mmc: sdhci-msm: Convert to mmc_send_tuning()

Instead of having a local hack taking care of sending the tuning
command and as well to verify the response pattern, let's convert to
the common mmc_send_tuning() API instead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Georgi Djakov <gdjakov@mm-sol.com>
Acked-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

1 files changed, 7 insertions, 43 deletions

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 30804385af6d..3d32ce896b09 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -339,9 +339,7 @@ static int msm_init_cm_dll(struct sdhci_host *host)
 static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int tuning_seq_cnt = 3;
-	u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
-	const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
-	int size = sizeof(tuning_blk_pattern_4bit);
+	u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
 	int rc;
 	struct mmc_host *mmc = host->mmc;
 	struct mmc_ios ios = host->mmc->ios;
@@ -355,53 +353,21 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 	      (ios.timing == MMC_TIMING_UHS_SDR104)))
 		return 0;
 
-	if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
-	    (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
-		tuning_block_pattern = tuning_blk_pattern_8bit;
-		size = sizeof(tuning_blk_pattern_8bit);
-	}
-
-	data_buf = kmalloc(size, GFP_KERNEL);
-	if (!data_buf)
-		return -ENOMEM;
-
 retry:
 	/* First of all reset the tuning block */
 	rc = msm_init_cm_dll(host);
 	if (rc)
-		goto out;
+		return rc;
 
 	phase = 0;
 	do {
-		struct mmc_command cmd = { 0 };
-		struct mmc_data data = { 0 };
-		struct mmc_request mrq = {
-			.cmd = &cmd,
-			.data = &data
-		};
-		struct scatterlist sg;
-
 		/* Set the phase in delay line hw block */
 		rc = msm_config_cm_dll_phase(host, phase);
 		if (rc)
-			goto out;
+			return rc;
 
-		cmd.opcode = opcode;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
-		data.blksz = size;
-		data.blocks = 1;
-		data.flags = MMC_DATA_READ;
-		data.timeout_ns = NSEC_PER_SEC;	/* 1 second */
-
-		data.sg = &sg;
-		data.sg_len = 1;
-		sg_init_one(&sg, data_buf, size);
-		memset(data_buf, 0, size);
-		mmc_wait_for_req(mmc, &mrq);
-
-		if (!cmd.error && !data.error &&
-		    !memcmp(data_buf, tuning_block_pattern, size)) {
+		rc = mmc_send_tuning(mmc);
+		if (!rc) {
 			/* Tuning is successful at this tuning point */
 			tuned_phases[tuned_phase_cnt++] = phase;
 			dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
@@ -413,7 +379,7 @@ retry:
 		rc = msm_find_most_appropriate_phase(host, tuned_phases,
 						     tuned_phase_cnt);
 		if (rc < 0)
-			goto out;
+			return rc;
 		else
 			phase = rc;
 
@@ -423,7 +389,7 @@ retry:
 		 */
 		rc = msm_config_cm_dll_phase(host, phase);
 		if (rc)
-			goto out;
+			return rc;
 		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
 			 mmc_hostname(mmc), phase);
 	} else {
@@ -435,8 +401,6 @@ retry:
 		rc = -EIO;
 	}
 
-out:
-	kfree(data_buf);
 	return rc;
 }