diff options
author | Marek BehĂșn | 2021-04-07 22:22:43 +0200 |
---|---|---|
committer | David S. Miller | 2021-04-08 13:15:33 -0700 |
commit | f8ee45fcbc5a94177d031b22f4e5a47d45874037 (patch) | |
tree | 5e1901115f7493d3cbd8e8163b9e0feebf146acc /drivers/net/phy/marvell10g.c | |
parent | 9893f31690162bf90ef7f85d9dda80731696d586 (diff) |
net: phy: marvell10g: add all MACTYPE definitions for 88X33x0
Add all MACTYPE definitions for 88X3310, 88X3310P, 88X3340 and 88X3340P.
In order to have consistent naming, rename
MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH to
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH.
Signed-off-by: Marek BehĂșn <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/marvell10g.c')
-rw-r--r-- | drivers/net/phy/marvell10g.c | 18 |
1 files changed, 13 insertions, 5 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 7552a658a513..7d9a45437b69 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -78,10 +78,18 @@ enum { /* Vendor2 MMD registers */ MV_V2_PORT_CTRL = 0xf001, - MV_V2_PORT_CTRL_PWRDOWN = BIT(11), - MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), - MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH = 0x6, + MV_V2_PORT_CTRL_PWRDOWN = BIT(11), + MV_V2_33X0_PORT_CTRL_SWRST = BIT(15), + MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI = 0x0, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH = 0x1, + MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN = 0x1, + MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH = 0x2, + MV_V2_3310_PORT_CTRL_MACTYPE_XAUI = 0x3, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER = 0x4, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5, + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6, + MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7, /* Temperature control/read registers (88X3310 only) */ MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000, @@ -480,7 +488,7 @@ static int mv3310_config_init(struct phy_device *phydev) if (val < 0) return val; priv->rate_match = ((val & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK) == - MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH); + MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH); /* Enable EDPD mode - saving 600mW */ return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); |