diff options
author | Bjorn Helgaas | 2020-08-05 18:24:18 -0500 |
---|---|---|
committer | Bjorn Helgaas | 2020-08-05 18:24:18 -0500 |
commit | 13a77336f4f5681068bbaa4eac3ba8adff684a54 (patch) | |
tree | 22ed45537c1789610c8acf77dfd9ccb4f3d4c070 /drivers/misc | |
parent | 5b17dbab263035aa1dc8e61637bc719f47c60daa (diff) | |
parent | 0dbe77c9d2f8e6ef1792db99e150dd0025a977eb (diff) |
Merge branch 'remotes/lorenzo/pci/cadence'
- Convert cadence to use standard "dma-ranges" DT property instead of its
own "cdns,no-bar-match-nbits" (Kishon Vijay Abraham I)
- Fix pm_runtime_put_sync() issues in cadence error paths (Kishon Vijay
Abraham I)
- Add PTR_ALIGN_DOWN macro (Kishon Vijay Abraham I)
- Convert cadence r/w accessors to only 32-bit accesses (Kishon Vijay
Abraham I)
- Add cadence support to start Link and check Link status (Kishon Vijay
Abraham I)
- Allow custom PCI ops for cadence-based drivers (Kishon Vijay Abraham I)
- Remove "mem" from cadence reg binding since it's not memory and it
overlaps the PCIe config and memory region (Kishon Vijay Abraham I)
- Add cadence ->cpu_addr_fixup() for platforms that require absolute
addresses in the ATU, not just offsets (Kishon Vijay Abraham I)
- Update cadence Vendor IDs using local management registers, not
architected config space (Kishon Vijay Abraham I)
- Add cadence endpoint driver MSI-X support (Kishon Vijay Abraham I)
- Add bindings and driver for TI J721E SoC, supporting both host and
endpoint mode (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/cadence:
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
PCI: cadence: Add MSI-X support to Endpoint driver
PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
PCI: cadence: Add new *ops* for CPU addr fixup
dt-bindings: PCI: cadence: Remove "mem" from reg binding
PCI: cadence: Allow pci_host_bridge to have custom pci_ops
PCI: cadence: Add support to start link and verify link status
PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses
linux/kernel.h: Add PTR_ALIGN_DOWN macro
PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/pci_endpoint_test.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 41c40971979e..e060796f9caa 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -68,6 +68,7 @@ #define PCI_ENDPOINT_TEST_FLAGS 0x2c #define FLAG_USE_DMA BIT(0) +#define PCI_DEVICE_ID_TI_J721E 0xb00d #define PCI_DEVICE_ID_TI_AM654 0xb00c #define is_am654_pci_dev(pdev) \ @@ -932,6 +933,11 @@ static const struct pci_endpoint_test_data am654_data = { .irq_type = IRQ_TYPE_MSI, }; +static const struct pci_endpoint_test_data j721e_data = { + .alignment = 256, + .irq_type = IRQ_TYPE_MSI, +}; + static const struct pci_device_id pci_endpoint_test_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x), .driver_data = (kernel_ulong_t)&default_data, @@ -946,6 +952,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = { }, { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774C0), }, + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E), + .driver_data = (kernel_ulong_t)&j721e_data, + }, { } }; MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl); |