Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.
author: Richard Weinberger 2019-05-05 11:54:11 +0200
committer: Richard Weinberger 2019-05-05 11:54:11 +0200
commit: 1c7cbd634763a0f0727d425c38486f0a3a9339a7 (patch)
tree: 6fb09b8fcae59059c36f36437c8fd18cf0db983d /drivers/mtd
parent: 37624b58542fb9f2d9a70e6ea006ef8a5f66c30b (diff)
parent: 1c14fe2167ef4294b41949bcc372ea39c0510c00 (diff)
67 files changed, 3392 insertions, 2093 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 79a8ff542883..aa5a27fdfdd1 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -230,12 +230,11 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
-
 config SM_FTL
 	tristate "SmartMedia/xD new translation layer"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	select MTD_NAND_ECC
+	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables EXPERIMENTAL R/W support for SmartMedia/xD
 	  FTL (Flash translation layer).
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index aa983422aa97..f9258d666846 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers"
 config MTD_DOCG3
 	tristate "M-Systems Disk-On-Chip G3"
 	select BCH
-	select BCH_CONST_PARAMS if !MTD_NAND_BCH
+	select BCH_CONST_PARAMS if !MTD_NAND_ECC_SW_BCH
 	select BITREVERSE
 	help
 	  This provides an MTD device driver for the M-Systems DiskOnChip
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 9033215e62ea..495751ed3fd7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -2,6 +2,5 @@ config MTD_NAND_CORE
 	tristate
 
 source "drivers/mtd/nand/onenand/Kconfig"
-
 source "drivers/mtd/nand/raw/Kconfig"
 source "drivers/mtd/nand/spi/Kconfig"
diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index 9c9f8936b63b..b6de955ac8bf 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -174,6 +174,40 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
 EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
 
 /**
+ * nanddev_mtd_max_bad_blocks() - Get the maximum number of bad eraseblock on
+ *				  a specific region of the NAND device
+ * @mtd: MTD device
+ * @offs: offset of the NAND region
+ * @len: length of the NAND region
+ *
+ * Default implementation for mtd->_max_bad_blocks(). Only works if
+ * nand->memorg.max_bad_eraseblocks_per_lun is > 0.
+ *
+ * Return: a positive number encoding the maximum number of eraseblocks on a
+ * portion of memory, a negative error code otherwise.
+ */
+int nanddev_mtd_max_bad_blocks(struct mtd_info *mtd, loff_t offs, size_t len)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	struct nand_pos pos, end;
+	unsigned int max_bb = 0;
+
+	if (!nand->memorg.max_bad_eraseblocks_per_lun)
+		return -ENOTSUPP;
+
+	nanddev_offs_to_pos(nand, offs, &pos);
+	nanddev_offs_to_pos(nand, offs + len, &end);
+
+	for (nanddev_offs_to_pos(nand, offs, &pos);
+	     nanddev_pos_cmp(&pos, &end) < 0;
+	     nanddev_pos_next_lun(nand, &pos))
+		max_bb += nand->memorg.max_bad_eraseblocks_per_lun;
+
+	return max_bb;
+}
+EXPORT_SYMBOL_GPL(nanddev_mtd_max_bad_blocks);
+
+/**
  * nanddev_init() - Initialize a NAND device
  * @nand: NAND device
  * @ops: NAND device operations
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 4ca4b194e7d7..f41d76248550 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -2458,7 +2458,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
         /* We write two bytes, so we don't have to mess with 16-bit access */
-        ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+        ofs += mtd->oobsize + (this->badblockpos & ~0x01);
 	/* FIXME : What to do when marking SLC block in partition
 	 * 	   with MLC erasesize? For now, it is not advisable to
 	 *	   create partitions containing both SLC and MLC regions.
@@ -3967,6 +3967,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING))
 		this->unlock_all(mtd);
 
+	/* Set the bad block marker position */
+	this->badblockpos = ONENAND_BADBLOCK_POS;
+
 	ret = this->scan_bbt(mtd);
 	if ((!FLEXONENAND(this)) || ret)
 		return ret;
diff --git a/drivers/mtd/nand/onenand/onenand_bbt.c b/drivers/mtd/nand/onenand/onenand_bbt.c
index dde20487937d..57c31c81be18 100644
--- a/drivers/mtd/nand/onenand/onenand_bbt.c
+++ b/drivers/mtd/nand/onenand/onenand_bbt.c
@@ -190,9 +190,6 @@ static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 	if (!bbm->bbt)
 		return -ENOMEM;
 
-	/* Set the bad block position */
-	bbm->badblockpos = ONENAND_BADBLOCK_POS;
-
 	/* Set erase shift */
 	bbm->bbt_erase_shift = this->erase_shift;
 
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index e604625e2dfa..0500c42f31cb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -1,34 +1,29 @@
-config MTD_NAND_ECC
+config MTD_NAND_ECC_SW_HAMMING
 	tristate
 
-config MTD_NAND_ECC_SMC
+config MTD_NAND_ECC_SW_HAMMING_SMC
 	bool "NAND ECC Smart Media byte order"
-	depends on MTD_NAND_ECC
+	depends on MTD_NAND_ECC_SW_HAMMING
 	default n
 	help
 	  Software ECC according to the Smart Media Specification.
 	  The original Linux implementation had byte 0 and 1 swapped.
 
-
-menuconfig MTD_NAND
+menuconfig MTD_RAW_NAND
 	tristate "Raw/Parallel NAND Device Support"
 	depends on MTD
-	select MTD_NAND_ECC
+	select MTD_NAND_CORE
+	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables support for accessing all type of raw/parallel
 	  NAND flash devices. For further information see
 	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
 
-if MTD_NAND
+if MTD_RAW_NAND
 
-config MTD_NAND_BCH
-	tristate
-	select BCH
-	depends on MTD_NAND_ECC_BCH
-	default MTD_NAND
-
-config MTD_NAND_ECC_BCH
+config MTD_NAND_ECC_SW_BCH
 	bool "Support software BCH ECC"
+	select BCH
 	default n
 	help
 	  This enables support for software BCH error correction. Binary BCH
@@ -36,15 +31,13 @@ config MTD_NAND_ECC_BCH
 	  ECC codes. They are used with NAND devices requiring more than 1 bit
 	  of error correction.
 
-config MTD_SM_COMMON
-	tristate
-	default n
+comment "Raw/parallel NAND flash controllers"
 
 config MTD_NAND_DENALI
 	tristate
 
 config MTD_NAND_DENALI_PCI
-	tristate "Support Denali NAND controller on Intel Moorestown"
+	tristate "Denali NAND controller on Intel Moorestown"
 	select MTD_NAND_DENALI
 	depends on PCI
 	help
@@ -52,31 +45,22 @@ config MTD_NAND_DENALI_PCI
 	  Denali NAND controller core.
 
 config MTD_NAND_DENALI_DT
-	tristate "Support Denali NAND controller as a DT device"
+	tristate "Denali NAND controller as a DT device"
 	select MTD_NAND_DENALI
 	depends on HAS_DMA && HAVE_CLK && OF
 	help
 	  Enable the driver for NAND flash on platforms using a Denali NAND
 	  controller as a DT device.
 
-config MTD_NAND_GPIO
-	tristate "GPIO assisted NAND Flash driver"
-	depends on GPIOLIB || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables a NAND flash driver where control signals are
-	  connected to GPIO pins, and commands and data are communicated
-	  via a memory mapped interface.
-
 config MTD_NAND_AMS_DELTA
-	tristate "NAND Flash device on Amstrad E3"
+	tristate "Amstrad E3 NAND controller"
 	depends on MACH_AMS_DELTA || COMPILE_TEST
 	default y
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
+	tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
 	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -98,18 +82,6 @@ config MTD_NAND_OMAP_BCH
 config MTD_NAND_OMAP_BCH_BUILD
 	def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
 
-config MTD_NAND_RICOH
-	tristate "Ricoh xD card reader"
-	default n
-	depends on PCI
-	select MTD_SM_COMMON
-	help
-	  Enable support for Ricoh R5C852 xD card reader
-	  You also need to enable ether
-	  NAND SSFDC (SmartMedia) read only translation layer' or new
-	  expermental, readwrite
-	  'SmartMedia/xD new translation layer'
-
 config MTD_NAND_AU1550
 	tristate "Au1550/1200 NAND support"
 	depends on MIPS_ALCHEMY
@@ -117,8 +89,15 @@ config MTD_NAND_AU1550
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
 
+config MTD_NAND_NDFC
+	tristate "IBM/MCC 4xx NAND controller"
+	depends on 4xx
+	select MTD_NAND_ECC_SW_HAMMING_SMC
+	help
+	  NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
 config MTD_NAND_S3C2410
-	tristate "NAND Flash support for Samsung S3C SoCs"
+	tristate "Samsung S3C NAND controller"
 	depends on ARCH_S3C24XX || ARCH_S3C64XX
 	help
 	  This enables the NAND flash controller on the S3C24xx and S3C64xx
@@ -128,18 +107,11 @@ config MTD_NAND_S3C2410
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
-	bool "Samsung S3C NAND driver debug"
+	bool "Samsung S3C NAND controller debug"
 	depends on MTD_NAND_S3C2410
 	help
 	  Enable debugging of the S3C NAND driver
 
-config MTD_NAND_NDFC
-	tristate "NDFC NanD Flash Controller"
-	depends on 4xx
-	select MTD_NAND_ECC_SMC
-	help
-	  NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
 config MTD_NAND_S3C2410_CLKSTOP
 	bool "Samsung S3C NAND IDLE clock stop"
 	depends on MTD_NAND_S3C2410
@@ -151,89 +123,19 @@ config MTD_NAND_S3C2410_CLKSTOP
 	  approximately 5mA of power when there is nothing happening.
 
 config MTD_NAND_TANGO
-	tristate "NAND Flash support for Tango chips"
+	tristate "Tango NAND controller"
 	depends on ARCH_TANGO || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  Enables the NAND Flash controller on Tango chips.
 
-config MTD_NAND_DISKONCHIP
-	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
-	depends on HAS_IOMEM
-	select REED_SOLOMON
-	select REED_SOLOMON_DEC16
-	help
-	  This is a reimplementation of M-Systems DiskOnChip 2000,
-	  Millennium and Millennium Plus as a standard NAND device driver,
-	  as opposed to the earlier self-contained MTD device drivers.
-	  This should enable, among other things, proper JFFS2 operation on
-	  these devices.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-	bool "Advanced detection options for DiskOnChip"
-	depends on MTD_NAND_DISKONCHIP
-	help
-	  This option allows you to specify nonstandard address at which to
-	  probe for a DiskOnChip, or to change the detection options.  You
-	  are unlikely to need any of this unless you are using LinuxBIOS.
-	  Say 'N'.
-
-config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
-	hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-	depends on MTD_NAND_DISKONCHIP
-	default "0"
-	help
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option allows you to specify a single address at which to probe
-	  for the device, which is useful if you have other devices in that
-	  range which get upset when they are probed.
-
-	  (Note that on PowerPC, the normal probe will only check at
-	  0xE4000000.)
-
-	  Normally, you should leave this set to zero, to allow the probe at
-	  the normal addresses.
-
-config MTD_NAND_DISKONCHIP_PROBE_HIGH
-	bool "Probe high addresses"
-	depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-	help
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option changes to make it probe between 0xFFFC8000 and
-	  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-	  useful to you.  Say 'N'.
-
-config MTD_NAND_DISKONCHIP_BBTWRITE
-	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
-	depends on MTD_NAND_DISKONCHIP
-	help
-	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
-	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
-	  device for the Bad Block Table (BBT).  If you have existing INFTL
-	  data on your device (created by non-Linux tools such as M-Systems'
-	  DOS drivers), your data might overlap the area Linux wants to use for
-	  the BBT.  If this is a concern for you, leave this option disabled and
-	  Linux will not write BBT data into this area.
-	  The downside of leaving this option disabled is that if bad blocks
-	  are detected by Linux, they will not be recorded in the BBT, which
-	  could cause future problems.
-	  Once you enable this option, new filesystems (INFTL or others, created
-	  in Linux or other operating systems) will not use the reserved area.
-	  The only reason not to enable this option is to prevent damage to
-	  preexisting filesystems.
-	  Even if you leave this disabled, you can enable BBT writes at module
-	  load time (assuming you build diskonchip as a module) with the module
-	  parameter "inftl_bbt_write=1".
-
 config MTD_NAND_SHARPSL
-	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+	tristate "Sharp SL Series (C7xx + others) NAND controller"
 	depends on ARCH_PXA || COMPILE_TEST
 	depends on HAS_IOMEM
 
 config MTD_NAND_CAFE
-	tristate "NAND support for OLPC CAFÉ chip"
+	tristate "OLPC CAFÉ NAND controller"
 	depends on PCI
 	select REED_SOLOMON
 	select REED_SOLOMON_DEC16
@@ -242,7 +144,7 @@ config MTD_NAND_CAFE
 	  laptop.
 
 config MTD_NAND_CS553X
-	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+	tristate "CS5535/CS5536 (AMD Geode companion) NAND controller"
 	depends on X86_32
 	depends on !UML && HAS_IOMEM
 	help
@@ -256,7 +158,7 @@ config MTD_NAND_CS553X
 	  If you say "m", the module will be called cs553x_nand.
 
 config MTD_NAND_ATMEL
-	tristate "Support for NAND Flash / SmartMedia on AT91"
+	tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on HAS_IOMEM
 	select GENERIC_ALLOCATOR
@@ -265,8 +167,17 @@ config MTD_NAND_ATMEL
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 processors.
 
+config MTD_NAND_ORION
+	tristate "Marvell Orion NAND controller"
+	depends on PLAT_ORION
+	help
+	  This enables the NAND flash controller on Orion machines.
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
 config MTD_NAND_MARVELL
-	tristate "NAND controller support on Marvell boards"
+	tristate "Marvell EBU NAND controller"
 	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
 		   COMPILE_TEST
 	depends on HAS_IOMEM
@@ -278,7 +189,7 @@ config MTD_NAND_MARVELL
 	  - 64-bit Aramda platforms (7k, 8k) (NFCv2)
 
 config MTD_NAND_SLC_LPC32XX
-	tristate "NXP LPC32xx SLC Controller"
+	tristate "NXP LPC32xx SLC NAND controller"
 	depends on ARCH_LPC32XX || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -290,7 +201,7 @@ config MTD_NAND_SLC_LPC32XX
 	  by the SLC NAND controller.
 
 config MTD_NAND_MLC_LPC32XX
-	tristate "NXP LPC32xx MLC Controller"
+	tristate "NXP LPC32xx MLC NAND controller"
 	depends on ARCH_LPC32XX || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -302,38 +213,23 @@ config MTD_NAND_MLC_LPC32XX
 	  by the MLC NAND controller.
 
 config MTD_NAND_CM_X270
-	tristate "Support for NAND Flash on CM-X270 modules"
+	tristate "CM-X270 modules NAND controller"
 	depends on MACH_ARMCORE
 
 config MTD_NAND_PASEMI
-	tristate "NAND support for PA Semi PWRficient"
+	tristate "PA Semi PWRficient NAND controller"
 	depends on PPC_PASEMI
 	help
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
 config MTD_NAND_TMIO
-	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	tristate "Toshiba Mobile IO NAND controller"
 	depends on MFD_TMIO
 	help
 	  Support for NAND flash connected to a Toshiba Mobile IO
 	  Controller in some PDAs, including the Sharp SL6000x.
 
-config MTD_NAND_NANDSIM
-	tristate "Support for NAND Flash Simulator"
-	help
-	  The simulator may simulate various NAND flash chips for the
-	  MTD nand layer.
-
-config MTD_NAND_GPMI_NAND
-	tristate "GPMI NAND Flash Controller driver"
-	depends on MXS_DMA
-	help
-	  Enables NAND Flash support for IMX23, IMX28 or IMX6.
-	  The GPMI controller is very powerful, with the help of BCH
-	  module, it can do the hardware ECC. The GPMI supports several
-	  NAND flashs at the same time.
-
 config MTD_NAND_BRCMNAND
 	tristate "Broadcom STB NAND controller"
 	depends on ARM || ARM64 || MIPS || COMPILE_TEST
@@ -344,7 +240,7 @@ config MTD_NAND_BRCMNAND
 	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
 
 config MTD_NAND_BCM47XXNFLASH
-	tristate "Support for NAND flash on BCM4706 BCMA bus"
+	tristate "BCM4706 BCMA NAND controller"
 	depends on BCMA_NFLASH
 	depends on BCMA
 	help
@@ -352,32 +248,31 @@ config MTD_NAND_BCM47XXNFLASH
 	  registered by bcma as platform devices. This enables driver for
 	  NAND flash memories. For now only BCM4706 is supported.
 
-config MTD_NAND_PLATFORM
-	tristate "Support for generic platform NAND driver"
+config MTD_NAND_OXNAS
+	tristate "Oxford Semiconductor NAND controller"
+	depends on ARCH_OXNAS || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
-	  This implements a generic NAND driver for on-SOC platform
-	  devices. You will need to provide platform-specific functions
-	  via platform_data.
+	  This enables the NAND flash controller on Oxford Semiconductor SoCs.
 
-config MTD_NAND_ORION
-	tristate "NAND Flash support for Marvell Orion SoC"
-	depends on PLAT_ORION
+config MTD_NAND_MPC5121_NFC
+	tristate "MPC5121 NAND controller"
+	depends on PPC_MPC512x
 	help
-	  This enables the NAND flash controller on Orion machines.
-
-	  No board specific support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
+	  This enables the driver for the NAND flash controller on the
+	  MPC5121 SoC.
 
-config MTD_NAND_OXNAS
-	tristate "NAND Flash support for Oxford Semiconductor SoC"
-	depends on ARCH_OXNAS || COMPILE_TEST
-	depends on HAS_IOMEM
+config MTD_NAND_GPMI_NAND
+	tristate "Freescale GPMI NAND controller"
+	depends on MXS_DMA
 	help
-	  This enables the NAND flash controller on Oxford Semiconductor SoCs.
+	  Enables NAND Flash support for IMX23, IMX28 or IMX6.
+	  The GPMI controller is very powerful, with the help of BCH
+	  module, it can do the hardware ECC. The GPMI supports several
+	  NAND flashs at the same time.
 
 config MTD_NAND_FSL_ELBC
-	tristate "NAND support for Freescale eLBC controllers"
+	tristate "Freescale eLBC NAND controller"
 	depends on FSL_SOC
 	select FSL_LBC
 	help
@@ -387,7 +282,7 @@ config MTD_NAND_FSL_ELBC
 	  external NAND devices.
 
 config MTD_NAND_FSL_IFC
-	tristate "NAND support for Freescale IFC controller"
+	tristate "Freescale IFC NAND controller"
 	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
 	depends on HAS_IOMEM
 	select FSL_IFC
@@ -399,22 +294,15 @@ config MTD_NAND_FSL_IFC
 	  external NAND devices.
 
 config MTD_NAND_FSL_UPM
-	tristate "Support for NAND on Freescale UPM"
+	tristate "Freescale UPM NAND controller"
 	depends on PPC_83xx || PPC_85xx
 	select FSL_LBC
 	help
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
 	  processor localbus with User-Programmable Machine support.
 
-config MTD_NAND_MPC5121_NFC
-	tristate "MPC5121 built-in NAND Flash Controller support"
-	depends on PPC_MPC512x
-	help
-	  This enables the driver for the NAND flash controller on the
-	  MPC5121 SoC.
-
 config MTD_NAND_VF610_NFC
-	tristate "Support for Freescale NFC for VF610/MPC5125"
+	tristate "Freescale VF610/MPC5125 NAND controller"
 	depends on (SOC_VF610 || COMPILE_TEST)
 	depends on HAS_IOMEM
 	help
@@ -426,7 +314,7 @@ config MTD_NAND_VF610_NFC
 	  device tree.
 
 config MTD_NAND_MXC
-	tristate "MXC NAND support"
+	tristate "Freescale MXC NAND controller"
 	depends on ARCH_MXC || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -434,7 +322,7 @@ config MTD_NAND_MXC
 	  MXC processors.
 
 config MTD_NAND_SH_FLCTL
-	tristate "Support for NAND on Renesas SuperH FLCTL"
+	tristate "Renesas SuperH FLCTL NAND controller"
 	depends on SUPERH || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -442,7 +330,7 @@ config MTD_NAND_SH_FLCTL
 	  for NAND Flash using FLCTL.
 
 config MTD_NAND_DAVINCI
-	tristate "Support NAND on DaVinci/Keystone SoC"
+	tristate "DaVinci/Keystone NAND controller"
 	depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -450,42 +338,30 @@ config MTD_NAND_DAVINCI
 	  DaVinci/Keystone processors.
 
 config MTD_NAND_TXX9NDFMC
-	tristate "NAND Flash support for TXx9 SoC"
+	tristate "TXx9 NAND controller"
 	depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables the NAND flash controller on the TXx9 SoCs.
 
 config MTD_NAND_SOCRATES
-	tristate "Support for NAND on Socrates board"
+	tristate "Socrates NAND controller"
 	depends on SOCRATES
 	help
 	  Enables support for NAND Flash chips wired onto Socrates board.
 
 config MTD_NAND_NUC900
-	tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
+	tristate "Nuvoton NUC9xx/w90p910 NAND controller"
 	depends on ARCH_W90X900 || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  This enables the driver for the NAND Flash on evaluation board based
 	  on w90p910 / NUC9xx.
 
-config MTD_NAND_JZ4740
-	tristate "Support for JZ4740 SoC NAND controller"
-	depends on MACH_JZ4740 || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  Enables support for NAND Flash on JZ4740 SoC based boards.
-
-config MTD_NAND_JZ4780
-	tristate "Support for NAND on JZ4780 SoC"
-	depends on JZ4780_NEMC
-	help
-	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
-	  based boards, using the BCH controller for hardware error correction.
+source "drivers/mtd/nand/raw/ingenic/Kconfig"
 
 config MTD_NAND_FSMC
-	tristate "Support for NAND on ST Micros FSMC"
+	tristate "ST Micros FSMC NAND controller"
 	depends on OF && HAS_IOMEM
 	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
 		   COMPILE_TEST
@@ -494,28 +370,28 @@ config MTD_NAND_FSMC
 	  Flexible Static Memory Controller (FSMC)
 
 config MTD_NAND_XWAY
-	bool "Support for NAND on Lantiq XWAY SoC"
+	bool "Lantiq XWAY NAND controller"
 	depends on LANTIQ && SOC_TYPE_XWAY
 	help
 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
 	  to the External Bus Unit (EBU).
 
 config MTD_NAND_SUNXI
-	tristate "Support for NAND on Allwinner SoCs"
+	tristate "Allwinner NAND controller"
 	depends on ARCH_SUNXI || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  Enables support for NAND Flash chips on Allwinner SoCs.
 
 config MTD_NAND_HISI504
-	tristate "Support for NAND controller on Hisilicon SoC Hip04"
+	tristate "Hisilicon Hip04 NAND controller"
 	depends on ARCH_HISI || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
 	  Enables support for NAND controller on Hisilicon SoC Hip04.
 
 config MTD_NAND_QCOM
-	tristate "Support for NAND on QCOM SoCs"
+	tristate "QCOM NAND controller"
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -523,7 +399,7 @@ config MTD_NAND_QCOM
 	  controller. This controller is found on IPQ806x SoC.
 
 config MTD_NAND_MTK
-	tristate "Support for NAND controller on MTK SoCs"
+	tristate "MTK NAND controller"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -531,7 +407,7 @@ config MTD_NAND_MTK
 	  This controller is found on mt27xx, mt81xx, mt65xx SoCs.
 
 config MTD_NAND_TEGRA
-	tristate "Support for NAND controller on NVIDIA Tegra"
+	tristate "NVIDIA Tegra NAND controller"
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
@@ -558,4 +434,115 @@ config MTD_NAND_MESON
 	  Enables support for NAND controller on Amlogic's Meson SoCs.
 	  This controller is found on Meson SoCs.
 
-endif # MTD_NAND
+config MTD_NAND_GPIO
+	tristate "GPIO assisted NAND controller"
+	depends on GPIOLIB || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This enables a NAND flash driver where control signals are
+	  connected to GPIO pins, and commands and data are communicated
+	  via a memory mapped interface.
+
+config MTD_NAND_PLATFORM
+	tristate "Generic NAND controller"
+	depends on HAS_IOMEM
+	help
+	  This implements a generic NAND driver for on-SOC platform
+	  devices. You will need to provide platform-specific functions
+	  via platform_data.
+
+comment "Misc"
+
+config MTD_SM_COMMON
+	tristate
+	default n
+
+config MTD_NAND_NANDSIM
+	tristate "Support for NAND Flash Simulator"
+	help
+	  The simulator may simulate various NAND flash chips for the
+	  MTD nand layer.
+
+config MTD_NAND_RICOH
+	tristate "Ricoh xD card reader"
+	default n
+	depends on PCI
+	select MTD_SM_COMMON
+	help
+	  Enable support for Ricoh R5C852 xD card reader
+	  You also need to enable ether
+	  NAND SSFDC (SmartMedia) read only translation layer' or new
+	  expermental, readwrite
+	  'SmartMedia/xD new translation layer'
+
+config MTD_NAND_DISKONCHIP
+	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+	depends on HAS_IOMEM
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC16
+	help
+	  This is a reimplementation of M-Systems DiskOnChip 2000,
+	  Millennium and Millennium Plus as a standard NAND device driver,
+	  as opposed to the earlier self-contained MTD device drivers.
+	  This should enable, among other things, proper JFFS2 operation on
+	  these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+	bool "Advanced detection options for DiskOnChip"
+	depends on MTD_NAND_DISKONCHIP
+	help
+	  This option allows you to specify nonstandard address at which to
+	  probe for a DiskOnChip, or to change the detection options.  You
+	  are unlikely to need any of this unless you are using LinuxBIOS.
+	  Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+	hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+	depends on MTD_NAND_DISKONCHIP
+	default "0"
+	help
+	  By default, the probe for DiskOnChip devices will look for a
+	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+	  This option allows you to specify a single address at which to probe
+	  for the device, which is useful if you have other devices in that
+	  range which get upset when they are probed.
+
+	  (Note that on PowerPC, the normal probe will only check at
+	  0xE4000000.)
+
+	  Normally, you should leave this set to zero, to allow the probe at
+	  the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+	bool "Probe high addresses"
+	depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+	help
+	  By default, the probe for DiskOnChip devices will look for a
+	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+	  This option changes to make it probe between 0xFFFC8000 and
+	  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+	  useful to you.  Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+	depends on MTD_NAND_DISKONCHIP
+	help
+	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
+	  device for the Bad Block Table (BBT).  If you have existing INFTL
+	  data on your device (created by non-Linux tools such as M-Systems'
+	  DOS drivers), your data might overlap the area Linux wants to use for
+	  the BBT.  If this is a concern for you, leave this option disabled and
+	  Linux will not write BBT data into this area.
+	  The downside of leaving this option disabled is that if bad blocks
+	  are detected by Linux, they will not be recorded in the BBT, which
+	  could cause future problems.
+	  Once you enable this option, new filesystems (INFTL or others, created
+	  in Linux or other operating systems) will not use the reserved area.
+	  The only reason not to enable this option is to prevent damage to
+	  preexisting filesystems.
+	  Even if you leave this disabled, you can enable BBT writes at module
+	  load time (assuming you build diskonchip as a module) with the module
+	  parameter "inftl_bbt_write=1".
+
+endif # MTD_RAW_NAND
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 5a5a72f0793e..efaf5cd25edc 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_MTD_NAND)			+= nand.o
-obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
-obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
+obj-$(CONFIG_MTD_RAW_NAND)		+= nand.o
+obj-$(CONFIG_MTD_NAND_ECC_SW_HAMMING)	+= nand_ecc.o
+nand-$(CONFIG_MTD_NAND_ECC_SW_BCH)	+= nand_bch.o
 obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
 
 obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
@@ -45,8 +45,7 @@ obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
-obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
-obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
+obj-y					+= ingenic/
 obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 5781fcf6b76c..8d6be90a6fe8 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2017 ATMEL
  * Copyright 2017 Free Electrons
@@ -29,10 +30,6 @@
  *   Add Nand Flash Controller support for SAMA5 SoC
  *	Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * A few words about the naming convention in this file. This convention
  * applies to structure and function names.
  *
@@ -65,6 +62,7 @@
 #include <linux/iopoll.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
 
 #include "pmecc.h"
 
@@ -211,6 +209,7 @@ struct atmel_nand_controller_caps {
 	bool legacy_of_bindings;
 	u32 ale_offs;
 	u32 cle_offs;
+	const char *ebi_csa_regmap_name;
 	const struct atmel_nand_controller_ops *ops;
 };
 
@@ -231,10 +230,15 @@ to_nand_controller(struct nand_controller *ctl)
 	return container_of(ctl, struct atmel_nand_controller, base);
 }
 
+struct atmel_smc_nand_ebi_csa_cfg {
+	u32 offs;
+	u32 nfd0_on_d16;
+};
+
 struct atmel_smc_nand_controller {
 	struct atmel_nand_controller base;
-	struct regmap *matrix;
-	unsigned int ebi_csa_offs;
+	struct regmap *ebi_csa_regmap;
+	struct atmel_smc_nand_ebi_csa_cfg *ebi_csa;
 };
 
 static inline struct atmel_smc_nand_controller *
@@ -1068,15 +1072,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
 		req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
 	else if (chip->ecc.strength)
 		req.ecc.strength = chip->ecc.strength;
-	else if (chip->ecc_strength_ds)
-		req.ecc.strength = chip->ecc_strength_ds;
+	else if (chip->base.eccreq.strength)
+		req.ecc.strength = chip->base.eccreq.strength;
 	else
 		req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
 
 	if (chip->ecc.size)
 		req.ecc.sectorsize = chip->ecc.size;
-	else if (chip->ecc_step_ds)
-		req.ecc.sectorsize = chip->ecc_step_ds;
+	else if (chip->base.eccreq.step_size)
+		req.ecc.sectorsize = chip->base.eccreq.step_size;
 	else
 		req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
 
@@ -1507,13 +1511,20 @@ static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
 	atmel_nand_init(nc, nand);
 
 	smc_nc = to_smc_nand_controller(chip->controller);
-	if (!smc_nc->matrix)
+	if (!smc_nc->ebi_csa_regmap)
 		return;
 
 	/* Attach the CS to the NAND Flash logic. */
 	for (i = 0; i < nand->numcs; i++)
-		regmap_update_bits(smc_nc->matrix, smc_nc->ebi_csa_offs,
+		regmap_update_bits(smc_nc->ebi_csa_regmap,
+				   smc_nc->ebi_csa->offs,
 				   BIT(nand->cs[i].id), BIT(nand->cs[i].id));
+
+	if (smc_nc->ebi_csa->nfd0_on_d16)
+		regmap_update_bits(smc_nc->ebi_csa_regmap,
+				   smc_nc->ebi_csa->offs,
+				   smc_nc->ebi_csa->nfd0_on_d16,
+				   smc_nc->ebi_csa->nfd0_on_d16);
 }
 
 static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc,
@@ -1797,7 +1808,7 @@ static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc)
 
 	ret = of_property_read_u32(np, "#size-cells", &val);
 	if (ret) {
-		dev_err(dev, "missing #address-cells property\n");
+		dev_err(dev, "missing #size-cells property\n");
 		return ret;
 	}
 
@@ -1833,34 +1844,71 @@ static void atmel_nand_controller_cleanup(struct atmel_nand_controller *nc)
 	clk_put(nc->mck);
 }
 
