Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...

10 files changed, 4 insertions, 1193 deletions

diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index a8b31bddf14b..008df9d8898d 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -209,13 +209,11 @@ static int mchp23k256_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int mchp23k256_remove(struct spi_device *spi)
+static void mchp23k256_remove(struct spi_device *spi)
 {
 	struct mchp23k256_flash *flash = spi_get_drvdata(spi);
 
 	WARN_ON(mtd_device_unregister(&flash->mtd));
-
-	return 0;
 }
 
 static const struct of_device_id mchp23k256_of_table[] = {
diff --git a/drivers/mtd/devices/mchp48l640.c b/drivers/mtd/devices/mchp48l640.c
index 231a10790196..a3fd426df74b 100644
--- a/drivers/mtd/devices/mchp48l640.c
+++ b/drivers/mtd/devices/mchp48l640.c
@@ -341,13 +341,11 @@ static int mchp48l640_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int mchp48l640_remove(struct spi_device *spi)
+static void mchp48l640_remove(struct spi_device *spi)
 {
 	struct mchp48l640_flash *flash = spi_get_drvdata(spi);
 
 	WARN_ON(mtd_device_unregister(&flash->mtd));
-
-	return 0;
 }
 
 static const struct of_device_id mchp48l640_of_table[] = {
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 734878abaa23..134e27328597 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -916,7 +916,7 @@ static int dataflash_probe(struct spi_device *spi)
 	return status;
 }
 
-static int dataflash_remove(struct spi_device *spi)
+static void dataflash_remove(struct spi_device *spi)
 {
 	struct dataflash	*flash = spi_get_drvdata(spi);
 
@@ -925,8 +925,6 @@ static int dataflash_remove(struct spi_device *spi)
 	WARN_ON(mtd_device_unregister(&flash->mtd));
 
 	kfree(flash);
-
-	return 0;
 }
 
 static struct spi_driver dataflash_driver = {
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index 7f124c1bfa40..8813994ce9f4 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -398,13 +398,11 @@ static int sst25l_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int sst25l_remove(struct spi_device *spi)
+static void sst25l_remove(struct spi_device *spi)
 {
 	struct sst25l_flash *flash = spi_get_drvdata(spi);
 
 	WARN_ON(mtd_device_unregister(&flash->mtd));
-
-	return 0;
 }
 
 static struct spi_driver sst25l_driver = {
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
index 5c0e0ec2e6d1..50f4f3484d42 100644
--- a/drivers/mtd/spi-nor/controllers/Kconfig
+++ b/drivers/mtd/spi-nor/controllers/Kconfig
@@ -26,39 +26,3 @@ config SPI_NXP_SPIFI
 	  SPIFI is a specialized controller for connecting serial SPI
 	  Flash. Enable this option if you have a device with a SPIFI
 	  controller and want to access the Flash as a mtd device.
-
-config SPI_INTEL_SPI
-	tristate
-
-config SPI_INTEL_SPI_PCI
-	tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
-	depends on X86 && PCI
-	select SPI_INTEL_SPI
-	help
-	  This enables PCI support for the Intel PCH/PCU SPI controller in
-	  master mode. This controller is present in modern Intel hardware
-	  and is used to hold BIOS and other persistent settings. Using
-	  this driver it is possible to upgrade BIOS directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-pci.
-
-config SPI_INTEL_SPI_PLATFORM
-	tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
-	depends on X86
-	select SPI_INTEL_SPI
-	help
-	  This enables platform support for the Intel PCH/PCU SPI
-	  controller in master mode. This controller is present in modern
-	  Intel hardware and is used to hold BIOS and other persistent
-	  settings. Using this driver it is possible to upgrade BIOS
-	  directly from Linux.
-
-	  Say N here unless you know what you are doing. Overwriting the
-	  SPI flash may render the system unbootable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-spi-platform.
diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile
index e7abba491d98..6e2a1dc68466 100644
--- a/drivers/mtd/spi-nor/controllers/Makefile
+++ b/drivers/mtd/spi-nor/controllers/Makefile
@@ -2,6 +2,3 @@
 obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
 obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
 obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
-obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
-obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
-obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
deleted file mode 100644
index 1bc53b8bb88a..000000000000
--- a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash PCI driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-
-#include "intel-spi.h"
-
-#define BCR		0xdc
-#define BCR_WPD		BIT(0)
-
-static const struct intel_spi_boardinfo bxt_info = {
-	.type = INTEL_SPI_BXT,
-};
-
-static const struct intel_spi_boardinfo cnl_info = {
-	.type = INTEL_SPI_CNL,
-};
-
-static int intel_spi_pci_probe(struct pci_dev *pdev,
-			       const struct pci_device_id *id)
-{
-	struct intel_spi_boardinfo *info;
-	struct intel_spi *ispi;
-	u32 bcr;
-	int ret;
-
-	ret = pcim_enable_device(pdev);
-	if (ret)
-		return ret;
-
-	info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info),
-			    GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	/* Try to make the chip read/write */
-	pci_read_config_dword(pdev, BCR, &bcr);
-	if (!(bcr & BCR_WPD)) {
-		bcr |= BCR_WPD;
-		pci_write_config_dword(pdev, BCR, bcr);
-		pci_read_config_dword(pdev, BCR, &bcr);
-	}
-	info->writeable = !!(bcr & BCR_WPD);
-
-	ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info);
-	if (IS_ERR(ispi))
-		return PTR_ERR(ispi);
-
-	pci_set_drvdata(pdev, ispi);
-	return 0;
-}
-
-static void intel_spi_pci_remove(struct pci_dev *pdev)
-{
-	intel_spi_remove(pci_get_drvdata(pdev));
-}
-
-static const struct pci_device_id intel_spi_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x1bca), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x43a4), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0x51a4), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0x54a4), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
-	{ PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
-	{ PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&bxt_info },
-	{ },
-};
-MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
-
-static struct pci_driver intel_spi_pci_driver = {
-	.name = "intel-spi",
-	.id_table = intel_spi_pci_ids,
-	.probe = intel_spi_pci_probe,
-	.remove = intel_spi_pci_remove,
-};
-
-module_pci_driver(intel_spi_pci_driver);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash PCI driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi-platform.c b/drivers/mtd/spi-nor/controllers/intel-spi-platform.c
deleted file mode 100644
index f80f1086f928..000000000000
--- a/drivers/mtd/spi-nor/controllers/intel-spi-platform.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash platform driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include "intel-spi.h"
-
-static int intel_spi_platform_probe(struct platform_device *pdev)
-{
-	struct intel_spi_boardinfo *info;
-	struct intel_spi *ispi;
-	struct resource *mem;
-
-	info = dev_get_platdata(&pdev->dev);
-	if (!info)
-		return -EINVAL;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ispi = intel_spi_probe(&pdev->dev, mem, info);
-	if (IS_ERR(ispi))
-		return PTR_ERR(ispi);
-
-	platform_set_drvdata(pdev, ispi);
-	return 0;
-}
-
-static int intel_spi_platform_remove(struct platform_device *pdev)
-{
-	struct intel_spi *ispi = platform_get_drvdata(pdev);
-
-	return intel_spi_remove(ispi);
-}
-
-static struct platform_driver intel_spi_platform_driver = {
-	.probe = intel_spi_platform_probe,
-	.remove = intel_spi_platform_remove,
-	.driver = {
-		.name = "intel-spi",
-	},
-};
-
-module_platform_driver(intel_spi_platform_driver);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:intel-spi");
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c
deleted file mode 100644
index a413892ff449..000000000000
