aboutsummaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
authorGreg Kroah-Hartman2015-05-13 11:51:14 -0700
committerGreg Kroah-Hartman2015-05-13 11:51:14 -0700
commitec94efcdadab69f41d257a1054260f8295ab77ef (patch)
tree6287158245d80fa79b6017787d0bd762bad89c96 /drivers/iio
parent892c89d5d7ffd1bb794fe54d86c0eef18d215fab (diff)
parentf0828ba96d02d4d4b197c531b34c662ee3c928df (diff)
Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes: The usual mixed bag of fixes for IIO in the 4.1 cycle. Second version of this pull request as a small fix to a fix turned up before Greg pulled it for a cc10001 patch near the top of the tree. One core fix * Set updated for a iio kfifo was incorrectly set to false during a failed update, resulting in atttempts to repeat the failed operation appearing to succeed. This time I've decided to list the driver fixes in alphabetical order rather than 'randomly'. * axp288_adc - a recent change added a check for valid info masks when reading channels from consumer drivers. * bmp280 - temperature compensation was failing to read the tfine value, hence causing a temperature of 0 to always be returned and incorrect presure measurements. * cc10001 - Fix channel number mapping when some channels are reserved for remote CPUs. Fix an issue with the use of the power-up/power-down register (basically wrong polarity). Fix an issue due to the missinterpretting the return value from regulator_get_voltage. Add a delay before the start bit as recommended for the hardware to avoid data corruption. * hid pressure - fix channel spec of modfiied, but no modifier (which makes no sense!) * hid proximity - fix channel spec of modified, but no modifier (which makes no sense!). Fix a memory leak in the probe function. * mcp320x - occasional incorrect readings on dma using spi busses due to cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. * mma9551 - buffer overrun fix (miss specified maximum length of buffers) * mma9553 - endian fix on status message. Add an enable element for activity channel. Input checking for activity period to avoid rather unpredictable results. * spmi-vadc - fix an overflow in the output value normalization seen on some boards. * st-snesors - oops due to use of a mutex that is not yet initialized during probe. * xilinx adc - Some wrong register addresses, a wrong address for vccaux channel, incorrect scale on VREFP and incorrect sign on VREFN.
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/mma9551_core.c21
-rw-r--r--drivers/iio/accel/mma9553.c18
-rw-r--r--drivers/iio/accel/st_accel_core.c1
-rw-r--r--drivers/iio/adc/axp288_adc.c12
-rw-r--r--drivers/iio/adc/cc10001_adc.c60
-rw-r--r--drivers/iio/adc/mcp320x.c6
-rw-r--r--drivers/iio/adc/qcom-spmi-vadc.c7
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c5
-rw-r--r--drivers/iio/adc/xilinx-xadc.h6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c2
-rw-r--r--drivers/iio/gyro/st_gyro_core.c1
-rw-r--r--drivers/iio/kfifo_buf.c3
-rw-r--r--drivers/iio/light/hid-sensor-prox.c12
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c1
-rw-r--r--drivers/iio/pressure/bmp280.c1
-rw-r--r--drivers/iio/pressure/hid-sensor-press.c2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c1
17 files changed, 93 insertions, 66 deletions
diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c
index 7f55a6d7cd03..c6d5a3a40b60 100644
--- a/drivers/iio/accel/mma9551_core.c
+++ b/drivers/iio/accel/mma9551_core.c
@@ -389,7 +389,12 @@ int mma9551_read_config_words(struct i2c_client *client, u8 app_id,
{
int ret, i;
int len_words = len / sizeof(u16);
- __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+ __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+ if (len_words > ARRAY_SIZE(be_buf)) {
+ dev_err(&client->dev, "Invalid buffer size %d\n", len);
+ return -EINVAL;
+ }
ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
reg, NULL, 0, (u8 *) be_buf, len);
@@ -424,7 +429,12 @@ int mma9551_read_status_words(struct i2c_client *client, u8 app_id,
{
int ret, i;
int len_words = len / sizeof(u16);
- __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+ __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+ if (len_words > ARRAY_SIZE(be_buf)) {
+ dev_err(&client->dev, "Invalid buffer size %d\n", len);
+ return -EINVAL;
+ }
ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
reg, NULL, 0, (u8 *) be_buf, len);
@@ -459,7 +469,12 @@ int mma9551_write_config_words(struct i2c_client *client, u8 app_id,
{
int i;
int len_words = len / sizeof(u16);
- __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+ __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2];
+
+ if (len_words > ARRAY_SIZE(be_buf)) {
+ dev_err(&client->dev, "Invalid buffer size %d\n", len);
+ return -EINVAL;
+ }
for (i = 0; i < len_words; i++)
be_buf[i] = cpu_to_be16(buf[i]);
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 2df1af7d43fc..365a109aaaef 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -54,6 +54,7 @@
#define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0)
#define MMA9553_REG_CONF_ACTTHD 0x0E