-static const struct of_device_id atmel_matrix_of_ids[] = {
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9260_ebi_csa = {
+	.offs = AT91SAM9260_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9261_ebi_csa = {
+	.offs = AT91SAM9261_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9263_ebi_csa = {
+	.offs = AT91SAM9263_MATRIX_EBI0CSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9rl_ebi_csa = {
+	.offs = AT91SAM9RL_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9g45_ebi_csa = {
+	.offs = AT91SAM9G45_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9n12_ebi_csa = {
+	.offs = AT91SAM9N12_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg at91sam9x5_ebi_csa = {
+	.offs = AT91SAM9X5_MATRIX_EBICSA,
+};
+
+static const struct atmel_smc_nand_ebi_csa_cfg sam9x60_ebi_csa = {
+	.offs = AT91_SFR_CCFG_EBICSA,
+	.nfd0_on_d16 = AT91_SFR_CCFG_NFD0_ON_D16,
+};
+
+static const struct of_device_id atmel_ebi_csa_regmap_of_ids[] = {
 	{
 		.compatible = "atmel,at91sam9260-matrix",
-		.data = (void *)AT91SAM9260_MATRIX_EBICSA,
+		.data = &at91sam9260_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9261-matrix",
-		.data = (void *)AT91SAM9261_MATRIX_EBICSA,
+		.data = &at91sam9261_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9263-matrix",
-		.data = (void *)AT91SAM9263_MATRIX_EBI0CSA,
+		.data = &at91sam9263_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9rl-matrix",
-		.data = (void *)AT91SAM9RL_MATRIX_EBICSA,
+		.data = &at91sam9rl_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9g45-matrix",
-		.data = (void *)AT91SAM9G45_MATRIX_EBICSA,
+		.data = &at91sam9g45_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9n12-matrix",
-		.data = (void *)AT91SAM9N12_MATRIX_EBICSA,
+		.data = &at91sam9n12_ebi_csa,
 	},
 	{
 		.compatible = "atmel,at91sam9x5-matrix",
-		.data = (void *)AT91SAM9X5_MATRIX_EBICSA,
+		.data = &at91sam9x5_ebi_csa,
+	},
+	{
+		.compatible = "microchip,sam9x60-sfr",
+		.data = &sam9x60_ebi_csa,
 	},
 	{ /* sentinel */ },
 };
@@ -1982,37 +2030,38 @@ atmel_smc_nand_controller_init(struct atmel_smc_nand_controller *nc)
 	struct device_node *np;
 	int ret;
 
-	/* We do not retrieve the matrix syscon when parsing old DTs. */
+	/* We do not retrieve the EBICSA regmap when parsing old DTs. */
 	if (nc->base.caps->legacy_of_bindings)
 		return 0;
 
-	np = of_parse_phandle(dev->parent->of_node, "atmel,matrix", 0);
+	np = of_parse_phandle(dev->parent->of_node,
+			      nc->base.caps->ebi_csa_regmap_name, 0);
 	if (!np)
 		return 0;
 
-	match = of_match_node(atmel_matrix_of_ids, np);
+	match = of_match_node(atmel_ebi_csa_regmap_of_ids, np);
 	if (!match) {
 		of_node_put(np);
 		return 0;
 	}
 
-	nc->matrix = syscon_node_to_regmap(np);
+	nc->ebi_csa_regmap = syscon_node_to_regmap(np);
 	of_node_put(np);
-	if (IS_ERR(nc->matrix)) {
-		ret = PTR_ERR(nc->matrix);
-		dev_err(dev, "Could not get Matrix regmap (err = %d)\n", ret);
+	if (IS_ERR(nc->ebi_csa_regmap)) {
+		ret = PTR_ERR(nc->ebi_csa_regmap);
+		dev_err(dev, "Could not get EBICSA regmap (err = %d)\n", ret);
 		return ret;
 	}
 
-	nc->ebi_csa_offs = (uintptr_t)match->data;
+	nc->ebi_csa = (struct atmel_smc_nand_ebi_csa_cfg *)match->data;
 
 	/*
 	 * The at91sam9263 has 2 EBIs, if the NAND controller is under EBI1
-	 * add 4 to ->ebi_csa_offs.
+	 * add 4 to ->ebi_csa->offs.
 	 */
 	if (of_device_is_compatible(dev->parent->of_node,
 				    "atmel,at91sam9263-ebi1"))
-		nc->ebi_csa_offs += 4;
+		nc->ebi_csa->offs += 4;
 
 	return 0;
 }
@@ -2341,6 +2390,7 @@ static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
 static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = {
 	.ale_offs = BIT(21),
 	.cle_offs = BIT(22),
+	.ebi_csa_regmap_name = "atmel,matrix",
 	.ops = &at91rm9200_nc_ops,
 };
 
@@ -2355,12 +2405,14 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
 static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
 	.ale_offs = BIT(21),
 	.cle_offs = BIT(22),
+	.ebi_csa_regmap_name = "atmel,matrix",
 	.ops = &atmel_smc_nc_ops,
 };
 
 static const struct atmel_nand_controller_caps atmel_sam9261_nc_caps = {
 	.ale_offs = BIT(22),
 	.cle_offs = BIT(21),
+	.ebi_csa_regmap_name = "atmel,matrix",
 	.ops = &atmel_smc_nc_ops,
 };
 
@@ -2368,6 +2420,15 @@ static const struct atmel_nand_controller_caps atmel_sam9g45_nc_caps = {
 	.has_dma = true,
 	.ale_offs = BIT(21),
 	.cle_offs = BIT(22),
+	.ebi_csa_regmap_name = "atmel,matrix",
+	.ops = &atmel_smc_nc_ops,
+};
+
+static const struct atmel_nand_controller_caps microchip_sam9x60_nc_caps = {
+	.has_dma = true,
+	.ale_offs = BIT(21),
+	.cle_offs = BIT(22),
+	.ebi_csa_regmap_name = "microchip,sfr",
 	.ops = &atmel_smc_nc_ops,
 };
 
@@ -2415,6 +2476,10 @@ static const struct of_device_id atmel_nand_controller_of_ids[] = {
 		.compatible = "atmel,sama5d3-nand-controller",
 		.data = &atmel_sama5_nc_caps,
 	},
+	{
+		.compatible = "microchip,sam9x60-nand-controller",
+		.data = &microchip_sam9x60_nc_caps,
+	},
 	/* Support for old/deprecated bindings: */
 	{
 		.compatible = "atmel,at91rm9200-nand",
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
index 9d3997840889..cbb023bf00f7 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.c
+++ b/drivers/mtd/nand/raw/atmel/pmecc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2017 ATMEL
  * Copyright 2017 Free Electrons
@@ -28,10 +29,6 @@
  *   Add Nand Flash Controller support for SAMA5 SoC
  *	Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * The PMECC is an hardware assisted BCH engine, which means part of the
  * ECC algorithm is left to the software. The hardware/software repartition
  * is explained in the "PMECC Controller Functional Description" chapter in
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.h b/drivers/mtd/nand/raw/atmel/pmecc.h
index 808f1be0d6ad..7851c05126cf 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.h
+++ b/drivers/mtd/nand/raw/atmel/pmecc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * © Copyright 2016 ATMEL
  * © Copyright 2016 Free Electrons
@@ -28,11 +29,6 @@
  *
  *    Add Nand Flash Controller support for SAMA5 SoC
  *        © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef ATMEL_PMECC_H
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index a37cbfe56567..a53ffb3d64b0 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -428,7 +428,7 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 	}
 
 	/* Configure FLASH */
-	chipsize = b47n->nand_chip.chipsize >> 20;
+	chipsize = nanddev_target_size(&b47n->nand_chip.base) >> 20;
 	tbits = ffs(chipsize); /* find first bit set */
 	if (!tbits || tbits != fls(chipsize)) {
 		pr_err("Invalid flash size: 0x%lX\n", chipsize);
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 482c6f093f99..ce0b8ffc7812 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1676,11 +1676,8 @@ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
 	int page = addr >> chip->page_shift;
 	int ret;
 
-	if (!buf) {
-		buf = chip->data_buf;
-		/* Invalidate page cache */
-		chip->pagebuf = -1;
-	}
+	if (!buf)
+		buf = nand_get_data_buf(chip);
 
 	sas = mtd->oobsize / chip->ecc.steps;
 
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 24aeafc67cd4..3102ddbd8abd 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -3,7 +3,7 @@
  * NAND Flash Controller Device Driver
  * Copyright © 2009-2010, Intel Corporation and its suppliers.
  *
- * Copyright (c) 2017 Socionext Inc.
+ * Copyright (c) 2017-2019 Socionext Inc.
  *   Reworked by Masahiro Yamada <yamada.masahiro@socionext.com>
  */
 
@@ -40,11 +40,16 @@
 #define DENALI_BANK(denali)	((denali)->active_bank << 24)
 
 #define DENALI_INVALID_BANK	-1
-#define DENALI_NR_BANKS		4
 
-static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
+static struct denali_chip *to_denali_chip(struct nand_chip *chip)
 {
-	return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
+	return container_of(chip, struct denali_chip, chip);
+}
+
+static struct denali_controller *to_denali_controller(struct nand_chip *chip)
+{
+	return container_of(chip->controller, struct denali_controller,
+			    controller);
 }
 
 /*
@@ -52,12 +57,12 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
  * type, bank, block, and page address).  The slave data is the actual data to
  * be transferred.  This mode requires 28 bits of address region allocated.
  */
-static u32 denali_direct_read(struct denali_nand_info *denali, u32 addr)
+static u32 denali_direct_read(struct denali_controller *denali, u32 addr)
 {
 	return ioread32(denali->host + addr);
 }
 
-static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
+static void denali_direct_write(struct denali_controller *denali, u32 addr,
 				u32 data)
 {
 	iowrite32(data, denali->host + addr);
@@ -69,77 +74,62 @@ static void denali_direct_write(struct denali_nand_info *denali, u32 addr,
  * control information and transferred data are latched by the registers in
  * the translation module.
  */
-static u32 denali_indexed_read(struct denali_nand_info *denali, u32 addr)
+static u32 denali_indexed_read(struct denali_controller *denali, u32 addr)
 {
 	iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
 	return ioread32(denali->host + DENALI_INDEXED_DATA);
 }
 
-static void denali_indexed_write(struct denali_nand_info *denali, u32 addr,
+static void denali_indexed_write(struct denali_controller *denali, u32 addr,
 				 u32 data)
 {
 	iowrite32(addr, denali->host + DENALI_INDEXED_CTRL);
 	iowrite32(data, denali->host + DENALI_INDEXED_DATA);
 }
 
-/*
- * Use the configuration feature register to determine the maximum number of
- * banks that the hardware supports.
- */
-static void denali_detect_max_banks(struct denali_nand_info *denali)
-{
-	uint32_t features = ioread32(denali->reg + FEATURES);
-
-	denali->max_banks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
-
-	/* the encoding changed from rev 5.0 to 5.1 */
-	if (denali->revision < 0x0501)
-		denali->max_banks <<= 1;
-}
-
-static void denali_enable_irq(struct denali_nand_info *denali)
+static void denali_enable_irq(struct denali_controller *denali)
 {
 	int i;
 
-	for (i = 0; i < DENALI_NR_BANKS; i++)
+	for (i = 0; i < denali->nbanks; i++)
 		iowrite32(U32_MAX, denali->reg + INTR_EN(i));
 	iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE);
 }
 
-static void denali_disable_irq(struct denali_nand_info *denali)
+static void denali_disable_irq(struct denali_controller *denali)
 {
 	int i;
 
-	for (i = 0; i < DENALI_NR_BANKS; i++)
+	for (i = 0; i < denali->nbanks; i++)
 		iowrite32(0, denali->reg + INTR_EN(i));
 	iowrite32(0, denali->reg + GLOBAL_INT_ENABLE);
 }
 
-static void denali_clear_irq(struct denali_nand_info *denali,
-			     int bank, uint32_t irq_status)
+static void denali_clear_irq(struct denali_controller *denali,
+			     int bank, u32 irq_status)
 {
 	/* write one to clear bits */
 	iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
 }
 
-static void denali_clear_irq_all(struct denali_nand_info *denali)
+static void denali_clear_irq_all(struct denali_controller *denali)
 {
 	int i;
 
-	for (i = 0; i < DENALI_NR_BANKS; i++)
+	for (i = 0; i < denali->nbanks; i++)
 		denali_clear_irq(denali, i, U32_MAX);
 }
 
 static irqreturn_t denali_isr(int irq, void *dev_id)
 {
-	struct denali_nand_info *denali = dev_id;
+	struct denali_controller *denali = dev_id;
 	irqreturn_t ret = IRQ_NONE;
-	uint32_t irq_status;
+	u32 irq_status;
 	int i;
 
 	spin_lock(&denali->irq_lock);
 
-	for (i = 0; i < DENALI_NR_BANKS; i++) {
+	for (i = 0; i < denali->nbanks; i++) {
 		irq_status = ioread32(denali->reg + INTR_STATUS(i));
 		if (irq_status)
 			ret = IRQ_HANDLED;
@@ -160,7 +150,7 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
 	return ret;
 }
 
-static void denali_reset_irq(struct denali_nand_info *denali)
+static void denali_reset_irq(struct denali_controller *denali)
 {
 	unsigned long flags;
 
@@ -170,11 +160,10 @@ static void denali_reset_irq(struct denali_nand_info *denali)
 	spin_unlock_irqrestore(&denali->irq_lock, flags);
 }
 
-static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
-				    uint32_t irq_mask)
+static u32 denali_wait_for_irq(struct denali_controller *denali, u32 irq_mask)
 {
 	unsigned long time_left, flags;
-	uint32_t irq_status;
+	u32 irq_status;
 
 	spin_lock_irqsave(&denali->irq_lock, flags);
 
@@ -201,128 +190,259 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
 	return denali->irq_status;
 }
 
-static void denali_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
+static void denali_select_target(struct nand_chip *chip, int cs)
 {
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct denali_chip_sel *sel = &to_denali_chip(chip)->sels[cs];
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
-	int i;
 
-	for (i = 0; i < len; i++)
-		buf[i] = denali->host_read(denali, addr);
+	denali->active_bank = sel->bank;
+
+	iowrite32(1 << (chip->phys_erase_shift - chip->page_shift),
+		  denali->reg + PAGES_PER_BLOCK);
+	iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
+		  denali->reg + DEVICE_WIDTH);
+	iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
+	iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+	iowrite32(chip->options & NAND_ROW_ADDR_3 ?
+		  0 : TWO_ROW_ADDR_CYCLES__FLAG,
+		  denali->reg + TWO_ROW_ADDR_CYCLES);
+	iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+		  FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
+		  denali->reg + ECC_CORRECTION);
+	iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
+	iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
+	iowrite32(chip->ecc.steps, denali->reg + CFG_NUM_DATA_BLOCKS);
+
+	if (chip->options & NAND_KEEP_TIMINGS)
+		return;
+
+	/* update timing registers unless NAND_KEEP_TIMINGS is set */
+	iowrite32(sel->hwhr2_and_we_2_re, denali->reg + TWHR2_AND_WE_2_RE);
+	iowrite32(sel->tcwaw_and_addr_2_data,
+		  denali->reg + TCWAW_AND_ADDR_2_DATA);
+	iowrite32(sel->re_2_we, denali->reg + RE_2_WE);
+	iowrite32(sel->acc_clks, denali->reg + ACC_CLKS);
+	iowrite32(sel->rdwr_en_lo_cnt, denali->reg + RDWR_EN_LO_CNT);
+	iowrite32(sel->rdwr_en_hi_cnt, denali->reg + RDWR_EN_HI_CNT);
+	iowrite32(sel->cs_setup_cnt, denali->reg + CS_SETUP_CNT);
+	iowrite32(sel->re_2_re, denali->reg + RE_2_RE);
 }
 
-static void denali_write_buf(struct nand_chip *chip, const uint8_t *buf,
-			     int len)
+static int denali_change_column(struct nand_chip *chip, unsigned int offset,
+				void *buf, unsigned int len, bool write)
 {
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
-	int i;
-
-	for (i = 0; i < len; i++)
-		denali->host_write(denali, addr, buf[i]);
+	if (write)
+		return nand_change_write_column_op(chip, offset, buf, len,
+						   false);
+	else
+		return nand_change_read_column_op(chip, offset, buf, len,
+						  false);
 }
 
-static void denali_read_buf16(struct nand_chip *chip, uint8_t *buf, int len)
+static int denali_payload_xfer(struct nand_chip *chip, void *buf, bool write)
 {
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
-	uint16_t *buf16 = (uint16_t *)buf;
-	int i;
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int writesize = mtd->writesize;
+	int oob_skip = denali->oob_skip_bytes;
+	int ret, i, pos, len;
+
+	for (i = 0; i < ecc->steps; i++) {
+		pos = i * (ecc->size + ecc->bytes);
+		len = ecc->size;
+
+		if (pos >= writesize) {
+			pos += oob_skip;
+		} else if (pos + len > writesize) {
+			/* This chunk overwraps the BBM area. Must be split */
+			ret = denali_change_column(chip, pos, buf,
+						   writesize - pos, write);
+			if (ret)
+				return ret;
+
+			buf += writesize - pos;
+			len -= writesize - pos;
+			pos = writesize + oob_skip;
+		}
+
+		ret = denali_change_column(chip, pos, buf, len, write);
+		if (ret)
+			return ret;
 
-	for (i = 0; i < len / 2; i++)
-		buf16[i] = denali->host_read(denali, addr);
+		buf += len;
+	}
+
+	return 0;
 }
 
-static void denali_write_buf16(struct nand_chip *chip, const uint8_t *buf,
-			       int len)
+static int denali_oob_xfer(struct nand_chip *chip, void *buf, bool write)
 {
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
-	const uint16_t *buf16 = (const uint16_t *)buf;
-	int i;
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int writesize = mtd->writesize;
+	int oobsize = mtd->oobsize;
+	int oob_skip = denali->oob_skip_bytes;
+	int ret, i, pos, len;
 
-	for (i = 0; i < len / 2; i++)
-		denali->host_write(denali, addr, buf16[i]);
+	/* BBM at the beginning of the OOB area */
+	ret = denali_change_column(chip, writesize, buf, oob_skip, write);
+	if (ret)
+		return ret;
+
+	buf += oob_skip;
+
+	for (i = 0; i < ecc->steps; i++) {
+		pos = ecc->size + i * (ecc->size + ecc->bytes);
+
+		if (i == ecc->steps - 1)
+			/* The last chunk includes OOB free */
+			len = writesize + oobsize - pos - oob_skip;
+		else
+			len = ecc->bytes;
+
+		if (pos >= writesize) {
+			pos += oob_skip;
+		} else if (pos + len > writesize) {
+			/* This chunk overwraps the BBM area. Must be split */
+			ret = denali_change_column(chip, pos, buf,
+						   writesize - pos, write);
+			if (ret)
+				return ret;
+
+			buf += writesize - pos;
+			len -= writesize - pos;
+			pos = writesize + oob_skip;
+		}
+
+		ret = denali_change_column(chip, pos, buf, len, write);
+		if (ret)
+			return ret;
+
+		buf += len;
+	}
+
+	return 0;
 }
 
-static uint8_t denali_read_byte(struct nand_chip *chip)
+static int denali_read_raw(struct nand_chip *chip, void *buf, void *oob_buf,
+			   int page)
 {
-	uint8_t byte;
+	int ret;
+
+	if (!buf && !oob_buf)
+		return -EINVAL;
 
-	denali_read_buf(chip, &byte, 1);
+	ret = nand_read_page_op(chip, page, 0, NULL, 0);
+	if (ret)
+		return ret;
 
-	return byte;
+	if (buf) {
+		ret = denali_payload_xfer(chip, buf, false);
+		if (ret)
+			return ret;
+	}
+
+	if (oob_buf) {
+		ret = denali_oob_xfer(chip, oob_buf, false);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
-static void denali_write_byte(struct nand_chip *chip, uint8_t byte)
+static int denali_write_raw(struct nand_chip *chip, const void *buf,
+			    const void *oob_buf, int page)
 {
-	denali_write_buf(chip, &byte, 1);
+	int ret;
+
+	if (!buf && !oob_buf)
+		return -EINVAL;
+
+	ret = nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+	if (ret)
+		return ret;
+
+	if (buf) {
+		ret = denali_payload_xfer(chip, (void *)buf, true);
+		if (ret)
+			return ret;
+	}
+
+	if (oob_buf) {
+		ret = denali_oob_xfer(chip, (void *)oob_buf, true);
+		if (ret)
+			return ret;
+	}
+
+	return nand_prog_page_end_op(chip);
 }
 
-static void denali_cmd_ctrl(struct nand_chip *chip, int dat, unsigned int ctrl)
+static int denali_read_page_raw(struct nand_chip *chip, u8 *buf,
+				int oob_required, int page)
 {
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	uint32_t type;
+	return denali_read_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+			       page);
+}
 
-	if (ctrl & NAND_CLE)
-		type = DENALI_MAP11_CMD;
-	else if (ctrl & NAND_ALE)
-		type = DENALI_MAP11_ADDR;
-	else
-		return;
+static int denali_write_page_raw(struct nand_chip *chip, const u8 *buf,
+				 int oob_required, int page)
+{
+	return denali_write_raw(chip, buf, oob_required ? chip->oob_poi : NULL,
+				page);
+}
 
-	/*
-	 * Some commands are followed by chip->legacy.waitfunc.
-	 * irq_status must be cleared here to catch the R/B# interrupt later.
-	 */
-	if (ctrl & NAND_CTRL_CHANGE)
-		denali_reset_irq(denali);
+static int denali_read_oob(struct nand_chip *chip, int page)
+{
+	return denali_read_raw(chip, NULL, chip->oob_poi, page);
+}
 
-	denali->host_write(denali, DENALI_BANK(denali) | type, dat);
+static int denali_write_oob(struct nand_chip *chip, int page)
+{
+	return denali_write_raw(chip, NULL, chip->oob_poi, page);
 }
 
-static int denali_check_erased_page(struct mtd_info *mtd,
-				    struct nand_chip *chip, uint8_t *buf,
+static int denali_check_erased_page(struct nand_chip *chip, u8 *buf,
 				    unsigned long uncor_ecc_flags,
 				    unsigned int max_bitflips)
 {
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	uint8_t *ecc_code = chip->oob_poi + denali->oob_skip_bytes;
-	int ecc_steps = chip->ecc.steps;
-	int ecc_size = chip->ecc.size;
-	int ecc_bytes = chip->ecc.bytes;
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	u8 *ecc_code = chip->oob_poi + denali->oob_skip_bytes;
 	int i, stat;
 
-	for (i = 0; i < ecc_steps; i++) {
+	for (i = 0; i < ecc->steps; i++) {
 		if (!(uncor_ecc_flags & BIT(i)))
 			continue;
 
-		stat = nand_check_erased_ecc_chunk(buf, ecc_size,
-						  ecc_code, ecc_bytes,
-						  NULL, 0,
-						  chip->ecc.strength);
+		stat = nand_check_erased_ecc_chunk(buf, ecc->size, ecc_code,
+						   ecc->bytes, NULL, 0,
+						   ecc->strength);
 		if (stat < 0) {
-			mtd->ecc_stats.failed++;
+			ecc_stats->failed++;
 		} else {
-			mtd->ecc_stats.corrected += stat;
+			ecc_stats->corrected += stat;
 			max_bitflips = max_t(unsigned int, max_bitflips, stat);
 		}
 
-		buf += ecc_size;
-		ecc_code += ecc_bytes;
+		buf += ecc->size;
+		ecc_code += ecc->bytes;
 	}
 
 	return max_bitflips;
 }
 
-static int denali_hw_ecc_fixup(struct mtd_info *mtd,
-			       struct denali_nand_info *denali,
+static int denali_hw_ecc_fixup(struct nand_chip *chip,
 			       unsigned long *uncor_ecc_flags)
 {
-	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
 	int bank = denali->active_bank;
-	uint32_t ecc_cor;
+	u32 ecc_cor;
 	unsigned int max_bitflips;
 
 	ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank));
@@ -346,23 +466,24 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
 	 * Unfortunately, we can not know the total number of corrected bits in
 	 * the page.  Increase the stats by max_bitflips. (compromised solution)
 	 */
-	mtd->ecc_stats.corrected += max_bitflips;
+	ecc_stats->corrected += max_bitflips;
 
 	return max_bitflips;
 }
 
-static int denali_sw_ecc_fixup(struct mtd_info *mtd,
-			       struct denali_nand_info *denali,
-			       unsigned long *uncor_ecc_flags, uint8_t *buf)
+static int denali_sw_ecc_fixup(struct nand_chip *chip,
+			       unsigned long *uncor_ecc_flags, u8 *buf)
 {
-	unsigned int ecc_size = denali->nand.ecc.size;
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct mtd_ecc_stats *ecc_stats = &nand_to_mtd(chip)->ecc_stats;
+	unsigned int ecc_size = chip->ecc.size;
 	unsigned int bitflips = 0;
 	unsigned int max_bitflips = 0;
-	uint32_t err_addr, err_cor_info;
+	u32 err_addr, err_cor_info;
 	unsigned int err_byte, err_sector, err_device;
-	uint8_t err_cor_value;
+	u8 err_cor_value;
 	unsigned int prev_sector = 0;
-	uint32_t irq_status;
+	u32 irq_status;
 
 	denali_reset_irq(denali);
 
@@ -404,7 +525,7 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 			/* correct the ECC error */
 			flips_in_byte = hweight8(buf[offset] ^ err_cor_value);
 			buf[offset] ^= err_cor_value;
-			mtd->ecc_stats.corrected += flips_in_byte;
+			ecc_stats->corrected += flips_in_byte;
 			bitflips += flips_in_byte;
 
 			max_bitflips = max(max_bitflips, bitflips);
@@ -424,10 +545,10 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
 	return max_bitflips;
 }
 
-static void denali_setup_dma64(struct denali_nand_info *denali,
-			       dma_addr_t dma_addr, int page, int write)
+static void denali_setup_dma64(struct denali_controller *denali,
+			       dma_addr_t dma_addr, int page, bool write)
 {
-	uint32_t mode;
+	u32 mode;
 	const int page_count = 1;
 
 	mode = DENALI_MAP10 | DENALI_BANK(denali) | page;
@@ -439,7 +560,8 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
 	 *    burst len = 64 bytes, the number of pages
 	 */
 	denali->host_write(denali, mode,
-			   0x01002000 | (64 << 16) | (write << 8) | page_count);
+			   0x01002000 | (64 << 16) |
+			   (write ? BIT(8) : 0) | page_count);
 
 	/* 2. set memory low address */
 	denali->host_write(denali, mode, lower_32_bits(dma_addr));
@@ -448,10 +570,10 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
 	denali->host_write(denali, mode, upper_32_bits(dma_addr));
 }
 
-static void denali_setup_dma32(struct denali_nand_info *denali,
-			       dma_addr_t dma_addr, int page, int write)
+static void denali_setup_dma32(struct denali_controller *denali,
+			       dma_addr_t dma_addr, int page, bool write)
 {
-	uint32_t mode;
+	u32 mode;
 	const int page_count = 1;
 
 	mode = DENALI_MAP10 | DENALI_BANK(denali);
@@ -460,7 +582,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 
 	/* 1. setup transfer type and # of pages */
 	denali->host_write(denali, mode | page,
-			   0x2000 | (write << 8) | page_count);
+			   0x2000 | (write ? BIT(8) : 0) | page_count);
 
 	/* 2. set memory high address bits 23:8 */
 	denali->host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
@@ -472,12 +594,11 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 	denali->host_write(denali, mode | 0x14000, 0x2400);
 }
 
-static int denali_pio_read(struct denali_nand_info *denali, void *buf,
+static int denali_pio_read(struct denali_controller *denali, u32 *buf,
 			   size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
-	uint32_t *buf32 = (uint32_t *)buf;
-	uint32_t irq_status, ecc_err_mask;
+	u32 irq_status, ecc_err_mask;
 	int i;
 
 	if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
@@ -488,7 +609,7 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 	denali_reset_irq(denali);
 
 	for (i = 0; i < size / 4; i++)
-		*buf32++ = denali->host_read(denali, addr);
+		buf[i] = denali->host_read(denali, addr);
 
 	irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
 	if (!(irq_status & INTR__PAGE_XFER_INC))
@@ -500,29 +621,29 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 	return irq_status & ecc_err_mask ? -EBADMSG : 0;
 }
 
-static int denali_pio_write(struct denali_nand_info *denali,
-			    const void *buf, size_t size, int page)
+static int denali_pio_write(struct denali_controller *denali, const u32 *buf,
+			    size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
-	const uint32_t *buf32 = (uint32_t *)buf;
-	uint32_t irq_status;
+	u32 irq_status;
 	int i;
 
 	denali_reset_irq(denali);
 
 	for (i = 0; i < size / 4; i++)
-		denali->host_write(denali, addr, *buf32++);
+		denali->host_write(denali, addr, buf[i]);
 
 	irq_status = denali_wait_for_irq(denali,
-				INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
+					 INTR__PROGRAM_COMP |
+					 INTR__PROGRAM_FAIL);
 	if (!(irq_status & INTR__PROGRAM_COMP))
 		return -EIO;
 
 	return 0;
 }
 
-static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int write)
+static int denali_pio_xfer(struct denali_controller *denali, void *buf,
+			   size_t size, int page, bool write)
 {
 	if (write)
 		return denali_pio_write(denali, buf, size, page);
@@ -530,11 +651,11 @@ static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
 		return denali_pio_read(denali, buf, size, page);
 }
 
-static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int write)
+static int denali_dma_xfer(struct denali_controller *denali, void *buf,
+			   size_t size, int page, bool write)
 {
 	dma_addr_t dma_addr;
-	uint32_t irq_mask, irq_status, ecc_err_mask;
+	u32 irq_mask, irq_status, ecc_err_mask;
 	enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 	int ret = 0;
 
@@ -587,12 +708,12 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 	return ret;
 }
 
-static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
-			    size_t size, int page, int raw, int write)
+static int denali_page_xfer(struct nand_chip *chip, void *buf, size_t size,
+			    int page, bool write)
 {
-	iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
-	iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0,
-		  denali->reg + TRANSFER_SPARE_REG);
+	struct denali_controller *denali = to_denali_controller(chip);
+
+	denali_select_target(chip, chip->cur_cs);
 
 	if (denali->dma_avail)
 		return denali_dma_xfer(denali, buf, size, page, write);
@@ -600,180 +721,23 @@ static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
 		return denali_pio_xfer(denali, buf, size, page, write);
 }
 
-static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
-			    int page, int write)
-{
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	int writesize = mtd->writesize;
-	int oobsize = mtd->oobsize;
-	uint8_t *bufpoi = chip->oob_poi;
-	int ecc_steps = chip->ecc.steps;
-	int ecc_size = chip->ecc.size;
-	int ecc_bytes = chip->ecc.bytes;
-	int oob_skip = denali->oob_skip_bytes;
-	size_t size = writesize + oobsize;
-	int i, pos, len;
-
-	/* BBM at the beginning of the OOB area */
-	if (write)
-		nand_prog_page_begin_op(chip, page, writesize, bufpoi,
-					oob_skip);
-	else
-		nand_read_page_op(chip, page, writesize, bufpoi, oob_skip);
-	bufpoi += oob_skip;
-
-	/* OOB ECC */
-	for (i = 0; i < ecc_steps; i++) {
-		pos = ecc_size + i * (ecc_size + ecc_bytes);
-		len = ecc_bytes;
-
-		if (pos >= writesize)
-			pos += oob_skip;
-		else if (pos + len > writesize)
-			len = writesize - pos;
-
-		if (write)
-			nand_change_write_column_op(chip, pos, bufpoi, len,
-						    false);
-		else
-			nand_change_read_column_op(chip, pos, bufpoi, len,
-						   false);
-		bufpoi += len;
-		if (len < ecc_bytes) {
-			len = ecc_bytes - len;
-			if (write)
-				nand_change_write_column_op(chip, writesize +
-							    oob_skip, bufpoi,
-							    len, false);
-			else
-				nand_change_read_column_op(chip, writesize +
-							   oob_skip, bufpoi,
-							   len, false);
-			bufpoi += len;
-		}
-	}
-
-	/* OOB free */
-	len = oobsize - (bufpoi - chip->oob_poi);
-	if (write)
-		nand_change_write_column_op(chip, size - len, bufpoi, len,
-					    false);
-	else
-		nand_change_read_column_op(chip, size - len, bufpoi, len,
-					   false);
-}
-
-static int denali_read_page_raw(struct nand_chip *chip, uint8_t *buf,
-				int oob_required, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	int writesize = mtd->writesize;
-	int oobsize = mtd->oobsize;
-	int ecc_steps = chip->ecc.steps;
-	int ecc_size = chip->ecc.size;
-	int ecc_bytes = chip->ecc.bytes;
-	void *tmp_buf = denali->buf;
-	int oob_skip = denali->oob_skip_bytes;
-	size_t size = writesize + oobsize;
-	int ret, i, pos, len;
-
-	ret = denali_data_xfer(denali, tmp_buf, size, page, 1, 0);
-	if (ret)
-		return ret;
-
-	/* Arrange the buffer for syndrome payload/ecc layout */
-	if (buf) {
-		for (i = 0; i < ecc_steps; i++) {
-			pos = i * (ecc_size + ecc_bytes);
-			len = ecc_size;
-
-			if (pos >= writesize)
-				pos += oob_skip;
-			else if (pos + len > writesize)
-				len = writesize - pos;
-
-			memcpy(buf, tmp_buf + pos, len);
-			buf += len;
-			if (len < ecc_size) {
-				len = ecc_size - len;
-				memcpy(buf, tmp_buf + writesize + oob_skip,
-				       len);
-				buf += len;
-			}
-		}
-	}
-
-	if (oob_required) {
-		uint8_t *oob = chip->oob_poi;
-
-		/* BBM at the beginning of the OOB area */
-		memcpy(oob, tmp_buf + writesize, oob_skip);
-		oob += oob_skip;
-
-		/* OOB ECC */
-		for (i = 0; i < ecc_steps; i++) {
-			pos = ecc_size + i * (ecc_size + ecc_bytes);
-			len = ecc_bytes;
-
-			if (pos >= writesize)
-				pos += oob_skip;
-			else if (pos + len > writesize)
-				len = writesize - pos;
-
-			memcpy(oob, tmp_buf + pos, len);
-			oob += len;
-			if (len < ecc_bytes) {
-				len = ecc_bytes - len;
-				memcpy(oob, tmp_buf + writesize + oob_skip,
-				       len);
-				oob += len;
-			}
-		}
-
-		/* OOB free */
-		len = oobsize - (oob - chip->oob_poi);
-		memcpy(oob, tmp_buf + size - len, len);
-	}
-
-	return 0;
-}
-
-static int denali_read_oob(struct nand_chip *chip, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-
-	denali_oob_xfer(mtd, chip, page, 0);
-
-	return 0;
-}
-
-static int denali_write_oob(struct nand_chip *chip, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-
-	denali_oob_xfer(mtd, chip, page, 1);
-
-	return nand_prog_page_end_op(chip);
-}
-
-static int denali_read_page(struct nand_chip *chip, uint8_t *buf,
+static int denali_read_page(struct nand_chip *chip, u8 *buf,
 			    int oob_required, int page)
 {
+	struct denali_controller *denali = to_denali_controller(chip);
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	unsigned long uncor_ecc_flags = 0;
 	int stat = 0;
 	int ret;
 