--- a/drivers/mtd/spi-nor/controllers/intel-spi.c
+++ /dev/null
@@ -1,968 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sizes.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-
-#include "intel-spi.h"
-
-/* Offsets are from @ispi->base */
-#define BFPREG				0x00
-
-#define HSFSTS_CTL			0x04
-#define HSFSTS_CTL_FSMIE		BIT(31)
-#define HSFSTS_CTL_FDBC_SHIFT		24
-#define HSFSTS_CTL_FDBC_MASK		(0x3f << HSFSTS_CTL_FDBC_SHIFT)
-
-#define HSFSTS_CTL_FCYCLE_SHIFT		17
-#define HSFSTS_CTL_FCYCLE_MASK		(0x0f << HSFSTS_CTL_FCYCLE_SHIFT)
-/* HW sequencer opcodes */
-#define HSFSTS_CTL_FCYCLE_READ		(0x00 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_WRITE		(0x02 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_ERASE		(0x03 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_ERASE_64K	(0x04 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_RDID		(0x06 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_WRSR		(0x07 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_RDSR		(0x08 << HSFSTS_CTL_FCYCLE_SHIFT)
-
-#define HSFSTS_CTL_FGO			BIT(16)
-#define HSFSTS_CTL_FLOCKDN		BIT(15)
-#define HSFSTS_CTL_FDV			BIT(14)
-#define HSFSTS_CTL_SCIP			BIT(5)
-#define HSFSTS_CTL_AEL			BIT(2)
-#define HSFSTS_CTL_FCERR		BIT(1)
-#define HSFSTS_CTL_FDONE		BIT(0)
-
-#define FADDR				0x08
-#define DLOCK				0x0c
-#define FDATA(n)			(0x10 + ((n) * 4))
-
-#define FRACC				0x50
-
-#define FREG(n)				(0x54 + ((n) * 4))
-#define FREG_BASE_MASK			0x3fff
-#define FREG_LIMIT_SHIFT		16
-#define FREG_LIMIT_MASK			(0x03fff << FREG_LIMIT_SHIFT)
-
-/* Offset is from @ispi->pregs */
-#define PR(n)				((n) * 4)
-#define PR_WPE				BIT(31)
-#define PR_LIMIT_SHIFT			16
-#define PR_LIMIT_MASK			(0x3fff << PR_LIMIT_SHIFT)
-#define PR_RPE				BIT(15)
-#define PR_BASE_MASK			0x3fff
-
-/* Offsets are from @ispi->sregs */
-#define SSFSTS_CTL			0x00
-#define SSFSTS_CTL_FSMIE		BIT(23)
-#define SSFSTS_CTL_DS			BIT(22)
-#define SSFSTS_CTL_DBC_SHIFT		16
-#define SSFSTS_CTL_SPOP			BIT(11)
-#define SSFSTS_CTL_ACS			BIT(10)
-#define SSFSTS_CTL_SCGO			BIT(9)
-#define SSFSTS_CTL_COP_SHIFT		12
-#define SSFSTS_CTL_FRS			BIT(7)
-#define SSFSTS_CTL_DOFRS		BIT(6)
-#define SSFSTS_CTL_AEL			BIT(4)
-#define SSFSTS_CTL_FCERR		BIT(3)
-#define SSFSTS_CTL_FDONE		BIT(2)
-#define SSFSTS_CTL_SCIP			BIT(0)
-
-#define PREOP_OPTYPE			0x04
-#define OPMENU0				0x08
-#define OPMENU1				0x0c
-
-#define OPTYPE_READ_NO_ADDR		0
-#define OPTYPE_WRITE_NO_ADDR		1
-#define OPTYPE_READ_WITH_ADDR		2
-#define OPTYPE_WRITE_WITH_ADDR		3
-
-/* CPU specifics */
-#define BYT_PR				0x74
-#define BYT_SSFSTS_CTL			0x90
-#define BYT_BCR				0xfc
-#define BYT_BCR_WPD			BIT(0)
-#define BYT_FREG_NUM			5
-#define BYT_PR_NUM			5
-
-#define LPT_PR				0x74
-#define LPT_SSFSTS_CTL			0x90
-#define LPT_FREG_NUM			5
-#define LPT_PR_NUM			5
-
-#define BXT_PR				0x84
-#define BXT_SSFSTS_CTL			0xa0
-#define BXT_FREG_NUM			12
-#define BXT_PR_NUM			6
-
-#define CNL_PR				0x84
-#define CNL_FREG_NUM			6
-#define CNL_PR_NUM			5
-
-#define LVSCC				0xc4
-#define UVSCC				0xc8
-#define ERASE_OPCODE_SHIFT		8
-#define ERASE_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
-#define ERASE_64K_OPCODE_SHIFT		16
-#define ERASE_64K_OPCODE_MASK		(0xff << ERASE_OPCODE_SHIFT)
-
-#define INTEL_SPI_TIMEOUT		5000 /* ms */
-#define INTEL_SPI_FIFO_SZ		64
-
-/**
- * struct intel_spi - Driver private data
- * @dev: Device pointer
- * @info: Pointer to board specific info
- * @nor: SPI NOR layer structure
- * @base: Beginning of MMIO space
- * @pregs: Start of protection registers
- * @sregs: Start of software sequencer registers
- * @nregions: Maximum number of regions
- * @pr_num: Maximum number of protected range registers
- * @writeable: Is the chip writeable
- * @locked: Is SPI setting locked
- * @swseq_reg: Use SW sequencer in register reads/writes
- * @swseq_erase: Use SW sequencer in erase operation
- * @erase_64k: 64k erase supported
- * @atomic_preopcode: Holds preopcode when atomic sequence is requested
- * @opcodes: Opcodes which are supported. This are programmed by BIOS
- *           before it locks down the controller.
