drivers/net: delete old parallel port de600/de620 drivers

The parallel port is largely replaced by USB, and even in the
day where these drivers were current, the documented speed was
less than 100kB/s.  Let us not pretend that anyone cares about
these drivers anymore, or worse - pretend that anyone is using
them on a modern kernel.

As a side bonus, this is the end of legacy parallel port ethernet,
so we get to drop the whole chunk relating to that in the legacy
Space.c file containing the non-PCI unified probe dispatch.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

6 files changed, 1 insertions, 1834 deletions

diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index b5afe218c31b..ee26ce78e270 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_DLINK
 	bool "D-Link devices"
 	default y
-	depends on PCI || PARPORT
+	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -18,36 +18,6 @@ config NET_VENDOR_DLINK
 
 if NET_VENDOR_DLINK
 
-config DE600
-	tristate "D-Link DE600 pocket adapter support"
-	depends on PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de600.
-
-config DE620
-	tristate "D-Link DE620 pocket adapter support"
-	depends on PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de620.
-
 config DL2K
 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
 	depends on PCI
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
index c705eaa4f5b2..40085f67157b 100644
--- a/drivers/net/ethernet/dlink/Makefile
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -2,7 +2,5 @@
 # Makefile for the D-Link network device drivers.
 #
 
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_SUNDANCE) += sundance.o
diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c
deleted file mode 100644
index 414f0eea1049..000000000000
--- a/drivers/net/ethernet/dlink/de600.c
+++ /dev/null
@@ -1,529 +0,0 @@
-static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj0rn@blox.se)\n";
-/*
- *	de600.c
- *
- *	Linux driver for the D-Link DE-600 Ethernet pocket adapter.
- *
- *	Portions (C) Copyright 1993, 1994 by Bjorn Ekwall
- *	The Author may be reached as bj0rn@blox.se
- *
- *	Based on adapter information gathered from DE600.ASM by D-Link Inc.,
- *	as included on disk C in the v.2.11 of PC/TCP from FTP Software.
- *	For DE600.asm:
- *		Portions (C) Copyright 1990 D-Link, Inc.
- *		Copyright, 1988-1992, Russell Nelson, Crynwr Software
- *
- *	Adapted to the sample network driver core for linux,
- *	written by: Donald Becker <becker@super.org>
- *		(Now at <becker@scyld.com>)
- *
- **************************************************************/
-/*
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2, or (at your option)
- *	any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- **************************************************************/
-
-/* Add more time here if your adapter won't work OK: */
-#define DE600_SLOW_DOWN	udelay(delay_time)
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/io.h>
-
-#include "de600.h"
-
-static bool check_lost = true;
-module_param(check_lost, bool, 0);
-MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
-
-static unsigned int delay_time = 10;
-module_param(delay_time, int, 0);
-MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds");
-
-
-/*
- * D-Link driver variables:
- */
-
-static volatile int		rx_page;
-
-#define TX_PAGES 2
-static volatile int		tx_fifo[TX_PAGES];
-static volatile int		tx_fifo_in;
-static volatile int		tx_fifo_out;
-static volatile int		free_tx_pages = TX_PAGES;
-static int			was_down;
-static DEFINE_SPINLOCK(de600_lock);
-
-static inline u8 de600_read_status(struct net_device *dev)
-{
-	u8 status;
-
-	outb_p(STATUS, DATA_PORT);
-	status = inb(STATUS_PORT);
-	outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);
-
-	return status;
-}
-
-static inline u8 de600_read_byte(unsigned char type, struct net_device *dev)
-{
-	/* dev used by macros */
-	u8 lo;
-	outb_p((type), DATA_PORT);
-	lo = ((unsigned char)inb(STATUS_PORT)) >> 4;
-	outb_p((type) | HI_NIBBLE, DATA_PORT);
-	return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;
-}
-
-/*
- * Open/initialize the board.  This is called (in the current kernel)
- * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is a non-reboot way to recover if something goes wrong.
- */
-
-static int de600_open(struct net_device *dev)
-{
-	unsigned long flags;
-	int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev);
-	if (ret) {
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
-		return ret;
-	}
-	spin_lock_irqsave(&de600_lock, flags);
-	ret = adapter_init(dev);
-	spin_unlock_irqrestore(&de600_lock, flags);
-	return ret;
-}
-
-/*
- * The inverse routine to de600_open().
- */
-
-static int de600_close(struct net_device *dev)
-{
-	select_nic();
-	rx_page = 0;
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-	de600_put_command(0);
-	select_prn();
-	free_irq(DE600_IRQ, dev);
-	return 0;
-}
-
-static inline void trigger_interrupt(struct net_device *dev)
-{
-	de600_put_command(FLIP_IRQ);
-	select_prn();
-	DE600_SLOW_DOWN;
-	select_nic();
-	de600_put_command(0);
-}
-
-/*
- * Copy a buffer to the adapter transmit page memory.
- * Start sending.
- */
-
-static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	int	transmit_from;
-	int	len;
-	int	tickssofar;
-	u8	*buffer = skb->data;
-	int	i;
-
-	if (free_tx_pages <= 0) {	/* Do timeouts, to avoid hangs. */
-		tickssofar = jiffies - dev_trans_start(dev);
-		if (tickssofar < HZ/20)
-			return NETDEV_TX_BUSY;
-		/* else */
-		printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
-		/* Restart the adapter. */
-		spin_lock_irqsave(&de600_lock, flags);
-		if (adapter_init(dev)) {
-			spin_unlock_irqrestore(&de600_lock, flags);
-			return NETDEV_TX_BUSY;
-		}
-		spin_unlock_irqrestore(&de600_lock, flags);
-	}
-
-	/* Start real output */
-	pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
-
-	if ((len = skb->len) < RUNT)
-		len = RUNT;
-
-	spin_lock_irqsave(&de600_lock, flags);
-	select_nic();
-	tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
-	tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
-
-	if(check_lost)
-	{
-		/* This costs about 40 instructions per packet... */
-		de600_setup_address(NODE_ADDRESS, RW_ADDR);
-		de600_read_byte(READ_DATA, dev);
-		if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
-			if (adapter_init(dev)) {
-				spin_unlock_irqrestore(&de600_lock, flags);
-				return NETDEV_TX_BUSY;
-			}
-		}
-	}
-
-	de600_setup_address(transmit_from, RW_ADDR);
-	for (i = 0;  i < skb->len ; ++i, ++buffer)
-		de600_put_byte(*buffer);
-	for (; i < len; ++i)
-		de600_put_byte(0);
-
-	if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
-		dev->trans_start = jiffies;
-		netif_start_queue(dev); /* allow more packets into adapter */
-		/* Send page and generate a faked interrupt */
-		de600_setup_address(transmit_from, TX_ADDR);
-		de600_put_command(TX_ENABLE);
-	}
-	else {
-		if (free_tx_pages)
-			netif_start_queue(dev);
-		else
-			netif_stop_queue(dev);
-		select_prn();
-	}
-	spin_unlock_irqrestore(&de600_lock, flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-
-static irqreturn_t de600_interrupt(int irq, void *dev_id)
-{
-	struct net_device	*dev = dev_id;
-	u8		irq_status;
-	int		retrig = 0;
-	int		boguscount = 0;
-
-	spin_lock(&de600_lock);
-
-	select_nic();
-	irq_status = de600_read_status(dev);
-
-	do {
-		pr_debug("de600_interrupt (%02X)\n", irq_status);
-
-		if (irq_status & RX_GOOD)
-			de600_rx_intr(dev);
-		else if (!(irq_status & RX_BUSY))
-			de600_put_command(RX_ENABLE);
-
-		/* Any transmission in progress? */
-		if (free_tx_pages < TX_PAGES)
-			retrig = de600_tx_intr(dev, irq_status);
-		else
-			retrig = 0;
-
-		irq_status = de600_read_status(dev);
-	} while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );
-	/*
-	 * Yeah, it _looks_ like busy waiting, smells like busy waiting
-	 * and I know it's not PC, but please, it will only occur once
-	 * in a while and then only for a loop or so (< 1ms for sure!)
