { + .channels = ad5686_channels, + .int_vref_mv = 2500, + .num_channels = 4, }, }; - -static int ad5686_probe(struct spi_device *spi) +int ad5686_probe(struct device *dev, + enum ad5686_supported_device_ids chip_type, + const char *name, ad5686_write_func write, + ad5686_read_func read) { struct ad5686_state *st; struct iio_dev *indio_dev; int ret, voltage_uv = 0; - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); + dev_set_drvdata(dev, indio_dev); + + st->dev = dev; + st->write = write; + st->read = read; - st->reg = devm_regulator_get_optional(&spi->dev, "vcc"); + st->reg = devm_regulator_get_optional(dev, "vcc"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) @@ -334,28 +302,25 @@ static int ad5686_probe(struct spi_device *spi) voltage_uv = ret; } - st->chip_info = - &ad5686_chip_info_tbl[spi_get_device_id(spi)->driver_data]; + st->chip_info = &ad5686_chip_info_tbl[chip_type]; if (voltage_uv) st->vref_mv = voltage_uv / 1000; else st->vref_mv = st->chip_info->int_vref_mv; - st->spi = spi; - /* Set all the power down mode for all channels to 1K pulldown */ st->pwr_down_mode = 0x55; - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = dev; + indio_dev->name = name; indio_dev->info = &ad5686_info; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = st->chip_info->channel; - indio_dev->num_channels = AD5686_DAC_CHANNELS; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; - ret = ad5686_spi_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, 0, - !!voltage_uv, 0); + ret = st->write(st, AD5686_CMD_INTERNAL_REFER_SETUP, + 0, !!voltage_uv); if (ret) goto error_disable_reg; @@ -370,10 +335,11 @@ error_disable_reg: regulator_disable(st->reg); return ret; } +EXPORT_SYMBOL_GPL(ad5686_probe); -static int ad5686_remove(struct spi_device *spi) +int ad5686_remove(struct device *dev) { - struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5686_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); @@ -382,24 +348,7 @@ static int ad5686_remove(struct spi_device *spi) return 0; } - -static const struct spi_device_id ad5686_id[] = { - {"ad5684", ID_AD5684}, - {"ad5685", ID_AD5685}, - {"ad5686", ID_AD5686}, - {} -}; -MODULE_DEVICE_TABLE(spi, ad5686_id); - -static struct spi_driver ad5686_driver = { - .driver = { - .name = "ad5686", - }, - .probe = ad5686_probe, - .remove = ad5686_remove, - .id_table = ad5686_id, -}; -module_spi_driver(ad5686_driver); +EXPORT_SYMBOL_GPL(ad5686_remove); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("Analog Devices AD5686/85/84 DAC"); diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h new file mode 100644 index 000000000000..05f0ce9d2de1 --- /dev/null +++ b/drivers/iio/dac/ad5686.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * This file is part of AD5686 DAC driver + * + * Copyright 2018 Analog Devices Inc. + */ + +#ifndef __DRIVERS_IIO_DAC_AD5686_H__ +#define __DRIVERS_IIO_DAC_AD5686_H__ + +#include <linux/types.h> +#include <linux/cache.h> +#include <linux/mutex.h> +#include <linux/kernel.h> + +#define AD5686_ADDR(x) ((x) << 16) +#define AD5686_CMD(x) ((x) << 20) + +#define AD5686_ADDR_DAC(chan) (0x1 << (chan)) +#define AD5686_ADDR_ALL_DAC 0xF + +#define AD5686_CMD_NOOP 0x0 +#define AD5686_CMD_WRITE_INPUT_N 0x1 +#define AD5686_CMD_UPDATE_DAC_N 0x2 +#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3 +#define AD5686_CMD_POWERDOWN_DAC 0x4 +#define AD5686_CMD_LDAC_MASK 0x5 +#define AD5686_CMD_RESET 0x6 +#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7 +#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8 +#define AD5686_CMD_READBACK_ENABLE 0x9 + +#define AD5686_LDAC_PWRDN_NONE 0x0 +#define AD5686_LDAC_PWRDN_1K 0x1 +#define AD5686_LDAC_PWRDN_100K 0x2 +#define AD5686_LDAC_PWRDN_3STATE 0x3 + +/** + * ad5686_supported_device_ids: + */ +enum ad5686_supported_device_ids { + ID_AD5671R, + ID_AD5672R, + ID_AD5675R, + ID_AD5676, + ID_AD5676R, + ID_AD5684, + ID_AD5684R, + ID_AD5685R, + ID_AD5686, + ID_AD5686R, + ID_AD5694, + ID_AD5694R, + ID_AD5695R, + ID_AD5696, + ID_AD5696R, +}; + +struct ad5686_state; + +typedef int (*ad5686_write_func)(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val); + +typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr); + +/** + * struct ad5686_chip_info - chip specific information + * @int_vref_mv: AD5620/40/60: the internal reference voltage + * @num_channels: number of channels + * @channel: channel specification + */ + +struct ad5686_chip_info { + u16 int_vref_mv; + unsigned int num_channels; + struct iio_chan_spec *channels; +}; + +/** + * struct ad5446_state - driver instance specific data + * @spi: spi_device + * @chip_info: chip model specific constants, available modes etc + * @reg: supply regulator + * @vref_mv: actual reference voltage used + * @pwr_down_mask: power down mask + * @pwr_down_mode: current power down mode + * @data: spi transfer buffers + */ + +struct ad5686_state { + struct device *dev; + const struct ad5686_chip_info *chip_info; + struct regulator *reg; + unsigned short vref_mv; + unsigned int pwr_down_mask; + unsigned int pwr_down_mode; + ad5686_write_func write; + ad5686_read_func read; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + + union { + __be32 d32; + __be16 d16; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + + +int ad5686_probe(struct device *dev, + enum ad5686_supported_device_ids chip_type, + const char *name, ad5686_write_func write, + ad5686_read_func read); + +int ad5686_remove(struct device *dev); + + +#endif /* __DRIVERS_IIO_DAC_AD5686_H__ */ diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c new file mode 100644 index 000000000000..275e0321bcf8 --- /dev/null +++ b/drivers/iio/dac/ad5696-i2c.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696, AD5696R + * Digital to analog converters driver + * + * Copyright 2018 Analog Devices Inc. + */ + +#include "ad5686.h" + +#include <linux/module.h> +#include <linux/i2c.h> + +static int ad5686_i2c_read(struct ad5686_state *st, u8 addr) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + struct i2c_msg msg[2] = { + { + .addr = i2c->addr, + .flags = i2c->flags, + .len = 3, + .buf = &st->data[0].d8[1], + }, + { + .addr = i2c->addr, + .flags = i2c->flags | I2C_M_RD, + .len = 2, + .buf = (char *)&st->data[0].d16, + }, + }; + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP) | + AD5686_ADDR(addr) | + 0x00); + + ret = i2c_transfer(i2c->adapter, msg, 2); + if (ret < 0) + return ret; + + return be16_to_cpu(st->data[0].d16); +} + +static int ad5686_i2c_write(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | AD5686_ADDR(addr) + | val); + + ret = i2c_master_send(i2c, &st->data[0].d8[1], 3); + if (ret < 0) + return ret; + + return (ret != 3) ? -EIO : 0; +} + +static int ad5686_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + return ad5686_probe(&i2c->dev, id->driver_data, id->name, + ad5686_i2c_write, ad5686_i2c_read); +} + +static int ad5686_i2c_remove(struct i2c_client *i2c) +{ + return ad5686_remove(&i2c->dev); +} + +static const struct i2c_device_id