drivers: net: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 30 insertions, 30 deletions

diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig
index a5e2bcbf2722..264a482ec31d 100644
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -21,17 +21,17 @@ config NET_VENDOR_ALLWINNER
 if NET_VENDOR_ALLWINNER
 
 config SUN4I_EMAC
-        tristate "Allwinner A10 EMAC support"
+	tristate "Allwinner A10 EMAC support"
 	depends on ARCH_SUNXI
 	depends on OF
 	select CRC32
 	select MII
 	select PHYLIB
 	select MDIO_SUN4I
-        ---help---
-          Support for Allwinner A10 EMAC ethernet driver.
+	---help---
+	  Support for Allwinner A10 EMAC ethernet driver.
 
-          To compile this driver as a module, choose M here.  The module
-          will be called sun4i-emac.
+	  To compile this driver as a module, choose M here.  The module
+	  will be called sun4i-emac.
 
 endif # NET_VENDOR_ALLWINNER
diff --git a/drivers/net/ethernet/emulex/benet/Kconfig b/drivers/net/ethernet/emulex/benet/Kconfig
index e8c7eb842dbe..17d300ea9955 100644
--- a/drivers/net/ethernet/emulex/benet/Kconfig
+++ b/drivers/net/ethernet/emulex/benet/Kconfig
@@ -48,5 +48,5 @@ config BE2NET_SKYHAWK
 	  chipsets. (e.g. OneConnect OCe14xxx)
 
 comment "WARNING: be2net is useless without any enabled chip"
-        depends on BE2NET_BE2=n && BE2NET_BE3=n && BE2NET_LANCER=n && \
+	depends on BE2NET_BE2=n && BE2NET_BE3=n && BE2NET_LANCER=n && \
 	BE2NET_SKYHAWK=n && BE2NET
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index 0dba272a5b2f..a1f20b205299 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -20,15 +20,15 @@ config MLX5_ACCEL
 	bool
 
 config MLX5_FPGA
-        bool "Mellanox Technologies Innova support"
-        depends on MLX5_CORE
+	bool "Mellanox Technologies Innova support"
+	depends on MLX5_CORE
 	select MLX5_ACCEL
-        ---help---
-          Build support for the Innova family of network cards by Mellanox
-          Technologies. Innova network cards are comprised of a ConnectX chip
-          and an FPGA chip on one board. If you select this option, the
-          mlx5_core driver will include the Innova FPGA core and allow building
-          sandbox-specific client drivers.
+	---help---
+	  Build support for the Innova family of network cards by Mellanox
+	  Technologies. Innova network cards are comprised of a ConnectX chip
+	  and an FPGA chip on one board. If you select this option, the
+	  mlx5_core driver will include the Innova FPGA core and allow building
+	  sandbox-specific client drivers.
 
 config MLX5_CORE_EN
 	bool "Mellanox 5th generation network adapters (ConnectX series) Ethernet support"
@@ -58,14 +58,14 @@ config MLX5_EN_RXNFC
 	  API.
 
 config MLX5_MPFS
-        bool "Mellanox Technologies MLX5 MPFS support"
-        depends on MLX5_CORE_EN
+	bool "Mellanox Technologies MLX5 MPFS support"
+	depends on MLX5_CORE_EN
 	default y
-        ---help---
+	---help---
 	  Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS)
-          support in ConnectX NIC. MPFs is required for when multi-PF configuration
-          is enabled to allow passing user configured unicast MAC addresses to the
-          requesting PF.
+	  support in ConnectX NIC. MPFs is required for when multi-PF configuration
+	  is enabled to allow passing user configured unicast MAC addresses to the
+	  requesting PF.
 
 config MLX5_ESWITCH
 	bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
@@ -73,10 +73,10 @@ config MLX5_ESWITCH
 	default y
 	---help---
 	  Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
-          E-Switch provides internal SRIOV packet steering and switching for the
-          enabled VFs and PF in two available modes:
-                Legacy SRIOV mode (L2 mac vlan steering based).
-                Switchdev mode (eswitch offloads).
+	  E-Switch provides internal SRIOV packet steering and switching for the
+	  enabled VFs and PF in two available modes:
+	        Legacy SRIOV mode (L2 mac vlan steering based).
+	        Switchdev mode (eswitch offloads).
 
 config MLX5_CORE_EN_DCB
 	bool "Data Center Bridging (DCB) Support"
diff --git a/drivers/net/ethernet/nxp/Kconfig b/drivers/net/ethernet/nxp/Kconfig
index 418afb84c84b..ee83a71c2509 100644
--- a/drivers/net/ethernet/nxp/Kconfig
+++ b/drivers/net/ethernet/nxp/Kconfig
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config LPC_ENET
-        tristate "NXP ethernet MAC on LPC devices"
-        depends on ARCH_LPC32XX || COMPILE_TEST
-        select PHYLIB
-        help
+	tristate "NXP ethernet MAC on LPC devices"
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	select PHYLIB
+	help
 	  Say Y or M here if you want to use the NXP ethernet MAC included on
 	  some NXP LPC devices. You can safely enable this option for LPC32xx
 	  SoC. Also available as a module.
diff --git a/drivers/net/ethernet/pensando/Kconfig b/drivers/net/ethernet/pensando/Kconfig
index 5ea570be8379..bd0583e409df 100644
--- a/drivers/net/ethernet/pensando/Kconfig
+++ b/drivers/net/ethernet/pensando/Kconfig
@@ -26,7 +26,7 @@ config IONIC
 	  found in
 	  <file:Documentation/networking/device_drivers/pensando/ionic.rst>.
 
-          To compile this driver as a module, choose M here. The module
-          will be called ionic.
+	  To compile this driver as a module, choose M here. The module
+	  will be called ionic.
 
 endif # NET_VENDOR_PENSANDO