-	 */
-
-	/* Enable adapter interrupts */
-	select_prn();
-	if (retrig)
-		trigger_interrupt(dev);
-	spin_unlock(&de600_lock);
-	return IRQ_HANDLED;
-}
-
-static int de600_tx_intr(struct net_device *dev, int irq_status)
-{
-	/*
-	 * Returns 1 if tx still not done
-	 */
-
-	/* Check if current transmission is done yet */
-	if (irq_status & TX_BUSY)
-		return 1; /* tx not done, try again */
-
-	/* else */
-	/* If last transmission OK then bump fifo index */
-	if (!(irq_status & TX_FAILED16)) {
-		tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
-		++free_tx_pages;
-		dev->stats.tx_packets++;
-		netif_wake_queue(dev);
-	}
-
-	/* More to send, or resend last packet? */
-	if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {
-		dev->trans_start = jiffies;
-		de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);
-		de600_put_command(TX_ENABLE);
-		return 1;
-	}
-	/* else */
-
-	return 0;
-}
-
-/*
- * We have a good packet, get it out of the adapter.
- */
-static void de600_rx_intr(struct net_device *dev)
-{
-	struct sk_buff	*skb;
-	int		i;
-	int		read_from;
-	int		size;
-	unsigned char	*buffer;
-
-	/* Get size of received packet */
-	size = de600_read_byte(RX_LEN, dev);	/* low byte */
-	size += (de600_read_byte(RX_LEN, dev) << 8);	/* high byte */
-	size -= 4;	/* Ignore trailing 4 CRC-bytes */
-
-	/* Tell adapter where to store next incoming packet, enable receiver */
-	read_from = rx_page_adr();
-	next_rx_page();
-	de600_put_command(RX_ENABLE);
-
-	if ((size < 32)  ||  (size > 1535)) {
-		printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
-		if (size > 10000)
-			adapter_init(dev);
-		return;
-	}
-
-	skb = netdev_alloc_skb(dev, size + 2);
-	if (skb == NULL) {
-		printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
-		return;
-	}
-	/* else */
-
-	skb_reserve(skb,2);	/* Align */
-
-	/* 'skb->data' points to the start of sk_buff data area. */
-	buffer = skb_put(skb,size);
-
-	/* copy the packet into the buffer */
-	de600_setup_address(read_from, RW_ADDR);
-	for (i = size; i > 0; --i, ++buffer)
-		*buffer = de600_read_byte(READ_DATA, dev);
-
-	skb->protocol=eth_type_trans(skb,dev);
-
-	netif_rx(skb);
-
-	/* update stats */
-	dev->stats.rx_packets++; /* count all receives */
-	dev->stats.rx_bytes += size; /* count all received bytes */
-
-	/*
-	 * If any worth-while packets have been received, netif_rx()
-	 * will work on them when we get to the tasklets.
-	 */
-}
-
-static const struct net_device_ops de600_netdev_ops = {
-	.ndo_open		= de600_open,
-	.ndo_stop		= de600_close,
-	.ndo_start_xmit		= de600_start_xmit,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-
-static struct net_device * __init de600_probe(void)
-{
-	int	i;
-	struct net_device *dev;
-	int err;
-
-	dev = alloc_etherdev(0);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-
-	if (!request_region(DE600_IO, 3, "de600")) {
-		printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
-		err = -EBUSY;
-		goto out;
-	}
-
-	printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
-	/* Alpha testers must have the version number to report bugs. */
-	pr_debug("%s", version);
-
-	/* probe for adapter */
-	err = -ENODEV;
-	rx_page = 0;
-	select_nic();
-	(void)de600_read_status(dev);
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-	if (de600_read_status(dev) & 0xf0) {
-		printk(": not at I/O %#3x.\n", DATA_PORT);
-		goto out1;
-	}
-
-	/*
-	 * Maybe we found one,
-	 * have to check if it is a D-Link DE-600 adapter...
-	 */
-
-	/* Get the adapter ethernet address from the ROM */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	for (i = 0; i < ETH_ALEN; i++) {
-		dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
-		dev->broadcast[i] = 0xff;
-	}
-
-	/* Check magic code */
-	if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
-		/* OK, install real address */
-		dev->dev_addr[0] = 0x00;
-		dev->dev_addr[1] = 0x80;
-		dev->dev_addr[2] = 0xc8;
-		dev->dev_addr[3] &= 0x0f;
-		dev->dev_addr[3] |= 0x70;
-	} else {
-		printk(" not identified in the printer port\n");
-		goto out1;
-	}
-
-	printk(", Ethernet Address: %pM\n", dev->dev_addr);
-
-	dev->netdev_ops = &de600_netdev_ops;
-
-	dev->flags&=~IFF_MULTICAST;
-
-	select_prn();
-
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-
-	return dev;
-
-out1:
-	release_region(DE600_IO, 3);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static int adapter_init(struct net_device *dev)
-{
-	int	i;
-
-	select_nic();
-	rx_page = 0; /* used by RESET */
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-
-	/* Check if it is still there... */
-	/* Get the some bytes of the adapter ethernet address from the ROM */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	de600_read_byte(READ_DATA, dev);
-	if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
-	    (de600_read_byte(READ_DATA, dev) != 0x15)) {
-	/* was: if (de600_read_status(dev) & 0xf0) { */
-		printk("Something has happened to the DE-600!  Please check it and do a new ifconfig!\n");
-		/* Goodbye, cruel world... */
-		dev->flags &= ~IFF_UP;
-		de600_close(dev);
-		was_down = 1;
-		netif_stop_queue(dev); /* Transmit busy...  */
-		return 1; /* failed */
-	}
-
-	if (was_down) {
-		printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
-		was_down = 0;
-	}
-
-	tx_fifo_in = 0;
-	tx_fifo_out = 0;
-	free_tx_pages = TX_PAGES;
-
-
-	/* set the ether address. */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	for (i = 0; i < ETH_ALEN; i++)
-		de600_put_byte(dev->dev_addr[i]);
-
-	/* where to start saving incoming packets */
-	rx_page = RX_BP | RX_BASE_PAGE;
-	de600_setup_address(MEM_4K, RW_ADDR);
-	/* Enable receiver */
-	de600_put_command(RX_ENABLE);
-	select_prn();
-
-	netif_start_queue(dev);
-
-	return 0; /* OK */
-}
-
-static struct net_device *de600_dev;
-
-static int __init de600_init(void)
-{
-	de600_dev = de600_probe();
-	if (IS_ERR(de600_dev))
-		return PTR_ERR(de600_dev);
-	return 0;
-}
-
-static void __exit de600_exit(void)
-{
-	unregister_netdev(de600_dev);
-	release_region(DE600_IO, 3);
-	free_netdev(de600_dev);
-}
-
-module_init(de600_init);
-module_exit(de600_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h
deleted file mode 100644
index e80ecbabcf4e..000000000000
--- a/drivers/net/ethernet/dlink/de600.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/**************************************************
- *                                                *
- * Definition of D-Link Ethernet Pocket adapter   *
- *                                                *
- **************************************************/
-/*
- * D-Link Ethernet pocket adapter ports
- */
-/*
- * OK, so I'm cheating, but there are an awful lot of
- * reads and writes in order to get anything in and out
- * of the DE-600 with 4 bits at a time in the parallel port,
- * so every saved instruction really helps :-)
- */
-
-#ifndef DE600_IO
-#define DE600_IO	0x378
-#endif
-
-#define DATA_PORT	(DE600_IO)
-#define STATUS_PORT	(DE600_IO + 1)
-#define COMMAND_PORT	(DE600_IO + 2)
-
-#ifndef DE600_IRQ
-#define DE600_IRQ	7
-#endif
-/*
- * It really should look like this, and autoprobing as well...