ad5686_i2c_id[] = { + {"ad5671r", ID_AD5671R}, + {"ad5675r", ID_AD5675R}, + {"ad5694", ID_AD5694}, + {"ad5694r", ID_AD5694R}, + {"ad5695r", ID_AD5695R}, + {"ad5696", ID_AD5696}, + {"ad5696r", ID_AD5696R}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ad5686_i2c_id); + +static struct i2c_driver ad5686_i2c_driver = { + .driver = { + .name = "ad5696", + }, + .probe = ad5686_i2c_probe, + .remove = ad5686_i2c_remove, + .id_table = ad5686_i2c_id, +}; + +module_i2c_driver(ad5686_i2c_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5686 and similar multi-channel DACs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c new file mode 100644 index 000000000000..dd21eebed6a8 --- /dev/null +++ b/drivers/iio/dac/ti-dac5571.c @@ -0,0 +1,439 @@ +/* + * ti-dac5571.c - Texas Instruments 8/10/12-bit 1/4-channel DAC driver + * + * Copyright (C) 2018 Prevas A/S + * + * http://www.ti.com/lit/ds/symlink/dac5571.pdf + * http://www.ti.com/lit/ds/symlink/dac6571.pdf + * http://www.ti.com/lit/ds/symlink/dac7571.pdf + * http://www.ti.com/lit/ds/symlink/dac5574.pdf + * http://www.ti.com/lit/ds/symlink/dac6574.pdf + * http://www.ti.com/lit/ds/symlink/dac7574.pdf + * http://www.ti.com/lit/ds/symlink/dac5573.pdf + * http://www.ti.com/lit/ds/symlink/dac6573.pdf + * http://www.ti.com/lit/ds/symlink/dac7573.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2) as + * published by the Free Software Foundation. + */ + +#include <linux/iio/iio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +enum chip_id { + single_8bit, single_10bit, single_12bit, + quad_8bit, quad_10bit, quad_12bit +}; + +struct dac5571_spec { + u8 num_channels; + u8 resolution; +}; + +static const struct dac5571_spec dac5571_spec[] = { + [single_8bit] = {.num_channels = 1, .resolution = 8}, + [single_10bit] = {.num_channels = 1, .resolution = 10}, + [single_12bit] = {.num_channels = 1, .resolution = 12}, + [quad_8bit] = {.num_channels = 4, .resolution = 8}, + [quad_10bit] = {.num_channels = 4, .resolution = 10}, + [quad_12bit] = {.num_channels = 4, .resolution = 12}, +}; + +struct dac5571_data { + struct i2c_client *client; + int id; + struct mutex lock; + struct regulator *vref; + u16 val[4]; + bool powerdown; + u8 powerdown_mode; + struct dac5571_spec const *spec; + int (*dac5571_cmd)(struct dac5571_data *data, int channel, u16 val); + int (*dac5571_pwrdwn)(struct dac5571_data *data, int channel, u8 pwrdwn); + u8 buf[3] ____cacheline_aligned; +}; + +#define DAC5571_POWERDOWN(mode) ((mode) + 1) +#define DAC5571_POWERDOWN_FLAG BIT(0) +#define DAC5571_CHANNEL_SELECT 1 +#define DAC5571_LOADMODE_DIRECT BIT(4) +#define DAC5571_SINGLE_PWRDWN_BITS 4 +#define DAC5571_QUAD_PWRDWN_BITS 6 + +static int dac5571_cmd_single(struct dac5571_data *data, int channel, u16 val) +{ + unsigned int shift; + + shift = 12 - data->spec->resolution; + data->buf[1] = val << shift; + data->buf[0] = val >> (8 - shift); + + if (i2c_master_send(data->client, data->buf, 2) != 2) + return -EIO; + + return 0; +} + +static int dac5571_cmd_quad(struct dac5571_data *data, int channel, u16 val) +{ + unsigned int shift; + + shift = 16 - data->spec->resolution; + data->buf[2] = val << shift; + data->buf[1] = (val >> (8 - shift)); + data->buf[0] = (channel << DAC5571_CHANNEL_SELECT) | + DAC5571_LOADMODE_DIRECT; + + if (i2c_master_send(data->client, data->buf, 3) != 3) + return -EIO; + + return 0; +} + +static int dac5571_pwrdwn_single(struct dac5571_data *data, int channel, u8 pwrdwn) +{ + unsigned int shift; + + shift = 12 - data->spec->resolution; + data->buf[1] = 0; + data->buf[0] = pwrdwn << DAC5571_SINGLE_PWRDWN_BITS; + + if (i2c_master_send(data->client, data->buf, 2) != 2) + return -EIO; + + return 0; +} + +static int dac5571_pwrdwn_quad(struct dac5571_data *data, int channel, u8 pwrdwn) +{ + unsigned int shift; + + shift = 16 - data->spec->resolution; + data->buf[2] = 0; + data->buf[1] = pwrdwn << DAC5571_QUAD_PWRDWN_BITS; + data->buf[0] = (channel << DAC5571_CHANNEL_SELECT) | + DAC5571_LOADMODE_DIRECT | DAC5571_POWERDOWN_FLAG; + + if (i2c_master_send(data->client, data->buf, 3) != 3) + return -EIO; + + return 0; +} + +static const char *const dac5571_powerdown_modes[] = { + "1kohm_to_gnd", "100kohm_to_gnd", "three_state", +}; + +static int dac5571_get_powerdown_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct dac5571_data *data = iio_priv(indio_dev); + + return data->powerdown_mode; +} + +static int dac5571_set_powerdown_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct dac5571_data *data = iio_priv(indio_dev); + int ret = 0; + + if (data->powerdown_mode == mode) + return 0; + + mutex_lock(&data->lock); + if (data->powerdown) { + ret = data->dac5571_pwrdwn(data, chan->channel, + DAC5571_POWERDOWN(mode)); + if (ret) + goto out; + } + data->powerdown_mode = mode; + + out: + mutex_unlock(&data->lock); + + return ret; +} + +static const struct iio_enum dac5571_powerdown_mode = { + .items = dac5571_powerdown_modes, + .num_items = ARRAY_SIZE(dac5571_powerdown_modes), + .get = dac5571_get_powerdown_mode, + .set = dac5571_set_powerdown_mode, +}; + +static ssize_t dac5571_read_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct dac5571_data *data = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", data->powerdown); +} + +static ssize_t dac5571_write_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct dac5571_data *data = iio_priv(indio_dev); + bool powerdown; + int ret; + + ret = strtobool(buf, &powerdown); + if (ret) + return ret; + + if (data->powerdown == powerdown) + return len; + + mutex_lock(&data->lock); + if (powerdown) + ret = data->dac5571_pwrdwn(data, chan->channel, + DAC5571_POWERDOWN(data->powerdown_mode)); + else + ret = data->dac5571_cmd(data, chan->channel, data->val[0]); + if (ret) + goto out; + + data->powerdown = powerdown; + + out: + mutex_unlock(&data->lock); + + return ret ? ret : len; +} + + +static const struct iio_chan_spec_ext_info dac5571_ext_info[] = { + { + .name = "powerdown", + .read = dac5571_read_powerdown, + .write = dac5571_write_powerdown, + .shared = IIO_SHARED_BY_TYPE, + }, + IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE, &dac5571_powerdown_mode), + IIO_ENUM_AVAILABLE("powerdown_mode", &dac5571_powerdown_mode), + {}, +}; + +#define dac5571_CHANNEL(chan, name) { \ + .type = IIO_VOLTAGE, \ + .channel = (chan), \ + .address = (chan), \ + .indexed = true, \ + .output = true, \ + .datasheet_name = name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = dac5571_ext_info, \ +} + +static const struct iio_chan_spec dac5571_channels[] = { + dac5571_CHANNEL(0, "A"), + dac5571_CHANNEL(1, "B"), + dac5571_CHANNEL(2, "C"), + dac5571_CHANNEL(3, "D"), +}; + +static int dac5571_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct dac5571_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *val = data->val[chan->channel]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + ret = regulator_get_voltage(data->vref); + if (ret < 0) + return ret; + + *val = ret / 1000; + *val2 = data->spec->resolution; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static int dac5571_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct