iommu/vt-d: Report right snoop capability when using FL for IOVA

The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.

Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

3 files changed, 28 insertions, 1 deletions

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 956a02eb40b4..0ee5f1bd8af2 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -658,7 +658,14 @@ static int domain_update_iommu_snooping(struct intel_iommu *skip)
 	rcu_read_lock();
 	for_each_active_iommu(iommu, drhd) {
 		if (iommu != skip) {
-			if (!ecap_sc_support(iommu->ecap)) {
+			/*
+			 * If the hardware is operating in the scalable mode,
+			 * the snooping control is always supported since we
+			 * always set PASID-table-entry.PGSNP bit if the domain
+			 * is managed outside (UNMANAGED).
+			 */
+			if (!sm_supported(iommu) &&
+			    !ecap_sc_support(iommu->ecap)) {
 				ret = 0;
 				break;
 			}
@@ -2505,6 +2512,9 @@ static int domain_setup_first_level(struct intel_iommu *iommu,
 
 	flags |= (level == 5) ? PASID_FLAG_FL5LP : 0;
 
+	if (domain->domain.type == IOMMU_DOMAIN_UNMANAGED)
+		flags |= PASID_FLAG_PAGE_SNOOP;
+
 	return intel_pasid_setup_first_level(iommu, dev, (pgd_t *)pgd, pasid,
 					     domain->iommu_did[iommu->seq_id],
 					     flags);
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 4754830610a6..8f2a702ce429 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -426,6 +426,16 @@ static inline void pasid_set_page_snoop(struct pasid_entry *pe, bool value)
 }
 
 /*
+ * Setup the Page Snoop (PGSNP) field (Bit 88) of a scalable mode
+ * PASID entry.
+ */
+static inline void
+pasid_set_pgsnp(struct pasid_entry *pe)
+{
+	pasid_set_bits(&pe->val[1], 1ULL << 24, 1ULL << 24);
+}
+
+/*
  * Setup the First Level Page table Pointer field (Bit 140~191)
  * of a scalable mode PASID entry.
  */
@@ -596,6 +606,9 @@ int intel_pasid_setup_first_level(struct intel_iommu *iommu,
 		}
 	}
 
+	if (flags & PASID_FLAG_PAGE_SNOOP)
+		pasid_set_pgsnp(pte);
+
 	pasid_set_domain_id(pte, did);
 	pasid_set_address_width(pte, iommu->agaw);
 	pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
@@ -674,6 +687,9 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
 	pasid_set_fault_enable(pte);
 	pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
 
+	if (domain->domain.type == IOMMU_DOMAIN_UNMANAGED)
+		pasid_set_pgsnp(pte);
+
 	/*
 	 * Since it is a second level only translation setup, we should
 	 * set SRE bit as well (addresses are expected to be GPAs).
diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
index 079534fcf55d..5ff61c3d401f 100644
--- a/drivers/iommu/intel/pasid.h
+++ b/drivers/iommu/intel/pasid.h
@@ -48,6 +48,7 @@
  */
 #define PASID_FLAG_SUPERVISOR_MODE	BIT(0)
 #define PASID_FLAG_NESTED		BIT(1)
+#define PASID_FLAG_PAGE_SNOOP		BIT(2)
 
 /*
  * The PASID_FLAG_FL5LP flag Indicates using 5-level paging for first-