- *
-#define DATA_PORT	(dev->base_addr + 0)
-#define STATUS_PORT	(dev->base_addr + 1)
-#define COMMAND_PORT	(dev->base_addr + 2)
-#define DE600_IRQ	dev->irq
- */
-
-/*
- * D-Link COMMAND_PORT commands
- */
-#define SELECT_NIC	0x04 /* select Network Interface Card */
-#define SELECT_PRN	0x1c /* select Printer */
-#define NML_PRN		0xec /* normal Printer situation */
-#define IRQEN		0x10 /* enable IRQ line */
-
-/*
- * D-Link STATUS_PORT
- */
-#define RX_BUSY		0x80
-#define RX_GOOD		0x40
-#define TX_FAILED16	0x10
-#define TX_BUSY		0x08
-
-/*
- * D-Link DATA_PORT commands
- * command in low 4 bits
- * data in high 4 bits
- * select current data nibble with HI_NIBBLE bit
- */
-#define WRITE_DATA	0x00 /* write memory */
-#define READ_DATA	0x01 /* read memory */
-#define STATUS		0x02 /* read  status register */
-#define COMMAND		0x03 /* write command register (see COMMAND below) */
-#define NULL_COMMAND	0x04 /* null command */
-#define RX_LEN		0x05 /* read  received packet length */
-#define TX_ADDR		0x06 /* set adapter transmit memory address */
-#define RW_ADDR		0x07 /* set adapter read/write memory address */
-#define HI_NIBBLE	0x08 /* read/write the high nibble of data,
-				or-ed with rest of command */
-
-/*
- * command register, accessed through DATA_PORT with low bits = COMMAND
- */
-#define RX_ALL		0x01 /* PROMISCUOUS */
-#define RX_BP		0x02 /* default: BROADCAST & PHYSICAL ADDRESS */
-#define RX_MBP		0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */
-
-#define TX_ENABLE	0x04 /* bit 2 */
-#define RX_ENABLE	0x08 /* bit 3 */
-
-#define RESET		0x80 /* set bit 7 high */
-#define STOP_RESET	0x00 /* set bit 7 low */
-
-/*
- * data to command register
- * (high 4 bits in write to DATA_PORT)
- */
-#define RX_PAGE2_SELECT	0x10 /* bit 4, only 2 pages to select */
-#define RX_BASE_PAGE	0x20 /* bit 5, always set when specifying RX_ADDR */
-#define FLIP_IRQ	0x40 /* bit 6 */
-
-/*
- * D-Link adapter internal memory:
- *
- * 0-2K 1:st transmit page (send from pointer up to 2K)
- * 2-4K	2:nd transmit page (send from pointer up to 4K)
- *
- * 4-6K 1:st receive page (data from 4K upwards)
- * 6-8K 2:nd receive page (data from 6K upwards)
- *
- * 8K+	Adapter ROM (contains magic code and last 3 bytes of Ethernet address)
- */
-#define MEM_2K		0x0800 /* 2048 */
-#define MEM_4K		0x1000 /* 4096 */
-#define MEM_6K		0x1800 /* 6144 */
-#define NODE_ADDRESS	0x2000 /* 8192 */
-
-#define RUNT 60		/* Too small Ethernet packet */
-
-/**************************************************
- *                                                *
- *             End of definition                  *
- *                                                *
- **************************************************/
-
-/*
- * Index to functions, as function prototypes.
- */
-/* Routines used internally. (See "convenience macros") */
-static u8	de600_read_status(struct net_device *dev);
-static u8	de600_read_byte(unsigned char type, struct net_device *dev);
-
-/* Put in the device structure. */
-static int	de600_open(struct net_device *dev);
-static int	de600_close(struct net_device *dev);
-static int	de600_start_xmit(struct sk_buff *skb, struct net_device *dev);
-
-/* Dispatch from interrupts. */
-static irqreturn_t de600_interrupt(int irq, void *dev_id);
-static int	de600_tx_intr(struct net_device *dev, int irq_status);
-static void	de600_rx_intr(struct net_device *dev);
-
-/* Initialization */
-static void	trigger_interrupt(struct net_device *dev);
-static int	adapter_init(struct net_device *dev);
-
-/*
- * Convenience macros/functions for D-Link adapter
- */
-
-#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN
-#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN
-
-/* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */
-#define de600_put_byte(data) ( \
-	outb_p(((data) << 4)   | WRITE_DATA            , DATA_PORT), \
-	outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT))
-
-/*
- * The first two outb_p()'s below could perhaps be deleted if there
- * would be more delay in the last two. Not certain about it yet...
- */
-#define de600_put_command(cmd) ( \
-	outb_p(( rx_page        << 4)   | COMMAND            , DATA_PORT), \
-	outb_p(( rx_page        & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \
-	outb_p(((rx_page | cmd) << 4)   | COMMAND            , DATA_PORT), \
-	outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT))
-
-#define de600_setup_address(addr,type) ( \
-	outb_p((((addr) << 4) & 0xf0) | type            , DATA_PORT), \
-	outb_p(( (addr)       & 0xf0) | type | HI_NIBBLE, DATA_PORT), \
-	outb_p((((addr) >> 4) & 0xf0) | type            , DATA_PORT), \
-	outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT))
-
-#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K))
-
-/* Flip bit, only 2 pages */
-#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT)
-
-#define tx_page_adr(a) (((a) + 1) * MEM_2K)
diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c
deleted file mode 100644
index 2e2bc60ee811..000000000000
--- a/drivers/net/ethernet/dlink/de620.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- *	de620.c $Revision: 1.40 $ BETA
- *
- *
- *	Linux driver for the D-Link DE-620 Ethernet pocket adapter.