dac5571_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (data->val[chan->channel] == val) + return 0; + + if (val >= (1 << data->spec->resolution) || val < 0) + return -EINVAL; + + if (data->powerdown) + return -EBUSY; + + mutex_lock(&data->lock); + ret = data->dac5571_cmd(data, chan->channel, val); + if (ret == 0) + data->val[chan->channel] = val; + mutex_unlock(&data->lock); + return ret; + + default: + return -EINVAL; + } +} + +static int dac5571_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + return IIO_VAL_INT; +} + +static const struct iio_info dac5571_info = { + .read_raw = dac5571_read_raw, + .write_raw = dac5571_write_raw, + .write_raw_get_fmt = dac5571_write_raw_get_fmt, +}; + +static int dac5571_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct dac5571_spec *spec; + struct dac5571_data *data; + struct iio_dev *indio_dev; + int ret, i; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + indio_dev->dev.parent = dev; + indio_dev->dev.of_node = client->dev.of_node; + indio_dev->info = &dac5571_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = dac5571_channels; + + spec = &dac5571_spec[id->driver_data]; + indio_dev->num_channels = spec->num_channels; + data->spec = spec; + + data->vref = devm_regulator_get(dev, "vref"); + if (IS_ERR(data->vref)) + return PTR_ERR(data->vref); + + ret = regulator_enable(data->vref); + if (ret < 0) + return ret; + + mutex_init(&data->lock); + + switch (spec->num_channels) { + case 1: + data->dac5571_cmd = dac5571_cmd_single; + data->dac5571_pwrdwn = dac5571_pwrdwn_single; + break; + case 4: + data->dac5571_cmd = dac5571_cmd_quad; + data->dac5571_pwrdwn = dac5571_pwrdwn_quad; + break; + default: + goto err; + } + + for (i = 0; i < spec->num_channels; i++) { + ret = data->dac5571_cmd(data, i, 0); + if (ret) { + dev_err(dev, "failed to initialize channel %d to 0\n", i); + goto err; + } + } + + ret = iio_device_register(indio_dev); + if (ret) + goto err; + + return 0; + + err: + regulator_disable(data->vref); + return ret; +} + +static int dac5571_remove(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct dac5571_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regulator_disable(data->vref); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id dac5571_of_id[] = { + {.compatible = "ti,dac5571"}, + {.compatible = "ti,dac6571"}, + {.compatible = "ti,dac7571"}, + {.compatible = "ti,dac5574"}, + {.compatible = "ti,dac6574"}, + {.compatible = "ti,dac7574"}, + {.compatible = "ti,dac5573"}, + {.compatible = "ti,dac6573"}, + {.compatible = "ti,dac7573"}, + {} +}; +MODULE_DEVICE_TABLE(of, dac5571_of_id); +#endif + +static const struct i2c_device_id dac5571_id[] = { + {"dac5571", single_8bit}, + {"dac6571", single_10bit}, + {"dac7571", single_12bit}, + {"dac5574", quad_8bit}, + {"dac6574", quad_10bit}, + {"dac7574", quad_12bit}, + {"dac5573", quad_8bit}, + {"dac6573", quad_10bit}, + {"dac7573", quad_12bit}, + {} +}; +MODULE_DEVICE_TABLE(i2c, dac5571_id); + +static struct i2c_driver dac5571_driver = { + .driver = { + .name = "ti-dac5571", + }, + .probe = dac5571_probe, + .remove = dac5571_remove, + .id_table = dac5571_id, +}; +module_i2c_driver(dac5571_driver); + +MODULE_AUTHOR("Sean Nyekjaer <sean.nyekjaer@prevas.dk>"); +MODULE_DESCRIPTION("Texas Instruments 8/10/12-bit 1/4-channel DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 7d64be353403..43fba5f7532b 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -24,6 +24,7 @@ #include <linux/spinlock.h> #include <linux/iio/iio.h> #include <linux/acpi.h> +#include <linux/platform_device.h> #include "inv_mpu_iio.h" /* @@ -52,6 +53,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = { .raw_accl = INV_MPU6050_REG_RAW_ACCEL, .temperature = INV_MPU6050_REG_TEMPERATURE, .int_enable = INV_MPU6050_REG_INT_ENABLE, + .int_status = INV_MPU6050_REG_INT_STATUS, .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, @@ -86,6 +88,7 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = { .gyro_fifo_enable = false, .accl_fifo_enable = false, .accl_fs = INV_MPU6050_FS_02G, + .user_ctrl = 0, }; /* Indexed by enum inv_devices */ @@ -121,6 +124,12 @@ static const struct inv_mpu6050_hw hw_info[] = { .config = &chip_config_6050, }, { + .whoami = INV_MPU9255_WHOAMI_VALUE, + .name = "MPU9255", + .reg = ®_set_6500, + .config = &chip_config_6050, + }, + { .whoami = INV_ICM20608_WHOAMI_VALUE, .name = "ICM20608", .reg = ®_set_6500, @@ -168,7 +177,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) return result; if (en) { - /* Wait for output stabilize */ + /* Wait for output to stabilize */ msleep(INV_MPU6050_TEMP_UP_TIME); if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { /* switch internal clock to PLL */ @@ -185,26 +194,29 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) { - int result = 0; + int result; if (power_on) { - if (!st->powerup_count) + if (!st->powerup_count) { result = regmap_write(st->map, st->reg->pwr_mgmt_1, 0); - if (!result) - st->powerup_count++; + if (result) + return result; + usleep_range(INV_MPU6050_REG_UP_TIME_MIN, + INV_MPU6050_REG_UP_TIME_MAX); + } + st->powerup_count++; } else { - st->powerup_count--; - if (!st->powerup_count) + if (st->powerup_count == 1) { result = regmap_write(st->map, st->reg->pwr_mgmt_1, INV_MPU6050_BIT_SLEEP); + if (result) + return result; + } + st->powerup_count--; } - if (result) - return result; - - if (power_on) - usleep_range(INV_MPU6050_REG_UP_TIME_MIN, - INV_MPU6050_REG_UP_TIME_MAX); + dev_dbg(regmap_get_device(st->map), "set power %d, count=%u\n", + power_on, st->powerup_count); return 0; } @@ -262,26 +274,33 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); result = regmap_write(st->map, st->reg->gyro_config, d); if (result) - return result; + goto error_power_off; result = inv_mpu6050_set_lpf_regs(st, INV_MPU6050_FILTER_20HZ); if (result) - return result; + goto error_power_off; d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) - return result; + goto error_power_off; d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); result = regmap_write(st->map, st->reg->accl_config, d); if (result) + goto error_power_off; + + result = regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask); + if (result) return result; memcpy(&st->chip_config, hw_info[st->chip_type].config, sizeof(struct inv_mpu6050_chip_config)); - result = inv_mpu6050_set_power_itg(st, false); + return inv_mpu6050_set_power_itg(st, false); + +error_power_off: + inv_mpu6050_set_power_itg(st, false); return result; } @@ -314,6 +333,65 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, return IIO_VAL_INT; } +static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int result; + int ret; + + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + + switch (chan->type) { + case IIO_ANGL_VEL: + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_power_off; + ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, + chan->channel2, val); + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_power_off; + break; + case IIO_ACCEL: + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_power_off; + ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, + chan->channel2, val); + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_power_off; + break; + case IIO_TEMP: + /* wait for stablization */ + msleep(INV_MPU6050_SENSOR_UP_TIME); + ret = inv_mpu6050_sensor_show(st, st->reg->temperature, + IIO_MOD_X, val); + break; + default: + ret = -EINVAL; + break; + } + + result = inv_mpu6050_set_power_itg(st, false); + if (result) + goto error_power_off; + + return ret; + +error_power_off: + inv_mpu6050_set_power_itg(st, false); + return result; +} + static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, @@ -324,63 +402,14 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - { - int result; - - ret = IIO_VAL_INT; + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; mutex_lock(&st->lock); - result = iio_device_claim_direct_mode(indio_dev); - if (result) - goto error_read_raw_unlock; - result = inv_mpu6050_set_power_itg(st, true); - if (result) - goto error_read_raw_release; - switch (chan->type) { - case IIO_ANGL_VEL: - result = inv_mpu6050_switch_engine(st, true, - INV_MPU6050_BIT_PWR_GYRO_STBY); - if (result) - goto error_read_raw_power_off; - ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, - chan->channel2, val); - result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_GYRO_STBY); - if (result) - goto error_read_raw_power_off; - break; - case IIO_ACCEL: - result = inv_mpu6050_switch_engine(st, true, - INV_MPU6050_BIT_PWR_ACCL_STBY); - if (result) - goto error_read_raw_power_off; - ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, - chan->channel2, val); - result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_ACCL_STBY); - if (result) - goto error_read_raw_power_off; - break; - case IIO_TEMP: - /* wait for stablization */ - msleep(INV_MPU6050_SENSOR_UP_TIME); - ret = inv_mpu6050_sensor_show(st, st->reg->temperature, - IIO_MOD_X, val); - break; - default: - ret = -EINVAL; - break; - } -error_read_raw_power_off: - result |= inv_mpu6050_set_power_itg(st, false); -error_read_raw_release: - iio_device_release_direct_mode(indio_dev); -error_read_raw_unlock: + ret = inv_mpu6050_read_channel_data(indio_dev, chan, val); mutex_unlock(&st->lock); - if (result) - return result; - + iio_device_release_direct_mode(indio_dev); return ret; - } case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ANGL_VEL: @@ -502,17 +531,18 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, struct inv_mpu6050_state *st = iio_priv(indio_dev); int result; - mutex_lock(&st->lock); /* * we should only update scale when the chip is disabled, i.e. * not running */ result = iio_device_claim_direct_mode(indio_dev); if (result) - goto error_write_raw_unlock; + return result; + + mutex_lock(&st->lock); result = inv_mpu6050_set_power_itg(st, true); if (result) - goto error_write_raw_release; + goto error_write_raw_unlock; switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -551,10 +581,9 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, } result |= inv_mpu6050_set_power_itg(st, false); -error_write_raw_release: - iio_device_release_direct_mode(indio_dev); error_write_raw_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return result; } @@ -613,17 +642,18 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate > INV_MPU6050_MAX_FIFO_RATE) return -EINVAL; + result = iio_device_claim_direct_mode(indio_dev); + if (result) + return result; + mutex_lock(&st->lock); if (fifo_rate == st->chip_config.fifo_rate) { result = 0; goto fifo_rate_fail_unlock; } - result = iio_device_claim_direct_mode(indio_dev); - if (result) - goto fifo_rate_fail_unlock; result = inv_mpu6050_set_power_itg(st, true); if (result) - goto fifo_rate_fail_release; + goto fifo_rate_fail_unlock; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; result = regmap_write(st->map, st->reg->sample_rate_div, d); @@ -637,10 +667,9 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, fifo_rate_fail_power_off: result |= inv_mpu6050_set_power_itg(st, false); -fifo_rate_fail_release: - iio_device_release_direct_mode(indio_dev); fifo_rate_fail_unlock: mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); if (result) return result; @@ -850,14 +879,11 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) msleep(INV_MPU6050_POWER_UP_TIME); /* - * toggle power state. After reset, the sleep bit could be on - * or off depending on the OTP settings. Toggling power would + * Turn power on. After reset, the sleep bit could be on + * or off depending on the OTP settings. Turning power on * make it in a definite state as well as making the hardware * state align with the software state */ - result = inv_mpu6050_set_power_itg(st, false); - if (result) - return result; result = inv_mpu6050_set_power_itg(st, true); if (result) return result; @@ -865,13 +891,17 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) - return result; + goto error_power_off; result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) - return result; + goto error_power_off; - return 0; + return inv_mpu6050_set_power_itg(st, false); + +error_power_off: + inv_mpu6050_set_power_itg(st, false); + return result; } int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, @@ -882,6 +912,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, struct inv_mpu6050_platform_data *pdata; struct device *dev = regmap_get_device(regmap); int result; + struct irq_data *desc; + int irq_type; indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (!indio_dev) @@ -913,20 +945,43 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, st->plat_data = *pdata; } + desc = irq_get_irq_data(irq); + if (!desc) { + dev_err(dev, "Could not find IRQ %d\n", irq); + return -EINVAL; + } + + irq_type = irqd_get_trigger_type(desc); + if (irq_type == IRQF_TRIGGER_RISING) + st->irq_mask = INV_MPU6050_ACTIVE_HIGH; + else if (irq_type == IRQF_TRIGGER_FALLING) + st->irq_mask = INV_MPU6050_ACTIVE_LOW; + else if (irq_type == IRQF_TRIGGER_HIGH) + st->irq_mask = INV_MPU6050_ACTIVE_HIGH | + INV_MPU6050_LATCH_INT_EN; + else if (irq_type == IRQF_TRIGGER_LOW) + st->irq_mask = INV_MPU6050_ACTIVE_LOW | + INV_MPU6050_LATCH_INT_EN; + else { + dev_err(dev, "Invalid interrupt type 0x%x specified\n", + irq_type); + return -EINVAL; + } + /* power is turned on inside check chip type*/ result = inv_check_and_setup_chip(st); if (result) return result; - if (inv_mpu_bus_setup) - inv_mpu_bus_setup(indio_dev); - result = inv_mpu6050_init_config(indio_dev); if (result) { dev_err(dev, "Could not initialize device.