-	ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0);
+	ret = denali_page_xfer(chip, buf, mtd->writesize, page, false);
 	if (ret && ret != -EBADMSG)
 		return ret;
 
 	if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
-		stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags);
+		stat = denali_hw_ecc_fixup(chip, &uncor_ecc_flags);
 	else if (ret == -EBADMSG)
-		stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf);
+		stat = denali_sw_ecc_fixup(chip, &uncor_ecc_flags, buf);
 
 	if (stat < 0)
 		return stat;
@@ -783,130 +747,32 @@ static int denali_read_page(struct nand_chip *chip, uint8_t *buf,
 		if (ret)
 			return ret;
 
-		stat = denali_check_erased_page(mtd, chip, buf,
+		stat = denali_check_erased_page(chip, buf,
 						uncor_ecc_flags, stat);
 	}
 
 	return stat;
 }
 
-static int denali_write_page_raw(struct nand_chip *chip, const uint8_t *buf,
-				 int oob_required, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	int writesize = mtd->writesize;
-	int oobsize = mtd->oobsize;
-	int ecc_steps = chip->ecc.steps;
-	int ecc_size = chip->ecc.size;
-	int ecc_bytes = chip->ecc.bytes;
-	void *tmp_buf = denali->buf;
-	int oob_skip = denali->oob_skip_bytes;
-	size_t size = writesize + oobsize;
-	int i, pos, len;
-
-	/*
-	 * Fill the buffer with 0xff first except the full page transfer.
-	 * This simplifies the logic.
-	 */
-	if (!buf || !oob_required)
-		memset(tmp_buf, 0xff, size);
-
-	/* Arrange the buffer for syndrome payload/ecc layout */
-	if (buf) {
-		for (i = 0; i < ecc_steps; i++) {
-			pos = i * (ecc_size + ecc_bytes);
-			len = ecc_size;
-
-			if (pos >= writesize)
-				pos += oob_skip;
-			else if (pos + len > writesize)
-				len = writesize - pos;
-
-			memcpy(tmp_buf + pos, buf, len);
-			buf += len;
-			if (len < ecc_size) {
-				len = ecc_size - len;
-				memcpy(tmp_buf + writesize + oob_skip, buf,
-				       len);
-				buf += len;
-			}
-		}
-	}
-
-	if (oob_required) {
-		const uint8_t *oob = chip->oob_poi;
-
-		/* BBM at the beginning of the OOB area */
-		memcpy(tmp_buf + writesize, oob, oob_skip);
-		oob += oob_skip;
-
-		/* OOB ECC */
-		for (i = 0; i < ecc_steps; i++) {
-			pos = ecc_size + i * (ecc_size + ecc_bytes);
-			len = ecc_bytes;
-
-			if (pos >= writesize)
-				pos += oob_skip;
-			else if (pos + len > writesize)
-				len = writesize - pos;
-
-			memcpy(tmp_buf + pos, oob, len);
-			oob += len;
-			if (len < ecc_bytes) {
-				len = ecc_bytes - len;
-				memcpy(tmp_buf + writesize + oob_skip, oob,
-				       len);
-				oob += len;
-			}
-		}
-
-		/* OOB free */
-		len = oobsize - (oob - chip->oob_poi);
-		memcpy(tmp_buf + size - len, oob, len);
-	}
-
-	return denali_data_xfer(denali, tmp_buf, size, page, 1, 1);
-}
-
-static int denali_write_page(struct nand_chip *chip, const uint8_t *buf,
+static int denali_write_page(struct nand_chip *chip, const u8 *buf,
 			     int oob_required, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
 
-	return denali_data_xfer(denali, (void *)buf, mtd->writesize,
-				page, 0, 1);
-}
-
-static void denali_select_chip(struct nand_chip *chip, int cs)
-{
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-
-	denali->active_bank = cs;
-}
-
-static int denali_waitfunc(struct nand_chip *chip)
-{
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	uint32_t irq_status;
-
-	/* R/B# pin transitioned from low to high? */
-	irq_status = denali_wait_for_irq(denali, INTR__INT_ACT);
-
-	return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
+	return denali_page_xfer(chip, (void *)buf, mtd->writesize, page, true);
 }
 
 static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 				       const struct nand_data_interface *conf)
 {
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
+	struct denali_controller *denali = to_denali_controller(chip);
+	struct denali_chip_sel *sel;
 	const struct nand_sdr_timings *timings;
 	unsigned long t_x, mult_x;
 	int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
 	int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
 	int addr_2_data_mask;
-	uint32_t tmp;
+	u32 tmp;
 
 	timings = nand_get_sdr_timings(conf);
 	if (IS_ERR(timings))
@@ -929,6 +795,8 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
 		return 0;
 
+	sel = &to_denali_chip(chip)->sels[chipnr];
+
 	/* tREA -> ACC_CLKS */
 	acc_clks = DIV_ROUND_UP(timings->tREA_max, t_x);
 	acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
@@ -936,7 +804,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + ACC_CLKS);
 	tmp &= ~ACC_CLKS__VALUE;
 	tmp |= FIELD_PREP(ACC_CLKS__VALUE, acc_clks);
-	iowrite32(tmp, denali->reg + ACC_CLKS);
+	sel->acc_clks = tmp;
 
 	/* tRWH -> RE_2_WE */
 	re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_x);
@@ -945,7 +813,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + RE_2_WE);
 	tmp &= ~RE_2_WE__VALUE;
 	tmp |= FIELD_PREP(RE_2_WE__VALUE, re_2_we);
-	iowrite32(tmp, denali->reg + RE_2_WE);
+	sel->re_2_we = tmp;
 
 	/* tRHZ -> RE_2_RE */
 	re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_x);
@@ -954,7 +822,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + RE_2_RE);
 	tmp &= ~RE_2_RE__VALUE;
 	tmp |= FIELD_PREP(RE_2_RE__VALUE, re_2_re);
-	iowrite32(tmp, denali->reg + RE_2_RE);
+	sel->re_2_re = tmp;
 
 	/*
 	 * tCCS, tWHR -> WE_2_RE
@@ -968,7 +836,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
 	tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
 	tmp |= FIELD_PREP(TWHR2_AND_WE_2_RE__WE_2_RE, we_2_re);
-	iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
+	sel->hwhr2_and_we_2_re = tmp;
 
 	/* tADL -> ADDR_2_DATA */
 
@@ -983,7 +851,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
 	tmp &= ~TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
 	tmp |= FIELD_PREP(TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA, addr_2_data);
-	iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
+	sel->tcwaw_and_addr_2_data = tmp;
 
 	/* tREH, tWH -> RDWR_EN_HI_CNT */
 	rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
@@ -993,7 +861,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
 	tmp &= ~RDWR_EN_HI_CNT__VALUE;
 	tmp |= FIELD_PREP(RDWR_EN_HI_CNT__VALUE, rdwr_en_hi);
-	iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
+	sel->rdwr_en_hi_cnt = tmp;
 
 	/* tRP, tWP -> RDWR_EN_LO_CNT */
 	rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), t_x);
@@ -1006,7 +874,7 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
 	tmp &= ~RDWR_EN_LO_CNT__VALUE;
 	tmp |= FIELD_PREP(RDWR_EN_LO_CNT__VALUE, rdwr_en_lo);
-	iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
+	sel->rdwr_en_lo_cnt = tmp;
 
 	/* tCS, tCEA -> CS_SETUP_CNT */
 	cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_x) - rdwr_en_lo,
@@ -1017,39 +885,11 @@ static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 	tmp = ioread32(denali->reg + CS_SETUP_CNT);
 	tmp &= ~CS_SETUP_CNT__VALUE;
 	tmp |= FIELD_PREP(CS_SETUP_CNT__VALUE, cs_setup);
-	iowrite32(tmp, denali->reg + CS_SETUP_CNT);
+	sel->cs_setup_cnt = tmp;
 
 	return 0;
 }
 
-static void denali_hw_init(struct denali_nand_info *denali)
-{
-	/*
-	 * The REVISION register may not be reliable.  Platforms are allowed to
-	 * override it.
-	 */
-	if (!denali->revision)
-		denali->revision = swab16(ioread32(denali->reg + REVISION));
-
-	/*
-	 * Set how many bytes should be skipped before writing data in OOB.
-	 * If a non-zero value has already been set (by firmware or something),
-	 * just use it.  Otherwise, set the driver default.
-	 */
-	denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
-	if (!denali->oob_skip_bytes) {
-		denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES;
-		iowrite32(denali->oob_skip_bytes,
-			  denali->reg + SPARE_AREA_SKIP_BYTES);
-	}
-
-	denali_detect_max_banks(denali);
-	iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
-	iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
-
-	iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
-}
-
 int denali_calc_ecc_bytes(int step_size, int strength)
 {
 	/* BCH code.  Denali requires ecc.bytes to be multiple of 2 */
@@ -1060,10 +900,10 @@ EXPORT_SYMBOL(denali_calc_ecc_bytes);
 static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
 				struct mtd_oob_region *oobregion)
 {
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct denali_controller *denali = to_denali_controller(chip);
 
-	if (section)
+	if (section > 0)
 		return -ERANGE;
 
 	oobregion->offset = denali->oob_skip_bytes;
@@ -1075,10 +915,10 @@ static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
 static int denali_ooblayout_free(struct mtd_info *mtd, int section,
 				 struct mtd_oob_region *oobregion)
 {
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct denali_controller *denali = to_denali_controller(chip);
 
-	if (section)
+	if (section > 0)
 		return -ERANGE;
 
 	oobregion->offset = chip->ecc.total + denali->oob_skip_bytes;
@@ -1092,10 +932,13 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
 	.free = denali_ooblayout_free,
 };
 
-static int denali_multidev_fixup(struct denali_nand_info *denali)
+static int denali_multidev_fixup(struct nand_chip *chip)
 {
-	struct nand_chip *chip = &denali->nand;
+	struct denali_controller *denali = to_denali_controller(chip);
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+
+	memorg = nanddev_get_memorg(&chip->base);
 
 	/*
 	 * Support for multi device:
@@ -1125,11 +968,12 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
 	}
 
 	/* 2 chips in parallel */
+	memorg->pagesize <<= 1;
+	memorg->oobsize <<= 1;
 	mtd->size <<= 1;
 	mtd->erasesize <<= 1;
 	mtd->writesize <<= 1;
 	mtd->oobsize <<= 1;
-	chip->chipsize <<= 1;
 	chip->page_shift += 1;
 	chip->phys_erase_shift += 1;
 	chip->bbt_erase_shift += 1;
@@ -1145,38 +989,10 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
 
 static int denali_attach_chip(struct nand_chip *chip)
 {
+	struct denali_controller *denali = to_denali_controller(chip);
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	int ret;
 
-	if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
-		denali->dma_avail = 1;
-
-	if (denali->dma_avail) {
-		int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
-
-		ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
-		if (ret) {
-			dev_info(denali->dev,
-				 "Failed to set DMA mask. Disabling DMA.\n");
-			denali->dma_avail = 0;
-		}
-	}
-
-	if (denali->dma_avail) {
-		chip->options |= NAND_USE_BOUNCE_BUFFER;
-		chip->buf_align = 16;
-		if (denali->caps & DENALI_CAP_DMA_64BIT)
-			denali->setup_dma = denali_setup_dma64;
-		else
-			denali->setup_dma = denali_setup_dma32;
-	}
-
-	chip->bbt_options |= NAND_BBT_USE_FLASH;
-	chip->bbt_options |= NAND_BBT_NO_OOB;
-	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-	chip->options |= NAND_NO_SUBPAGE_WRITE;
-
 	ret = nand_ecc_choose_conf(chip, denali->ecc_caps,
 				   mtd->oobsize - denali->oob_skip_bytes);
 	if (ret) {
@@ -1188,123 +1004,230 @@ static int denali_attach_chip(struct nand_chip *chip)
 		"chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
 		chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
 
-	iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
-		  FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
-		  denali->reg + ECC_CORRECTION);
-	iowrite32(mtd->erasesize / mtd->writesize,
-		  denali->reg + PAGES_PER_BLOCK);
-	iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
-		  denali->reg + DEVICE_WIDTH);
-	iowrite32(chip->options & NAND_ROW_ADDR_3 ? 0 : TWO_ROW_ADDR_CYCLES__FLAG,
-		  denali->reg + TWO_ROW_ADDR_CYCLES);
-	iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
-	iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+	ret = denali_multidev_fixup(chip);
+	if (ret)
+		return ret;
 
-	iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
-	iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
-	/* chip->ecc.steps is set by nand_scan_tail(); not available here */
-	iowrite32(mtd->writesize / chip->ecc.size,
-		  denali->reg + CFG_NUM_DATA_BLOCKS);
+	return 0;
+}
 
-	mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+static void denali_exec_in8(struct denali_controller *denali, u32 type,
+			    u8 *buf, unsigned int len)
+{
+	int i;
 
-	if (chip->options & NAND_BUSWIDTH_16) {
-		chip->legacy.read_buf = denali_read_buf16;
-		chip->legacy.write_buf = denali_write_buf16;
-	} else {
-		chip->legacy.read_buf = denali_read_buf;
-		chip->legacy.write_buf = denali_write_buf;
+	for (i = 0; i < len; i++)
+		buf[i] = denali->host_read(denali, type | DENALI_BANK(denali));
+}
+
+static void denali_exec_in16(struct denali_controller *denali, u32 type,
+			     u8 *buf, unsigned int len)
+{
+	u32 data;
+	int i;
+
+	for (i = 0; i < len; i += 2) {
+		data = denali->host_read(denali, type | DENALI_BANK(denali));
+		/* bit 31:24 and 15:8 are used for DDR */
+		buf[i] = data;
+		buf[i + 1] = data >> 16;
 	}
-	chip->ecc.read_page = denali_read_page;
-	chip->ecc.read_page_raw = denali_read_page_raw;
-	chip->ecc.write_page = denali_write_page;
-	chip->ecc.write_page_raw = denali_write_page_raw;
-	chip->ecc.read_oob = denali_read_oob;
-	chip->ecc.write_oob = denali_write_oob;
+}
 
-	ret = denali_multidev_fixup(denali);
-	if (ret)
-		return ret;
+static void denali_exec_in(struct denali_controller *denali, u32 type,
+			   u8 *buf, unsigned int len, bool width16)
+{
+	if (width16)
+		denali_exec_in16(denali, type, buf, len);
+	else
+		denali_exec_in8(denali, type, buf, len);
+}
 
-	/*
-	 * This buffer is DMA-mapped by denali_{read,write}_page_raw.  Do not
-	 * use devm_kmalloc() because the memory allocated by devm_ does not
-	 * guarantee DMA-safe alignment.
-	 */
-	denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
-	if (!denali->buf)
-		return -ENOMEM;
+static void denali_exec_out8(struct denali_controller *denali, u32 type,
+			     const u8 *buf, unsigned int len)
+{
+	int i;
 
-	return 0;
+	for (i = 0; i < len; i++)
+		denali->host_write(denali, type | DENALI_BANK(denali), buf[i]);
 }
 
-static void denali_detach_chip(struct nand_chip *chip)
+static void denali_exec_out16(struct denali_controller *denali, u32 type,
+			      const u8 *buf, unsigned int len)
 {
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	int i;
+
+	for (i = 0; i < len; i += 2)
+		denali->host_write(denali, type | DENALI_BANK(denali),
+				   buf[i + 1] << 16 | buf[i]);
+}
 
-	kfree(denali->buf);
+static void denali_exec_out(struct denali_controller *denali, u32 type,
+			    const u8 *buf, unsigned int len, bool width16)
+{
+	if (width16)
+		denali_exec_out16(denali, type, buf, len);
+	else
+		denali_exec_out8(denali, type, buf, len);
+}
+
+static int denali_exec_waitrdy(struct denali_controller *denali)
+{
+	u32 irq_stat;
+
+	/* R/B# pin transitioned from low to high? */
+	irq_stat = denali_wait_for_irq(denali, INTR__INT_ACT);
+
+	/* Just in case nand_operation has multiple NAND_OP_WAITRDY_INSTR. */
+	denali_reset_irq(denali);
+
+	return irq_stat & INTR__INT_ACT ? 0 : -EIO;
+}
+
+static int denali_exec_instr(struct nand_chip *chip,
+			     const struct nand_op_instr *instr)
+{
+	struct denali_controller *denali = to_denali_controller(chip);
+
+	switch (instr->type) {
+	case NAND_OP_CMD_INSTR:
+		denali_exec_out8(denali, DENALI_MAP11_CMD,
+				 &instr->ctx.cmd.opcode, 1);
+		return 0;
+	case NAND_OP_ADDR_INSTR:
+		denali_exec_out8(denali, DENALI_MAP11_ADDR,
+				 instr->ctx.addr.addrs,
+				 instr->ctx.addr.naddrs);
+		return 0;
+	case NAND_OP_DATA_IN_INSTR:
+		denali_exec_in(denali, DENALI_MAP11_DATA,
+			       instr->ctx.data.buf.in,
+			       instr->ctx.data.len,
+			       !instr->ctx.data.force_8bit &&
+			       chip->options & NAND_BUSWIDTH_16);
+		return 0;
+	case NAND_OP_DATA_OUT_INSTR:
+		denali_exec_out(denali, DENALI_MAP11_DATA,
+				instr->ctx.data.buf.out,
+				instr->ctx.data.len,
+				!instr->ctx.data.force_8bit &&
+				chip->options & NAND_BUSWIDTH_16);
+		return 0;
+	case NAND_OP_WAITRDY_INSTR:
+		return denali_exec_waitrdy(denali);
+	default:
+		WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
+			  instr->type);
+
+		return -EINVAL;
+	}
+}
+
+static int denali_exec_op(struct nand_chip *chip,
+			  const struct nand_operation *op, bool check_only)
+{
+	int i, ret;
+
+	if (check_only)
+		return 0;
+
+	denali_select_target(chip, op->cs);
+
+	/*
+	 * Some commands contain NAND_OP_WAITRDY_INSTR.
+	 * irq must be cleared here to catch the R/B# interrupt there.
+	 */
+	denali_reset_irq(to_denali_controller(chip));
+
+	for (i = 0; i < op->ninstrs; i++) {
+		ret = denali_exec_instr(chip, &op->instrs[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static const struct nand_controller_ops denali_controller_ops = {
 	.attach_chip = denali_attach_chip,
-	.detach_chip = denali_detach_chip,
+	.exec_op = denali_exec_op,
 	.setup_data_interface = denali_setup_data_interface,
 };
 
-int denali_init(struct denali_nand_info *denali)
+int denali_chip_init(struct denali_controller *denali,
+		     struct denali_chip *dchip)
 {
-	struct nand_chip *chip = &denali->nand;
+	struct nand_chip *chip = &dchip->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	u32 features = ioread32(denali->reg + FEATURES);
-	int ret;
+	struct denali_chip *dchip2;
+	int i, j, ret;
 
-	mtd->dev.parent = denali->dev;
-	denali_hw_init(denali);
+	chip->controller = &denali->controller;
 
-	init_completion(&denali->complete);
-	spin_lock_init(&denali->irq_lock);
+	/* sanity checks for bank numbers */
+	for (i = 0; i < dchip->nsels; i++) {
+		unsigned int bank = dchip->sels[i].bank;
 
-	denali_clear_irq_all(denali);
+		if (bank >= denali->nbanks) {
+			dev_err(denali->dev, "unsupported bank %d\n", bank);
+			return -EINVAL;
+		}
 
-	ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
-			       IRQF_SHARED, DENALI_NAND_NAME, denali);
-	if (ret) {
-		dev_err(denali->dev, "Unable to request IRQ\n");
-		return ret;
-	}
+		for (j = 0; j < i; j++) {
+			if (bank == dchip->sels[j].bank) {
+				dev_err(denali->dev,
+					"bank %d is assigned twice in the same chip\n",
+					bank);
+				return -EINVAL;
+			}
+		}
 
-	denali_enable_irq(denali);
+		list_for_each_entry(dchip2, &denali->chips, node) {
+			for (j = 0; j < dchip2->nsels; j++) {
+				if (bank == dchip2->sels[j].bank) {
+					dev_err(denali->dev,
+						"bank %d is already used\n",
+						bank);
+					return -EINVAL;
+				}
+			}
+		}
+	}
 
-	denali->active_bank = DENALI_INVALID_BANK;
+	mtd->dev.parent = denali->dev;
 
-	nand_set_flash_node(chip, denali->dev->of_node);
-	/* Fallback to the default name if DT did not give "label" property */
-	if (!mtd->name)
+	/*
+	 * Fallback to the default name if DT did not give "label" property.
+	 * Use "label" property if multiple chips are connected.
+	 */
+	if (!mtd->name && list_empty(&denali->chips))
 		mtd->name = "denali-nand";
 
-	chip->legacy.select_chip = denali_select_chip;
-	chip->legacy.read_byte = denali_read_byte;
-	chip->legacy.write_byte = denali_write_byte;
-	chip->legacy.cmd_ctrl = denali_cmd_ctrl;
-	chip->legacy.waitfunc = denali_waitfunc;
-
-	if (features & FEATURES__INDEX_ADDR) {
-		denali->host_read = denali_indexed_read;
-		denali->host_write = denali_indexed_write;
-	} else {
-		denali->host_read = denali_direct_read;
-		denali->host_write = denali_direct_write;
+	if (denali->dma_avail) {
+		chip->options |= NAND_USE_BOUNCE_BUFFER;
+		chip->buf_align = 16;
 	}
 
 	/* clk rate info is needed for setup_data_interface */
 	if (!denali->clk_rate || !denali->clk_x_rate)
 		chip->options |= NAND_KEEP_TIMINGS;
 
-	chip->legacy.dummy_controller.ops = &denali_controller_ops;
-	ret = nand_scan(chip, denali->max_banks);
+	chip->bbt_options |= NAND_BBT_USE_FLASH;
+	chip->bbt_options |= NAND_BBT_NO_OOB;
+	chip->options |= NAND_NO_SUBPAGE_WRITE;
+	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+	chip->ecc.read_page = denali_read_page;
+	chip->ecc.write_page = denali_write_page;
+	chip->ecc.read_page_raw = denali_read_page_raw;
+	chip->ecc.write_page_raw = denali_write_page_raw;
+	chip->ecc.read_oob = denali_read_oob;
+	chip->ecc.write_oob = denali_write_oob;
+
+	mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+
+	ret = nand_scan(chip, dchip->nsels);
 	if (ret)
-		goto disable_irq;
+		return ret;
 
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
@@ -1312,20 +1235,111 @@ int denali_init(struct denali_nand_info *denali)
 		goto cleanup_nand;
 	}
 
+	list_add_tail(&dchip->node, &denali->chips);
+
 	return 0;
 
 cleanup_nand:
 	nand_cleanup(chip);
-disable_irq:
-	denali_disable_irq(denali);
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(denali_chip_init);
+
+int denali_init(struct denali_controller *denali)
+{
+	u32 features = ioread32(denali->reg + FEATURES);
+	int ret;
+
+	nand_controller_init(&denali->controller);
+	denali->controller.ops = &denali_controller_ops;
+	init_completion(&denali->complete);
+	spin_lock_init(&denali->irq_lock);
+	INIT_LIST_HEAD(&denali->chips);
+	denali->active_bank = DENALI_INVALID_BANK;
+
+	/*
+	 * The REVISION register may not be reliable. Platforms are allowed to
+	 * override it.
+	 */
+	if (!denali->revision)
+		denali->revision = swab16(ioread32(denali->reg + REVISION));
+
+	denali->nbanks = 1 << FIELD_GET(FEATURES__N_BANKS, features);
+
+	/* the encoding changed from rev 5.0 to 5.1 */
+	if (denali->revision < 0x0501)
+		denali->nbanks <<= 1;
+
+	if (features & FEATURES__DMA)
+		denali->dma_avail = true;
+
+	if (denali->dma_avail) {
+		int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
+
+		ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
+		if (ret) {
+			dev_info(denali->dev,
+				 "Failed to set DMA mask. Disabling DMA.\n");
+			denali->dma_avail = false;
+		}
+	}
+
+	if (denali->dma_avail) {
+		if (denali->caps & DENALI_CAP_DMA_64BIT)
+			denali->setup_dma = denali_setup_dma64;
+		else
+			denali->setup_dma = denali_setup_dma32;
+	}
+
+	if (features & FEATURES__INDEX_ADDR) {
+		denali->host_read = denali_indexed_read;
+		denali->host_write = denali_indexed_write;
+	} else {
+		denali->host_read = denali_direct_read;
+		denali->host_write = denali_direct_write;
+	}
+
+	/*
+	 * Set how many bytes should be skipped before writing data in OOB.
+	 * If a non-zero value has already been set (by firmware or something),
+	 * just use it. Otherwise, set the driver's default.
+	 */
+	denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
+	if (!denali->oob_skip_bytes) {
+		denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES;
+		iowrite32(denali->oob_skip_bytes,
+			  denali->reg + SPARE_AREA_SKIP_BYTES);
+	}
+
+	iowrite32(0, denali->reg + TRANSFER_SPARE_REG);
+	iowrite32(GENMASK(denali->nbanks - 1, 0), denali->reg + RB_PIN_ENABLED);
+	iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
+	iowrite32(ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
+	iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
+
+	denali_clear_irq_all(denali);
+
+	ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+			       IRQF_SHARED, DENALI_NAND_NAME, denali);
+	if (ret) {
+		dev_err(denali->dev, "Unable to request IRQ\n");
+		return ret;
+	}
+
+	denali_enable_irq(denali);
+
+	return 0;
+}
 EXPORT_SYMBOL(denali_init);
 
-void denali_remove(struct denali_nand_info *denali)
+void denali_remove(struct denali_controller *denali)
 {
-	nand_release(&denali->nand);
+	struct denali_chip *dchip;
+
+	list_for_each_entry(dchip, &denali->chips, node)
+		nand_release(&dchip->chip);
+
 	denali_disable_irq(denali);
 }
 EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h
index c8c2620fc736..e5cdcda56d14 100644
--- a/drivers/mtd/nand/raw/denali.h
+++ b/drivers/mtd/nand/raw/denali.h
@@ -9,6 +9,7 @@
 
 #include <linux/bits.h>
 #include <linux/completion.h>
+#include <linux/list.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/spinlock_types.h>
 #include <linux/types.h>
@@ -290,38 +291,108 @@
 #define     CHNL_ACTIVE__CHANNEL2			BIT(2)
 #define     CHNL_ACTIVE__CHANNEL3			BIT(3)
 
-struct denali_nand_info {
-	struct nand_chip nand;
-	unsigned long clk_rate;		/* core clock rate */
-	unsigned long clk_x_rate;	/* bus interface clock rate */
-	int active_bank;		/* currently selected bank */
+/**
+ * struct denali_chip_sel - per-CS data of Denali NAND
+ *
+ * @bank:                  bank id of the controller this CS is connected to
+ * @hwhr2_and_we_2_re:     value of timing register HWHR2_AND_WE_2_RE
+ * @tcwaw_and_addr_2_data: value of timing register TCWAW_AND_ADDR_2_DATA
+ * @re_2_we:               value of timing register RE_2_WE
+ * @acc_clks:              value of timing register ACC_CLKS
+ * @rdwr_en_lo_cnt:        value of timing register RDWR_EN_LO_CNT
+ * @rdwr_en_hi_cnt:        value of timing register RDWR_EN_HI_CNT
+ * @cs_setup_cnt:          value of timing register CS_SETUP_CNT
+ * @re_2_re:               value of timing register RE_2_RE
+ */
+struct denali_chip_sel {
+	int bank;
+	u32 hwhr2_and_we_2_re;
+	u32 tcwaw_and_addr_2_data;
+	u32 re_2_we;
+	u32 acc_clks;
+	u32 rdwr_en_lo_cnt;
+	u32 rdwr_en_hi_cnt;
+	u32 cs_setup_cnt;
+	u32 re_2_re;
+};
+
+/**
+ * struct denali_chip - per-chip data of Denali NAND
+ *
+ * @chip:  base NAND chip structure
+ * @node:  node to be used to associate this chip with the controller
+ * @nsels: the number of CS lines of this chip
+ * @sels:  the array of per-cs data
+ */
+struct denali_chip {
+	struct nand_chip chip;
+	struct list_head node;
+	unsigned int nsels;
+	struct denali_chip_sel sels[0];
+};
+
+/**
+ * struct denali_controller - Denali NAND controller data
+ *
+ * @controller:     base NAND controller structure
+ * @dev:            device
+ * @chips:          the list of chips attached to this controller
+ * @clk_rate:       frequency of core clock
+ * @clk_x_rate:     frequency of bus interface clock
+ * @reg:            base of Register Interface
+ * @host:           base of Host Data/Command interface
+ * @complete:       completion used to wait for interrupts
+ * @irq:            interrupt number
+ * @irq_mask:       interrupt bits the controller is waiting for
+ * @irq_status:     interrupt bits of events that have happened
+ * @irq_lock:       lock to protect @irq_mask and @irq_status
+ * @dma_avail:      set if DMA engine is available
+ * @devs_per_cs:    number of devices connected in parallel
+ * @oob_skip_bytes: number of bytes in OOB skipped by the ECC engine
+ * @active_bank:    active bank id
+ * @nbanks:         the number of banks supported by this controller
+ * @revision:       IP revision
+ * @caps:           controller capabilities that cannot be detected run-time
+ * @ecc_caps:       ECC engine capabilities
+ * @host_read:      callback for read access of Host Data/Command Interface
+ * @host_write:     callback for write access of Host Data/Command Interface
+ * @setup_dma:      callback for setup of the Data DMA
+ */
+struct denali_controller {
+	struct nand_controller controller;
 	struct device *dev;
-	void __iomem *reg;		/* Register Interface */
-	void __iomem *host;		/* Host Data/Command Interface */
+	struct list_head chips;
+	unsigned long clk_rate;
+	unsigned long clk_x_rate;
+	void __iomem *reg;
+	void __iomem *host;
 	struct completion complete;
-	spinlock_t irq_lock;		/* protect irq_mask and irq_status */
-	u32 irq_mask;			/* interrupts we are waiting for */
-	u32 irq_status;			/* interrupts that have happened */
 	int irq;
-	void *buf;			/* for syndrome layout conversion */
-	int dma_avail;			/* can support DMA? */
-	int devs_per_cs;		/* devices connected in parallel */
-	int oob_skip_bytes;		/* number of bytes reserved for BBM */
-	int max_banks;
-	unsigned int revision;		/* IP revision */
-	unsigned int caps;		/* IP capability (or quirk) */
+	u32 irq_mask;
+	u32 irq_status;
+	spinlock_t irq_lock;
+	bool dma_avail;
+	int devs_per_cs;
+	int oob_skip_bytes;
+	int active_bank;
+	int nbanks;
+	unsigned int revision;
+	unsigned int caps;
 	const struct nand_ecc_caps *ecc_caps;
-	u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
-	void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
-	void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
-			  int page, int write);
+	u32 (*host_read)(struct denali_controller *denali, u32 addr);
+	void (*host_write)(struct denali_controller *denali, u32 addr,
+			   u32 data);
+	void (*setup_dma)(struct denali_controller *denali, dma_addr_t dma_addr,
+			  int page, bool write);
 };
 
