diff options
author | Patrick Boettcher | 2006-10-18 08:34:16 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab | 2006-12-10 08:51:03 -0200 |
commit | a75763ffff4175bd8c115c217a39fbf445612aae (patch) | |
tree | d3d77ecc41fd8ad1b9dcad81805a171da06f8496 /drivers/media/dvb | |
parent | 8364681766cc18b948cf9d7bd46d1b92f343743b (diff) |
V4L/DVB (4772): Add support for DiBcom DiB7000PC
This patch contains support for the DiB7000PC-driver.
Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb')
-rw-r--r-- | drivers/media/dvb/dvb-usb/Kconfig | 1 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700.h | 5 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_core.c | 40 | ||||
-rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_devices.c | 96 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/Kconfig | 8 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/dib7000p.c | 1019 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/dib7000p.h | 46 |
8 files changed, 1203 insertions, 13 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index a0aeaf4bbb37..dfd53d5e7926 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -69,6 +69,7 @@ config DVB_USB_DIBUSB_MC config DVB_USB_DIB0700 tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" depends on DVB_USB + select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index ac84347f9d4c..cda3adea24fb 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -24,18 +24,23 @@ extern int dvb_usb_dib0700_debug; #define REQUEST_I2C_WRITE 0x3 #define REQUEST_POLL_RC 0x4 #define REQUEST_JUMPRAM 0x8 +#define REQUEST_SET_CLOCK 0xB #define REQUEST_SET_GPIO 0xC #define REQUEST_ENABLE_VIDEO 0xF // 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog) // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) +#define REQUEST_GET_VERSION 0x15 struct dib0700_state { u8 channel_state; u16 mt2060_if1[2]; + + u8 is_dib7000pc; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); +extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw); extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); extern struct i2c_algorithm dib0700_i2c_algo; diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index dca6c6985661..6a4d150784a6 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -135,14 +135,46 @@ struct i2c_algorithm dib0700_i2c_algo = { int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, int *cold) { - u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C - *cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0), - buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3; + u8 b[16]; + s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0), + REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT); + + deb_info("FW GET_VERSION length: %d\n",ret); + + *cold = ret <= 0; deb_info("cold: %d\n", *cold); return 0; } +static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll, + u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv, + u16 pll_loopdiv, u16 free_div, u16 dsuScaler) +{ + u8 b[10]; + b[0] = REQUEST_SET_CLOCK; + b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4); + b[2] = (pll_prediv >> 8) & 0xff; // MSB + b[3] = pll_prediv & 0xff; // LSB + b[4] = (pll_loopdiv >> 8) & 0xff; // MSB + b[5] = pll_loopdiv & 0xff; // LSB + b[6] = (free_div >> 8) & 0xff; // MSB + b[7] = free_div & 0xff; // LSB + b[8] = (dsuScaler >> 8) & 0xff; // MSB + b[9] = dsuScaler & 0xff; // LSB + + return dib0700_ctrl_wr(d, b, 10); +} + +int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3) +{ + switch (clk_MHz) { + case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break; + default: return -EINVAL; + } + return 0; +} + static int dib0700_jumpram(struct usb_device *udev, u32 address) { int ret, actlen; @@ -197,7 +229,7 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw /* start the firmware */ if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) { info("firmware started successfully."); - msleep(100); + msleep(500); } } else ret = -EIO; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 305dd35a1021..c231a1e5204e 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -10,6 +10,7 @@ #include "dib3000mc.h" #include "dib7000m.h" +#include "dib7000p.h" #include "mt2060.h" static int force_lna_activation; @@ -96,7 +97,7 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) } /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ -static struct dibx000_agc_config stk7700p_dib7000m_agc_config = { +static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { BAND_UHF | BAND_VHF, // band_caps /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, @@ -141,7 +142,52 @@ static