\n"); return result; } + if (inv_mpu_bus_setup) + inv_mpu_bus_setup(indio_dev); + dev_set_drvdata(dev, indio_dev); indio_dev->dev.parent = dev; /* name will be NULL when enumerated via ACPI */ @@ -940,50 +995,32 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, indio_dev->info = &mpu_info; indio_dev->modes = INDIO_BUFFER_TRIGGERED; - result = iio_triggered_buffer_setup(indio_dev, - inv_mpu6050_irq_handler, - inv_mpu6050_read_fifo, - NULL); + result = devm_iio_triggered_buffer_setup(dev, indio_dev, + inv_mpu6050_irq_handler, + inv_mpu6050_read_fifo, + NULL); if (result) { dev_err(dev, "configure buffer fail %d\n", result); return result; } - result = inv_mpu6050_probe_trigger(indio_dev); + result = inv_mpu6050_probe_trigger(indio_dev, irq_type); if (result) { dev_err(dev, "trigger probe fail %d\n", result); - goto out_unreg_ring; + return result; } INIT_KFIFO(st->timestamps); spin_lock_init(&st->time_stamp_lock); - result = iio_device_register(indio_dev); + result = devm_iio_device_register(dev, indio_dev); if (result) { dev_err(dev, "IIO register fail %d\n", result); - goto out_remove_trigger; + return result; } return 0; - -out_remove_trigger: - inv_mpu6050_remove_trigger(st); -out_unreg_ring: - iio_triggered_buffer_cleanup(indio_dev); - return result; } EXPORT_SYMBOL_GPL(inv_mpu_core_probe); -int inv_mpu_core_remove(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - - iio_device_unregister(indio_dev); - inv_mpu6050_remove_trigger(iio_priv(indio_dev)); - iio_triggered_buffer_cleanup(indio_dev); - - return 0; -} -EXPORT_SYMBOL_GPL(inv_mpu_core_remove); - #ifdef CONFIG_PM_SLEEP static int inv_mpu_resume(struct device *dev) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index fcd7a92b6cf8..495409d56207 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -29,25 +29,18 @@ static int inv_mpu6050_select_bypass(struct i2c_mux_core *muxc, u32 chan_id) { struct iio_dev *indio_dev = i2c_mux_priv(muxc); struct inv_mpu6050_state *st = iio_priv(indio_dev); - int ret = 0; + int ret; - /* Use the same mutex which was used everywhere to protect power-op */ mutex_lock(&st->lock); - if (!st->powerup_count) { - ret = regmap_write(st->map, st->reg->pwr_mgmt_1, 0); - if (ret) - goto write_error; - usleep_range(INV_MPU6050_REG_UP_TIME_MIN, - INV_MPU6050_REG_UP_TIME_MAX); - } - if (!ret) { - st->powerup_count++; - ret = regmap_write(st->map, st->reg->int_pin_cfg, - INV_MPU6050_INT_PIN_CFG | - INV_MPU6050_BIT_BYPASS_EN); - } -write_error: + ret = inv_mpu6050_set_power_itg(st, true); + if (ret) + goto error_unlock; + + ret = regmap_write(st->map, st->reg->int_pin_cfg, + st->irq_mask | INV_MPU6050_BIT_BYPASS_EN); + +error_unlock: mutex_unlock(&st->lock); return ret; @@ -59,12 +52,11 @@ static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id) struct inv_mpu6050_state *st = iio_priv(indio_dev); mutex_lock(&st->lock); - /* It doesn't really mattter, if any of the calls fails */ - regmap_write(st->map, st->reg->int_pin_cfg, INV_MPU6050_INT_PIN_CFG); - st->powerup_count--; - if (!st->powerup_count) - regmap_write(st->map, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); + + /* It doesn't really matter if any of the calls fail */ + regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask); + inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&st->lock); return 0; @@ -133,29 +125,32 @@ static int inv_mpu_probe(struct i2c_client *client, return result; st = iio_priv(dev_get_drvdata(&client->dev)); - st->muxc = i2c_mux_alloc(client->adapter, &client->dev, - 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE, - inv_mpu6050_select_bypass, - inv_mpu6050_deselect_bypass); - if (!st->muxc) { - result = -ENOMEM; - goto out_unreg_device; + switch (st->chip_type) { + case INV_ICM20608: + /* no i2c auxiliary bus on the chip */ + break; + default: + /* declare i2c auxiliary bus */ + st->muxc = i2c_mux_alloc(client->adapter, &client->dev, + 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE, + inv_mpu6050_select_bypass, + inv_mpu6050_deselect_bypass); + if (!st->muxc) + return -ENOMEM; + st->muxc->priv = dev_get_drvdata(&client->dev); + result = i2c_mux_add_adapter(st->muxc, 0, 0, 0); + if (result) + return result; + result = inv_mpu_acpi_create_mux_client(client); + if (result) + goto out_del_mux; + break; } - st->muxc->priv = dev_get_drvdata(&client->dev); - result = i2c_mux_add_adapter(st->muxc, 0, 0, 0); - if (result) - goto out_unreg_device; - - result = inv_mpu_acpi_create_mux_client(client); - if (result) - goto out_del_mux; return 0; out_del_mux: i2c_mux_del_adapters(st->muxc); -out_unreg_device: - inv_mpu_core_remove(&client->dev); return result; } @@ -164,10 +159,12 @@ static int inv_mpu_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); struct inv_mpu6050_state *st = iio_priv(indio_dev); - inv_mpu_acpi_delete_mux_client(client); - i2c_mux_del_adapters(st->muxc); + if (st->muxc) { + inv_mpu_acpi_delete_mux_client(client); + i2c_mux_del_adapters(st->muxc); + } - return inv_mpu_core_remove(&client->dev); + return 0; } /* @@ -179,6 +176,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu6500", INV_MPU6500}, {"mpu9150", INV_MPU9150}, {"mpu9250", INV_MPU9250}, + {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, {} }; @@ -203,6 +201,10 @@ static const struct of_device_id inv_of_match[] = { .data = (void *)INV_MPU9250 }, { + .compatible = "invensense,mpu9255", + .data = (void *)INV_MPU9255 + }, + { .compatible = "invensense,icm20608", .data = (void *)INV_ICM20608 }, diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index 065794162d65..c54da777945d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -40,6 +40,7 @@ * @raw_accl: Address of first accel register. * @temperature: temperature register * @int_enable: Interrupt enable register. + * @int_status: Interrupt status register. * @pwr_mgmt_1: Controls chip's power state and clock source. * @pwr_mgmt_2: Controls power state of individual sensors. * @int_pin_cfg; Controls interrupt pin configuration. @@ -60,6 +61,7 @@ struct inv_mpu6050_reg_map { u8 raw_accl; u8 temperature; u8 int_enable; + u8 int_status; u8 pwr_mgmt_1; u8 pwr_mgmt_2; u8 int_pin_cfg; @@ -74,6 +76,7 @@ enum inv_devices { INV_MPU6000, INV_MPU9150, INV_MPU9250, + INV_MPU9255, INV_ICM20608, INV_NUM_PARTS }; @@ -94,6 +97,7 @@ struct inv_mpu6050_chip_config { unsigned int accl_fifo_enable:1; unsigned int gyro_fifo_enable:1; u16 fifo_rate; + u8 user_ctrl; }; /** @@ -125,6 +129,7 @@ struct inv_mpu6050_hw { * @timestamps: kfifo queue to store time stamp. * @map regmap pointer. * @irq interrupt number. + * @irq_mask the int_pin_cfg mask to configure interrupt type. */ struct inv_mpu6050_state { #define TIMESTAMP_FIFO_SIZE 16 @@ -143,6 +148,8 @@ struct inv_mpu6050_state { DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); struct regmap *map; int irq; + u8 irq_mask; + unsigned skip_samples; }; /*register and associated bit definition*/ @@ -166,6 +173,9 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_TEMPERATURE 0x41 #define INV_MPU6050_REG_RAW_GYRO 0x43 +#define INV_MPU6050_REG_INT_STATUS 0x3A +#define INV_MPU6050_BIT_RAW_DATA_RDY_INT 0x01 + #define INV_MPU6050_REG_USER_CTRL 0x6A #define INV_MPU6050_BIT_FIFO_RST 0x04 #define INV_MPU6050_BIT_DMP_RST 0x08 @@ -215,8 +225,12 @@ struct inv_mpu6050_state { #define INV_MPU6050_OUTPUT_DATA_SIZE 24 #define INV_MPU6050_REG_INT_PIN_CFG 0x37 +#define INV_MPU6050_ACTIVE_HIGH 0x00 +#define INV_MPU6050_ACTIVE_LOW 0x80 +/* enable level triggering */ +#define INV_MPU6050_LATCH_INT_EN 0x20 #define INV_MPU6050_BIT_BYPASS_EN 0x2 -#define INV_MPU6050_INT_PIN_CFG 0 + /* init parameters */ #define INV_MPU6050_INIT_FIFO_RATE 50 @@ -232,6 +246,7 @@ struct inv_mpu6050_state { #define INV_MPU6500_WHOAMI_VALUE 0x70 #define INV_MPU9150_WHOAMI_VALUE 0x68 #define INV_MPU9250_WHOAMI_VALUE 0x71 +#define INV_MPU9255_WHOAMI_VALUE 0x73 #define INV_ICM20608_WHOAMI_VALUE 0xAF /* scan element definition */ @@ -287,8 +302,7 @@ enum inv_mpu6050_clock_sel_e { irqreturn_t inv_mpu6050_irq_handler(int irq, void *p); irqreturn_t inv_mpu6050_read_fifo(int irq, void *p); -int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev); -void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st); +int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type); int inv_reset_fifo(struct iio_dev *indio_dev); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); @@ -297,6 +311,4 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client); void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type); -int inv_mpu_core_remove(struct device *dev); -int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); extern const struct dev_pm_ops inv_mpu_pmops; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index ff81c6aa009d..97d965181635 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -51,13 +51,14 @@ int inv_reset_fifo(struct iio_dev *indio_dev) if (result) goto reset_fifo_fail; /* disable fifo reading */ - result = regmap_write(st->map, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); if (result) goto reset_fifo_fail; /* reset FIFO*/ - result = regmap_write(st->map, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_RST); + d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST; + result = regmap_write(st->map, st->reg->user_ctrl, d); if (result) goto reset_fifo_fail; @@ -72,9 +73,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev) if (result) return result; } - /* enable FIFO reading and I2C master interface*/ - result = regmap_write(st->map, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_EN); + /* enable FIFO reading */ + d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN; + result = regmap_write(st->map, st->reg->user_ctrl, d); if (result) goto reset_fifo_fail; /* enable sensor output to FIFO */ @@ -127,8 +128,23 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; u16 fifo_count; s64 timestamp; + int int_status; mutex_lock(&st->lock); + + /* ack interrupt and check status */ + result = regmap_read(st->map, st->reg->int_status, &int_status); + if (result) { + dev_err(regmap_get_device(st->map), + "failed to ack interrupt\n"); + goto flush_fifo; + } + if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) { + dev_warn(regmap_get_device(st->map), + "spurious interrupt with status 0x%x\n", int_status); + goto end_session; + } + if (!(st->chip_config.accl_fifo_enable | st->chip_config.gyro_fifo_enable)) goto end_session; @@ -140,7 +156,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR; /* - * read fifo_count register to know how many bytes inside FIFO + * read fifo_count register to know how many bytes are inside the FIFO * right now */ result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, @@ -150,7 +166,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) fifo_count = be16_to_cpup((__be16 *)(&data[0])); if (fifo_count < bytes_per_datum) goto end_session; - /* fifo count can't be odd number, if it is odd, reset fifo*/ + /* fifo count can't be an odd number. If it is odd, reset the FIFO. */ if (fifo_count & 1) goto flush_fifo; if (fifo_count > INV_MPU6050_FIFO_THRESHOLD) @@ -170,10 +186,13 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) if (result == 0) timestamp = 0; - result = iio_push_to_buffers_with_timestamp(indio_dev, data, - timestamp); - if (result) - goto flush_fifo; + /* skip first samples if needed */ + if (st->skip_samples) + st->skip_samples--; + else + iio_push_to_buffers_with_timestamp(indio_dev, data, + timestamp); + fifo_count -= bytes_per_datum; } diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 74506e5ac0db..227f50afff22 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -31,8 +31,9 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) if (ret) return ret; - ret = regmap_write(st->map, INV_MPU6050_REG_USER_CTRL, - INV_MPU6050_BIT_I2C_IF_DIS); + st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS; + ret = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); if (ret) { inv_mpu6050_set_power_itg(st, false); return ret; @@ -69,11 +70,6 @@ static int inv_mpu_probe(struct spi_device *spi) inv_mpu_i2c_disable, chip_type); } -static int inv_mpu_remove(struct spi_device *spi) -{ - return inv_mpu_core_remove(&spi->dev); -} - /* * device id table is used to identify what device can be * supported by this driver @@ -83,6 +79,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu6500", INV_MPU6500}, {"mpu9150", INV_MPU9150}, {"mpu9250", INV_MPU9250}, + {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, {} }; @@ -97,7 +94,6 @@ MODULE_DEVICE_TABLE(acpi, inv_acpi_match); static struct spi_driver inv_mpu_driver = { .probe = inv_mpu_probe, - .remove = inv_mpu_remove, .id_table = inv_mpu_id, .driver = { .acpi_match_table = ACPI_PTR(inv_acpi_match), diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index f963f9fc98c0..6c3e1652a687 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -49,49 +49,66 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) if (result) return result; inv_scan_query(indio_dev); + st->skip_samples = 0; if (st->chip_config.gyro_fifo_enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) - return result; + goto error_power_off; + /* gyro first sample is out of specs, skip it */ + st->skip_samples = 1; } if (st->chip_config.accl_fifo_enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) - return result; + goto error_gyro_off; } result = inv_reset_fifo(indio_dev); if (result) - return result; + goto error_accl_off; } else { result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) - return result; + goto error_accl_off; result = regmap_write(st->map, st->reg->int_enable, 0); if (result) - return result; + goto error_accl_off; - result = regmap_write(st->map, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); if (result) - return result; + goto error_accl_off; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_GYRO_STBY); + INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) - return result; + goto error_accl_off; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_ACCL_STBY); + INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) - return result; + goto error_gyro_off; + result = inv_mpu6050_set_power_itg(st, false); if (result) - return result; + goto error_power_off; } return 0; + +error_accl_off: + if (st->chip_config.accl_fifo_enable) + inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); +error_gyro_off: + if (st->chip_config.gyro_fifo_enable) + inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); +error_power_off: + inv_mpu6050_set_power_itg(st, false); + return result; } /** @@ -117,7 +134,7 @@ static const struct iio_trigger_ops inv_mpu_trigger_ops = { .set_trigger_state = &inv_mpu_data_rdy_trigger_set_state, }; -int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) +int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type) { int