- *
- *	Portions (C) Copyright 1993, 1994 by Bjorn Ekwall <bj0rn@blox.se>
- *
- *	Based on adapter information gathered from DOS packetdriver
- *	sources from D-Link Inc:  (Special thanks to Henry Ngai of D-Link.)
- *		Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992
- *		Copyright, 1988, Russell Nelson, Crynwr Software
- *
- *	Adapted to the sample network driver core for linux,
- *	written by: Donald Becker <becker@super.org>
- *		(Now at <becker@scyld.com>)
- *
- *	Valuable assistance from:
- *		J. Joshua Kopper <kopper@rtsg.mot.com>
- *		Olav Kvittem <Olav.Kvittem@uninett.no>
- *		Germano Caronni <caronni@nessie.cs.id.ethz.ch>
- *		Jeremy Fitzhardinge <jeremy@suite.sw.oz.au>
- *
- *****************************************************************************/
-/*
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2, or (at your option)
- *	any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *****************************************************************************/
-static const char version[] =
-	"de620.c: $Revision: 1.40 $,  Bjorn Ekwall <bj0rn@blox.se>\n";
-
-/***********************************************************************
- *
- * "Tuning" section.
- *
- * Compile-time options: (see below for descriptions)
- * -DDE620_IO=0x378	(lpt1)
- * -DDE620_IRQ=7	(lpt1)
- * -DSHUTDOWN_WHEN_LOST
- * -DCOUNT_LOOPS
- * -DLOWSPEED
- * -DREAD_DELAY
- * -DWRITE_DELAY
- */
-
-/*
- * This driver assumes that the printer port is a "normal",
- * dumb, uni-directional port!
- * If your port is "fancy" in any way, please try to set it to "normal"
- * with your BIOS setup.  I have no access to machines with bi-directional
- * ports, so I can't test such a driver :-(
- * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...)
- *
- * There are some clones of DE620 out there, with different names.
- * If the current driver does not recognize a clone, try to change
- * the following #define to:
- *
- * #define DE620_CLONE 1
- */
-#define DE620_CLONE 0
-
-/*
- * If the adapter has problems with high speeds, enable this #define
- * otherwise full printerport speed will be attempted.
- *
- * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED
- *
-#define LOWSPEED
- */
-
-#ifndef READ_DELAY
-#define READ_DELAY 100	/* adapter internal read delay in 100ns units */
-#endif
-
-#ifndef WRITE_DELAY
-#define WRITE_DELAY 100	/* adapter internal write delay in 100ns units */
-#endif
-
-/*
- * Enable this #define if you want the adapter to do a "ifconfig down" on
- * itself when we have detected that something is possibly wrong with it.
- * The default behaviour is to retry with "adapter_init()" until success.
- * This should be used for debugging purposes only.
- *
-#define SHUTDOWN_WHEN_LOST
- */
-
-#ifdef LOWSPEED
-/*
- * Enable this #define if you want to see debugging output that show how long
- * we have to wait before the DE-620 is ready for the next read/write/command.
- *
-#define COUNT_LOOPS
- */
-#endif
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/io.h>
-
-/* Constant definitions for the DE-620 registers, commands and bits */
-#include "de620.h"
-
-typedef unsigned char byte;
-
-/*******************************************************
- *                                                     *
- * Definition of D-Link DE-620 Ethernet Pocket adapter *
- * See also "de620.h"                                  *
- *                                                     *
- *******************************************************/
-#ifndef DE620_IO /* Compile-time configurable */
-#define DE620_IO 0x378
-#endif
-
-#ifndef DE620_IRQ /* Compile-time configurable */
-#define DE620_IRQ	7
-#endif
-
-#define DATA_PORT	(dev->base_addr)
-#define STATUS_PORT	(dev->base_addr + 1)
-#define COMMAND_PORT	(dev->base_addr + 2)
-
-#define RUNT 60		/* Too small Ethernet packet */
-#define GIANT 1514	/* largest legal size packet, no fcs */
-
-/*
- * Force media with insmod:
- *	insmod de620.o bnc=1
- * or
- *	insmod de620.o utp=1
- *
- * Force io and/or irq with insmod:
- *	insmod de620.o io=0x378 irq=7
- *
- * Make a clone skip the Ethernet-address range check:
- *	insmod de620.o clone=1
- */
-static int bnc;
-static int utp;
-static int io  = DE620_IO;
-static int irq = DE620_IRQ;
-static int clone = DE620_CLONE;
-
-static spinlock_t de620_lock;
-
-module_param(bnc, int, 0);
-module_param(utp, int, 0);
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(clone, int, 0);
-MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");
-MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");
-MODULE_PARM_DESC(io, "DE-620 I/O base address,required");
-MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");
-MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");
-
-/***********************************************
- *                                             *
- * Index to functions, as function prototypes. *
- *                                             *
- ***********************************************/
-
-/*
- * Routines used internally. (See also "convenience macros.. below")
- */
-
-/* Put in the device structure. */
-static int	de620_open(struct net_device *);
-static int	de620_close(struct net_device *);
-static void	de620_set_multicast_list(struct net_device *);
-static int	de620_start_xmit(struct sk_buff *, struct net_device *);
-
-/* Dispatch from interrupts. */
-static irqreturn_t de620_interrupt(int, void *);
-static int	de620_rx_intr(struct net_device *);
-
-/* Initialization */
-static int	adapter_init(struct net_device *);
-static int	read_eeprom(struct net_device *);
-
-
-/*
- * D-Link driver variables:
- */
-#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX
-#define	TCR_DEF RXPB			/* not used: | TXSUCINT | T16INT */
-#define DE620_RX_START_PAGE 12		/* 12 pages (=3k) reserved for tx */
-#define DEF_NIC_CMD IRQEN | ICEN | DS1
-
-static volatile byte	NIC_Cmd;
-static volatile byte	next_rx_page;
-static byte		first_rx_page;
-static byte		last_rx_page;
-static byte		EIPRegister;
-
-static struct nic {
-	byte	NodeID[6];
-	byte	RAM_Size;
-	byte	Model;
-	byte	Media;
-	byte	SCR;
-} nic_data;
-
-/**********************************************************
- *                                                        *