struct dibx000_agc_config stk7700p_dib7000m_agc_config = { }, }; -static struct dibx000_bandwidth_config stk7700p_dib7000m_mt2060_config = { +static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { + BAND_UHF | BAND_VHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup + + 712, // inv_gain + 41, // time_stabiliz + + 0, // alpha_level + 118, // thlock + + 0, // wbd_inv + 4095, // wbd_ref + 0, // wbd_sel + 0, // wbd_alpha + + 42598, // agc1_max + 16384, // agc1_min + 42598, // agc2_max + 0, // agc2_min + + 0, // agc1_pt1 + 137, // agc1_pt2 + 255, // agc1_pt3 + + 0, // agc1_slope1 + 255, // agc1_slope2 + + 0, // agc2_pt1 + 0, // agc2_pt2 + + 0, // agc2_slope1 + 41, // agc2_slope2 + + 15, // alpha_mant + 25, // alpha_exp + + 28, // beta_mant + 48, // beta_exp + + 0, // perform_agc_softsplit +}; + +static struct dibx000_bandwidth_config stk7700p_pll_config = { 60000, 30000, // internal, sampling 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo @@ -156,8 +202,19 @@ static struct dib7000m_config stk7700p_dib7000m_config = { .quartz_direct = 1, .agc_config_count = 1, - .agc = &stk7700p_dib7000m_agc_config, - .bw = &stk7700p_dib7000m_mt2060_config, + .agc = &stk7700p_7000m_mt2060_agc_config, + .bw = &stk7700p_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +static struct dib7000p_config stk7700p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc = &stk7700p_7000p_mt2060_agc_config, + .bw = &stk7700p_pll_config, .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, @@ -168,13 +225,28 @@ static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; /* unless there is no real power management in DVB - we leave the device on GPIO6 */ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); + dib0700_ctrl_clock(adap->dev, 72, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); + + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); st->mt2060_if1[0] = 1220; - return (adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config)) == NULL ? -ENODEV : 0; + + if (dib7000pc_detection(&adap->dev->i2c_adap)) { + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); + st->is_dib7000pc = 1; + } else + adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); + + return adap->fe == NULL ? -ENODEV : 0; } static struct mt2060_config stk7700p_mt2060_config = { @@ -184,8 +256,14 @@ static struct mt2060_config stk7700p_mt2060_config = { static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; - struct i2c_adapter *tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); - return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &stk7700p_mt2060_config, + struct i2c_adapter *tun_i2c; + + if (st->is_dib7000pc) + tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); + else + tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config, st->mt2060_if1[0]) == NULL ? -ENODEV : 0; } diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 093c7695883d..7279e587e14f 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -180,6 +180,14 @@ config DVB_DIB7000M A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. +config DVB_DIB7000P + tristate "DiBcom 7000PC" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + comment "DVB-C (cable) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 244e87417b0c..593152ecf7ee 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_DVB_L64781) += l64781.o obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o +obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o obj-$(CONFIG_DVB_MT312) += mt312.o obj-$(CONFIG_DVB_VES1820) += ves1820.o obj-$(CONFIG_DVB_VES1X93) += ves1x93.o diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c new file mode 100644 index 000000000000..0349a4b5da3f --- /dev/null +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -0,0 +1,1019 @@ +/* + * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC). + * + * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include <linux/kernel.h> +#include <linux/i2c.h> + +#include "dvb_frontend.h" + +#include "dib7000p.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0) + +struct dib7000p_state { + struct dvb_frontend demod; + struct dib7000p_config cfg; + + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + + struct dibx000_i2c_master i2c_master; + + u16 wbd_ref; + + u8 current_band; + fe_bandwidth_t current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + + u16 gpio_dir; + u16 gpio_val; +}; + +enum dib7000p_power_mode { + DIB7000P_POWER_ALL = 0, + DIB7000P_POWER_INTERFACE_ONLY, +}; + +static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg) +{ + u8 wb[2] = { reg >> 8, reg & 0xff }; + u8 rb[2]; + struct i2c_msg msg[2] = { + { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 }, + { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 }, + }; + + if (i2c_transfer(state->i2c_adap, msg, 2) != 2) + dprintk("i2c read error on %d\n",reg); + + return (rb[0] << 8) | rb[1]; +} + +static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val) +{ + u8 b[4] = { + (reg >> 8) & 0xff, reg & 0xff, + (val >> 8) & 0xff, val & 0xff, + }; + struct i2c_msg msg = { + .