+#define MMA9553_MAX_ACTTHD GENMASK(15, 0)
/* Pedometer status registers (R-only) */
#define MMA9553_REG_STATUS 0x00
@@ -316,22 +317,19 @@ static int mma9553_set_config(struct mma9553_data *data, u16 reg,
static int mma9553_read_activity_stepcnt(struct mma9553_data *data,
u8 *activity, u16 *stepcnt)
{
- u32 status_stepcnt;
- u16 status;
+ u16 buf[2];
int ret;
ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER,
- MMA9553_REG_STATUS, sizeof(u32),
- (u16 *) &status_stepcnt);
+ MMA9553_REG_STATUS, sizeof(u32), buf);
if (ret < 0) {
dev_err(&data->client->dev,
"error reading status and stepcnt\n");
return ret;
}
- status = status_stepcnt & MMA9553_MASK_CONF_WORD;
- *activity = mma9553_get_bits(status, MMA9553_MASK_STATUS_ACTIVITY);
- *stepcnt = status_stepcnt >> 16;
+ *activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY);
+ *stepcnt = buf[1];
return 0;
}
@@ -872,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev,
case IIO_EV_INFO_PERIOD:
switch (chan->type) {
case IIO_ACTIVITY:
+ if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC(
+ MMA9553_MAX_ACTTHD))
+ return -EINVAL;
mutex_lock(&data->mutex);
ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD,
&data->conf.actthd,
@@ -971,7 +972,8 @@ static const struct iio_chan_spec_ext_info mma9553_ext_info[] = {
.modified = 1, \
.channel2 = _chan2, \
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) | \
+ BIT(IIO_CHAN_INFO_ENABLE), \
.event_spec = mma9553_activity_events, \
.num_event_specs = ARRAY_SIZE(mma9553_activity_events), \
.ext_info = mma9553_ext_info, \
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 58d1d13d552a..211b13271c61 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -546,6 +546,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &accel_info;
+ mutex_init(&adata->tb.buf_lock);
st_sensors_power_enable(indio_dev);
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 08bcfb061ca5..56008a86b78f 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = {
.channel = 0,
.address = AXP288_TS_ADC_H,
.datasheet_name = "TS_PIN",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.indexed = 1,
.type = IIO_TEMP,
.channel = 1,
.address = AXP288_PMIC_ADC_H,
.datasheet_name = "PMIC_TEMP",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.indexed = 1,
.type = IIO_TEMP,
.channel = 2,
.address = AXP288_GP_ADC_H,
.datasheet_name = "GPADC",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.indexed = 1,
.type = IIO_CURRENT,
.channel = 3,
.address = AXP20X_BATT_CHRG_I_H,
.datasheet_name = "BATT_CHG_I",
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.indexed = 1,
.type = IIO_CURRENT,
.channel = 4,
.address = AXP20X_BATT_DISCHRG_I_H,
.datasheet_name = "BATT_DISCHRG_I",
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.indexed = 1,
.type = IIO_VOLTAGE,
.channel = 5,
.address = AXP20X_BATT_V_H,
.datasheet_name = "BATT_V",
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
},
};
@@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
chan->address))
dev_err(&indio_dev->dev, "TS pin restore\n");
break;
- case IIO_CHAN_INFO_PROCESSED:
- ret = axp288_adc_read_channel(val, chan->address, info->regmap);
- break;
default:
ret = -EINVAL;
}
diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c
index 51e2a83c9404..115f6e99a7fa 100644
--- a/drivers/iio/adc/cc10001_adc.c
+++ b/drivers/iio/adc/cc10001_adc.c
@@ -35,8 +35,9 @@
#define CC10001_ADC_EOC_SET BIT(0)
#define CC10001_ADC_CHSEL_SAMPLED 0x0c
-#define CC10001_ADC_POWER_UP 0x10
-#define CC10001_ADC_POWER_UP_SET BIT(0)
+#define CC10001_ADC_POWER_DOWN 0x10
+#define CC10001_ADC_POWER_DOWN_SET BIT(0)
+
#define CC10001_ADC_DEBUG 0x14
#define CC10001_ADC_DATA_COUNT 0x20
@@ -62,7 +63,6 @@ struct cc10001_adc_device {
u16 *buf;
struct mutex lock;
- unsigned long channel_map;
unsigned int start_delay_ns;
unsigned int eoc_delay_ns;
};
@@ -79,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev,
return readl(adc_dev->reg_base + reg);
}
+static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev)
+{
+ cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0);
+ ndelay(adc_dev->start_delay_ns);
+}
+
+static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev)
+{
+ cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN,
+ CC10001_ADC_POWER_DOWN_SET);
+}
+
static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
unsigned int channel)
{
@@ -88,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV;
cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
+ udelay(1);
val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG);
val = val | CC10001_ADC_START_CONV;
cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
@@ -129,6 +142,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
struct iio_dev *indio_dev;
unsigned int delay_ns;
unsigned int channel;
+ unsigned int scan_idx;
bool sample_invalid;
u16 *data;
int i;
@@ -139,20 +153,17 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
mutex_lock(&adc_dev->lock);
- cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
- CC10001_ADC_POWER_UP_SET);
-
