Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

3 files changed, 3 insertions, 29 deletions

diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index d9d7efbc77cc..6322d1fb5d62 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -930,7 +930,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 
 	init_completion(&dev->dma_done);
 
-	dev->card_workqueue = create_freezeable_workqueue(DRV_NAME);
+	dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
 
 	if (!dev->card_workqueue)
 		goto error9;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 67822cf6c025..ac0d6a8613b5 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -1258,7 +1258,7 @@ static struct mtd_blktrans_ops sm_ftl_ops = {
 static __init int sm_module_init(void)
 {
 	int error = 0;
-	cache_flush_workqueue = create_freezeable_workqueue("smflush");
+	cache_flush_workqueue = create_freezable_workqueue("smflush");
 
 	if (IS_ERR(cache_flush_workqueue))
 		return PTR_ERR(cache_flush_workqueue);
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index f49e49dc5928..5ebe280225d6 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -672,33 +672,7 @@ static int io_init(struct ubi_device *ubi)
 		ubi->nor_flash = 1;
 	}
 
-	/*
-	 * Set UBI min. I/O size (@ubi->min_io_size). We use @mtd->writebufsize
-	 * for these purposes, not @mtd->writesize. At the moment this does not
-	 * matter for NAND, because currently @mtd->writebufsize is equivalent to
-	 * @mtd->writesize for all NANDs. However, some CFI NOR flashes may
-	 * have @mtd->writebufsize which is multiple of @mtd->writesize.
-	 *
-	 * The reason we use @mtd->writebufsize for @ubi->min_io_size is that
-	 * UBI and UBIFS recovery algorithms rely on the fact that if there was
-	 * an unclean power cut, then we can find offset of the last corrupted
-	 * node, align the offset to @ubi->min_io_size, read the rest of the
-	 * eraseblock starting from this offset, and check whether there are
-	 * only 0xFF bytes. If yes, then we are probably dealing with a
-	 * corruption caused by a power cut, if not, then this is probably some
-	 * severe corruption.
-	 *
-	 * Thus, we have to use the maximum write unit size of the flash, which
-	 * is @mtd->writebufsize, because @mtd->writesize is the minimum write
-	 * size, not the maximum.
-	 */
-	if (ubi->mtd->type == MTD_NANDFLASH)
-		ubi_assert(ubi->mtd->writebufsize == ubi->mtd->writesize);
-	else if (ubi->mtd->type == MTD_NORFLASH)
-		ubi_assert(ubi->mtd->writebufsize % ubi->mtd->writesize == 0);
-
-	ubi->min_io_size = ubi->mtd->writebufsize;
-
+	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
 	/*