ret; struct inv_mpu6050_state *st = iio_priv(indio_dev); @@ -131,7 +148,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) ret = devm_request_irq(&indio_dev->dev, st->irq, &iio_trigger_generic_data_rdy_poll, - IRQF_TRIGGER_RISING, + irq_type, "inv_mpu", st->trig); if (ret) @@ -141,7 +158,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) st->trig->ops = &inv_mpu_trigger_ops; iio_trigger_set_drvdata(st->trig, indio_dev); - ret = iio_trigger_register(st->trig); + ret = devm_iio_trigger_register(&indio_dev->dev, st->trig); if (ret) return ret; @@ -149,8 +166,3 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) return 0; } - -void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st) -{ - iio_trigger_unregister(st->trig); -} diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 14f2eb6e9fb7..ccc817e17eb8 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -8,7 +8,8 @@ config IIO_ST_LSM6DSX select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) help Say yes here to build support for STMicroelectronics LSM6DSx imu - sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm + sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, + ism330dlc To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index a3cc7cd97026..edcd838037cd 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -18,12 +18,14 @@ #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" #define ST_LSM6DSL_DEV_NAME "lsm6dsl" #define ST_LSM6DSM_DEV_NAME "lsm6dsm" +#define ST_ISM330DLC_DEV_NAME "ism330dlc" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, ST_LSM6DS3H_ID, ST_LSM6DSL_ID, ST_LSM6DSM_ID, + ST_ISM330DLC_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 1045e025e92b..4994f920a836 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -1,10 +1,10 @@ /* * STMicroelectronics st_lsm6dsx FIFO buffer library driver * - * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM: The FIFO buffer can be configured - * to store data from gyroscope and accelerometer. Samples are queued - * without any tag according to a specific pattern based on 'FIFO data sets' - * (6 bytes each): + * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: The FIFO buffer can be + * configured to store data from gyroscope and accelerometer. Samples are + * queued without any tag according to a specific pattern based on + * 'FIFO data sets' (6 bytes each): * - 1st data set is reserved for gyroscope data * - 2nd data set is reserved for accelerometer data * The FIFO pattern changes depending on the ODRs and decimation factors @@ -276,7 +276,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 *data, #define ST_LSM6DSX_IIO_BUFF_SIZE (ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \ sizeof(s64)) + sizeof(s64)) /** - * st_lsm6dsx_read_fifo() - LSM6DS3-LSM6DS3H-LSM6DSL-LSM6DSM read FIFO routine + * st_lsm6dsx_read_fifo() - hw FIFO read routine * @hw: Pointer to instance of struct st_lsm6dsx_hw. * * Read samples from the hw FIFO and push them to IIO buffers. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 8656d72ef4ee..aebbe0ddd8d8 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -17,7 +17,7 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 8KB * - * - LSM6DS3H/LSM6DSL/LSM6DSM: + * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 @@ -252,6 +252,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .id = { [0] = ST_LSM6DSL_ID, [1] = ST_LSM6DSM_ID, + [2] = ST_ISM330DLC_ID, }, .decimator = { [ST_LSM6DSX_ID_ACC] = { @@ -266,11 +267,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .fifo_ops = { .fifo_th = { .addr = 0x06, - .mask = GENMASK(11, 0), + .mask = GENMASK(10, 0), }, .fifo_diff = { .addr = 0x3a, - .mask = GENMASK(11, 0), + .mask = GENMASK(10, 0), }, .th_wl = 3, /* 1LSB = 2B */ }, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 41525dd2aab7..377c4e9997da 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -57,6 +57,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm6dsm", .data = (void *)ST_LSM6DSM_ID, }, + { + .compatible = "st,ism330dlc", + .data = (void *)ST_ISM330DLC_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -66,6 +70,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID }, { ST_LSM6DSL_DEV_NAME, ST_LSM6DSL_ID }, { ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID }, + { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 2c8135834479..fec5c6ce7eb7 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -57,6 +57,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm6dsm", .data = (void *)ST_LSM6DSM_ID, }, + { + .compatible = "st,ism330dlc", + .data = (void *)ST_ISM330DLC_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -66,6 +70,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID }, { ST_LSM6DSL_DEV_NAME, ST_LSM6DSL_ID }, { ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID }, + { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c index 8e8a0e7f78d1..fd1609e975ab 100644 --- a/drivers/iio/light/cros_ec_light_prox.c +++ b/drivers/iio/light/cros_ec_light_prox.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> #include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger.h> @@ -29,8 +30,6 @@ #include <linux/slab.h> #include <linux/sysfs.h> -#include "../common/cros_ec_sensors/cros_ec_sensors_core.h" - /* * We only represent one entry for light or proximity. EC is merging different * light sensors to return the what the eye would see. For proximity, we diff --git a/drivers/iio/potentiometer/mcp4018.c b/drivers/iio/potentiometer/mcp4018.c index 601b25d1f387..320a7c929777 100644 --- a/drivers/iio/potentiometer/mcp4018.c +++ b/drivers/iio/potentiometer/mcp4018.c @@ -99,6 +99,23 @@ static const struct iio_info mcp4018_info = { .write_raw = mcp4018_write_raw, }; +static const struct i2c_device_id mcp4018_id[] = { + { "mcp4017-502", MCP4018_502 }, + { "mcp4017-103", MCP4018_103 }, + { "mcp4017-503", MCP4018_503 }, + { "mcp4017-104", MCP4018_104 }, + { "mcp4018-502", MCP4018_502 }, + { "mcp4018-103", MCP4018_103 }, + { "mcp4018-503", MCP4018_503 }, + { "mcp4018-104", MCP4018_104 }, + { "mcp4019-502", MCP4018_502 }, + { "mcp4019-103", MCP4018_103 }, + { "mcp4019-503", MCP4018_503 }, + { "mcp4019-104", MCP4018_104 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mcp4018_id); + #ifdef CONFIG_OF #define MCP4018_COMPATIBLE(of_compatible, cfg) { \ @@ -125,8 +142,7 @@ MODULE_DEVICE_TABLE(of, mcp4018_of_match); #endif -static int mcp4018_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int mcp4018_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct mcp4018_data *data; @@ -150,7 +166,7 @@ static int mcp4018_probe(struct i2c_client *client, if (match) data->cfg = of_device_get_match_data(dev); else - data->cfg = &mcp4018_cfg[id->driver_data]; + data->cfg = &mcp4018_cfg[i2c_match_id(mcp4018_id, client)->driver_data]; indio_dev->dev.parent = dev; indio_dev->info = &mcp4018_info; @@ -161,29 +177,12 @@ static int mcp4018_probe(struct i2c_client *client, return devm_iio_device_register(dev, indio_dev); } -static const struct i2c_device_id