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4 + }; + return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; +} +static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode) +{ + int ret = 0; + u16 outreg, fifo_threshold, smo_mode; + + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1); + + dprintk("-I- Setting output mode for demod %p to %d\n", + &state->demod, mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + else + outreg = (1 << 11); + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: // disable + outreg = 0; + break; + default: + dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod); + break; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5) ; + + ret |= dib7000p_write_word(state, 235, smo_mode); + ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ + ret |= dib7000p_write_word(state, 1286, outreg); /* P_Div_active */ + + return ret; +} + +static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode) +{ + /* by default everything is powered off */ + u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003, + reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff); + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB7000P_POWER_ALL: + reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff; + break; + /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */ + case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */ + reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10)); + break; +/* TODO following stuff is just converted from the dib7000-driver - check when is used what */ + } + + dib7000p_write_word(state, 774, reg_774); + dib7000p_write_word(state, 775, reg_775); + dib7000p_write_word(state, 776, reg_776); + dib7000p_write_word(state, 899, reg_899); + dib7000p_write_word(state, 1280, reg_1280); + + return 0; +} + +static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no) +{ + u16 reg_908 = dib7000p_read_word(state, 908), + reg_909 = dib7000p_read_word(state, 909); + + switch (no) { + case DIBX000_SLOW_ADC_ON: + reg_909 |= (1 << 1) | (1 << 0); + dib7000p_write_word(state, 909, reg_909); + reg_909 &= ~(1 << 1); + break; + + case DIBX000_SLOW_ADC_OFF: + reg_909 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + reg_908 &= 0x0fff; + reg_909 &= 0x0003; + break; + + case DIBX000_ADC_OFF: // leave the VBG voltage on + reg_908 |= (1 << 14) | (1 << 13) | (1 << 12); + reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); + break; + + case DIBX000_VBG_ENABLE: + reg_908 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_908 |= (1 << 15); + break; + + default: + break; + } + +// dprintk("908: %x, 909: %x\n", reg_908, reg_909); + + dib7000p_write_word(state, 908, reg_908); + dib7000p_write_word(state, 909, reg_909); +} + +static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx) +{ + struct dib7000p_state *state = demod->demodulator_priv; + u32 timf; + + // store the current bandwidth for later use + state->current_bandwidth = BW_Idx; + + if (state->timf == 0) { + dprintk("-D- Using default timf\n"); + timf = state->cfg.bw->timf; + } else { + dprintk("-D- Using updated timf\n"); + timf = state->timf; + } + + timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80; + + dprintk("timf: %d\n",timf); + + dib7000p_write_word(state, 23, (timf >> 16) & 0xffff); + dib7000p_write_word(state, 24, (timf ) & 0xffff); + + return 0; +} + +static int dib7000p_sad_calib(struct dib7000p_state *state) +{ +/* internal */ +// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth + dib7000p_write_word(state, 73, (0 << 1) | (0 << 0)); + dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096 + + /* do the calibration */ + dib7000p_write_word(state, 73, (1 << 0)); + dib7000p_write_word(state, 73, (0 << 0)); + + msleep(1); + + return 0; +} + +static void dib7000p_reset_pll(struct dib7000p_state *state) +{ + struct dibx000_bandwidth_config *bw = &state->cfg.bw[0]; + + dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset); + dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) | + (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0)); + + dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff); + dib7000p_write_word(state, 