media: rc: harmonize infrared durations to microseconds

rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.

Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.

Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.

This affects:
 - rx_resolution member of struct rc_dev
 - timeout member of struct rc_dev
 - duration member in struct ir_raw_event

Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c
index 5c7a7500a925..e0242c9b6aeb 100644
--- a/drivers/media/rc/ir_toy.c
+++ b/drivers/media/rc/ir_toy.c
@@ -38,8 +38,8 @@ static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 };
 #define LEN_SAMPLEMODEPROTO 3
 
 #define MIN_FW_VERSION 20
-#define UNIT_NS 21333
-#define MAX_TIMEOUT_NS (UNIT_NS * U16_MAX)
+#define UNIT_US 21
+#define MAX_TIMEOUT_US (UNIT_US * U16_MAX)
 
 #define MAX_PACKET 64
 
@@ -131,7 +131,7 @@ static void irtoy_response(struct irtoy *irtoy, u32 len)
 			if (v == 0xffff) {
 				rawir.pulse = false;
 			} else {
-				rawir.duration = v * UNIT_NS;
+				rawir.duration = v * UNIT_US;
 				ir_raw_event_store_with_timeout(irtoy->rc,
 								&rawir);
 			}
@@ -302,7 +302,7 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count)
 		return -ENOMEM;
 
 	for (i = 0; i < count; i++) {
-		u16 v = DIV_ROUND_CLOSEST(US_TO_NS(txbuf[i]), UNIT_NS);
+		u16 v = DIV_ROUND_CLOSEST(txbuf[i], UNIT_US);
 
 		if (!v)
 			v = 1;
@@ -438,7 +438,7 @@ static int irtoy_probe(struct usb_interface *intf,
 	rc->tx_ir = irtoy_tx;
 	rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
 	rc->map_name = RC_MAP_RC6_MCE;
-	rc->rx_resolution = UNIT_NS;
+	rc->rx_resolution = UNIT_US;
 	rc->timeout = IR_DEFAULT_TIMEOUT;
 
 	/*
@@ -450,8 +450,8 @@ static int irtoy_probe(struct usb_interface *intf,
 	 *
 	 * So, make timeout a largish minimum which works with most protocols.
 	 */
-	rc->min_timeout = MS_TO_NS(40);
-	rc->max_timeout = MAX_TIMEOUT_NS;
+	rc->min_timeout = MS_TO_US(40);
+	rc->max_timeout = MAX_TIMEOUT_US;
 
 	err = rc_register_device(rc);
 	if (err)