 #define DENALI_CAP_HW_ECC_FIXUP			BIT(0)
 #define DENALI_CAP_DMA_64BIT			BIT(1)
 
 int denali_calc_ecc_bytes(int step_size, int strength);
-int denali_init(struct denali_nand_info *denali);
-void denali_remove(struct denali_nand_info *denali);
+int denali_chip_init(struct denali_controller *denali,
+		     struct denali_chip *dchip);
+int denali_init(struct denali_controller *denali);
+void denali_remove(struct denali_controller *denali);
 
 #endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c
index 0b5ae2418815..5e14836f6bd5 100644
--- a/drivers/mtd/nand/raw/denali_dt.c
+++ b/drivers/mtd/nand/raw/denali_dt.c
@@ -18,7 +18,7 @@
 #include "denali.h"
 
 struct denali_dt {
-	struct denali_nand_info	denali;
+	struct denali_controller controller;
 	struct clk *clk;	/* core clock */
 	struct clk *clk_x;	/* bus interface clock */
 	struct clk *clk_ecc;	/* ECC circuit clock */
@@ -71,19 +71,92 @@ static const struct of_device_id denali_nand_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
 
+static int denali_dt_chip_init(struct denali_controller *denali,
+			       struct device_node *chip_np)
+{
+	struct denali_chip *dchip;
+	u32 bank;
+	int nsels, i, ret;
+
+	nsels = of_property_count_u32_elems(chip_np, "reg");
+	if (nsels < 0)
+		return nsels;
+
+	dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+			     GFP_KERNEL);
+	if (!dchip)
+		return -ENOMEM;
+
+	dchip->nsels = nsels;
+
+	for (i = 0; i < nsels; i++) {
+		ret = of_property_read_u32_index(chip_np, "reg", i, &bank);
+		if (ret)
+			return ret;
+
+		dchip->sels[i].bank = bank;
+
+		nand_set_flash_node(&dchip->chip, chip_np);
+	}
+
+	return denali_chip_init(denali, dchip);
+}
+
+/* Backward compatibility for old platforms */
+static int denali_dt_legacy_chip_init(struct denali_controller *denali)
+{
+	struct denali_chip *dchip;
+	int nsels, i;
+
+	nsels = denali->nbanks;
+
+	dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+			     GFP_KERNEL);
+	if (!dchip)
+		return -ENOMEM;
+
+	dchip->nsels = nsels;
+
+	for (i = 0; i < nsels; i++)
+		dchip->sels[i].bank = i;
+
+	nand_set_flash_node(&dchip->chip, denali->dev->of_node);
+
+	return denali_chip_init(denali, dchip);
+}
+
+/*
+ * Check the DT binding.
+ * The new binding expects chip subnodes in the controller node.
+ * So, #address-cells = <1>; #size-cells = <0>; are required.
+ * Check the #size-cells to distinguish the binding.
+ */
+static bool denali_dt_is_legacy_binding(struct device_node *np)
+{
+	u32 cells;
+	int ret;
+
+	ret = of_property_read_u32(np, "#size-cells", &cells);
+	if (ret)
+		return true;
+
+	return cells != 0;
+}
+
 static int denali_dt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct denali_dt *dt;
 	const struct denali_dt_data *data;
-	struct denali_nand_info *denali;
+	struct denali_controller *denali;
+	struct device_node *np;
 	int ret;
 
 	dt = devm_kzalloc(dev, sizeof(*dt), GFP_KERNEL);
 	if (!dt)
 		return -ENOMEM;
-	denali = &dt->denali;
+	denali = &dt->controller;
 
 	data = of_device_get_match_data(dev);
 	if (data) {
@@ -140,9 +213,26 @@ static int denali_dt_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_disable_clk_ecc;
 
+	if (denali_dt_is_legacy_binding(dev->of_node)) {
+		ret = denali_dt_legacy_chip_init(denali);
+		if (ret)
+			goto out_remove_denali;
+	} else {
+		for_each_child_of_node(dev->of_node, np) {
+			ret = denali_dt_chip_init(denali, np);
+			if (ret) {
+				of_node_put(np);
+				goto out_remove_denali;
+			}
+		}
+	}
+
 	platform_set_drvdata(pdev, dt);
+
 	return 0;
 
+out_remove_denali:
+	denali_remove(denali);
 out_disable_clk_ecc:
 	clk_disable_unprepare(dt->clk_ecc);
 out_disable_clk_x:
@@ -157,7 +247,7 @@ static int denali_dt_remove(struct platform_device *pdev)
 {
 	struct denali_dt *dt = platform_get_drvdata(pdev);
 
-	denali_remove(&dt->denali);
+	denali_remove(&dt->controller);
 	clk_disable_unprepare(dt->clk_ecc);
 	clk_disable_unprepare(dt->clk_x);
 	clk_disable_unprepare(dt->clk);
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 48e9ac54ad53..d62aa5271753 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -29,10 +29,11 @@ NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15);
 
 static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	int ret;
 	resource_size_t csr_base, mem_base;
 	unsigned long csr_len, mem_len;
-	struct denali_nand_info *denali;
+	struct denali_controller *denali;
+	struct denali_chip *dchip;
+	int nsels, ret, i;
 
 	denali = devm_kzalloc(&dev->dev, sizeof(*denali), GFP_KERNEL);
 	if (!denali)
@@ -64,7 +65,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	denali->dev = &dev->dev;
 	denali->irq = dev->irq;
 	denali->ecc_caps = &denali_pci_ecc_caps;
-	denali->nand.ecc.options |= NAND_ECC_MAXIMIZE;
 	denali->clk_rate = 50000000;		/* 50 MHz */
 	denali->clk_x_rate = 200000000;		/* 200 MHz */
 
@@ -84,27 +84,49 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!denali->host) {
 		dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
 		ret = -ENOMEM;
-		goto failed_remap_reg;
+		goto out_unmap_reg;
 	}
 
 	ret = denali_init(denali);
 	if (ret)
-		goto failed_remap_mem;
+		goto out_unmap_host;
+
+	nsels = denali->nbanks;
+
+	dchip = devm_kzalloc(denali->dev, struct_size(dchip, sels, nsels),
+			     GFP_KERNEL);
+	if (!dchip) {
+		ret = -ENOMEM;
+		goto out_remove_denali;
+	}
+
+	dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+
+	dchip->nsels = nsels;
+
+	for (i = 0; i < nsels; i++)
+		dchip->sels[i].bank = i;
+
+	ret = denali_chip_init(denali, dchip);
+	if (ret)
+		goto out_remove_denali;
 
 	pci_set_drvdata(dev, denali);
 
 	return 0;
 
-failed_remap_mem:
+out_remove_denali:
+	denali_remove(denali);
+out_unmap_host:
 	iounmap(denali->host);
-failed_remap_reg:
+out_unmap_reg:
 	iounmap(denali->reg);
 	return ret;
 }
 
 static void denali_pci_remove(struct pci_dev *dev)
 {
-	struct denali_nand_info *denali = pci_get_drvdata(dev);
+	struct denali_controller *denali = pci_get_drvdata(dev);
 
 	denali_remove(denali);
 	iounmap(denali->reg);
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 53f57e0f007e..f430c4bf0323 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1028,6 +1028,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	struct doc_priv *doc = nand_get_controller_data(this);
+	struct nand_memory_organization *memorg;
 	int ret = 0;
 	u_char *buf;
 	struct NFTLMediaHeader *mh;
@@ -1036,6 +1037,8 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 	unsigned blocks, maxblocks;
 	int offs, numheaders;
 
+	memorg = nanddev_get_memorg(&this->base);
+
 	buf = kmalloc(mtd->writesize, GFP_KERNEL);
 	if (!buf) {
 		return 0;
@@ -1082,6 +1085,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 	   implementation of the NAND layer.  */
 	if (mh->UnitSizeFactor != 0xff) {
 		this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
+		memorg->pages_per_eraseblock <<= (0xff - mh->UnitSizeFactor);
 		mtd->erasesize <<= (0xff - mh->UnitSizeFactor);
 		pr_info("Setting virtual erase size to %d\n", mtd->erasesize);
 		blocks = mtd->size >> this->bbt_erase_shift;
@@ -1287,7 +1291,7 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
 	struct doc_priv *doc = nand_get_controller_data(this);
 	struct mtd_partition parts[5];
 
-	if (this->numchips > doc->chips_per_floor) {
+	if (nanddev_ntargets(&this->base) > doc->chips_per_floor) {
 		pr_err("Multi-floor INFTL devices not yet supported.\n");
 		return -EIO;
 	}
@@ -1477,6 +1481,7 @@ static int __init doc_probe(unsigned long physadr)
 			break;
 		case DOC_ChipID_DocMilPlus32:
 			pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
+			/* fall through */
 		default:
 			ret = -ENODEV;
 			goto notfound;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 70f0d2b450ea..423828ff68e6 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -355,6 +355,15 @@ static void fsl_elbc_cmdfunc(struct nand_chip *chip, unsigned int command,
 		fsl_elbc_run_command(mtd);
 		return;
 
+	/* RNDOUT moves the pointer inside the page */
+	case NAND_CMD_RNDOUT:
+		dev_dbg(priv->dev,
+			"fsl_elbc_cmdfunc: NAND_CMD_RNDOUT, column: 0x%x.\n",
+			column);
+
+		elbc_fcm_ctrl->index = column;
+		return;
+
 	/* READOOB reads only the OOB because no ECC is performed. */
 	case NAND_CMD_READOOB:
 		dev_vdbg(priv->dev,
@@ -635,79 +644,6 @@ static int fsl_elbc_wait(struct nand_chip *chip)
 	return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
-static int fsl_elbc_attach_chip(struct nand_chip *chip)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
-	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-	unsigned int al;
-
-	/* calculate FMR Address Length field */
-	al = 0;
-	if (chip->pagemask & 0xffff0000)
-		al++;
-	if (chip->pagemask & 0xff000000)
-		al++;
-
-	priv->fmr |= al << FMR_AL_SHIFT;
-
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
-	        chip->numchips);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
-	        chip->chipsize);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
-	        chip->pagemask);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->legacy.chip_delay = %d\n",
-	        chip->legacy.chip_delay);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
-	        chip->badblockpos);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
-	        chip->chip_shift);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
-	        chip->page_shift);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
-	        chip->phys_erase_shift);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
-	        chip->ecc.mode);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
-	        chip->ecc.steps);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
-	        chip->ecc.bytes);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
-	        chip->ecc.total);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
-		mtd->ooblayout);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
-	        mtd->erasesize);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
-	        mtd->writesize);
-	dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
-	        mtd->oobsize);
-
-	/* adjust Option Register and ECC to match Flash page size */
-	if (mtd->writesize == 512) {
-		priv->page_size = 0;
-		clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
-	} else if (mtd->writesize == 2048) {
-		priv->page_size = 1;
-		setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
-	} else {
-		dev_err(priv->dev,
-		        "fsl_elbc_init: page size %d is not supported\n",
-		        mtd->writesize);
-		return -ENOTSUPP;
-	}
-
-	return 0;
-}
-
-static const struct nand_controller_ops fsl_elbc_controller_ops = {
-	.attach_chip = fsl_elbc_attach_chip,
-};
-
 static int fsl_elbc_read_page(struct nand_chip *chip, uint8_t *buf,
 			      int oob_required, int page)
 {
@@ -794,27 +730,116 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->controller = &elbc_fcm_ctrl->controller;
 	nand_set_controller_data(chip, priv);
 
-	chip->ecc.read_page = fsl_elbc_read_page;
-	chip->ecc.write_page = fsl_elbc_write_page;
-	chip->ecc.write_subpage = fsl_elbc_write_subpage;
-
-	/* If CS Base Register selects full hardware ECC then use it */
-	if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
-	    BR_DECC_CHK_GEN) {
-		chip->ecc.mode = NAND_ECC_HW;
-		mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
-		chip->ecc.size = 512;
-		chip->ecc.bytes = 3;
-		chip->ecc.strength = 1;
+	return 0;
+}
+
+static int fsl_elbc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	unsigned int al;
+
+	switch (chip->ecc.mode) {
+	/*
+	 * if ECC was not chosen in DT, decide whether to use HW or SW ECC from
+	 * CS Base Register
+	 */
+	case NAND_ECC_NONE:
+		/* If CS Base Register selects full hardware ECC then use it */
+		if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
+		    BR_DECC_CHK_GEN) {
+			chip->ecc.read_page = fsl_elbc_read_page;
+			chip->ecc.write_page = fsl_elbc_write_page;
+			chip->ecc.write_subpage = fsl_elbc_write_subpage;
+
+			chip->ecc.mode = NAND_ECC_HW;
+			mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
+			chip->ecc.size = 512;
+			chip->ecc.bytes = 3;
+			chip->ecc.strength = 1;
+		} else {
+			/* otherwise fall back to default software ECC */
+			chip->ecc.mode = NAND_ECC_SOFT;
+			chip->ecc.algo = NAND_ECC_HAMMING;
+		}
+		break;
+
+	/* if SW ECC was chosen in DT, we do not need to set anything here */
+	case NAND_ECC_SOFT:
+		break;
+
+	/* should we also implement NAND_ECC_HW to do as the code above? */
+	default:
+		return -EINVAL;
+	}
+
+	/* calculate FMR Address Length field */
+	al = 0;
+	if (chip->pagemask & 0xffff0000)
+		al++;
+	if (chip->pagemask & 0xff000000)
+		al++;
+
+	priv->fmr |= al << FMR_AL_SHIFT;
+
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
+	        nanddev_ntargets(&chip->base));
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+	        nanddev_target_size(&chip->base));
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+	        chip->pagemask);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->legacy.chip_delay = %d\n",
+	        chip->legacy.chip_delay);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+	        chip->badblockpos);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+	        chip->chip_shift);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+	        chip->page_shift);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+	        chip->phys_erase_shift);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+	        chip->ecc.mode);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+	        chip->ecc.steps);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+	        chip->ecc.bytes);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+	        chip->ecc.total);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+		mtd->ooblayout);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+	        mtd->erasesize);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+	        mtd->writesize);
+	dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+	        mtd->oobsize);
+
+	/* adjust Option Register and ECC to match Flash page size */
+	if (mtd->writesize == 512) {
+		priv->page_size = 0;
+		clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
+	} else if (mtd->writesize == 2048) {
+		priv->page_size = 1;
+		setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
 	} else {
-		/* otherwise fall back to default software ECC */
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		dev_err(priv->dev,
+		        "fsl_elbc_init: page size %d is not supported\n",
+		        mtd->writesize);
+		return -ENOTSUPP;
 	}
 
 	return 0;
 }
 
+static const struct nand_controller_ops fsl_elbc_controller_ops = {
+	.attach_chip = fsl_elbc_attach_chip,
+};
+
 static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 {
 	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index e65d274399f9..04a3dcd675bf 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -722,9 +722,9 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
 	struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
 
 	dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
-							chip->numchips);
+		nanddev_ntargets(&chip->base));
 	dev_dbg(priv->dev, "%s: nand->chipsize = %lld\n", __func__,
-							chip->chipsize);
+	        nanddev_target_size(&chip->base));
 	dev_dbg(priv->dev, "%s: nand->pagemask = %8x\n", __func__,
 							chip->pagemask);
 	dev_dbg(priv->dev, "%s: nand->legacy.chip_delay = %d\n", __func__,
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
index a4768df5083f..a8b26d2e793c 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -157,8 +157,7 @@ int gpmi_init(struct gpmi_nand_data *this)
 	 * Reset BCH here, too. We got failures otherwise :(
 	 * See later BCH reset for explanation of MX23 and MX28 handling
 	 */
-	ret = gpmi_reset_block(r->bch_regs,
-			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
 	if (ret)
 		goto err_out;
 
@@ -266,8 +265,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
 	* and MX28.
 	*/
-	ret = gpmi_reset_block(r->bch_regs,
-			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MXS(this));
 	if (ret)
 		goto err_out;
 
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index ed405c9434fe..40df20d1adf5 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -171,7 +171,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
 	struct bch_geometry *geo = &this->bch_geometry;
 
 	/* Do the sanity check. */
-	if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+	if (GPMI_IS_MXS(this)) {
 		/* The mx23/mx28 only support the GF13. */
 		if (geo->gf_len == 14)
 			return false;
@@ -204,7 +204,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
 	default:
 		dev_err(this->dev,
 			"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
-			chip->ecc_strength_ds, chip->ecc_step_ds);
+			chip->base.eccreq.strength,
+			chip->base.eccreq.step_size);
 		return -EINVAL;
 	}
 	geo->ecc_chunk_size = ecc_step;
@@ -417,11 +418,13 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
 
 	if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
 				|| legacy_set_geometry(this)) {
-		if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+		if (!(chip->base.eccreq.strength > 0 &&
+		      chip->base.eccreq.step_size > 0))
 			return -EINVAL;
 
-		return set_geometry_by_ecc_info(this, chip->ecc_strength_ds,
-						chip->ecc_step_ds);
+		return set_geometry_by_ecc_info(this,
+						chip->base.eccreq.strength,
+						chip->base.eccreq.step_size);
 	}
 
 	return 0;
@@ -1602,7 +1605,7 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
 	unsigned int search_area_size_in_strides;
 	unsigned int stride;
 	unsigned int page;
-	uint8_t *buffer = chip->data_buf;
+	u8 *buffer = nand_get_data_buf(chip);
 	int saved_chip_number;
 	int found_an_ncb_fingerprint = false;
 
@@ -1664,7 +1667,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
 	unsigned int block;
 	unsigned int stride;
 	unsigned int page;
-	uint8_t      *buffer = chip->data_buf;
+	u8 *buffer = nand_get_data_buf(chip);
 	int saved_chip_number;
 	int status;
 
@@ -1753,7 +1756,7 @@ static int mx23_boot_init(struct gpmi_nand_data  *this)
 	dev_dbg(dev, "Transcribing bad block marks...\n");
 
 	/* Compute the number of blocks in the entire medium. */
-	block_count = chip->chipsize >> chip->phys_erase_shift;
+	block_count = nanddev_eraseblocks_per_target(&chip->base);
 
 	/*
 	 * Loop over all the blocks in the medium, transcribing block marks as
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index d0b79bac2728..a804a4a5bd46 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -207,4 +207,5 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
 				 GPMI_IS_MX7D(x))
+#define GPMI_IS_MXS(x)		(GPMI_IS_MX23(x) || GPMI_IS_MX28(x))
 #endif
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index f3f9aa160cff..e4526fff9da4 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -849,7 +849,7 @@ static int hisi_nfc_resume(struct device *dev)
 	struct hinfc_host *host = dev_get_drvdata(dev);
 	struct nand_chip *chip = &host->chip;
 
