diff options
| author | Jonathan Cameron | 2022-10-02 15:41:33 +0100 |
|---|---|---|
| committer | Jonathan Cameron | 2022-10-29 12:24:40 +0100 |
| commit | 57572cacd36e6d4be7722d7770d23f4430219827 (patch) | |
| tree | 10ea3ef860c5e14d3c1793bbf767c37102033db0 /drivers/iio | |
| parent | 207777dc306a732cff76ab63bf19a7e0851410b3 (diff) | |
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
The regulator enables were after the check on the chip variant, which was
very unlikely to return a correct value when not powered.
Presumably all the device anyone is testing on have a regulator that
is already powered up when this code runs for reasons beyond the scope
of this driver. Move the read call down a few lines.
Fixes: 3cf7ded15e40 ("iio: accel: bma400: basic regulator support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Robertson <dan@dlrobertson.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221002144133.3771029-1-jic23@kernel.org
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/accel/bma400_core.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index ad8fce3e08cd..490c342ef72a 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -869,18 +869,6 @@ static int bma400_init(struct bma400_data *data) unsigned int val; int ret; - /* Try to read chip_id register. It must return 0x90. */ - ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val); - if (ret) { - dev_err(data->dev, "Failed to read chip id register\n"); - return ret; - } - - if (val != BMA400_ID_REG_VAL) { - dev_err(data->dev, "Chip ID mismatch\n"); - return -ENODEV; - } - data->regulators[BMA400_VDD_REGULATOR].supply = "vdd"; data->regulators[BMA400_VDDIO_REGULATOR].supply = "vddio"; ret = devm_regulator_bulk_get(data->dev, @@ -906,6 +894,18 @@ static int bma400_init(struct bma400_data *data) if (ret) return ret; + /* Try to read chip_id register. It must return 0x90. */ + ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val); + if (ret) { + dev_err(data->dev, "Failed to read chip id register\n"); + return ret; + } + + if (val != BMA400_ID_REG_VAL) { + dev_err(data->dev, "Chip ID mismatch\n"); + return -ENODEV; + } + ret = bma400_get_power_mode(data); if (ret) { dev_err(data->dev, "Failed to get the initial power-mode\n"); |