19, (bw->internal*1000 ) & 0xffff); + dib7000p_write_word(state, 21, (bw->ifreq >> 16) & 0xffff); + dib7000p_write_word(state, 22, (bw->ifreq ) & 0xffff); + + dib7000p_write_word(state, 72, bw->sad_cfg); +} + +static int dib7000p_reset_gpio(struct dib7000p_state *st) +{ + /* reset the GPIOs */ + dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos); + + dib7000p_write_word(st, 1029, st->gpio_dir); + dib7000p_write_word(st, 1030, st->gpio_val); + + /* TODO 1031 is P_gpio_od */ + + dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos); + + dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div); + return 0; +} + +static int dib7000p_demod_reset(struct dib7000p_state *state) +{ + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + + dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE); + + /* restart all parts */ + dib7000p_write_word(state, 770, 0xffff); + dib7000p_write_word(state, 771, 0xffff); + dib7000p_write_word(state, 772, 0x001f); + dib7000p_write_word(state, 898, 0x0003); + /* except i2c, sdio, gpio - control interfaces */ + dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) ); + + dib7000p_write_word(state, 770, 0); + dib7000p_write_word(state, 771, 0); + dib7000p_write_word(state, 772, 0); + dib7000p_write_word(state, 898, 0); + dib7000p_write_word(state, 1280, 0); + + /* default */ + dib7000p_reset_pll(state); + + if (dib7000p_reset_gpio(state) != 0) + dprintk("-E- GPIO reset was not successful.\n"); + + if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0) + dprintk("-E- OUTPUT_MODE could not be resetted.\n"); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) ); + + dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); + + return 0; +} + +static void dib7000p_restart_agc(struct dib7000p_state *state) +{ + // P_restart_iqc & P_restart_agc + dib7000p_write_word(state, 770, 0x0c00); + dib7000p_write_word(state, 770, 0x0000); +} + +static void dib7000p_update_lna(struct dib7000p_state *state) +{ + int i; + u16 dyn_gain; + + // when there is no LNA to program return immediatly + if (state->cfg.update_lna == NULL) + return; + + for (i = 0; i < 5; i++) { + // read dyn_gain here (because it is demod-dependent and not tuner) + dyn_gain = dib7000p_read_word(state, 394); + + if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed + dib7000p_restart_agc(state); + msleep(5); + } else + break; + } +} + +static void dib7000p_pll_clk_cfg(struct dib7000p_state *state) +{ + u16 tmp = 0; + tmp = dib7000p_read_word(state, 903); + dib7000p_write_word(state, 903, (tmp | 0x1)); //pwr-up pll + tmp = dib7000p_read_word(state, 900); + dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); //use High freq clock +} + +static void dib7000p_update_timf_freq(struct dib7000p_state *state) +{ + u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428); + state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100); + dib7000p_write_word(state, 23, (u16) (timf >> 16)); + dib7000p_write_word(state, 24, (u16) (timf & 0xffff)); + dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf); +} + +static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq) +{ + u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208; + + /* nfft, guard, qam, alpha */ + dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha)); + dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */ + + /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */ + tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1); + if (ch->vit_hrch == 0 || ch->vit_select_hp == 1) + tmp |= (ch->vit_code_rate_hp << 1); + else + tmp |= (ch->vit_code_rate_lp << 1); + dib7000p_write_word(state, 208, tmp); + + /* P_dvsy_sync_wait */ + switch (ch->nfft) { + case 1: tmp = 256; break; + case 2: tmp = 128; break; + case 0: + default: tmp = 64; break; + } + tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin + tmp <<= 4; + + /* deactive the possibility of diversity reception if extended interleave */ + /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */ + if (ch->intlv_native || ch->nfft == 1) + tmp |= (1 << 2) | (2 << 0); + dib7000p_write_word(state, 207, tmp); + + dib7000p_write_word(state, 26, 0x6680); // timf(6xxx) + dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073 + dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3) + dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5) + + /* channel estimation fine configuration */ + switch (ch->nqam) { + case 2: + est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ + est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ + break; + case 1: + est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ + est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ + est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ + break; + default: + est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ + est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ + est[2] = 0x0333; /* P_adp_regul_ext 0.1 */ + est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ + break; + } + for (tmp = 0; tmp < 4; tmp++) + dib7000p_write_word(state, 187 + tmp, est[tmp]); + + // set power-up level: interf+analog+AGC + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + dib7000p_set_adc_state(state, DIBX000_ADC_ON); + dib7000p_pll_clk_cfg(state); + msleep(7); + + // AGC initialization + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 1); + + dib7000p_restart_agc(state); + + // wait AGC rough lock time + msleep(5); + + dib7000p_update_lna(state); + + // wait AGC accurate lock time + msleep(7); + if (state->cfg.agc_control) + state->cfg.agc_control(&state->demod, 0); +} + +static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch) +{ + struct dib7000p_state *state = demod->demodulator_priv; + struct dibx000_ofdm_channel auto_ch; + u32 value; + + INIT_OFDM_CHANNEL(&auto_ch); + auto_ch.RF_kHz = ch->RF_kHz; + auto_ch.Bw = ch->Bw; + auto_ch.nqam = 2; + auto_ch.guard = 0; + auto_ch.nfft = 1; + auto_ch.vit_alpha = 1; + auto_ch.vit_select_hp = 1; + auto_ch.vit_code_rate_hp = 2; + auto_ch.vit_code_rate_lp = 3; + auto_ch.vit_hrch = 0; + auto_ch.intlv_native = 1; + + dib7000p_set_channel(state, &auto_ch, 7); + + // always use the setting for 8MHz here lock_time for 7,6 MHz are longer + value = 30 * state->cfg.bw->internal; + dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time + dib7000p_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time + value = 100 * state->cfg.bw->internal; + dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time + dib7000p_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time + value = 500 * state->cfg.bw->internal; + dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time + dib7000p_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time + + value = dib7000p_read_word(state, 0); + dib7000p_write_word(state, 0, (1 << 9) | value); + dib7000p_read_word(state, 1284); + dib7000p_write_word(state, 0, (u16) value); + + return 0; +} + +static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod) +{ + struct dib7000p_state *state = demod->demodulator_priv; + u16 irq_pending = dib7000p_read_word(state, 1284); + + if (irq_pending & 0x1) // failed + return 1; + + if (irq_pending & 0x2) // succeeded + return 2; + + return 0; // still pending +} + +static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch) +{ + struct dib7000p_state *state = demod->demodulator_priv; + u16 tmp = 0; + + if (ch != NULL) + dib7000p_set_channel(state, ch, 0); + else + return -EINVAL; + + // restart demod + dib7000p_write_word(state, 770, 0x4000); + dib7000p_write_word(state, 770, 0x0000); + msleep(45); + + /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ + dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3)); + + // never achieved a lock with that bandwidth so far - wait for osc-freq to update + if (state->timf == 0) + msleep(200); + + /* offset loop parameters */ + + /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */ + tmp = (6 << 8) | 0x80; + switch (ch->nfft) { + case 0: tmp |= (7 << 12); break; + case 1: tmp |= (9 << 12); break; + case 2: tmp |= (8 << 12); break; + } + dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */ + + /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */ + tmp = (0 << 4); + switch (ch->nfft) { + case 0: tmp |= 0x6; break; + case 1: tmp |= 0x8; break; + case 2: tmp |= 0x7; break; + } + dib7000p_write_word(state, 32, tmp); + + /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */ + tmp = (0 << 4); + switch (ch->nfft) { + case 0: tmp |= 0x6; break; + case 1: tmp |= 0x8; break; + case 2: tmp |= 0x7; break; + } + dib7000p_write_word(state, 33, tmp); + + tmp = dib7000p_read_word(state,509); + if (!