diff options
| author | Stefan Wahren | 2021-05-08 14:36:34 +0200 |
|---|---|---|
| committer | David S. Miller | 2021-05-10 14:29:18 -0700 |
| commit | 6e03f3ff29c1b479cd10cab0d1c4530bafad601c (patch) | |
| tree | bd2bd35ef9b44baa98f7d59f90721866ec712cfd /drivers/net/ethernet | |
| parent | b76078df15935b54c353eb0461c95a6eaf73c7ca (diff) | |
net: qca_spi: Avoid re-sync for single signature error
Setting a new network key would cause a reset of the QCA7000. Usually
the driver only notice the SPI interrupt and a single signature error.
So avoid the whole re-sync process (possible packet loss, transmit queue
stop and no carrier for at least 1 second) in this case.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/qualcomm/qca_spi.c | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 3e2a54c2fc83..0937ceb08296 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -524,8 +524,11 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event) switch (qca->sync) { case QCASPI_SYNC_READY: - /* Read signature, if not valid go to unknown state. */ + /* Check signature twice, if not valid go to unknown state. */ qcaspi_read_register(qca, SPI_REG_SIGNATURE, &signature); + if (signature != QCASPI_GOOD_SIGNATURE) + qcaspi_read_register(qca, SPI_REG_SIGNATURE, &signature); + if (signature != QCASPI_GOOD_SIGNATURE) { qca->sync = QCASPI_SYNC_UNKNOWN; netdev_dbg(qca->net_dev, "sync: bad signature, restart\n"); |