- */
-struct intel_spi {
-	struct device *dev;
-	const struct intel_spi_boardinfo *info;
-	struct spi_nor nor;
-	void __iomem *base;
-	void __iomem *pregs;
-	void __iomem *sregs;
-	size_t nregions;
-	size_t pr_num;
-	bool writeable;
-	bool locked;
-	bool swseq_reg;
-	bool swseq_erase;
-	bool erase_64k;
-	u8 atomic_preopcode;
-	u8 opcodes[8];
-};
-
-static bool writeable;
-module_param(writeable, bool, 0);
-MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)");
-
-static void intel_spi_dump_regs(struct intel_spi *ispi)
-{
-	u32 value;
-	int i;
-
-	dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG));
-
-	value = readl(ispi->base + HSFSTS_CTL);
-	dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value);
-	if (value & HSFSTS_CTL_FLOCKDN)
-		dev_dbg(ispi->dev, "-> Locked\n");
-
-	dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR));
-	dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK));
-
-	for (i = 0; i < 16; i++)
-		dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n",
-			i, readl(ispi->base + FDATA(i)));
-
-	dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC));
-
-	for (i = 0; i < ispi->nregions; i++)
-		dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
-			readl(ispi->base + FREG(i)));
-	for (i = 0; i < ispi->pr_num; i++)
-		dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
-			readl(ispi->pregs + PR(i)));
-
-	if (ispi->sregs) {
-		value = readl(ispi->sregs + SSFSTS_CTL);
-		dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
-		dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
-			readl(ispi->sregs + PREOP_OPTYPE));
-		dev_dbg(ispi->dev, "OPMENU0=0x%08x\n",
-			readl(ispi->sregs + OPMENU0));
-		dev_dbg(ispi->dev, "OPMENU1=0x%08x\n",
-			readl(ispi->sregs + OPMENU1));
-	}
-
-	if (ispi->info->type == INTEL_SPI_BYT)
-		dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
-
-	dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
-	dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
-
-	dev_dbg(ispi->dev, "Protected regions:\n");
-	for (i = 0; i < ispi->pr_num; i++) {
-		u32 base, limit;
-
-		value = readl(ispi->pregs + PR(i));
-		if (!(value & (PR_WPE | PR_RPE)))
-			continue;
-
-		limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
-		base = value & PR_BASE_MASK;
-
-		dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n",
-			 i, base << 12, (limit << 12) | 0xfff,
-			 value & PR_WPE ? 'W' : '.',
-			 value & PR_RPE ? 'R' : '.');
-	}
-
-	dev_dbg(ispi->dev, "Flash regions:\n");
-	for (i = 0; i < ispi->nregions; i++) {
-		u32 region, base, limit;
-
-		region = readl(ispi->base + FREG(i));
-		base = region & FREG_BASE_MASK;
-		limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
-
-		if (base >= limit || (i > 0 && limit == 0))
-			dev_dbg(ispi->dev, " %02d disabled\n", i);
-		else
-			dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n",
-				 i, base << 12, (limit << 12) | 0xfff);
-	}
-
-	dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
-		ispi->swseq_reg ? 'S' : 'H');
-	dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
-		ispi->swseq_erase ? 'S' : 'H');
-}
-
-/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
-static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
-{
-	size_t bytes;
-	int i = 0;
-
-	if (size > INTEL_SPI_FIFO_SZ)
-		return -EINVAL;
-
-	while (size > 0) {
-		bytes = min_t(size_t, size, 4);
-		memcpy_fromio(buf, ispi->base + FDATA(i), bytes);
-		size -= bytes;
-		buf += bytes;
-		i++;
-	}
-
-	return 0;
-}
-
-/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */
-static int intel_spi_write_block(struct intel_spi *ispi, const void *buf,
-				 size_t size)
-{
-	size_t bytes;
-	int i = 0;
-
-	if (size > INTEL_SPI_FIFO_SZ)
-		return -EINVAL;
-
-	while (size > 0) {
-		bytes = min_t(size_t, size, 4);
-		memcpy_toio(ispi->base + FDATA(i), buf, bytes);
-		size -= bytes;
-		buf += bytes;
-		i++;
-	}
-
-	return 0;
-}
-
-static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
-{
-	u32 val;
-
-	return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
-				  !(val & HSFSTS_CTL_SCIP), 0,
-				  INTEL_SPI_TIMEOUT * 1000);
-}
-
-static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
-{
-	u32 val;
-
-	return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
-				  !(val & SSFSTS_CTL_SCIP), 0,
-				  INTEL_SPI_TIMEOUT * 1000);
-}
-
-static int intel_spi_init(struct intel_spi *ispi)
-{
-	u32 opmenu0, opmenu1, lvscc, uvscc, val;
-	int i;
-
-	switch (ispi->info->type) {
-	case INTEL_SPI_BYT:
-		ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
-		ispi->pregs = ispi->base + BYT_PR;
-		ispi->nregions = BYT_FREG_NUM;
-		ispi->pr_num = BYT_PR_NUM;
-		ispi->swseq_reg = true;
-
-		if (writeable) {
-			/* Disable write protection */
-			val = readl(ispi->base + BYT_BCR);
-			if (!(val & BYT_BCR_WPD)) {
-				val |= BYT_BCR_WPD;
-				writel(val, ispi->base + BYT_BCR);
-				val = readl(ispi->base + BYT_BCR);
-			}
-
-			ispi->writeable = !!(val & BYT_BCR_WPD);
-		}
-
-		break;
-
-	case INTEL_SPI_LPT:
-		ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
-		ispi->pregs = ispi->base + LPT_PR;
-		ispi->nregions = LPT_FREG_NUM;
-		ispi->pr_num = LPT_PR_NUM;
-		ispi->swseq_reg = true;
-		break;
-
-	case INTEL_SPI_BXT:
-		ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
-		ispi->pregs = ispi->base + BXT_PR;
-		ispi->nregions = BXT_FREG_NUM;
-		ispi->pr_num = BXT_PR_NUM;
-		ispi->erase_64k = true;
-		break;
-
-	case INTEL_SPI_CNL:
-		ispi->sregs = NULL;
-		ispi->pregs = ispi->base + CNL_PR;
-		ispi->nregions = CNL_FREG_NUM;
-		ispi->pr_num = CNL_PR_NUM;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/* Disable #SMI generation from HW sequencer */
-	val = readl(ispi->base + HSFSTS_CTL);
-	val &= ~HSFSTS_CTL_FSMIE;
-	writel(val, ispi->base + HSFSTS_CTL);
-
-	/*
-	 * Determine whether erase operation should use HW or SW sequencer.
