iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts

On some SoCs like MSM8956, MSM8976 and others, secure contexts are
also secured: these get programmed by the bootloader or TZ (as usual)
but their "interesting" registers are locked out by the hypervisor,
disallowing direct register writes from Linux and, in many cases,
completely disallowing the reprogramming of TTBR, TCR, MAIR and other
registers including, but not limited to, resetting contexts.
This is referred downstream as a "v2" IOMMU but this is effectively
a "v2 firmware configuration" instead.

Luckily, the described behavior of version 2 is effective only on
secure contexts and not on non-secure ones: add support for that,
finally getting a completely working IOMMU on at least MSM8956/76.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[Marijn: Rebased over next-20221111]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 17 insertions, 2 deletions

diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index 60e4959cc9fd..3f788912b639 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -59,6 +59,7 @@ struct qcom_iommu_ctx {
 	struct device		*dev;
 	void __iomem		*base;
 	bool			 secure_init;
+	bool			 secured_ctx;
 	u8			 asid;      /* asid and ctx bank # are 1:1 */
 	struct iommu_domain	*domain;
 };
@@ -273,6 +274,12 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain,
 			ctx->secure_init = true;
 		}
 
+		/* Secured QSMMU-500/QSMMU-v2 contexts cannot be programmed */
+		if (ctx->secured_ctx) {
+			ctx->domain = domain;
+			continue;
+		}
+
 		/* Disable context bank before programming */
 		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0);
 
@@ -667,10 +674,14 @@ static int qcom_iommu_ctx_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	if (of_device_is_compatible(dev->of_node, "qcom,msm-iommu-v2-sec"))
+		ctx->secured_ctx = true;
+
 	/* clear IRQs before registering fault handler, just in case the
 	 * boot-loader left us a surprise:
 	 */
-	iommu_writel(ctx, ARM_SMMU_CB_FSR, iommu_readl(ctx, ARM_SMMU_CB_FSR));
+	if (!ctx->secured_ctx)
+		iommu_writel(ctx, ARM_SMMU_CB_FSR, iommu_readl(ctx, ARM_SMMU_CB_FSR));
 
 	ret = devm_request_irq(dev, irq,
 			       qcom_iommu_fault,
@@ -710,6 +721,8 @@ static void qcom_iommu_ctx_remove(struct platform_device *pdev)
 static const struct of_device_id ctx_of_match[] = {
 	{ .compatible = "qcom,msm-iommu-v1-ns" },
 	{ .compatible = "qcom,msm-iommu-v1-sec" },
+	{ .compatible = "qcom,msm-iommu-v2-ns" },
+	{ .compatible = "qcom,msm-iommu-v2-sec" },
 	{ /* sentinel */ }
 };
 
@@ -727,7 +740,8 @@ static bool qcom_iommu_has_secure_context(struct qcom_iommu_dev *qcom_iommu)
 	struct device_node *child;
 
 	for_each_child_of_node(qcom_iommu->dev->of_node, child) {
-		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec")) {
+		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec") ||
+		    of_device_is_compatible(child, "qcom,msm-iommu-v2-sec")) {
 			of_node_put(child);
 			return true;
 		}
@@ -871,6 +885,7 @@ static const struct dev_pm_ops qcom_iommu_pm_ops = {
 
 static const struct of_device_id qcom_iommu_of_match[] = {
 	{ .compatible = "qcom,msm-iommu-v1" },
+	{ .compatible = "qcom,msm-iommu-v2" },
 	{ /* sentinel */ }
 };