((tmp >> 6) & 0x1)) { + /* restart the fec */ + tmp = dib7000p_read_word(state,771); + dib7000p_write_word(state, 771, tmp | (1 << 1)); + dib7000p_write_word(state, 771, tmp); + msleep(10); + tmp = dib7000p_read_word(state,509); + } + + // we achieved a lock - it's time to update the osc freq + if ((tmp >> 6) & 0x1) + dib7000p_update_timf_freq(state); + + return 0; +} + +static int dib7000p_init(struct dvb_frontend *demod) +{ + struct dibx000_agc_config *agc; + struct dib7000p_state *state = demod->demodulator_priv; + int ret = 0; + + // Demodulator default configuration + agc = state->cfg.agc; + + dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); + dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); + + /* AGC */ + ret |= dib7000p_write_word(state, 75 , agc->setup ); + ret |= dib7000p_write_word(state, 76 , agc->inv_gain ); + ret |= dib7000p_write_word(state, 77 , agc->time_stabiliz ); + ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp); + ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp); + + /* AGC continued */ + dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + if (state->wbd_ref != 0) + ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref); + else + ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref); + + ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) ); + + ret |= dib7000p_write_word(state, 107, agc->agc1_max); + ret |= dib7000p_write_word(state, 108, agc->agc1_min); + ret |= dib7000p_write_word(state, 109, agc->agc2_max); + ret |= dib7000p_write_word(state, 110, agc->agc2_min); + ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 ); + ret |= dib7000p_write_word(state, 112, agc->agc1_pt3); + ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + + /* disable power smoothing */ + ret |= dib7000p_write_word(state, 145, 0); + ret |= dib7000p_write_word(state, 146, 0); + ret |= dib7000p_write_word(state, 147, 0); + ret |= dib7000p_write_word(state, 148, 0); + ret |= dib7000p_write_word(state, 149, 0); + ret |= dib7000p_write_word(state, 150, 0); + ret |= dib7000p_write_word(state, 151, 0); + ret |= dib7000p_write_word(state, 152, 0); + + // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26 + ret |= dib7000p_write_word(state, 26 ,0x6680); + + // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16 + ret |= dib7000p_write_word(state, 142,0x0410); + // P_fft_freq_dir=1, P_fft_nb_to_cut=0 + ret |= dib7000p_write_word(state, 154,1 << 13); + // P_pha3_thres, default 0x3000 + ret |= dib7000p_write_word(state, 168,0x0ccd); + // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010 + //ret |= dib7000p_write_word(state, 169,0x0010); + // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005 + ret |= dib7000p_write_word(state, 183,0x200f); + // P_adp_regul_cnt=573, default: 410 + ret |= dib7000p_write_word(state, 187,0x023d); + // P_adp_noise_cnt= + ret |= dib7000p_write_word(state, 188,0x00a4); + // P_adp_regul_ext + ret |= dib7000p_write_word(state, 189,0x00a4); + // P_adp_noise_ext + ret |= dib7000p_write_word(state, 190,0x7ff0); + // P_adp_fil + ret |= dib7000p_write_word(state, 191,0x3ccc); + + ret |= dib7000p_write_word(state, 222,0x0010); + // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard + ret |= dib7000p_write_word(state, 235,0x0062); + + // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ... + if(state->cfg.tuner_is_baseband) + ret |= dib7000p_write_word(state, 36,0x0755); + else + ret |= dib7000p_write_word(state, 36,0x1f55); + + // auto search configuration + ret |= dib7000p_write_word(state, 2 ,0x0004); + ret |= dib7000p_write_word(state, 3 ,0x1000); + + /* Equal Lock */ + ret |= dib7000p_write_word(state, 4 ,0x0814); + + ret |= dib7000p_write_word(state, 6 ,0x001b); + ret |= dib7000p_write_word(state, 7 ,0x7740); + ret |= dib7000p_write_word(state, 8 ,0x005b); + ret |= dib7000p_write_word(state, 9 ,0x8d80); + ret |= dib7000p_write_word(state, 10 ,0x01c9); + ret |= dib7000p_write_word(state, 11 ,0xc380); + ret |= dib7000p_write_word(state, 12 ,0x0000); + ret |= dib7000p_write_word(state, 13 ,0x0080); + ret |= dib7000p_write_word(state, 14 ,0x0000); + ret |= dib7000p_write_word(state, 15 ,0x0090); + ret |= dib7000p_write_word(state, 16 ,0x0001); + ret |= dib7000p_write_word(state, 17 ,0xd4c0); + + // P_clk_cfg1 + ret |= dib7000p_write_word(state, 901, 0x0006); + + // P_divclksel=3 P_divbitsel=1 + ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6)); + + // Tuner IO bank: max drive (14mA) + divout pads max drive + ret |= dib7000p_write_word(state, 905, 0x2c8e); + + ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ); + dib7000p_sad_calib(state); + + return ret; +} + +static int dib7000p_sleep(struct dvb_frontend *demod) +{ + struct dib7000p_state *state = demod->demodulator_priv; + return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); +} + +static int dib7000p_identify(struct dib7000p_state *st) +{ + u16 value; + dprintk("-I- DiB7000PC: checking demod on I2C address: %d (%x)\n", + st->i2c_addr, st->i2c_addr); + + if ((value = dib7000p_read_word(st, 768)) != 0x01b3) { + dprintk("-E- DiB7000PC: wrong Vendor ID (read=0x%x)\n",value); + return -EREMOTEIO; + } + + if ((value = dib7000p_read_word(st, 769)) != 0x4000) { + dprintk("-E- DiB7000PC: wrong Device ID (%x)\n",value); + return -EREMOTEIO; + } + + return 0; +} + + +static int dib7000p_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 tps = dib7000p_read_word(state,463); + + fep->inversion = INVERSION_AUTO; + + fep->u.ofdm.bandwidth = state->current_bandwidth; + + switch ((tps >> 8) & 0x3) { + case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break; + case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break; + /* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */ + } + + switch (tps & 0x3) { + case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break; + case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break; + case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break; + case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break; + } + + switch ((tps >> 14) & 0x3) { + case 0: fep->u.ofdm.constellation = QPSK; break; + case 1: fep->u.ofdm.constellation = QAM_16; break; + case 2: + default: fep->u.ofdm.constellation = QAM_64; break; + } + + /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ + /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */ + + fep->u.ofdm.hierarchy_information = HIERARCHY_NONE; + switch ((tps >> 5) & 0x7) { + case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break; + case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break; + case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break; + case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break; + case 7: + default: fep->u.ofdm.code_rate_HP = FEC_7_8; break; + + } + + switch ((tps >> 2) & 0x7) { + case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break; + case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break; + case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break; + case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break; + case 7: + default: fep->u.ofdm.code_rate_LP = FEC_7_8; break; + } + + /* native interleaver: (dib7000p_read_word(state, 464) >> 5) & 0x1 */ + + return 0; +} + +static int dib7000p_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct dib7000p_state *state = fe->demodulator_priv; + struct dibx000_ofdm_channel ch; + + INIT_OFDM_CHANNEL(&ch); + FEP2DIB(fep,&ch); + + state->current_bandwidth = fep->u.ofdm.bandwidth; + dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth); + + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, fep); + + if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO || + fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO || + fep->u.ofdm.constellation == QAM_AUTO || + fep->u.ofdm.code_rate_HP == FEC_AUTO) { + int i = 800, found; + + dib7000p_autosearch_start(fe, &ch); + do { + msleep(1); + found = dib7000p_autosearch_is_irq(fe); + } while (found == 0 && i--); + + dprintk("autosearch returns: %d\n",found); + if (found == 0 || found == 1) + return 0; // no channel found + + dib7000p_get_frontend(fe, fep); + FEP2DIB(fep, &ch); + } + + /* make this a config parameter */ + dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO); + + return dib7000p_tune(fe, &ch); +} + +static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 lock = dib7000p_read_word(state, 509); + + *stat = 0; + + if (lock & 0x8000) + *stat |= FE_HAS_SIGNAL; + if (lock & 0x3000) + *stat |= FE_HAS_CARRIER; + if (lock & 0x0100) + *stat |= FE_HAS_VITERBI; + if (lock & 0x0010) + *stat |= FE_HAS_SYNC; + if (lock & 0x0008) + *stat |= FE_HAS_LOCK; + + return 0; +} + +static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct dib7000p_state *state = fe->demodulator_priv; + *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501); + return 0; +} + +static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct dib7000p_state *state = fe->demodulator_priv; + *unc = dib7000p_read_word(state, 506); + return 0; +} + +static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct dib7000p_state *state = fe->demodulator_priv; + u16 val = dib7000p_read_word(state, 394); + *strength = 65535 - val; + return 0; +} + +static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + *snr = 0x0000; + return 0; +} + +static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + +static void dib7000p_release(struct dvb_frontend *demod) +{ + struct dib7000p_state *st = demod->demodulator_priv; + dibx000_exit_i2c_master(&st->i2c_master); + kfree(st); +} + +int dib7000pc_detection(struct i2c_adapter *i2c_adap) +{ + u8 tx[2], rx[2]; + struct i2c_msg msg[2] = { + { .addr = 18 >> 1, .flags = 0, .buf = tx, .len = 2 }, + { .