- * Convenience macros/functions for D-Link DE-620 adapter *
- *                                                        *
- **********************************************************/
-#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1))
-#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT);
-
-/* Check for ready-status, and return a nibble (high 4 bits) for data input */
-#ifdef COUNT_LOOPS
-static int tot_cnt;
-#endif
-static inline byte
-de620_ready(struct net_device *dev)
-{
-	byte value;
-	register short int cnt = 0;
-
-	while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000))
-		++cnt;
-
-#ifdef COUNT_LOOPS
-	tot_cnt += cnt;
-#endif
-	return value & 0xf0; /* nibble */
-}
-
-static inline void
-de620_send_command(struct net_device *dev, byte cmd)
-{
-	de620_ready(dev);
-	if (cmd == W_DUMMY)
-		outb(NIC_Cmd, COMMAND_PORT);
-
-	outb(cmd, DATA_PORT);
-
-	outb(NIC_Cmd ^ CS0, COMMAND_PORT);
-	de620_ready(dev);
-	outb(NIC_Cmd, COMMAND_PORT);
-}
-
-static inline void
-de620_put_byte(struct net_device *dev, byte value)
-{
-	/* The de620_ready() makes 7 loops, on the average, on a DX2/66 */
-	de620_ready(dev);
-	outb(value, DATA_PORT);
-	de620_flip_ds(dev);
-}
-
-static inline byte
-de620_read_byte(struct net_device *dev)
-{
-	byte value;
-
-	/* The de620_ready() makes 7 loops, on the average, on a DX2/66 */
-	value = de620_ready(dev); /* High nibble */
-	de620_flip_ds(dev);
-	value |= de620_ready(dev) >> 4; /* Low nibble */
-	return value;
-}
-
-static inline void
-de620_write_block(struct net_device *dev, byte *buffer, int count, int pad)
-{
-#ifndef LOWSPEED
-	byte uflip = NIC_Cmd ^ (DS0 | DS1);
-	byte dflip = NIC_Cmd;
-#else /* LOWSPEED */
-#ifdef COUNT_LOOPS
-	int bytes = count;
-#endif /* COUNT_LOOPS */
-#endif /* LOWSPEED */
-
-#ifdef LOWSPEED
-#ifdef COUNT_LOOPS
-	tot_cnt = 0;
-#endif /* COUNT_LOOPS */
-	/* No further optimization useful, the limit is in the adapter. */
-	for ( ; count > 0; --count, ++buffer) {
-		de620_put_byte(dev,*buffer);
-	}
-	for ( count = pad ; count > 0; --count, ++buffer) {
-		de620_put_byte(dev, 0);
-	}
-	de620_send_command(dev,W_DUMMY);
-#ifdef COUNT_LOOPS
-	/* trial debug output: loops per byte in de620_ready() */
-	printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1)));
-#endif /* COUNT_LOOPS */
-#else /* not LOWSPEED */
-	for ( ; count > 0; count -=2) {
-		outb(*buffer++, DATA_PORT);
-		outb(uflip, COMMAND_PORT);
-		outb(*buffer++, DATA_PORT);
-		outb(dflip, COMMAND_PORT);
-	}
-	de620_send_command(dev,W_DUMMY);
-#endif /* LOWSPEED */
-}
-
-static inline void
-de620_read_block(struct net_device *dev, byte *data, int count)
-{
-#ifndef LOWSPEED
-	byte value;
-	byte uflip = NIC_Cmd ^ (DS0 | DS1);
-	byte dflip = NIC_Cmd;
-#else /* LOWSPEED */
-#ifdef COUNT_LOOPS
-	int bytes = count;
-
-	tot_cnt = 0;
-#endif /* COUNT_LOOPS */
-#endif /* LOWSPEED */
-
-#ifdef LOWSPEED
-	/* No further optimization useful, the limit is in the adapter. */
-	while (count-- > 0) {
-		*data++ = de620_read_byte(dev);
-		de620_flip_ds(dev);
-	}
-#ifdef COUNT_LOOPS
-	/* trial debug output: loops per byte in de620_ready() */
-	printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1)));
-#endif /* COUNT_LOOPS */
-#else /* not LOWSPEED */
-	while (count-- > 0) {
-		value = inb(STATUS_PORT) & 0xf0; /* High nibble */
-		outb(uflip, COMMAND_PORT);
-		*data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */
-		outb(dflip , COMMAND_PORT);
-	}
-#endif /* LOWSPEED */
-}
-
-static inline void
-de620_set_delay(struct net_device *dev)
-{
-	de620_ready(dev);
-	outb(W_DFR, DATA_PORT);
-	outb(NIC_Cmd ^ CS0, COMMAND_PORT);
-
-	de620_ready(dev);
-#ifdef LOWSPEED
-	outb(WRITE_DELAY, DATA_PORT);
-#else
-	outb(0, DATA_PORT);
-#endif
-	de620_flip_ds(dev);
-
-	de620_ready(dev);
-#ifdef LOWSPEED
-	outb(READ_DELAY, DATA_PORT);
-#else
-	outb(0, DATA_PORT);
-#endif
-	de620_flip_ds(dev);
-}
-
-static inline void
-de620_set_register(struct net_device *dev, byte reg, byte value)
-{
-	de620_ready(dev);
-	outb(reg, DATA_PORT);
-	outb(NIC_Cmd ^ CS0, COMMAND_PORT);
-
-	de620_put_byte(dev, value);
-}
-
-static inline byte
-de620_get_register(struct net_device *dev, byte reg)
-{
-	byte value;
-
-	de620_send_command(dev,reg);
-	value = de620_read_byte(dev);
-	de620_send_command(dev,W_DUMMY);
-
-	return value;
-}
-
-/*********************************************************************
- *
- * Open/initialize the board.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is a non-reboot way to recover if something goes wrong.
- *
- */
-static int de620_open(struct net_device *dev)
-{
-	int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev);
-	if (ret) {
-		printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq);
-		return ret;
-	}
-
-	if (adapter_init(dev)) {
-		ret = -EIO;
-		goto out_free_irq;
-	}
-
-	netif_start_queue(dev);
-	return 0;
-
-out_free_irq:
-	free_irq(dev->irq, dev);
-	return ret;
-}
-
-/************************************************
- *
- * The inverse routine to de620_open().
- *
- */
-
-static int de620_close(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-	/* disable recv */
-	de620_set_register(dev, W_TCR, RXOFF);
-	free_irq(dev->irq, dev);
-	return 0;
-}
-
-/*********************************************
- *
- * Set or clear the multicast filter for this adaptor.
- * (no real multicast implemented for the DE-620, but she can be promiscuous...)
- *
- */
-
-static void de620_set_multicast_list(struct net_device *dev)
-{
-	if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
-	{ /* Enable promiscuous mode */
-		de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
-	}
-	else
-	{ /* Disable promiscuous mode, use normal mode */
-		de620_set_register(dev, W_TCR, TCR_DEF);
-	}
-}
-
-/*******************************************************
- *
- * Handle timeouts on transmit
- */
-
-static void de620_timeout(struct net_device *dev)
-{
-	printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem");
-	/* Restart the adapter. */
-	if (!adapter_init(dev)) /* maybe close it */
-		netif_wake_queue(dev);
-}
-
-/*******************************************************
- *
- * Copy a buffer to the adapter transmit page memory.
- * Start sending.