mcp4018_id[] = { - { "mcp4017-502", MCP4018_502 }, - { "mcp4017-103", MCP4018_103 }, - { "mcp4017-503", MCP4018_503 }, - { "mcp4017-104", MCP4018_104 }, - { "mcp4018-502", MCP4018_502 }, - { "mcp4018-103", MCP4018_103 }, - { "mcp4018-503", MCP4018_503 }, - { "mcp4018-104", MCP4018_104 }, - { "mcp4019-502", MCP4018_502 }, - { "mcp4019-103", MCP4018_103 }, - { "mcp4019-503", MCP4018_503 }, - { "mcp4019-104", MCP4018_104 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, mcp4018_id); - static struct i2c_driver mcp4018_driver = { .driver = { .name = "mcp4018", .of_match_table = of_match_ptr(mcp4018_of_match), }, - .probe = mcp4018_probe, + .probe_new = mcp4018_probe, .id_table = mcp4018_id, }; diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c index 114ab876fcc6..df894af6cccb 100644 --- a/drivers/iio/potentiometer/mcp4531.c +++ b/drivers/iio/potentiometer/mcp4531.c @@ -209,6 +209,75 @@ static const struct iio_info mcp4531_info = { .write_raw = mcp4531_write_raw, }; +static const struct i2c_device_id mcp4531_id[] = { + { "mcp4531-502", MCP453x_502 }, + { "mcp4531-103", MCP453x_103 }, + { "mcp4531-503", MCP453x_503 }, + { "mcp4531-104", MCP453x_104 }, + { "mcp4532-502", MCP453x_502 }, + { "mcp4532-103", MCP453x_103 }, + { "mcp4532-503", MCP453x_503 }, + { "mcp4532-104", MCP453x_104 }, + { "mcp4541-502", MCP454x_502 }, + { "mcp4541-103", MCP454x_103 }, + { "mcp4541-503", MCP454x_503 }, + { "mcp4541-104", MCP454x_104 }, + { "mcp4542-502", MCP454x_502 }, + { "mcp4542-103", MCP454x_103 }, + { "mcp4542-503", MCP454x_503 }, + { "mcp4542-104", MCP454x_104 }, + { "mcp4551-502", MCP455x_502 }, + { "mcp4551-103", MCP455x_103 }, + { "mcp4551-503", MCP455x_503 }, + { "mcp4551-104", MCP455x_104 }, + { "mcp4552-502", MCP455x_502 }, + { "mcp4552-103", MCP455x_103 }, + { "mcp4552-503", MCP455x_503 }, + { "mcp4552-104", MCP455x_104 }, + { "mcp4561-502", MCP456x_502 }, + { "mcp4561-103", MCP456x_103 }, + { "mcp4561-503", MCP456x_503 }, + { "mcp4561-104", MCP456x_104 }, + { "mcp4562-502", MCP456x_502 }, + { "mcp4562-103", MCP456x_103 }, + { "mcp4562-503", MCP456x_503 }, + { "mcp4562-104", MCP456x_104 }, + { "mcp4631-502", MCP463x_502 }, + { "mcp4631-103", MCP463x_103 }, + { "mcp4631-503", MCP463x_503 }, + { "mcp4631-104", MCP463x_104 }, + { "mcp4632-502", MCP463x_502 }, + { "mcp4632-103", MCP463x_103 }, + { "mcp4632-503", MCP463x_503 }, + { "mcp4632-104", MCP463x_104 }, + { "mcp4641-502", MCP464x_502 }, + { "mcp4641-103", MCP464x_103 }, + { "mcp4641-503", MCP464x_503 }, + { "mcp4641-104", MCP464x_104 }, + { "mcp4642-502", MCP464x_502 }, + { "mcp4642-103", MCP464x_103 }, + { "mcp4642-503", MCP464x_503 }, + { "mcp4642-104", MCP464x_104 }, + { "mcp4651-502", MCP465x_502 }, + { "mcp4651-103", MCP465x_103 }, + { "mcp4651-503", MCP465x_503 }, + { "mcp4651-104", MCP465x_104 }, + { "mcp4652-502", MCP465x_502 }, + { "mcp4652-103", MCP465x_103 }, + { "mcp4652-503", MCP465x_503 }, + { "mcp4652-104", MCP465x_104 }, + { "mcp4661-502", MCP466x_502 }, + { "mcp4661-103", MCP466x_103 }, + { "mcp4661-503", MCP466x_503 }, + { "mcp4661-104", MCP466x_104 }, + { "mcp4662-502", MCP466x_502 }, + { "mcp4662-103", MCP466x_103 }, + { "mcp4662-503", MCP466x_503 }, + { "mcp4662-104", MCP466x_104 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mcp4531_id); + #ifdef CONFIG_OF #define MCP4531_COMPATIBLE(of_compatible, cfg) { \ @@ -286,8 +355,7 @@ static const struct of_device_id mcp4531_of_match[] = { MODULE_DEVICE_TABLE(of, mcp4531_of_match); #endif -static int mcp4531_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int mcp4531_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct mcp4531_data *data; @@ -311,7 +379,7 @@ static int mcp4531_probe(struct i2c_client *client, if (match) data->cfg = of_device_get_match_data(dev); else - data->cfg = &mcp4531_cfg[id->driver_data]; + data->cfg = &mcp4531_cfg[i2c_match_id(mcp4531_id, client)->driver_data]; indio_dev->dev.parent = dev; indio_dev->info = &mcp4531_info; @@ -322,81 +390,12 @@ static int mcp4531_probe(struct i2c_client *client, return devm_iio_device_register(dev, indio_dev); } -static const struct i2c_device_id mcp4531_id[] = { - { "mcp4531-502", MCP453x_502 }, - { "mcp4531-103", MCP453x_103 }, - { "mcp4531-503", MCP453x_503 }, - { "mcp4531-104", MCP453x_104 }, - { "mcp4532-502", MCP453x_502 }, - { "mcp4532-103", MCP453x_103 }, - { "mcp4532-503", MCP453x_503 }, - { "mcp4532-104", MCP453x_104 }, - { "mcp4541-502", MCP454x_502 }, - { "mcp4541-103", MCP454x_103 }, - { "mcp4541-503", MCP454x_503 }, - { "mcp4541-104", MCP454x_104 }, - { "mcp4542-502", MCP454x_502 }, - { "mcp4542-103", MCP454x_103 }, - { "mcp4542-503", MCP454x_503 }, - { "mcp4542-104", MCP454x_104 }, - { "mcp4551-502", MCP455x_502 }, - { "mcp4551-103", MCP455x_103 }, - { "mcp4551-503", MCP455x_503 }, - { "mcp4551-104", MCP455x_104 }, - { "mcp4552-502", MCP455x_502 }, - { "mcp4552-103", MCP455x_103 }, - { "mcp4552-503", MCP455x_503 }, - { "mcp4552-104", MCP455x_104 }, - { "mcp4561-502", MCP456x_502 }, - { "mcp4561-103", MCP456x_103 }, - { "mcp4561-503", MCP456x_503 }, - { "mcp4561-104", MCP456x_104 }, - { "mcp4562-502", MCP456x_502 }, - { "mcp4562-103", MCP456x_103 }, - { "mcp4562-503", MCP456x_503 }, - { "mcp4562-104", MCP456x_104 }, - { "mcp4631-502", MCP463x_502 }, - { "mcp4631-103", MCP463x_103 }, - { "mcp4631-503", MCP463x_503 }, - { "mcp4631-104", MCP463x_104 }, - { "mcp4632-502", MCP463x_502 }, - { "mcp4632-103", MCP463x_103 }, - { "mcp4632-503", MCP463x_503 }, - { "mcp4632-104", MCP463x_104 }, - { "mcp4641-502", MCP464x_502 }, - { "mcp4641-103", MCP464x_103 }, - { "mcp4641-503", MCP464x_503 }, - { "mcp4641-104", MCP464x_104 }, - { "mcp4642-502", MCP464x_502 }, - { "mcp4642-103", MCP464x_103 }, - { "mcp4642-503", MCP464x_503 }, - { "mcp4642-104", MCP464x_104 }, - { "mcp4651-502", MCP465x_502 }, - { "mcp4651-103", MCP465x_103 }, - { "mcp4651-503", MCP465x_503 }, - { "mcp4651-104", MCP465x_104 }, - { "mcp4652-502", MCP465x_502 }, - { "mcp4652-103", MCP465x_103 }, - { "mcp4652-503", MCP465x_503 }, - { "mcp4652-104", MCP465x_104 }, - { "mcp4661-502", MCP466x_502 }, - { "mcp4661-103", MCP466x_103 }, - { "mcp4661-503", MCP466x_503 }, - { "mcp4661-104", MCP466x_104 }, - { "mcp4662-502", MCP466x_502 }, - { "mcp4662-103", MCP466x_103 }, - { "mcp4662-503", MCP466x_503 }, - { "mcp4662-104", MCP466x_104 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, mcp4531_id); - static struct i2c_driver mcp4531_driver = { .driver = { .name = "mcp4531", .of_match_table = of_match_ptr(mcp4531_of_match), }, - .probe = mcp4531_probe, + .probe_new = mcp4531_probe, .id_table = mcp4531_id, }; diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c index 4599fde4dd25..87c07af9181f 100644 --- a/drivers/iio/pressure/cros_ec_baro.c +++ b/drivers/iio/pressure/cros_ec_baro.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> #include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger.h> @@ -28,8 +29,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include "../common/cros_ec_sensors/cros_ec_sensors_core.h" - /* * One channel for pressure, the other for timestamp. */ |