diff options
| author | Masahiro Yamada | 2019-12-20 20:31:55 +0900 |
|---|---|---|
| committer | Miquel Raynal | 2020-01-21 20:00:33 +0100 |
| commit | a3b839e4e061c60c5f9abf4f3af638f712bf4285 (patch) | |
| tree | 11e96c590dc559d5b56d8c99c9eb40155501d27a /drivers/mtd/nand/raw | |
| parent | 711fafc287e1be25b4420752062f852930e4c1d2 (diff) | |
mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES
As commit 0d55c668b218 (mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES
register to 8 if unset") says, there were three solutions discussed:
[1] Add a DT property to specify the skipped bytes in OOB
[2] Associate the preferred value with compatible
[3] Hard-code the default value in the driver
At that time, [3] was chosen because I did not have enough information
about the other platforms than UniPhier.
That commit also says "The preferred value may vary by platform. If so,
please trade up to a different solution." My intention was to replace
[3] with [2], not keep both [2] and [3].
Now that we have switched to [2] for SOCFPGA's SPARE_AREA_SKIP_BYTES=2,
[3] should be removed. This should be OK because denali_pci.c just
gets back to the original behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers/mtd/nand/raw')
| -rw-r--r-- | drivers/mtd/nand/raw/denali.c | 21 |
1 files changed, 7 insertions, 14 deletions
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index b6c463d02167..fafd0a0aa8e2 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -21,7 +21,6 @@ #include "denali.h" #define DENALI_NAND_NAME "denali-nand" -#define DENALI_DEFAULT_OOB_SKIP_BYTES 8 /* for Indexed Addressing */ #define DENALI_INDEXED_CTRL 0x00 @@ -1302,22 +1301,16 @@ int denali_init(struct denali_controller *denali) /* * Set how many bytes should be skipped before writing data in OOB. - * If a non-zero value has already been configured, update it in HW. - * If a non-zero value has already been set (by firmware or something), - * just use it. Otherwise, set the driver's default. + * If a platform requests a non-zero value, set it to the register. + * Otherwise, read the value out, expecting it has already been set up + * by firmware. */ - if (denali->oob_skip_bytes) { + if (denali->oob_skip_bytes) iowrite32(denali->oob_skip_bytes, denali->reg + SPARE_AREA_SKIP_BYTES); - } else { - denali->oob_skip_bytes = - ioread32(denali->reg + SPARE_AREA_SKIP_BYTES); - if (!denali->oob_skip_bytes) { - denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES; - iowrite32(denali->oob_skip_bytes, - denali->reg + SPARE_AREA_SKIP_BYTES); - } - } + else + denali->oob_skip_bytes = ioread32(denali->reg + + SPARE_AREA_SKIP_BYTES); iowrite32(0, denali->reg + TRANSFER_SPARE_REG); iowrite32(GENMASK(denali->nbanks - 1, 0), denali->reg + RB_PIN_ENABLED); |