-	 *
-	 * The HW sequencer has a predefined list of opcodes, with only the
-	 * erase opcode being programmable in LVSCC and UVSCC registers.
-	 * If these registers don't contain a valid erase opcode, erase
-	 * cannot be done using HW sequencer.
-	 */
-	lvscc = readl(ispi->base + LVSCC);
-	uvscc = readl(ispi->base + UVSCC);
-	if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
-		ispi->swseq_erase = true;
-	/* SPI controller on Intel BXT supports 64K erase opcode */
-	if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
-		if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
-		    !(uvscc & ERASE_64K_OPCODE_MASK))
-			ispi->erase_64k = false;
-
-	if (ispi->sregs == NULL && (ispi->swseq_reg || ispi->swseq_erase)) {
-		dev_err(ispi->dev, "software sequencer not supported, but required\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Some controllers can only do basic operations using hardware
-	 * sequencer. All other operations are supposed to be carried out
-	 * using software sequencer.
-	 */
-	if (ispi->swseq_reg) {
-		/* Disable #SMI generation from SW sequencer */
-		val = readl(ispi->sregs + SSFSTS_CTL);
-		val &= ~SSFSTS_CTL_FSMIE;
-		writel(val, ispi->sregs + SSFSTS_CTL);
-	}
-
-	/* Check controller's lock status */
-	val = readl(ispi->base + HSFSTS_CTL);
-	ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
-
-	if (ispi->locked && ispi->sregs) {
-		/*
-		 * BIOS programs allowed opcodes and then locks down the
-		 * register. So read back what opcodes it decided to support.
-		 * That's the set we are going to support as well.
-		 */
-		opmenu0 = readl(ispi->sregs + OPMENU0);
-		opmenu1 = readl(ispi->sregs + OPMENU1);
-
-		if (opmenu0 && opmenu1) {
-			for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
-				ispi->opcodes[i] = opmenu0 >> i * 8;
-				ispi->opcodes[i + 4] = opmenu1 >> i * 8;
-			}
-		}
-	}
-
-	intel_spi_dump_regs(ispi);
-
-	return 0;
-}
-
-static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
-{
-	int i;
-	int preop;
-
-	if (ispi->locked) {
-		for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
-			if (ispi->opcodes[i] == opcode)
-				return i;
-
-		return -EINVAL;
-	}
-
-	/* The lock is off, so just use index 0 */
-	writel(opcode, ispi->sregs + OPMENU0);
-	preop = readw(ispi->sregs + PREOP_OPTYPE);
-	writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
-
-	return 0;
-}
-
-static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len)
-{
-	u32 val, status;
-	int ret;
-
-	val = readl(ispi->base + HSFSTS_CTL);
-	val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK);
-
-	switch (opcode) {
-	case SPINOR_OP_RDID:
-		val |= HSFSTS_CTL_FCYCLE_RDID;
-		break;
-	case SPINOR_OP_WRSR:
-		val |= HSFSTS_CTL_FCYCLE_WRSR;
-		break;
-	case SPINOR_OP_RDSR:
-		val |= HSFSTS_CTL_FCYCLE_RDSR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (len > INTEL_SPI_FIFO_SZ)
-		return -EINVAL;
-
-	val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
-	val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
-	val |= HSFSTS_CTL_FGO;
-	writel(val, ispi->base + HSFSTS_CTL);
-
-	ret = intel_spi_wait_hw_busy(ispi);
-	if (ret)
-		return ret;
-
-	status = readl(ispi->base + HSFSTS_CTL);
-	if (status & HSFSTS_CTL_FCERR)
-		return -EIO;
-	else if (status & HSFSTS_CTL_AEL)
-		return -EACCES;
-
-	return 0;
-}
-
-static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len,
-			      int optype)
-{
-	u32 val = 0, status;
-	u8 atomic_preopcode;
-	int ret;
-
-	ret = intel_spi_opcode_index(ispi, opcode, optype);
-	if (ret < 0)
-		return ret;
-
-	if (len > INTEL_SPI_FIFO_SZ)
-		return -EINVAL;
-
-	/*
-	 * Always clear it after each SW sequencer operation regardless
-	 * of whether it is successful or not.