-	for (cs = 0; cs < chip->numchips; cs++)
+	for (cs = 0; cs < nanddev_ntargets(&chip->base); cs++)
 		hisi_nfc_send_cmd_reset(host, cs);
 	hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
 		    HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 000000000000..7cfc77021154
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,50 @@
+config MTD_NAND_JZ4740
+	tristate "JZ4740 NAND controller"
+	depends on MACH_JZ4740 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_JZ4780
+	tristate "JZ4780 NAND controller"
+	depends on JZ4780_NEMC
+	help
+	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+	  based boards, using the BCH controller for hardware error correction.
+
+if MTD_NAND_JZ4780
+
+config MTD_NAND_INGENIC_ECC
+	tristate
+
+config MTD_NAND_JZ4740_ECC
+	tristate "Hardware BCH support for JZ4740 SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the Reed-Solomon error-correction
+	  hardware present on the JZ4740 SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4740-ecc.
+
+config MTD_NAND_JZ4725B_BCH
+	tristate "Hardware BCH support for JZ4725B SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the BCH error-correction hardware
+	  present on the JZ4725B SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4725b-bch.
+
+config MTD_NAND_JZ4780_BCH
+	tristate "Hardware BCH support for JZ4780 SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the BCH error-correction hardware
+	  present on the JZ4780 SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4780-bch.
+
+endif # MTD_NAND_JZ4780
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 000000000000..ab2c5f47e5b7
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
+
+obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
+obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
new file mode 100644
index 000000000000..d3e085c5685a
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx ECC common code
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+/**
+ * ingenic_ecc_calculate() - calculate ECC for a data buffer
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for ECC
+ * controller.
+ */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code)
+{
+	return ecc->ops->calculate(ecc, params, buf, ecc_code);
+}
+EXPORT_SYMBOL(ingenic_ecc_calculate);
+
+/**
+ * ingenic_ecc_correct() - detect and correct bit errors
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params,
+			u8 *buf, u8 *ecc_code)
+{
+	return ecc->ops->correct(ecc, params, buf, ecc_code);
+}
+EXPORT_SYMBOL(ingenic_ecc_correct);
+
+/**
+ * ingenic_ecc_get() - get the ECC controller device
+ * @np: ECC device tree node.
+ *
+ * Gets the ECC controller device from the specified device tree node. The
+ * device must be released with ingenic_ecc_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct ingenic_ecc *ecc;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev || !platform_get_drvdata(pdev))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	get_device(&pdev->dev);
+
+	ecc = platform_get_drvdata(pdev);
+	clk_prepare_enable(ecc->clk);
+
+	return ecc;
+}
+
+/**
+ * of_ingenic_ecc_get() - get the ECC controller from a DT node
+ * @of_node: the node that contains an ecc-engine property.
+ *
+ * Get the ecc-engine property from the given device tree
+ * node and pass it to ingenic_ecc_get to do the work.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node)
+{
+	struct ingenic_ecc *ecc = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(of_node, "ecc-engine", 0);
+
+	/*
+	 * If the ecc-engine property is not found, check for the deprecated
+	 * ingenic,bch-controller property
+	 */
+	if (!np)
+		np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+	if (np) {
+		ecc = ingenic_ecc_get(np);
+		of_node_put(np);
+	}
+	return ecc;
+}
+EXPORT_SYMBOL(of_ingenic_ecc_get);
+
+/**
+ * ingenic_ecc_release() - release the ECC controller device
+ * @ecc: ECC device.
+ */
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+	clk_disable_unprepare(ecc->clk);
+	put_device(ecc->dev);
+}
+EXPORT_SYMBOL(ingenic_ecc_release);
+
+int ingenic_ecc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_ecc *ecc;
+	struct resource *res;
+
+	ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+	if (!ecc)
+		return -ENOMEM;
+
+	ecc->ops = device_get_match_data(dev);
+	if (!ecc->ops)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ecc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ecc->base))
+		return PTR_ERR(ecc->base);
+
+	ecc->ops->disable(ecc);
+
+	ecc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ecc->clk)) {
+		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
+		return PTR_ERR(ecc->clk);
+	}
+
+	mutex_init(&ecc->lock);
+
+	ecc->dev = dev;
+	platform_set_drvdata(pdev, ecc);
+
+	return 0;
+}
+EXPORT_SYMBOL(ingenic_ecc_probe);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic ECC common driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
new file mode 100644
index 000000000000..2cda439b5e11
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+#define __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/asm-generic/errno-base.h>
+
+struct clk;
+struct device;
+struct ingenic_ecc;
+struct platform_device;
+
+/**
+ * struct ingenic_ecc_params - ECC parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct ingenic_ecc_params {
+	int size;
+	int bytes;
+	int strength;
+};
+
+#if IS_ENABLED(CONFIG_MTD_NAND_INGENIC_ECC)
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code);
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params, u8 *buf,
+			u8 *ecc_code);
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc);
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np);
+#else /* CONFIG_MTD_NAND_INGENIC_ECC */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code)
+{
+	return -ENODEV;
+}
+
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params, u8 *buf,
+			u8 *ecc_code)
+{
+	return -ENODEV;
+}
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+}
+
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_MTD_NAND_INGENIC_ECC */
+
+struct ingenic_ecc_ops {
+	void (*disable)(struct ingenic_ecc *ecc);
+	int (*calculate)(struct ingenic_ecc *ecc,
+			 struct ingenic_ecc_params *params,
+			 const u8 *buf, u8 *ecc_code);
+	int (*correct)(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params,
+			u8 *buf, u8 *ecc_code);
+};
+
+struct ingenic_ecc {
+	struct device *dev;
+	const struct ingenic_ecc_ops *ops;
+	void __iomem *base;
+	struct clk *clk;
+	struct mutex lock;
+};
+
+int ingenic_ecc_probe(struct platform_device *pdev);
+
+#endif /* __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ */
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
new file mode 100644
index 000000000000..d7b7c0f13909
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "ingenic_ecc.h"
+
+#define DRV_NAME	"ingenic-nand"
+
+/* Command delay when there is no R/B pin. */
+#define RB_DELAY_US	100
+
+struct jz_soc_info {
+	unsigned long data_offset;
+	unsigned long addr_offset;
+	unsigned long cmd_offset;
+	const struct mtd_ooblayout_ops *oob_layout;
+};
+
+struct ingenic_nand_cs {
+	unsigned int bank;
+	void __iomem *base;
+};
+
+struct ingenic_nfc {
+	struct device *dev;
+	struct ingenic_ecc *ecc;
+	const struct jz_soc_info *soc_info;
+	struct nand_controller controller;
+	unsigned int num_banks;
+	struct list_head chips;
+	int selected;
+	struct ingenic_nand_cs cs[];
+};
+
+struct ingenic_nand {
+	struct nand_chip chip;
+	struct list_head chip_list;
+
+	struct gpio_desc *busy_gpio;
+	struct gpio_desc *wp_gpio;
+	unsigned int reading: 1;
+};
+
+static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
+}
+
+static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
+{
+	return container_of(ctrl, struct ingenic_nfc, controller);
+}
+
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section || !ecc->total)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = 12;
+
+	return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 12;
+	oobregion->offset = 12 + ecc->total;
+
+	return 0;
+}
+
+const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+	.ecc = qi_lb60_ooblayout_ecc,
+	.free = qi_lb60_ooblayout_free,
+};
+
+static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section || !ecc->total)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = 3;
+
+	return 0;
+}
+
+static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 3;
+	oobregion->offset = 3 + ecc->total;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
+	.ecc = jz4725b_ooblayout_ecc,
+	.free = jz4725b_ooblayout_free,
+};
+
+static void ingenic_nand_select_chip(struct nand_chip *chip, int chipnr)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_nand_cs *cs;
+
+	/* Ensure the currently selected chip is deasserted. */
+	if (chipnr == -1 && nfc->selected >= 0) {
+		cs = &nfc->cs[nfc->selected];
+		jz4780_nemc_assert(nfc->dev, cs->bank, false);
+	}
+
+	nfc->selected = chipnr;
+}
+
+static void ingenic_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
+				  unsigned int ctrl)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_nand_cs *cs;
+
+	if (WARN_ON(nfc->selected < 0))
+		return;
+
+	cs = &nfc->cs[nfc->selected];
+
+	jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_ALE)
+		writeb(cmd, cs->base + nfc->soc_info->addr_offset);
+	else if (ctrl & NAND_CLE)
+		writeb(cmd, cs->base + nfc->soc_info->cmd_offset);
+}
+
+static int ingenic_nand_dev_ready(struct nand_chip *chip)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+	return !gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+	nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
+				      u8 *ecc_code)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_ecc_params params;
+
+	/*
+	 * Don't need to generate the ECC when reading, the ECC engine does it
+	 * for us as part of decoding/correction.
+	 */
+	if (nand->reading)
+		return 0;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return ingenic_ecc_calculate(nfc->ecc, &params, dat, ecc_code);
+}
+
+static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
+				    u8 *read_ecc, u8 *calc_ecc)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_ecc_params params;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return ingenic_ecc_correct(nfc->ecc, &params, dat, read_ecc);
+}
+
+static int ingenic_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+	int eccbytes;
+
+	if (chip->ecc.strength == 4) {
+		/* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
+		chip->ecc.bytes = 9;
+	} else {
+		chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
+				  (chip->ecc.strength / 8);
+	}
+
+	switch (chip->ecc.mode) {
+	case NAND_ECC_HW:
+		if (!nfc->ecc) {
+			dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
+			return -ENODEV;
+		}
+
+		chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
+		chip->ecc.calculate = ingenic_nand_ecc_calculate;
+		chip->ecc.correct = ingenic_nand_ecc_correct;
+		/* fall through */
+	case NAND_ECC_SOFT:
+		dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+			 (nfc->ecc) ? "hardware ECC" : "software ECC",
+			 chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+		break;
+	case NAND_ECC_NONE:
+		dev_info(nfc->dev, "not using ECC\n");
+		break;
+	default:
+		dev_err(nfc->dev, "ECC mode %d not supported\n",
+			chip->ecc.mode);
+		return -EINVAL;
+	}
+
+	/* The NAND core will generate the ECC layout for SW ECC */
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return 0;
+
+	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+	eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+	if (eccbytes > mtd->oobsize - 2) {
+		dev_err(nfc->dev,
+			"invalid ECC config: required %d ECC bytes, but only %d are available",
+			eccbytes, mtd->oobsize - 2);
+		return -EINVAL;
+	}
+
+	/*
+	 * The generic layout for BBT markers will most likely overlap with our
+	 * ECC bytes in the OOB, so move the BBT markers outside the OOB area.
+	 */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	/* For legacy reasons we use a different layout on the qi,lb60 board. */
+	if (of_machine_is_compatible("qi,lb60"))
+		mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
+	else
+		mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+
+	return 0;
+}
+
+static const struct nand_controller_ops ingenic_nand_controller_ops = {
+	.attach_chip = ingenic_nand_attach_chip,
+};
+
+static int ingenic_nand_init_chip(struct platform_device *pdev,
+				  struct ingenic_nfc *nfc,
+				  struct device_node *np,
+				  unsigned int chipnr)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_nand *nand;
+	struct ingenic_nand_cs *cs;
+	struct resource *res;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	const __be32 *reg;
+	int ret = 0;
+
+	cs = &nfc->cs[chipnr];
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		return -EINVAL;
+
+	cs->bank = be32_to_cpu(*reg);
+
+	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
+	cs->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cs->base))
+		return PTR_ERR(cs->base);
+
+	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+	if (!nand)
+		return -ENOMEM;
+
+	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+	if (IS_ERR(nand->busy_gpio)) {
+		ret = PTR_ERR(nand->busy_gpio);
+		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+		return ret;
+	} else if (nand->busy_gpio) {
+		nand->chip.legacy.dev_ready = ingenic_nand_dev_ready;
+	}
+
+	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+	if (IS_ERR(nand->wp_gpio)) {
+		ret = PTR_ERR(nand->wp_gpio);
+		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+		return ret;
+	}
+
+	chip = &nand->chip;
+	mtd = nand_to_mtd(chip);
+	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+				   cs->bank);
+	if (!mtd->name)
+		return -ENOMEM;
+	mtd->dev.parent = dev;
+
+	chip->legacy.IO_ADDR_R = cs->base + nfc->soc_info->data_offset;
+	chip->legacy.IO_ADDR_W = cs->base + nfc->soc_info->data_offset;
+	chip->legacy.chip_delay = RB_DELAY_US;
+	chip->options = NAND_NO_SUBPAGE_WRITE;
+	chip->legacy.select_chip = ingenic_nand_select_chip;
+	chip->legacy.cmd_ctrl = ingenic_nand_cmd_ctrl;
+	chip->ecc.mode = NAND_ECC_HW;
+	chip->controller = &nfc->controller;
+	nand_set_flash_node(chip, np);
+
+	chip->controller->ops = &ingenic_nand_controller_ops;
+	ret = nand_scan(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret) {
+		nand_release(chip);
+		return ret;
+	}
+
+	list_add_tail(&nand->chip_list, &nfc->chips);
+
+	return 0;
+}
+
+static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
+{
+	struct ingenic_nand *chip;
+
+	while (!list_empty(&nfc->chips)) {
+		chip = list_first_entry(&nfc->chips,
+					struct ingenic_nand, chip_list);
+		nand_release(&chip->chip);
+		list_del(&chip->chip_list);
+	}
+}
+
+static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
+				   struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	int i = 0;
+	int ret;
+	int num_chips = of_get_child_count(dev->of_node);
+
+	if (num_chips > nfc->num_banks) {
+		dev_err(dev, "found %d chips but only %d banks\n",
+			num_chips, nfc->num_banks);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(dev->of_node, np) {
+		ret = ingenic_nand_init_chip(pdev, nfc, np, i);
+		if (ret) {
+			ingenic_nand_cleanup_chips(nfc);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int ingenic_nand_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int num_banks;
+	struct ingenic_nfc *nfc;
+	int ret;
+
+	num_banks = jz4780_nemc_num_banks(dev);
+	if (num_banks == 0) {
+		dev_err(dev, "no banks found\n");
+		return -ENODEV;
+	}
+
+	nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	nfc->soc_info = device_get_match_data(dev);
+	if (!nfc->soc_info)
+		return -EINVAL;
+
+	/*
+	 * Check for ECC HW before we call nand_scan_ident, to prevent us from
+	 * having to call it again if the ECC driver returns -EPROBE_DEFER.
+	 */
+	nfc->ecc = of_ingenic_ecc_get(dev->of_node);
+	if (IS_ERR(nfc->ecc))
+		return PTR_ERR(nfc->ecc);
+
+	nfc->dev = dev;
+	nfc->num_banks = num_banks;
+
+	nand_controller_init(&nfc->controller);
+	INIT_LIST_HEAD(&nfc->chips);
+
+	ret = ingenic_nand_init_chips(nfc, pdev);
+	if (ret) {
+		if (nfc->ecc)
+			ingenic_ecc_release(nfc->ecc);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, nfc);
+	return 0;
+}
+
+static int ingenic_nand_remove(struct platform_device *pdev)
+{
+	struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
+
+	if (nfc->ecc)
+		ingenic_ecc_release(nfc->ecc);
+
+	ingenic_nand_cleanup_chips(nfc);
+
+	return 0;
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00008000,
+	.addr_offset = 0x00010000,
+	.oob_layout = &nand_ooblayout_lp_ops,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00008000,
+	.addr_offset = 0x00010000,
+	.oob_layout = &jz4725b_ooblayout_ops,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00400000,
+	.addr_offset = 0x00800000,
+	.oob_layout = &nand_ooblayout_lp_ops,
+};
+
+static const struct of_device_id ingenic_nand_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
+	{ .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
+	{ .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
+
+static struct platform_driver ingenic_nand_driver = {
+	.probe		= ingenic_nand_probe,
+	.remove		= ingenic_nand_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(ingenic_nand_dt_match),
+	},
+};
+module_platform_driver(ingenic_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
new file mode 100644
index 000000000000..6c852eae09cf
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4725B BCH controller driver
+ *
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * Based on jz4780_bch.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR			0x0
+#define BCH_BHCSR			0x4
+#define BCH_BHCCR			0x8
+#define BCH_BHCNT			0xc
+#define BCH_BHDR			0x10
+#define BCH_BHPAR0			0x14
+#define BCH_BHERR0			0x28
+#define BCH_BHINT			0x24
+#define BCH_BHINTES			0x3c
+#define BCH_BHINTEC			0x40
+#define BCH_BHINTE			0x38
+
+#define BCH_BHCR_ENCE			BIT(3)
+#define BCH_BHCR_BSEL			BIT(2)
+#define BCH_BHCR_INIT			BIT(1)
+#define BCH_BHCR_BCHE			BIT(0)
+
+#define BCH_BHCNT_DEC_COUNT_SHIFT	16
+#define BCH_BHCNT_DEC_COUNT_MASK	(0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
+#define BCH_BHCNT_ENC_COUNT_SHIFT	0
+#define BCH_BHCNT_ENC_COUNT_MASK	(0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
+
+#define BCH_BHERR_INDEX0_SHIFT		0
+#define BCH_BHERR_INDEX0_MASK		(0x1fff << BCH_BHERR_INDEX0_SHIFT)
+#define BCH_BHERR_INDEX1_SHIFT		16
+#define BCH_BHERR_INDEX1_MASK		(0x1fff << BCH_BHERR_INDEX1_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT		28
+#define BCH_BHINT_ERRC_MASK		(0xf << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT		16
+#define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_ALL_0			BIT(5)
+#define BCH_BHINT_ALL_F			BIT(4)
+#define BCH_BHINT_DECF			BIT(3)
+#define BCH_BHINT_ENCF			BIT(2)
+#define BCH_BHINT_UNCOR			BIT(1)
+#define BCH_BHINT_ERR			BIT(0)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US			100000
+
+static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
+{
+	writel(cfg, bch->base + BCH_BHCSR);
+}
+
+static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
+{
+	writel(cfg, bch->base + BCH_BHCCR);
+}
+
+static int jz4725b_bch_reset(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params, bool calc_ecc)
+{
+	u32 reg, max_value;
+
+	/* Clear interrupt status. */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Initialise and enable BCH. */
+	jz4725b_bch_config_clear(bch, 0x1f);
+	jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
+
+	if (params->strength == 8)
+		jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
+	else
+		jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
+
+	if (calc_ecc) /* calculate ECC from data */
+		jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
+	else /* correct data from ECC */
+		jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
+
+	jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
+
+	max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
+	if (params->size > max_value)
+		return -EINVAL;
+
+	max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
+	if (params->size + params->bytes > max_value)
+		return -EINVAL;
+
+	/* Set up BCH count register. */
+	reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
+	reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
+	writel(reg, bch->base + BCH_BHCNT);
+
+	return 0;
+}
+
+static void jz4725b_bch_disable(struct ingenic_ecc *bch)
+{
+	/* Clear interrupts */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Disable the hardware */
+	jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
+}
+
+static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
+				   size_t size)
+{
+	while (size--)
+		writeb(*buf++, bch->base + BCH_BHDR);
+}
+
+static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
+				    size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	u32 *dest32;
+	u8 *dest8;
+	u32 val, offset = 0;
+
+	dest32 = (u32 *)buf;
+	while (size32--) {
+		*dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+		offset += sizeof(u32);
+	}
+
+	dest8 = (u8 *)dest32;
+	val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+	switch (size8) {
+	case 3:
+		dest8[2] = (val >> 16) & 0xff;
+		/* fall-through */
+	case 2:
+		dest8[1] = (val >> 8) & 0xff;
+		/* fall-through */
+	case 1:
+		dest8[0] = val & 0xff;
+		break;
+	}
+}
+
+static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+				     u32 *status)
+{
+	u32 reg;
+	int ret;
+
+	/*
+	 * While we could use interrupts here and sleep until the operation
+	 * completes, the controller works fairly quickly (usually a few
+	 * microseconds) and so the overhead of sleeping until we get an
+	 * interrupt quite noticeably decreases performance.
+	 */
+	ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
+					 reg & irq, 0, BCH_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	if (status)
+		*status = reg;
+
+	writel(reg, bch->base + BCH_BHINT);
+
+	return 0;
+}
+
+static int jz4725b_calculate(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params,
+			     const u8 *buf, u8 *ecc_code)
+{
+	int ret;
+
+	mutex_lock(&bch->lock);
+
+	ret = jz4725b_bch_reset(bch, params, true);
+	if (ret) {
+		dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+		goto out_disable;
+	}
+
+	jz4725b_bch_write_data(bch, buf, params->size);
+
+	ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
+	if (ret) {
+		dev_err(bch->dev, "timed out while calculating ECC\n");
+		goto out_disable;
+	}
+
+	jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
+
+out_disable:
+	jz4725b_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+
+	return ret;
+}
+
+static int jz4725b_correct(struct ingenic_ecc *bch,
+			   struct ingenic_ecc_params *params,
+			   u8 *buf, u8 *ecc_code)
+{
+	u32 reg, errors, bit;
+	unsigned int i;
+	int ret;
+
+	mutex_lock(&bch->lock);
+
+	ret = jz4725b_bch_reset(bch, params, false);
+	if (ret) {
+		dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+		goto out;
+	}
+
+	jz4725b_bch_write_data(bch, buf, params->size);
+	jz4725b_bch_write_data(bch, ecc_code, params->bytes);
+
+	ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
+	if (ret) {
+		dev_err(bch->dev, "timed out while correcting data\n");
+		goto out;
+	}
+
+	if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
+		/* Data and ECC is all 0xff or 0x00 - nothing to correct */
+		ret = 0;
+		goto out;
+	}
+
+	if (reg & BCH_BHINT_UNCOR) {
+		/* Uncorrectable ECC error */
+		ret = -EBADMSG;
+		goto out;
+	}
+
+	errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+
+	/* Correct any detected errors. */
+	for (i = 0; i < errors; i++) {
+		if (i & 1) {
+			bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
+		} else {
+			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+			bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
+		}
+
+		buf[(bit >> 3)] ^= BIT(bit & 0x7);
+	}
+
+out:
+	jz4725b_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+
+	return ret;
+}
+
+static const struct ingenic_ecc_ops jz4725b_bch_ops = {
+	.disable = jz4725b_bch_disable,
+	.calculate = jz4725b_calculate,
+	.correct = jz4725b_correct,
+};
+
+static const struct of_device_id jz4725b_bch_dt_match[] = {
+	{ .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
+
+static struct platform_driver jz4725b_bch_driver = {
+	.probe		= ingenic_ecc_probe,
+	.driver	= {
+		.name	= "jz4725b-bch",
+		.of_match_table = jz4725b_bch_dt_match,
+	},
+};
+module_platform_driver(jz4725b_bch_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
new file mode 100644
index 000000000000..13fea645c7f0
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4740 ECC controller driver
+ *
+ * Copyright (c) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * based on jz4740-nand.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define JZ_REG_NAND_ECC_CTRL	0x00
+#define JZ_REG_NAND_DATA	0x04
+#define JZ_REG_NAND_PAR0	0x08
+#define JZ_REG_NAND_PAR1	0x0C
+#define JZ_REG_NAND_PAR2	0x10
+#define JZ_REG_NAND_IRQ_STAT	0x14
+#define JZ_REG_NAND_IRQ_CTRL	0x18
+#define JZ_REG_NAND_ERR(x)	(0x1C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY	BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
+#define JZ_NAND_ECC_CTRL_RS		BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET		BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT	(BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH	BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH	BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH	BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR	BIT(1)
+#define JZ_NAND_STATUS_ERROR		BIT(0)
+
+static const uint8_t empty_block_ecc[] = {
+	0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f
+};
+
+static void jz4740_ecc_reset(struct ingenic_ecc *ecc, bool calc_ecc)
+{
+	uint32_t reg;
+
+	/* Clear interrupt status */
+	writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+
+	/* Initialize and enable ECC hardware */
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_RESET;
+	reg |= JZ_NAND_ECC_CTRL_ENABLE;
+	reg |= JZ_NAND_ECC_CTRL_RS;
+	if (calc_ecc) /* calculate ECC from data */
+		reg |= JZ_NAND_ECC_CTRL_ENCODING;
+	else /* correct data from ECC */
+		reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz4740_ecc_calculate(struct ingenic_ecc *ecc,
+				struct ingenic_ecc_params *params,
+				const u8 *buf, u8 *ecc_code)
+{
+	uint32_t reg, status;
+	unsigned int timeout = 1000;
+	int i;
+
+	jz4740_ecc_reset(ecc, true);
+
+	do {
+		status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	for (i = 0; i < params->bytes; ++i)
+		ecc_code[i] = readb(ecc->base + JZ_REG_NAND_PAR0 + i);
+
+	/*
+	 * If the written data is completely 0xff, we also want to write 0xff as
+	 * ECC, otherwise we will get in trouble when doing subpage writes.
+	 */
+	if (memcmp(ecc_code, empty_block_ecc, ARRAY_SIZE(empty_block_ecc)) == 0)
+		memset(ecc_code, 0xff, ARRAY_SIZE(empty_block_ecc));
+
+	return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *buf, int index, int mask)
+{
+	int offset = index & 0x7;
+	uint16_t data;
+
+	index += (index >> 3);
+
+	data = buf[index];
+	data |= buf[index + 1] << 8;
+
+	mask ^= (data >> offset) & 0x1ff;
+	data &= ~(0x1ff << offset);
+	data |= (mask << offset);
+
+	buf[index] = data & 0xff;
+	buf[index + 1] = (data >> 8) & 0xff;
+}
+
+static int jz4740_ecc_correct(struct ingenic_ecc *ecc,
+			      struct ingenic_ecc_params *params,
+			      u8 *buf, u8 *ecc_code)
+{
+	int i, error_count, index;
+	uint32_t reg, status, error;
+	unsigned int timeout = 1000;
+
+	jz4740_ecc_reset(ecc, false);
+
+	for (i = 0; i < params->bytes; ++i)
+		writeb(ecc_code[i], ecc->base + JZ_REG_NAND_PAR0 + i);
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	do {
+		status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	if (status & JZ_NAND_STATUS_ERROR) {
+		if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+			return -EBADMSG;
+
+		error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+		for (i = 0; i < error_count; ++i) {
+			error = readl(ecc->base + JZ_REG_NAND_ERR(i));
+			index = ((error >> 16) & 0x1ff) - 1;
+			if (index >= 0 && index < params->size)
+				jz_nand_correct_data(buf, index, error & 0x1ff);
+		}
+
+		return error_count;
+	}
+
+	return 0;
+}
+
+static void jz4740_ecc_disable(struct ingenic_ecc *ecc)
+{
+	u32 reg;
+
+	writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static const struct ingenic_ecc_ops jz4740_ecc_ops = {
+	.disable = jz4740_ecc_disable,
+	.calculate = jz4740_ecc_calculate,
+	.correct = jz4740_ecc_correct,
+};
+
+static const struct of_device_id jz4740_ecc_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-ecc", .data = &jz4740_ecc_ops },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4740_ecc_dt_match);
+
+static struct platform_driver jz4740_ecc_driver = {
+	.probe		= ingenic_ecc_probe,
+	.driver	= {
+		.name	= "jz4740-ecc",
+		.of_match_table = jz4740_ecc_dt_match,
+	},
+};
+module_platform_driver(jz4740_ecc_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4740 ECC controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
index 9526d5b23c80..f759f1672855 100644
--- a/drivers/mtd/nand/raw/jz4740_nand.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
@@ -313,8 +313,11 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
 	uint32_t ctrl;
 	struct nand_chip *chip = &nand->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	u8 id[2];
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/* Request I/O resource. */
 	sprintf(res_name, "bank%d", bank);
 	ret = jz_nand_ioremap_resource(pdev, res_name,
@@ -351,8 +354,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
 		}
 
 		/* Update size of the MTD. */
-		chip->numchips++;
-		mtd->size += chip->chipsize;
+		memorg->ntargets++;
+		mtd->size += nanddev_target_size(&chip->base);
 	}
 
 	dev_info(&pdev->dev, "Found chip %zu on bank %i\n", chipnr, bank);
diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
index c5f74ed85862..079266a0d6cf 100644
--- a/drivers/mtd/nand/raw/jz4780_bch.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
@@ -1,28 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * JZ4780 BCH controller
+ * JZ4780 BCH controller driver
  *
  * Copyright (c) 2015 Imagination Technologies
  * Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
  */
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
 
-#include "jz4780_bch.h"
+#include "ingenic_ecc.h"
 
 #define BCH_BHCR			0x0
 #define BCH_BHCCR			0x8
@@ -65,15 +59,8 @@
 /* Timeout for BCH calculation/correction. */
 #define BCH_TIMEOUT_US			100000
 
-struct jz4780_bch {
-	struct device *dev;
-	void __iomem *base;
-	struct clk *clk;
-	struct mutex lock;
-};
-
-static void jz4780_bch_init(struct jz4780_bch *bch,
-			    struct jz4780_bch_params *params, bool encode)
+static void jz4780_bch_reset(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params, bool encode)
 {
 	u32 reg;
 
@@ -93,13 +80,13 @@ static void jz4780_bch_init(struct jz4780_bch *bch,
 	writel(reg, bch->base + BCH_BHCR);
 }
 
-static void jz4780_bch_disable(struct jz4780_bch *bch)
+static void jz4780_bch_disable(struct ingenic_ecc *bch)
 {
 	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
 	writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
 }
 
-static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
+static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
 				  size_t size)
 {
 	size_t size32 = size / sizeof(u32);
@@ -116,7 +103,7 @@ static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
 		writeb(*src8++, bch->base + BCH_BHDR);
 }
 
-static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
+static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
 				   size_t size)
 {
 	size_t size32 = size / sizeof(u32);
@@ -146,7 +133,7 @@ static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
 	}
 }
 
-static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
+static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
 				     u32 *status)
 {
 	u32 reg;
@@ -170,23 +157,15 @@ static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
 	return true;
 }
 
-/**
- * jz4780_bch_calculate() - calculate ECC for a data buffer
- * @bch: BCH device.
- * @params: BCH parameters.
- * @buf: input buffer with raw data.
- * @ecc_code: output buffer with ECC.
- *
- * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
- * controller.
- */
-int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
-			 const u8 *buf, u8 *ecc_code)
+static int jz4780_calculate(struct ingenic_ecc *bch,
+			    struct ingenic_ecc_params *params,
+			    const u8 *buf, u8 *ecc_code)
 {
 	int ret = 0;
 
 	mutex_lock(&bch->lock);
-	jz4780_bch_init(bch, params, true);
+
+	jz4780_bch_reset(bch, params, true);
 	jz4780_bch_write_data(bch, buf, params->size);
 
 	if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
@@ -200,30 +179,17 @@ int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *param
 	mutex_unlock(&bch->lock);
 	return ret;
 }
-EXPORT_SYMBOL(jz4780_bch_calculate);
-
-/**
- * jz4780_bch_correct() - detect and correct bit errors
- * @bch: BCH device.
- * @params: BCH parameters.
- * @buf: raw data read from the chip.
- * @ecc_code: ECC read from the chip.
- *
- * Given the raw data and the ECC read from the NAND device, detects and
- * corrects errors in the data.
- *
- * Return: the number of bit errors corrected, -EBADMSG if there are too many
- * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
- */
-int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
-		       u8 *buf, u8 *ecc_code)
+
+static int jz4780_correct(struct ingenic_ecc *bch,
+			  struct ingenic_ecc_params *params,
+			  u8 *buf, u8 *ecc_code)
 {
 	u32 reg, mask, index;
 	int i, ret, count;
 
 	mutex_lock(&bch->lock);
 
-	jz4780_bch_init(bch, params, false);
+	jz4780_bch_reset(bch, params, false);
 	jz4780_bch_write_data(bch, buf, params->size);
 	jz4780_bch_write_data(bch, ecc_code, params->bytes);
 
@@ -262,110 +228,30 @@ out:
 	mutex_unlock(&bch->lock);
 	return ret;
 }
-EXPORT_SYMBOL(jz4780_bch_correct);
-
-/**
- * jz4780_bch_get() - get the BCH controller device
- * @np: BCH device tree node.
- *
- * Gets the BCH controller device from the specified device tree node. The
- * device must be released with jz4780_bch_release() when it is no longer being
- * used.
- *
- * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
- * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
- */
-static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
-{
-	struct platform_device *pdev;
-	struct jz4780_bch *bch;
-
-	pdev = of_find_device_by_node(np);
-	if (!pdev)
-		return ERR_PTR(-EPROBE_DEFER);
-
-	bch = platform_get_drvdata(pdev);
-	if (!bch) {
-		put_device(&pdev->dev);
-		return ERR_PTR(-EPROBE_DEFER);
-	}
-
-	clk_prepare_enable(bch->clk);
-
-	return bch;
-}
-
-/**
- * of_jz4780_bch_get() - get the BCH controller from a DT node
- * @of_node: the node that contains a bch-controller property.
- *
- * Get the bch-controller property from the given device tree
- * node and pass it to jz4780_bch_get to do the work.
- *
- * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
- * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
- */
-struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
-{
-	struct jz4780_bch *bch = NULL;
-	struct device_node *np;
-
-	np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
-
-	if (np) {
-		bch = jz4780_bch_get(np);
-		of_node_put(np);
-	}
-	return bch;
-}
-EXPORT_SYMBOL(of_jz4780_bch_get);
-
-/**
- * jz4780_bch_release() - release the BCH controller device
- * @bch: BCH device.
- */
-void jz4780_bch_release(struct jz4780_bch *bch)
-{
-	clk_disable_unprepare(bch->clk);
-	put_device(bch->dev);
-}
-EXPORT_SYMBOL(jz4780_bch_release);
 
 static int jz4780_bch_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct jz4780_bch *bch;
-	struct resource *res;
-
-	bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
-	if (!bch)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	bch->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(bch->base))
-		return PTR_ERR(bch->base);
-
-	jz4780_bch_disable(bch);
+	struct ingenic_ecc *bch;
+	int ret;
 
-	bch->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(bch->clk)) {
-		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
-		return PTR_ERR(bch->clk);
-	}
+	ret = ingenic_ecc_probe(pdev);
+	if (ret)
+		return ret;
 
+	bch = platform_get_drvdata(pdev);
 	clk_set_rate(bch->clk, BCH_CLK_RATE);
 
-	mutex_init(&bch->lock);
-
-	bch->dev = dev;
-	platform_set_drvdata(pdev, bch);
-
 	return 0;
 }
 
+static const struct ingenic_ecc_ops jz4780_bch_ops = {
+	.disable = jz4780_bch_disable,
+	.calculate = jz4780_calculate,
+	.correct = jz4780_correct,
+};
+
 static const struct of_device_id jz4780_bch_dt_match[] = {
-	{ .compatible = "ingenic,jz4780-bch" },
+	{ .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
 	{},
 };
 MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
index fbf6ca015cd7..cba6fe7dd8c4 100644
--- a/drivers/mtd/nand/raw/internals.h
+++ b/drivers/mtd/nand/raw/internals.h
@@ -76,6 +76,7 @@ extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
 
 /* Core functions */
 const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+int nand_bbm_get_next_page(struct nand_chip *chip, int page);
 int nand_markbad_bbm(struct nand_chip *chip, loff_t ofs);
 int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    int allowbbt);
@@ -110,7 +111,7 @@ static inline int nand_exec_op(struct nand_chip *chip,
 	if (!nand_has_exec_op(chip))
 		return -ENOTSUPP;
 
-	if (WARN_ON(op->cs >= chip->numchips))
+	if (WARN_ON(op->cs >= nanddev_ntargets(&chip->base)))
 		return -EINVAL;
 
 	return chip->controller->ops->exec_op(chip, op, false);
diff --git a/drivers/mtd/nand/raw/jz4780_bch.h b/drivers/mtd/nand/raw/jz4780_bch.h
deleted file mode 100644
index bf4718088a3a..000000000000
--- a/drivers/mtd/nand/raw/jz4780_bch.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * JZ4780 BCH controller
- *
- * Copyright (c) 2015 Imagination Technologies
- * Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
-#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
-
-#include <linux/types.h>
-
-struct device;
-struct device_node;
-struct jz4780_bch;
-
-/**
- * struct jz4780_bch_params - BCH parameters
- * @size: data bytes per ECC step.
- * @bytes: ECC bytes per step.
- * @strength: number of correctable bits per ECC step.
- */
-struct jz4780_bch_params {
-	int size;
-	int bytes;
-	int strength;
-};
-
-int jz4780_bch_calculate(struct jz4780_bch *bch,
-				struct jz4780_bch_params *params,
-				const u8 *buf, u8 *ecc_code);
-int jz4780_bch_correct(struct jz4780_bch *bch,
-			      struct jz4780_bch_params *params, u8 *buf,
-			      u8 *ecc_code);
-
-void jz4780_bch_release(struct jz4780_bch *bch);
-struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
-
-#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c
deleted file mode 100644
index 22e58975f0d5..000000000000
--- a/drivers/mtd/nand/raw/jz4780_nand.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * JZ4780 NAND driver
- *
- * Copyright (c) 2015 Imagination Technologies
- * Author: Alex Smith <alex.smith@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/gpio/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/jz4780-nemc.h>
-
-#include "jz4780_bch.h"
-
-#define DRV_NAME	"jz4780-nand"
-
-#define OFFSET_DATA	0x00000000
-#define OFFSET_CMD	0x00400000
-#define OFFSET_ADDR	0x00800000
-
-/* Command delay when there is no R/B pin. */
-#define RB_DELAY_US	100
-
-struct jz4780_nand_cs {
-	unsigned int bank;
-	void __iomem *base;
-};
-
-struct jz4780_nand_controller {
-	struct device *dev;
-	struct jz4780_bch *bch;
-	struct nand_controller controller;
-	unsigned int num_banks;
-	struct list_head chips;
-	int selected;
-	struct jz4780_nand_cs cs[];
-};
-
-struct jz4780_nand_chip {
-	struct nand_chip chip;
-	struct list_head chip_list;
-
-	struct gpio_desc *busy_gpio;
-	struct gpio_desc *wp_gpio;
-	unsigned int reading: 1;
-};
-
-static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
-{
-	return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
-}
-
-static inline struct jz4780_nand_controller
-*to_jz4780_nand_controller(struct nand_controller *ctrl)
-{
-	return container_of(ctrl, struct jz4780_nand_controller, controller);
-}
-
-static void jz4780_nand_select_chip(struct nand_chip *chip, int chipnr)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
-	struct jz4780_nand_cs *cs;
-
-	/* Ensure the currently selected chip is deasserted. */
-	if (chipnr == -1 && nfc->selected >= 0) {
-		cs = &nfc->cs[nfc->selected];
-		jz4780_nemc_assert(nfc->dev, cs->bank, false);
-	}
-
-	nfc->selected = chipnr;
-}
-
-static void jz4780_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				 unsigned int ctrl)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
-	struct jz4780_nand_cs *cs;
-
-	if (WARN_ON(nfc->selected < 0))
-		return;
-
-	cs = &nfc->cs[nfc->selected];
-
-	jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_ALE)
-		writeb(cmd, cs->base + OFFSET_ADDR);
-	else if (ctrl & NAND_CLE)
-		writeb(cmd, cs->base + OFFSET_CMD);
-}
-
-static int jz4780_nand_dev_ready(struct nand_chip *chip)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-
-	return !gpiod_get_value_cansleep(nand->busy_gpio);
-}
-
-static void jz4780_nand_ecc_hwctl(struct nand_chip *chip, int mode)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-
-	nand->reading = (mode == NAND_ECC_READ);
-}
-
-static int jz4780_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
-				     u8 *ecc_code)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
-	struct jz4780_bch_params params;
-
-	/*
-	 * Don't need to generate the ECC when reading, BCH does it for us as
-	 * part of decoding/correction.
-	 */
-	if (nand->reading)
-		return 0;
-
-	params.size = nand->chip.ecc.size;
-	params.bytes = nand->chip.ecc.bytes;
-	params.strength = nand->chip.ecc.strength;
-
-	return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
-}
-
-static int jz4780_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
-				   u8 *read_ecc, u8 *calc_ecc)
-{
-	struct jz4780_nand_chip *nand = to_jz4780_nand_chip(nand_to_mtd(chip));
-	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
-	struct jz4780_bch_params params;
-
-	params.size = nand->chip.ecc.size;
-	params.bytes = nand->chip.ecc.bytes;
-	params.strength = nand->chip.ecc.strength;
-
-	return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
-}
-
-static int jz4780_nand_attach_chip(struct nand_chip *chip)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
-	int eccbytes;
-
-	chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
-				(chip->ecc.strength / 8);
-
-	switch (chip->ecc.mode) {
-	case NAND_ECC_HW:
-		if (!nfc->bch) {
-			dev_err(nfc->dev,
-				"HW BCH selected, but BCH controller not found\n");
-			return -ENODEV;
-		}
-
-		chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
-		chip->ecc.calculate = jz4780_nand_ecc_calculate;
-		chip->ecc.correct = jz4780_nand_ecc_correct;
-		/* fall through */
-	case NAND_ECC_SOFT:
-		dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
-			 (nfc->bch) ? "hardware BCH" : "software ECC",
-			 chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
-		break;
-	case NAND_ECC_NONE:
-		dev_info(nfc->dev, "not using ECC\n");
-		break;
-	default:
-		dev_err(nfc->dev, "ECC mode %d not supported\n",
-			chip->ecc.mode);
-		return -EINVAL;
-	}
-
-	/* The NAND core will generate the ECC layout for SW ECC */
-	if (chip->ecc.mode != NAND_ECC_HW)
-		return 0;
-
-	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
-	eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
-
-	if (eccbytes > mtd->oobsize - 2) {
-		dev_err(nfc->dev,
-			"invalid ECC config: required %d ECC bytes, but only %d are available",
-			eccbytes, mtd->oobsize - 2);
-		return -EINVAL;
-	}
-
-	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
-
-	return 0;
-}
-
-static const struct nand_controller_ops jz4780_nand_controller_ops = {
-	.attach_chip = jz4780_nand_attach_chip,
-};
-
-static int jz4780_nand_init_chip(struct platform_device *pdev,
-				struct jz4780_nand_controller *nfc,
-				struct device_node *np,
-				unsigned int chipnr)
-{
-	struct device *dev = &pdev->dev;
-	struct jz4780_nand_chip *nand;
-	struct jz4780_nand_cs *cs;
-	struct resource *res;
-	struct nand_chip *chip;
-	struct mtd_info *mtd;
-	const __be32 *reg;
-	int ret = 0;
-
-	cs = &nfc->cs[chipnr];
-
-	reg = of_get_property(np, "reg", NULL);
-	if (!reg)
-		return -EINVAL;
-
-	cs->bank = be32_to_cpu(*reg);
-
-	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
-	cs->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(cs->base))
-		return PTR_ERR(cs->base);
-
-	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
-	if (!nand)
-		return -ENOMEM;
-
-	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
-
-	if (IS_ERR(nand->busy_gpio)) {
-		ret = PTR_ERR(nand->busy_gpio);
-		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
-		return ret;
-	} else if (nand->busy_gpio) {
-		nand->chip.legacy.dev_ready = jz4780_nand_dev_ready;
-	}
-
-	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
-
-	if (IS_ERR(nand->wp_gpio)) {
-		ret = PTR_ERR(nand->wp_gpio);
-		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
-		return ret;
-	}
-
-	chip = &nand->chip;
-	mtd = nand_to_mtd(chip);
-	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
-				   cs->bank);
-	if (!mtd->name)
-		return -ENOMEM;
-	mtd->dev.parent = dev;
-
-	chip->legacy.IO_ADDR_R = cs->base + OFFSET_DATA;
-	chip->legacy.IO_ADDR_W = cs->base + OFFSET_DATA;
-	chip->legacy.chip_delay = RB_DELAY_US;
-	chip->options = NAND_NO_SUBPAGE_WRITE;
-	chip->legacy.select_chip = jz4780_nand_select_chip;
-	chip->legacy.cmd_ctrl = jz4780_nand_cmd_ctrl;
-	chip->ecc.mode = NAND_ECC_HW;
-	chip->controller = &nfc->controller;
-	nand_set_flash_node(chip, np);
-
-	chip->controller->ops = &jz4780_nand_controller_ops;
-	ret = nand_scan(chip, 1);
-	if (ret)
-		return ret;
-
-	ret = mtd_device_register(mtd, NULL, 0);
-	if (ret) {
-		nand_release(chip);
-		return ret;
-	}
-
-	list_add_tail(&nand->chip_list, &nfc->chips);
-
-	return 0;
-}
-
-static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
-{
-	struct jz4780_nand_chip *chip;
-
-	while (!list_empty(&nfc->chips)) {
-		chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
-		nand_release(&chip->chip);
-		list_del(&chip->chip_list);
-	}
-}
-
-static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
-				  struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *np;
-	int i = 0;
-	int ret;
-	int num_chips = of_get_child_count(dev->of_node);
-
-	if (num_chips > nfc->num_banks) {
-		dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
-		return -EINVAL;
-	}
-
-	for_each_child_of_node(dev->of_node, np) {
-		ret = jz4780_nand_init_chip(pdev, nfc, np, i);
-		if (ret) {
-			jz4780_nand_cleanup_chips(nfc);
-			return ret;
-		}
-
-		i++;
-	}
-
-	return 0;
-}
-
-static int jz4780_nand_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	unsigned int num_banks;
-	struct jz4780_nand_controller *nfc;
-	int ret;
-
-	num_banks = jz4780_nemc_num_banks(dev);
-	if (num_banks == 0) {
-		dev_err(dev, "no banks found\n");
-		return -ENODEV;
-	}
-
-	nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
-	if (!nfc)
-		return -ENOMEM;
-
-	/*
-	 * Check for BCH HW before we call nand_scan_ident, to prevent us from
-	 * having to call it again if the BCH driver returns -EPROBE_DEFER.
-	 */
-	nfc->bch = of_jz4780_bch_get(dev->of_node);
-	if (IS_ERR(nfc->bch))
-		return PTR_ERR(nfc->bch);
-
-	nfc->dev = dev;
-	nfc->num_banks = num_banks;
-
-	nand_controller_init(&nfc->controller);
-	INIT_LIST_HEAD(&nfc->chips);
-
-	ret = jz4780_nand_init_chips(nfc, pdev);
-	if (ret) {
-		if (nfc->bch)
-			jz4780_bch_release(nfc->bch);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, nfc);
-	return 0;
-}
-
-static int jz4780_nand_remove(struct platform_device *pdev)
-{
-	struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
-
-	if (nfc->bch)
-		jz4780_bch_release(nfc->bch);
-
-	jz4780_nand_cleanup_chips(nfc);
-
-	return 0;
-}
-
-static const struct of_device_id jz4780_nand_dt_match[] = {
-	{ .compatible = "ingenic,jz4780-nand" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
-
-static struct platform_driver jz4780_nand_driver = {
-	.probe		= jz4780_nand_probe,
-	.remove		= jz4780_nand_remove,
-	.driver	= {
-		.name	= DRV_NAME,
-		.of_match_table = of_match_ptr(jz4780_nand_dt_match),
-	},
-};
-module_platform_driver(jz4780_nand_driver);
-
-MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
-MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
-MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f38e5c1b87e4..0d29b5d6bcd5 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -1083,12 +1083,11 @@ static int marvell_nfc_hw_ecc_hmg_read_page(struct nand_chip *chip, u8 *buf,
  */
 static int marvell_nfc_hw_ecc_hmg_read_oob_raw(struct nand_chip *chip, int page)
 {
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
+	u8 *buf = nand_get_data_buf(chip);
 
 	marvell_nfc_select_target(chip, chip->cur_cs);
-	return marvell_nfc_hw_ecc_hmg_do_read_page(chip, chip->data_buf,
-						   chip->oob_poi, true, page);
+	return marvell_nfc_hw_ecc_hmg_do_read_page(chip, buf, chip->oob_poi,
+						   true, page);
 }
 