- */
-static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	int len;
-	byte *buffer = skb->data;
-	byte using_txbuf;
-
-	using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */
-
-	netif_stop_queue(dev);
-
-
-	if ((len = skb->len) < RUNT)
-		len = RUNT;
-	if (len & 1) /* send an even number of bytes */
-		++len;
-
-	/* Start real output */
-
-	spin_lock_irqsave(&de620_lock, flags);
-	pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",
-		(int)skb->len, using_txbuf);
-
-	/* select a free tx buffer. if there is one... */
-	switch (using_txbuf) {
-	default: /* both are free: use TXBF0 */
-	case TXBF1: /* use TXBF0 */
-		de620_send_command(dev,W_CR | RW0);
-		using_txbuf |= TXBF0;
-		break;
-
-	case TXBF0: /* use TXBF1 */
-		de620_send_command(dev,W_CR | RW1);
-		using_txbuf |= TXBF1;
-		break;
-
-	case (TXBF0 | TXBF1): /* NONE!!! */
-		printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name);
-		spin_unlock_irqrestore(&de620_lock, flags);
-		return NETDEV_TX_BUSY;
-	}
-	de620_write_block(dev, buffer, skb->len, len-skb->len);
-
-	if(!(using_txbuf == (TXBF0 | TXBF1)))
-		netif_wake_queue(dev);
-
-	dev->stats.tx_packets++;
-	spin_unlock_irqrestore(&de620_lock, flags);
-	dev_kfree_skb (skb);
-	return NETDEV_TX_OK;
-}
-
-/*****************************************************
- *
- * Handle the network interface interrupts.
- *
- */
-static irqreturn_t
-de620_interrupt(int irq_in, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	byte irq_status;
-	int bogus_count = 0;
-	int again = 0;
-
-	spin_lock(&de620_lock);
-
-	/* Read the status register (_not_ the status port) */
-	irq_status = de620_get_register(dev, R_STS);
-
-	pr_debug("de620_interrupt (%2.2X)\n", irq_status);
-
-	if (irq_status & RXGOOD) {
-		do {
-			again = de620_rx_intr(dev);
-			pr_debug("again=%d\n", again);
-		}
-		while (again && (++bogus_count < 100));
-	}
-
-	if(de620_tx_buffs(dev) != (TXBF0 | TXBF1))
-		netif_wake_queue(dev);
-
-	spin_unlock(&de620_lock);
-	return IRQ_HANDLED;
-}
-
-/**************************************
- *
- * Get a packet from the adapter
- *
- * Send it "upstairs"
- *
- */
-static int de620_rx_intr(struct net_device *dev)
-{
-	struct header_buf {
-		byte		status;
-		byte		Rx_NextPage;
-		unsigned short	Rx_ByteCount;
-	} header_buf;
-	struct sk_buff *skb;
-	int size;
-	byte *buffer;
-	byte pagelink;
-	byte curr_page;
-
-	pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);
-
-	/* Tell the adapter that we are going to read data, and from where */
-	de620_send_command(dev, W_CR | RRN);
-	de620_set_register(dev, W_RSA1, next_rx_page);
-	de620_set_register(dev, W_RSA0, 0);
-
-	/* Deep breath, and away we goooooo */
-	de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));
-	pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",
-		header_buf.status, header_buf.Rx_NextPage,
-		header_buf.Rx_ByteCount);
-
-	/* Plausible page header? */
-	pagelink = header_buf.Rx_NextPage;
-	if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) {
-		/* Ouch... Forget it! Skip all and start afresh... */
-		printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name);
-		/* You win some, you lose some. And sometimes plenty... */
-		adapter_init(dev);
-		netif_wake_queue(dev);
-		dev->stats.rx_over_errors++;
-		return 0;
-	}
-
-	/* OK, this look good, so far. Let's see if it's consistent... */
-	/* Let's compute the start of the next packet, based on where we are */
-	pagelink = next_rx_page +
-		((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8);
-
-	/* Are we going to wrap around the page counter? */
-	if (pagelink > last_rx_page)
-		pagelink -= (last_rx_page - first_rx_page + 1);
-
-	/* Is the _computed_ next page number equal to what the adapter says? */
-	if (pagelink != header_buf.Rx_NextPage) {
-		/* Naah, we'll skip this packet. Probably bogus data as well */
-		printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name);
-		next_rx_page = header_buf.Rx_NextPage; /* at least a try... */
-		de620_send_command(dev, W_DUMMY);
-		de620_set_register(dev, W_NPRF, next_rx_page);
-		dev->stats.rx_over_errors++;
-		return 0;
-	}
-	next_rx_page = pagelink;
-
-	size = header_buf.Rx_ByteCount - 4;
-	if ((size < RUNT) || (GIANT < size)) {
-		printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size);
-	}
-	else { /* Good packet? */
-		skb = netdev_alloc_skb(dev, size + 2);
-		if (skb == NULL) { /* Yeah, but no place to put it... */
-			printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
-			dev->stats.rx_dropped++;
-		}
-		else { /* Yep! Go get it! */
-			skb_reserve(skb,2);	/* Align */
-			/* skb->data points to the start of sk_buff data area */
-			buffer = skb_put(skb,size);
-			/* copy the packet into the buffer */
-			de620_read_block(dev, buffer, size);
-			pr_debug("Read %d bytes\n", size);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb); /* deliver it "upstairs" */
-			/* count all receives */
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += size;
-		}
-	}
-
-	/* Let's peek ahead to see if we have read the last current packet */
-	/* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */
-	curr_page = de620_get_register(dev, R_CPR);
-	de620_set_register(dev, W_NPRF, next_rx_page);
-	pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);
-
-	return next_rx_page != curr_page; /* That was slightly tricky... */
-}
-
-/*********************************************
- *
- * Reset the adapter to a known state
- *
- */
-static int adapter_init(struct net_device *dev)
-{
-	int i;
-	static int was_down;
-
-	if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */
-		EIPRegister = NCTL0;
-		if (nic_data.Media != 1)
-			EIPRegister |= NIS0;	/* not BNC */
-	}
-	else if (nic_data.Model == 2) { /* UTP */
-		EIPRegister = NCTL0 | NIS0;
-	}
-
-	if (utp)
-		EIPRegister = NCTL0 | NIS0;
-	if (bnc)
-		EIPRegister = NCTL0;
-
-	de620_send_command(dev, W_CR | RNOP | CLEAR);
-	de620_send_command(dev, W_CR | RNOP);
-
-	de620_set_register(dev, W_SCR, SCR_DEF);
-	/* disable recv to wait init */
-	de620_set_register(dev, W_TCR, RXOFF);
-
-	/* Set the node ID in the adapter */
-	for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */
-		de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]);
-	}
-
-	de620_set_register(dev, W_EIP, EIPRegister);
-
-	next_rx_page = first_rx_page = DE620_RX_START_PAGE;
-	if (nic_data.RAM_Size)
-		last_rx_page = nic_data.RAM_Size - 1;
-	else /* 64k RAM */
-		last_rx_page = 255;
-
-	de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/
-	de620_set_register(dev, W_EPR, last_rx_page);  /* End Page Register */
-	de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/
-	de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/
-	de620_send_command(dev, W_DUMMY);
-	de620_set_delay(dev);
-
-	/* Final sanity check: Anybody out there? */
-	/* Let's hope some bits from the statusregister make a good check */
-#define CHECK_MASK (  0 | TXSUC |  T16  |  0  | RXCRC | RXSHORT |  0  |  0  )
-#define CHECK_OK   (  0 |   0   |  0    |  0  |   0   |   0     |  0  |  0  )
-        /* success:   X     0      0       X      0       0        X     X  */
-        /* ignore:   EEDI                RXGOOD                   COLS  LNKS*/
-
-	if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) {
-		printk(KERN_ERR "%s: Something has happened to the DE-620!  Please check it"
-#ifdef SHUTDOWN_WHEN_LOST
-			" and do a new ifconfig"
-#endif
-			"! (%02x)\n", dev->name, i);
-#ifdef SHUTDOWN_WHEN_LOST
-		/* Goodbye, cruel world... */
-		dev->flags &= ~IFF_UP;
-		de620_close(dev);
-#endif
-		was_down = 1;
-		return 1; /* failed */
-	}
-	if (was_down) {
-		printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name);
-		was_down = 0;
-	}
-
-	/* All OK, go ahead... */
-	de620_set_register(dev, W_TCR, TCR_DEF);
-
-	return 0; /* all ok */
-}
-
-static const struct net_device_ops de620_netdev_ops = {
-	.ndo_open 		= de620_open,
-	.ndo_stop 		= de620_close,
-	.ndo_start_xmit 	= de620_start_xmit,
-	.ndo_tx_timeout 	= de620_timeout,
-	.ndo_set_rx_mode	= de620_set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/******************************************************************************
- *
- * Only start-up code below
- *
- */
-/****************************************
- *
- * Check if there is a DE-620 connected
- */
-struct net_device * __init de620_probe(int unit)
-{
-	byte checkbyte = 0xa5;
-	struct net_device *dev;
-	int err = -ENOMEM;
-	int i;
-
-	dev = alloc_etherdev(0);
-	if (!dev)
-		goto out;
-
-	spin_lock_init(&de620_lock);
-
-	/*
-	 * This is where the base_addr and irq gets set.
