leds: triggers: gpio: Rewrite to use trigger-sources

By providing a GPIO line as "trigger-sources" in the FWNODE
(such as from the device tree) and combining with the
GPIO trigger, we can support a GPIO LED trigger in a natural
way from the hardware description instead of using the
custom sysfs and deprecated global GPIO numberspace.

Example:

gpio: gpio@0 {
    compatible "my-gpio";
    gpio-controller;
    #gpio-cells = <2>;
    interrupt-controller;
    #interrupt-cells = <2>;
    #trigger-source-cells = <2>;
};

leds {
    compatible = "gpio-leds";
    led-my-gpio {
        label = "device:blue:myled";
        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
        default-state = "off";
        linux,default-trigger = "gpio";
        trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>;
    };
};

Make this the norm, unmark the driver as broken.

Delete the sysfs handling of GPIOs.

Since GPIO descriptors inherently can describe inversion,
the inversion handling can just be deleted.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230926-gpio-led-trigger-dt-v2-3-e06e458b788e@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

2 files changed, 41 insertions, 101 deletions

diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 2a57328eca20..d11d80176fc0 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -83,13 +83,10 @@ config LEDS_TRIGGER_ACTIVITY
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
 	depends on GPIOLIB || COMPILE_TEST
-	depends on BROKEN
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
 	  when using gpios as switches and triggering the needed LEDs
-	  from there. One use case is n810's keypad LEDs that could
-	  be triggered by this trigger when user slides up to show
-	  keypad.
+	  from there. Triggers are defined as device properties.
 
 	  If unsure, say N.
 
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index 0120faa3dafa..9b7fe5dd5208 100644
--- a/drivers/leds/trigger/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -3,12 +3,13 @@
  * ledtrig-gio.c - LED Trigger Based on GPIO events
  *
  * Copyright 2009 Felipe Balbi <me@felipebalbi.com>
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
  */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
@@ -16,10 +17,8 @@
 
 struct gpio_trig_data {
 	struct led_classdev *led;
-
 	unsigned desired_brightness;	/* desired brightness when led is on */
-	unsigned inverted;		/* true when gpio is inverted */
-	unsigned gpio;			/* gpio that triggers the leds */
+	struct gpio_desc *gpiod;	/* gpio that triggers the led */
 };
 
 static irqreturn_t gpio_trig_irq(int irq, void *_led)
@@ -28,10 +27,7 @@ static irqreturn_t gpio_trig_irq(int irq, void *_led)
 	struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
 	int tmp;
 
-	tmp = gpio_get_value_cansleep(gpio_data->gpio);
-	if (gpio_data->inverted)
-		tmp = !tmp;
-
+	tmp = gpiod_get_value_cansleep(gpio_data->gpiod);
 	if (tmp) {
 		if (gpio_data->desired_brightness)
 			led_set_brightness_nosleep(gpio_data->led,
@@ -73,93 +69,8 @@ static ssize_t gpio_trig_brightness_store(struct device *dev,
 static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
 		gpio_trig_brightness_store);
 
-static ssize_t gpio_trig_inverted_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
-
-	return sprintf(buf, "%u\n", gpio_data->inverted);
-}
-
-static ssize_t gpio_trig_inverted_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct led_classdev *led = led_trigger_get_led(dev);
-	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
-	unsigned long inverted;
-	int ret;
-
-	ret = kstrtoul(buf, 10, &inverted);
-	if (ret < 0)
-		return ret;
-
-	if (inverted > 1)
-		return -EINVAL;
-
-	gpio_data->inverted = inverted;
-
-	/* After inverting, we need to update the LED. */
-	if (gpio_is_valid(gpio_data->gpio))
-		gpio_trig_irq(0, led);
-
-	return n;
-}
-static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
-		gpio_trig_inverted_store);
-
-static ssize_t gpio_trig_gpio_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
-
-	return sprintf(buf, "%u\n", gpio_data->gpio);
-}
-
-static ssize_t gpio_trig_gpio_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct led_classdev *led = led_trigger_get_led(dev);
-	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
-	unsigned gpio;
-	int ret;
-
-	ret = sscanf(buf, "%u", &gpio);
-	if (ret < 1) {
-		dev_err(dev, "couldn't read gpio number\n");
-		return -EINVAL;
-	}
-
-	if (gpio_data->gpio == gpio)
-		return n;
-
-	if (!gpio_is_valid(gpio)) {
-		if (gpio_is_valid(gpio_data->gpio))
-			free_irq(gpio_to_irq(gpio_data->gpio), led);
-		gpio_data->gpio = gpio;
-		return n;
-	}
-
-	ret = request_threaded_irq(gpio_to_irq(gpio), NULL, gpio_trig_irq,
-			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
-			| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
-	if (ret) {
-		dev_err(dev, "request_irq failed with error %d\n", ret);
-	} else {
-		if (gpio_is_valid(gpio_data->gpio))
-			free_irq(gpio_to_irq(gpio_data->gpio), led);
-		gpio_data->gpio = gpio;
-		/* After changing the GPIO, we need to update the LED. */
-		gpio_trig_irq(0, led);
-	}
-
-	return ret ? ret : n;
-}
-static DEVICE_ATTR(gpio, 0644, gpio_trig_gpio_show, gpio_trig_gpio_store);
-
 static struct attribute *gpio_trig_attrs[] = {
 	&dev_attr_desired_brightness.attr,
-	&dev_attr_inverted.attr,
-	&dev_attr_gpio.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(gpio_trig);
@@ -167,16 +78,48 @@ ATTRIBUTE_GROUPS(gpio_trig);
 static int gpio_trig_activate(struct led_classdev *led)
 {
 	struct gpio_trig_data *gpio_data;
+	struct device *dev = led->dev;
+	int ret;
 
 	gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
 	if (!gpio_data)
 		return -ENOMEM;
 
-	gpio_data->led = led;
-	gpio_data->gpio = -ENOENT;
+	/*
+	 * The generic property "trigger-sources" is followed,
+	 * and we hope that this is a GPIO.
+	 */
+	gpio_data->gpiod = fwnode_gpiod_get_index(dev->fwnode,
+						  "trigger-sources",
+						  0, GPIOD_IN,
+						  "led-trigger");
+	if (IS_ERR(gpio_data->gpiod)) {
+		ret = PTR_ERR(gpio_data->gpiod);
+		kfree(gpio_data);
+		return ret;
+	}
+	if (!gpio_data->gpiod) {
+		dev_err(dev, "no valid GPIO for the trigger\n");
+		kfree(gpio_data);
+		return -EINVAL;
+	}
 
+	gpio_data->led = led;
 	led_set_trigger_data(led, gpio_data);
 
+	ret = request_threaded_irq(gpiod_to_irq(gpio_data->gpiod), NULL, gpio_trig_irq,
+			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
+			| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
+	if (ret) {
+		dev_err(dev, "request_irq failed with error %d\n", ret);
+		gpiod_put(gpio_data->gpiod);
+		kfree(gpio_data);
+		return ret;
+	}
+
+	/* Finally update the LED to initial status */
+	gpio_trig_irq(0, led);
+
 	return 0;
 }
 
@@ -184,8 +127,8 @@ static void gpio_trig_deactivate(struct led_classdev *led)
 {
 	struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
 
-	if (gpio_is_valid(gpio_data->gpio))
-		free_irq(gpio_to_irq(gpio_data->gpio), led);
+	free_irq(gpiod_to_irq(gpio_data->gpiod), led);
+	gpiod_put(gpio_data->gpiod);
 	kfree(gpio_data);
 }