 /* Hamming write helpers */
@@ -1179,15 +1178,13 @@ static int marvell_nfc_hw_ecc_hmg_write_oob_raw(struct nand_chip *chip,
 						int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
 
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
-
-	memset(chip->data_buf, 0xFF, mtd->writesize);
+	memset(buf, 0xFF, mtd->writesize);
 
 	marvell_nfc_select_target(chip, chip->cur_cs);
-	return marvell_nfc_hw_ecc_hmg_do_write_page(chip, chip->data_buf,
-						    chip->oob_poi, true, page);
+	return marvell_nfc_hw_ecc_hmg_do_write_page(chip, buf, chip->oob_poi,
+						    true, page);
 }
 
 /* BCH read helpers */
@@ -1434,18 +1431,16 @@ static int marvell_nfc_hw_ecc_bch_read_page(struct nand_chip *chip,
 
 static int marvell_nfc_hw_ecc_bch_read_oob_raw(struct nand_chip *chip, int page)
 {
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
+	u8 *buf = nand_get_data_buf(chip);
 
-	return chip->ecc.read_page_raw(chip, chip->data_buf, true, page);
+	return chip->ecc.read_page_raw(chip, buf, true, page);
 }
 
 static int marvell_nfc_hw_ecc_bch_read_oob(struct nand_chip *chip, int page)
 {
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
+	u8 *buf = nand_get_data_buf(chip);
 
-	return chip->ecc.read_page(chip, chip->data_buf, true, page);
+	return chip->ecc.read_page(chip, buf, true, page);
 }
 
 /* BCH write helpers */
@@ -1619,25 +1614,21 @@ static int marvell_nfc_hw_ecc_bch_write_oob_raw(struct nand_chip *chip,
 						int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
 
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
-
-	memset(chip->data_buf, 0xFF, mtd->writesize);
+	memset(buf, 0xFF, mtd->writesize);
 
-	return chip->ecc.write_page_raw(chip, chip->data_buf, true, page);
+	return chip->ecc.write_page_raw(chip, buf, true, page);
 }
 
 static int marvell_nfc_hw_ecc_bch_write_oob(struct nand_chip *chip, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *buf = nand_get_data_buf(chip);
 
-	/* Invalidate page cache */
-	chip->pagebuf = -1;
-
-	memset(chip->data_buf, 0xFF, mtd->writesize);
+	memset(buf, 0xFF, mtd->writesize);
 
-	return chip->ecc.write_page(chip, chip->data_buf, true, page);
+	return chip->ecc.write_page(chip, buf, true, page);
 }
 
 /* NAND framework ->exec_op() hooks and related helpers */
@@ -2257,9 +2248,9 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
 	int ret;
 
 	if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
-		if (chip->ecc_step_ds && chip->ecc_strength_ds) {
-			ecc->size = chip->ecc_step_ds;
-			ecc->strength = chip->ecc_strength_ds;
+		if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+			ecc->size = chip->base.eccreq.step_size;
+			ecc->strength = chip->base.eccreq.strength;
 		} else {
 			dev_info(nfc->dev,
 				 "No minimum ECC strength, using 1b/512B\n");
@@ -2989,7 +2980,7 @@ static int __maybe_unused marvell_nfc_resume(struct device *dev)
 
 	/*
 	 * Reset nfc->selected_chip so the next command will cause the timing
-	 * registers to be restored in marvell_nfc_select_chip().
+	 * registers to be restored in marvell_nfc_select_target().
 	 */
 	nfc->selected_chip = NULL;
 
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3e8aa71407b5..ea57ddcec41e 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -400,7 +400,7 @@ static int meson_nfc_queue_rb(struct meson_nfc *nfc, int timeout_ms)
 	cfg |= NFC_RB_IRQ_EN;
 	writel(cfg, nfc->reg_base + NFC_REG_CFG);
 
-	init_completion(&nfc->completion);
+	reinit_completion(&nfc->completion);
 
 	/* use the max erase time as the maximum clock for waiting R/B */
 	cmd = NFC_CMD_RB | NFC_CMD_RB_INT
@@ -470,15 +470,15 @@ static int meson_nfc_ecc_correct(struct nand_chip *nand, u32 *bitflips,
 	return ret;
 }
 
-static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, u8 *databuf,
-				      int datalen, u8 *infobuf, int infolen,
+static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
+				      int datalen, void *infobuf, int infolen,
 				      enum dma_data_direction dir)
 {
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 	u32 cmd;
 	int ret = 0;
 
-	nfc->daddr = dma_map_single(nfc->dev, (void *)databuf, datalen, dir);
+	nfc->daddr = dma_map_single(nfc->dev, databuf, datalen, dir);
 	ret = dma_mapping_error(nfc->dev, nfc->daddr);
 	if (ret) {
 		dev_err(nfc->dev, "DMA mapping error\n");
@@ -528,10 +528,13 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
 	u8 *info;
 
 	info = kzalloc(PER_INFO_BYTE, GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	ret = meson_nfc_dma_buffer_setup(nand, buf, len, info,
 					 PER_INFO_BYTE, DMA_FROM_DEVICE);
 	if (ret)
-		return ret;
+		goto out;
 
 	cmd = NFC_CMD_N2M | (len & GENMASK(5, 0));
 	writel(cmd, nfc->reg_base + NFC_REG_CMD);
@@ -539,6 +542,8 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
 	meson_nfc_drain_cmd(nfc);
 	meson_nfc_wait_cmd_finish(nfc, 1000);
 	meson_nfc_dma_buffer_release(nand, len, PER_INFO_BYTE, DMA_FROM_DEVICE);
+
+out:
 	kfree(info);
 
 	return ret;
@@ -640,7 +645,7 @@ static int meson_nfc_write_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_TO_DEVICE);
 	if (ret)
 		return ret;
@@ -724,7 +729,7 @@ static int meson_nfc_read_page_sub(struct nand_chip *nand,
 		return ret;
 
 	ret = meson_nfc_dma_buffer_setup(nand, meson_chip->data_buf,
-					 data_len, (u8 *)meson_chip->info_buf,
+					 data_len, meson_chip->info_buf,
 					 info_len, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
@@ -1183,6 +1188,8 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
 		return -EINVAL;
 	}
 
+	mtd_set_ooblayout(mtd, &meson_ooblayout_ops);
+
 	ret = meson_nand_bch_mode(nand);
 	if (ret)
 		return -EINVAL;
@@ -1226,17 +1233,13 @@ meson_nfc_nand_chip_init(struct device *dev,
 	int ret, i;
 	u32 tmp, nsels;
 
-	if (!of_get_property(np, "reg", &nsels))
-		return -EINVAL;
-
-	nsels /= sizeof(u32);
+	nsels = of_property_count_elems_of_size(np, "reg", sizeof(u32));
 	if (!nsels || nsels > MAX_CE_NUM) {
 		dev_err(dev, "invalid register property size\n");
 		return -EINVAL;
 	}
 
-	meson_chip = devm_kzalloc(dev,
-				  sizeof(*meson_chip) + (nsels * sizeof(u8)),
+	meson_chip = devm_kzalloc(dev, struct_size(meson_chip, sels, nsels),
 				  GFP_KERNEL);
 	if (!meson_chip)
 		return -ENOMEM;
@@ -1377,6 +1380,7 @@ static int meson_nfc_probe(struct platform_device *pdev)
 
 	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
+	init_completion(&nfc->completion);
 
 	nfc->dev = dev;
 
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 2c0e09187773..b17619f30b1b 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1197,8 +1197,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 	/* if optional dt settings not present */
 	if (!nand->ecc.size || !nand->ecc.strength) {
 		/* use datasheet requirements */
-		nand->ecc.strength = nand->ecc_strength_ds;
-		nand->ecc.size = nand->ecc_step_ds;
+		nand->ecc.strength = nand->base.eccreq.strength;
+		nand->ecc.size = nand->base.eccreq.step_size;
 
 		/*
 		 * align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c
index 890c5b43e03c..6217555c19a6 100644
--- a/drivers/mtd/nand/raw/nand_amd.c
+++ b/drivers/mtd/nand/raw/nand_amd.c
@@ -20,6 +20,9 @@
 static void amd_nand_decode_id(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+
+	memorg = nanddev_get_memorg(&chip->base);
 
 	nand_decode_ext_id(chip);
 
@@ -31,16 +34,24 @@ static void amd_nand_decode_id(struct nand_chip *chip)
 	 */
 	if (chip->id.data[4] != 0x00 && chip->id.data[5] == 0x00 &&
 	    chip->id.data[6] == 0x00 && chip->id.data[7] == 0x00 &&
-	    mtd->writesize == 512) {
-		mtd->erasesize = 128 * 1024;
-		mtd->erasesize <<= ((chip->id.data[3] & 0x03) << 1);
+	    memorg->pagesize == 512) {
+		memorg->pages_per_eraseblock = 256;
+		memorg->pages_per_eraseblock <<= ((chip->id.data[3] & 0x03) << 1);
+		mtd->erasesize = memorg->pages_per_eraseblock *
+				 memorg->pagesize;
 	}
 }
 
 static int amd_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		/*
+		 * According to the datasheet of some Cypress SLC NANDs,
+		 * the bad block markers can be in the first, second or last
+		 * page of a block. So let's check all three locations.
+		 */
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+				 NAND_BBM_LASTPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index ddd396e93e32..2cf71060d6f8 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -240,10 +240,10 @@ static int check_offs_len(struct nand_chip *chip, loff_t ofs, uint64_t len)
 void nand_select_target(struct nand_chip *chip, unsigned int cs)
 {
 	/*
-	 * cs should always lie between 0 and chip->numchips, when that's not
-	 * the case it's a bug and the caller should be fixed.
+	 * cs should always lie between 0 and nanddev_ntargets(), when that's
+	 * not the case it's a bug and the caller should be fixed.
 	 */
-	if (WARN_ON(cs > chip->numchips))
+	if (WARN_ON(cs > nanddev_ntargets(&chip->base)))
 		return;
 
 	chip->cur_cs = cs;
@@ -283,6 +283,31 @@ static void nand_release_device(struct nand_chip *chip)
 }
 
 /**
+ * nand_bbm_get_next_page - Get the next page for bad block markers
+ * @chip: NAND chip object
+ * @page: First page to start checking for bad block marker usage
+ *
+ * Returns an integer that corresponds to the page offset within a block, for
+ * a page that is used to store bad block markers. If no more pages are
+ * available, -EINVAL is returned.
+ */
+int nand_bbm_get_next_page(struct nand_chip *chip, int page)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int last_page = ((mtd->erasesize - mtd->writesize) >>
+			 chip->page_shift) & chip->pagemask;
+
+	if (page == 0 && chip->options & NAND_BBM_FIRSTPAGE)
+		return 0;
+	else if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
+		return 1;
+	else if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
+		return last_page;
+
+	return -EINVAL;
+}
+
+/**
  * nand_block_bad - [DEFAULT] Read bad block marker from the chip
  * @chip: NAND chip object
  * @ofs: offset from device start
@@ -291,18 +316,15 @@ static void nand_release_device(struct nand_chip *chip)
  */
 static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
 {
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	int page, page_end, res;
+	int first_page, page_offset;
+	int res;
 	u8 bad;
 
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
-		ofs += mtd->erasesize - mtd->writesize;
-
-	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
-	page_end = page + (chip->bbt_options & NAND_BBT_SCAN2NDPAGE ? 2 : 1);
+	first_page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+	page_offset = nand_bbm_get_next_page(chip, 0);
 
-	for (; page < page_end; page++) {
-		res = chip->ecc.read_oob(chip, page);
+	while (page_offset >= 0) {
+		res = chip->ecc.read_oob(chip, first_page + page_offset);
 		if (res < 0)
 			return res;
 
@@ -314,6 +336,8 @@ static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
 			res = hweight8(bad) < chip->badblockbits;
 		if (res)
 			return res;
+
+		page_offset = nand_bbm_get_next_page(chip, page_offset + 1);
 	}
 
 	return 0;
@@ -459,8 +483,8 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
 	}
 
 	/* Invalidate the page cache, if we write to the cached page */
-	if (page == chip->pagebuf)
-		chip->pagebuf = -1;
+	if (page == chip->pagecache.page)
+		chip->pagecache.page = -1;
 
 	nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
 
@@ -493,7 +517,7 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mtd_oob_ops ops;
 	uint8_t buf[2] = { 0, 0 };
-	int ret = 0, res, i = 0;
+	int ret = 0, res, page_offset;
 
 	memset(&ops, 0, sizeof(ops));
 	ops.oobbuf = buf;
@@ -506,17 +530,18 @@ static int nand_default_block_markbad(struct nand_chip *chip, loff_t ofs)
 	}
 	ops.mode = MTD_OPS_PLACE_OOB;
 
-	/* Write to first/last page(s) if necessary */
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
-		ofs += mtd->erasesize - mtd->writesize;
-	do {
-		res = nand_do_write_oob(chip, ofs, &ops);
+	page_offset = nand_bbm_get_next_page(chip, 0);
+
+	while (page_offset >= 0) {
+		res = nand_do_write_oob(chip,
+					ofs + (page_offset * mtd->writesize),
+					&ops);
+
 		if (!ret)
 			ret = res;
 
-		i++;
-		ofs += mtd->writesize;
-	} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+		page_offset = nand_bbm_get_next_page(chip, page_offset + 1);
+	}
 
 	return ret;
 }
@@ -3173,7 +3198,7 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
 			use_bufpoi = 0;
 
 		/* Is the current page in the buffer? */
-		if (realpage != chip->pagebuf || oob) {
+		if (realpage != chip->pagecache.page || oob) {
 			bufpoi = use_bufpoi ? chip->data_buf : buf;
 
 			if (use_bufpoi && aligned)
@@ -3199,7 +3224,7 @@ read_retry:
 			if (ret < 0) {
 				if (use_bufpoi)
 					/* Invalidate page cache */
-					chip->pagebuf = -1;
+					chip->pagecache.page = -1;
 				break;
 			}
 
@@ -3208,11 +3233,11 @@ read_retry:
 				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
 				    !(mtd->ecc_stats.failed - ecc_failures) &&
 				    (ops->mode != MTD_OPS_RAW)) {
-					chip->pagebuf = realpage;
-					chip->pagebuf_bitflips = ret;
+					chip->pagecache.page = realpage;
+					chip->pagecache.bitflips = ret;
 				} else {
 					/* Invalidate page cache */
-					chip->pagebuf = -1;
+					chip->pagecache.page = -1;
 				}
 				memcpy(buf, chip->data_buf + col, bytes);
 			}
@@ -3252,7 +3277,7 @@ read_retry:
 			memcpy(buf, chip->data_buf + col, bytes);
 			buf += bytes;
 			max_bitflips = max_t(unsigned int, max_bitflips,
-					     chip->pagebuf_bitflips);
+					     chip->pagecache.bitflips);
 		}
 
 		readlen -= bytes;
@@ -3973,9 +3998,9 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
 	page = realpage & chip->pagemask;
 
 	/* Invalidate the page cache, when we write to the cached page */
-	if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
-	    ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
-		chip->pagebuf = -1;
+	if (to <= ((loff_t)chip->pagecache.page << chip->page_shift) &&
+	    ((loff_t)chip->pagecache.page << chip->page_shift) < (to + ops->len))
+		chip->pagecache.page = -1;
 
 	/* Don't allow multipage oob writes with offset */
 	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
@@ -4004,10 +4029,9 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
 					 __func__, buf);
 			if (part_pagewr)
 				bytes = min_t(int, bytes - column, writelen);
-			chip->pagebuf = -1;
-			memset(chip->data_buf, 0xff, mtd->writesize);
-			memcpy(&chip->data_buf[column], buf, bytes);
-			wbuf = chip->data_buf;
+			wbuf = nand_get_data_buf(chip);
+			memset(wbuf, 0xff, mtd->writesize);
+			memcpy(&wbuf[column], buf, bytes);
 		}
 
 		if (unlikely(oob)) {
@@ -4197,9 +4221,9 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		 * Invalidate the page cache, if we erase the block which
 		 * contains the current cached page.
 		 */
-		if (page <= chip->pagebuf && chip->pagebuf <
+		if (page <= chip->pagecache.page && chip->pagecache.page <
 		    (page + pages_per_block))
-			chip->pagebuf = -1;
+			chip->pagecache.page = -1;
 
 		ret = nand_erase_op(chip, (page & chip->pagemask) >>
 				    (chip->phys_erase_shift - chip->page_shift));
@@ -4299,42 +4323,6 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 }
 
 /**
- * nand_max_bad_blocks - [MTD Interface] Max number of bad blocks for an mtd
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
- * @len: length of mtd
- */
-static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	u32 part_start_block;
-	u32 part_end_block;
-	u32 part_start_die;
-	u32 part_end_die;
-
-	/*
-	 * max_bb_per_die and blocks_per_die used to determine
-	 * the maximum bad block count.
-	 */
-	if (!chip->max_bb_per_die || !chip->blocks_per_die)
-		return -ENOTSUPP;
-
-	/* Get the start and end of the partition in erase blocks. */
-	part_start_block = mtd_div_by_eb(ofs, mtd);
-	part_end_block = mtd_div_by_eb(len, mtd) + part_start_block - 1;
-
-	/* Get the start and end LUNs of the partition. */
-	part_start_die = part_start_block / chip->blocks_per_die;
-	part_end_die = part_end_block / chip->blocks_per_die;
-
-	/*
-	 * Look up the bad blocks per unit and multiply by the number of units
-	 * that the partition spans.
-	 */
-	return chip->max_bb_per_die * (part_end_die - part_start_die + 1);
-}
-
-/**
  * nand_suspend - [MTD Interface] Suspend the NAND flash
  * @mtd: MTD device structure
  */
@@ -4485,21 +4473,29 @@ static int nand_get_bits_per_cell(u8 cellinfo)
  */
 void nand_decode_ext_id(struct nand_chip *chip)
 {
+	struct nand_memory_organization *memorg;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int extid;
 	u8 *id_data = chip->id.data;
+
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/* The 3rd id byte holds MLC / multichip data */
-	chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+	memorg->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
 	/* The 4th id byte is the important one */
 	extid = id_data[3];
 
 	/* Calc pagesize */
-	mtd->writesize = 1024 << (extid & 0x03);
+	memorg->pagesize = 1024 << (extid & 0x03);
+	mtd->writesize = memorg->pagesize;
 	extid >>= 2;
 	/* Calc oobsize */
-	mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+	memorg->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+	mtd->oobsize = memorg->oobsize;
 	extid >>= 2;
 	/* Calc blocksize. Blocksize is multiples of 64KiB */
+	memorg->pages_per_eraseblock = ((64 * 1024) << (extid & 0x03)) /
+				       memorg->pagesize;
 	mtd->erasesize = (64 * 1024) << (extid & 0x03);
 	extid >>= 2;
 	/* Get buswidth information */
@@ -4516,13 +4512,19 @@ EXPORT_SYMBOL_GPL(nand_decode_ext_id);
 static void nand_decode_id(struct nand_chip *chip, struct nand_flash_dev *type)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+
+	memorg = nanddev_get_memorg(&chip->base);
 
+	memorg->pages_per_eraseblock = type->erasesize / type->pagesize;
 	mtd->erasesize = type->erasesize;
-	mtd->writesize = type->pagesize;
-	mtd->oobsize = mtd->writesize / 32;
+	memorg->pagesize = type->pagesize;
+	mtd->writesize = memorg->pagesize;
+	memorg->oobsize = memorg->pagesize / 32;
+	mtd->oobsize = memorg->oobsize;
 
 	/* All legacy ID NAND are small-page, SLC */
-	chip->bits_per_cell = 1;
+	memorg->bits_per_cell = 1;
 }
 
 /*
@@ -4536,9 +4538,9 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
 
 	/* Set the bad block position */
 	if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
-		chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+		chip->badblockpos = NAND_BBM_POS_LARGE;
 	else
-		chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+		chip->badblockpos = NAND_BBM_POS_SMALL;
 }
 
 static inline bool is_full_id_nand(struct nand_flash_dev *type)
@@ -4550,18 +4552,28 @@ static bool find_full_id_nand(struct nand_chip *chip,
 			      struct nand_flash_dev *type)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	u8 *id_data = chip->id.data;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	if (!strncmp(type->id, id_data, type->id_len)) {
-		mtd->writesize = type->pagesize;
+		memorg->pagesize = type->pagesize;
+		mtd->writesize = memorg->pagesize;
+		memorg->pages_per_eraseblock = type->erasesize /
+					       type->pagesize;
 		mtd->erasesize = type->erasesize;
-		mtd->oobsize = type->oobsize;
-
-		chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
-		chip->chipsize = (uint64_t)type->chipsize << 20;
+		memorg->oobsize = type->oobsize;
+		mtd->oobsize = memorg->oobsize;
+
+		memorg->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+		memorg->eraseblocks_per_lun =
+			DIV_ROUND_DOWN_ULL((u64)type->chipsize << 20,
+					   memorg->pagesize *
+					   memorg->pages_per_eraseblock);
 		chip->options |= type->options;
-		chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
-		chip->ecc_step_ds = NAND_ECC_STEP(type);
+		chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
+		chip->base.eccreq.step_size = NAND_ECC_STEP(type);
 		chip->onfi_timing_mode_default =
 					type->onfi_timing_mode_default;
 
@@ -4587,8 +4599,12 @@ static void nand_manufacturer_detect(struct nand_chip *chip)
 	 */
 	if (chip->manufacturer.desc && chip->manufacturer.desc->ops &&
 	    chip->manufacturer.desc->ops->detect) {
+		struct nand_memory_organization *memorg;
+
+		memorg = nanddev_get_memorg(&chip->base);
+
 		/* The 3rd id byte holds MLC / multichip data */
-		chip->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]);
+		memorg->bits_per_cell = nand_get_bits_per_cell(chip->id.data[2]);
 		chip->manufacturer.desc->ops->detect(chip);
 	} else {
 		nand_decode_ext_id(chip);
@@ -4637,9 +4653,20 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
 {
 	const struct nand_manufacturer *manufacturer;
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	int busw, ret;
 	u8 *id_data = chip->id.data;
 	u8 maf_id, dev_id;
+	u64 targetsize;
+
+	/*
+	 * Let's start by initializing memorg fields that might be left
+	 * unassigned by the ID-based detection logic.
+	 */
+	memorg = nanddev_get_memorg(&chip->base);
+	memorg->planes_per_lun = 1;
+	memorg->luns_per_target = 1;
+	memorg->ntargets = 1;
 
 	/*
 	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
@@ -4735,8 +4762,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
 	if (!chip->parameters.model)
 		return -ENOMEM;
 
-	chip->chipsize = (uint64_t)type->chipsize << 20;
-
 	if (!type->pagesize)
 		nand_manufacturer_detect(chip);
 	else
@@ -4745,6 +4770,11 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
 	/* Get chip options */
 	chip->options |= type->options;
 
+	memorg->eraseblocks_per_lun =
+			DIV_ROUND_DOWN_ULL((u64)type->chipsize << 20,
+					   memorg->pagesize *
+					   memorg->pages_per_eraseblock);
+
 ident_done:
 	if (!mtd->name)
 		mtd->name = chip->parameters.model;
@@ -4773,14 +4803,15 @@ ident_done:
 	/* Calculate the address shift from the page size */
 	chip->page_shift = ffs(mtd->writesize) - 1;
 	/* Convert chipsize to number of pages per chip -1 */
-	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+	targetsize = nanddev_target_size(&chip->base);
+	chip->pagemask = (targetsize >> chip->page_shift) - 1;
 
 	chip->bbt_erase_shift = chip->phys_erase_shift =
 		ffs(mtd->erasesize) - 1;
-	if (chip->chipsize & 0xffffffff)
-		chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
+	if (targetsize & 0xffffffff)
+		chip->chip_shift = ffs((unsigned)targetsize) - 1;
 	else {
-		chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+		chip->chip_shift = ffs((unsigned)(targetsize >> 32));
 		chip->chip_shift += 32 - 1;
 	}
 
@@ -4796,7 +4827,7 @@ ident_done:
 	pr_info("%s %s\n", nand_manufacturer_name(manufacturer),
 		chip->parameters.model);
 	pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
-		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
+		(int)(targetsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
 		mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
 	return 0;
 
@@ -4971,10 +5002,13 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 			   struct nand_flash_dev *table)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	int nand_maf_id, nand_dev_id;
 	unsigned int i;
 	int ret;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/* Assume all dies are deselected when we enter nand_scan_ident(). */
 	chip->cur_cs = -1;
 
@@ -4990,12 +5024,6 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 	if (!mtd->name && mtd->dev.parent)
 		mtd->name = dev_name(mtd->dev.parent);
 
-	/*
-	 * Start with chips->numchips = maxchips to let nand_select_target() do
-	 * its job. chip->numchips will be adjusted after.
-	 */
-	chip->numchips = maxchips;
-
 	/* Set the default functions */
 	nand_set_defaults(chip);
 
@@ -5042,8 +5070,8 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 		pr_info("%d chips detected\n", i);
 
 	/* Store the number of chips and calc total size for mtd */
-	chip->numchips = i;
-	mtd->size = i * chip->chipsize;
+	memorg->ntargets = i;
+	mtd->size = i * nanddev_target_size(&chip->base);
 
 	return 0;
 }
@@ -5078,13 +5106,13 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 		ecc->bytes = 3;
 		ecc->strength = 1;
 
-		if (IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC))
+		if (IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC))
 			ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
 
 		return 0;
 	case NAND_ECC_BCH:
 		if (!mtd_nand_has_bch()) {
-			WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+			WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
 			return -EINVAL;
 		}
 		ecc->calculate = nand_bch_calculate_ecc;
@@ -5224,8 +5252,8 @@ nand_match_ecc_req(struct nand_chip *chip,
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	const struct nand_ecc_step_info *stepinfo;
-	int req_step = chip->ecc_step_ds;
-	int req_strength = chip->ecc_strength_ds;
+	int req_step = chip->base.eccreq.step_size;
+	int req_strength = chip->base.eccreq.strength;
 	int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
 	int best_step, best_strength, best_ecc_bytes;
 	int best_ecc_bytes_total = INT_MAX;
@@ -5418,7 +5446,7 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int corr, ds_corr;
 
-	if (ecc->size == 0 || chip->ecc_step_ds == 0)
+	if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
 		/* Not enough information */
 		return true;
 
@@ -5427,11 +5455,56 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
 	 * the correction density.
 	 */
 	corr = (mtd->writesize * ecc->strength) / ecc->size;
-	ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+	ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
+		  chip->base.eccreq.step_size;
 
-	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+	return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
 }
 
+static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+	unsigned int eb = nanddev_pos_to_row(nand, pos);
+	int ret;
+
+	eb >>= nand->rowconv.eraseblock_addr_shift;
+
+	nand_select_target(chip, pos->target);
+	ret = nand_erase_op(chip, eb);
+	nand_deselect_target(chip);
+
+	return ret;
+}
+
+static int rawnand_markbad(struct nand_device *nand,
+			   const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+
+	return nand_markbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+}
+
+static bool rawnand_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+	int ret;
+
+	nand_select_target(chip, pos->target);
+	ret = nand_isbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+	nand_deselect_target(chip);
+
+	return ret;
+}
+
+static const struct nand_ops rawnand_ops = {
+	.erase = rawnand_erase,
+	.markbad = rawnand_markbad,
+	.isbad = rawnand_isbad,
+};
+
 /**
  * nand_scan_tail - Scan for the NAND device
  * @chip: NAND chip object
@@ -5687,7 +5760,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 	chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
 
 	/* Invalidate the pagebuffer reference */
-	chip->pagebuf = -1;
+	chip->pagecache.page = -1;
 
 	/* Large page NAND with SOFT_ECC should support subpage reads */
 	switch (ecc->mode) {
@@ -5700,10 +5773,15 @@ static int nand_scan_tail(struct nand_chip *chip)
 		break;
 	}
 
+	ret = nanddev_init(&chip->base, &rawnand_ops, mtd->owner);
+	if (ret)
+		goto err_nand_manuf_cleanup;
+
+	/* Adjust the MTD_CAP_ flags when NAND_ROM is set. */
+	if (chip->options & NAND_ROM)
+		mtd->flags = MTD_CAP_ROM;
+
 	/* Fill in remaining MTD driver data */
-	mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
-	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
-						MTD_CAP_NANDFLASH;
 	mtd->_erase = nand_erase;
 	mtd->_point = NULL;
 	mtd->_unpoint = NULL;
@@ -5719,8 +5797,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 	mtd->_block_isreserved = nand_block_isreserved;
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
-	mtd->_max_bad_blocks = nand_max_bad_blocks;
-	mtd->writebufsize = mtd->writesize;
+	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
 
 	/*
 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
@@ -5733,13 +5810,13 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Initialize the ->data_interface field. */
 	ret = nand_init_data_interface(chip);
 	if (ret)
-		goto err_nand_manuf_cleanup;
+		goto err_nanddev_cleanup;
 
 	/* Enter fastest possible mode on all dies. */
-	for (i = 0; i < chip->numchips; i++) {
+	for (i = 0; i < nanddev_ntargets(&chip->base); i++) {
 		ret = nand_setup_data_interface(chip, i);
 		if (ret)
-			goto err_nand_manuf_cleanup;
+			goto err_nanddev_cleanup;
 	}
 
 	/* Check, if we should skip the bad block table scan */
@@ -5749,11 +5826,14 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Build bad block table */
 	ret = nand_create_bbt(chip);
 	if (ret)
-		goto err_nand_manuf_cleanup;
+		goto err_nanddev_cleanup;
 
 	return 0;
 
 
+err_nanddev_cleanup:
+	nanddev_cleanup(&chip->base);
+
 err_nand_manuf_cleanup:
 	nand_manufacturer_cleanup(chip);
 
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 19a2b563acdf..fd3c10216eda 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -264,18 +264,19 @@ static int read_abs_bbt(struct nand_chip *this, uint8_t *buf,
 			struct nand_bbt_descr *td, int chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(this);
+	u64 targetsize = nanddev_target_size(&this->base);
 	int res = 0, i;
 
 	if (td->options & NAND_BBT_PERCHIP) {
 		int offs = 0;
-		for (i = 0; i < this->numchips; i++) {
+		for (i = 0; i < nanddev_ntargets(&this->base); i++) {
 			if (chip == -1 || chip == i)
 				res = read_bbt(this, buf, td->pages[i],
-					this->chipsize >> this->bbt_erase_shift,
+					targetsize >> this->bbt_erase_shift,
 					td, offs);
 			if (res)
 				return res;
-			offs += this->chipsize >> this->bbt_erase_shift;
+			offs += targetsize >> this->bbt_erase_shift;
 		}
 	} else {
 		res = read_bbt(this, buf, td->pages[0],
@@ -415,11 +416,12 @@ static void read_abs_bbts(struct nand_chip *this, uint8_t *buf,
 
