diff options
author | liwei | 2017-08-11 16:06:24 +0800 |
---|---|---|
committer | Ulf Hansson | 2017-08-30 14:01:56 +0200 |
commit | 361c7fe9b02eee7e1dd950ba70d701d03d292500 (patch) | |
tree | bbf8be50e405801388d54d0d840b1cdcdbcb2c6c /drivers/mmc/host/dw_mmc-k3.c | |
parent | 941e372d89c253fda457fd6267a2c05dd7598df0 (diff) |
mmc: dw_mmc-k3: add sd support for hi3660
Add sd card support for hi3660 soc
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Chen Jun <chenjun14@huawei.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/dw_mmc-k3.c')
-rw-r--r-- | drivers/mmc/host/dw_mmc-k3.c | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c index e38fb0020bb1..64cda84b2302 100644 --- a/drivers/mmc/host/dw_mmc-k3.c +++ b/drivers/mmc/host/dw_mmc-k3.c @@ -8,6 +8,8 @@ * (at your option) any later version. */ +#include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/mfd/syscon.h> #include <linux/mmc/host.h> @@ -28,7 +30,35 @@ #define AO_SCTRL_SEL18 BIT(10) #define AO_SCTRL_CTRL3 0x40C +#define DWMMC_SDIO_ID 2 + +#define SOC_SCTRL_SCPERCTRL5 (0x314) +#define SDCARD_IO_SEL18 BIT(2) + +#define SDCARD_RD_THRESHOLD (512) + +#define GENCLK_DIV (7) + +#define GPIO_CLK_ENABLE BIT(16) +#define GPIO_CLK_DIV_MASK GENMASK(11, 8) +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13) +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16) +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21) +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26) + +#define TIMING_MODE 3 +#define TIMING_CFG_NUM 10 + +#define NUM_PHASES (40) + +#define ENABLE_SHIFT_MIN_SMPL (4) +#define ENABLE_SHIFT_MAX_SMPL (12) +#define USE_DLY_MIN_SMPL (11) +#define USE_DLY_MAX_SMPL (14) + struct k3_priv { + int ctrl_id; + u32 cur_speed; struct regmap *reg; }; @@ -38,6 +68,41 @@ static unsigned long dw_mci_hi6220_caps[] = { 0 }; +struct hs_timing { + u32 drv_phase; + u32 smpl_dly; + u32 smpl_phase_max; + u32 smpl_phase_min; +}; + +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = { + { /* reserved */ }, + { /* SD */ + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ + {6, 0, 4, 4,}, /* 1: MMC_HS */ + {6, 0, 3, 3,}, /* 2: SD_HS */ + {6, 0, 15, 15,}, /* 3: SDR12 */ + {6, 0, 2, 2,}, /* 4: SDR25 */ + {4, 0, 11, 0,}, /* 5: SDR50 */ + {6, 4, 15, 0,}, /* 6: SDR104 */ + {0}, /* 7: DDR50 */ + {0}, /* 8: DDR52 */ + {0}, /* 9: HS200 */ + }, + { /* SDIO */ + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ + {0}, /* 1: MMC_HS */ + {6, 0, 15, 15,}, /* 2: SD_HS */ + {6, 0, 15, 15,}, /* 3: SDR12 */ + {6, 0, 0, 0,}, /* 4: SDR25 */ + {4, 0, 12, 0,}, /* 5: SDR50 */ + {5, 4, 15, 0,}, /* 6: SDR104 */ + {0}, /* 7: DDR50 */ + {0}, /* 8: DDR52 */ + {0}, /* 9: HS200 */ + } +}; + static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) { int ret; @@ -66,6 +131,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host) if (IS_ERR(priv->reg)) priv->reg = NULL; + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); + if (priv->ctrl_id < 0) + priv->ctrl_id = 0; + host->priv = priv; return 0; } @@ -144,7 +213,236 @@ static const struct dw_mci_drv_data hi6220_data = { .execute_tuning = dw_mci_hi6220_execute_tuning, }; +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, + int smpl_phase) +{ + u32 drv_phase; + u32 smpl_dly; + u32 use_smpl_dly = 0; + u32 enable_shift = 0; + u32 reg_value; + int ctrl_id; + struct k3_priv *priv; + + priv = host->priv; + ctrl_id = priv->ctrl_id; + + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase; + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly; + if (smpl_phase == -1) + smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max + + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2; + + switch (timing) { + case MMC_TIMING_UHS_SDR104: + if (smpl_phase >= USE_DLY_MIN_SMPL && + smpl_phase <= USE_DLY_MAX_SMPL) + use_smpl_dly = 1; + /* fallthrough */ + case MMC_TIMING_UHS_SDR50: + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL && + smpl_phase <= ENABLE_SHIFT_MAX_SMPL) + enable_shift = 1; + break; + } + + mci_writel(host, GPIO, 0x0); + usleep_range(5, 10); + + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) | + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) | + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase); + mci_writel(host, UHS_REG_EXT, reg_value); + + mci_writel(host, ENABLE_SHIFT, enable_shift); + + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) | + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly); + mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE); + + /* We