-	 */
-	atomic_preopcode = ispi->atomic_preopcode;
-	ispi->atomic_preopcode = 0;
-
-	/* Only mark 'Data Cycle' bit when there is data to be transferred */
-	if (len > 0)
-		val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
-	val |= ret << SSFSTS_CTL_COP_SHIFT;
-	val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
-	val |= SSFSTS_CTL_SCGO;
-	if (atomic_preopcode) {
-		u16 preop;
-
-		switch (optype) {
-		case OPTYPE_WRITE_NO_ADDR:
-		case OPTYPE_WRITE_WITH_ADDR:
-			/* Pick matching preopcode for the atomic sequence */
-			preop = readw(ispi->sregs + PREOP_OPTYPE);
-			if ((preop & 0xff) == atomic_preopcode)
-				; /* Do nothing */
-			else if ((preop >> 8) == atomic_preopcode)
-				val |= SSFSTS_CTL_SPOP;
-			else
-				return -EINVAL;
-
-			/* Enable atomic sequence */
-			val |= SSFSTS_CTL_ACS;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-	}
-	writel(val, ispi->sregs + SSFSTS_CTL);
-
-	ret = intel_spi_wait_sw_busy(ispi);
-	if (ret)
-		return ret;
-
-	status = readl(ispi->sregs + SSFSTS_CTL);
-	if (status & SSFSTS_CTL_FCERR)
-		return -EIO;
-	else if (status & SSFSTS_CTL_AEL)
-		return -EACCES;
-
-	return 0;
-}
-
-static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
-			      size_t len)
-{
-	struct intel_spi *ispi = nor->priv;
-	int ret;
-
-	/* Address of the first chip */
-	writel(0, ispi->base + FADDR);
-
-	if (ispi->swseq_reg)
-		ret = intel_spi_sw_cycle(ispi, opcode, len,
-					 OPTYPE_READ_NO_ADDR);
-	else
-		ret = intel_spi_hw_cycle(ispi, opcode, len);
-
-	if (ret)
-		return ret;
-
-	return intel_spi_read_block(ispi, buf, len);
-}
-
-static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
-			       size_t len)
-{
-	struct intel_spi *ispi = nor->priv;
-	int ret;
-
-	/*
-	 * This is handled with atomic operation and preop code in Intel
-	 * controller so we only verify that it is available. If the
-	 * controller is not locked, program the opcode to the PREOP
-	 * register for later use.
-	 *
-	 * When hardware sequencer is used there is no need to program
-	 * any opcodes (it handles them automatically as part of a command).
-	 */
-	if (opcode == SPINOR_OP_WREN) {
-		u16 preop;
-
-		if (!ispi->swseq_reg)
-			return 0;
-
-		preop = readw(ispi->sregs + PREOP_OPTYPE);
-		if ((preop & 0xff) != opcode && (preop >> 8) != opcode) {
-			if (ispi->locked)
-				return -EINVAL;
-			writel(opcode, ispi->sregs + PREOP_OPTYPE);
-		}
-
-		/*
-		 * This enables atomic sequence on next SW sycle. Will
-		 * be cleared after next operation.
-		 */
-		ispi->atomic_preopcode = opcode;
-		return 0;
-	}
-
-	/*
-	 * We hope that HW sequencer will do the right thing automatically and
-	 * with the SW sequencer we cannot use preopcode anyway, so just ignore
-	 * the Write Disable operation and pretend it was completed
-	 * successfully.
-	 */
-	if (opcode == SPINOR_OP_WRDI)
-		return 0;
-
-	writel(0, ispi->base + FADDR);
-
-	/* Write the value beforehand */
-	ret = intel_spi_write_block(ispi, buf, len);
-	if (ret)
-		return ret;
-
-	if (ispi->swseq_reg)
-		return intel_spi_sw_cycle(ispi, opcode, len,
-					  OPTYPE_WRITE_NO_ADDR);
-	return intel_spi_hw_cycle(ispi, opcode, len);
-}
-
-static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
-			      u_char *read_buf)
-{
-	struct intel_spi *ispi = nor->priv;
-	size_t block_size, retlen = 0;
-	u32 val, status;
-	ssize_t ret;
-
-	/*
-	 * Atomic sequence is not expected with HW sequencer reads. Make
-	 * sure it is cleared regardless.
