Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

1 files changed, 39 insertions, 0 deletions

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index aaa5c97a7216..5dfd826d734e 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -881,6 +881,20 @@ static struct tda1004x_config asus_tiger_3in1_config = {
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
+static struct tda1004x_config asus_ps3_100_config = {
+	.demod_address = 0x0b,
+	.invert        = 1,
+	.invert_oclk   = 0,
+	.xtal_freq     = TDA10046_XTAL_16M,
+	.agc_config    = TDA10046_AGC_TDA827X,
+	.gpio_config   = TDA10046_GP11_I,
+	.if_freq       = TDA10046_FREQ_045,
+	.i2c_gate      = 0x4b,
+	.tuner_address = 0x61,
+	.antenna_switch = 1,
+	.request_firmware = philips_tda1004x_request_firmware
+};
+
 /* ------------------------------------------------------------------
  * special case: this card uses saa713x GPIO22 for the mode switch
  */
@@ -1647,6 +1661,31 @@ static int dvb_init(struct saa7134_dev *dev)
 						&dev->i2c_adap, 0, 0) == NULL) {
 					wprintk("%s: Asus Tiger 3in1, no lnbp21"
 						" found!\n", __func__);
+				       goto dettach_frontend;
+			       }
+		       }
+	       }
+	       break;
+	case SAA7134_BOARD_ASUSTeK_PS3_100:
+		if (!use_frontend) {     /* terrestrial */
+			if (configure_tda827x_fe(dev, &asus_ps3_100_config,
+						 &tda827x_cfg_2) < 0)
+				goto dettach_frontend;
+	       } else {                /* satellite */
+			fe0->dvb.frontend = dvb_attach(tda10086_attach,
+						       &flydvbs, &dev->i2c_adap);
+			if (fe0->dvb.frontend) {
+				if (dvb_attach(tda826x_attach,
+					       fe0->dvb.frontend, 0x60,
+					       &dev->i2c_adap, 0) == NULL) {
+					wprintk("%s: Asus My Cinema PS3-100, no "
+						"tda826x found!\n", __func__);
+					goto dettach_frontend;
+				}
+				if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+					       &dev->i2c_adap, 0, 0) == NULL) {
+					wprintk("%s: Asus My Cinema PS3-100, no lnbp21"
+						" found!\n", __func__);
 					goto dettach_frontend;
 				}
 			}