should delay 1ms wait for timing setting finished. */ + usleep_range(1000, 2000); +} + +static int dw_mci_hi3660_init(struct dw_mci *host) +{ + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD, + SDMMC_CARD_RD_THR_EN)); + + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1); + host->bus_hz /= (GENCLK_DIV + 1); + + return 0; +} + +static int dw_mci_set_sel18(struct dw_mci *host, bool set) +{ + int ret; + unsigned int val; + struct k3_priv *priv; + + priv = host->priv; + + val = set ? SDCARD_IO_SEL18 : 0; + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5, + SDCARD_IO_SEL18, val); + if (ret) { + dev_err(host->dev, "sel18 %u error\n", val); + return ret; + } + + return 0; +} + +static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + int ret; + unsigned long wanted; + unsigned long actual; + struct k3_priv *priv = host->priv; + + if (!ios->clock || ios->clock == priv->cur_speed) + return; + + wanted = ios->clock * (GENCLK_DIV + 1); + ret = clk_set_rate(host->ciu_clk, wanted); + if (ret) { + dev_err(host->dev, "failed to set rate %luHz\n", wanted); + return; + } + actual = clk_get_rate(host->ciu_clk); + + dw_mci_hs_set_timing(host, ios->timing, -1); + host->bus_hz = actual / (GENCLK_DIV + 1); + host->current_speed = 0; + priv->cur_speed = host->bus_hz; +} + +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) +{ + int i; + int interval; + unsigned int v; + unsigned int len; + unsigned int range_start = 0; + unsigned int range_length = 0; + unsigned int middle_range = 0; + + if (!sample_flag) + return -EIO; + + if (~sample_flag == 0) + return 0; + + i = ffs(sample_flag) - 1; + + /* + * A clock cycle is divided into 32 phases, + * each of which is represented by a bit, + * finding the optimal phase. + */ + while (i < 32) { + v = ror32(sample_flag, i); + len = ffs(~v) - 1; + + if (len > range_length) { + range_length = len; + range_start = i; + } + + interval = ffs(v >> len) - 1; + if (interval < 0) + break; + + i += len + interval; + } + + middle_range = range_start + range_length / 2; + if (middle_range >= 32) + middle_range %= 32; + + return middle_range; +} + +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode) +{ + int i = 0; + struct dw_mci *host = slot->host; + struct mmc_host *mmc = slot->mmc; + int smpl_phase = 0; + u32 tuning_sample_flag = 0; + int best_clksmpl = 0; + + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) { + smpl_phase %= 32; + + mci_writel(host, TMOUT, ~0); + dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase); + + if (!mmc_send_tuning(mmc, opcode, NULL)) + tuning_sample_flag |= (1 << smpl_phase); + else + tuning_sample_flag &= ~(1 << smpl_phase); + } + + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag); + if (best_clksmpl < 0) { + dev_err(host->dev, "All phases bad!\n"); + return -EIO; + } + + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl); + + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n", + best_clksmpl, tuning_sample_flag); + return 0; +} + +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + int ret = 0; + struct dw_mci_slot *slot = mmc_priv(mmc); + struct k3_priv *priv; + struct dw_mci *host; + + host = slot->host; + priv = host->priv; + + if (!priv || !priv->reg) + return 0; + + if (priv->ctrl_id == DWMMC_SDIO_ID) + return 0; + + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) + ret = dw_mci_set_sel18(host, 0); + else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) + ret = dw_mci_set_sel18(host, 1); + if (ret) + return ret; + + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = mmc_regulator_set_vqmmc(mmc, ios); + if (ret) { + dev_err(host->dev, "Regulator set error %d\n", ret); + return ret; + } + } + + return 0; +} + +static const struct dw_mci_drv_data hi3660_data = { + .init = dw_mci_hi3660_init, + .set_ios = dw_mci_hi3660_set_ios, + .parse_dt = dw_mci_hi6220_parse_dt, + .execute_tuning = dw_mci_hi3660_execute_tuning, + .switch_voltage = dw_mci_hi3660_switch_voltage, +}; + static const struct of_device_id dw_mci_k3_match[] = { + { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, }, { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, {}, |