-	 */
-	if (WARN_ON_ONCE(ispi->atomic_preopcode))
-		ispi->atomic_preopcode = 0;
-
-	switch (nor->read_opcode) {
-	case SPINOR_OP_READ:
-	case SPINOR_OP_READ_FAST:
-	case SPINOR_OP_READ_4B:
-	case SPINOR_OP_READ_FAST_4B:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	while (len > 0) {
-		block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
-
-		/* Read cannot cross 4K boundary */
-		block_size = min_t(loff_t, from + block_size,
-				   round_up(from + 1, SZ_4K)) - from;
-
-		writel(from, ispi->base + FADDR);
-
-		val = readl(ispi->base + HSFSTS_CTL);
-		val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
-		val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
-		val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
-		val |= HSFSTS_CTL_FCYCLE_READ;
-		val |= HSFSTS_CTL_FGO;
-		writel(val, ispi->base + HSFSTS_CTL);
-
-		ret = intel_spi_wait_hw_busy(ispi);
-		if (ret)
-			return ret;
-
-		status = readl(ispi->base + HSFSTS_CTL);
-		if (status & HSFSTS_CTL_FCERR)
-			ret = -EIO;
-		else if (status & HSFSTS_CTL_AEL)
-			ret = -EACCES;
-
-		if (ret < 0) {
-			dev_err(ispi->dev, "read error: %llx: %#x\n", from,
-				status);
-			return ret;
-		}
-
-		ret = intel_spi_read_block(ispi, read_buf, block_size);
-		if (ret)
-			return ret;
-
-		len -= block_size;
-		from += block_size;
-		retlen += block_size;
-		read_buf += block_size;
-	}
-
-	return retlen;
-}
-
-static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
-			       const u_char *write_buf)
-{
-	struct intel_spi *ispi = nor->priv;
-	size_t block_size, retlen = 0;
-	u32 val, status;
-	ssize_t ret;
-
-	/* Not needed with HW sequencer write, make sure it is cleared */
-	ispi->atomic_preopcode = 0;
-
-	while (len > 0) {
-		block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
-
-		/* Write cannot cross 4K boundary */
-		block_size = min_t(loff_t, to + block_size,
-				   round_up(to + 1, SZ_4K)) - to;
-
-		writel(to, ispi->base + FADDR);
-
-		val = readl(ispi->base + HSFSTS_CTL);
-		val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
-		val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
-		val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
-		val |= HSFSTS_CTL_FCYCLE_WRITE;
-
-		ret = intel_spi_write_block(ispi, write_buf, block_size);
-		if (ret) {
-			dev_err(ispi->dev, "failed to write block\n");
-			return ret;
-		}
-
-		/* Start the write now */
-		val |= HSFSTS_CTL_FGO;
-		writel(val, ispi->base + HSFSTS_CTL);
-
-		ret = intel_spi_wait_hw_busy(ispi);
-		if (ret) {
-			dev_err(ispi->dev, "timeout\n");
-			return ret;
-		}
-
-		status = readl(ispi->base + HSFSTS_CTL);
-		if (status & HSFSTS_CTL_FCERR)
-			ret = -EIO;
-		else if (status & HSFSTS_CTL_AEL)
-			ret = -EACCES;
-
-		if (ret < 0) {
-			dev_err(ispi->dev, "write error: %llx: %#x\n", to,
-				status);
-			return ret;
-		}
-
-		len -= block_size;
-		to += block_size;
-		retlen += block_size;
-		write_buf += block_size;
-	}
-
-	return retlen;
-}
-
-static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
-{
-	size_t erase_size, len = nor->mtd.erasesize;
-	struct intel_spi *ispi = nor->priv;
-	u32 val, status, cmd;
-	int ret;
-
-	/* If the hardware can do 64k erase use that when possible */
-	if (len >= SZ_64K && ispi->erase_64k) {
-		cmd = HSFSTS_CTL_FCYCLE_ERASE_64K;
-		erase_size = SZ_64K;
-	} else {
-		cmd = HSFSTS_CTL_FCYCLE_ERASE;
-		erase_size = SZ_4K;
-	}
-
-	if (ispi->swseq_erase) {
-		while (len > 0) {
-			writel(offs, ispi->base + FADDR);
-
-			ret = intel_spi_sw_cycle(ispi, nor->erase_opcode,
-						 0, OPTYPE_WRITE_WITH_ADDR);
-			if (ret)
-				return ret;
-
-			offs += erase_size;
-			len -= erase_size;
-		}
-
-		return 0;
-	}
-
-	/* Not needed with HW sequencer erase, make sure it is cleared */
-	ispi->atomic_preopcode = 0;
-
-	while (len > 0) {
-		writel(offs, ispi->base + FADDR);
-
-		val = readl(ispi->base + HSFSTS_CTL);
-		val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
-		val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
-		val |= cmd;
-		val |= HSFSTS_CTL_FGO;
-		writel(val, ispi->base + HSFSTS_CTL);
-
-		ret = intel_spi_wait_hw_busy(ispi);
-		if (ret)
-			return ret;
-
-		status = readl(ispi->base + HSFSTS_CTL);
-		if (status & HSFSTS_CTL_FCERR)
-			return -EIO;
-		else if (status & HSFSTS_CTL_AEL)
-			return -EACCES;
-
-		offs += erase_size;
-		len -= erase_size;
-	}
-
-	return 0;
-}
-
-static bool intel_spi_is_protected(const struct intel_spi *ispi,
-				   unsigned int base, unsigned int limit)
-{
-	int i;
-
-	for (i = 0; i < ispi->pr_num; i++) {
-		u32 pr_base, pr_limit, pr_value;
-
-		pr_value = readl(ispi->pregs + PR(i));
-		if (!(pr_value & (PR_WPE | PR_RPE)))
-			continue;
-
-		pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
-		pr_base = pr_value & PR_BASE_MASK;
-
-		if (pr_base >= base && pr_limit <= limit)
-			return true;
-	}
-
-	return false;
-}
-
-/*
- * There will be a single partition holding all enabled flash regions. We
- * call this "BIOS".