-	 * Tunable at compile-time and insmod-time
-	 */
-	dev->base_addr = io;
-	dev->irq       = irq;
-
-	/* allow overriding parameters on command line */
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-
-	pr_debug("%s", version);
-
-	printk(KERN_INFO "D-Link DE-620 pocket adapter");
-
-	if (!request_region(dev->base_addr, 3, "de620")) {
-		printk(" io 0x%3lX, which is busy.\n", dev->base_addr);
-		err = -EBUSY;
-		goto out1;
-	}
-
-	/* Initially, configure basic nibble mode, so we can read the EEPROM */
-	NIC_Cmd = DEF_NIC_CMD;
-	de620_set_register(dev, W_EIP, EIPRegister);
-
-	/* Anybody out there? */
-	de620_set_register(dev, W_CPR, checkbyte);
-	checkbyte = de620_get_register(dev, R_CPR);
-
-	if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) {
-		printk(" not identified in the printer port\n");
-		err = -ENODEV;
-		goto out2;
-	}
-
-	/* else, got it! */
-	dev->dev_addr[0] = nic_data.NodeID[0];
-	for (i = 1; i < ETH_ALEN; i++) {
-		dev->dev_addr[i] = nic_data.NodeID[i];
-		dev->broadcast[i] = 0xff;
-	}
-
-	printk(", Ethernet Address: %pM", dev->dev_addr);
-
-	printk(" (%dk RAM,",
-		(nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64);
-
-	if (nic_data.Media == 1)
-		printk(" BNC)\n");
-	else
-		printk(" UTP)\n");
-
-	dev->netdev_ops = &de620_netdev_ops;
-	dev->watchdog_timeo	= HZ*2;
-
-	/* base_addr and irq are already set, see above! */
-
-	/* dump eeprom */
-	pr_debug("\nEEPROM contents:\n"
-		"RAM_Size = 0x%02X\n"
-		"NodeID = %pM\n"
-		"Model = %d\n"
-		"Media = %d\n"
-		"SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,
-		nic_data.Model, nic_data.Media, nic_data.SCR);
-
-	err = register_netdev(dev);
-	if (err)
-		goto out2;
-	return dev;
-
-out2:
-	release_region(dev->base_addr, 3);
-out1:
-	free_netdev(dev);
-out:
-	return ERR_PTR(err);
-}
-
-/**********************************
- *
- * Read info from on-board EEPROM
- *
- * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_!
- */
-#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister);
-
-static unsigned short __init ReadAWord(struct net_device *dev, int from)
-{
-	unsigned short data;
-	int nbits;
-
-	/* cs   [__~~] SET SEND STATE */
-	/* di   [____]                */
-	/* sck  [_~~_]                */
-	sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4);
-
-	/* Send the 9-bit address from where we want to read the 16-bit word */
-	for (nbits = 9; nbits > 0; --nbits, from <<= 1) {
-		if (from & 0x0100) { /* bit set? */
-			/* cs    [~~~~] SEND 1 */
-			/* di    [~~~~]        */
-			/* sck   [_~~_]        */
-			sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6);
-		}
-		else {
-			/* cs    [~~~~] SEND 0 */
-			/* di    [____]        */
-			/* sck   [_~~_]        */
-			sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4);
-		}
-	}
-
-	/* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */
-	for (data = 0, nbits = 16; nbits > 0; --nbits) {
-		/* cs    [~~~~] SEND 0 */
-		/* di    [____]        */
-		/* sck   [_~~_]        */
-		sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4);
-		data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7);
-	}
-	/* cs    [____] RESET SEND STATE */
-	/* di    [____]                  */
-	/* sck   [_~~_]                  */
-	sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0);
-
-	return data;
-}
-
-static int __init read_eeprom(struct net_device *dev)
-{
-	unsigned short wrd;
-
-	/* D-Link Ethernet addresses are in the series  00:80:c8:7X:XX:XX:XX */
-	wrd = ReadAWord(dev, 0x1aa);	/* bytes 0 + 1 of NodeID */
-	if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */
-		return -1; /* Nope, not a DE-620 */
-	nic_data.NodeID[0] = wrd & 0xff;
-	nic_data.NodeID[1] = wrd >> 8;
-
-	wrd = ReadAWord(dev, 0x1ab);	/* bytes 2 + 3 of NodeID */
-	if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */
-		return -1; /* Nope, not a DE-620 */
-	nic_data.NodeID[2] = wrd & 0xff;
-	nic_data.NodeID[3] = wrd >> 8;
-
-	wrd = ReadAWord(dev, 0x1ac);	/* bytes 4 + 5 of NodeID */
-	nic_data.NodeID[4] = wrd & 0xff;
-	nic_data.NodeID[5] = wrd >> 8;
-
-	wrd = ReadAWord(dev, 0x1ad);	/* RAM size in pages (256 bytes). 0 = 64k */
-	nic_data.RAM_Size = (wrd >> 8);
-
-	wrd = ReadAWord(dev, 0x1ae);	/* hardware model (CT = 3) */
-	nic_data.Model = (wrd & 0xff);
-
-	wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */
-	nic_data.Media = (wrd & 0xff);
-
-	wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */
-	nic_data.SCR = (wrd >> 8);
-
-	return 0; /* no errors */
-}
-
-/******************************************************************************
- *
- * Loadable module skeleton
- *
- */
-#ifdef MODULE
-static struct net_device *de620_dev;
-
-int __init init_module(void)
-{
-	de620_dev = de620_probe(-1);
-	if (IS_ERR(de620_dev))
-		return PTR_ERR(de620_dev);
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	unregister_netdev(de620_dev);
-	release_region(de620_dev->base_addr, 3);
-	free_netdev(de620_dev);
-}
-#endif /* MODULE */
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/dlink/de620.h b/drivers/net/ethernet/dlink/de620.h
deleted file mode 100644
index e8d9a88f4cb5..000000000000