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 }, + }; + + tx[0] = 0x03; + tx[1] = 0x00; + + if (i2c_transfer(i2c_adap, msg, 2) == 2) + if (rx[0] == 0x01 && rx[1] == 0xb3) { + dprintk("-D- DiB7000PC detected\n"); + return 1; + } + + msg[0].addr = msg[1].addr = 0x40; + + if (i2c_transfer(i2c_adap, msg, 2) == 2) + if (rx[0] == 0x01 && rx[1] == 0xb3) { + dprintk("-D- DiB7000PC detected\n"); + return 1; + } + + dprintk("-D- DiB7000PC not detected\n"); + return 0; +} +EXPORT_SYMBOL(dib7000pc_detection); + +struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating) +{ + struct dib7000p_state *st = demod->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} +EXPORT_SYMBOL(dib7000p_get_i2c_master); + +int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]) +{ + struct dib7000p_state st = { .i2c_adap = i2c }; + int k = 0; + u8 new_addr = 0; + + for (k = no_of_demods-1; k >= 0; k--) { + st.cfg = cfg[k]; + + /* designated i2c address */ + new_addr = (0x40 + k) << 1; + st.i2c_addr = new_addr; + if (dib7000p_identify(&st) != 0) { + st.i2c_addr = default_addr; + if (dib7000p_identify(&st) != 0) { + dprintk("DiB7000P #%d: not identified\n", k); + return -EIO; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib7000p_set_output_mode(&st, OUTMODE_DIVERSITY); + + /* set new i2c address and force divstart */ + dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2); + + dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + st.cfg = cfg[k]; + st.i2c_addr = (0x40 + k) << 1; + + // unforce divstr + dib7000p_write_word(&st, 1285, st.i2c_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib7000p_set_output_mode(&st, OUTMODE_HIGH_Z); + } + + return 0; +} +EXPORT_SYMBOL(dib7000p_i2c_enumeration); + +static struct dvb_frontend_ops dib7000p_ops; +struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg) +{ + struct dvb_frontend *demod; + struct dib7000p_state *st; + st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); + if (st == NULL) + return NULL; + + memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config)); + st->i2c_adap = i2c_adap; + st->i2c_addr = i2c_addr; + st->gpio_val = cfg->gpio_val; + st->gpio_dir = cfg->gpio_dir; + + demod = &st->demod; + demod->demodulator_priv = st; + memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops)); + + if (dib7000p_identify(st) != 0) + goto error; + + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); + + dib7000p_demod_reset(st); + + return demod; + +error: + kfree(st); + return NULL; +} +EXPORT_SYMBOL(dib7000p_attach); + +static struct dvb_frontend_ops dib7000p_ops = { + .info = { + .name = "DiBcom 7000PC", + .type = FE_OFDM, + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib7000p_release, + + .init = dib7000p_init, + .sleep = dib7000p_sleep, + + .set_frontend = dib7000p_set_frontend, + .get_tune_settings = dib7000p_fe_get_tune_settings, + .get_frontend = dib7000p_get_frontend, + + .read_status = dib7000p_read_status, + .read_ber = dib7000p_read_ber, + .read_signal_strength = dib7000p_read_signal_strength, + .read_snr = dib7000p_read_snr, + .read_ucblocks = dib7000p_read_unc_blocks, +}; + +MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); +MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h new file mode 100644 index 000000000000..79465cf1aced --- /dev/null +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -0,0 +1,46 @@ +#ifndef DIB7000P_H +#define DIB7000P_H + +#include "dibx000_common.h" + +struct dib7000p_config { + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + u8 tuner_is_baseband; + int (*update_lna) (struct dvb_frontend *, u16 agc_global); + + struct dibx000_agc_config *agc; + struct dibx000_bandwidth_config *bw; + +#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB7000P_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB7000P_GPIO_PWM_POS0(v) ((v & 0xf) << 12) +#define DIB7000P_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) +#define DIB7000P_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) +#define DIB7000P_GPIO_PWM_POS3(v) (v & 0xf) +#define DIB7000P_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + + u16 pwm_freq_div; + + u8 quartz_direct; + + int (*agc_control) (struct dvb_frontend *, u8 before); +}; + +#define DEFAULT_DIB7000P_I2C_ADDRESS 18 + +extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); +extern int dib7000pc_detection(struct i2c_adapter *i2c_adap); + +/* TODO +extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val); +extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod); +extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff); +extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod); +*/ + +#endif |