- */
-static void intel_spi_fill_partition(struct intel_spi *ispi,
-				     struct mtd_partition *part)
-{
-	u64 end;
-	int i;
-
-	memset(part, 0, sizeof(*part));
-
-	/* Start from the mandatory descriptor region */
-	part->size = 4096;
-	part->name = "BIOS";
-
-	/*
-	 * Now try to find where this partition ends based on the flash
-	 * region registers.
-	 */
-	for (i = 1; i < ispi->nregions; i++) {
-		u32 region, base, limit;
-
-		region = readl(ispi->base + FREG(i));
-		base = region & FREG_BASE_MASK;
-		limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
-
-		if (base >= limit || limit == 0)
-			continue;
-
-		/*
-		 * If any of the regions have protection bits set, make the
-		 * whole partition read-only to be on the safe side.
-		 */
-		if (intel_spi_is_protected(ispi, base, limit))
-			ispi->writeable = false;
-
-		end = (limit << 12) + 4096;
-		if (end > part->size)
-			part->size = end;
-	}
-}
-
-static const struct spi_nor_controller_ops intel_spi_controller_ops = {
-	.read_reg = intel_spi_read_reg,
-	.write_reg = intel_spi_write_reg,
-	.read = intel_spi_read,
-	.write = intel_spi_write,
-	.erase = intel_spi_erase,
-};
-
-struct intel_spi *intel_spi_probe(struct device *dev,
-	struct resource *mem, const struct intel_spi_boardinfo *info)
-{
-	const struct spi_nor_hwcaps hwcaps = {
-		.mask = SNOR_HWCAPS_READ |
-			SNOR_HWCAPS_READ_FAST |
-			SNOR_HWCAPS_PP,
-	};
-	struct mtd_partition part;
-	struct intel_spi *ispi;
-	int ret;
-
-	if (!info || !mem)
-		return ERR_PTR(-EINVAL);
-
-	ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL);
-	if (!ispi)
-		return ERR_PTR(-ENOMEM);
-
-	ispi->base = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(ispi->base))
-		return ERR_CAST(ispi->base);
-
-	ispi->dev = dev;
-	ispi->info = info;
-	ispi->writeable = info->writeable;
-
-	ret = intel_spi_init(ispi);
-	if (ret)
-		return ERR_PTR(ret);
-
-	ispi->nor.dev = ispi->dev;
-	ispi->nor.priv = ispi;
-	ispi->nor.controller_ops = &intel_spi_controller_ops;
-
-	ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
-	if (ret) {
-		dev_info(dev, "failed to locate the chip\n");
-		return ERR_PTR(ret);
-	}
-
-	intel_spi_fill_partition(ispi, &part);
-
-	/* Prevent writes if not explicitly enabled */
-	if (!ispi->writeable || !writeable)
-		ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
-
-	ret = mtd_device_register(&ispi->nor.mtd, &part, 1);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return ispi;
-}
-EXPORT_SYMBOL_GPL(intel_spi_probe);
-
-int intel_spi_remove(struct intel_spi *ispi)
-{
-	return mtd_device_unregister(&ispi->nor.mtd);
-}
-EXPORT_SYMBOL_GPL(intel_spi_remove);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi.h b/drivers/mtd/spi-nor/controllers/intel-spi.h
deleted file mode 100644
index f2871179fd34..000000000000
--- a/drivers/mtd/spi-nor/controllers/intel-spi.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel PCH/PCU SPI flash driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#ifndef INTEL_SPI_H
-#define INTEL_SPI_H
-
-#include <linux/platform_data/x86/intel-spi.h>
-
-struct intel_spi;
-struct resource;
-
-struct intel_spi *intel_spi_probe(struct device *dev,
-	struct resource *mem, const struct intel_spi_boardinfo *info);
-int intel_spi_remove(struct intel_spi *ispi);
-
-#endif /* INTEL_SPI_H */