--- a/drivers/net/ethernet/dlink/de620.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*********************************************************
- *                                                       *
- * Definition of D-Link DE-620 Ethernet Pocket adapter   *
- *                                                       *
- *********************************************************/
-
-/* DE-620's CMD port Command */
-#define CS0		0x08	/* 1->0 command strobe */
-#define ICEN		0x04	/* 0=enable DL3520 host interface */
-#define DS0		0x02	/* 1->0 data strobe 0 */
-#define DS1		0x01	/* 1->0 data strobe 1 */
-
-#define WDIR		0x20	/* general 0=read  1=write */
-#define RDIR		0x00	/*  (not 100% confirm ) */
-#define PS2WDIR		0x00	/* ps/2 mode 1=read, 0=write */
-#define PS2RDIR		0x20
-
-#define IRQEN		0x10	/* 1 = enable printer IRQ line */
-#define SELECTIN	0x08	/* 1 = select printer */
-#define INITP		0x04	/* 0 = initial printer */
-#define AUTOFEED	0x02	/* 1 = printer auto form feed */
-#define STROBE		0x01	/* 0->1 data strobe */
-
-#define RESET		0x08
-#define NIS0		0x20	/* 0 = BNC, 1 = UTP */
-#define NCTL0		0x10
-
-/* DE-620 DIC Command */
-#define W_DUMMY		0x00	/* DIC reserved command */
-#define W_CR		0x20	/* DIC write command register */
-#define W_NPR		0x40	/* DIC write Next Page Register */
-#define W_TBR		0x60	/* DIC write Tx Byte Count 1 reg */
-#define W_RSA		0x80	/* DIC write Remote Start Addr 1 */
-
-/* DE-620's STAT port bits 7-4 */
-#define EMPTY		0x80	/* 1 = receive buffer empty */
-#define INTLEVEL	0x40	/* 1 = interrupt level is high */
-#define TXBF1		0x20	/* 1 = transmit buffer 1 is in use */
-#define TXBF0		0x10	/* 1 = transmit buffer 0 is in use */
-#define READY		0x08	/* 1 = h/w ready to accept cmd/data */
-
-/* IDC 1 Command */
-#define	W_RSA1		0xa0	/* write remote start address 1 */
-#define	W_RSA0		0xa1	/* write remote start address 0 */
-#define	W_NPRF		0xa2	/* write next page register NPR15-NPR8 */
-#define	W_DFR		0xa3	/* write delay factor register */
-#define	W_CPR		0xa4	/* write current page register */
-#define	W_SPR		0xa5	/* write start page register */
-#define	W_EPR		0xa6	/* write end page register */
-#define	W_SCR		0xa7	/* write system configuration register */
-#define	W_TCR		0xa8	/* write Transceiver Configuration reg */
-#define	W_EIP		0xa9	/* write EEPM Interface port */
-#define	W_PAR0		0xaa	/* write physical address register 0 */
-#define	W_PAR1		0xab	/* write physical address register 1 */
-#define	W_PAR2		0xac	/* write physical address register 2 */
-#define	W_PAR3		0xad	/* write physical address register 3 */
-#define	W_PAR4		0xae	/* write physical address register 4 */
-#define	W_PAR5		0xaf	/* write physical address register 5 */
-
-/* IDC 2 Command */
-#define	R_STS		0xc0	/* read status register */
-#define	R_CPR		0xc1	/* read current page register */
-#define	R_BPR		0xc2	/* read boundary page register */
-#define	R_TDR		0xc3	/* read time domain reflectometry reg */
-
-/* STATUS Register */
-#define EEDI		0x80	/* EEPM DO pin */
-#define TXSUC		0x40	/* tx success */
-#define T16		0x20	/* tx fail 16 times */
-#define TS1		0x40	/* 0=Tx success, 1=T16 */
-#define TS0		0x20	/* 0=Tx success, 1=T16 */
-#define RXGOOD		0x10	/* rx a good packet */
-#define RXCRC		0x08	/* rx a CRC error packet */
-#define RXSHORT		0x04	/* rx a short packet */
-#define COLS		0x02	/* coaxial collision status */
-#define LNKS		0x01	/* UTP link status */
-
-/* Command Register */
-#define CLEAR		0x10	/* reset part of hardware */
-#define NOPER		0x08	/* No Operation */
-#define RNOP		0x08
-#define RRA		0x06	/* After RR then auto-advance NPR & BPR(=NPR-1) */
-#define RRN		0x04	/* Normal Remote Read mode */
-#define RW1		0x02	/* Remote Write tx buffer 1  ( page 6 - 11 ) */
-#define RW0		0x00	/* Remote Write tx buffer 0  ( page 0 - 5 ) */
-#define TXEN		0x01	/* 0->1 tx enable */
-
-/* System Configuration Register */
-#define TESTON		0x80	/* test host data transfer reliability */
-#define SLEEP		0x40	/* sleep mode */
-#if 0
-#define FASTMODE	0x04	/* fast mode for intel 82360SL fast mode */
-#define BYTEMODE	0x02	/* byte mode */
-#else
-#define FASTMODE	0x20	/* fast mode for intel 82360SL fast mode */
-#define BYTEMODE	0x10	/* byte mode */
-#endif
-#define NIBBLEMODE	0x00	/* nibble mode */
-#define IRQINV		0x08	/* turn off IRQ line inverter */
-#define IRQNML		0x00	/* turn on IRQ line inverter */
-#define INTON		0x04
-#define AUTOFFSET	0x02	/* auto shift address to TPR+12 */
-#define AUTOTX		0x01	/* auto tx when leave RW mode */
-
-/* Transceiver Configuration Register */
-#define JABBER		0x80	/* generate jabber condition */
-#define TXSUCINT	0x40	/* enable tx success interrupt */
-#define T16INT		0x20	/* enable T16 interrupt */
-#define RXERRPKT	0x10	/* accept CRC error or short packet */
-#define EXTERNALB2	0x0C	/* external loopback 2 */
-#define EXTERNALB1	0x08	/* external loopback 1 */
-#define INTERNALB	0x04	/* internal loopback */
-#define NMLOPERATE	0x00	/* normal operation */
-#define RXPBM		0x03	/* rx physical, broadcast, multicast */
-#define RXPB		0x02	/* rx physical, broadcast */
-#define RXALL		0x01	/* rx all packet */
-#define RXOFF		0x00	/* rx disable */