 /* Scan a given block partially */
 static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
-			   loff_t offs, uint8_t *buf, int numpages)
+			   loff_t offs, uint8_t *buf)
 {
 	struct mtd_info *mtd = nand_to_mtd(this);
+
 	struct mtd_oob_ops ops;
-	int j, ret;
+	int ret, page_offset;
 
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = buf;
@@ -427,12 +429,15 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
 	ops.datbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 
-	for (j = 0; j < numpages; j++) {
+	page_offset = nand_bbm_get_next_page(this, 0);
+
+	while (page_offset >= 0) {
 		/*
 		 * Read the full oob until read_oob is fixed to handle single
 		 * byte reads for 16 bit buswidth.
 		 */
-		ret = mtd_read_oob(mtd, offs, &ops);
+		ret = mtd_read_oob(mtd, offs + (page_offset * mtd->writesize),
+				   &ops);
 		/* Ignore ECC errors when checking for BBM */
 		if (ret && !mtd_is_bitflip_or_eccerr(ret))
 			return ret;
@@ -440,8 +445,9 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
 		if (check_short_pattern(buf, bd))
 			return 1;
 
-		offs += mtd->writesize;
+		page_offset = nand_bbm_get_next_page(this, page_offset + 1);
 	}
+
 	return 0;
 }
 
@@ -459,43 +465,35 @@ static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
 static int create_bbt(struct nand_chip *this, uint8_t *buf,
 		      struct nand_bbt_descr *bd, int chip)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
-	int i, numblocks, numpages;
-	int startblock;
+	int i, numblocks, startblock;
 	loff_t from;
 
 	pr_info("Scanning device for bad blocks\n");
 
-	if (bd->options & NAND_BBT_SCAN2NDPAGE)
-		numpages = 2;
-	else
-		numpages = 1;
-
 	if (chip == -1) {
 		numblocks = mtd->size >> this->bbt_erase_shift;
 		startblock = 0;
 		from = 0;
 	} else {
-		if (chip >= this->numchips) {
+		if (chip >= nanddev_ntargets(&this->base)) {
 			pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
-			       chip + 1, this->numchips);
+			        chip + 1, nanddev_ntargets(&this->base));
 			return -EINVAL;
 		}
-		numblocks = this->chipsize >> this->bbt_erase_shift;
+		numblocks = targetsize >> this->bbt_erase_shift;
 		startblock = chip * numblocks;
 		numblocks += startblock;
 		from = (loff_t)startblock << this->bbt_erase_shift;
 	}
 
-	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
-		from += mtd->erasesize - (mtd->writesize * numpages);
-
 	for (i = startblock; i < numblocks; i++) {
 		int ret;
 
 		BUG_ON(bd->options & NAND_BBT_NO_OOB);
 
-		ret = scan_block_fast(this, bd, from, buf, numpages);
+		ret = scan_block_fast(this, bd, from, buf);
 		if (ret < 0)
 			return ret;
 
@@ -529,6 +527,7 @@ static int create_bbt(struct nand_chip *this, uint8_t *buf,
 static int search_bbt(struct nand_chip *this, uint8_t *buf,
 		      struct nand_bbt_descr *td)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
 	int i, chips;
 	int startblock, block, dir;
@@ -547,8 +546,8 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
 
 	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
-		chips = this->numchips;
-		bbtblocks = this->chipsize >> this->bbt_erase_shift;
+		chips = nanddev_ntargets(&this->base);
+		bbtblocks = targetsize >> this->bbt_erase_shift;
 		startblock &= bbtblocks - 1;
 	} else {
 		chips = 1;
@@ -576,7 +575,7 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
 				break;
 			}
 		}
-		startblock += this->chipsize >> this->bbt_erase_shift;
+		startblock += targetsize >> this->bbt_erase_shift;
 	}
 	/* Check, if we found a bbt for each requested chip */
 	for (i = 0; i < chips; i++) {
@@ -626,6 +625,7 @@ static void search_read_bbts(struct nand_chip *this, uint8_t *buf,
 static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
 			 struct nand_bbt_descr *md, int chip)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	int startblock, dir, page, numblocks, i;
 
 	/*
@@ -637,9 +637,9 @@ static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
 		return td->pages[chip] >>
 				(this->bbt_erase_shift - this->page_shift);
 
-	numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+	numblocks = (int)(targetsize >> this->bbt_erase_shift);
 	if (!(td->options & NAND_BBT_PERCHIP))
-		numblocks *= this->numchips;
+		numblocks *= nanddev_ntargets(&this->base);
 
 	/*
 	 * Automatic placement of the bad block table. Search direction
@@ -717,6 +717,7 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
 		     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
 		     int chipsel)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
 	struct erase_info einfo;
 	int i, res, chip = 0;
@@ -737,10 +738,10 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
 		rcode = 0xff;
 	/* Write bad block table per chip rather than per device? */
 	if (td->options & NAND_BBT_PERCHIP) {
-		numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+		numblocks = (int)(targetsize >> this->bbt_erase_shift);
 		/* Full device write or specific chip? */
 		if (chipsel == -1) {
-			nrchips = this->numchips;
+			nrchips = nanddev_ntargets(&this->base);
 		} else {
 			nrchips = chipsel + 1;
 			chip = chipsel;
@@ -901,7 +902,9 @@ static int write_bbt(struct nand_chip *this, uint8_t *buf,
 static inline int nand_memory_bbt(struct nand_chip *this,
 				  struct nand_bbt_descr *bd)
 {
-	return create_bbt(this, this->data_buf, bd, -1);
+	u8 *pagebuf = nand_get_data_buf(this);
+
+	return create_bbt(this, pagebuf, bd, -1);
 }
 
 /**
@@ -925,7 +928,7 @@ static int check_create(struct nand_chip *this, uint8_t *buf,
 
 	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP)
-		chips = this->numchips;
+		chips = nanddev_ntargets(&this->base);
 	else
 		chips = 1;
 
@@ -1097,14 +1100,15 @@ static int nand_update_bbt(struct nand_chip *this, loff_t offs)
  */
 static void mark_bbt_region(struct nand_chip *this, struct nand_bbt_descr *td)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
 	int i, j, chips, block, nrblocks, update;
 	uint8_t oldval;
 
 	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
-		chips = this->numchips;
-		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+		chips = nanddev_ntargets(&this->base);
+		nrblocks = (int)(targetsize >> this->bbt_erase_shift);
 	} else {
 		chips = 1;
 		nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
@@ -1157,6 +1161,7 @@ static void mark_bbt_region(struct nand_chip *this, struct nand_bbt_descr *td)
  */
 static void verify_bbt_descr(struct nand_chip *this, struct nand_bbt_descr *bd)
 {
+	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
 	u32 pattern_len;
 	u32 bits;
@@ -1185,7 +1190,7 @@ static void verify_bbt_descr(struct nand_chip *this, struct nand_bbt_descr *bd)
 	}
 
 	if (bd->options & NAND_BBT_PERCHIP)
-		table_size = this->chipsize >> this->bbt_erase_shift;
+		table_size = targetsize >> this->bbt_erase_shift;
 	else
 		table_size = mtd->size >> this->bbt_erase_shift;
 	table_size >>= 3;
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 96f039a83bc8..3338c68aaaf1 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -14,20 +14,20 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
 
 	/* Extract ECC requirements from 5th id byte. */
 	if (chip->id.len >= 5 && nand_is_slc(chip)) {
-		chip->ecc_step_ds = 512;
+		chip->base.eccreq.step_size = 512;
 		switch (chip->id.data[4] & 0x3) {
 		case 0x0:
-			chip->ecc_strength_ds = 4;
+			chip->base.eccreq.strength = 4;
 			break;
 		case 0x1:
-			chip->ecc_strength_ds = 2;
+			chip->base.eccreq.strength = 2;
 			break;
 		case 0x2:
-			chip->ecc_strength_ds = 1;
+			chip->base.eccreq.strength = 1;
 			break;
 		default:
 			WARN(1, "Could not get ECC info");
-			chip->ecc_step_ds = 0;
+			chip->base.eccreq.step_size = 0;
 			break;
 		}
 	}
@@ -36,7 +36,14 @@ static void esmt_nand_decode_id(struct nand_chip *chip)
 static int esmt_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		/*
+		 * It is known that some ESMT SLC NANDs have been shipped
+		 * with the factory bad block markers in the first or last page
+		 * of the block, instead of the first or second page. To be on
+		 * the safe side, let's check all three locations.
+		 */
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE |
+				 NAND_BBM_LASTPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 343f477362d1..7c600c4d5ec8 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -418,24 +418,27 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
 				       bool valid_jedecid)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	u8 oobsize;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	oobsize = ((chip->id.data[3] >> 2) & 0x3) |
 		  ((chip->id.data[3] >> 4) & 0x4);
 
 	if (valid_jedecid) {
 		switch (oobsize) {
 		case 0:
-			mtd->oobsize = 2048;
+			memorg->oobsize = 2048;
 			break;
 		case 1:
-			mtd->oobsize = 1664;
+			memorg->oobsize = 1664;
 			break;
 		case 2:
-			mtd->oobsize = 1024;
+			memorg->oobsize = 1024;
 			break;
 		case 3:
-			mtd->oobsize = 640;
+			memorg->oobsize = 640;
 			break;
 		default:
 			/*
@@ -450,25 +453,25 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
 	} else {
 		switch (oobsize) {
 		case 0:
-			mtd->oobsize = 128;
+			memorg->oobsize = 128;
 			break;
 		case 1:
-			mtd->oobsize = 224;
+			memorg->oobsize = 224;
 			break;
 		case 2:
-			mtd->oobsize = 448;
+			memorg->oobsize = 448;
 			break;
 		case 3:
-			mtd->oobsize = 64;
+			memorg->oobsize = 64;
 			break;
 		case 4:
-			mtd->oobsize = 32;
+			memorg->oobsize = 32;
 			break;
 		case 5:
-			mtd->oobsize = 16;
+			memorg->oobsize = 16;
 			break;
 		case 6:
-			mtd->oobsize = 640;
+			memorg->oobsize = 640;
 			break;
 		default:
 			/*
@@ -492,8 +495,10 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
 		 * the actual OOB size for this chip is: 640 * 16k / 8k).
 		 */
 		if (chip->id.data[1] == 0xde)
-			mtd->oobsize *= mtd->writesize / SZ_8K;
+			memorg->oobsize *= memorg->pagesize / SZ_8K;
 	}
+
+	mtd->oobsize = memorg->oobsize;
 }
 
 static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
@@ -503,30 +508,30 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 
 	if (valid_jedecid) {
 		/* Reference: H27UCG8T2E datasheet */
-		chip->ecc_step_ds = 1024;
+		chip->base.eccreq.step_size = 1024;
 
 		switch (ecc_level) {
 		case 0:
-			chip->ecc_step_ds = 0;
-			chip->ecc_strength_ds = 0;
+			chip->base.eccreq.step_size = 0;
+			chip->base.eccreq.strength = 0;
 			break;
 		case 1:
-			chip->ecc_strength_ds = 4;
+			chip->base.eccreq.strength = 4;
 			break;
 		case 2:
-			chip->ecc_strength_ds = 24;
+			chip->base.eccreq.strength = 24;
 			break;
 		case 3:
-			chip->ecc_strength_ds = 32;
+			chip->base.eccreq.strength = 32;
 			break;
 		case 4:
-			chip->ecc_strength_ds = 40;
+			chip->base.eccreq.strength = 40;
 			break;
 		case 5:
-			chip->ecc_strength_ds = 50;
+			chip->base.eccreq.strength = 50;
 			break;
 		case 6:
-			chip->ecc_strength_ds = 60;
+			chip->base.eccreq.strength = 60;
 			break;
 		default:
 			/*
@@ -547,14 +552,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 		if (nand_tech < 3) {
 			/* > 26nm, reference: H27UBG8T2A datasheet */
 			if (ecc_level < 5) {
-				chip->ecc_step_ds = 512;
-				chip->ecc_strength_ds = 1 << ecc_level;
+				chip->base.eccreq.step_size = 512;
+				chip->base.eccreq.strength = 1 << ecc_level;
 			} else if (ecc_level < 7) {
 				if (ecc_level == 5)
-					chip->ecc_step_ds = 2048;
+					chip->base.eccreq.step_size = 2048;
 				else
-					chip->ecc_step_ds = 1024;
-				chip->ecc_strength_ds = 24;
+					chip->base.eccreq.step_size = 1024;
+				chip->base.eccreq.strength = 24;
 			} else {
 				/*
 				 * We should never reach this case, but if that
@@ -567,14 +572,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 		} else {
 			/* <= 26nm, reference: H27UBG8T2B datasheet */
 			if (!ecc_level) {
-				chip->ecc_step_ds = 0;
-				chip->ecc_strength_ds = 0;
+				chip->base.eccreq.step_size = 0;
+				chip->base.eccreq.strength = 0;
 			} else if (ecc_level < 5) {
-				chip->ecc_step_ds = 512;
-				chip->ecc_strength_ds = 1 << (ecc_level - 1);
+				chip->base.eccreq.step_size = 512;
+				chip->base.eccreq.strength = 1 << (ecc_level - 1);
 			} else {
-				chip->ecc_step_ds = 1024;
-				chip->ecc_strength_ds = 24 +
+				chip->base.eccreq.step_size = 1024;
+				chip->base.eccreq.strength = 24 +
 							(8 * (ecc_level - 5));
 			}
 		}
@@ -587,7 +592,7 @@ static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
 	u8 nand_tech;
 
 	/* We need scrambling on all TLC NANDs*/
-	if (chip->bits_per_cell > 2)
+	if (nanddev_bits_per_cell(&chip->base) > 2)
 		chip->options |= NAND_NEED_SCRAMBLING;
 
 	/* And on MLC NANDs with sub-3xnm process */
@@ -609,9 +614,12 @@ static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
 static void hynix_nand_decode_id(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	bool valid_jedecid;
 	u8 tmp;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/*
 	 * Exclude all SLC NANDs from this advanced detection scheme.
 	 * According to the ranges defined in several datasheets, it might
@@ -625,7 +633,8 @@ static void hynix_nand_decode_id(struct nand_chip *chip)
 	}
 
 	/* Extract pagesize */
-	mtd->writesize = 2048 << (chip->id.data[3] & 0x03);
+	memorg->pagesize = 2048 << (chip->id.data[3] & 0x03);
+	mtd->writesize = memorg->pagesize;
 
 	tmp = (chip->id.data[3] >> 4) & 0x3;
 	/*
@@ -635,12 +644,19 @@ static void hynix_nand_decode_id(struct nand_chip *chip)
 	 * The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in
 	 * this case the erasesize is set to 768KiB.
 	 */
-	if (chip->id.data[3] & 0x80)
+	if (chip->id.data[3] & 0x80) {
+		memorg->pages_per_eraseblock = (SZ_1M << tmp) /
+					       memorg->pagesize;
 		mtd->erasesize = SZ_1M << tmp;
-	else if (tmp == 3)
+	} else if (tmp == 3) {
+		memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) /
+					       memorg->pagesize;
 		mtd->erasesize = SZ_512K + SZ_256K;
-	else
+	} else {
+		memorg->pages_per_eraseblock = (SZ_128K << tmp) /
+					       memorg->pagesize;
 		mtd->erasesize = SZ_128K << tmp;
+	}
 
 	/*
 	 * Modern Toggle DDR NANDs have a valid JEDECID even though they are
@@ -672,9 +688,9 @@ static int hynix_nand_init(struct nand_chip *chip)
 	int ret;
 
 	if (!nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+		chip->options |= NAND_BBM_LASTPAGE;
 	else
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
 	if (!hynix)
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index 38b5dc22cb30..9b540e76f84f 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -22,12 +22,15 @@
 int nand_jedec_detect(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	struct nand_jedec_params *p;
 	struct jedec_ecc_info *ecc;
 	int jedec_version = 0;
 	char id[5];
 	int i, val, ret;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/* Try JEDEC for unknown chip or LP */
 	ret = nand_readid_op(chip, 0x40, id, sizeof(id));
 	if (ret || strncmp(id, "JEDEC", sizeof(id)))
@@ -81,18 +84,24 @@ int nand_jedec_detect(struct nand_chip *chip)
 		goto free_jedec_param_page;
 	}
 
-	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	memorg->pagesize = le32_to_cpu(p->byte_per_page);
+	mtd->writesize = memorg->pagesize;
 
 	/* Please reference to the comment for nand_flash_detect_onfi. */
-	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
-	mtd->erasesize *= mtd->writesize;
+	memorg->pages_per_eraseblock =
+			1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize = memorg->pages_per_eraseblock * memorg->pagesize;
+
+	memorg->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	mtd->oobsize = memorg->oobsize;
 
-	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	memorg->luns_per_target = p->lun_count;
+	memorg->planes_per_lun = 1 << p->multi_plane_addr;
 
 	/* Please reference to the comment for nand_flash_detect_onfi. */
-	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
-	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
-	chip->bits_per_cell = p->bits_per_cell;
+	memorg->eraseblocks_per_lun =
+		1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	memorg->bits_per_cell = p->bits_per_cell;
 
 	if (le16_to_cpu(p->features) & JEDEC_FEATURE_16_BIT_BUS)
 		chip->options |= NAND_BUSWIDTH_16;
@@ -101,8 +110,8 @@ int nand_jedec_detect(struct nand_chip *chip)
 	ecc = &p->ecc_info[0];
 
 	if (ecc->codeword_size >= 9) {
-		chip->ecc_strength_ds = ecc->ecc_bits;
-		chip->ecc_step_ds = 1 << ecc->codeword_size;
+		chip->base.eccreq.strength = ecc->ecc_bits;
+		chip->base.eccreq.step_size = 1 << ecc->codeword_size;
 	} else {
 		pr_warn("Invalid codeword size\n");
 	}
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 47d8cda547cf..e287e71347c5 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -62,7 +62,7 @@ static void macronix_nand_fix_broken_get_timings(struct nand_chip *chip)
 static int macronix_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	macronix_nand_fix_broken_get_timings(chip);
 
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index b85e1c13b79e..cbd4f09ac178 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -385,13 +385,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
 	if (!chip->parameters.onfi)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
-	if (chip->bits_per_cell != 1)
+	if (nanddev_bits_per_cell(&chip->base) != 1)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
 	/*
 	 * We only support on-die ECC of 4/512 or 8/512
 	 */
-	if  (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+	if  (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
 	/* 0x2 means on-die ECC is available. */
@@ -424,7 +424,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
 	/*
 	 * We only support on-die ECC of 4/512 or 8/512
 	 */
-	if  (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
+	if  (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
 	return MICRON_ON_DIE_SUPPORTED;
@@ -448,7 +448,7 @@ static int micron_nand_init(struct nand_chip *chip)
 		goto err_free_manuf_data;
 
 	if (mtd->writesize == 2048)
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	ondie = micron_supports_on_die_ecc(chip);
 
@@ -479,7 +479,7 @@ static int micron_nand_init(struct nand_chip *chip)
 		 * That's not needed for 8-bit ECC, because the status expose
 		 * a better approximation of the number of bitflips in a page.
 		 */
-		if (chip->ecc_strength_ds == 4) {
+		if (chip->base.eccreq.strength == 4) {
 			micron->ecc.rawbuf = kmalloc(mtd->writesize +
 						     mtd->oobsize,
 						     GFP_KERNEL);
@@ -489,16 +489,16 @@ static int micron_nand_init(struct nand_chip *chip)
 			}
 		}
 
-		if (chip->ecc_strength_ds == 4)
+		if (chip->base.eccreq.strength == 4)
 			mtd_set_ooblayout(mtd,
 					  &micron_nand_on_die_4_ooblayout_ops);
 		else
 			mtd_set_ooblayout(mtd,
 					  &micron_nand_on_die_8_ooblayout_ops);
 
-		chip->ecc.bytes = chip->ecc_strength_ds * 2;
+		chip->ecc.bytes = chip->base.eccreq.strength * 2;
 		chip->ecc.size = 512;
-		chip->ecc.strength = chip->ecc_strength_ds;
+		chip->ecc.strength = chip->base.eccreq.strength;
 		chip->ecc.algo = NAND_ECC_BCH;
 		chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
 		chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index d8184cf591ad..0b879bd0a68c 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -94,8 +94,8 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
 		goto ext_out;
 	}
 
-	chip->ecc_strength_ds = ecc->ecc_bits;
-	chip->ecc_step_ds = 1 << ecc->codeword_size;
+	chip->base.eccreq.strength = ecc->ecc_bits;
+	chip->base.eccreq.step_size = 1 << ecc->codeword_size;
 	ret = 0;
 
 ext_out:
@@ -140,12 +140,15 @@ static void nand_bit_wise_majority(const void **srcbufs,
 int nand_onfi_detect(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
 	struct nand_onfi_params *p;
 	struct onfi_params *onfi;
 	int onfi_version = 0;
 	char id[4];
 	int i, ret, val;
 
+	memorg = nanddev_get_memorg(&chip->base);
+
 	/* Try ONFI for unknown chip or LP */
 	ret = nand_readid_op(chip, 0x20, id, sizeof(id));
 	if (ret || strncmp(id, "ONFI", 4))
@@ -221,32 +224,36 @@ int nand_onfi_detect(struct nand_chip *chip)
 		goto free_onfi_param_page;
 	}
 
-	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	memorg->pagesize = le32_to_cpu(p->byte_per_page);
+	mtd->writesize = memorg->pagesize;
 
 	/*
 	 * pages_per_block and blocks_per_lun may not be a power-of-2 size
 	 * (don't ask me who thought of this...). MTD assumes that these
 	 * dimensions will be power-of-2, so just truncate the remaining area.
 	 */
-	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
-	mtd->erasesize *= mtd->writesize;
+	memorg->pages_per_eraseblock =
+			1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize = memorg->pages_per_eraseblock * memorg->pagesize;
 
-	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	memorg->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	mtd->oobsize = memorg->oobsize;
 
-	/* See erasesize comment */
-	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
-	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
-	chip->bits_per_cell = p->bits_per_cell;
+	memorg->luns_per_target = p->lun_count;
+	memorg->planes_per_lun = 1 << p->interleaved_bits;
 
-	chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
-	chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+	/* See erasesize comment */
+	memorg->eraseblocks_per_lun =
+		1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+	memorg->max_bad_eraseblocks_per_lun = le32_to_cpu(p->blocks_per_lun);
+	memorg->bits_per_cell = p->bits_per_cell;
 
 	if (le16_to_cpu(p->features) & ONFI_FEATURE_16_BIT_BUS)
 		chip->options |= NAND_BUSWIDTH_16;
 
 	if (p->ecc_bits != 0xff) {
-		chip->ecc_strength_ds = p->ecc_bits;
-		chip->ecc_step_ds = 512;
+		chip->base.eccreq.strength = p->ecc_bits;
+		chip->base.eccreq.step_size = 512;
 	} else if (onfi_version >= 21 &&
 		(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
 
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index e46d4c492ad8..5552ce20ede0 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -20,6 +20,9 @@
 static void samsung_nand_decode_id(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+
+	memorg = nanddev_get_memorg(&chip->base);
 
 	/* New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) */
 	if (chip->id.len == 6 && !nand_is_slc(chip) &&
@@ -27,29 +30,30 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 		u8 extid = chip->id.data[3];
 
 		/* Get pagesize */
-		mtd->writesize = 2048 << (extid & 0x03);
+		memorg->pagesize = 2048 << (extid & 0x03);
+		mtd->writesize = memorg->pagesize;
 
 		extid >>= 2;
 
 		/* Get oobsize */
 		switch (((extid >> 2) & 0x4) | (extid & 0x3)) {
 		case 1:
-			mtd->oobsize = 128;
+			memorg->oobsize = 128;
 			break;
 		case 2:
-			mtd->oobsize = 218;
+			memorg->oobsize = 218;
 			break;
 		case 3:
-			mtd->oobsize = 400;
+			memorg->oobsize = 400;
 			break;
 		case 4:
-			mtd->oobsize = 436;
+			memorg->oobsize = 436;
 			break;
 		case 5:
-			mtd->oobsize = 512;
+			memorg->oobsize = 512;
 			break;
 		case 6:
-			mtd->oobsize = 640;
+			memorg->oobsize = 640;
 			break;
 		default:
 			/*
@@ -62,31 +66,37 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 			break;
 		}
 
+		mtd->oobsize = memorg->oobsize;
+
 		/* Get blocksize */
 		extid >>= 2;
+		memorg->pages_per_eraseblock = (128 * 1024) <<
+					       (((extid >> 1) & 0x04) |
+						(extid & 0x03)) /
+					       memorg->pagesize;
 		mtd->erasesize = (128 * 1024) <<
 				 (((extid >> 1) & 0x04) | (extid & 0x03));
 
 		/* Extract ECC requirements from 5th id byte*/
 		extid = (chip->id.data[4] >> 4) & 0x07;
 		if (extid < 5) {
-			chip->ecc_step_ds = 512;
-			chip->ecc_strength_ds = 1 << extid;
+			chip->base.eccreq.step_size = 512;
+			chip->base.eccreq.strength = 1 << extid;
 		} else {
-			chip->ecc_step_ds = 1024;
+			chip->base.eccreq.step_size = 1024;
 			switch (extid) {
 			case 5:
-				chip->ecc_strength_ds = 24;
+				chip->base.eccreq.strength = 24;
 				break;
 			case 6:
-				chip->ecc_strength_ds = 40;
+				chip->base.eccreq.strength = 40;
 				break;
 			case 7:
-				chip->ecc_strength_ds = 60;
+				chip->base.eccreq.strength = 60;
 				break;
 			default:
 				WARN(1, "Could not decode ECC info");
-				chip->ecc_step_ds = 0;
+				chip->base.eccreq.step_size = 0;
 			}
 		}
 	} else {
@@ -96,8 +106,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 			switch (chip->id.data[1]) {
 			/* K9F4G08U0D-S[I|C]B0(T00) */
 			case 0xDC:
-				chip->ecc_step_ds = 512;
-				chip->ecc_strength_ds = 1;
+				chip->base.eccreq.step_size = 512;
+				chip->base.eccreq.strength = 1;
 				break;
 
 			/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -121,9 +131,9 @@ static int samsung_nand_init(struct nand_chip *chip)
 		chip->options |= NAND_SAMSUNG_LP_OPTIONS;
 
 	if (!nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+		chip->options |= NAND_BBM_LASTPAGE;
 	else
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index d068163b64b3..74ffcae48726 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -101,6 +101,9 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
 static void toshiba_nand_decode_id(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_memory_organization *memorg;
+
+	memorg = nanddev_get_memorg(&chip->base);
 
 	nand_decode_ext_id(chip);
 
@@ -114,8 +117,10 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	 */
 	if (chip->id.len >= 6 && nand_is_slc(chip) &&
 	    (chip->id.data[5] & 0x7) == 0x6 /* 24nm */ &&
-	    !(chip->id.data[4] & 0x80) /* !BENAND */)
-		mtd->oobsize = 32 * mtd->writesize >> 9;
+	    !(chip->id.data[4] & 0x80) /* !BENAND */) {
+		memorg->oobsize = 32 * memorg->pagesize >> 9;
+		mtd->oobsize = memorg->oobsize;
+	}
 
 	/*
 	 * Extract ECC requirements from 6th id byte.
@@ -125,20 +130,20 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	 *  - 24nm: 8 bit ECC for each 512Byte is required.
 	 */
 	if (chip->id.len >= 6 && nand_is_slc(chip)) {
-		chip->ecc_step_ds = 512;
+		chip->base.eccreq.step_size = 512;
 		switch (chip->id.data[5] & 0x7) {
 		case 0x4:
-			chip->ecc_strength_ds = 1;
+			chip->base.eccreq.strength = 1;
 			break;
 		case 0x5:
-			chip->ecc_strength_ds = 4;
+			chip->base.eccreq.strength = 4;
 			break;
 		case 0x6:
-			chip->ecc_strength_ds = 8;
+			chip->base.eccreq.strength = 8;
 			break;
 		default:
 			WARN(1, "Could not get ECC info");
-			chip->ecc_step_ds = 0;
+			chip->base.eccreq.step_size = 0;
 			break;
 		}
 	}
@@ -147,7 +152,7 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 static int toshiba_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
-		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	/* Check that chip is BENAND and ECC mode is on-die */
 	if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 933d1a629c51..df63fa564082 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -298,6 +298,8 @@ union ns_mem {
  * The structure which describes all the internal simulator data.
  */
 struct nandsim {
+	struct nand_chip chip;
+	struct nand_controller base;
 	struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
 	unsigned int nbparts;
 
@@ -644,9 +646,6 @@ static int __init init_nandsim(struct mtd_info *mtd)
 		return -EIO;
 	}
 
-	/* Force mtd to not do delays */
-	chip->legacy.chip_delay = 0;
-
 	/* Initialize the NAND flash parameters */
 	ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
 	ns->geom.totsz    = mtd->size;
@@ -2076,24 +2075,6 @@ static void ns_nand_write_byte(struct nand_chip *chip, u_char byte)
 	return;
 }
 
-static void ns_hwcontrol(struct nand_chip *chip, int cmd, unsigned int bitmask)
-{
-	struct nandsim *ns = nand_get_controller_data(chip);
-
-	ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
-	ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
-	ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
-
-	if (cmd != NAND_CMD_NONE)
-		ns_nand_write_byte(chip, cmd);
-}
-
-static int ns_device_ready(struct nand_chip *chip)
-{
-	NS_DBG("device_ready\n");
-	return 1;
-}
-
 static void ns_nand_write_buf(struct nand_chip *chip, const u_char *buf,
 			      int len)
 {
@@ -2145,7 +2126,7 @@ static void ns_nand_read_buf(struct nand_chip *chip, u_char *buf, int len)
 		int i;
 
 		for (i = 0; i < len; i++)
-			buf[i] = chip->legacy.read_byte(chip);
+			buf[i] = ns_nand_read_byte(chip);
 
 		return;
 	}
@@ -2168,6 +2149,46 @@ static void ns_nand_read_buf(struct nand_chip *chip, u_char *buf, int len)
 	return;
 }
 
+static int ns_exec_op(struct nand_chip *chip, const struct nand_operation *op,
+		      bool check_only)
+{
+	int i;
+	unsigned int op_id;
+	const struct nand_op_instr *instr = NULL;
+	struct nandsim *ns = nand_get_controller_data(chip);
+
+	ns->lines.ce = 1;
+
+	for (op_id = 0; op_id < op->ninstrs; op_id++) {
+		instr = &op->instrs[op_id];
+		ns->lines.cle = 0;
+		ns->lines.ale = 0;
+
+		switch (instr->type) {
+		case NAND_OP_CMD_INSTR:
+			ns->lines.cle = 1;
+			ns_nand_write_byte(chip, instr->ctx.cmd.opcode);
+			break;
+		case NAND_OP_ADDR_INSTR:
+			ns->lines.ale = 1;
+			for (i = 0; i < instr->ctx.addr.naddrs; i++)
+				ns_nand_write_byte(chip, instr->ctx.addr.addrs[i]);
+			break;
+		case NAND_OP_DATA_IN_INSTR:
+			ns_nand_read_buf(chip, instr->ctx.data.buf.in, instr->ctx.data.len);
+			break;
+		case NAND_OP_DATA_OUT_INSTR:
+			ns_nand_write_buf(chip, instr->ctx.data.buf.out, instr->ctx.data.len);
+			break;
+		case NAND_OP_WAITRDY_INSTR:
+			/* we are always ready */
+			break;
+		}
+	}
+
+	return 0;
+}
+
 static int ns_attach_chip(struct nand_chip *chip)
 {
 	unsigned int eccsteps, eccbytes;
@@ -2208,6 +2229,7 @@ static int ns_attach_chip(struct nand_chip *chip)
 
 static const struct nand_controller_ops ns_controller_ops = {
 	.attach_chip = ns_attach_chip,
+	.exec_op = ns_exec_op,
 };
 