- /* Wait for 8 (6+2) clock cycles before activating START */
- ndelay(adc_dev->start_delay_ns);
+ cc10001_adc_power_up(adc_dev);
/* Calculate delay step for eoc and sampled data */
delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
i = 0;
sample_invalid = false;
- for_each_set_bit(channel, indio_dev->active_scan_mask,
+ for_each_set_bit(scan_idx, indio_dev->active_scan_mask,
indio_dev->masklength) {
+ channel = indio_dev->channels[scan_idx].channel;
cc10001_adc_start(adc_dev, channel);
data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns);
@@ -166,7 +177,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
}
done:
- cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+ cc10001_adc_power_down(adc_dev);
mutex_unlock(&adc_dev->lock);
@@ -185,11 +196,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
unsigned int delay_ns;
u16 val;
- cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
- CC10001_ADC_POWER_UP_SET);
-
- /* Wait for 8 (6+2) clock cycles before activating START */
- ndelay(adc_dev->start_delay_ns);
+ cc10001_adc_power_up(adc_dev);
/* Calculate delay step for eoc and sampled data */
delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
@@ -198,7 +205,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns);
- cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+ cc10001_adc_power_down(adc_dev);
return val;
}
@@ -224,7 +231,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_SCALE:
ret = regulator_get_voltage(adc_dev->reg);
- if (ret)
+ if (ret < 0)
return ret;
*val = ret / 1000;
@@ -255,22 +262,22 @@ static const struct iio_info cc10001_adc_info = {
.update_scan_mode = &cc10001_update_scan_mode,
};
-static int cc10001_adc_channel_init(struct iio_dev *indio_dev)
+static int cc10001_adc_channel_init(struct iio_dev *indio_dev,
+ unsigned long channel_map)
{
- struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
struct iio_chan_spec *chan_array, *timestamp;
unsigned int bit, idx = 0;
- indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map,
- CC10001_ADC_NUM_CHANNELS);
+ indio_dev->num_channels = bitmap_weight(&channel_map,
+ CC10001_ADC_NUM_CHANNELS) + 1;
- chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1,
+ chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels,
sizeof(struct iio_chan_spec),
GFP_KERNEL);
if (!chan_array)
return -ENOMEM;
- for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) {
+ for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) {
struct iio_chan_spec *chan = &chan_array[idx];
chan->type = IIO_VOLTAGE;
@@ -305,6 +312,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
unsigned long adc_clk_rate;
struct resource *res;
struct iio_dev *indio_dev;
+ unsigned long channel_map;
int ret;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
@@ -313,9 +321,9 @@ static int cc10001_adc_probe(struct platform_device *pdev)
adc_dev = iio_priv(indio_dev);
- adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
+ channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
if (!of_property_read_u32(node, "adc-reserved-channels", &ret))
- adc_dev->channel_map &= ~ret;
+ channel_map &= ~ret;
adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
if (IS_ERR(adc_dev->reg))
@@ -361,7 +369,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES;
/* Setup the ADC channels available on the device */
- ret = cc10001_adc_channel_init(indio_dev);
+ ret = cc10001_adc_channel_init(indio_dev, channel_map);
if (ret < 0)
goto err_disable_clk;
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index efbfd12a4bfd..8d9c9b9215dd 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -60,12 +60,12 @@ struct mcp320x {
struct spi_message msg;
struct spi_transfer transfer[2];
- u8 tx_buf;
- u8 rx_buf[2];
-
struct regulator *reg;
struct mutex lock;
const struct mcp320x_chip_info *chip_info;
+
+ u8 tx_buf ____cacheline_aligned;
+ u8 rx_buf[2];
};
static int mcp320x_channel_to_tx_data(int device_index,
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 3211729bcb0b..0c4618b4d515 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -18,6 +18,7 @@
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/math64.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
const struct vadc_channel_prop *prop, u16 adc_code)
{
const struct vadc_prescale_ratio *prescale;
- s32 voltage;
+ s64 voltage;
voltage = adc_code - vadc->graph[prop->calibration].gnd;
voltage *= vadc->graph[prop->calibration].dx;
- voltage = voltage / vadc->graph[prop->calibration].dy;
+ voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
if (prop->calibration == VADC_CALIB_ABSOLUTE)
voltage += vadc->graph[prop->calibration].dx;
@@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
voltage = voltage * prescale->den;
- return voltage / prescale->num;
+ return div64_s64(voltage, prescale->num);
}
static int vadc_decimation_from_dt(u32 value)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index a221f7329b79..ce93bd8e3f68 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
switch (chan->address) {
case XADC_REG_VCCINT:
case XADC_REG_VCCAUX:
+ case XADC_REG_VREFP:
case XADC_REG_VCCBRAM:
case XADC_REG_VCCPINT:
case XADC_REG_VCCPAUX:
@@ -996,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
.num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
.scan_index = (_scan_index), \
.scan_type = { \
- .sign = 'u', \
+ .sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \
.realbits = 12, \
.storagebits = 16, \
.shift = 4, \
@@ -1008,7 +1009,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
static const struct iio_chan_spec xadc_channels[] = {
XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
- XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true),
+ XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true),
XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
index c7487e8d7f80..54adc5087210 100644
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg,
#define XADC_REG_MAX_VCCPINT 0x28
#define XADC_REG_MAX_VCCPAUX 0x29
#define XADC_REG_MAX_VCCO_DDR 0x2a
-#define XADC_REG_MIN_VCCPINT 0x2b
-#define XADC_REG_MIN_VCCPAUX 0x2c
-#define XADC_REG_MIN_VCCO_DDR 0x2d
+#define XADC_REG_MIN_VCCPINT 0x2c
+#define XADC_REG_MIN_VCCPAUX 0x2d
+#define XADC_REG_MIN_VCCO_DDR 0x2e
#define XADC_REG_CONF0 0x40
#define XADC_REG_CONF1 0x41
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index edd13d2b4121..8dd0477e201c 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -304,8 +304,6 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
struct st_sensors_platform_data *of_pdata;
int err = 0;
- mutex_init(&sdata->tb.buf_lock);
-
/* If OF/DT pdata exists, it will take precedence of anything else */
of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata);
if (of_pdata)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 21395f26d227..ffe96642b6d0 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -400,6 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &gyro_info;
+ mutex_init(&gdata->tb.buf_lock);
st_sensors_power_enable(indio_dev);
diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 847ca561afe0..55c267bbfd2f 100644
--- a/drivers/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -38,7 +38,8 @@ static int iio_request_update_kfifo(struct iio_buffer *r)
kfifo_free(&buf->kf);
ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum,
buf->buffer.length);
- buf->update_needed = false;
+ if (ret >= 0)
+ buf->update_needed = false;
} else {
kfifo_reset_out(&buf->kf);
}
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index 91ecc46ffeaa..ef60bae738e3 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -43,8 +43,6 @@ struct prox_state {
static const struct iio_chan_spec prox_channels[] = {
{
.type = IIO_PROXIMITY,
- .modified = 1,
- .channel2 = IIO_NO_MOD,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
@@ -253,7 +251,6 @@ static int hid_prox_probe(struct platform_device *pdev)
struct iio_dev *indio_dev;
struct prox_state *prox_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
- struct iio_chan_spec *channels;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct prox_state));
@@ -272,20 +269,21 @@ static int hid_prox_probe(struct platform_device *pdev)
return ret;
}
- channels = kmemdup(prox_channels, sizeof(prox_channels), GFP_KERNEL);
- if (!channels) {
+ indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels),
+ GFP_KERNEL);
+ if (!indio_dev->channels) {
dev_err(&pdev->dev, "failed to duplicate channels\n");
return -ENOMEM;
}
- ret = prox_parse_report(pdev, hsdev, channels,
+ ret = prox_parse_report(pdev, hsdev,
+ (struct iio_chan_spec *)indio_dev->channels,
HID_USAGE_SENSOR_PROX, prox_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
goto error_free_dev_mem;
}
- indio_dev->channels = channels;
indio_dev->num_channels =
ARRAY_SIZE(prox_channels);
indio_dev->dev.parent = &pdev->dev;
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8ade473f99fe..2e56f812a644 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -369,6 +369,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
+ mutex_init(&mdata->tb.buf_lock);
st_sensors_power_enable(indio_dev);
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 7c623e2bd633..a2602d8dd6d5 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -172,6 +172,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data,
var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) *
((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
+ data->t_fine = var1 + var2;
return (data->t_fine * 5 + 128) >> 8;
}
diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c
index 7bb8d4c1f7df..3cf0bd67d24c 100644
--- a/drivers/iio/pressure/hid-sensor-press.c
+++ b/drivers/iio/pressure/hid-sensor-press.c
@@ -47,8 +47,6 @@ struct press_state {
static const struct iio_chan_spec press_channels[] = {
{
.type = IIO_PRESSURE,
- .modified = 1,
- .channel2 = IIO_NO_MOD,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 97baf40d424b..e881fa6291e9 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -417,6 +417,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;
+ mutex_init(&press_data->tb.buf_lock);
st_sensors_power_enable(indio_dev);