diff options
| author | Faiz Abbas | 2020-06-19 18:27:58 +0530 |
|---|---|---|
| committer | Ulf Hansson | 2020-07-13 12:18:23 +0200 |
| commit | fe52e2fbc6ef3b36dafebde61d1d87717bcde3d4 (patch) | |
| tree | a43b7f50a3204985f0e9348c18b1db454aed5623 /drivers/mmc | |
| parent | 09db994358ece22ab68190f8be020411bef5d2e2 (diff) | |
mmc: sdhci_am654: Fix conditions for enabling dll
The clock > CLOCK_TOO_SLOW_HZ condition gating phy configuration
is only required because dll should not be enabled at too low a
clock frequency or too low timing. Make sure that this condition
only gates dll enablement.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Link: https://lore.kernel.org/r/20200619125801.9530-5-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci_am654.c | 42 |
1 files changed, 20 insertions, 22 deletions
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index 365eb2819dd9..8b0f69012d09 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -204,34 +204,32 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_set_clock(host, clock); - if (clock > CLOCK_TOO_SLOW_HZ) { - /* Setup DLL Output TAP delay */ - if (sdhci_am654->legacy_otapdly) - otap_del_sel = sdhci_am654->otap_del_sel[0]; - else - otap_del_sel = sdhci_am654->otap_del_sel[timing]; + /* Setup DLL Output TAP delay */ + if (sdhci_am654->legacy_otapdly) + otap_del_sel = sdhci_am654->otap_del_sel[0]; + else + otap_del_sel = sdhci_am654->otap_del_sel[timing]; - otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0; + otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0; - mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; - val = (otap_del_ena << OTAPDLYENA_SHIFT) | - (otap_del_sel << OTAPDLYSEL_SHIFT); + mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; + val = (otap_del_ena << OTAPDLYENA_SHIFT) | + (otap_del_sel << OTAPDLYSEL_SHIFT); - /* Write to STRBSEL for HS400 speed mode */ - if (timing == MMC_TIMING_MMC_HS400) { - if (sdhci_am654->flags & STRBSEL_4_BIT) - mask |= STRBSEL_4BIT_MASK; - else - mask |= STRBSEL_8BIT_MASK; + /* Write to STRBSEL for HS400 speed mode */ + if (timing == MMC_TIMING_MMC_HS400) { + if (sdhci_am654->flags & STRBSEL_4_BIT) + mask |= STRBSEL_4BIT_MASK; + else + mask |= STRBSEL_8BIT_MASK; - val |= sdhci_am654->strb_sel << STRBSEL_SHIFT; - } + val |= sdhci_am654->strb_sel << STRBSEL_SHIFT; + } - regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); - if (timing > MMC_TIMING_UHS_SDR25) - sdhci_am654_setup_dll(host, clock); - } + if (timing > MMC_TIMING_UHS_SDR25 && clock > CLOCK_TOO_SLOW_HZ) + sdhci_am654_setup_dll(host, clock); } static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host, |