 /*
@@ -2216,7 +2238,7 @@ static const struct nand_controller_ops ns_controller_ops = {
 static int __init ns_init_module(void)
 {
 	struct nand_chip *chip;
-	struct nandsim *nand;
+	struct nandsim *ns;
 	int retval = -ENOMEM, i;
 
 	if (bus_width != 8 && bus_width != 16) {
@@ -2224,25 +2246,15 @@ static int __init ns_init_module(void)
 		return -EINVAL;
 	}
 
-	/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
-	chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim),
-		       GFP_KERNEL);
-	if (!chip) {
+	ns = kzalloc(sizeof(struct nandsim), GFP_KERNEL);
+	if (!ns) {
 		NS_ERR("unable to allocate core structures.\n");
 		return -ENOMEM;
 	}
+	chip	    = &ns->chip;
 	nsmtd       = nand_to_mtd(chip);
-	nand        = (struct nandsim *)(chip + 1);
-	nand_set_controller_data(chip, (void *)nand);
+	nand_set_controller_data(chip, (void *)ns);
 
-	/*
-	 * Register simulator's callbacks.
-	 */
-	chip->legacy.cmd_ctrl	 = ns_hwcontrol;
-	chip->legacy.read_byte  = ns_nand_read_byte;
-	chip->legacy.dev_ready  = ns_device_ready;
-	chip->legacy.write_buf  = ns_nand_write_buf;
-	chip->legacy.read_buf   = ns_nand_read_buf;
 	chip->ecc.mode   = NAND_ECC_SOFT;
 	chip->ecc.algo   = NAND_ECC_HAMMING;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
@@ -2251,9 +2263,11 @@ static int __init ns_init_module(void)
 
 	switch (bbt) {
 	case 2:
-		 chip->bbt_options |= NAND_BBT_NO_OOB;
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+		/* fall through */
 	case 1:
-		 chip->bbt_options |= NAND_BBT_USE_FLASH;
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+		/* fall through */
 	case 0:
 		break;
 	default:
@@ -2266,19 +2280,19 @@ static int __init ns_init_module(void)
 	 * the initial ID read command correctly
 	 */
 	if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF)
-		nand->geom.idbytes = 8;
+		ns->geom.idbytes = 8;
 	else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF)
-		nand->geom.idbytes = 6;
+		ns->geom.idbytes = 6;
 	else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF)
-		nand->geom.idbytes = 4;
+		ns->geom.idbytes = 4;
 	else
-		nand->geom.idbytes = 2;
-	nand->regs.status = NS_STATUS_OK(nand);
-	nand->nxstate = STATE_UNKNOWN;
-	nand->options |= OPT_PAGE512; /* temporary value */
-	memcpy(nand->ids, id_bytes, sizeof(nand->ids));
+		ns->geom.idbytes = 2;
+	ns->regs.status = NS_STATUS_OK(ns);
+	ns->nxstate = STATE_UNKNOWN;
+	ns->options |= OPT_PAGE512; /* temporary value */
+	memcpy(ns->ids, id_bytes, sizeof(ns->ids));
 	if (bus_width == 16) {
-		nand->busw = 16;
+		ns->busw = 16;
 		chip->options |= NAND_BUSWIDTH_16;
 	}
 
@@ -2293,7 +2307,10 @@ static int __init ns_init_module(void)
 	if ((retval = parse_gravepages()) != 0)
 		goto error;
 
-	chip->legacy.dummy_controller.ops = &ns_controller_ops;
+	nand_controller_init(&ns->base);
+	ns->base.ops = &ns_controller_ops;
+	chip->controller = &ns->base;
+
 	retval = nand_scan(chip, 1);
 	if (retval) {
 		NS_ERR("Could not scan NAND Simulator device\n");
@@ -2302,16 +2319,23 @@ static int __init ns_init_module(void)
 
 	if (overridesize) {
 		uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
+		struct nand_memory_organization *memorg;
+		u64 targetsize;
+
+		memorg = nanddev_get_memorg(&chip->base);
+
 		if (new_size >> overridesize != nsmtd->erasesize) {
 			NS_ERR("overridesize is too big\n");
 			retval = -EINVAL;
 			goto err_exit;
 		}
+
 		/* N.B. This relies on nand_scan not doing anything with the size before we change it */
 		nsmtd->size = new_size;
-		chip->chipsize = new_size;
+		memorg->eraseblocks_per_lun = 1 << overridesize;
+		targetsize = nanddev_target_size(&chip->base);
 		chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
-		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+		chip->pagemask = (targetsize >> chip->page_shift) - 1;
 	}
 
 	if ((retval = setup_wear_reporting(nsmtd)) != 0)
@@ -2323,27 +2347,27 @@ static int __init ns_init_module(void)
 	if ((retval = nand_create_bbt(chip)) != 0)
 		goto err_exit;
 
-	if ((retval = parse_badblocks(nand, nsmtd)) != 0)
+	if ((retval = parse_badblocks(ns, nsmtd)) != 0)
 		goto err_exit;
 
 	/* Register NAND partitions */
-	retval = mtd_device_register(nsmtd, &nand->partitions[0],
-				     nand->nbparts);
+	retval = mtd_device_register(nsmtd, &ns->partitions[0],
+				     ns->nbparts);
 	if (retval != 0)
 		goto err_exit;
 
-	if ((retval = nandsim_debugfs_create(nand)) != 0)
+	if ((retval = nandsim_debugfs_create(ns)) != 0)
 		goto err_exit;
 
         return 0;
 
 err_exit:
-	free_nandsim(nand);
+	free_nandsim(ns);
 	nand_release(chip);
-	for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
-		kfree(nand->partitions[i].name);
+	for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
+		kfree(ns->partitions[i].name);
 error:
-	kfree(chip);
+	kfree(ns);
 	free_lists();
 
 	return retval;
@@ -2364,7 +2388,7 @@ static void __exit ns_cleanup_module(void)
 	nand_release(chip); /* Unregister driver */
 	for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
 		kfree(ns->partitions[i].name);
-	kfree(mtd_to_nand(nsmtd));        /* Free other structures */
+	kfree(ns);        /* Free other structures */
 	free_lists();
 }
 
diff --git a/drivers/mtd/nand/raw/nuc900_nand.c b/drivers/mtd/nand/raw/nuc900_nand.c
index 38b1994e7ed3..56fa84029482 100644
--- a/drivers/mtd/nand/raw/nuc900_nand.c
+++ b/drivers/mtd/nand/raw/nuc900_nand.c
@@ -192,8 +192,9 @@ static void nuc900_nand_command_lp(struct nand_chip *chip,
 		return;
 
 	case NAND_CMD_READ0:
-
 		write_cmd_reg(nand, NAND_CMD_READSTART);
+		/* fall through */
+
 	default:
 
 		if (!chip->legacy.dev_ready) {
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 8f280a2962c8..a9a275342a41 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -1725,9 +1725,9 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info)
 		break;
 	}
 
-	if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_BCH)) {
+	if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
 		dev_err(&info->pdev->dev,
-			"CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+			"CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
 		return false;
 	}
 	if (ecc_needs_omap_bch && !IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH)) {
diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c
index a3f32f939cc1..94c6401ef32f 100644
--- a/drivers/mtd/nand/raw/omap_elm.c
+++ b/drivers/mtd/nand/raw/omap_elm.c
@@ -465,11 +465,13 @@ static int elm_context_save(struct elm_info *info)
 					ELM_SYNDROME_FRAGMENT_5 + offset);
 			regs->elm_syndrome_fragment_4[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_4 + offset);
+			/* fall through */
 		case BCH8_ECC:
 			regs->elm_syndrome_fragment_3[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_3 + offset);
 			regs->elm_syndrome_fragment_2[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_2 + offset);
+			/* fall through */
 		case BCH4_ECC:
 			regs->elm_syndrome_fragment_1[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_1 + offset);
@@ -511,11 +513,13 @@ static int elm_context_restore(struct elm_info *info)
 					regs->elm_syndrome_fragment_5[i]);
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset,
 					regs->elm_syndrome_fragment_4[i]);
+			/* fall through */
 		case BCH8_ECC:
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset,
 					regs->elm_syndrome_fragment_3[i]);
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_2 + offset,
 					regs->elm_syndrome_fragment_2[i]);
+			/* fall through */
 		case BCH4_ECC:
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_1 + offset,
 					regs->elm_syndrome_fragment_1[i]);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 920e7375084f..6ead55e05b80 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1680,14 +1680,12 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
 	u8 *cw_data_buf, *cw_oob_buf;
 	int cw, data_size, oob_size, ret = 0;
 
-	if (!data_buf) {
-		data_buf = chip->data_buf;
-		chip->pagebuf = -1;
-	}
+	if (!data_buf)
+		data_buf = nand_get_data_buf(chip);
 
 	if (!oob_buf) {
+		nand_get_data_buf(chip);
 		oob_buf = chip->oob_poi;
-		chip->pagebuf = -1;
 	}
 
 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index cf6b1be1cf9c..e509c93737c4 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -101,14 +101,12 @@ static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
 static struct nand_bbt_descr flctl_4secc_smallpage = {
-	.options = NAND_BBT_SCAN2NDPAGE,
 	.offs = 11,
 	.len = 1,
 	.pattern = scan_ff_pattern,
 };
 
 static struct nand_bbt_descr flctl_4secc_largepage = {
-	.options = NAND_BBT_SCAN2NDPAGE,
 	.offs = 0,
 	.len = 2,
 	.pattern = scan_ff_pattern,
@@ -986,6 +984,7 @@ static void flctl_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
 
 static int flctl_chip_attach_chip(struct nand_chip *chip)
 {
+	u64 targetsize = nanddev_target_size(&chip->base);
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 
@@ -998,11 +997,11 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
 
 	if (mtd->writesize == 512) {
 		flctl->page_size = 0;
-		if (chip->chipsize > (32 << 20)) {
+		if (targetsize > (32 << 20)) {
 			/* big than 32MB */
 			flctl->rw_ADRCNT = ADRCNT_4;
 			flctl->erase_ADRCNT = ADRCNT_3;
-		} else if (chip->chipsize > (2 << 16)) {
+		} else if (targetsize > (2 << 16)) {
 			/* big than 128KB */
 			flctl->rw_ADRCNT = ADRCNT_3;
 			flctl->erase_ADRCNT = ADRCNT_2;
@@ -1012,11 +1011,11 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
 		}
 	} else {
 		flctl->page_size = 1;
-		if (chip->chipsize > (128 << 20)) {
+		if (targetsize > (128 << 20)) {
 			/* big than 128MB */
 			flctl->rw_ADRCNT = ADRCNT2_E;
 			flctl->erase_ADRCNT = ADRCNT_3;
-		} else if (chip->chipsize > (8 << 16)) {
+		} else if (targetsize > (8 << 16)) {
 			/* big than 512KB */
 			flctl->rw_ADRCNT = ADRCNT_4;
 			flctl->erase_ADRCNT = ADRCNT_2;
@@ -1178,6 +1177,8 @@ static int flctl_probe(struct platform_device *pdev)
 	if (pdata->flcmncr_val & SEL_16BIT)
 		nand->options |= NAND_BUSWIDTH_16;
 
+	nand->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
 
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 4282bc477761..b021a5720b42 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -42,7 +42,8 @@
 #define NFC_REG_CMD		0x0024
 #define NFC_REG_RCMD_SET	0x0028
 #define NFC_REG_WCMD_SET	0x002C
-#define NFC_REG_IO_DATA		0x0030
+#define NFC_REG_A10_IO_DATA	0x0030
+#define NFC_REG_A23_IO_DATA	0x0300
 #define NFC_REG_ECC_CTL		0x0034
 #define NFC_REG_ECC_ST		0x0038
 #define NFC_REG_DEBUG		0x003C
@@ -200,6 +201,22 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
 	return container_of(nand, struct sunxi_nand_chip, nand);
 }
 
+/*
+ * NAND Controller capabilities structure: stores NAND controller capabilities
+ * for distinction between compatible strings.
+ *
+ * @sram_through_ahb:	On A23, we choose to access the internal RAM through AHB
+ *                      instead of MBUS (less configuration). A10, A10s, A13 and
+ *                      A20 use the MBUS but no extra configuration is needed.
+ * @reg_io_data:	I/O data register
+ * @dma_maxburst:	DMA maxburst
+ */
+struct sunxi_nfc_caps {
+	bool sram_through_ahb;
+	unsigned int reg_io_data;
+	unsigned int dma_maxburst;
+};
+
 /**
  * struct sunxi_nfc - stores sunxi NAND controller information
  *
@@ -228,6 +245,7 @@ struct sunxi_nfc {
 	struct list_head chips;
 	struct completion complete;
 	struct dma_chan *dmac;
+	const struct sunxi_nfc_caps *caps;
 };
 
 static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_controller *ctrl)
@@ -350,10 +368,29 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf,
 		goto err_unmap_buf;
 	}
 
-	writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
-	       nfc->regs + NFC_REG_CTL);
+	/*
+	 * On A23, we suppose the "internal RAM" (p.12 of the NFC user manual)
+	 * refers to the NAND controller's internal SRAM. This memory is mapped
+	 * and so is accessible from the AHB. It seems that it can also be
+	 * accessed by the MBUS. MBUS accesses are mandatory when using the
+	 * internal DMA instead of the external DMA engine.
+	 *
+	 * During DMA I/O operation, either we access this memory from the AHB
+	 * by clearing the NFC_RAM_METHOD bit, or we set the bit and use the
+	 * MBUS. In this case, we should also configure the MBUS DMA length
+	 * NFC_REG_MDMA_CNT(0xC4) to be chunksize * nchunks. NAND I/O over MBUS
+	 * are also limited to 32kiB pages.
+	 */
+	if (nfc->caps->sram_through_ahb)
+		writel(readl(nfc->regs + NFC_REG_CTL) & ~NFC_RAM_METHOD,
+		       nfc->regs + NFC_REG_CTL);
+	else
+		writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
+		       nfc->regs + NFC_REG_CTL);
+
 	writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
 	writel(chunksize, nfc->regs + NFC_REG_CNT);
+
 	dmat = dmaengine_submit(dmad);
 
 	ret = dma_submit_error(dmat);
@@ -1313,20 +1350,19 @@ pio_fallback:
 
 static int sunxi_nfc_hw_ecc_read_oob(struct nand_chip *nand, int page)
 {
-	nand->pagebuf = -1;
+	u8 *buf = nand_get_data_buf(nand);
 
-	return nand->ecc.read_page(nand, nand->data_buf, 1, page);
+	return nand->ecc.read_page(nand, buf, 1, page);
 }
 
 static int sunxi_nfc_hw_ecc_write_oob(struct nand_chip *nand, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(nand);
+	u8 *buf = nand_get_data_buf(nand);
 	int ret;
 
-	nand->pagebuf = -1;
-
-	memset(nand->data_buf, 0xff, mtd->writesize);
-	ret = nand->ecc.write_page(nand, nand->data_buf, 1, page);
+	memset(buf, 0xff, mtd->writesize);
+	ret = nand->ecc.write_page(nand, buf, 1, page);
 	if (ret)
 		return ret;
 
@@ -1724,8 +1760,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
 	nand->options |= NAND_SUBPAGE_READ;
 
 	if (!ecc->size) {
-		ecc->size = nand->ecc_step_ds;
-		ecc->strength = nand->ecc_strength_ds;
+		ecc->size = nand->base.eccreq.step_size;
+		ecc->strength = nand->base.eccreq.strength;
 	}
 
 	if (!ecc->size || !ecc->strength)
@@ -2088,6 +2124,12 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 		goto out_mod_clk_unprepare;
 	}
 
+	nfc->caps = of_device_get_match_data(&pdev->dev);
+	if (!nfc->caps) {
+		ret = -EINVAL;
+		goto out_ahb_reset_reassert;
+	}
+
 	ret = sunxi_nfc_rst(nfc);
 	if (ret)
 		goto out_ahb_reset_reassert;
@@ -2102,12 +2144,12 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 	if (nfc->dmac) {
 		struct dma_slave_config dmac_cfg = { };
 
-		dmac_cfg.src_addr = r->start + NFC_REG_IO_DATA;
+		dmac_cfg.src_addr = r->start + nfc->caps->reg_io_data;
 		dmac_cfg.dst_addr = dmac_cfg.src_addr;
 		dmac_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		dmac_cfg.dst_addr_width = dmac_cfg.src_addr_width;
-		dmac_cfg.src_maxburst = 4;
-		dmac_cfg.dst_maxburst = 4;
+		dmac_cfg.src_maxburst = nfc->caps->dma_maxburst;
+		dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst;
 		dmaengine_slave_config(nfc->dmac, &dmac_cfg);
 	} else {
 		dev_warn(dev, "failed to request rxtx DMA channel\n");
@@ -2152,8 +2194,26 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
+	.reg_io_data = NFC_REG_A10_IO_DATA,
+	.dma_maxburst = 4,
+};
+
+static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
+	.sram_through_ahb = true,
+	.reg_io_data = NFC_REG_A23_IO_DATA,
+	.dma_maxburst = 8,
+};
+
 static const struct of_device_id sunxi_nfc_ids[] = {
-	{ .compatible = "allwinner,sun4i-a10-nand" },
+	{
+		.compatible = "allwinner,sun4i-a10-nand",
+		.data = &sunxi_nfc_a10_caps,
+	},
+	{
+		.compatible = "allwinner,sun8i-a23-nand-controller",
+		.data = &sunxi_nfc_a23_caps,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 13be32c38194..3cc9a4c41443 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -853,7 +853,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
 		} else {
 			strength_sel = strength[i];
 
-			if (strength_sel < chip->ecc_strength_ds)
+			if (strength_sel < chip->base.eccreq.strength)
 				continue;
 		}
 
@@ -917,9 +917,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 	chip->ecc.mode = NAND_ECC_HW;
 	chip->ecc.size = 512;
 	chip->ecc.steps = mtd->writesize / chip->ecc.size;
-	if (chip->ecc_step_ds != 512) {
+	if (chip->base.eccreq.step_size != 512) {
 		dev_err(ctrl->dev, "Unsupported step size %d\n",
-			chip->ecc_step_ds);
+			chip->base.eccreq.step_size);
 		return -EINVAL;
 	}
 
@@ -950,7 +950,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 		if (ret < 0) {
 			dev_err(ctrl->dev,
 				"No valid strength found, minimum %d\n",
-				chip->ecc_strength_ds);
+				chip->base.eccreq.strength);
 			return ret;
 		}
 
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index a662ca1970e5..6d43ddb3332f 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -850,6 +850,9 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 	}
 
 	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
+	if (!of_id)
+		return -ENODEV;
+
 	nfc->variant = (enum vf610_nfc_variant)of_id->data;
 
 	for_each_available_child_of_node(nfc->dev->of_node, child) {
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index fa87ae28cdfe..4c15bb58c623 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -19,21 +19,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 
-static void spinand_cache_op_adjust_colum(struct spinand_device *spinand,
-					  const struct nand_page_io_req *req,
-					  u16 *column)
-{
-	struct nand_device *nand = spinand_to_nand(spinand);
-	unsigned int shift;
-
-	if (nand->memorg.planes_per_lun < 2)
-		return;
-
-	/* The plane number is passed in MSB just above the column address */
-	shift = fls(nand->memorg.pagesize);
-	*column |= req->pos.plane << shift;
-}
-
 static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
 {
 	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(reg,
@@ -227,27 +212,21 @@ static int spinand_load_page_op(struct spinand_device *spinand,
 static int spinand_read_from_cache_op(struct spinand_device *spinand,
 				      const struct nand_page_io_req *req)
 {
-	struct spi_mem_op op = *spinand->op_templates.read_cache;
 	struct nand_device *nand = spinand_to_nand(spinand);
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
-	struct nand_page_io_req adjreq = *req;
+	struct spi_mem_dirmap_desc *rdesc;
 	unsigned int nbytes = 0;
 	void *buf = NULL;
 	u16 column = 0;
-	int ret;
+	ssize_t ret;
 
 	if (req->datalen) {
-		adjreq.datalen = nanddev_page_size(nand);
-		adjreq.dataoffs = 0;
-		adjreq.databuf.in = spinand->databuf;
 		buf = spinand->databuf;
-		nbytes = adjreq.datalen;
+		nbytes = nanddev_page_size(nand);
+		column = 0;
 	}
 
 	if (req->ooblen) {
-		adjreq.ooblen = nanddev_per_page_oobsize(nand);
-		adjreq.ooboffs = 0;
-		adjreq.oobbuf.in = spinand->oobbuf;
 		nbytes += nanddev_per_page_oobsize(nand);
 		if (!buf) {
 			buf = spinand->oobbuf;
@@ -255,28 +234,19 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
 		}
 	}
 
-	spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
-	op.addr.val = column;
+	rdesc = spinand->dirmaps[req->pos.plane].rdesc;
 
-	/*
-	 * Some controllers are limited in term of max RX data size. In this
-	 * case, just repeat the READ_CACHE operation after updating the
-	 * column.
-	 */
 	while (nbytes) {
-		op.data.buf.in = buf;
-		op.data.nbytes = nbytes;
-		ret = spi_mem_adjust_op_size(spinand->spimem, &op);
-		if (ret)
+		ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf);
+		if (ret < 0)
 			return ret;
 
-		ret = spi_mem_exec_op(spinand->spimem, &op);
-		if (ret)
-			return ret;
+		if (!ret || ret > nbytes)
+			return -EIO;
 
-		buf += op.data.nbytes;
-		nbytes -= op.data.nbytes;
-		op.addr.val += op.data.nbytes;
+		nbytes -= ret;
+		column += ret;
+		buf += ret;
 	}
 
 	if (req->datalen)
@@ -300,14 +270,12 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
 static int spinand_write_to_cache_op(struct spinand_device *spinand,
 				     const struct nand_page_io_req *req)
 {
-	struct spi_mem_op op = *spinand->op_templates.write_cache;
 	struct nand_device *nand = spinand_to_nand(spinand);
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
-	struct nand_page_io_req adjreq = *req;
+	struct spi_mem_dirmap_desc *wdesc;
+	unsigned int nbytes, column = 0;
 	void *buf = spinand->databuf;
-	unsigned int nbytes;
-	u16 column = 0;
-	int ret;
+	ssize_t ret;
 
 	/*
 	 * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
@@ -318,12 +286,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 	 */
 	nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
 	memset(spinand->databuf, 0xff, nbytes);
-	adjreq.dataoffs = 0;
-	adjreq.datalen = nanddev_page_size(nand);
-	adjreq.databuf.out = spinand->databuf;
-	adjreq.ooblen = nanddev_per_page_oobsize(nand);
-	adjreq.ooboffs = 0;
-	adjreq.oobbuf.out = spinand->oobbuf;
 
 	if (req->datalen)
 		memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
@@ -340,42 +302,19 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 			       req->ooblen);
 	}
 
-	spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
+	wdesc = spinand->dirmaps[req->pos.plane].wdesc;
 
-	op = *spinand->op_templates.write_cache;
-	op.addr.val = column;
-
-	/*
-	 * Some controllers are limited in term of max TX data size. In this
-	 * case, split the operation into one LOAD CACHE and one or more
-	 * LOAD RANDOM CACHE.
-	 */
 	while (nbytes) {
-		op.data.buf.out = buf;
-		op.data.nbytes = nbytes;
-
-		ret = spi_mem_adjust_op_size(spinand->spimem, &op);
-		if (ret)
-			return ret;
-
-		ret = spi_mem_exec_op(spinand->spimem, &op);
-		if (ret)
+		ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf);
+		if (ret < 0)
 			return ret;
 
-		buf += op.data.nbytes;
-		nbytes -= op.data.nbytes;
-		op.addr.val += op.data.nbytes;
+		if (!ret || ret > nbytes)
+			return -EIO;
 
-		/*
-		 * We need to use the RANDOM LOAD CACHE operation if there's
-		 * more than one iteration, because the LOAD operation might
-		 * reset the cache to 0xff.
-		 */
-		if (nbytes) {
-			column = op.addr.val;
-			op = *spinand->op_templates.update_cache;
-			op.addr.val = column;
-		}
+		nbytes -= ret;
+		column += ret;
+		buf += ret;
 	}
 
 	return 0;
@@ -755,6 +694,59 @@ static int spinand_mtd_block_isreserved(struct mtd_info *mtd, loff_t offs)
 	return ret;
 }
 
+static int spinand_create_dirmap(struct spinand_device *spinand,
+				 unsigned int plane)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+	struct spi_mem_dirmap_info info = {
+		.length = nanddev_page_size(nand) +
+			  nanddev_per_page_oobsize(nand),
+	};
+	struct spi_mem_dirmap_desc *desc;
+
+	/* The plane number is passed in MSB just above the column address */
+	info.offset = plane << fls(nand->memorg.pagesize);
+
+	info.op_tmpl = *spinand->op_templates.update_cache;
+	desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+					  spinand->spimem, &info);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	spinand->dirmaps[plane].wdesc = desc;
+
+	info.op_tmpl = *spinand->op_templates.read_cache;
+	desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+					  spinand->spimem, &info);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	spinand->dirmaps[plane].rdesc = desc;
+
+	return 0;
+}
+
+static int spinand_create_dirmaps(struct spinand_device *spinand)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+	int i, ret;
+
+	spinand->dirmaps = devm_kzalloc(&spinand->spimem->spi->dev,
+					sizeof(*spinand->dirmaps) *
+					nand->memorg.planes_per_lun,
+					GFP_KERNEL);
+	if (!spinand->dirmaps)
+		return -ENOMEM;
+
+	for (i = 0; i < nand->memorg.planes_per_lun; i++) {
+		ret = spinand_create_dirmap(spinand, i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct nand_ops spinand_ops = {
 	.erase = spinand_erase,
 	.markbad = spinand_markbad,
@@ -1012,6 +1004,14 @@ static int spinand_init(struct spinand_device *spinand)
 		goto err_free_bufs;
 	}
 
+	ret = spinand_create_dirmaps(spinand);
+	if (ret) {
+		dev_err(dev,
+			"Failed to create direct mappings for read/write operations (err = %d)\n",
+			ret);
+		goto err_manuf_cleanup;
+	}
+
 	/* After power up, all blocks are locked, so unlock them here. */
 	for (i = 0; i < nand->memorg.ntargets; i++) {
 		ret = spinand_select_target(spinand, i);
@@ -1037,6 +1037,7 @@ static int spinand_init(struct spinand_device *spinand)
 	mtd->_block_markbad = spinand_mtd_block_markbad;
 	mtd->_block_isreserved = spinand_mtd_block_isreserved;
 	mtd->_erase = spinand_mtd_erase;
+	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
 
 	if (spinand->eccinfo.ooblayout)
 		mtd_set_ooblayout(mtd, spinand->eccinfo.ooblayout);
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..e5586390026a 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -162,7 +162,7 @@ static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
 
 static const struct spinand_info gigadevice_spinand_table[] = {
 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
-		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -171,7 +171,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F2GQ4xA", 0xF2,
-		     NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -180,7 +180,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F4GQ4xA", 0xF4,
-		     NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 4096, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -189,7 +189,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
-		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index d16b57081c95..6502727049a8 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -100,7 +100,7 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 
 static const struct spinand_info macronix_spinand_table[] = {
 	SPINAND_INFO("MX35LF1GE4AB", 0x12,
-		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 40, 1, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -109,7 +109,7 @@ static const struct spinand_info macronix_spinand_table[] = {
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
 				     mx35lf1ge4ab_ecc_get_status)),
 	SPINAND_INFO("MX35LF2GE4AB", 0x22,
-		     NAND_MEMORG(1, 2048, 64, 64, 2048, 2, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 20, 2, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 9c4381d6847b..7d7b1f7fcf71 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -92,7 +92,7 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
 
 static const struct spinand_info micron_spinand_table[] = {
 	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
-		     NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index db8021da45b5..1cb3760ff779 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -96,7 +96,7 @@ static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
 static const struct spinand_info toshiba_spinand_table[] = {
 	/* 3.3V 1Gb */
 	SPINAND_INFO("TC58CVG0S3", 0xC2,
-		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -106,7 +106,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
 				     tc58cxgxsx_ecc_get_status)),
 	/* 3.3V 2Gb */
 	SPINAND_INFO("TC58CVG1S3", 0xCB,
-		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -116,7 +116,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
 				     tc58cxgxsx_ecc_get_status)),
 	/* 3.3V 4Gb */
 	SPINAND_INFO("TC58CVG2S0", 0xCD,
-		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -126,7 +126,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
 				     tc58cxgxsx_ecc_get_status)),
 	/* 1.8V 1Gb */
 	SPINAND_INFO("TC58CYG0S3", 0xB2,
-		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -136,7 +136,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
 				     tc58cxgxsx_ecc_get_status)),
 	/* 1.8V 2Gb */
 	SPINAND_INFO("TC58CYG1S3", 0xBB,
-		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -146,7 +146,7 @@ static const struct spinand_info toshiba_spinand_table[] = {
 				     tc58cxgxsx_ecc_get_status)),
 	/* 1.8V 4Gb */
 	SPINAND_INFO("TC58CYG2S0", 0xBD,
-		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 5d944580b898..a6c17e0cace8 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -76,7 +76,7 @@ static int w25m02gv_select_target(struct spinand_device *spinand,
 
 static const struct spinand_info winbond_spinand_table[] = {
 	SPINAND_INFO("W25M02GV", 0xAB,
-		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 2),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -85,7 +85,7 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
 	SPINAND_INFO("W25N01GV", 0xAA,
-		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 89227b1d036a..e0955a98a0f4 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -222,17 +222,17 @@ static int sm_correct_sector(uint8_t *buffer, struct sm_oob *oob)
 	uint8_t ecc[3];
 
 	__nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	if (__nand_correct_data(buffer, ecc, oob->ecc1, SM_SMALL_PAGE,
-				IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC)) < 0)
+				IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
 		return -EIO;
 
 	buffer += SM_SMALL_PAGE;
 
 	__nand_calculate_ecc(buffer, SM_SMALL_PAGE, ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	if (__nand_correct_data(buffer, ecc, oob->ecc2, SM_SMALL_PAGE,
-				IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC)) < 0)
+				IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC)) < 0)
 		return -EIO;
 	return 0;
 }
@@ -399,11 +399,11 @@ restart:
 		if (ftl->smallpagenand) {
 			__nand_calculate_ecc(buf + boffset, SM_SMALL_PAGE,
 					oob.ecc1,
-					IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+					IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 
 			__nand_calculate_ecc(buf + boffset + SM_SMALL_PAGE,
 					SM_SMALL_PAGE, oob.ecc2,
-					IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+					IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 		}
 		if (!sm_write_sector(ftl, zone, block, boffset,
 							buf + boffset, &oob))
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index c71523e94580..73b06304c975 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -21,7 +21,7 @@
  * or detected.
  */
 
-#if IS_ENABLED(CONFIG_MTD_NAND)
+#if IS_ENABLED(CONFIG_MTD_RAW_NAND)
 
 struct nand_ecc_test {
 	const char *name;
@@ -122,9 +122,9 @@ static int no_bit_error_verify(void *error_data, void *error_ecc,
 	int ret;
 
 	__nand_calculate_ecc(error_data, size, calc_ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
-				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	if (ret == 0 && !memcmp(correct_data, error_data, size))
 		return 0;
 
@@ -152,9 +152,9 @@ static int single_bit_error_correct(void *error_data, void *error_ecc,
 	int ret;
 
 	__nand_calculate_ecc(error_data, size, calc_ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
-				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	if (ret == 1 && !memcmp(correct_data, error_data, size))
 		return 0;
 
@@ -189,9 +189,9 @@ static int double_bit_error_detect(void *error_data, void *error_ecc,
 	int ret;
 
 	__nand_calculate_ecc(error_data, size, calc_ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size,
-				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+				  IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 
 	return (ret == -EBADMSG) ? 0 : -EINVAL;
 }
@@ -266,7 +266,7 @@ static int nand_ecc_test_run(const size_t size)
 
 	prandom_bytes(correct_data, size);
 	__nand_calculate_ecc(correct_data, size, correct_ecc,
-			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SMC));
+			     IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC));
 
 	for (i = 0; i < ARRAY_SIZE(nand_ecc_test); i++) {
 		nand_ecc_test[i].prepare(error_data, error_ecc,
author	Richard Weinberger	2019-05-05 11:54:11 +0200
committer	Richard Weinberger	2019-05-05 11:54:11 +0200
commit	1c7cbd634763a0f0727d425c38486f0a3a9339a7 (patch)
tree	6fb09b8fcae59059c36f36437c8fd18cf0db983d /drivers/mtd
parent	37624b58542fb9f2d9a70e6ea006ef8a5f66c30b (diff)
parent	1c14fe2167ef4294b41949bcc372ea39c0510c00 (diff)